Editing Talk:USB BOOT mode

From Qi-Hardware
Revision as of 18:48, 3 March 2010 by Wolfram (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Why is the “Power + [U]” method not mentioned here? Is the result different? One of the mailing list messages suggests it might have been recently added, but I do see on my shipped NanoNote, in /proc/bus/usb/devices after “Power + [U]”: 

T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 85 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=601a ProdID=4740 Rev= 1.00
S:  Manufacturer=Ingenic
S:  Product=JZ4740 USB Boot Device
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  2mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=50 Driver=(none)
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Wolfram

Start a new discussion
 

Contents

Thread titleRepliesLast modified
Picture rubber button116:02, 2 November 2010
Alternative shorting methods018:22, 25 August 2010
missing cross link114:42, 6 April 2010

Picture rubber button

Why is the “Power + [U]” method not mentioned here? Is the result different? One of the mailing list messages suggests it might have been recently added, but I do see on my shipped NanoNote, in /proc/bus/usb/devices after “Power + [U]”: 

T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 85 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=601a ProdID=4740 Rev= 1.00
S:  Manufacturer=Ingenic
S:  Product=JZ4740 USB Boot Device
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  2mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=50 Driver=(none)
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Wolfram

Samgee‎18:21, 25 August 2010

Why is the “Power + [U]” method not mentioned here? Is the result different? One of the mailing list messages suggests it might have been recently added, but I do see on my shipped NanoNote, in /proc/bus/usb/devices after “Power + [U]”: 

T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 85 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=601a ProdID=4740 Rev= 1.00
S:  Manufacturer=Ingenic
S:  Product=JZ4740 USB Boot Device
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  2mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=50 Driver=(none)
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Wolfram

Xiangfu‎16:02, 2 November 2010
 

Alternative shorting methods

Why is the “Power + [U]” method not mentioned here? Is the result different? One of the mailing list messages suggests it might have been recently added, but I do see on my shipped NanoNote, in /proc/bus/usb/devices after “Power + [U]”: 

T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 85 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=601a ProdID=4740 Rev= 1.00
S:  Manufacturer=Ingenic
S:  Product=JZ4740 USB Boot Device
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  2mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=50 Driver=(none)
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Wolfram

Samgee‎18:22, 25 August 2010

Warning: You are not logged in.

Your IP address will be recorded in this page's edit history.

Please note that all contributions to Qi-Hardware may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see Qi-Hardware:Copyrights for details). Do not submit copyrighted work without permission!

Cancel | Editing help (opens in new window)
 

missing cross link

Why is the “Power + [U]” method not mentioned here? Is the result different? One of the mailing list messages suggests it might have been recently added, but I do see on my shipped NanoNote, in /proc/bus/usb/devices after “Power + [U]”: 

T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 85 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=601a ProdID=4740 Rev= 1.00
S:  Manufacturer=Ingenic
S:  Product=JZ4740 USB Boot Device
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  2mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=50 Driver=(none)
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Wolfram

Mdt‎14:56, 5 April 2010

Why is the “Power + [U]” method not mentioned here? Is the result different? One of the mailing list messages suggests it might have been recently added, but I do see on my shipped NanoNote, in /proc/bus/usb/devices after “Power + [U]”: 

T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 85 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=601a ProdID=4740 Rev= 1.00
S:  Manufacturer=Ingenic
S:  Product=JZ4740 USB Boot Device
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  2mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=50 Driver=(none)
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Wolfram

Xiangfu‎14:42, 6 April 2010
 
Retrieved from "http://en.qi-hardware.com/wiki/Talk:USB_BOOT_mode#missing_cross_link_14"
Personal tools
Namespaces
Variants
Actions
Navigation
interactive
Toolbox
Print/export