Talk:USB BOOT mode
Why is the “Power + [U]” method not mentioned here? Is the result different? One of the mailing list messages suggests it might have been recently added, but I do see on my shipped NanoNote, in /proc/bus/usb/devices after “Power + [U]”:
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 85 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=601a ProdID=4740 Rev= 1.00 S: Manufacturer=Ingenic S: Product=JZ4740 USB Boot Device C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=50 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Wolfram
Hi Wolfram just added one line to this page.
xiangfu
Contents
| Thread title | Replies | Last modified |
|---|---|---|
| Picture rubber button | 1 | 16:02, 2 November 2010 |
| Alternative shorting methods | 0 | 18:22, 25 August 2010 |
| missing cross link | 1 | 14:42, 6 April 2010 |
Why is the “Power + [U]” method not mentioned here? Is the result different? One of the mailing list messages suggests it might have been recently added, but I do see on my shipped NanoNote, in /proc/bus/usb/devices after “Power + [U]”:
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 85 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=601a ProdID=4740 Rev= 1.00 S: Manufacturer=Ingenic S: Product=JZ4740 USB Boot Device C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=50 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Wolfram
Hi Wolfram just added one line to this page.
xiangfu
Why is the “Power + [U]” method not mentioned here? Is the result different? One of the mailing list messages suggests it might have been recently added, but I do see on my shipped NanoNote, in /proc/bus/usb/devices after “Power + [U]”:
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 85 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=601a ProdID=4740 Rev= 1.00 S: Manufacturer=Ingenic S: Product=JZ4740 USB Boot Device C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=50 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Wolfram
Hi Wolfram just added one line to this page.
xiangfu
Why is the “Power + [U]” method not mentioned here? Is the result different? One of the mailing list messages suggests it might have been recently added, but I do see on my shipped NanoNote, in /proc/bus/usb/devices after “Power + [U]”:
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 85 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=601a ProdID=4740 Rev= 1.00 S: Manufacturer=Ingenic S: Product=JZ4740 USB Boot Device C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=50 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Wolfram
Hi Wolfram just added one line to this page.
xiangfu
Why is the “Power + [U]” method not mentioned here? Is the result different? One of the mailing list messages suggests it might have been recently added, but I do see on my shipped NanoNote, in /proc/bus/usb/devices after “Power + [U]”:
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 85 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=601a ProdID=4740 Rev= 1.00 S: Manufacturer=Ingenic S: Product=JZ4740 USB Boot Device C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=50 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Wolfram
Hi Wolfram just added one line to this page.
xiangfu
Why is the “Power + [U]” method not mentioned here? Is the result different? One of the mailing list messages suggests it might have been recently added, but I do see on my shipped NanoNote, in /proc/bus/usb/devices after “Power + [U]”:
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 85 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=601a ProdID=4740 Rev= 1.00 S: Manufacturer=Ingenic S: Product=JZ4740 USB Boot Device C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=50 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Wolfram
Hi Wolfram just added one line to this page.
xiangfu
