Updating Ben NanoNote software

How to update the built-in software on the Ben NanoNote

• Read about The NAND in the Ben NanoNote, in particular about pages and blocks
• Install xburst-tools
• Choose one of the three methods below to re-flash the NAND

1. reflash_ben.sh -- easiest and recommended way
2. Updating Ben with usbboot -- more involved
3. Updating Ben with an SD -- even more work ( requires a micro-SD card)

Regardless of the method you use:

DO NOT USE A USB HUB. Make sure your NanoNote is directly connected to a Linux PC