#milkymist IRC log for Wednesday, 2011-09-14

lekernelwpwrak_, maybe halt works. what does the board do when you type the command? do the LEDs go briefly dim lit, and then completely off?07:37
wpwrak_hmm, i'll have to try when the current test run finishes. 512 cycles and counting ...07:38
qi-botThe Openwrt build was successfull, see images here: http://fidelio.qi-hardware.com/~xiangfu/build-milkymist/milkymist-openwrt.minimal-09142011-1229/11:25
GitHub111[rtems-yaffs2] sebhub pushed 2 new commits to master: https://github.com/milkymist/rtems-yaffs2/compare/5e31a3f...5848a7e11:49
GitHub111[rtems-yaffs2/master] C++ compatibility. - Sebastian Huber11:49
GitHub111[rtems-yaffs2/master] Merge branch 'master' of github.com:milkymist/rtems-yaffs2 - Sebastian Huber11:49
qi-botThe Firmware build was successfull, see images here: http://fidelio.qi-hardware.com/~xiangfu/build-milkymist/milkymist-firmware-09142011-1325/13:01
qi-botThe Openwrt build was successfull, see images here: http://fidelio.qi-hardware.com/~xiangfu/build-milkymist/milkymist-openwrt.minimal-09142011-1603/15:00
qi-botThe Firmware build was successfull, see images here: http://fidelio.qi-hardware.com/~xiangfu/build-milkymist/milkymist-firmware-09142011-1700/16:37
qi-botThe Openwrt build was successfull, see images here: http://fidelio.qi-hardware.com/~xiangfu/build-milkymist/milkymist-openwrt.minimal-09142011-1935/18:34
qi-botThe Firmware build was successfull, see images here: http://fidelio.qi-hardware.com/~xiangfu/build-milkymist/milkymist-firmware-09142011-2034/20:10
mwallewpwrak: without looking at the flickernoise source, i guess it does the reconfiguration via icap (and writing the standby bitstream offset before, lekernel?)20:36
mwallewhich should be the same as using jtag with cfg_in20:36
wpwrakthat would be convenient. because that's something i already know how to do :)20:38
mwallebtw i tried to port your script to urjtags reconfigure command20:39
mwalleit works every second time20:40
wpwraki'm still fighting with the repeatability of the corruption. i had it strike after ~4 hours, then after ~13.5 hours, then after ~2 hours, and now 24 hours have gone by without anything happening :-( (that's always with power cycling. 24 hours = ~1100 cycles)20:41
wpwrak(every second time) oh, interesting :)20:41
wpwrakthat would be  pld reconfigure <address>  ?20:42
mwallethe first time the command seems to set the address, and the second time triggers something20:42
mwallewpwrak: yep20:42
wpwrakwhen you try my script, does it work each time ? or also only every 2nd time ?20:43
mwalleiirc each time ;)20:43
wpwrakthen it should be easy to debug :)20:44
wpwrakA works, B doens't. find the difference :)20:45
mwallewpwrak: yeah but no time too look further at it atm ;)21:20
qi-botThe Openwrt build was successfull, see images here: http://fidelio.qi-hardware.com/~xiangfu/build-milkymist/milkymist-openwrt.minimal-09142011-2309/22:05
lekernelmwalle, yes, it does (but the icap code is in the rtems bsp)23:07
lekernelalso, a software shutdown should make sure that no flash operation is in progress when the standby bitstream is reloaded - using "pld reconfigure" won't23:08
qi-botThe Firmware build was successfull, see images here: http://fidelio.qi-hardware.com/~xiangfu/build-milkymist/milkymist-firmware-09152011-0005/23:41
--- Thu Sep 15 201100:00

Generated by irclog2html.py 2.9.2 by Marius Gedminas - find it at mg.pov.lt!