Reflash ben.sh

Updating the internal software on the Ben NanoNote using the reflash-ben.sh script.

$ wget http://downloads.qi-hardware.com/software/images/Ben_NanoNote_2GB_NAND/reflash_ben.sh
$ chmod +x reflash_ben.sh

Boot your NanoNote into USB BOOT mode. As soon as lsusb (on your Linux PC) lists a new device, run reflash_ben.sh. This will download some pre-built images and (re)flash the NanoNote.

$ sudo ./reflash_ben.sh

Afterwards, reboot your NanoNote. First, you will see

- preinit -                                                                     
Press CTRL-C for failsafe

After a while, you will see Please press Enter to activate this console. on the console of your NanoNote.