Updating Ben NanoNote software
From Qi-Hardware
How to update the built-in software on the Ben NanoNote
- Read about The NAND in the Ben NanoNote, in particular about pages and blocks
- Install xburst-tools
- Choose one of the three methods below to re-flash the NAND
- reflash_ben.sh -- easiest but least likely to work perfectly
- Updating Ben with usbboot -- more involved and more likely to work
- Updating Ben with an SD -- more work but very reliable ( requires a micro-SD card)
Regardless of the method you use:
|
DO NOT USE A USB HUB. Make sure your NanoNote is directly connected to a Linux PC |
|
DO NOT USE LINUX VIRTUAL MACHINE running in your Windows or MacOS pc |
