Milkymist One RC3 PCB Specification

From Qi-Hardware
Revision as of 08:06, 20 June 2011 by Adamwang (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Contents

PCB Specification

MM1 RC3 pcb definition of stack up which is same as RC2 and RC1.

In general, your pcb specifications needed to be defined well at initial stage of kicking off project. So you can just list specifications as below with your final gerber files enclosed an engineering confirmation checklist, and all send them out. Your pcb maker will make pcb for you. Please note, pcb manufacturers after receiving gerber, usually a more detailed breakdown of the production of works recognized.

  • Six Layers PCB
  • Board Dimensions 150mm x 125mm in piece, 158mm x 133mm in panel
  • 10mil drill via hole pth
  • top & bot line width/line clearance, 5mils/5mils
  • top & bot 5mil annular rings
  • 1.6mm +- 0.05 mm thickness.
  • FR4
  • Components placed on TOP & BOT layer.
  • Stacking of layers: 1st layer Top/Compnents/Signals, 2nd layer Gnd, 3rd layer Signal, 4th layer Gnd, 5th layer Power, 6th layer Bottom/Components/Signals.

Board Layout

The gerber files and drill file are under http://downloads.qi-hardware.com/hardware/milkymist_one/gerber/rc3/.

PDF file.

File:MM1 RC3 PCB DESIGNs.pdf
Design File in PDF



PCB & Parts Reference

  • front view image

  • back view image

Different Views of Milkymist One board

  • PCB & Parts Reference
  • M1rc3 pcba mounted top side.JPG

    Top side view

  • M1rc3 pcba mounted bottom side.JPG

    Bot side view

  • M1rc3 parts on pcb rca side view.JPG

    RCA connectors side view

QA Outgoing Inspection Report from PCB maker

The following inspections based on your data sent to pcb maker. Those details of inspection report would exactly more than yours.

New Heart Corporation Outgoing Report PDF file.

File:NewHeart m1rc3 outgoing report.pdf
Design File in PDF



Micro Section of PCB

To be Updated pictures soon.

  • Mm1 rc3 pcb stack up.png

    PCB stack up is made at initial stage of routing. In general this data is defined by customer design side not pcb maker. So if you don't request pcb maker follow a specific stack up, they will use the most popular stack up. You should ask pcb maker to provide this data. For MM1 project, we defined this to let pcb maker follow it.

  • M1 rc3 microsection NH06-004047 K231-6002.png

    PCB Maker used J3 reference to do the microsection inspection.

Notification

Links

Retrieved from "http://en.qi-hardware.com/wiki/Milkymist_One_RC3_PCB_Specification"
Personal tools
Namespaces
Variants
Actions
Navigation
interactive
Toolbox
Print/export