| kristianpaul | pip :) | 00:13 |
|---|---|---|
| kristianpaul | what??. you thread Fallenou was hijacked ::( | 00:19 |
| kristianpaul | ok,lest compile bsp.. | 00:19 |
| Fallenou | kristianpaul: yes please try again | 00:29 |
| Fallenou | it might be better now | 00:29 |
| kristianpaul | Fallenou: ttcp still gave me some fifo overflow.. | 02:15 |
| kristianpaul | wpwrak: a ttcp test is suposed to take how long? | 02:15 |
| wpwrak | kristianpaul: that depends on how fast your link is and how much data you send ;-) | 02:17 |
| kristianpaul | hmm i missed the -n and -l.. | 02:19 |
| kristianpaul | ha ttcp is starting to make sense ! | 02:26 |
| kristianpaul | 1 OK | 02:26 |
| kristianpaul | 10 OK | 02:27 |
| kristianpaul | 100 .. | 02:27 |
| kristianpaul | Minimac RX FIFO overflow! | 02:28 |
| kristianpaul | but test passed | 02:29 |
| kristianpaul | oh weird, if i test again seems it freezed. | 02:31 |
| kristianpaul | after reset and test again with 100 (buf) all went okay.. | 02:32 |
| kristianpaul | arggg, pesky bug ! | 02:33 |
| kristianpaul | 3000, and i still waiting... | 02:49 |
| kmj | hey | 03:14 |
| kmj | Anyone know video specs for 320x240? I managed to find some CGA specs that listed front/back porches, and so on -- but not a pixel clock speed. I'm looking at stuff on my LA, and the specs don't appear to match. I'm thinking around 6mhz or so. | 03:16 |
| kristianpaul | hm? | 03:20 |
| kmj | This is an Amiga 500, 15.7khz horizontal refresh. I measured 63.56us between sync pulses, active video for 52.81us. | 03:21 |
| kmj | I divide the active video by around 320-375 or so pixels, and I'm getting 140-160ns period... and there's an available clock into the video chip of 7.15909mhz | 03:23 |
| kmj | but this active video of 52.81us doesn't match http://www.student.nada.kth.se/~d94-tan/pckort/videofrq.txt which claims it at 44.4 | 03:24 |
| wpwrak | kmj: this may help: http://electronics.stackexchange.com/questions/4172/how-can-i-control-a-cga-screen-with-an-arduino | 03:24 |
| wpwrak | (2nd hit for "cga timing" ;-) | 03:25 |
| kmj | I obviously did 2389423948 web searches first :) | 03:26 |
| wpwrak | yet you didn't find the one that agrees with your observation ? ;-) | 03:27 |
| kmj | :) | 03:27 |
| kmj | im reading ni.com link now :) | 03:27 |
| kmj | most of the links, however, still talk about 640x400 | 03:28 |
| kmj | or x480 | 03:28 |
| wpwrak | hmm yes. the link i mentioned says it's jut NTSC timing at 320x200. | 03:31 |
| kmj | Which is defined where? | 03:33 |
| kmj | i can guess that the pixel clock is half of the 640 rate (so 6.075mhz instead of 12.15mhz) | 03:34 |
| kmj | just about every reference I can find starts their "tables" with 640x480 | 03:35 |
| kmj | or so | 03:35 |
| kmj | http://www.ntsc-tv.com/ntsc-index-02.htm | 03:50 |
| kmj | looks pretty good | 03:50 |
| kmj | yeah NTSC matches what I'm seeing pretty clearly. Thanks. | 04:00 |
| kmj | i can divide active video by pixels to get pixel clock speed | 04:00 |
| kmj | I just don't know if the active video portion would be more than just 320 pixels | 04:01 |
| Fallenou | hi :) | 10:02 |
| Fallenou | kristianpaul: so you did git pull before compiling right ? | 10:03 |
| Fallenou | would you say it is better now? less crashing ? or the same | 10:03 |
| Fallenou | or you can't say because it's totally random :p | 10:03 |
| Fallenou | I am reading your e-mail | 10:07 |
| Fallenou | ok thanks for all the logs and tests I will have a look after the work :) | 10:10 |
| adamw_ | roh, have u filled my phone number in tracking #? | 10:18 |
| kristianpaul | Fallenou: yeah i pull | 10:41 |
| kristianpaul | Fallenou: bette now, dont know, i dont get trought ftpd test (wich is the most important test for me) | 10:41 |
| Fallenou | ok ! | 10:41 |
| Fallenou | thanks for testing anyway :) | 10:41 |
| Fallenou | I will have a look definitely | 10:42 |
| Fallenou | I am just very busy those days | 10:42 |
| kristianpaul | I can support the bug if it get better, as i just dont carsh the board !!! and start sending arp broadcast with no reason | 10:42 |
| Fallenou | assignments to turn late to school + internship + just found accomodation in London | 10:42 |
| kristianpaul | Just tell me where to look i will | 10:42 |
| Fallenou | + talk to prepare for milkymist at the Open source hardware user group in london | 10:42 |
| kristianpaul | I just dint read all the extensive documenation about BSP porting or networking | 10:43 |
| kristianpaul | so i dont know where to start, more that just from scratch | 10:43 |
| Fallenou | you can have a look at the network driver since it is where the bug should be | 10:43 |
| kristianpaul | wich will be slow on my side.. | 10:43 |
| kristianpaul | but wich part? wich function? | 10:43 |
| Fallenou | the network driver is a very basic one | 10:43 |
| Fallenou | it's kind of small | 10:43 |
| Fallenou | but if you don't feel like looking at it (I understand) I will no problem :) | 10:44 |
| kristianpaul | What you really think is failing there, you wrote the code, you know what could probably was writtena and could generate a bug like this | 10:44 |
| Fallenou | yes sure | 10:44 |
| kristianpaul | ok i will look | 10:44 |
| Fallenou | it's in c/src/lib/libbsp/lm32/shared/milkymist_network/network.c | 10:44 |
| kristianpaul | just look.. i will some days | 10:44 |
| kristianpaul | yes sure | 10:44 |
| Fallenou | or something like that :) | 10:44 |
| kristianpaul | i'm aware.. | 10:44 |
| kristianpaul | c/src/lib/libbsp/lm32/shared/milkymist_networking/network.c | 10:46 |
| Fallenou | yes | 10:46 |
| kristianpaul | i must work, read you later | 11:05 |
| Fallenou | bye | 11:05 |
| Action: kristianpaul grabed a printed copy of the net driver with him | 11:05 | |
| Fallenou | ohoh :) | 11:05 |
| Fallenou | have fun | 11:05 |
| Fallenou | lekernel: it seems milkymist wiki is down | 11:34 |
| lekernel | dreamhost db problem it seems | 11:38 |
| Fallenou | ok it's back now | 11:41 |
| Fallenou | thanks :) | 11:41 |
| Fallenou | kristianpaul: about your change in the "flickernoise build instructions" wiki page , adding ';' makes my configure and make fail | 11:48 |
| Fallenou | I am removing the ';' from the wiki, it works well without them, and fail with them | 11:48 |
| Fallenou | lekernel: woow the flickernoise dependency list has grown crazy | 11:54 |
| Fallenou | it's now really long to build flickernoise | 11:54 |
| Fallenou | you have to get numerous libraries and compile them :o | 11:55 |
| lekernel | well, compare that to LFS :) | 11:55 |
| Fallenou | hehe | 11:55 |
| Fallenou | well it would be great to have some automated compile tool | 11:55 |
| Fallenou | a small script or something | 11:55 |
| lekernel | or just rpm packages with the pre-compiled libs for lm32 | 11:55 |
| Fallenou | doing all of this by hand is annoying | 11:55 |
| Fallenou | yes | 11:55 |
| lekernel | yeah, feel free :) | 11:56 |
| Action: Fallenou 's todo list is close to overflow | 11:56 | |
| kristianpaul | Fallenou: hmm | 14:31 |
| kristianpaul | Fallenou: ahh.. (;) | 14:32 |
| kristianpaul | Fallenou: are yoi copying and pasting from wiki? | 14:32 |
| kristianpaul | s/yoi/you | 14:32 |
| kristianpaul | comma.. | 14:33 |
| kristianpaul | i tought i worked, sorry | 14:33 |
| kristianpaul | Fallenou: letme know if you got mupdf to compile. i still dont :/ and dint check further as the rest went ok | 14:33 |
| kristianpaul | Fallenou: annoying indeed :) | 14:34 |
| kristianpaul | Fallenou: how it fail? | 14:34 |
| kristianpaul | but at theend it uses the lm32-gcc right? | 14:34 |
| Fallenou | well removing the ';' just made it work | 14:40 |
| Fallenou | don't have too much time to talk now | 14:40 |
| Fallenou | am at work | 14:40 |
| kristianpaul | me too ;-) | 14:41 |
| kristianpaul | Fallenou: do you already removed the ; ? | 14:48 |
| kristianpaul | also i just copy and paste and it works.. | 14:48 |
| kristianpaul | but is okay better remove comma | 14:48 |
| kristianpaul | btw i added comma because i was using gcc instead of lm32-rtems4.11-gcc | 14:49 |
| kristianpaul | i'll compile flickernoise again anyway, as i seem my las bsp build broke some things.. | 14:50 |
| kristianpaul | argg, configure: error: C compiler cannot create executables | 14:55 |
| Action: kristianpaul hates /usr/bin/mmqemu.sh | 14:59 | |
| Action: kristianpaul realize a problem with backslashes | 15:03 | |
| Action: kristianpaul got stuck with freetype :/ | 15:24 | |
| Fallenou | kristianpaul: which shell are you using ? and linux distribution ? | 15:55 |
| Fallenou | I am using stock ubuntu 10.10 | 15:55 |
| Fallenou | in virtualbox | 15:55 |
| nats` | < kristianpaul> argg, configure: error: C compiler cannot create executables <= sometimes it's corrected by a apt-get install build-essential :D | 16:12 |
| kristianpaul | nats`: ah?? | 17:34 |
| kristianpaul | Fallenou: debian stable squeeze | 17:35 |
| kristianpaul | not virtualbox | 17:35 |
| kristianpaul | nats`: i alredy setup my build enviorment, so thats not the case, actually i was solved by removing some backslashes | 17:36 |
| Fallenou | kristianpaul: never tried on debian :o | 17:36 |
| Fallenou | oh yes i always type everything on the same line | 17:36 |
| Fallenou | no backslash | 17:36 |
| kristianpaul | Fallenou: http://milkymist.org/wiki/index.php?title=Building_the_RTEMS_toolset_on_Debian | 17:37 |
| kristianpaul | Fallenou: did you managed to compile flicernoise? | 17:37 |
| Fallenou | not yet | 17:38 |
| kristianpaul | I must doing something wrong, las time freetype dint give me troubles.. | 17:38 |
| kristianpaul | lasT | 17:38 |
| Fallenou | I didn't compile freetype yet | 17:38 |
| Fallenou | a lot of dependencies :) will finish after the work | 17:38 |
| Fallenou | btw OSHUG has just been announced | 17:40 |
| Fallenou | http://oshug.org/event/8 | 17:41 |
| kristianpaul | Fallenou: http://paste.debian.net/107726/ | 17:44 |
| kristianpaul | Are you living in the uk? | 17:45 |
| --- Wed Feb 16 2011 | 00:00 | |
Generated by irclog2html.py 2.9.2 by Marius Gedminas - find it at mg.pov.lt!