Anelok

From Qi-Hardware
Jump to: navigation, search

Contents

[edit] Anelok

[edit] Y-Cable

[edit] Gerber file

[edit] 20150114

[edit] Flash

[edit] Bombined binary

  • dd bs=16k conv=sync if=boot-2014.bin of=combined.bin; cat anelok-2014.bin >>combined.bin
  • swd combined.bin

[edit] Log

root@BenNanoNote:~# ./swd boot-2014.bin 
Cortex M0+
AP #1 ID 0x001c0020 (MDM-AP)
AP #0 ID 0x04770031 (AHB-AP)
SDID 0x26151504: Kinetis KL26 rev 1.10, 128 kB Flash, 16 kB RAM, 48-pin
##########################0x00000c48: expected 0x40072000 got 0xffffffff---|
...
---------------------------------------------------access error
...
###########################################################################|

[edit] Boards

[edit] Batch 1 (10 boards)

#1-#4 Works fine
#5 Not boot. needs time to debug
#6 USB connector pads broke 
#7 Replaced USB connector with a correct one.
#8-#10 Wrong USB connector
Personal tools
Namespaces
Variants
Actions
Navigation
interactive
Toolbox
Print/export