JTAG Serial Cable run2 for Milkymist One
From Qi-Hardware
Contents |
Schedule
| Item | Description | Planned Start date | Status |
|---|---|---|---|
| KiCad design file, | Notice: Any derivative work from here, you should completely read all test results and take works yourself. If you found error, please let us know about them. | Done | |
| KiCad to BOM | KiCad generates lst file | Done | |
| KiCad to Digi-Key/Mouser/Sharism | boom generates shopping list / Order status | Done | |
| Single gerber-Out to PCB maker | In Progress | ||
| KiCad to AI file | Not yet | ||
| Engineering files to SMT manufacturer | Not yet | ||
| [Tests & Results] | Not yet |
Change Notes
- place C27 and C28 away from J6's housing (P/N: Molex 87832-1420) on Milkymist One board when hooking up, see [1]
run 1: BEFORE change
run 1: BEFORE change
run 2: AFTER change
- lengthen one side of board edge to 1.6mm to let J6's housing on M1 not collide U1's body, U1, R1, R2, R12, R13 are all moved down 1.6mm.
run 1: BEFORE change
run 1: BEFORE change
run 2: AFTER change
Links
- JTAG Serial Cable run 1 for Milkymist One
- Milkymist JTAG-serial daughterboard
- http://www.milkymist.org/wiki/index.php?title=Flashing_the_Milkymist_One
- http://www.milkymist.org/wiki/index.php?title=JTAG
- Files to parts / pcb / smt manufacturer
- Way to generate Gerber image
