| wolfspraul | a short update from Adam: he has now applied fix2 to 70 boards already, and will finish all of them, probably by the end of today | 04:01 |
|---|---|---|
| wolfspraul | then a batch of impedance/power-on/reflash testing, then we see | 04:01 |
| wolfspraul | most likely that'll be tomorrow | 04:02 |
| GitHub116 | [linux-milkymist] larsclausen pushed 1 new commit to master: https://github.com/milkymist/linux-milkymist/commit/54b8f87dadb0cf99ccacfedbc5212ebb747f9698 | 07:18 |
| GitHub116 | [linux-milkymist/master] lm32: Disable interrupts while restoring irq and syscall stackframe - Lars-Peter Clausen | 07:18 |
| larsc | looks as if it is finanly stable, at least my stress tests don't crash anymore | 07:19 |
| wolfspraul | nice, I should mention that in the news I guess | 07:25 |
| wolfspraul | which linux version is this actually? | 07:29 |
| larsc | 3.0 | 07:32 |
| Alarm | when I load a file "patch" with the command 'first patch', I always get the message 'No patches found' when click on Go? | 09:10 |
| larsc | lekernel: uart "thru" mode is loopback? | 09:12 |
| lekernel | yes | 09:12 |
| lekernel | Alarm, use "configured" mode | 09:13 |
| lekernel | or use the patch editor | 09:13 |
| aw | rc3 status: all reworks done, next to clean all. | 09:42 |
| Alarm | k thank you. It works. | 09:44 |
| Alarm | For FTP, DHCP is not working? I set to manual IP address | 09:44 |
| lekernel | dhcp is working, or should be ... | 09:45 |
| wolfspraul | aw: phew, great! | 09:54 |
| roh | uh. aw. you are fast | 10:12 |
| roh | :) | 10:12 |
| aw | roh, :) try to test them tomorrow. my soldering status will be approved then. before each board gets test surely I need to visually inspect and measured myself. :) | 10:15 |
| roh | i should hurry up completing the glueing today | 10:16 |
| aw | roh, sounds good news from you. :) | 10:18 |
| wpwrak | roh: new job title: "glue sniffer" ;-) | 10:25 |
| Action: lekernel found a wiki engine that sucks more than mediawiki: the redmine wiki | 10:52 | |
| lekernel | in fact, I wonder what is worse, spam dousing or the most obscure syntax ever | 10:54 |
| Action: methril_work nods about redminke wiki engine | 11:17 | |
| methril_work | morning | 11:17 |
| GitHub11 | [uclibc-lm32] larsclausen pushed 4 new commits to master: https://github.com/milkymist/uclibc-lm32/compare/679f42b...71624d5 | 11:46 |
| GitHub11 | [uclibc-lm32/master] Merge branch 'master' of github.com:milkymist/uclibc-lm32 - Lars-Peter Clausen | 11:46 |
| GitHub11 | [uclibc-lm32/master] lm32: Drop unused __syscall_return - Lars-Peter Clausen | 11:46 |
| GitHub11 | [uclibc-lm32/master] lm32: Cleanup clone - Lars-Peter Clausen | 11:46 |
| GitHub141 | [linux-milkymist] larsclausen pushed 3 new commits to master: https://github.com/milkymist/linux-milkymist/compare/54b8f87...989f405 | 11:55 |
| GitHub141 | [linux-milkymist/master] lm32: Remove incomplete dts - Lars-Peter Clausen | 11:55 |
| GitHub141 | [linux-milkymist/master] lm32: Speed up aligned memcpy - Lars-Peter Clausen | 11:55 |
| GitHub141 | [linux-milkymist/master] ASoC: Update milkymist platform to the current API - Lars-Peter Clausen | 11:55 |
| Alarm | What procedure must be followed to program the keys of RC5 remote control? | 12:45 |
| wolfspraul | Alarm: do you have an RC5 control that works? | 12:49 |
| Alarm | yes | 12:49 |
| Alarm | philips | 12:49 |
| wolfspraul | did you test it with m1? | 12:49 |
| Alarm | m1? | 12:50 |
| wolfspraul | you go to the IR remote dialog, and press a number on your remote, say '5', you should see the value 0x05 | 12:50 |
| wolfspraul | Milkymist One | 12:50 |
| Alarm | :) | 12:50 |
| wolfspraul | did you try that? | 12:50 |
| wolfspraul | you see the correct number? | 12:50 |
| Alarm | no | 12:51 |
| wolfspraul | I'm asking because the rc5 implementation in the Milkymist SoC right now is very timing sensitive, and will not be as robust/flexible as other rc5 implementations | 12:51 |
| wolfspraul | so it's a bit hyperbole to call it 'rc-5' actually :-) | 12:51 |
| wolfspraul | it's most like "some rc-5" right now | 12:51 |
| wolfspraul | we changed the timing to match the remote we are including with future units, but now some other remotes don't work anymore | 12:52 |
| wolfspraul | the best would be a more robust rc-5 implementation but that's a lot of work and nobody sees it as enough of a priority... | 12:52 |
| Alarm | c'est aleatoire | 12:52 |
| lekernel | on the other hand, it could work with non-RC5 remotes as well by changing the code | 12:52 |
| wolfspraul | Alarm: if you have a philips, maybe if you go back to the old value your remote will work again | 12:53 |
| Alarm | it is an old remote a philips DVD player | 12:54 |
| wolfspraul | do you know how to build the SoC from source? | 12:54 |
| wolfspraul | you can try changing that one value back and maybe you are lucky :-) | 12:54 |
| wpwrak | wolfspraul: no, don't make a better rc5 implementation. make a universal detector that doesn't even try to "understand" the code | 12:55 |
| wolfspraul | we tested a lot of remotes, like 10-15 (all rc5), and with old or new setting _some_ will work, some don't | 12:55 |
| wpwrak | wolfspraul: lekernel promised me one of his old M1 boards if i hack that part. so maybe it'll happen one day ;-) | 12:56 |
| wolfspraul | ok the more flexible you want to make it the more work it will be | 12:56 |
| lekernel | not necessarily | 12:56 |
| lekernel | if it's generic, it can overcome pesky problems like timing variations between remotes | 12:57 |
| wpwrak | more flexible would actually be much simpler :) | 12:57 |
| wolfspraul | alright, I rest my case | 12:57 |
| lekernel | it's less annoying testing | 12:57 |
| wolfspraul | I'll write it on my Santa Claus wishlist this year | 12:57 |
| Action: wpwrak dons the red pointy hat | 13:08 | |
| roh | ~. | 13:08 |
| roh | re | 13:11 |
| aw | rc3: clean done. Let's test impedance tomorrow. :-) | 13:43 |
| larsc | whoa, linux has survived 8h of constantly spawning and exiting processes on the mm one board. that's like the first time ever | 15:16 |
| lekernel | larsc, shall I create a repository for openwrt? | 16:10 |
| lekernel | larsc, this is cool, congratulations :) | 16:10 |
| larsc | repo for openwrt would be nice | 16:15 |
| lekernel | https://github.com/milkymist/openwrt-milkymist | 16:20 |
| lekernel | you should have access already | 16:20 |
| larsc | thanks | 16:20 |
| GitHub18 | [extras-m1] yizhangsh pushed 1 new commit to master: https://github.com/milkymist/extras-m1/commit/5aee94251285c432afdb59ba3b9e35caa3f5f0c5 | 16:41 |
| GitHub18 | [extras-m1/master] add size 285x210 mm brochure artwork. - Yi Zhang | 16:41 |
| GitHub110 | [milkymist] sbourdeauducq pushed 1 new commit to master: https://github.com/milkymist/milkymist/commit/7abd367bf4baead9a7c7473fa2a2f4efec0577db | 17:13 |
| GitHub110 | [milkymist/master] TMU prefetch: flush cache - Sebastien Bourdeauducq | 17:13 |
| GitHub24 | [milkymist] sbourdeauducq pushed 1 new commit to master: https://github.com/milkymist/milkymist/commit/df573f94f9875cf4a2dcee409a6e0f6b83c644be | 17:29 |
| GitHub24 | [milkymist/master] TMU prefetch: fix commit FIFO write indexing - Sebastien Bourdeauducq | 17:29 |
| GitHub23 | [extras-m1] yizhangsh pushed 1 new commit to master: https://github.com/milkymist/extras-m1/commit/d54abfc33748cae0e13f5125f4206dd40cd24434 | 17:51 |
| GitHub23 | [extras-m1/master] added A3 brochure - Yi Zhang | 17:51 |
| kristianpaul | larsc: how wwas the overall performance of your test? | 18:35 |
| kristianpaul | i mean did you check memory and cpu stats as well? | 18:37 |
| larsc | i did not test for performance | 18:37 |
| GitHub92 | [milkymist] sbourdeauducq pushed 1 new commit to master: https://github.com/milkymist/milkymist/commit/c219760cbb34842d8790048fba5b9c61ea664a35 | 19:16 |
| GitHub92 | [milkymist/master] TMU prefetch: faster commit - Sebastien Bourdeauducq | 19:16 |
| mwalle | btw qemu 0.15 is forked | 19:24 |
| lekernel | and does it work? | 19:51 |
| GitHub84 | [milkymist] sbourdeauducq pushed 1 new commit to master: https://github.com/milkymist/milkymist/commit/639f1242e92a976fb33a7c446eb8fa75f8b9ecaf | 19:51 |
| GitHub84 | [milkymist/master] TMU prefetch: even faster commit - Sebastien Bourdeauducq | 19:51 |
| mwalle | lekernel: nope, but the patch was sent last week, i'll request a pull for it | 19:55 |
| GitHub74 | [milkymist] sbourdeauducq pushed 1 new commit to master: https://github.com/milkymist/milkymist/commit/2c430c95c8a06edd24315943e6974d705c8b10dc | 20:16 |
| GitHub74 | [milkymist/master] TMU prefetch: fix qpram read-after-write - Sebastien Bourdeauducq | 20:16 |
| wpwrak | fun idea: if you have a display wall made up of several LCD/plasma screens, perhaps a set of M1 could be used to display things across these screens. would need the ability to pretend do render things off-screen, e.g., if a particle crosses from one screen to the next, M1 #1 would first render it in its visible area, while M1 #2 would pretend to render (tracking the motion) but doesn't show anything. then, when the particle crosses, the | 20:20 |
| wpwrak | roles would be reversed. also needs the ability to synchronize rendering clocks with reasonable accuracy (i guess you could be a few pixels off without anyone noticing, though) | 20:20 |
| kristianpaul | is not that something very common in concerts? | 20:43 |
| wpwrak | should be, yes. and the equipment is probably quite $$$ :) | 20:47 |
| wpwrak | M1 could be a super low-cost alternative if you can find some suitable panels :) | 20:47 |
| GitHub167 | [milkymist] sbourdeauducq pushed 2 new commits to master: https://github.com/milkymist/milkymist/compare/2c430c9...c43799e | 20:51 |
| GitHub167 | [milkymist/master] TMU prefetch: fix pipe ack generation in tagmem - Sebastien Bourdeauducq | 20:51 |
| GitHub167 | [milkymist/master] TMU: testbench: display mask on bus writes - Sebastien Bourdeauducq | 20:51 |
| GitHub47 | [milkymist] sbourdeauducq pushed 1 new commit to hires: https://github.com/milkymist/milkymist/commit/af1f9318b0f7078024d4687a04ceb2d91c6658cf | 20:59 |
| GitHub47 | [milkymist/hires] Merge branch 'master' into hires - Sebastien Bourdeauducq | 20:59 |
| GitHub106 | [linux-milkymist] mwalle pushed 3 new commits to master: https://github.com/milkymist/linux-milkymist/compare/989f405...9382ce7 | 21:51 |
| GitHub106 | [linux-milkymist/master] lm32: remove debug output in milkymistfb - Michael Walle | 21:51 |
| GitHub106 | [linux-milkymist/master] lm32: refactor lm32 architecture - Michael Walle | 21:51 |
| GitHub106 | [linux-milkymist/master] lm32: simplify architecture setup - Michael Walle | 21:51 |
| mwalle | larsc: i'm not sure if the memory initialization is correct, see arm/uc32_bootmem_{init,free} for a pretty generic one | 22:05 |
| GitHub3 | [linux-milkymist] mwalle pushed 1 new commit to master: https://github.com/milkymist/linux-milkymist/commit/fa90900f345610929ae415ea5e0a5bdb01743845 | 22:22 |
| GitHub3 | [linux-milkymist/master] lm32: make milkymist gpio driver OF compatible - Michael Walle | 22:22 |
| --- Wed Jul 27 2011 | 00:00 | |
Generated by irclog2html.py 2.9.2 by Marius Gedminas - find it at mg.pov.lt!