#milkymist IRC log for Thursday, 2011-01-20

adamw_roh, we have another passed ethernet connector while producing m1 rc1 http://downloads.qi-hardware.com/hardware/milkymist_one/datasheet/Ethernet/RTF-114B8A1A(023-00).pdf00:50
adamw_when you have time, would you please check if its outlet dimension is still matched your case design?00:52
adamw_i was thought and compared both two connectors, so hope the tolerance from your design can meet it.00:54
rohi have tested it with an rc2 and rc1 and both fit01:02
adamw_the 'RTF-114B8A1A' part with 'UDE' brand mark on connector itself. Not sure your rc1 is the 'UDE' part.01:11
adamw_So please check if it's not. tks!01:12
wolfsprauladamw_: on rc3, we should make the dc-10 jack tighter/less tolerance01:24
adamw_while producing 6pcs in rc1, i have three ethernet connector with 'UDE' part, the other three with Molex http://www.molex.com/pdm_docs/sd/480250002_sd.pdf01:24
adamw_wolfspraul, yes, i put them into our known issue items, http://en.qi-hardware.com/wiki/Milkymist_One_RC2_Known_Issues01:26
wolfspraulgreat, thx01:26
adamw_so while routing, surely I'll check that DC jack. :)01:26
larscmoin moin :)13:58
mumptaidahh, ein hamburger ;)14:00
Action: mumptai sits in bremen 14:02
larscah, nice. do you have a milkymist board?14:03
mumptaii have a unused nexys2, but i doubt that i could port milkymist to it14:07
rohbit too small i guess (s3e)14:42
mumptairoh, and a small memory i/f15:03
kristianpaulmumptai: you can16:59
kristianpaulor try16:59
kristianpaulcheck the avnet port in github16:59
kristianpaulor just syhtetize with lm32 + gpio + uart + sram (check old commits or avport)17:00
mumptaithe minimal soc should work, but the image-processing pipeline might not fit17:01
kristianpauloh, sure will not ;-)17:03
mumptaiand if it fits in the fpga, the sram via the async i/f might be a bit too slow (16bit, about 75ns)17:05
kristianpaul(BYU RapidSmith Project) how do you find ths project?20:23
kristianpaulah, lekernel, i hope you read logs :-)20:23
--- Fri Jan 21 201100:00

Generated by irclog2html.py 2.9.2 by Marius Gedminas - find it at mg.pov.lt!