Milkymist One RC1 PCB Specification
Contents |
PCB Specification
In general, your pcb specifications needed to be defined well at initial stage of kicking off project. So you can just list specifications as below with your final gerber files enclosed an engineering confirmation checklist, and all send them out. Your pcb maker will make pcb for you.
- Six Layers PCB
- Board Dimensions 150mm x 125mm in piece, 158mm x 133mm in panel
- 10mil drill via hole pth
- top & bot line width/line clearance, 5mils/5mils
- top & bot 5mil annular rings
- 1.6mm +- 0.05 mm thickness.
- FR4
- Components placed on TOP & BOT layer.
- Stacking of layers: 1st layer Top/Compnents/Signals, 2nd layer Gnd, 3rd layer Signal, 4th layer Gnd, 5th layer Power, 6th layer Bottom/Components/Signals.
Board Layout
The gerber files and drill file are under http://downloads.qi-hardware.com/hardware/milkymist_one/gerber/rc1/.
PDF file.
PCB & Parts Reference
Top side PCB
Bot side PCB
Top side Parts Reference
Bot side Parts Reference
Different Views of Milkymist One board
- PCB & Parts Reference
Top side view
Bot side view
DMX side view
RCA connectors side view
USB connectors side view
VGA connectors side view
QA Outgoing Inspection Report from PCB maker
The following inspections based on your data sent to pcb maker. Those details of inspection report would exactly more than yours.
QA Outgoing Inspection Report1.
QA Outgoing Inspection Report2.
QA Outgoing Inspection Report3.
Micro Section of PCB
PCB stack up is made at initial stage of routing. In general this data is defined by customer design side not pcb maker. So if you don't request pcb maker follow a specific stack up, they will use the most popular stack up. You should ask pcb maker to provide this data. For MM1 project, we defined this to let pcb maker follow it.
PCB Maker used J3 reference to do the microsection inspection.
J3 microsection view. The pins from left to right is: J3-9, J3-11, J3-13, J3-15. With this microsection view, you can check the each layer's thickness about stack up defined.
Measured 1.4mil distance.
Used plastic elements to protect the microsection of sample and send to customer for reserving and checking. The pins from left to right is: J3-7, J3-9, J3-11, J3-13, J3-15, J3-17.
J3 microsection view.
J3 microsection top left.
J3 microsection top right.
J3 microsection bottom left.
J3 microsection bottom right.
Impedance Report
| Layers for Via | Trace Width | PCB Number | Average Value | Maximum Value | Minimum Value | Meassured Date | Measured Time |
|---|---|---|---|---|---|---|---|
| L1-L2 | 6MIL | 01 | 89.22 | 90.47 | 87.82 | 27/05/10 | 17:39 |
| L3-L2 | 6MIL | 01 | 97.16 | 98.97 | 94.14 | 27/05/10 | 17:39 |
| L1-L2 | 5MIL | 01 | 94.11 | 95.32 | 92.60 | 27/05/10 | 17:39 |
| L6-L5 | 5MIL | 01 | 98.26 | 99.82 | 96.15 | 27/05/10 | 17:39 |
| L3-L2 | 20MIL | 01 | 51.51 | 53.00 | 50.05 | 27/05/10 | 17:39 |
| L1-L2 | 6MIL | 02 | 95.45 | 96.53 | 93.88 | 27/05/10 | 17:39 |
| L3-L2 | 6MIL | 02 | 96.03 | 98.76 | 94.73 | 27/05/10 | 17:39 |
| L1-L2 | 5MIL | 02 | 104.96 | 106.56 | 102.86 | 27/05/10 | 17:39 |
| L6-L5 | 5MIL | 02 | 102.42 | 104.32 | 99.46 | 27/05/10 | 17:39 |
| L3-L2 | 20MIL | 02 | 51.83 | 53.31 | 50.99 | 27/05/10 | 17:39 |
| L1-L2 | 6MIL | 03 | 96.30 | 97.89 | 94.44 | 27/05/10 | 17:40 |
| L3-L2 | 6MIL | 03 | 95.82 | 97.35 | 94.80 | 27/05/10 | 17:40 |
| L1-L2 | 5MIL | 03 | 103.71 | 105.82 | 100.14 | 27/05/10 | 17:40 |
| L6-L5 | 5MIL | 03 | 102.60 | 104.53 | 99.75 | 27/05/10 | 17:40 |
| L3-L2 | 20MIL | 03 | 51.59 | 53.52 | 50.29 | 27/05/10 | 17:40 |
| L1-L2 | 6MIL | 04 | 91.89 | 93.71 | 89.77 | 27/05/10 | 17:40 |
| L3-L2 | 6MIL | 04 | 95.68 | 98.23 | 93.58 | 27/05/10 | 17:40 |
| L1-L2 | 5MIL | 04 | 97.88 | 99.89 | 95.35 | 27/05/10 | 17:40 |
| L6-L5 | 5MIL | 04 | 92.87 | 94.96 | 90.29 | 27/05/10 | 17:40 |
| L3-L2 | 20MIL | 04 | 51.64 | 52.95 | 50.79 | 27/05/10 | 17:40 |
| L1-L2 | 6MIL | 05 | 94.60 | 95.93 | 93.05 | 27/05/10 | 17:40 |
| L3-L2 | 6MIL | 05 | 95.96 | 98.88 | 93.81 | 27/05/10 | 17:40 |
| L1-L2 | 5MIL | 05 | 102.78 | 103.91 | 100.70 | 27/05/10 | 17:40 |
| L6-L5 | 5MIL | 05 | 103.10 | 105.69 | 100.92 | 27/05/10 | 17:40 |
| L3-L2 | 20MIL | 05 | 52.13 | 53.89 | 50.90 | 27/05/10 | 17:40 |
| L1-L2 | 6MIL | 06 | 91.50 | 92.61 | 89.84 | 27/05/10 | 17:41 |
| L3-L2 | 6MIL | 06 | 94.35 | 95.77 | 93.53 | 27/05/10 | 17:41 |
| L1-L2 | 5MIL | 06 | 99.20 | 101.14 | 97.06 | 27/05/10 | 17:41 |
| L6-L5 | 5MIL | 06 | 94.20 | 96.02 | 92.13 | 27/05/10 | 17:41 |
| L3-L2 | 20MIL | 06 | 49.95 | 51.97 | 48.63 | 27/05/10 | 17:41 |
| L1-L2 | 6MIL | 07 | 94.18 | 95.48 | 92.22 | 27/05/10 | 17:41 |
| L3-L2 | 6MIL | 07 | 95.69 | 96.87 | 94.81 | 27/05/10 | 17:41 |
| L1-L2 | 5MIL | 07 | 103.70 | 104.18 | 102.49 | 27/05/10 | 17:41 |
| L6-L5 | 5MIL | 07 | 103.95 | 106.10 | 101.71 | 27/05/10 | 17:41 |
| L3-L2 | 20MIL | 07 | 51.19 | 53.12 | 49.78 | 27/05/10 | 17:41 |
| L1-L2 | 6MIL | 08 | 85.59 | 87.33 | 84.01 | 27/05/10 | 17:42 |
| L3-L2 | 6MIL | 08 | 96.17 | 97.94 | 94.53 | 27/05/10 | 17:42 |
| L1-L2 | 5MIL | 08 | 100.13 | 101.42 | 98.67 | 27/05/10 | 17:42 |
| L6-L5 | 5MIL | 08 | 91.74 | 92.56 | 90.68 | 27/05/10 | 17:42 |
| L3-L2 | 20MIL | 08 | 51.78 | 53.57 | 50.53 | 27/05/10 | 17:42 |
| L1-L2 | 6MIL | 09 | 91.90 | 93.99 | 88.64 | 27/05/10 | 17:42 |
| L3-L2 | 6MIL | 09 | 95.47 | 97.30 | 93.96 | 27/05/10 | 17:42 |
| L1-L2 | 5MIL | 09 | 100.07 | 102.69 | 95.21 | 27/05/10 | 17:42 |
| L6-L5 | 5MIL | 09 | 104.40 | 107.47 | 101.44 | 27/05/10 | 17:42 |
| L3-L2 | 20MIL | 09 | 51.06 | 52.81 | 49.76 | 27/05/10 | 17:42 |
| L1-L2 | 6MIL | 10 | 93.44 | 95.24 | 91.59 | 27/05/10 | 17:43 |
| L3-L2 | 6MIL | 10 | 96.08 | 97.40 | 94.30 | 27/05/10 | 17:43 |
| L1-L2 | 5MIL | 10 | 101.80 | 104.01 | 98.28 | 27/05/10 | 17:43 |
| L6-L5 | 5MIL | 10 | 102.25 | 103.75 | 100.15 | 27/05/10 | 17:43 |
| L3-L2 | 20MIL | 10 | 51.02 | 53.11 | 49.49 | 27/05/10 | 17:43 |
