qi-bot | [commit] Stefan Schmidt: atusb: fw: make sure we return correctly for both atusb as well as rzusb (stefan/rzusb) http://qi-hw.com/p/ben-wpan/9d043dc | 21:26 |
---|
qi-bot | [commit] Stefan Schmidt: flashi/spi: Use tabs instead of spaces. (master) http://qi-hw.com/p/ben-wpan/15b15b9 | 21:33 |
---|---|---|
qi-bot | [commit] Stefan Schmidt: atusb-eui64: add utility to read/write and EUI64 from/to the device EEPROM (master) http://qi-hw.com/p/ben-wpan/55de8c6 | 21:33 |
qi-bot | [commit] Stefan Schmidt: atusb/fw: add EUI64 read and write fw interface to permanently set an EUI64 (master) http://qi-hw.com/p/ben-wpan/583a7b7 | 21:33 |
qi-bot | [commit] Stefan Schmidt: atusb/fw: Bump version to 0.3 after adding EUI64 read/write handling (master) http://qi-hw.com/p/ben-wpan/fde38d5 | 21:33 |
qi-bot | [commit] Werner Almesberger: modules/inductor-2p.fpd (INDUCTOR-2P-6mmx6mm): add 6 x 6 mm inductor (master) http://qi-hw.com/p/kicad-libs/c9e1946 | 23:52 |
---|---|---|
qi-bot | [commit] Werner Almesberger: modules/memcard8-jae-st1w008s4b.fpd: JAE ST1W008S4B memory card holder (master) http://qi-hw.com/p/kicad-libs/23838b3 | 23:52 |
qi-bot | [commit] Werner Almesberger: modules/DESCR (8:10-SOCKET-RA-PUSH-PULL): this is Amphenol 114-00841-68 (master) http://qi-hw.com/p/kicad-libs/5590702 | 23:52 |
qi-bot | [commit] Werner Almesberger: modules/memcard8-hirose-dm3cs.fpd: Hirose DM3CS memory card holder (master) http://qi-hw.com/p/kicad-libs/34a20f9 | 23:52 |
qi-bot | [commit] Werner Almesberger: dsv/dsv (flush): sanitize name of local data sheet copy (master) http://qi-hw.com/p/eda-tools/006940d | 01:46 |
---|---|---|
kyak | for example, it can be set so that the [commit] messages from qi-bot are not ignored, but simply don't mark the channel as "Act:" | 10:16 |
qi-bot | [commit] Werner Almesberger: components/components.pro (2450bm14e0003): correct LibName clash with nrf51822 (master) http://qi-hw.com/p/kicad-libs/254fd63 | 07:41 |
---|---|---|
qi-bot | [commit] Werner Almesberger: components/por.lib (POR-809): power-on-reset generator (master) http://qi-hw.com/p/kicad-libs/a73b1f3 | 07:41 |
qi-bot | [commit] Werner Almesberger: components/2450bm14e0003.lib: Johanson 2450BM14E0003 (master) http://qi-hw.com/p/kicad-libs/7239b58 | 14:07 |
---|---|---|
qi-bot | [commit] Werner Almesberger: modules/0805-6.fpd: add 0603-6, remove unused parameters "a" and "c" (master) http://qi-hw.com/p/kicad-libs/d276d71 | 14:07 |
qi-bot | [commit] Werner Almesberger: modules/qfn.fpd, HIERARCHY: add QFN48-nRF51 (0.4 mm pitch !) (master) http://qi-hw.com/p/kicad-libs/f347b29 | 14:07 |
qi-bot | [commit] Werner Almesberger: components/nrf51822.lib: Nordic nRF51822 (master) http://qi-hw.com/p/kicad-libs/5657b74 | 05:31 |
---|
qi-bot | [commit] Werner Almesberger: components/tvs8.lib: 8 x diode TVS (master) http://qi-hw.com/p/kicad-libs/2b82724 | 16:02 |
---|---|---|
qi-bot | [commit] Werner Almesberger: xxx (master) http://qi-hw.com/p/kicad-libs/370243c | 16:02 |
qi-bot | [commit] Werner Almesberger: components/README: add HIERARCHY step (master) http://qi-hw.com/p/kicad-libs/e720f09 | 16:02 |
qi-bot | [commit] Werner Almesberger: modules/dfn.fpd: add DFN-8-0.4mm (master) http://qi-hw.com/p/kicad-libs/b8cf942 | 16:02 |
qi-bot | [commit] Bas Wijnen: enable tp4+5 uart; don't enable uart receive on keyboard pin (master) http://qi-hw.com/p/iris/6fe8e31 | 07:09 |
---|
qi-bot | [commit] Bas Wijnen: add architecture description (master) http://qi-hw.com/p/iris/c705511 | 05:17 |
---|
qi-bot | [commit] Bas Wijnen: make things work again (master) http://qi-hw.com/p/iris/10ea4a0 | 06:07 |
---|
qi-bot | [commit] Werner Almesberger: sl2/slicer.pl: use same Z offset calculation as slicer.py (master) http://qi-hw.com/p/cae-tools/66adb05 | 21:42 |
---|---|---|
qi-bot | [commit] Werner Almesberger: cameo/templates/mkmk-simple: introduce Z0 parameter; clean up Z calculation (master) http://qi-hw.com/p/cae-tools/48c5cd0 | 21:42 |
qi-bot | [commit] Werner Almesberger: cameo/path.c (path_from), path.h: make public, for future sharing (master) http://qi-hw.com/p/cae-tools/445d8f7 | 15:50 |
---|---|---|
qi-bot | [commit] Werner Almesberger: cameo/: new command "purge" to remove corners that add little or on area (master) http://qi-hw.com/p/cae-tools/346899c | 15:50 |
qi-bot | [commit] Werner Almesberger: sfc/slicer.py: print Z position of layer being processes (master) http://qi-hw.com/p/cae-tools/5c6a810 | 15:50 |
qi-bot | [commit] Werner Almesberger: sl2/: standalone slicer (WIP) (master) http://qi-hw.com/p/cae-tools/6800f02 | 15:50 |
qi-bot | [commit] Werner Almesberger: sl2/slicer.pl: complete basic processing structure (WIP) (master) http://qi-hw.com/p/cae-tools/73c3a77 | 15:50 |
qi-bot | [commit] Werner Almesberger: sl2/slicer.pl: add command-line options (master) http://qi-hw.com/p/cae-tools/8af4f45 | 15:50 |
qi-bot | [commit] Werner Almesberger: modules/tact-4-rect-smt.fpd: rectangular SMT tactile switch (master) http://qi-hw.com/p/kicad-libs/5e493d8 | 14:18 |
---|---|---|
qi-bot | [commit] Werner Almesberger: modules/DESCR: add description for TL3315 and EVQPQ (master) http://qi-hw.com/p/kicad-libs/74bd241 | 14:26 |
qi-bot | [commit] Werner Almesberger: gp2rml/gp2rml.c (output_paths): use PA when possible; correct speed calculation (master) http://qi-hw.com/p/cae-tools/4153e6b | 23:18 |
---|
qi-bot | [commit] Bas Wijnen: Make it work with new gcc version; use linker script to force entry code in page 0. (master) http://qi-hw.com/p/iris/2d803d5 | 05:48 |
---|
qi-bot | [commit] Werner Almesberger: atusb/fw/flash.c (flash_ops): fix placement of "const" (master) http://qi-hw.com/p/ben-wpan/37a4f00 | 12:43 |
---|
qi-bot | [commit] Werner Almesberger: modules/df40.fpd: Hirose DF40 series (unshielded, C and HC variants) (master) http://qi-hw.com/p/kicad-libs/4247b77 | 05:34 |
---|---|---|
qi-bot | [commit] Werner Almesberger: componens/aat4282.lib: Skyworks AAT4282 dual load switch (master) http://qi-hw.com/p/kicad-libs/ffe4f32 | 06:08 |
qi-bot | [commit] Werner Almesberger: modules/rev-led.fpd: reverse-mounted LEDs (just 1206 for now) (master) http://qi-hw.com/p/kicad-libs/ab61cf9 | 07:15 |
qi-bot | [commit] Werner Almesberger: lib/tlv61220.lib: add TI TLV61220 step-up converter (master) http://qi-hw.com/p/kicad-libs/8b46ac0 | 09:21 |
qi-bot | [commit] Werner Almesberger: fw/atusb/ (dfu_flash_ops): make const (master) http://qi-hw.com/p/ben-wpan/4283900 | 03:59 |
---|---|---|
qi-bot | [commit] Werner Almesberger: atusb/fw/usb/usb.c (handle_setup): skip non-interface descriptors when processing SET_INTERFACE (master) http://qi-hw.com/p/ben-wpan/f89ce52 | 03:59 |
qi-bot | [commit] Werner Almesberger: Merge branch 'master' of projects.qi-hardware.com:ben-wpan (master) http://qi-hw.com/p/ben-wpan/9e9f659 | 03:59 |
qi-bot | [commit] Werner Almesberger: sfc/slicer.py: correct last position tracking for mech_eps (master) http://qi-hw.com/p/cae-tools/d72d649 | 14:33 |
---|---|---|
qi-bot | [commit] Werner Almesberger: Makefile.kicad: copy over from ben-wpan/makefiles/ (master) http://qi-hw.com/p/eda-tools/fdabcc9 | 15:30 |
qi-bot | [commit] Werner Almesberger: kicad-patches/README: add KiCAD build dependencies as prerequisite (master) http://qi-hw.com/p/eda-tools/e291c43 | 15:30 |
qi-bot | [commit] Werner Almesberger: modules/pogo.fpd, HIERARCHY: add -SILK variants (with silk screen circle) (master) http://qi-hw.com/p/kicad-libs/e589e56 | 15:40 |
qi-bot | [commit] Werner Almesberger: modules/0805-6.fpd: copy over from ben-wpan (master) http://qi-hw.com/p/kicad-libs/a23a6ea | 15:40 |
qi-bot | [commit] Stefan Schmidt: web: Correct fw path for atusb release and make rsync verbose (master) http://qi-hw.com/p/ben-wpan/a0e3ad3 | 07:49 |
---|---|---|
qi-bot | [commit] Werner Almesberger: sfc/slicer.py: new option -m for model tolerance; correct usage (master) http://qi-hw.com/p/cae-tools/ecaffbb | 14:29 |
qi-bot | [commit] Werner Almesberger: gp2rml/gp2rml.c (main): use getopt (master) http://qi-hw.com/p/cae-tools/ea11b88 | 14:29 |
qi-bot | [commit] Werner Almesberger: gp2rml/gp2rml.c: add spaces around operators (master) http://qi-hw.com/p/cae-tools/efe5f38 | 14:29 |
qi-bot | [commit] Werner Almesberger: gp2rml/gp2rml.c: new option "-t top" to manually set z_max (master) http://qi-hw.com/p/cae-tools/d3bccb6 | 14:29 |
qi-bot | [commit] Stefan Schmidt: Revert "atusb/fw/usb/: enable MCU reset on USB bus reset after config selection" (master) http://qi-hw.com/p/ben-wpan/464ab40 | 13:04 |
---|---|---|
qi-bot | [commit] Stefan Schmidt: atusb/fw: Use RX_AACK_ON instead of RX_ON in the firmware. (master) http://qi-hw.com/p/ben-wpan/fc7551e | 13:04 |
qi-bot | [commit] Stefan Schmidt: atusb/fw: Add build system support for adding a DFU suffix to the fw file (master) http://qi-hw.com/p/ben-wpan/3ebd17f | 13:04 |
qi-bot | [commit] Stefan Schmidt: atusb/fw: Bump minor version to mark first public release. (master) http://qi-hw.com/p/ben-wpan/809a093 | 13:04 |
qi-bot | [commit] Stefan Schmidt: web: Update links to linux-wpan project, driver and general status (master) http://qi-hw.com/p/ben-wpan/c6a87b4 | 13:42 |
qi-bot | [commit] Stefan Schmidt: web: Add first atusb firmware release to website. (master) http://qi-hw.com/p/ben-wpan/d2a0bfa | 13:42 |
qi-bot | [commit] Nebuleon Fumika: Remove all touch-screen-related code (master) http://qi-hw.com/p/gmenu2x/2a2634b | 19:24 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: Removed the "Rename section" option (master) http://qi-hw.com/p/gmenu2x/ef6d378 | 19:24 |
qi-bot | [commit] Maarten ter Huurne: Quit GMenu2X when window is closed in main screen (master) http://qi-hw.com/p/gmenu2x/cb1b26e | 19:24 |
qi-bot | [commit] Maarten ter Huurne: Suppress Clang analyzer warnings about dead assignments (master) http://qi-hw.com/p/gmenu2x/7b10f94 | 19:24 |
qi-bot | [commit] Maarten ter Huurne: Removed unused methods in LinkApp class (master) http://qi-hw.com/p/gmenu2x/90a8d90 | 19:24 |
qi-bot | [commit] Maarten ter Huurne: Fixed formatting string type mismatches (master) http://qi-hw.com/p/gmenu2x/9394a95 | 19:24 |
qi-bot | [commit] Maarten ter Huurne: Removed unused MMSP2ADC struct definition (master) http://qi-hw.com/p/gmenu2x/519387e | 19:24 |
qi-bot | [commit] Maarten ter Huurne: Gave Layer class a protected constructor (master) http://qi-hw.com/p/gmenu2x/00d3c3b | 19:24 |
qi-bot | [commit] Maarten ter Huurne: Cleaned up code that loads a manual from an OPK file (master) http://qi-hw.com/p/gmenu2x/510d673 | 19:24 |
qi-bot | [commit] Maarten ter Huurne: Declare "dirp" and "dptr" pointers just before they're needed (master) http://qi-hw.com/p/gmenu2x/4159e69 | 19:24 |
qi-bot | [commit] Maarten ter Huurne: Set a window title (master) http://qi-hw.com/p/gmenu2x/aeb9b0b | 19:24 |
qi-bot | [commit] Maarten ter Huurne: Removed "gp2x.h" header (master) http://qi-hw.com/p/gmenu2x/aeb9c12 | 19:24 |
qi-bot | [commit] Maarten ter Huurne: Only allow empty sections to be deleted (master) http://qi-hw.com/p/gmenu2x/c2759f1 | 19:24 |
qi-bot | [commit] Maarten ter Huurne: Moved section directory delete code to Menu class (master) http://qi-hw.com/p/gmenu2x/f17fae7 | 19:24 |
qi-bot | [commit] Maarten ter Huurne: Add "/compile" to .gitignore (master) http://qi-hw.com/p/gmenu2x/10429af | 19:24 |
qi-bot | [commit] Maarten ter Huurne: Changed LinkApp::renameFile() to setFile() (master) http://qi-hw.com/p/gmenu2x/49bbf3a | 19:24 |
qi-bot | [commit] Maarten ter Huurne: Make sure inserting a new section doesn't change the selected section (master) http://qi-hw.com/p/gmenu2x/b6fcf0f | 19:24 |
qi-bot | [commit] Maarten ter Huurne: Fix bug in section directory creation method (master) http://qi-hw.com/p/gmenu2x/73ceffa | 19:24 |
qi-bot | [commit] Maarten ter Huurne: Put code for moving links to a different section into Menu class (master) http://qi-hw.com/p/gmenu2x/8e76dff | 19:24 |
qi-bot | [commit] Maarten ter Huurne: Put code to construct unique path into new utlity function uniquePath() (master) http://qi-hw.com/p/gmenu2x/1b54483 | 19:24 |
qi-bot | [commit] Maarten ter Huurne: Updated SDL configure check (master) http://qi-hw.com/p/gmenu2x/6418ff0 | 18:00 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: Fixed compile when ENABLE_CPUFREQ is defined (master) http://qi-hw.com/p/gmenu2x/0d26a2a | 18:00 |
qi-bot | [commit] Maarten ter Huurne: Deduplicate default platform definition (master) http://qi-hw.com/p/gmenu2x/bb7775a | 18:00 |
qi-bot | [commit] Maarten ter Huurne: Disable cpufreq feature on PC (master) http://qi-hw.com/p/gmenu2x/b138b87 | 18:00 |
qi-bot | [commit] Maarten ter Huurne: If font fails to open, log path tried (master) http://qi-hw.com/p/gmenu2x/9cfbc56 | 18:00 |
qi-bot | [commit] Maarten ter Huurne: Don't crash if battery icon is not found (master) http://qi-hw.com/p/gmenu2x/05a58e8 | 18:00 |
qi-bot | [commit] Maarten ter Huurne: Pass GMenu2X instance by reference instead of pointer (master) http://qi-hw.com/p/gmenu2x/11ca830 | 18:00 |
qi-bot | [commit] Maarten ter Huurne: Remove declaration of unimplemented method (master) http://qi-hw.com/p/gmenu2x/1a5da1f | 18:00 |
qi-bot | [commit] Maarten ter Huurne: Avoid crash on startup when no applications are found (master) http://qi-hw.com/p/gmenu2x/3db955c | 18:00 |
qi-bot | [commit] Maarten ter Huurne: Look for data relative to prefix set by configure (master) http://qi-hw.com/p/gmenu2x/9ac3351 | 18:00 |
qi-bot | [commit] Maarten ter Huurne: Create section directory just before writing files to it (master) http://qi-hw.com/p/gmenu2x/08ecd7d | 18:00 |
qi-bot | [commit] Maarten ter Huurne: Create sections for built-in action links if necessary (master) http://qi-hw.com/p/gmenu2x/fad68bf | 18:00 |
qi-bot | [commit] Maarten ter Huurne: Keep list of section names sorted at all times (master) http://qi-hw.com/p/gmenu2x/9ca019e | 18:00 |
qi-bot | [commit] Werner Almesberger: atusb/fw/usb/usb.h: add endpoint types (master) http://qi-hw.com/p/ben-wpan/f7e684b | 23:19 |
---|---|---|
qi-bot | [commit] Werner Almesberger: atusb/fw/usb/usb.c (handle_setup): also pass interface-level GET_DESCRIPTOR to get_descriptor (master) http://qi-hw.com/p/ben-wpan/4b6f390 | 23:19 |
qi-bot | [commit] Werner Almesberger: atusb/fw/usb/: fix incorrect code point for USB_CLASS_PER_INTERFACE (master) http://qi-hw.com/p/ben-wpan/88e2bde | 17:54 |
---|---|---|
qi-bot | [commit] Werner Almesberger: atusb/fw/usb/usb.h: add a few common class codes (master) http://qi-hw.com/p/ben-wpan/a6c639b | 17:54 |
qi-bot | [commit] Werner Almesberger: cameo/: new command write_gerber, for Gerber output (master) http://qi-hw.com/p/cae-tools/c7ff028 | 00:14 |
---|---|---|
qi-bot | [commit] Werner Almesberger: cameo/lang.l: require all commands followed by file name to end with whitespace (master) http://qi-hw.com/p/cae-tools/096b91e | 00:14 |
qi-bot | [commit] Werner Almesberger: cameo/templates/mkmk-simple: accept no only Gerber but also $NAME.gp as input (master) http://qi-hw.com/p/cae-tools/1f04d64 | 03:00 |
---|---|---|
qi-bot | [commit] Werner Almesberger: cameo/path.c (path_find_leftmost): continue searching for the smallest coordinate (master) http://qi-hw.com/p/cae-tools/dddb035 | 03:00 |
qi-bot | [commit] Werner Almesberger: sfc/slicer.py: also let getopt know that we support -o (master) http://qi-hw.com/p/cae-tools/a20499b | 05:50 |
---|---|---|
qi-bot | [commit] Werner Almesberger: sfc/slicer.py: add overshoot only after slicing (master) http://qi-hw.com/p/cae-tools/dc79b03 | 05:50 |
qi-bot | [commit] Werner Almesberger: sfc/slicer.py: when height is used as coordinate, correct it for the Z offset (master) http://qi-hw.com/p/cae-tools/8488944 | 05:49 |
---|---|---|
qi-bot | [commit] Werner Almesberger: sfc/slicer.py: new option -o to add an offset to the last layer (master) http://qi-hw.com/p/cae-tools/4d084a6 | 05:49 |
qi-bot | [commit] Werner Almesberger: sfc/slicer.py: when flipping, also flip Z positions used for selecting levels (master) http://qi-hw.com/p/cae-tools/4cc43e1 | 06:21 |
---|
qi-bot | [commit] Werner Almesberger: poly2d/: change license from GPLv2+ to LGPLv2.1+ (master) http://qi-hw.com/p/cae-tools/149fc26 | 06:33 |
---|---|---|
qi-bot | [commit] Werner Almesberger: test/bugs: add regression tests for p2d_no_intersect and angle_3 bugs (master) http://qi-hw.com/p/cae-tools/ae8d393 | 06:33 |
qi-bot | [commit] Werner Almesberger: sfc/slicer.py: FreeCAD-based slicer, first commit (master) http://qi-hw.com/p/cae-tools/79a8210 | 06:33 |
qi-bot | [commit] Werner Almesberger: sfc/slicer.py: cleanup and debugging; add various alignment and transformation options (master) http://qi-hw.com/p/cae-tools/ecb7667 | 06:33 |
qi-bot | [commit] Werner Almesberger: poly2d/p2d_attrib.c (angle_3): prevent acos() domain errors (master) http://qi-hw.com/p/cae-tools/155cfa3 | 06:33 |
qi-bot | [commit] Werner Almesberger: poly2d/p2d_attrib.c (p2d_is_cw): check that the angle isn't NaN (master) http://qi-hw.com/p/cae-tools/385bd60 | 06:33 |
qi-bot | [commit] Werner Almesberger: sfc/slicer.py: fix generation of intermediate layers (master) http://qi-hw.com/p/cae-tools/ed0129d | 06:33 |
qi-bot | [commit] Werner Almesberger: slicer/slicer.c: rewrite - we now consider all non-horizontal facets (master) http://qi-hw.com/p/cae-tools/005dcc3 | 23:30 |
---|---|---|
qi-bot | [commit] Werner Almesberger: cameo/area-poly2d.c (area): fail if any paths are open (master) http://qi-hw.com/p/cae-tools/4d15951 | 23:30 |
qi-bot | [commit] Werner Almesberger: cameo/poly2d.c (paths_to_polys_z): correctly ignore empty paths (master) http://qi-hw.com/p/cae-tools/c9c0e88 | 23:30 |
qi-bot | [commit] Werner Almesberger: cameo/path.c (path_connect, et al.): move to new file connect.c (master) http://qi-hw.com/p/cae-tools/f94fb2f | 23:30 |
qi-bot | [commit] Werner Almesberger: poly2d/p2d_attrib.c (p2d_no_intersect): don't test last vs. first segment (master) http://qi-hw.com/p/cae-tools/84f9d3c | 23:30 |
qi-bot | [commit] Werner Almesberger: poly2d/p2d_area_holes.cpp (recurse_area): correct confusing indentation (master) http://qi-hw.com/p/cae-tools/6084b52 | 23:30 |
qi-bot | [commit] Werner Almesberger: poly2d/p2d_attrib.c (angle_3): put spaces around operators (master) http://qi-hw.com/p/cae-tools/de7df0b | 23:30 |
qi-bot | [commit] Werner Almesberger: poly2d/p2d_attrib.c: correct line wrap in title comment (how did this get there ?) (master) http://qi-hw.com/p/cae-tools/05d3d50 | 23:30 |
qi-bot | [commit] Werner Almesberger: poly2d/p2d_attrib.c (angle_3): don't divide by zero ... (master) http://qi-hw.com/p/cae-tools/7ca942d | 23:30 |
qi-bot | [commit] Werner Almesberger: update the menu bar (specifically, View > Show ...) after changes with "/" (master) http://qi-hw.com/p/fped/e3deb39 | 00:55 |
---|---|---|
qi-bot | [commit] Werner Almesberger: slicer/slice.c (eq): increase epsilon from 1e-6 to 1e-5 (master) http://qi-hw.com/p/cae-tools/02d2b28 | 00:55 |
qi-bot | [commit] Werner Almesberger: poly2d (p2d_is_cw, p2d_is_closed, p2d_no_intersect, p2d_vertices): use better types (master) http://qi-hw.com/p/cae-tools/cba417f | 00:24 |
---|---|---|
qi-bot | [commit] Werner Almesberger: poly2d (p2d_contains_point): use "bool" instead of "int" (master) http://qi-hw.com/p/cae-tools/3cc284d | 00:24 |
qi-bot | [commit] Werner Almesberger: poly2d/ (p2d_write_gnuplot, p2d_write_gnuplot_all): use "bool" instead of "int" (master) http://qi-hw.com/p/cae-tools/5808a40 | 00:24 |
qi-bot | [commit] Werner Almesberger: gui_canvas.c (key_press_event): make / rotate through packages as well (master) http://qi-hw.com/p/fped/5fdea0e | 08:33 |
---|
qi-bot | [commit] Werner Almesberger: sanitize show var/code handling; switch to enum for future changes (master) http://qi-hw.com/p/fped/73389fb | 11:59 |
---|---|---|
qi-bot | [commit] Werner Almesberger: gui.c (change_world): don't change color of the active frame (master) http://qi-hw.com/p/fped/809e814 | 11:59 |
qi-bot | [commit] Werner Almesberger: new sidebar mode "Show packages" (master) http://qi-hw.com/p/fped/5a1fd80 | 11:59 |
qi-bot | [commit] Werner Almesberger: gui_frame.c (loop_scroll_event): reverse direction (master) http://qi-hw.com/p/fped/15e5811 | 11:59 |
qi-bot | [commit] Werner Almesberger: slicer/README: correct style and a typo (master) http://qi-hw.com/p/cae-tools/73c0489 | 12:55 |
---|---|---|
qi-bot | [commit] Werner Almesberger: slicer/stl.c, stl.h: copy over from Neo900 misc/meme/ (master) http://qi-hw.com/p/cae-tools/632a60f | 12:55 |
qi-bot | [commit] Werner Almesberger: slicer/stl.h, stl.c: adapt for use in slicer (master) http://qi-hw.com/p/cae-tools/5f31b94 | 12:55 |
qi-bot | [commit] Werner Almesberger: slicer/slice.h, slice.c, util.h: extract outlines of Z slices from mesh (master) http://qi-hw.com/p/cae-tools/49abc13 | 12:55 |
qi-bot | [commit] Werner Almesberger: slicer/slice.c (add): only output lower end of vertical walls (still needs work) (master) http://qi-hw.com/p/cae-tools/3f2c6cd | 12:55 |
qi-bot | [commit] Werner Almesberger: slicer/stl.c (stl_load_file): support binary STL as well (on little-endian hosts) (master) http://qi-hw.com/p/cae-tools/c82ea10 | 12:55 |
qi-bot | [commit] Werner Almesberger: slicer/slice.c: repeat lower cuts at intermediate points (master) http://qi-hw.com/p/cae-tools/6a12d47 | 12:55 |
qi-bot | [commit] Werner Almesberger: slicer/stl.c: mention where the format is documented (master) http://qi-hw.com/p/cae-tools/c984021 | 12:55 |
qi-bot | [commit] Werner Almesberger: slicer/slice.c (add): detect and report inclined facets (master) http://qi-hw.com/p/cae-tools/a30024d | 12:55 |
qi-bot | [commit] Werner Almesberger: slicer/stl.c (stl_load_binary): remove debug output (master) http://qi-hw.com/p/cae-tools/65fa69c | 12:55 |
qi-bot | [commit] Werner Almesberger: slicer/slice.c, slice.h: optionally draw a box around the object (master) http://qi-hw.com/p/cae-tools/6b7ceca | 12:55 |
qi-bot | [commit] Werner Almesberger: slicer/Makefile, slicer.c: forgot to commit these files :-( (master) http://qi-hw.com/p/cae-tools/aa327c8 | 12:55 |
qi-bot | [commit] Werner Almesberger: slicer/slice.c (dump_layer): don't draw the top end of walls (master) http://qi-hw.com/p/cae-tools/9fc0962 | 12:55 |
qi-bot | [commit] Werner Almesberger: slicer/: new option -z to add intermediate layers (master) http://qi-hw.com/p/cae-tools/b2d6ef5 | 12:55 |
qi-bot | [commit] Werner Almesberger: dump.c: add dumping of %iprint (master) http://qi-hw.com/p/fped/1d7eccb | 23:01 |
---|---|---|
qi-bot | [commit] Werner Almesberger: inst.c (find_point_vec): correct indentation (master) http://qi-hw.com/p/fped/8a1a310 | 23:01 |
qi-bot | [commit] Werner Almesberger: dump.c (order_vecs): don't trip over vectors with deferred resolution (master) http://qi-hw.com/p/fped/ad2c07f | 23:01 |
qi-bot | [commit] Werner Almesberger: sod.fpd (SOD-123): add SOD-123 (~4.5 x 1.7 mm diode) footprint (master) http://qi-hw.com/p/kicad-libs/34bf59d | 01:44 |
---|
qi-bot | [commit] Werner Almesberger: components/memcard8.lib (MEMCARD8-SHIELD3-SW1): add variant with single-contact switch (master) http://qi-hw.com/p/kicad-libs/e6f3991 | 16:13 |
---|---|---|
qi-bot | [commit] Werner Almesberger: modules/memcard8-molex-1050270001.fpd: minimalistic memory card holder (master) http://qi-hw.com/p/kicad-libs/87650f7 | 16:13 |
qi-bot | [commit] Werner Almesberger: components/kl16-32.lib: Kinetis KL16 (master) http://qi-hw.com/p/kicad-libs/e98f0d4 | 21:20 |
qi-bot | [commit] Werner Almesberger: dsv/dsv: to print to stderr, it's 1>&2 and not 2>&1, stupid ... (master) http://qi-hw.com/p/eda-tools/1a8beb2 | 20:36 |
---|
qi-bot | [commit] Werner Almesberger: bin/hi8: highlight 8-bit chars; -g for "grep" mode: show only lines with 8-bit (master) http://qi-hw.com/p/wernermisc/dd90018 | 06:16 |
---|
qi-bot | [commit] Werner Almesberger: atusb/fw/usb/dfu.c (config_descriptor): correct alt settings off-by-one error (master) http://qi-hw.com/p/ben-wpan/b51d442 | 05:07 |
---|
qi-bot | [commit] Maarten ter Huurne: Fixed blanking state set by PowerSaver (master) http://qi-hw.com/p/gmenu2x/51685e4 | 00:23 |
---|
qi-bot | [commit] Maarten ter Huurne: Clean up split() utility function (master) http://qi-hw.com/p/gmenu2x/f0f3684 | 06:58 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: Remove #include in the middle of browsedialog.cpp (master) http://qi-hw.com/p/gmenu2x/7e2bdcc | 06:58 |
qi-bot | [commit] Maarten ter Huurne: Removed unused include (master) http://qi-hw.com/p/gmenu2x/e7248ae | 11:10 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: Fixed code that removes comma at end of extensions list (master) http://qi-hw.com/p/gmenu2x/4997438 | 12:45 |
qi-bot | [commit] Maarten ter Huurne: Rewrote empty line stripping in manual display (master) http://qi-hw.com/p/gmenu2x/a03f895 | 12:45 |
qi-bot | [commit] Maarten ter Huurne: Fix build with musl libc (master) http://qi-hw.com/p/gmenu2x/d27ebab | 04:52 |
---|
qi-bot | [commit] Werner Almesberger: solidify/Makefile (LDFLAGS): rename to LDLIBS (master) http://qi-hw.com/p/cae-tools/9de0b43 | 04:31 |
---|
qi-bot | [commit] Alexandre Vicenzi: Added Brazilian Portuguese translation (master) http://qi-hw.com/p/gmenu2x/289d0e7 | 00:15 |
---|
qi-bot | [commit] Paul Cercueil: Fix extremely rare and extremely weird bug (master) http://qi-hw.com/p/gmenu2x/8364e11 | 02:26 |
---|
qi-bot | [commit] Nebuleon Fumika: Fix a crasher when launching an application whose icon is corrupt (master) http://qi-hw.com/p/gmenu2x/5758209 | 14:35 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: If directory entry is a symbolic link, fall back on stat() (master) http://qi-hw.com/p/gmenu2x/3eb3a8e | 14:35 |
qi-bot | [commit] Maarten ter Huurne: Don't assume that all non-directories are regular files (master) http://qi-hw.com/p/gmenu2x/c7a5b87 | 14:35 |
qi-bot | [commit] Maarten ter Huurne: Don't apply realpath() to entered subdirs in Selector (master) http://qi-hw.com/p/gmenu2x/7b2c26c | 14:35 |
qi-bot | [commit] Maarten ter Huurne: Implement fileExists() using access() instead of open/close (master) http://qi-hw.com/p/gmenu2x/98f15d7 | 10:52 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: Removed redundant exists check from Menu::openPackagesFromDir (master) http://qi-hw.com/p/gmenu2x/23205dc | 10:52 |
qi-bot | [commit] Maarten ter Huurne: If an app settings file is empty, remove it (master) http://qi-hw.com/p/gmenu2x/07eefb2 | 10:52 |
qi-bot | [commit] Maarten ter Huurne: Pass file name as std::string to readFileAsString (master) http://qi-hw.com/p/gmenu2x/956a9b6 | 14:43 |
qi-bot | [commit] Maarten ter Huurne: Write app settings files atomically (master) http://qi-hw.com/p/gmenu2x/fc4582a | 14:43 |
qi-bot | [commit] Maarten ter Huurne: Make app setting file writes durable (master) http://qi-hw.com/p/gmenu2x/9f1827d | 14:43 |
qi-bot | [commit] Maarten ter Huurne: Add more detail in error message from Monitor::run() (master) http://qi-hw.com/p/gmenu2x/4740e27 | 14:43 |
qi-bot | [commit] Maarten ter Huurne: Don't start Monitor on non-existant paths (master) http://qi-hw.com/p/gmenu2x/104d749 | 14:43 |
qi-bot | [commit] Maarten ter Huurne: Make writeStringToFile resilient against short writes (master) http://qi-hw.com/p/gmenu2x/e12c896 | 22:22 |
qi-bot | [commit] Maarten ter Huurne: Improved handling of platform specific open flags (master) http://qi-hw.com/p/gmenu2x/fe790b1 | 22:22 |
qi-bot | [commit] Maarten ter Huurne: Don't use file system write permissions to determine "deletable" (master) http://qi-hw.com/p/gmenu2x/5805d78 | 22:22 |
qi-bot | [commit] Maarten ter Huurne: For now, consider non-deletable applications to be immutable (master) http://qi-hw.com/p/gmenu2x/e827b2f | 22:22 |
qi-bot | [commit] Maarten ter Huurne: Avoid rewriting non-editable app settings (master) http://qi-hw.com/p/gmenu2x/482bd09 | 22:22 |
qi-bot | [commit] Maarten ter Huurne: Make system calls restart on signals instead of handling EINTR (master) http://qi-hw.com/p/gmenu2x/4550eeb | 22:22 |
qi-bot | [commit] Maarten ter Huurne: Provide file permissions for newly created file (master) http://qi-hw.com/p/gmenu2x/b938c41 | 22:22 |
qi-bot | [commit] Maarten ter Huurne: Renamed SettingsDialog::voices to settings (master) http://qi-hw.com/p/gmenu2x/8a1bb56 | 09:22 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: Use unique_ptr to make ownership of MenuSettings explicit (master) http://qi-hw.com/p/gmenu2x/faf2495 | 09:22 |
qi-bot | [commit] Maarten ter Huurne: Made SettingsDialog::exec() return whether a setting was changed (master) http://qi-hw.com/p/gmenu2x/e2382e1 | 09:22 |
qi-bot | [commit] Maarten ter Huurne: Made new "no items" text in Selector translatable (master) http://qi-hw.com/p/gmenu2x/9e22b03 | 09:22 |
qi-bot | [commit] Maarten ter Huurne: Deal gracefully with the selector being started on a non-existent dir (master) http://qi-hw.com/p/gmenu2x/0b0e278 | 09:22 |
qi-bot | [commit] Maarten ter Huurne: Do not list ".." as a subdirectory of the root directory (master) http://qi-hw.com/p/gmenu2x/20725fc | 09:22 |
qi-bot | [commit] Maarten ter Huurne: Avoid out-of-range lookup when FileLister::browse is passed empty string (master) http://qi-hw.com/p/gmenu2x/ba09d25 | 09:22 |
qi-bot | [commit] Maarten ter Huurne: When selector goes up from the root directory, stay in the root (master) http://qi-hw.com/p/gmenu2x/bb30ded | 09:22 |
qi-bot | [commit] Maarten ter Huurne: When going up a level in the selector, put cursor on old dir (master) http://qi-hw.com/p/gmenu2x/fe0c7c2 | 09:22 |
qi-bot | [commit] Maarten ter Huurne: Removed ".empty" files for non-empty directories (master) http://qi-hw.com/p/gmenu2x/c3df9c4 | 20:34 |
qi-bot | [commit] Maarten ter Huurne: Disable delete context menu option for undeletable link files (master) http://qi-hw.com/p/gmenu2x/79ef176 | 20:34 |
qi-bot | [commit] Maarten ter Huurne: Pass C++ string to LinkApp constructor (master) http://qi-hw.com/p/gmenu2x/7992d83 | 20:34 |
qi-bot | [commit] Maarten ter Huurne: Be resilient against zero or multiple "Categories" OPK metadata keys (master) http://qi-hw.com/p/gmenu2x/3694dee | 20:34 |
qi-bot | [commit] Maarten ter Huurne: Have Menu::readLinks() sort using orderLinks() (master) http://qi-hw.com/p/gmenu2x/e39447e | 20:34 |
qi-bot | [commit] Maarten ter Huurne: Create LinkApp objects in Menu::readLinksOfSection() (master) http://qi-hw.com/p/gmenu2x/d82ebce | 20:34 |
qi-bot | [commit] Nebuleon Fumika: Fix dynamic allocation of IconButton instances (master) http://qi-hw.com/p/gmenu2x/891525a | 05:15 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: In C++11, it is no longer necessary to avoid ">>" in nested templates (master) http://qi-hw.com/p/gmenu2x/e5a432c | 05:15 |
qi-bot | [commit] Maarten ter Huurne: Removed GMenu2X pointer from ButtonBox (master) http://qi-hw.com/p/gmenu2x/428a316 | 05:15 |
qi-bot | [commit] Maarten ter Huurne: Pass action to IconButton constructor (master) http://qi-hw.com/p/gmenu2x/7e30887 | 05:15 |
qi-bot | [commit] Maarten ter Huurne: Removed "delegate.h" (master) http://qi-hw.com/p/gmenu2x/fe0db48 | 05:15 |
qi-bot | [commit] Nebuleon Fumika: Rearrange calls to GMenu2X::drawButton from left to right (master) http://qi-hw.com/p/gmenu2x/9b583f9 | 05:15 |
qi-bot | [commit] Maarten ter Huurne: Minor cleanups in Selector (master) http://qi-hw.com/p/gmenu2x/88a4d1d | 13:53 |
qi-bot | [commit] Maarten ter Huurne: Improved Selector's handling of the folder icon (master) http://qi-hw.com/p/gmenu2x/d16cb90 | 13:53 |
qi-bot | [commit] Maarten ter Huurne: Log surface load failures at DEBUG level instead of ERROR (master) http://qi-hw.com/p/gmenu2x/ffb736d | 13:53 |
qi-bot | [commit] Maarten ter Huurne: Redistribute any leftover vertical space in Selector (master) http://qi-hw.com/p/gmenu2x/3cce712 | 13:53 |
qi-bot | [commit] Maarten ter Huurne: Make Selector robust against an empty file list (master) http://qi-hw.com/p/gmenu2x/dc39fcc | 13:53 |
qi-bot | [commit] Maarten ter Huurne: Removed skin lookup feature from OffscreenSurface::loadImage (master) http://qi-hw.com/p/gmenu2x/02384c8 | 02:51 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: Fixed compile error on platforms where ENABLE_CPUFREQ is defined (master) http://qi-hw.com/p/gmenu2x/c8ea974 | 02:51 |
qi-bot | [commit] Maarten ter Huurne: Removed static version of SurfaceCollection::getSkinFilePath (master) http://qi-hw.com/p/gmenu2x/6895ac0 | 02:51 |
qi-bot | [commit] Maarten ter Huurne: Have Font::write return the width of the drawn text (master) http://qi-hw.com/p/gmenu2x/ab7a4c1 | 02:51 |
qi-bot | [commit] Maarten ter Huurne: Store "bgmain" in the GMenu2X object instead of in SurfaceCollection (master) http://qi-hw.com/p/gmenu2x/7134eb3 | 02:51 |
qi-bot | [commit] Maarten ter Huurne: Store Menu's Monitors in unique_ptrs (master) http://qi-hw.com/p/gmenu2x/d66ca94 | 16:55 |
qi-bot | [commit] Maarten ter Huurne: Don't use (void) for empty argument list (master) http://qi-hw.com/p/gmenu2x/6e8491a | 16:55 |
qi-bot | [commit] Maarten ter Huurne: Don't use string::compare if there are better alternatives (master) http://qi-hw.com/p/gmenu2x/739a946 | 16:55 |
qi-bot | [commit] Maarten ter Huurne: Minor optimizations in Menu (master) http://qi-hw.com/p/gmenu2x/b202f19 | 16:55 |
qi-bot | [commit] Maarten ter Huurne: In GMenu2X::drawButton, don't build a rectangle if we only need width (master) http://qi-hw.com/p/gmenu2x/c1d57b6 | 16:55 |
qi-bot | [commit] Maarten ter Huurne: Simplify code to reload section icons when skin changes (master) http://qi-hw.com/p/gmenu2x/faf0287 | 16:55 |
qi-bot | [commit] Maarten ter Huurne: Removed GMenu2X::drawButton variant (master) http://qi-hw.com/p/gmenu2x/8e885bc | 16:55 |
qi-bot | [commit] Maarten ter Huurne: Changed icon lookup in GMenu2X::drawButton(Right) (master) http://qi-hw.com/p/gmenu2x/4530405 | 16:55 |
qi-bot | [commit] Maarten ter Huurne: Handle labelless icon positioning in GMenu2X::drawButton(Right) (master) http://qi-hw.com/p/gmenu2x/3df841c | 16:55 |
qi-bot | [commit] Maarten ter Huurne: Simplify bottom bar button drawing in Selector (master) http://qi-hw.com/p/gmenu2x/004c41e | 16:55 |
qi-bot | [commit] Maarten ter Huurne: Show a file selector in OPK links only if Exec requires a file (master) http://qi-hw.com/p/gmenu2x/60aaf59 | 00:12 |
---|---|---|
qi-bot | [commit] Nebuleon Fumika: Properly save the value of Selector Browser after editing a link (master) http://qi-hw.com/p/gmenu2x/d51fbb8 | 00:12 |
qi-bot | [commit] Maarten ter Huurne: Replaced generic exclude mechanism by updir filter in FileLister (master) http://qi-hw.com/p/gmenu2x/eb3def1 | 03:39 |
qi-bot | [commit] Maarten ter Huurne: Put trivial FileLister method implementations in header (master) http://qi-hw.com/p/gmenu2x/ba47744 | 03:39 |
qi-bot | [commit] Maarten ter Huurne: Removed FileLister::at (master) http://qi-hw.com/p/gmenu2x/85b072c | 03:39 |
qi-bot | [commit] Maarten ter Huurne: Removed FileLister::insertFile (master) http://qi-hw.com/p/gmenu2x/a505d3e | 03:39 |
qi-bot | [commit] Maarten ter Huurne: Skip stat() call when the d_type field can tell us the file type (master) http://qi-hw.com/p/gmenu2x/b6f6bb3 | 03:39 |
qi-bot | [commit] Maarten ter Huurne: Convert file name to C++ string as late as possible (master) http://qi-hw.com/p/gmenu2x/56beec0 | 03:39 |
qi-bot | [commit] Maarten ter Huurne: Use proper feature test macro for d_type support (master) http://qi-hw.com/p/gmenu2x/404b2a1 | 04:46 |
qi-bot | [commit] Maarten ter Huurne: Simplified file extension filtering code (master) http://qi-hw.com/p/gmenu2x/47d349f | 04:46 |
qi-bot | [commit] Maarten ter Huurne: Set close-on-exec flag on inotify file descriptor (master) http://qi-hw.com/p/gmenu2x/6a2a096 | 05:31 |
qi-bot | [commit] Maarten ter Huurne: Various cleanups in PowerSaver (master) http://qi-hw.com/p/gmenu2x/8d662c9 | 07:55 |
qi-bot | [commit] Maarten ter Huurne: Dismantled Singleton pattern of PowerSaver (master) http://qi-hw.com/p/gmenu2x/c1689e4 | 07:55 |
qi-bot | [commit] Maarten ter Huurne: Explicitly enable screen when PowerSaver exits (master) http://qi-hw.com/p/gmenu2x/2c47515 | 07:55 |
qi-bot | [commit] Nebuleon Fumika: Remove unnecessary file existence check in GMenu2X::readConfig(string) (master) http://qi-hw.com/p/gmenu2x/457fb0a | 01:33 |
---|---|---|
qi-bot | [commit] Nebuleon Fumika: Remove unnecessary file existence check in main (master) http://qi-hw.com/p/gmenu2x/ebb34f3 | 01:33 |
qi-bot | [commit] Nebuleon Fumika: Remove unnecessary file existence check in GMenu2X::setSkin(2) (master) http://qi-hw.com/p/gmenu2x/d6b2643 | 01:33 |
qi-bot | [commit] Nebuleon Fumika: Remove unnecessary file existence check in GMenu2X -> InputManager (master) http://qi-hw.com/p/gmenu2x/ab27096 | 01:33 |
qi-bot | [commit] Nebuleon Fumika: When editing colors, show the selected color component using its color (master) http://qi-hw.com/p/gmenu2x/1508ac8 | 05:46 |
qi-bot | [commit] Nebuleon Fumika: Split creation, configuration and use of FileLister objects (master) http://qi-hw.com/p/gmenu2x/1dec6f6 | 05:46 |
qi-bot | [commit] Nebuleon Fumika: Use a plain FileLister instead of a pointer in BrowseDialog (master) http://qi-hw.com/p/gmenu2x/0b78577 | 05:46 |
qi-bot | [commit] Nebuleon Fumika: Pre-process the filter string in FileLister::setFilter (master) http://qi-hw.com/p/gmenu2x/bd7eac3 | 05:46 |
qi-bot | [commit] Nebuleon Fumika: Optimise duplicate checking and sorting in FileLister::browse (master) http://qi-hw.com/p/gmenu2x/f1e9242 | 05:46 |
qi-bot | [commit] Maarten ter Huurne: Move instead of copy strings at the end of FileLister::browse (master) http://qi-hw.com/p/gmenu2x/46c64ea | 05:46 |
qi-bot | [commit] Maarten ter Huurne: Removed special case handling for !(showDirectories || showFiles) (master) http://qi-hw.com/p/gmenu2x/2c76dda | 05:46 |
qi-bot | [commit] Maarten ter Huurne: In FileLister::browse, declare variables when they are needed (master) http://qi-hw.com/p/gmenu2x/90a5f82 | 05:46 |
qi-bot | [commit] Maarten ter Huurne: Avoid moving around entries unless new ones were found (master) http://qi-hw.com/p/gmenu2x/13f574b | 05:46 |
qi-bot | [commit] Nebuleon Fumika: Set the clock to 0 before reading application link files (master) http://qi-hw.com/p/gmenu2x/82ac7ef | 05:46 |
qi-bot | [commit] Nebuleon Fumika: Remove unnecessary file existence check in GMenu2X::readTmp() (master) http://qi-hw.com/p/gmenu2x/8cd3ab8 | 21:43 |
qi-bot | [commit] Nebuleon Fumika: Remove unnecessary file existence check in GMenu2X::writeSkinConfig (master) http://qi-hw.com/p/gmenu2x/a60a529 | 21:43 |
qi-bot | [commit] Nebuleon Fumika: Remove unnecessary file existence check in GMenu2X::showSettings() (master) http://qi-hw.com/p/gmenu2x/cf896e6 | 21:43 |
qi-bot | [commit] Nebuleon Fumika: Remove unnecessary file existence check in WallpaperDialog::exec() (master) http://qi-hw.com/p/gmenu2x/f85ef14 | 21:43 |
qi-bot | [commit] Maarten ter Huurne: Make FileLister::browse not log a non-existing directory as an error (master) http://qi-hw.com/p/gmenu2x/3572417 | 21:43 |
qi-bot | [commit] Maarten ter Huurne: Apply a minimum size for the scroll bar thumb (master) http://qi-hw.com/p/gmenu2x/6492ab2 | 07:19 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: Fixed misleading indentation in Menu::addActionLink (master) http://qi-hw.com/p/gmenu2x/cc38c8e | 07:19 |
qi-bot | [commit] Maarten ter Huurne: Require valid section index passed to Menu::addActionLink (master) http://qi-hw.com/p/gmenu2x/b15175b | 07:19 |
qi-bot | [commit] Maarten ter Huurne: Minor cleanups in Selector::exec (master) http://qi-hw.com/p/gmenu2x/3305cf2 | 07:19 |
qi-bot | [commit] Maarten ter Huurne: Removed screenshot caching from Selector (master) http://qi-hw.com/p/gmenu2x/1229ef3 | 07:19 |
qi-bot | [commit] Maarten ter Huurne: Removed SurfaceCollection::defaultAlpha (master) http://qi-hw.com/p/gmenu2x/aa5d8fa | 07:19 |
qi-bot | [commit] Maarten ter Huurne: Moved code to remove a file name extension into utilities module (master) http://qi-hw.com/p/gmenu2x/1e50dff | 07:19 |
qi-bot | [commit] Maarten ter Huurne: Don't pre-strip file name extensions in Selector (master) http://qi-hw.com/p/gmenu2x/a741653 | 07:19 |
qi-bot | [commit] Maarten ter Huurne: Created separate subclasses for output and off-screen surfaces (master) http://qi-hw.com/p/gmenu2x/4bd1c79 | 11:29 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ircstat/ML: update for 2014-07 (master) http://qi-hw.com/p/wernermisc/29ac553 | 12:22 |
qi-bot | [commit] Maarten ter Huurne: Removed most uses of naked Surface pointers (master) http://qi-hw.com/p/gmenu2x/60183e5 | 12:32 |
qi-bot | [commit] Maarten ter Huurne: Removed ChangeLog again (master) http://qi-hw.com/p/gmenu2x/3a57912 | 04:36 |
---|
qi-bot | [commit] Nebuleon Fumika: When computing the width of multi-line text, split lines and return the longest (master) http://qi-hw.com/p/gmenu2x/a468b33 | 10:45 |
---|---|---|
qi-bot | [commit] Nebuleon Fumika: Fix the bounding box of message boxes (master) http://qi-hw.com/p/gmenu2x/b08a285 | 10:45 |
qi-bot | [commit] Nebuleon Fumika: Implement word wrapping as a method of Font (master) http://qi-hw.com/p/gmenu2x/0c860e8 | 10:45 |
qi-bot | [commit] Nebuleon Fumika: Use Font::wordWrap in TextDialog and TextManualDialog (master) http://qi-hw.com/p/gmenu2x/d0de870 | 10:45 |
qi-bot | [commit] Maarten ter Huurne: Made text file reading more efficient and robust (master) http://qi-hw.com/p/gmenu2x/485bab3 | 10:45 |
qi-bot | [commit] Nebuleon Fumika: Wrap long subtitles to multiple lines in Dialog::writeSubTitle (master) http://qi-hw.com/p/gmenu2x/15472a0 | 10:45 |
qi-bot | [commit] Nebuleon Fumika: Cap the width of setting names in SettingDialog to the width of the longest (master) http://qi-hw.com/p/gmenu2x/bac622f | 10:45 |
qi-bot | [commit] Maarten ter Huurne: Changed word wrapping to avoid trailing empty line (master) http://qi-hw.com/p/gmenu2x/e44db20 | 10:45 |
qi-bot | [commit] KouenHasuki: Update Norwegian (master) http://qi-hw.com/p/gmenu2x/c1b9889 | 10:45 |
qi-bot | [commit] Maarten ter Huurne: Removed ChangeLog (master) http://qi-hw.com/p/gmenu2x/48dcfc9 | 12:58 |
qi-bot | [commit] Maarten ter Huurne: Use a single "about.txt" for all platforms (master) http://qi-hw.com/p/gmenu2x/8722b35 | 12:58 |
qi-bot | [commit] Maarten ter Huurne: Update translation credit for Norwegian (master) http://qi-hw.com/p/gmenu2x/5af64ef | 12:58 |
qi-bot | [commit] Maarten ter Huurne: Make a pro-forma ChangeLog file (master) http://qi-hw.com/p/gmenu2x/98413ba | 18:38 |
qi-bot | [commit] Maarten ter Huurne: Revert "Removed support for multi-line text drawing" (master) http://qi-hw.com/p/gmenu2x/d4344c7 | 00:47 |
---|
qi-bot | [commit] Zear: Added the Polish gmenu2x translation (master) http://qi-hw.com/p/gmenu2x/826d4bb | 23:57 |
---|
qi-bot | [commit] Maarten ter Huurne: Don't issue warnings when rendering empty string (master) http://qi-hw.com/p/gmenu2x/5c7ca19 | 01:16 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: Made multi-line text drawing more efficient (master) http://qi-hw.com/p/gmenu2x/2effd1f | 01:16 |
qi-bot | [commit] Maarten ter Huurne: Removed support for multi-line text drawing (master) http://qi-hw.com/p/gmenu2x/0908aa7 | 01:16 |
qi-bot | [commit] Nebuleon Fumika: Fix setting default values for configuration entries. (master) http://qi-hw.com/p/gmenu2x/98a63e2 | 01:16 |
qi-bot | [commit] Nebuleon Fumika: Make the button repeat rate (after the first repetition) a user setting. (master) http://qi-hw.com/p/gmenu2x/9c4e97c | 01:16 |
qi-bot | [commit] Maarten ter Huurne: Removed unnecessary includes of SDL_gfx header (master) http://qi-hw.com/p/gmenu2x/0810a26 | 01:16 |
qi-bot | [commit] Maarten ter Huurne: Removed dedicated horizontal line routine (master) http://qi-hw.com/p/gmenu2x/86ee995 | 01:16 |
qi-bot | [commit] Maarten ter Huurne: Removed return code from surface drawing methods (master) http://qi-hw.com/p/gmenu2x/2a4b519 | 01:16 |
qi-bot | [commit] Maarten ter Huurne: Made RGBAColor components 8 bits wide (master) http://qi-hw.com/p/gmenu2x/950518f | 01:16 |
qi-bot | [commit] Maarten ter Huurne: Made strtorgba into a factory method of RGBAColor (master) http://qi-hw.com/p/gmenu2x/5f454a8 | 01:16 |
qi-bot | [commit] Maarten ter Huurne: Add constructors for RGBAColor (master) http://qi-hw.com/p/gmenu2x/dd27cb2 | 01:16 |
qi-bot | [commit] Maarten ter Huurne: Made rect+color the preferred argument style for (filled) rectangle drawing (master) http://qi-hw.com/p/gmenu2x/9df565b | 01:16 |
qi-bot | [commit] Maarten ter Huurne: Use our own alpha blended rectangle fill instead of SDL_gfx (master) http://qi-hw.com/p/gmenu2x/0dd027f | 01:16 |
qi-bot | [commit] Maarten ter Huurne: Use our own alpha blended rectangle outline instead of SDL_gfx (master) http://qi-hw.com/p/gmenu2x/08ffbc7 | 01:16 |
qi-bot | [commit] Maarten ter Huurne: Remove SDL_gfx as a dependency (master) http://qi-hw.com/p/gmenu2x/de2fdfc | 01:16 |
qi-bot | [commit] Maarten ter Huurne: Optimized PNG encoding (master) http://qi-hw.com/p/gmenu2x/9d0a495 | 01:16 |
qi-bot | [commit] Zear: Introduced custom application launch text (master) http://qi-hw.com/p/gmenu2x/cdf4ef1 | 01:16 |
qi-bot | [commit] Maarten ter Huurne: Use horizontal ruler in About texts (master) http://qi-hw.com/p/gmenu2x/5e31df9 | 01:16 |
qi-bot | [commit] Maarten ter Huurne: Clean up trim() utility function (master) http://qi-hw.com/p/gmenu2x/9b93eab | 01:16 |
qi-bot | [commit] Nebuleon Fumika: TextDialog: Improve the average and worst-case performance of word wrapping (master) http://qi-hw.com/p/gmenu2x/69d6c00 | 01:16 |
qi-bot | [commit] Maarten ter Huurne: Implemented stream output for RGBAColor (master) http://qi-hw.com/p/gmenu2x/79dcc8a | 10:10 |
qi-bot | [commit] Apelete Seketeli: mmc: jz4740: prepare next dma transfer in parallel with current transfer (jz-3.15) http://qi-hw.com/p/qi-kernel/651ef2f | 19:07 |
qi-bot | [commit] Maarten ter Huurne: Add icons that were missing in 320x240 Default skin (master) http://qi-hw.com/p/gmenu2x/4744b5e | 22:15 |
qi-bot | [commit] Maarten ter Huurne: Add imgv (image viewer) icon to 320x240 Scanlines* skins (master) http://qi-hw.com/p/gmenu2x/c311a7f | 22:15 |
qi-bot | [commit] Paul Cercueil: Remove the 'Selector alias file' feature (master) http://qi-hw.com/p/gmenu2x/c72266d | 12:27 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Remove the 'Show root' option, which didn't do anything (master) http://qi-hw.com/p/gmenu2x/5e22dd5 | 12:27 |
qi-bot | [commit] Paul Cercueil: Various changes related to translations (master) http://qi-hw.com/p/gmenu2x/917cbf7 | 12:27 |
qi-bot | [commit] Paul Cercueil: Greatly improve the French translation (master) http://qi-hw.com/p/gmenu2x/c777de2 | 12:27 |
qi-bot | [commit] Werner Almesberger: ircstat/ML: update for 2014-05 (master) http://qi-hw.com/p/wernermisc/e0063a9 | 06:09 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ircstat/ML: update for 2014-06 (master) http://qi-hw.com/p/wernermisc/b803a3c | 06:09 |
qi-bot | [commit] Apelete Seketeli: dma: jz4740: complete descriptor before marking it null (jz-3.15) http://qi-hw.com/p/qi-kernel/5230584 | 21:09 |
---|---|---|
qi-bot | [commit] Apelete Seketeli: mmc: jz4740: add dma infrastructure for data transfers (jz-3.15) http://qi-hw.com/p/qi-kernel/fb4c09d | 21:09 |
qi-bot | [commit] Werner Almesberger: modules/1059.fpd (1059, 1060): Keystone CR2032 battery holders (TH and SMT) (master) http://qi-hw.com/p/kicad-libs/b7d32fa | 05:19 |
---|---|---|
qi-bot | [commit] Werner Almesberger: modules/HIERARCHY: added more sub-caregories for Connector/{SMT, TH} (master) http://qi-hw.com/p/kicad-libs/e83674a | 05:19 |
qi-bot | [commit] Werner Almesberger: modules/1059.fpd: renamed 1059, 1060 to KS-* to avoid confusion with stdpass (master) http://qi-hw.com/p/kicad-libs/365de11 | 05:27 |
qi-bot | [commit] Werner Almesberger: dsv/dsv: add Z tag to select files in ZIP archive not ending in .zip (master) http://qi-hw.com/p/eda-tools/7067c00 | 13:35 |
qi-bot | [commit] Werner Almesberger: dsv/dsv: change indentation to tab instead of 4 spaces; fix typo (master) http://qi-hw.com/p/eda-tools/8c5d7d7 | 13:35 |
qi-bot | [commit] Werner Almesberger: rptflt/rptflt.pl: filter for KiCad DRC reports (master) http://qi-hw.com/p/eda-tools/c07e33b | 13:35 |
qi-bot | [commit] Werner Almesberger: modules/stdpass.fpd (xtal2-3.2mmx1.5mm): add crystal footprint (master) http://qi-hw.com/p/kicad-libs/bd36637 | 17:54 |
---|
qi-bot | [commit] Maarten ter Huurne: Fixed compilation with GCC 4.9 (master) http://qi-hw.com/p/gmenu2x/9e113d8 | 19:19 |
---|
qi-bot | [commit] Paul Cercueil: Don't consider *.dge files as being executables (master) http://qi-hw.com/p/gmenu2x/fe1a586 | 12:00 |
---|
qi-bot | [commit] Werner Almesberger: modules/sod.fpd: added SOD-323 (master) http://qi-hw.com/p/kicad-libs/083e2b0 | 13:45 |
---|
qi-bot | [commit] Werner Almesberger: ircstat/ML: update for 2014-04 (master) http://qi-hw.com/p/wernermisc/3174811 | 00:27 |
---|
qi-bot | [commit] Werner Almesberger: cameo/templates/mkmk-simple: make $NAME.drl optional (master) http://qi-hw.com/p/cae-tools/671b74d | 20:59 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Show the background while loading the menu (master) http://qi-hw.com/p/gmenu2x/dac1e49 | 22:22 |
qi-bot | [commit] Paul Cercueil: Allow to map actions to keyboard keys and joystick keys at the same time (master) http://qi-hw.com/p/gmenu2x/5fa8919 | 14:09 |
---|
qi-bot | [commit] Paul Cercueil: Fix text in log viewer disappearing when pressing alt-right (master) http://qi-hw.com/p/gmenu2x/47b098c | 07:12 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Re-insert proper detection of the %f tokens for OPK apps (master) http://qi-hw.com/p/gmenu2x/92a6453 | 07:12 |
qi-bot | [commit] Paul Cercueil: Init the Menu before initializing SDL (master) http://qi-hw.com/p/gmenu2x/9fba35f | 22:13 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Init SDL timers before creating the menu (master) http://qi-hw.com/p/gmenu2x/b1eedf6 | 22:28 |
qi-bot | [commit] Werner Almesberger: ircstat/ML: update for 2014-03 (master) http://qi-hw.com/p/wernermisc/a9ee519 | 01:30 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ircstat/README: run "mlabs" for IRC statistics (master) http://qi-hw.com/p/wernermisc/5a34af4 | 01:30 |
qi-bot | [commit] Werner Almesberger: atusb/fw/: support alternative interface names with DFU (master) http://qi-hw.com/p/ben-wpan/f1e689e | 00:04 |
---|
qi-bot | [commit] Werner Almesberger: atusb/fw/: DFU: support multiple sets of flash operations; support multiple alt settings (master) http://qi-hw.com/p/ben-wpan/8f2f13c | 20:28 |
---|
qi-bot | [commit] Werner Almesberger: ubbctl/README: fix typo in example (master) http://qi-hw.com/p/ben-blinkenlights/77a7a38 | 13:42 |
---|---|---|
qi-bot | [commit] Werner Almesberger: libubb/include/ubb/regbase.h (PDTRGx): add trigger mode registers (master) http://qi-hw.com/p/ben-blinkenlights/3f5c052 | 14:42 |
qi-bot | [commit] Werner Almesberger: ubbctl/: also support decoding and setting of interrupts and alternate functions (master) http://qi-hw.com/p/ben-blinkenlights/9e223f7 | 14:42 |
qi-bot | [commit] Paul Cercueil: Fix one icon of the GCW skin (master) http://qi-hw.com/p/gmenu2x/eae7156 | 18:05 |
---|
qi-bot | [commit] Paul Cercueil: Added ScanlinesBlue and ScanlinesRed themes (master) http://qi-hw.com/p/gmenu2x/fd2c4fd | 16:54 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Added GCW theme by Nebuleon (master) http://qi-hw.com/p/gmenu2x/8a560e4 | 16:54 |
qi-bot | [commit] Werner Almesberger: ircstat/mlstat: change "milkymist" label to "m-labs" (master) http://qi-hw.com/p/wernermisc/b64d467 | 19:06 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ircstat/ML: update for 2014-02 (master) http://qi-hw.com/p/wernermisc/84ad9d4 | 19:06 |
qi-bot | [commit] Werner Almesberger: atusb/fw/usb/: change a few more uses of ../board.h to board.h (master) http://qi-hw.com/p/ben-wpan/8b08594 | 21:06 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Fix key repeat of analog stick working only on some screens (master) http://qi-hw.com/p/gmenu2x/b087e5c | 21:35 |
qi-bot | [commit] Paul Cercueil: Fix launching non-OPK apps with files with special characters (master) http://qi-hw.com/p/gmenu2x/c19e789 | 16:00 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Added key repeat on analog sticks and hats (master) http://qi-hw.com/p/gmenu2x/7777b9e | 16:00 |
qi-bot | [commit] Paul Cercueil: Show disk usage of the home partition, not the one mounted on /boot (master) http://qi-hw.com/p/gmenu2x/b084681 | 12:44 |
---|
qi-bot | [commit] Paul Cercueil: Fix launching OPKs with a file containing spaces (opkrun) http://qi-hw.com/p/gmenu2x/1a1f891 | 13:54 |
---|---|---|
qi-bot | [commit] Paul Cercueil: linkapp.cpp: remove dead/useless code (opkrun) http://qi-hw.com/p/gmenu2x/a7f0fef | 13:54 |
qi-bot | [commit] Paul Cercueil: Revert to launching in the shell for non-OPK apps (opkrun) http://qi-hw.com/p/gmenu2x/55a6528 | 15:27 |
qi-bot | [commit] Paul Cercueil: Use 'opkrun' to execute OPK files (master) http://qi-hw.com/p/gmenu2x/7c1af3a | 15:30 |
qi-bot | [commit] Paul Cercueil: Redirect to log by redefining stdout and stderr (master) http://qi-hw.com/p/gmenu2x/6ef3f3b | 15:30 |
qi-bot | [commit] Paul Cercueil: Execute the links directly, don't use the shell (master) http://qi-hw.com/p/gmenu2x/2ab4448 | 15:30 |
qi-bot | [commit] Paul Cercueil: Fix launching OPKs with a file containing spaces (master) http://qi-hw.com/p/gmenu2x/1a1f891 | 15:30 |
qi-bot | [commit] Paul Cercueil: linkapp.cpp: remove dead/useless code (master) http://qi-hw.com/p/gmenu2x/a7f0fef | 15:30 |
qi-bot | [commit] Paul Cercueil: Revert to launching in the shell for non-OPK apps (master) http://qi-hw.com/p/gmenu2x/55a6528 | 15:30 |
qi-bot | [commit] Paul Cercueil: Merge branch 'opkrun' (master) http://qi-hw.com/p/gmenu2x/0fd8333 | 15:30 |
qi-bot | [commit] Werner Almesberger: cameo/fped2d2z.pl: hack: maintain decimal point across flipping (master) http://qi-hw.com/p/cae-tools/453f64e | 05:39 |
---|
qi-bot | [commit] Werner Almesberger: ircstat/mlabs: not very smart script to download monthly log of #m-labs (master) http://qi-hw.com/p/wernermisc/62bd73e | 22:51 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ircstat/README: change date format from MMYY to YYMM (master) http://qi-hw.com/p/wernermisc/ebb0d27 | 22:51 |
qi-bot | [commit] Werner Almesberger: ircstat/mlstat, stat: add the new year (2014) (master) http://qi-hw.com/p/wernermisc/037d65c | 22:51 |
qi-bot | [commit] Werner Almesberger: ircstat/ML: update for 2014-01 (master) http://qi-hw.com/p/wernermisc/57b53c6 | 22:51 |
qi-bot | [commit] Werner Almesberger: modules/pogo.fpd: add Mill-Max 09xx series TH pogo pins (master) http://qi-hw.com/p/kicad-libs/384ad5e | 17:50 |
---|---|---|
qi-bot | [commit] Werner Almesberger: modules/HIERARCHY: give switches their own top-level category (master) http://qi-hw.com/p/kicad-libs/feb8508 | 17:50 |
qi-bot | [commit] Werner Almesberger: modules/HIERARCHY: move FIDUCIAL from "Mechanical" to "Structure" (master) http://qi-hw.com/p/kicad-libs/63e8c0d | 17:50 |
qi-bot | [commit] Werner Almesberger: modules/spacer.fpd: add 7.5 mm clearance (bare screw/nut) (master) http://qi-hw.com/p/kicad-libs/a89a1d5 | 17:50 |
qi-bot | [commit] Xiangfu: update libusb name to libusb-compat (master) http://qi-hw.com/p/openwrt-packages/bfeda4f | 13:08 |
---|---|---|
qi-bot | [commit] Xiangfu: update libusb name (master) http://qi-hw.com/p/openwrt-packages/7c906f0 | 13:10 |
qi-bot | [commit] Paul Cercueil: Sort links once they have all been added to the menu (master) http://qi-hw.com/p/gmenu2x/8bb58f6 | 22:11 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Change sort order so that OPKs are listed after normal links (master) http://qi-hw.com/p/gmenu2x/1792e63 | 22:11 |
qi-bot | [commit] Werner Almesberger: modules/usb_a_rcpt_mid.fpd: enlarge 48458 bay by tolerance (master) http://qi-hw.com/p/kicad-libs/d83737d | 19:14 |
---|
qi-bot | [commit] Werner Almesberger: modules/pads.fpd: add -NOSILK variants; add silk measurements for rectangular pads (master) http://qi-hw.com/p/kicad-libs/76039af | 23:25 |
---|
qi-bot | [commit] Paul Cercueil: Remove hardcoded sizes and positions in Selector (master) http://qi-hw.com/p/gmenu2x/ca3df65 | 00:20 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Pass a Surface to ButtonBox' and IconButton's paint function (master) http://qi-hw.com/p/gmenu2x/cfb96dd | 00:20 |
qi-bot | [commit] Paul Cercueil: Fix BrowseDialog and InputDialog rendering incorrectly (master) http://qi-hw.com/p/gmenu2x/ae6f52a | 00:20 |
qi-bot | [commit] Werner Almesberger: modules/qfn.fpd (QFN32-Freescale): make pads round to increase clearance (master) http://qi-hw.com/p/kicad-libs/6b825eb | 00:59 |
qi-bot | [commit] Werner Almesberger: modules/qfn.fpd (QFN32-CC2543): experimental footprint with large center hole (for DIY) (master) http://qi-hw.com/p/kicad-libs/83fc1ab | 00:59 |
qi-bot | [commit] Werner Almesberger: modules/usb_a_rcpt_mid.fpd: remove solder paste from through-holes (master) http://qi-hw.com/p/kicad-libs/b0352b4 | 01:04 |
qi-bot | [commit] Paul Cercueil: Remove hardcoded sizes and positions in WallpaperDialog (master) http://qi-hw.com/p/gmenu2x/408a991 | 15:03 |
qi-bot | [commit] Paul Cercueil: Set row size to 20px minimum in file list if browsing directories (master) http://qi-hw.com/p/gmenu2x/e63ad99 | 15:03 |
qi-bot | [commit] Paul Cercueil: Remove "scan for applications and games" feature (master) http://qi-hw.com/p/gmenu2x/ad30fae | 15:08 |
qi-bot | [commit] Paul Cercueil: Set default link size to 80x50 (master) http://qi-hw.com/p/gmenu2x/cb82d55 | 15:27 |
qi-bot | [commit] Paul Cercueil: Delete obsolete 320x240 skin "2010-12-14" (master) http://qi-hw.com/p/gmenu2x/261002d | 15:27 |
qi-bot | [commit] Paul Cercueil: Delete obsolete 320x240 skin "OD" (master) http://qi-hw.com/p/gmenu2x/1d532c9 | 15:39 |
qi-bot | [commit] Werner Almesberger: modules/meander-2450MHz.fpd: 1.6 mm variant from CC-Antenna-DK, board #15 (master) http://qi-hw.com/p/kicad-libs/5bfda4d | 16:20 |
qi-bot | [commit] Paul Cercueil: InputManager: Handle joystick hat events (master) http://qi-hw.com/p/gmenu2x/c8cf377 | 19:32 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Allow the skin to change the font and font size (master) http://qi-hw.com/p/gmenu2x/af25853 | 19:32 |
qi-bot | [commit] Paul Cercueil: Handle the skin: prefix on the font path (master) http://qi-hw.com/p/gmenu2x/67ac54e | 21:07 |
qi-bot | [commit] Werner Almesberger: components/switch.lib: add SW-SPDT-S4 (on-on switch with four shell pads) (master) http://qi-hw.com/p/kicad-libs/66f316b | 06:23 |
---|---|---|
qi-bot | [commit] Werner Almesberger: components/cc2543.lib: increase pin spacing by 1.5x (master) http://qi-hw.com/p/kicad-libs/247b1de | 06:23 |
qi-bot | [commit] Werner Almesberger: components/cc2543.lib: fix pin types (master) http://qi-hw.com/p/kicad-libs/fe9e22a | 06:23 |
qi-bot | [commit] Werner Almesberger: modules/sw-spdt-smt.fpd: add SW-CUS12B (for Copal CUS-12B and C&K PCM12SMTR) (master) http://qi-hw.com/p/kicad-libs/fc2d104 | 00:13 |
---|
qi-bot | [commit] Werner Almesberger: ircstat/stat: add processing of irclog.whitequark.org; rename #milkymist to #m-labs (master) http://qi-hw.com/p/wernermisc/1fab23c | 12:49 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ircstat/ML: update for 12/2013 (master) http://qi-hw.com/p/wernermisc/a27d195 | 12:49 |
qi-bot | [commit] Werner Almesberger: components/cc2543.lib: TI CC2543 2.4 GHz RF SoC (master) http://qi-hw.com/p/kicad-libs/8f98ab7 | 17:31 |
---|---|---|
qi-bot | [commit] Werner Almesberger: modules/usb_a_rcpt_mid.fpd: Molex 48258-0002/0001, TE 1746311 (master) http://qi-hw.com/p/kicad-libs/b19e249 | 17:31 |
qi-bot | [commit] Werner Almesberger: components/components.pro: add aat1217, attiny87-dual, cc2543, dc_jack, testpoint, zener (master) http://qi-hw.com/p/kicad-libs/85ae339 | 17:31 |
qi-bot | [commit] Werner Almesberger: scripts/missing-in-tree: new option -Q to check project.pro (master) http://qi-hw.com/p/kicad-libs/2497d96 | 17:31 |
qi-bot | [commit] Werner Almesberger: scripts/missing-in-tree: new option "-x lib" to exclude libraries (master) http://qi-hw.com/p/kicad-libs/d00f04f | 17:31 |
qi-bot | [commit] Werner Almesberger: components/Makefile (missing): also check components.pro (master) http://qi-hw.com/p/kicad-libs/c4a877a | 17:31 |
qi-bot | [commit] Werner Almesberger: components/usb-a-s4.lib: USB A connector with four ground contacts (master) http://qi-hw.com/p/kicad-libs/ca42a06 | 17:31 |
qi-bot | [commit] Werner Almesberger: components/kl25-32.lib: Freescale Kinetis KL25 in 32 pin package (master) http://qi-hw.com/p/kicad-libs/573eb81 | 19:59 |
qi-bot | [commit] Werner Almesberger: modules/usb_a_rcpt_mid.fpd: correct 48258 drill hole; make pin pads oval (master) http://qi-hw.com/p/kicad-libs/1b997b8 | 19:59 |
qi-bot | [commit] Werner Almesberger: modules/lp2032sm.fpd: MPD Surface Mount Battery Holders for CR2032 (draft) (master) http://qi-hw.com/p/kicad-libs/62c90e2 | 19:59 |
qi-bot | [commit] Werner Almesberger: modules/qfn.fpd (QFN32-Freescale): add footprint for KL25 in 32QFN package (master) http://qi-hw.com/p/kicad-libs/065199a | 19:59 |
qi-bot | [commit] Lars-Peter Clausen: test (master) http://qi-hw.com/p/gmenu2x/30524a0 | 14:51 |
---|
qi-bot | [commit] Lars-Peter Clausen: usb: musb-jz4740: Don't manually free device managed resources (jz-3.12) http://qi-hw.com/p/qi-kernel/ee7dcba | 12:52 |
---|---|---|
qi-bot | [commit] Lars-Peter Clausen: usb: musb-jz4740: Move musb_hdrc_config to the glue driver (jz-3.12) http://qi-hw.com/p/qi-kernel/65b33a2 | 12:52 |
qi-bot | [commit] Lars-Peter Clausen: usb: musb-jz4740: Move jz4740 specific fifo config to the jz4740 glue (jz-3.12) http://qi-hw.com/p/qi-kernel/8187ff7 | 12:52 |
qi-bot | [commit] Lars-Peter Clausen: usb: musb-jz4740: Mask host mode only IRQ bits (jz-3.12) http://qi-hw.com/p/qi-kernel/fbeaeeb | 12:52 |
qi-bot | [commit] Lars-Peter Clausen: usb: musb-jz4740: Remove set_vbus callback (jz-3.12) http://qi-hw.com/p/qi-kernel/af3548b | 12:52 |
qi-bot | [commit] Apelete Seketeli: usb: musb_gadget: use is_otg flag to set gadget peripheral mode on reset (jz-3.12) http://qi-hw.com/p/qi-kernel/f715ea4 | 22:32 |
qi-bot | [commit] Apelete Seketeli: usb: musb: add support for JZ4740 usb device controller (jz-3.12) http://qi-hw.com/p/qi-kernel/03232dd | 11:38 |
---|---|---|
qi-bot | [commit] Apelete Seketeli: usb: musb: fix setting JZ4740 gadget periphal mode on reset (jz-3.12) http://qi-hw.com/p/qi-kernel/77ae279 | 11:38 |
qi-bot | [commit] Apelete Seketeli: mips: qi_lb60: update defconfig for the Ben NanoNote (jz-3.12) http://qi-hw.com/p/qi-kernel/364d81f | 11:38 |
qi-bot | [commit] Paul Cercueil: Do not try to change the permissions of the executables (master) http://qi-hw.com/p/gmenu2x/31ad27f | 11:34 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Don't set called programs as group leaders (master) http://qi-hw.com/p/gmenu2x/53ba01c | 11:34 |
qi-bot | [commit] Werner Almesberger: cameo/fped2stl.pl: hack: maintain decimal point across flipping (master) http://qi-hw.com/p/cae-tools/0fc785d | 22:13 |
---|
qi-bot | [commit] Werner Almesberger: ircstat/ML: update for 11/2013 (master) http://qi-hw.com/p/wernermisc/51106cf | 01:29 |
---|
qi-bot | [commit] Paul Cercueil: Output log to /var/log/gmenu2x.log (master) http://qi-hw.com/p/gmenu2x/246fd86 | 01:29 |
---|---|---|
qi-bot | [commit] Paul Cercueil: InputDialog: Make SETTINGS button confirm and MENU button cancel (master) http://qi-hw.com/p/gmenu2x/61a79cd | 01:29 |
qi-bot | [commit] Werner Almesberger: dsv/dsv: delete .zip file if extraction fails (master) http://qi-hw.com/p/eda-tools/65f93a2 | 01:39 |
---|---|---|
qi-bot | [commit] Werner Almesberger: atusb/fw/usb/usb.h: define PID types (LS/FS) (master) http://qi-hw.com/p/ben-wpan/a80ba86 | 06:11 |
qi-bot | [commit] Werner Almesberger: makefiles/Makefile.kicad (GERBERS): auto-choose between old and new file names (master) http://qi-hw.com/p/ben-wpan/71ad8da | 12:23 |
qi-bot | [commit] Werner Almesberger: cameo/zstack.pl: use the entire number for (x, y, z0) (master) http://qi-hw.com/p/cae-tools/ff5b4a1 | 22:33 |
---|
qi-bot | [commit] Werner Almesberger: cameo/zstack.pl: output one point at (x, y, z0) to set reference level (master) http://qi-hw.com/p/cae-tools/033d55c | 06:42 |
---|---|---|
qi-bot | [commit] Werner Almesberger: gp2rml/gp2rml.c: new option -s to set Z scale factor (master) http://qi-hw.com/p/cae-tools/d64a340 | 06:42 |
qi-bot | [commit] Werner Almesberger: cameo/fped2stl.pl: use "eq" for string equality, not "==" (master) http://qi-hw.com/p/cae-tools/3067665 | 02:25 |
---|---|---|
qi-bot | [commit] Werner Almesberger: cameo/fped2d2z.pl: new options -x and -y to flip on X and Y axis (master) http://qi-hw.com/p/cae-tools/e82667e | 02:25 |
qi-bot | [commit] Werner Almesberger: cae-tools/cameo/fped2stl.pl (flush): substitute coordinates only once (master) http://qi-hw.com/p/cae-tools/e62da4e | 00:20 |
---|---|---|
qi-bot | [commit] Werner Almesberger: cameo/fped2stl.pl: sort layers by Z position (master) http://qi-hw.com/p/cae-tools/4fa9e12 | 21:07 |
qi-bot | [commit] Werner Almesberger: cameo/fped2stl.pl: new options -x and -y to flip on X and Y axis (master) http://qi-hw.com/p/cae-tools/5b70e92 | 21:07 |
qi-bot | [commit] Werner Almesberger: ircstat/ML: update for 10/2013 (master) http://qi-hw.com/p/wernermisc/a804f35 | 12:10 |
---|
qi-bot | [commit] Werner Almesberger: atusb/fw/: let include path find board.h instead of using ../board.h (master) http://qi-hw.com/p/ben-wpan/c5f9cc1 | 14:24 |
---|
qi-bot | [commit] Werner Almesberger: modules/sw-spdt-smt.fpd: draw complete outline of case (master) http://qi-hw.com/p/kicad-libs/e15d2b5 | 23:50 |
---|---|---|
qi-bot | [commit] Werner Almesberger: modules/usb_a_rcpt_smt.fpd: USB A receptacle (master) http://qi-hw.com/p/kicad-libs/bcb5563 | 23:50 |
qi-bot | [commit] Werner Almesberger: genkicat/pdf.c (make_pdf): set paper size to A4 (master) http://qi-hw.com/p/eda-tools/6bfd9d9 | 23:58 |
qi-bot | [commit] Werner Almesberger: poly2d/: add triangulation (untested) (master) http://qi-hw.com/p/cae-tools/f93e93c | 01:14 |
---|---|---|
qi-bot | [commit] Werner Almesberger: poly2d/f2d_tri_holes.cpp (tri_holes_append): rename to f2d_tri_holes_append (master) http://qi-hw.com/p/cae-tools/3d8a8d0 | 01:14 |
qi-bot | [commit] Werner Almesberger: poly2d/p2d_hsort.c (p2d_hier_free): make freeing of polygons optional (master) http://qi-hw.com/p/cae-tools/d758359 | 01:14 |
qi-bot | [commit] Werner Almesberger: poly2d/f2d_tri_holes.cpp (find_point): don't loop forever on closed polygons (master) http://qi-hw.com/p/cae-tools/d0b5696 | 01:14 |
qi-bot | [commit] Werner Almesberger: poly2d/f2d_tri.c (f2d_free_all): free list of faces (master) http://qi-hw.com/p/cae-tools/ca271dd | 01:14 |
qi-bot | [commit] Werner Almesberger: cameo/: add "stl" command to generate STL slices (WIP) (master) http://qi-hw.com/p/cae-tools/8b6e416 | 01:14 |
qi-bot | [commit] Werner Almesberger: poly2d/: store actual values in struct f2d, not pointers (master) http://qi-hw.com/p/cae-tools/626dbe5 | 16:35 |
qi-bot | [commit] Werner Almesberger: cameo/stl.c (stl): update for poly2d API change (master) http://qi-hw.com/p/cae-tools/ae9ad03 | 16:35 |
qi-bot | [commit] Werner Almesberger: Revert "poly2d/p2d_hsort.c (p2d_hier_free): make freeing of polygons optional" (master) http://qi-hw.com/p/cae-tools/ebb7d02 | 16:35 |
qi-bot | [commit] Werner Almesberger: cameo/stl.c: generate real STL (WIP) (master) http://qi-hw.com/p/cae-tools/c5f54df | 16:35 |
qi-bot | [commit] Werner Almesberger: cameo/fped2stl.pl: fped 2D stack to STL mesh converter (experimental) (master) http://qi-hw.com/p/cae-tools/96063cc | 16:35 |
qi-bot | [commit] Werner Almesberger: ircstat/ML: update for 9/2013 (master) http://qi-hw.com/p/wernermisc/f732d7e | 07:38 |
---|
qi-bot | [commit] Werner Almesberger: fab/prettygerbv: update for new file names; add option -y for vertical stacking (master) http://qi-hw.com/p/eda-tools/53d6e1d | 17:14 |
---|
qi-bot | [commit] Werner Almesberger: bin/authors: only include files that still exist (master) http://qi-hw.com/p/wernermisc/a2a7293 | 00:16 |
---|
qi-bot | [commit] Werner Almesberger: gnu30/: slides for GNU30 talk about Free Hardware (master) http://qi-hw.com/p/wernermisc/d1997bd | 08:50 |
---|---|---|
qi-bot | [commit] Werner Almesberger: gnu30/: some small corrections (master) http://qi-hw.com/p/wernermisc/df34bda | 14:57 |
qi-bot | [commit] Werner Almesberger: gnu30/: add URL of slides (master) http://qi-hw.com/p/wernermisc/b95b0e9 | 14:57 |
qi-bot | [commit] Werner Almesberger: gnu30/: minor corrections on the overview slide (master) http://qi-hw.com/p/wernermisc/4c991b7 | 15:05 |
qi-bot | [commit] Werner Almesberger: tools/lib/atusb-common.c (atusb_interrupt_wait): fix embarrassing build failure (master) http://qi-hw.com/p/ben-wpan/4690466 | 17:46 |
qi-bot | [commit] Werner Almesberger: bin/authors: list files in git repo by author, with wildcards (master) http://qi-hw.com/p/wernermisc/9a093fe | 12:57 |
---|---|---|
qi-bot | [commit] Werner Almesberger: modules/zx62-b-5pa.fpd: add ZX62R-B-5P (Micro-USB B reversed) footprint (master) http://qi-hw.com/p/kicad-libs/2f41203 | 13:05 |
qi-bot | [commit] Paul Cercueil: Remove calls to sync() (master) http://qi-hw.com/p/gmenu2x/8452c03 | 22:01 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Remove calls to setInputSpeed(), as it only needs to be called once (master) http://qi-hw.com/p/gmenu2x/217a9b5 | 22:01 |
qi-bot | [commit] Werner Almesberger: modules/er-oled-fpc30.fpd: make pads 0.06 mm wider, 0.1 mm longer (master) http://qi-hw.com/p/kicad-libs/1bed122 | 18:04 |
---|---|---|
qi-bot | [commit] Werner Almesberger: cameo/ops.c (tool_comp_paths): don't crash if path list is empty (master) http://qi-hw.com/p/cae-tools/44d58a5 | 23:32 |
qi-bot | [commit] Werner Almesberger: cameo/gerber.c: crudely support some cases of G03 (master) http://qi-hw.com/p/cae-tools/7aaaf86 | 23:32 |
qi-bot | [commit] Werner Almesberger: modules/tswa.fpd: add more measurements (master) http://qi-hw.com/p/kicad-libs/4e10389 | 23:33 |
qi-bot | [commit] Paul Cercueil: Disable inotify support if libopk is not found (packages) http://qi-hw.com/p/gmenu2x/0ee45d5 | 15:29 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Fix build for platforms without libopk (packages) http://qi-hw.com/p/gmenu2x/6947997 | 15:29 |
qi-bot | [commit] Maarten ter Huurne: Removed checks for manuals and screenshots in JPEG and BMP format (master) http://qi-hw.com/p/gmenu2x/8472acc | 15:39 |
qi-bot | [commit] Maarten ter Huurne: Check for empty strings using empty() instead of comparing to "" (master) http://qi-hw.com/p/gmenu2x/6c80a66 | 15:39 |
qi-bot | [commit] Maarten ter Huurne: Eliminated selectedDir argument to LinkApp::launch() (master) http://qi-hw.com/p/gmenu2x/d6deb29 | 15:39 |
qi-bot | [commit] Maarten ter Huurne: Pass full path to LinkApp::launch (master) http://qi-hw.com/p/gmenu2x/8d38dec | 15:39 |
qi-bot | [commit] Maarten ter Huurne: Fixed bug with launch screen and double buffering (master) http://qi-hw.com/p/gmenu2x/965340a | 15:39 |
qi-bot | [commit] Paul Cercueil: Also search the Default skin in the user directory for skin files (master) http://qi-hw.com/p/gmenu2x/3ff6dc9 | 15:39 |
qi-bot | [commit] Paul Cercueil: Code factorisation (Add function inject_user_event() to utilities) (master) http://qi-hw.com/p/gmenu2x/5d8fb65 | 15:39 |
qi-bot | [commit] Paul Cercueil: When started, load all OPKs in a thread to boost startup time (master) http://qi-hw.com/p/gmenu2x/5c631d6 | 15:39 |
qi-bot | [commit] Paul Cercueil: Revert "When started, load all OPKs in a thread to boost startup time" (master) http://qi-hw.com/p/gmenu2x/5eb8fb7 | 15:39 |
qi-bot | [commit] Paul Cercueil: Allow exiting the selector with B when not in explorer mode (master) http://qi-hw.com/p/gmenu2x/20339c8 | 15:39 |
qi-bot | [commit] Paul Cercueil: Add function GMenu2X::getTouchscreen(), to simplify Link and LinkApp prototypes (master) http://qi-hw.com/p/gmenu2x/1ff17d8 | 15:39 |
qi-bot | [commit] Paul Cercueil: Simplify again the prototype of LinkApp as gmenu2x->input is public (master) http://qi-hw.com/p/gmenu2x/b733914 | 15:39 |
qi-bot | [commit] Paul Cercueil: Make the Selector return the canonicalised absolute pathname (master) http://qi-hw.com/p/gmenu2x/ba5ef51 | 15:39 |
qi-bot | [commit] Paul Cercueil: Change API of InputManager: we don't care about key release events (master) http://qi-hw.com/p/gmenu2x/dba6c32 | 15:39 |
qi-bot | [commit] Paul Cercueil: Make the InputManager handle analog sticks as input (master) http://qi-hw.com/p/gmenu2x/3ce314c | 15:39 |
qi-bot | [commit] Paul Cercueil: Fixes the Selector returning empty file/directory names (master) http://qi-hw.com/p/gmenu2x/e86a96c | 15:39 |
qi-bot | [commit] Paul Cercueil: Recover last session from main() instead of constructor (master) http://qi-hw.com/p/gmenu2x/0e41804 | 15:39 |
qi-bot | [commit] Paul Cercueil: Disable inotify support if libopk is not found (master) http://qi-hw.com/p/gmenu2x/0ee45d5 | 15:39 |
qi-bot | [commit] Paul Cercueil: Fix build for platforms without libopk (master) http://qi-hw.com/p/gmenu2x/6947997 | 15:39 |
qi-bot | [commit] Paul Cercueil: Merge branch 'packages' (master) http://qi-hw.com/p/gmenu2x/f99c5ee | 15:39 |
qi-bot | [commit] Werner Almesberger: modules/tswa.fpd: add hole to through-hole pads (master) http://qi-hw.com/p/kicad-libs/a808cc1 | 00:44 |
---|---|---|
qi-bot | [commit] Werner Almesberger: modules/stdpass.fpd: add 1008 (for Samsung CIG22L4R7MNE inductor) (master) http://qi-hw.com/p/kicad-libs/2cf146c | 00:44 |
qi-bot | [commit] Werner Almesberger: components/aat1217.lib: Skyworks AAT1217 step-up converter (master) http://qi-hw.com/p/kicad-libs/dc5ce7a | 00:44 |
qi-bot | [commit] Werner Almesberger: modules/sot.fpd: add 236 (23-6) footprint (master) http://qi-hw.com/p/kicad-libs/784f0e6 | 00:44 |
qi-bot | [commit] Werner Almesberger: components/er-oled-fpc30.lib: change pin 30 from NC to GND (master) http://qi-hw.com/p/kicad-libs/c5278c5 | 09:58 |
qi-bot | [commit] Werner Almesberger: add C&K JS102011SAQN SPDT SMT switch (symbol and footprint) (master) http://qi-hw.com/p/kicad-libs/18ed84d | 09:58 |
qi-bot | [commit] Werner Almesberger: components/kl25-48.lib: add pin 49 for the center pad (master) http://qi-hw.com/p/kicad-libs/b32bd32 | 09:58 |
qi-bot | [commit] Werner Almesberger: modules/qfn.fpd: add QFN48-Freescale for KL25 chips (draft) (master) http://qi-hw.com/p/kicad-libs/e8e6813 | 18:47 |
---|---|---|
qi-bot | [commit] Werner Almesberger: components/: add Freescale Kinetis KL25 in 48 pin package (master) http://qi-hw.com/p/kicad-libs/38cb8de | 18:47 |
qi-bot | [commit] Werner Almesberger: add EastRising OLED FPC-30 connector (symbol and footprint) (master) http://qi-hw.com/p/kicad-libs/2c26373 | 18:47 |
qi-bot | [commit] Werner Almesberger: components/memcard8.lib: add MEMCARD8-SHIELD3-SW1 for Amphenol 10100660 (master) http://qi-hw.com/p/kicad-libs/4a9b06e | 18:47 |
qi-bot | [commit] Werner Almesberger: modules/memcard8-amp-10100660.fpd: Amphenol 10100660 footprint (draft) (master) http://qi-hw.com/p/kicad-libs/81c2a48 | 18:47 |
qi-bot | [commit] Werner Almesberger: flip er-oled-fpc30.fpd; add new footprints to Makefile; fix comp ref in kl25-48.lib (master) http://qi-hw.com/p/kicad-libs/2aa3233 | 18:47 |
qi-bot | [commit] Werner Almesberger: add C&K TSWA series switch with 22 mm wheel (master) http://qi-hw.com/p/kicad-libs/3f1b978 | 19:19 |
qi-bot | [commit] Werner Almesberger: HIERARCHY: change QFN32-Freescale to QFN48-Freescale (master) http://qi-hw.com/p/kicad-libs/a6aca6e | 19:19 |
qi-bot | [commit] Werner Almesberger: dsv/dsv: sent User-Agent to "dsv/1.0" (instead of Wget/...) (master) http://qi-hw.com/p/eda-tools/3256b03 | 15:01 |
---|
qi-bot | [commit] Paul Cercueil: Change API of InputManager: we don't care about key release events (packages) http://qi-hw.com/p/gmenu2x/dba6c32 | 15:13 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Make the InputManager handle analog sticks as input (packages) http://qi-hw.com/p/gmenu2x/3ce314c | 15:13 |
qi-bot | [commit] Paul Cercueil: Fixes the Selector returning empty file/directory names (packages) http://qi-hw.com/p/gmenu2x/e86a96c | 21:06 |
qi-bot | [commit] Paul Cercueil: Recover last session from main() instead of constructor (packages) http://qi-hw.com/p/gmenu2x/0e41804 | 21:06 |
qi-bot | [commit] Paul Cercueil: Allow exiting the selector with B when not in explorer mode (packages) http://qi-hw.com/p/gmenu2x/20339c8 | 23:26 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Add function GMenu2X::getTouchscreen(), to simplify Link and LinkApp prototypes (packages) http://qi-hw.com/p/gmenu2x/1ff17d8 | 23:26 |
qi-bot | [commit] Paul Cercueil: Simplify again the prototype of LinkApp as gmenu2x->input is public (packages) http://qi-hw.com/p/gmenu2x/b733914 | 23:26 |
qi-bot | [commit] Paul Cercueil: Make the Selector return the canonicalised absolute pathname (packages) http://qi-hw.com/p/gmenu2x/ba5ef51 | 23:26 |
qi-bot | [commit] Werner Almesberger: ircstat/ML: update for 7/2013 and 8/2013 (master) http://qi-hw.com/p/wernermisc/61a999a | 04:48 |
---|
qi-bot | [commit] Paul Cercueil: Also search the Default skin in the user directory for skin files (packages) http://qi-hw.com/p/gmenu2x/3ff6dc9 | 15:36 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Code factorisation (Add function inject_user_event() to utilities) (packages) http://qi-hw.com/p/gmenu2x/5d8fb65 | 17:27 |
qi-bot | [commit] Paul Cercueil: When started, load all OPKs in a thread to boost startup time (packages) http://qi-hw.com/p/gmenu2x/5c631d6 | 17:27 |
qi-bot | [commit] Paul Cercueil: Revert "When started, load all OPKs in a thread to boost startup time" (packages) http://qi-hw.com/p/gmenu2x/5eb8fb7 | 17:52 |
qi-bot | [commit] Maarten ter Huurne: Check for empty strings using empty() instead of comparing to "" (packages) http://qi-hw.com/p/gmenu2x/6c80a66 | 14:02 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: Eliminated selectedDir argument to LinkApp::launch() (packages) http://qi-hw.com/p/gmenu2x/d6deb29 | 14:02 |
qi-bot | [commit] Maarten ter Huurne: Pass full path to LinkApp::launch (packages) http://qi-hw.com/p/gmenu2x/8d38dec | 14:02 |
qi-bot | [commit] Maarten ter Huurne: Fixed bug with launch screen and double buffering (packages) http://qi-hw.com/p/gmenu2x/965340a | 14:02 |
qi-bot | [commit] Maarten ter Huurne: Query animation status instead of storing it (packages) http://qi-hw.com/p/gmenu2x/90afa09 | 02:32 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: Make ButtonBox deal with IconButtons instead of generic Buttons (packages) http://qi-hw.com/p/gmenu2x/06ee35b | 02:32 |
qi-bot | [commit] Maarten ter Huurne: Make Link and IconButton inherit from Button privately (packages) http://qi-hw.com/p/gmenu2x/6378fcf | 02:32 |
qi-bot | [commit] Maarten ter Huurne: Removed Button class (packages) http://qi-hw.com/p/gmenu2x/742444c | 02:32 |
qi-bot | [commit] Maarten ter Huurne: Removed the word "Color" from the labels in the skin settings menu (packages) http://qi-hw.com/p/gmenu2x/dfa5413 | 14:58 |
qi-bot | [commit] Maarten ter Huurne: Remove "don't leave" feature (packages) http://qi-hw.com/p/gmenu2x/9c497e7 | 14:58 |
qi-bot | [commit] Maarten ter Huurne: Reduce use of HAVE_LIBOPK inside LinkApp class as well (packages) http://qi-hw.com/p/gmenu2x/ea85b10 | 14:58 |
qi-bot | [commit] Maarten ter Huurne: Don't pass screen coordinates to drawScrollBar() (packages) http://qi-hw.com/p/gmenu2x/b18e3fa | 14:58 |
qi-bot | [commit] Maarten ter Huurne: Make GMenu2X::initBG() private (packages) http://qi-hw.com/p/gmenu2x/69b2b79 | 14:58 |
qi-bot | [commit] Maarten ter Huurne: Made Surface argument to drawTopBar/drawBottomBar() mandatory (packages) http://qi-hw.com/p/gmenu2x/1ffae36 | 14:58 |
qi-bot | [commit] Maarten ter Huurne: Removed PNG font (packages) http://qi-hw.com/p/gmenu2x/e4dd070 | 14:58 |
qi-bot | [commit] Maarten ter Huurne: Crop 320x240 versions of topbar.png and bottombar.png to width 320 (packages) http://qi-hw.com/p/gmenu2x/13f91f9 | 14:58 |
qi-bot | [commit] Maarten ter Huurne: Added "bottomBarHeight" item to skin (packages) http://qi-hw.com/p/gmenu2x/19fc3cb | 14:58 |
qi-bot | [commit] Maarten ter Huurne: Added method GMenu2X::getContentArea() (packages) http://qi-hw.com/p/gmenu2x/91dd708 | 14:58 |
qi-bot | [commit] Maarten ter Huurne: Fixed text area coordinates in TextDialog (packages) http://qi-hw.com/p/gmenu2x/666be4d | 14:58 |
qi-bot | [commit] Maarten ter Huurne: Removed checks for manuals and screenshots in JPEG and BMP format (packages) http://qi-hw.com/p/gmenu2x/8472acc | 14:58 |
qi-bot | [commit] Maarten ter Huurne: Renamed section left/right images (packages) http://qi-hw.com/p/gmenu2x/02dd542 | 04:27 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: Made Link/LinkApp::searchIcon() protected (instead of public) (packages) http://qi-hw.com/p/gmenu2x/0d0eebe | 04:27 |
qi-bot | [commit] Maarten ter Huurne: Minor cleanups in Menu::linkUp/Down() and setLinkIndex() (packages) http://qi-hw.com/p/gmenu2x/6cdd569 | 04:27 |
qi-bot | [commit] Maarten ter Huurne: Scroll when link cursor moves into top/bottom row (packages) http://qi-hw.com/p/gmenu2x/f820bf8 | 04:27 |
qi-bot | [commit] Maarten ter Huurne: Declare Surface methods that don't change the surface as "const" (packages) http://qi-hw.com/p/gmenu2x/b0d1d9e | 03:17 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: Put background painting and global keys in new Background layer (packages) http://qi-hw.com/p/gmenu2x/3460678 | 03:17 |
qi-bot | [commit] Maarten ter Huurne: Set initial key repeat delay to a more sensible value (packages) http://qi-hw.com/p/gmenu2x/3f299f6 | 03:17 |
qi-bot | [commit] Maarten ter Huurne: Moved all code for opening the context menu into the Menu class (packages) http://qi-hw.com/p/gmenu2x/71f4391 | 03:17 |
qi-bot | [commit] Maarten ter Huurne: Allow layers to play animations (packages) http://qi-hw.com/p/gmenu2x/f414ce4 | 03:17 |
qi-bot | [commit] Maarten ter Huurne: Animate section header changes (packages) http://qi-hw.com/p/gmenu2x/8de59b5 | 03:17 |
qi-bot | [commit] Maarten ter Huurne: Cleaned up GMenu2X::contextMenu() (packages) http://qi-hw.com/p/gmenu2x/945e299 | 22:34 |
qi-bot | [commit] Maarten ter Huurne: Converted the context menu to a Layer (packages) http://qi-hw.com/p/gmenu2x/7611766 | 22:34 |
qi-bot | [commit] Maarten ter Huurne: Implemented wrap around for context menu option selection (packages) http://qi-hw.com/p/gmenu2x/84fe36b | 22:34 |
qi-bot | [commit] Maarten ter Huurne: Call Menu::selLinkApp() only once in GMenu2X::editLink() (packages) http://qi-hw.com/p/gmenu2x/271ef00 | 22:34 |
qi-bot | [commit] Maarten ter Huurne: Define LinkApp::isOpk() also when OPK support is disabled (packages) http://qi-hw.com/p/gmenu2x/de30b3f | 22:34 |
qi-bot | [commit] Maarten ter Huurne: Use reference to SurfaceCollection in Menu::paint() (packages) http://qi-hw.com/p/gmenu2x/4a392a9 | 02:10 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: Call Menu::skinUpdated() earlier in initMenu() (packages) http://qi-hw.com/p/gmenu2x/f71ea3b | 02:10 |
qi-bot | [commit] Maarten ter Huurne: Cleanups of Clock class (packages) http://qi-hw.com/p/gmenu2x/a15339d | 02:10 |
qi-bot | [commit] Maarten ter Huurne: Made Clock simpler and more reliable (packages) http://qi-hw.com/p/gmenu2x/9158b90 | 02:10 |
qi-bot | [commit] Maarten ter Huurne: Made Clock destruction safe (packages) http://qi-hw.com/p/gmenu2x/9e1f717 | 02:10 |
qi-bot | [commit] Maarten ter Huurne: Clock: Update current time atomically (packages) http://qi-hw.com/p/gmenu2x/4662603 | 02:10 |
qi-bot | [commit] Maarten ter Huurne: Changed section headers to be displayed in a circular fashion (packages) http://qi-hw.com/p/gmenu2x/e6300ab | 01:00 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: Removed InputManager::waitForReleasedButton() (packages) http://qi-hw.com/p/gmenu2x/d588b97 | 01:00 |
qi-bot | [commit] Maarten ter Huurne: Handle menu-related buttons inside Menu class (packages) http://qi-hw.com/p/gmenu2x/0746683 | 01:00 |
qi-bot | [commit] Maarten ter Huurne: Implemented layer system for painting and events (packages) http://qi-hw.com/p/gmenu2x/6d868a8 | 01:00 |
qi-bot | [commit] Maarten ter Huurne: Use shared_ptr for layers (packages) http://qi-hw.com/p/gmenu2x/63029d8 | 01:00 |
qi-bot | [commit] Werner Almesberger: cameo/templates/mkmk-simple: support new edge file names (master) http://qi-hw.com/p/cae-tools/b8c9278 | 22:19 |
qi-bot | [commit] Maarten ter Huurne: Moved menu painting code into Menu class (packages) http://qi-hw.com/p/gmenu2x/1eeba17 | 00:11 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: Moved menu touch handling code into Menu class (packages) http://qi-hw.com/p/gmenu2x/41b0551 | 00:11 |
qi-bot | [commit] Maarten ter Huurne: Fixed scrollbar size for links area (packages) http://qi-hw.com/p/gmenu2x/f65a59a | 00:11 |
qi-bot | [commit] Maarten ter Huurne: Center links horizontally (packages) http://qi-hw.com/p/gmenu2x/8d7ac6e | 00:11 |
qi-bot | [commit] Maarten ter Huurne: Moved linkColumns and linkRows fields into Menu class (packages) http://qi-hw.com/p/gmenu2x/bdf3cfd | 00:11 |
qi-bot | [commit] Maarten ter Huurne: Made L/R button images of the Default skin match the topBarHeight (packages) http://qi-hw.com/p/gmenu2x/d46d827 | 00:11 |
qi-bot | [commit] Maarten ter Huurne: Switch from mega to giga when showing large disk/card sizes (packages) http://qi-hw.com/p/gmenu2x/903ccc2 | 00:11 |
qi-bot | [commit] Maarten ter Huurne: The "tr1" namespace is no longer needed now that we're on C++11 (packages) http://qi-hw.com/p/gmenu2x/fb8f4e6 | 02:15 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: Do not draw NULL icon (packages) http://qi-hw.com/p/gmenu2x/dd55b72 | 02:15 |
qi-bot | [commit] Maarten ter Huurne: Restrict access to Link::recalcCoordinates() (packages) http://qi-hw.com/p/gmenu2x/a7b3166 | 02:15 |
qi-bot | [commit] Maarten ter Huurne: Cleaned up Menu::loadIcons() (packages) http://qi-hw.com/p/gmenu2x/40372d1 | 02:15 |
qi-bot | [commit] Maarten ter Huurne: Moved most Menu::loadIcons() code into Link/LinkApp classes (packages) http://qi-hw.com/p/gmenu2x/a9b5d8b | 02:15 |
qi-bot | [commit] Maarten ter Huurne: Made ASFont::utf8Code() a function in inputdialog.cpp instead (packages) http://qi-hw.com/p/gmenu2x/0046fa9 | 02:15 |
qi-bot | [commit] Maarten ter Huurne: Renamed ASFont class to just Font (packages) http://qi-hw.com/p/gmenu2x/724aefe | 02:15 |
qi-bot | [commit] Maarten ter Huurne: Don't construct non-functional Font objects (packages) http://qi-hw.com/p/gmenu2x/f8dc4c7 | 02:15 |
qi-bot | [commit] Maarten ter Huurne: Put main loop painting code in separate methods (packages) http://qi-hw.com/p/gmenu2x/cbe7735 | 02:15 |
qi-bot | [commit] kyak: unrealircd: small fixes (master) http://qi-hw.com/p/openwrt-packages/d84538b | 12:48 |
---|
qi-bot | [commit] kyak: tre: initial commit (master) http://qi-hw.com/p/openwrt-packages/2d18f08 | 12:18 |
---|---|---|
qi-bot | [commit] kyak: unrealircd: initial commit (master) http://qi-hw.com/p/openwrt-packages/9b6e25c | 12:18 |
qi-bot | [commit] Paul Cercueil: Open all available joysticks (packages) http://qi-hw.com/p/gmenu2x/fcb2618 | 17:19 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Make sure the joystick subsystem is inited before InputManager starts (packages) http://qi-hw.com/p/gmenu2x/de9b3cd | 17:19 |
qi-bot | [commit] Werner Almesberger: tools/atrf-txrx/atrf-txrx.c: new option -q for quiet capture (buffer-frames) http://qi-hw.com/p/ben-wpan/d1b65cb | 23:17 |
---|---|---|
qi-bot | [commit] Werner Almesberger: atusb/fw/: add SPI block reception (buffer-frames) http://qi-hw.com/p/ben-wpan/7fd9044 | 23:17 |
qi-bot | [commit] Werner Almesberger: tools/lib/: aggressive polling for wait_for_interrupt, if timeout_ms = -1 (buffer-frames) http://qi-hw.com/p/ben-wpan/07b1da2 | 23:17 |
qi-bot | [commit] Werner Almesberger: tools/atrf-txrx/atrf-txrx.c: option -q becomes "quick" and uses aggressive polling (buffer-frames) http://qi-hw.com/p/ben-wpan/873f80c | 23:17 |
qi-bot | [commit] Werner Almesberger: atusb/fw/mac.c: remove queued_rx; buffer frames in the MCU instead (master) http://qi-hw.com/p/ben-wpan/b73d5fc | 23:38 |
qi-bot | [commit] Werner Almesberger: atusb/fw/mac.c (next_buf): dedicated function for incrementing buffer indices (master) http://qi-hw.com/p/ben-wpan/998ac7e | 23:38 |
qi-bot | [commit] Werner Almesberger: atusb/fw/Makefile: improve size reporting (show segment sizes) (master) http://qi-hw.com/p/ben-wpan/0706773 | 23:38 |
qi-bot | [commit] Werner Almesberger: tools/atrf-txrx/atrf-txrx.c: new option -q for quiet capture (master) http://qi-hw.com/p/ben-wpan/d1b65cb | 23:38 |
qi-bot | [commit] Werner Almesberger: atusb/fw/: add SPI block reception (master) http://qi-hw.com/p/ben-wpan/7fd9044 | 23:38 |
qi-bot | [commit] Werner Almesberger: tools/lib/: aggressive polling for wait_for_interrupt, if timeout_ms = -1 (master) http://qi-hw.com/p/ben-wpan/07b1da2 | 23:38 |
qi-bot | [commit] Werner Almesberger: tools/atrf-txrx/atrf-txrx.c: option -q becomes "quick" and uses aggressive polling (master) http://qi-hw.com/p/ben-wpan/873f80c | 23:38 |
qi-bot | [commit] Werner Almesberger: Merge branch 'buffer-frames' (master) http://qi-hw.com/p/ben-wpan/08f4ac9 | 23:38 |
qi-bot | [commit] Werner Almesberger: atusb/fw/mac.c (RX_BUFS): increase buffer size from 2 to 3 frames (master) http://qi-hw.com/p/ben-wpan/bf067b3 | 23:40 |
qi-bot | [commit] Paul Cercueil: Drop enum constants of unsupported button actions (packages) http://qi-hw.com/p/gmenu2x/152ed5c | 17:01 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Switched to C++11 (packages) http://qi-hw.com/p/gmenu2x/9951ab2 | 17:01 |
qi-bot | [commit] Paul Cercueil: Drop incredibly dirty and huge file FastDelegate.h (packages) http://qi-hw.com/p/gmenu2x/88f54e1 | 17:01 |
qi-bot | [commit] Paul Cercueil: Revert the log level to INFO (packages) http://qi-hw.com/p/gmenu2x/50b3bb2 | 17:04 |
qi-bot | [commit] Werner Almesberger: atusb/fw/mac.c: add section titles (master) http://qi-hw.com/p/ben-wpan/6416fa8 | 11:04 |
---|---|---|
qi-bot | [commit] Werner Almesberger: atusb/fw/mac.c (next_buf): dedicated function for incrementing buffer indices (buffer-frames) http://qi-hw.com/p/ben-wpan/998ac7e | 20:21 |
qi-bot | [commit] Werner Almesberger: atusb/fw/Makefile: improve size reporting (show segment sizes) (buffer-frames) http://qi-hw.com/p/ben-wpan/0706773 | 20:21 |
qi-bot | [commit] Werner Almesberger: atusb/fw/Makefile: improve size reporting (show segment sizes) (master) http://qi-hw.com/p/ben-wpan/a9d5028 | 20:21 |
qi-bot | [commit] Paul Cercueil: Use an enum instead of hardcoded values for the user-injected codes (packages) http://qi-hw.com/p/gmenu2x/b0fa6db | 03:56 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Added a clock on the bottom bar (packages) http://qi-hw.com/p/gmenu2x/47bbc0b | 03:56 |
qi-bot | [commit] Paul Cercueil: Initialize the timers subsystem of SDL at the beginning (packages) http://qi-hw.com/p/gmenu2x/e0109df | 04:24 |
qi-bot | [commit] Paul Cercueil: Clean translation files (set to Unix, remove trailing spaces...) (packages) http://qi-hw.com/p/gmenu2x/35c487a | 01:24 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Add an ISO 639-1 code at the top of each translation file (packages) http://qi-hw.com/p/gmenu2x/9f29618 | 01:24 |
qi-bot | [commit] Paul Cercueil: Load the localized title and description of an OPK if available (packages) http://qi-hw.com/p/gmenu2x/a682d10 | 01:24 |
qi-bot | [commit] Paul Cercueil: Make the file selector accept all files by default (packages) http://qi-hw.com/p/gmenu2x/a0515ad | 19:46 |
qi-bot | [commit] Paul Cercueil: Fix link insertion/deletion when OPKs are overwritten from SSH/FTP (packages) http://qi-hw.com/p/gmenu2x/cc869c0 | 02:44 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Prepare the Monitor class for proper inheritance (packages) http://qi-hw.com/p/gmenu2x/f308ed9 | 02:44 |
qi-bot | [commit] Paul Cercueil: Remove all links of an "apps" dir when it is removed or renamed (packages) http://qi-hw.com/p/gmenu2x/5e7bcf3 | 02:44 |
qi-bot | [commit] Paul Cercueil: Start inotify with working mask (fixes previous commit) (packages) http://qi-hw.com/p/gmenu2x/0264b72 | 18:39 |
qi-bot | [commit] Paul Cercueil: Remove trailing slash from CARD_ROOT (packages) http://qi-hw.com/p/gmenu2x/04d9d93 | 18:39 |
qi-bot | [commit] Paul Cercueil: Don't try to read OPKs in /media/./apps and /media/../apps (packages) http://qi-hw.com/p/gmenu2x/36c4205 | 18:39 |
qi-bot | [commit] Paul Cercueil: Add function openPackagesFromDir() to simplify constructor of Menu (packages) http://qi-hw.com/p/gmenu2x/69b9657 | 18:39 |
qi-bot | [commit] Paul Cercueil: Add a MediaMonitor, which will watch CARD_ROOT for mountpoints (packages) http://qi-hw.com/p/gmenu2x/41e4cff | 18:39 |
qi-bot | [commit] Paul Cercueil: When loading multiple OPKs, don't order links each time one is added (packages) http://qi-hw.com/p/gmenu2x/84a987e | 18:39 |
qi-bot | [commit] Paul Cercueil: Use sigaction() instead of deprecated function signal() (packages) http://qi-hw.com/p/gmenu2x/d5280eb | 18:39 |
qi-bot | [commit] Paul Cercueil: Exit the thread properly in the destructor of Monitor objects (packages) http://qi-hw.com/p/gmenu2x/ebce540 | 18:39 |
qi-bot | [commit] Paul Cercueil: Stop watching a directory when it has been reported as removed (packages) http://qi-hw.com/p/gmenu2x/b6dfdc6 | 18:39 |
qi-bot | [commit] Paul Cercueil: Accept meta-data named *.all.desktop in OPK files (packages) http://qi-hw.com/p/gmenu2x/9dae4b7 | 18:46 |
qi-bot | [commit] Paul Cercueil: Destroy all registered Monitor objects when the Menu is destroyed (packages) http://qi-hw.com/p/gmenu2x/5255bf6 | 18:52 |
qi-bot | [commit] Paul Cercueil: Don't prepend the mounpoint to the binary path if not inside the OPK (packages) http://qi-hw.com/p/gmenu2x/bec8d87 | 19:28 |
qi-bot | [commit] Paul Cercueil: Remove all links of an OPK when moved out of the monitored folder (packages) http://qi-hw.com/p/gmenu2x/dfad7c3 | 21:17 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Fix the function that sets the icon of a Link (packages) http://qi-hw.com/p/gmenu2x/504641a | 21:17 |
qi-bot | [commit] Paul Cercueil: Change the "GMenu2X starting" message (packages) http://qi-hw.com/p/gmenu2x/32d100e | 21:17 |
qi-bot | [commit] Paul Cercueil: Fix translations in user directory not correctly loaded (packages) http://qi-hw.com/p/gmenu2x/9029dec | 21:17 |
qi-bot | [commit] Paul Cercueil: Order the links in alphabetical order (packages) http://qi-hw.com/p/gmenu2x/bcb3e98 | 21:40 |
qi-bot | [commit] Paul Cercueil: Allow an OPK to use an icon provided by the theme (packages) http://qi-hw.com/p/gmenu2x/91f381f | 21:53 |
qi-bot | [commit] Paul Cercueil: Split huge function readPackages into two functions (packages) http://qi-hw.com/p/gmenu2x/78ad051 | 17:39 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Don't try to find OPKs inside non-existing directories (packages) http://qi-hw.com/p/gmenu2x/1467c9b | 17:39 |
qi-bot | [commit] Paul Cercueil: Monitor OPK folders using inotify and automatically add/delete links (packages) http://qi-hw.com/p/gmenu2x/13b3d8e | 17:39 |
qi-bot | [commit] Werner Almesberger: bin/snmp6: monitor IPv6 statistics in /proc/net/snmp6 (master) http://qi-hw.com/p/wernermisc/b993423 | 03:51 |
---|
qi-bot | [commit] Paul Cercueil: Use the "*" filter to match all files (packages) http://qi-hw.com/p/gmenu2x/6d44fb3 | 06:27 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Match all files by default in the file dialog (packages) http://qi-hw.com/p/gmenu2x/5790740 | 06:27 |
qi-bot | [commit] Paul Cercueil: Update file extension filter for manually added applications (packages) http://qi-hw.com/p/gmenu2x/aa8b21e | 06:27 |
qi-bot | [commit] Paul Cercueil: Add *.elf to the filter of the explorer and the "add link" dialog (packages) http://qi-hw.com/p/gmenu2x/e1968c3 | 06:31 |
qi-bot | [commit] Paul Cercueil: Match only *.png files for the application icon selector (packages) http://qi-hw.com/p/gmenu2x/ca811ea | 16:24 |
qi-bot | [commit] Paul Cercueil: Update filter of manual selection dialog to *.man.png *.txt (packages) http://qi-hw.com/p/gmenu2x/1337eb5 | 16:24 |
qi-bot | [commit] Paul Cercueil: Don't call tolower() on the whole filenames, only on extensions (packages) http://qi-hw.com/p/gmenu2x/eb63294 | 18:16 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Drop the bitmap font; use a TTF font instead (packages) http://qi-hw.com/p/gmenu2x/46386a2 | 18:16 |
qi-bot | [commit] Paul Cercueil: Fix extension filter in file selection dialog (packages) http://qi-hw.com/p/gmenu2x/dad8d1b | 18:51 |
qi-bot | [commit] Paul Cercueil: Fix extension filters of the Explorer (packages) http://qi-hw.com/p/gmenu2x/3558dfb | 18:51 |
qi-bot | [commit] Paul Cercueil: Fix extension filter of the wallpaper dialog (packages) http://qi-hw.com/p/gmenu2x/4ed21f2 | 21:10 |
qi-bot | [commit] Paul Cercueil: Remove the "unlock VT" feature; it has been moved to its own program (packages) http://qi-hw.com/p/gmenu2x/9737810 | 21:55 |
qi-bot | [commit] Paul Cercueil: Fix build on 64-bit systems (packages) http://qi-hw.com/p/gmenu2x/59a4566 | 03:19 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Fix build on 32-bit targets... (packages) http://qi-hw.com/p/gmenu2x/abc461b | 03:48 |
qi-bot | [commit] Werner Almesberger: ircstat/: update for 6/2013; Milkymist mailing list URL change (master) http://qi-hw.com/p/wernermisc/0153edd | 13:56 |
---|
qi-bot | [commit] Xiangfu: add jtag-serial cable, xc3slx16 ucf patches (master) http://qi-hw.com/p/openwrt-packages/8dc9141 | 18:03 |
---|
qi-bot | [commit] Xiangfu: xc3sprog: more work. add cmake (master) http://qi-hw.com/p/openwrt-packages/463b853 | 10:03 |
---|
qi-bot | [commit] Werner Almesberger: tools/atrf-txrx/atrf-txrx.c (usage): separate all sections by blank line (master) http://qi-hw.com/p/ben-wpan/bb6acf1 | 05:05 |
---|---|---|
qi-bot | [commit] Werner Almesberger: tools/atrf-txrx/atrf-txrx.c: new option -x to interpret messages as hex strings (master) http://qi-hw.com/p/ben-wpan/a523e8d | 05:05 |
qi-bot | [commit] Werner Almesberger: tools/atrf-txrx/atrf-txrx.c: use -x also on reception, to output message in hex (master) http://qi-hw.com/p/ben-wpan/172208e | 05:05 |
qi-bot | [commit] Werner Almesberger: neocon/neocon.c (make_raw): restore accidently deleted cfmakeraw (master) http://qi-hw.com/p/wernermisc/16a5d92 | 22:09 |
qi-bot | [commit] Xiangfu: add xc3sprog (master) http://qi-hw.com/p/openwrt-packages/d729c9c | 13:44 |
---|---|---|
qi-bot | [commit] Werner Almesberger: neocon/neocon.c (bps_tab): add support for 57600 bps (master) http://qi-hw.com/p/wernermisc/8b40af7 | 22:20 |
qi-bot | [commit] Werner Almesberger: neocon/neocon.c: new option -L for local line editing (for Contiki) (master) http://qi-hw.com/p/wernermisc/412d605 | 22:20 |
qi-bot | [commit] Paul Cercueil: Align the links the same way whether or not a scrollbar is present (packages) http://qi-hw.com/p/gmenu2x/4347c34 | 00:56 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Remove useless clipper (packages) http://qi-hw.com/p/gmenu2x/a0690ba | 00:56 |
qi-bot | [commit] Werner Almesberger: ircstat/ML: update for 5/2013 (master) http://qi-hw.com/p/wernermisc/2b7b70c | 13:52 |
---|
qi-bot | [commit] Paul Cercueil: Update GMenu2X to use the latest libopk v1.0 API (packages) http://qi-hw.com/p/gmenu2x/c58b3a5 | 23:12 |
---|
qi-bot | [commit] Bas Wijnen: new directory organization (master) http://qi-hw.com/p/iris/fa021a8 | 22:30 |
---|
qi-bot | [commit] Bas Wijnen: Make it compile again; fixed poweroff problem (master) http://qi-hw.com/p/iris/b06e011 | 13:50 |
---|
qi-bot | [commit] Werner Almesberger: bin/grepchunk: process diff -u output and select/drop (-v) chunks like grep would (master) http://qi-hw.com/p/wernermisc/8ffb473 | 13:30 |
---|
qi-bot | [commit] Werner Almesberger: web/index.html: update Web page (including shop change from Tuxbrain to Pulster) (master) http://qi-hw.com/p/ben-wpan/570982c | 19:24 |
---|
qi-bot | [commit] Werner Almesberger: ircstat/ML: update for 4/2013 (master) http://qi-hw.com/p/wernermisc/c599312 | 17:06 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ircstat/stat, ircstat/mlstat: print month/year only every 4th month (master) http://qi-hw.com/p/wernermisc/0508e23 | 17:06 |
qi-bot | [commit] Werner Almesberger: atben/misc/mkpatches: script to generate mails for the ATBEN kernel patches (master) http://qi-hw.com/p/ben-wpan/54630e0 | 00:15 |
---|---|---|
qi-bot | [commit] Lars-Peter Clausen: ASoC: mmp-pcm: Allocate dma filter parameters on the stack (jz-3.9) http://qi-hw.com/p/qi-kernel/dc1fbaa | 07:26 |
qi-bot | [commit] Lars-Peter Clausen: ASoC: imx-pcm: Embed the imx_dma_data struct in the dma_params struct (jz-3.9) http://qi-hw.com/p/qi-kernel/b095949 | 07:26 |
qi-bot | [commit] Lars-Peter Clausen: ASoC: mxs: Embed the mxs_dma_data struct in the mxs_pcm_dma_params struct (jz-3.9) http://qi-hw.com/p/qi-kernel/0b4b338 | 07:26 |
qi-bot | [commit] Lars-Peter Clausen: ASoC: dmaengine-pcm: Remove snd_dmaengine_pcm_{set,get}_data (jz-3.9) http://qi-hw.com/p/qi-kernel/f8beb76 | 07:26 |
qi-bot | [commit] Lars-Peter Clausen: ASoC: Constify the 'driver' field of snd_soc_platform (jz-3.9) http://qi-hw.com/p/qi-kernel/6392060 | 07:26 |
qi-bot | [commit] Lars-Peter Clausen: ASoC: Constify the 'ops' field of snd_soc_platform_driver (jz-3.9) http://qi-hw.com/p/qi-kernel/ad18e26 | 07:26 |
qi-bot | [commit] Lars-Peter Clausen: ASoC: Add snd_soc_{add, remove}_platform (jz-3.9) http://qi-hw.com/p/qi-kernel/9529ae7 | 07:26 |
qi-bot | [commit] Sebastien Guiriec: ASoC: omap-mcpdm: Clean up with devm_* function (jz-3.9) http://qi-hw.com/p/qi-kernel/6342ce0 | 07:26 |
qi-bot | [commit] Sebastien Guiriec: ASoC: omap-dmic: Clean up with devm_request_and_ioremap (jz-3.9) http://qi-hw.com/p/qi-kernel/958f315 | 07:26 |
qi-bot | [commit] Peter Ujfalusi: ASoC: omap-mcpdm: Collect link direction configuration under a struct (jz-3.9) http://qi-hw.com/p/qi-kernel/49fbc86 | 07:26 |
qi-bot | [commit] Peter Ujfalusi: ASoC: omap-mcpdm: Fix for full duplex audio use case (jz-3.9) http://qi-hw.com/p/qi-kernel/f57f343 | 07:26 |
qi-bot | [commit] Peter Ujfalusi: ASoC: omap-mcpdm: Remove leftower define for IO address (jz-3.9) http://qi-hw.com/p/qi-kernel/d2b10bd | 07:26 |
qi-bot | [commit] Lars-Peter Clausen: ASoC: dmaengine_pcm: Setup device_fc in snd_hwparams_to_dma_slave_config (jz-3.9) http://qi-hw.com/p/qi-kernel/ff290ea | 07:26 |
qi-bot | [commit] Lars-Peter Clausen: ASoC: dmaengine-pcm: Add a common DAI DMA data struct (jz-3.9) http://qi-hw.com/p/qi-kernel/8b5cdb8 | 07:26 |
qi-bot | [commit] Lars-Peter Clausen: ASoC: omap: Use common DAI DMA data (jz-3.9) http://qi-hw.com/p/qi-kernel/f82953d | 07:26 |
qi-bot | [commit] Lars-Peter Clausen: ASoC: tegra: Use common DAI DMA data struct (jz-3.9) http://qi-hw.com/p/qi-kernel/478f3cc | 07:26 |
qi-bot | [commit] Lars-Peter Clausen: ASoC: fsl: Use common DAI DMA data struct (jz-3.9) http://qi-hw.com/p/qi-kernel/559dd5b | 07:26 |
qi-bot | [commit] Lars-Peter Clausen: ASoC: dmaengine-pcm: Make requesting the DMA channel at PCM open optional (jz-3.9) http://qi-hw.com/p/qi-kernel/e836ae0 | 07:26 |
qi-bot | [commit] Lars-Peter Clausen: ASoC: Add a generic dmaengine_pcm driver (jz-3.9) http://qi-hw.com/p/qi-kernel/50b7ce4 | 07:26 |
qi-bot | [commit] Lars-Peter Clausen: ASoC: dmaengine_pcm: Add support for compat platforms (jz-3.9) http://qi-hw.com/p/qi-kernel/69afb60 | 07:26 |
qi-bot | [commit] Werner Almesberger: atben/misc/atben-spi-performance.txt: SPI performance comparison (master) http://qi-hw.com/p/ben-wpan/ff9c7a8 | 22:58 |
---|---|---|
qi-bot | [commit] Werner Almesberger: atben-spi-performance.txt: clean up and describe role of referenced code (master) http://qi-hw.com/p/ben-wpan/ec6c09d | 23:08 |
qi-bot | [commit] Werner Almesberger: bin/fk: add option -u to force usbboot, even if SSH is/seems available (master) http://qi-hw.com/p/wernermisc/040911f | 23:03 |
---|
qi-bot | [commit] Paul Cercueil: Fix crash occuring when an unknown MIME type is specified in OPK (packages) http://qi-hw.com/p/gmenu2x/2cef732 | 17:26 |
---|
qi-bot | [commit] Paul Cercueil: gcw0: changed description of reboot link (packages) http://qi-hw.com/p/gmenu2x/ea6eb29 | 06:04 |
---|---|---|
qi-bot | [commit] Paul Cercueil: gcw0: Add official wallpapers (packages) http://qi-hw.com/p/gmenu2x/5ae44f1 | 15:50 |
qi-bot | [commit] Werner Almesberger: atusb/fw/: echo back TX ACK sequence number; don't panic if driver times out TX (master) http://qi-hw.com/p/ben-wpan/367c1ab | 02:19 |
---|
qi-bot | [commit] Werner Almesberger: fw/include/atusb/: move shared protocol definitions from ep0.h to atusb.h (master) http://qi-hw.com/p/ben-wpan/12d3401 | 08:57 |
---|---|---|
qi-bot | [commit] Werner Almesberger: atusb/fw/board.h: de-duplicate USB ID definitions (now originate from atusb.h) (master) http://qi-hw.com/p/ben-wpan/2d43876 | 08:57 |
qi-bot | [commit] Werner Almesberger: fw/include/atusb/ep0.h (USB_TYPE_VENDOR): avoid conflict with /usr/include/usb.h (master) http://qi-hw.com/p/ben-wpan/16dd767 | 09:00 |
qi-bot | [commit] Werner Almesberger: fw/include/atusb/ep0.h: protect also USB_DIR_IN and USB_DIR_OUT (master) http://qi-hw.com/p/ben-wpan/3e749c3 | 18:57 |
qi-bot | [commit] Werner Almesberger: atusb/fw/mac.c (handle_irq): only handle TRX_END; never fall back to seq ints (master) http://qi-hw.com/p/ben-wpan/60ee82b | 18:57 |
qi-bot | [commit] Werner Almesberger: atusb/fw/mac.c (handle_irq): move frame reception to separate function (master) http://qi-hw.com/p/ben-wpan/d76bdf6 | 18:57 |
qi-bot | [commit] Werner Almesberger: atusb/fw/include/atusb/usb-ids.h: remove (and adapt former users) (master) http://qi-hw.com/p/ben-wpan/dab0d18 | 18:57 |
qi-bot | [commit] Werner Almesberger: include/atusb/atusb.h: salvage cute explanation of 0x1540 from usb-ids.h (master) http://qi-hw.com/p/ben-wpan/ad70d7c | 18:57 |
qi-bot | [commit] Werner Almesberger: atusb/fw/mac.c: queue frame reception if USB is busy (master) http://qi-hw.com/p/ben-wpan/65722d4 | 18:57 |
qi-bot | [commit] Werner Almesberger: atusb/fw/usb/: enable MCU reset on USB bus reset after config selection (master) http://qi-hw.com/p/ben-wpan/9b2696b | 18:57 |
qi-bot | [commit] Werner Almesberger: ircstat/ML: update for 3/2013 (master) http://qi-hw.com/p/wernermisc/8eee093 | 20:23 |
qi-bot | [commit] kyak: libnl-3: initial commit (master) http://qi-hw.com/p/openwrt-packages/e360db6 | 08:03 |
---|---|---|
qi-bot | [commit] kyak: lowpan-tools: update to 0.3 (master) http://qi-hw.com/p/openwrt-packages/f18356c | 08:03 |
qi-bot | [commit] kyak: lowpan-tools: update to the latest git version (master) http://qi-hw.com/p/openwrt-packages/963a2b7 | 14:00 |
qi-bot | [commit] Werner Almesberger: BOOKSHELF: URL of MMST3904(SOT-323).PDF changed (master) http://qi-hw.com/p/ben-wpan/40c01c4 | 03:09 |
---|---|---|
qi-bot | [commit] Werner Almesberger: tools/: fix artf_at86rf23[01] (should be atrf...) typo (master) http://qi-hw.com/p/ben-wpan/1de233a | 03:09 |
qi-bot | [commit] Werner Almesberger: atusb/fw/mac.c (do_tx): pulse SLP_TR instead of sending TRX_CMD_TX_START (master) http://qi-hw.com/p/ben-wpan/5fc9575 | 18:20 |
qi-bot | [commit] Werner Almesberger: atusb/fw/mac.c: check CRC and auto-discard bad frames (master) http://qi-hw.com/p/ben-wpan/2112803 | 20:05 |
qi-bot | [commit] Werner Almesberger: tools/lib/misctxrx.c (set_power_step): set SPI_CMD_MODE to PHY_RSSI (master) http://qi-hw.com/p/ben-wpan/cd56612 | 20:05 |
qi-bot | [commit] Werner Almesberger: atusb/fw/mac.c (do_tx): add timeout for transition to TRX_STATUS_RX_[AACK_]ON (master) http://qi-hw.com/p/ben-wpan/c9ab070 | 22:22 |
qi-bot | [commit] Werner Almesberger: atusb/fw/: convert functions returning "int" to "bool" (master) http://qi-hw.com/p/ben-wpan/a8db238 | 22:22 |
qi-bot | [commit] Werner Almesberger: atusb/fw/: get rid of some more "int"s (master) http://qi-hw.com/p/ben-wpan/647f3c0 | 22:22 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/Makefile (LDLIBS): add -lpthread -ldl (master) http://qi-hw.com/p/ben-blinkenlights/1d78c01 | 23:36 |
qi-bot | [commit] Werner Almesberger: ben/TOOLCHAIN: toolchain installation cheat sheet (master) http://qi-hw.com/p/wernermisc/3bccc39 | 23:37 |
qi-bot | [commit] Xiangfu: cgmienr: add a webui, update to 2.10.5 (master) http://qi-hw.com/p/openwrt-packages/8b7a891 | 09:24 |
---|
qi-bot | [commit] Werner Almesberger: ircstat/ML: update for 2/2013 (master) http://qi-hw.com/p/wernermisc/9d784c2 | 16:44 |
---|
qi-bot | [commit] Werner Almesberger: atusb/fw/mac.c: always wait for stability before changing transceiver state (master) http://qi-hw.com/p/ben-wpan/de8bcc1 | 08:02 |
---|---|---|
qi-bot | [commit] Werner Almesberger: atusb/fw/mac.c (txing, queued_tx_ack): change from "int" to "bool" (master) http://qi-hw.com/p/ben-wpan/88c7e64 | 08:02 |
qi-bot | [commit] kyak: gmu: update to 0.9.1 (master) http://qi-hw.com/p/openwrt-packages/b731d34 | 11:15 |
---|
qi-bot | [commit] Werner Almesberger: README: replace obsolete hardware description with the hardware history (master) http://qi-hw.com/p/ben-wpan/1d069a1 | 04:39 |
---|---|---|
qi-bot | [commit] Werner Almesberger: tools/atrf-txrx/atrf-txrx.c (main): perform mode changes via function (master) http://qi-hw.com/p/ben-wpan/b24e3d4 | 04:39 |
qi-bot | [commit] Werner Almesberger: tools/lib/atusb-common.c (atusb_rx): fix confusing typo in comment (master) http://qi-hw.com/p/ben-wpan/125cc6a | 04:39 |
qi-bot | [commit] Werner Almesberger: tools/: add timeout_ms argument to atrf_rx (master) http://qi-hw.com/p/ben-wpan/8ac87a3 | 04:39 |
qi-bot | [commit] Werner Almesberger: tools/atrf-txrx/atrf-txrx.c: add section headers and update clkm comment (master) http://qi-hw.com/p/ben-wpan/8710be5 | 04:39 |
qi-bot | [commit] Werner Almesberger: tools/atrf-txrx/atrf-txrx.c (main): sort options alphabetically (master) http://qi-hw.com/p/ben-wpan/49ca503 | 04:39 |
qi-bot | [commit] Werner Almesberger: tools/atrf-txrx/atrf-txrx.c: new option -R for RTT measurement mode (master) http://qi-hw.com/p/ben-wpan/c19fccf | 04:39 |
qi-bot | [commit] Werner Almesberger: fw/mac.c (handle_irq): read REG_IRQ_STATUS also if we ignore the value (master) http://qi-hw.com/p/ben-wpan/911eb4d | 04:39 |
qi-bot | [commit] Werner Almesberger: tools/atrf-txrx/atrf-txrx.c: -R and -H can be combined for HardMAC RTT (master) http://qi-hw.com/p/ben-wpan/276613d | 04:39 |
qi-bot | [commit] Werner Almesberger: atusb/fw/: reset MAC state on ATUSB_RF_RESET (master) http://qi-hw.com/p/ben-wpan/852aaf1 | 13:45 |
qi-bot | [commit] Werner Almesberger: tools/atrf-txrx/atrf-txrx.c (rtt_master): start transition to RX_ON while sending (master) http://qi-hw.com/p/ben-wpan/945aa04 | 13:45 |
qi-bot | [commit] Xiangfu: nanonote: update daily build url (master) http://qi-hw.com/p/openwrt-packages/6b68c45 | 14:25 |
qi-bot | [commit] Xiangfu: debian: update changelog (master) http://qi-hw.com/p/xburst-tools/c11aff0 | 14:15 |
---|---|---|
qi-bot | [commit] Xiangfu: debian: update debian stuff version (master) http://qi-hw.com/p/xburst-tools/bcf6c4e | 14:15 |
qi-bot | [commit] Maarten ter Huurne: Updated code calling opk_extract_file(). (packages) http://qi-hw.com/p/gmenu2x/bcbedc8 | 18:06 |
---|
qi-bot | [commit] Xiangfu: fpgatools: split to 2 packages (master) http://qi-hw.com/p/openwrt-packages/fe93706 | 08:56 |
---|
qi-bot | [commit] Werner Almesberger: ircstat/ML: update for 1/2013 (master) http://qi-hw.com/p/wernermisc/886f29b | 04:51 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ircstat/mlstat: add 2013 (master) http://qi-hw.com/p/wernermisc/7d07976 | 04:54 |
qi-bot | [commit] Werner Almesberger: ubb-la/gui.c (gui): move position display to show_position; add position in samples (master) http://qi-hw.com/p/ben-blinkenlights/5b050b4 | 05:47 |
qi-bot | [commit] Werner Almesberger: ubb-la/gui.c: add user-defined zero reference (set/unset with space) (master) http://qi-hw.com/p/ben-blinkenlights/b99c814 | 05:47 |
qi-bot | [commit] Werner Almesberger: ubb-la/gui.c (pos_step): step one sample at maximum zoom (master) http://qi-hw.com/p/ben-blinkenlights/9cc0328 | 05:47 |
qi-bot | [commit] Werner Almesberger: ubb-la/gui.c (si_text): used fixed %7.3f format if we have 7 characters (master) http://qi-hw.com/p/ben-blinkenlights/60b3751 | 05:47 |
qi-bot | [commit] Werner Almesberger: ubb-la/README: briefly describe GUI use (master) http://qi-hw.com/p/ben-blinkenlights/0058175 | 15:30 |
qi-bot | [commit] Werner Almesberger: ubb-la/gui.c (gui_init): disable the cursor on the Ben (master) http://qi-hw.com/p/ben-blinkenlights/9c3caf2 | 15:30 |
qi-bot | [commit] Werner Almesberger: ubb-la/gui.c: move sample retrieval to new function get_sample (master) http://qi-hw.com/p/ben-blinkenlights/47e5859 | 15:30 |
qi-bot | [commit] Werner Almesberger: ubb-la/gui.c: Shift+Left/Right jumps "intelligently" to next change on any channel (master) http://qi-hw.com/p/ben-blinkenlights/aa1106e | 15:30 |
qi-bot | [commit] Werner Almesberger: ubb-la/gui.c: add horizontal panning (WIP) (master) http://qi-hw.com/p/ben-blinkenlights/c702fc0 | 01:09 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ubb-la/gui.c (gui_init): enable keyboard repeat (master) http://qi-hw.com/p/ben-blinkenlights/4fb2a8c | 01:09 |
qi-bot | [commit] Werner Almesberger: ubb-la/gui.c (gui): make panning zoom-dependent (2 samples at maximum zoom) (master) http://qi-hw.com/p/ben-blinkenlights/4351442 | 01:09 |
qi-bot | [commit] Werner Almesberger: ubb-la/Makefile: add SDL (may break "static") (master) http://qi-hw.com/p/ben-blinkenlights/65a8578 | 01:09 |
qi-bot | [commit] Werner Almesberger: ubb-la/try.c: run the GUI with fake data (master) http://qi-hw.com/p/ben-blinkenlights/2d49a73 | 01:09 |
qi-bot | [commit] Werner Almesberger: ubb-la/gui.c (DEBUG): make debugging fprintfs optional via DEBUG macro (master) http://qi-hw.com/p/ben-blinkenlights/533e964 | 01:09 |
qi-bot | [commit] Werner Almesberger: ubb-la/gui.c: add section titles and reorder some of the functions (master) http://qi-hw.com/p/ben-blinkenlights/0925b0f | 01:09 |
qi-bot | [commit] Werner Almesberger: ubb-la/ubb-la.c: new option -g to use the GUI to display results (master) http://qi-hw.com/p/ben-blinkenlights/444e081 | 01:09 |
qi-bot | [commit] Werner Almesberger: ubb-la/gui.c: label channels (master) http://qi-hw.com/p/ben-blinkenlights/f99b626 | 04:24 |
qi-bot | [commit] Werner Almesberger: ubb-la/gui.c: display a small map of buffer and view (master) http://qi-hw.com/p/ben-blinkenlights/e1be0f2 | 04:24 |
qi-bot | [commit] Werner Almesberger: ubb-la/: display sample rate and sample interval in the GUI (master) http://qi-hw.com/p/ben-blinkenlights/5bb086e | 04:24 |
qi-bot | [commit] Werner Almesberger: ubb-la/gui.c: show horizontal divisions (master) http://qi-hw.com/p/ben-blinkenlights/acd9fd6 | 04:24 |
qi-bot | [commit] Werner Almesberger: ubb-la/gui.c (XWIDTH): move view width into macro instead of open-coding it (master) http://qi-hw.com/p/ben-blinkenlights/8d81b58 | 04:24 |
qi-bot | [commit] Werner Almesberger: ubb-la/gui.c: show division size (in samples and seconds) (master) http://qi-hw.com/p/ben-blinkenlights/cdcfb6c | 04:24 |
qi-bot | [commit] Werner Almesberger: ubb-la/gui.c (textf): vasprintf ain't alloca, so we need to free() (master) http://qi-hw.com/p/ben-blinkenlights/52c3dcc | 04:48 |
qi-bot | [commit] Werner Almesberger: ubb-la/gui.c (textf): use vsnprintf+valloca instead of vasprintf (master) http://qi-hw.com/p/ben-blinkenlights/06c5f6b | 06:00 |
qi-bot | [commit] Werner Almesberger: ubb-la.c/gui.c: show units in light blue to better separate them from numbers (master) http://qi-hw.com/p/ben-blinkenlights/159a128 | 06:00 |
qi-bot | [commit] Werner Almesberger: ubb-la/gui.c: add section comments for color and layout definitions (master) http://qi-hw.com/p/ben-blinkenlights/ba033cc | 06:00 |
qi-bot | [commit] Werner Almesberger: ubb-la/gui.c: add small gap (UNIT_GAP) between numbers and units (master) http://qi-hw.com/p/ben-blinkenlights/a83d8bf | 17:48 |
qi-bot | [commit] Werner Almesberger: ubb-la/gui.c: mark the center of the view area (master) http://qi-hw.com/p/ben-blinkenlights/b0a576d | 17:48 |
qi-bot | [commit] Werner Almesberger: ubb-la/gui.c: display time of center (from start of buffer) (master) http://qi-hw.com/p/ben-blinkenlights/db133f2 | 17:48 |
qi-bot | [commit] Werner Almesberger: ubb-la/gui.c (show_map): keep view rectangle size constant (master) http://qi-hw.com/p/ben-blinkenlights/f26fd35 | 17:48 |
qi-bot | [commit] Werner Almesberger: ubb-la/try.c (main): use same buffer size and offset as the Ben (master) http://qi-hw.com/p/ben-blinkenlights/af3c18a | 17:48 |
qi-bot | [commit] Werner Almesberger: ubb-la/gui.c: make debug output clearer and more detailed (master) http://qi-hw.com/p/ben-blinkenlights/8b69d26 | 17:48 |
qi-bot | [commit] Werner Almesberger: ubb-la/gui.c (show_buffer): fix calculation of the position offset (dp) (master) http://qi-hw.com/p/ben-blinkenlights/137ed18 | 17:48 |
qi-bot | [commit] Werner Almesberger: ubb-la/gui.c (show_map): fix calculation of middle point (master) http://qi-hw.com/p/ben-blinkenlights/709506e | 17:48 |
qi-bot | [commit] Werner Almesberger: ubb-la/gui.c (gui): the upper bound for "pos" is nibbles-skip-1, not "nibbles" (master) http://qi-hw.com/p/ben-blinkenlights/f9b3c36 | 17:48 |
qi-bot | [commit] Werner Almesberger: prod/doc/figfilt: script to filter portions of a FIG file based on keys in comments (master) http://qi-hw.com/p/ben-wpan/5733b60 | 13:23 |
---|---|---|
qi-bot | [commit] Werner Almesberger: prod/doc/Makefile: add missing dependencies on at{ben,usb}-{front,back}.png (master) http://qi-hw.com/p/ben-wpan/3800125 | 13:23 |
qi-bot | [commit] Werner Almesberger: prod/doc/test.hmac: fix unterminated IMG tag (master) http://qi-hw.com/p/ben-wpan/ee870b5 | 13:23 |
qi-bot | [commit] Werner Almesberger: ubb-la/ubb-la.c: raise MMC bus clock to 84 MHz during overhead (master) http://qi-hw.com/p/ben-blinkenlights/bf62b20 | 23:40 |
qi-bot | [commit] Werner Almesberger: ubb-la/ubb-la. (xfers): re-optimize the start bit (master) http://qi-hw.com/p/ben-blinkenlights/3b007eb | 23:40 |
qi-bot | [commit] Werner Almesberger: ubb-la/ubb-la.c (xfers): revert to "safe" end-of-command synchronization (master) http://qi-hw.com/p/ben-blinkenlights/760e8a8 | 23:40 |
qi-bot | [commit] Werner Almesberger: ubb-la/ubb-la.c: add more section titles (master) http://qi-hw.com/p/ben-blinkenlights/b7688f3 | 23:40 |
qi-bot | [commit] Werner Almesberger: ubb-la/gui.c: experimental GUI code (WIP) (master) http://qi-hw.com/p/ben-blinkenlights/94e099e | 23:40 |
qi-bot | [commit] Werner Almesberger: ubb-la/gui.c: use powers of two for zoom and integer arithmetic (WIP) (master) http://qi-hw.com/p/ben-blinkenlights/1b0a2cf | 23:40 |
qi-bot | [commit] Werner Almesberger: ubb-la/gui.c (gui): fix the event loop to properly ignore unrecognized events (master) http://qi-hw.com/p/ben-blinkenlights/12a1808 | 23:40 |
qi-bot | [commit] Werner Almesberger: libubb/mmcclk.c (mmcclk_first): add flags to relax clock selection constraints (master) http://qi-hw.com/p/ben-blinkenlights/591bb64 | 00:28 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ubb-patgen/ubb-patgen.c (frequencies): adapt use of mmcclk for API change (master) http://qi-hw.com/p/ben-blinkenlights/66a487b | 00:28 |
qi-bot | [commit] Werner Almesberger: ubb-la/ubb-la.c (frequency): adapt use of mmcclk for API change (master) http://qi-hw.com/p/ben-blinkenlights/85bda4c | 00:28 |
qi-bot | [commit] Werner Almesberger: ubb-la/ubb-la.c: new option -F freq_MHz to select "unsafe" frequencies (master) http://qi-hw.com/p/ben-blinkenlights/f862a82 | 00:28 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/ubb-patgen.c: new option -F freq_Hz to select "unsafe" frequencies (master) http://qi-hw.com/p/ben-blinkenlights/04b235c | 00:28 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/ubb-patgen.c: new option -I inter_s to select "unsafe" frequencies (master) http://qi-hw.com/p/ben-blinkenlights/128590b | 00:28 |
qi-bot | [commit] Werner Almesberger: ubb-la/ubb-la.c (do_bufs): don't skip 122 nibbled (for evaluation) (master) http://qi-hw.com/p/ben-blinkenlights/4ffd610 | 23:45 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ubb-la/ubb-la.c (xfers): wait for END_CMD_RES instead of DATA_FIFO_EMPTY (master) http://qi-hw.com/p/ben-blinkenlights/18a822b | 23:45 |
qi-bot | [commit] Werner Almesberger: ubb-la/ubb-la.c (xfers): instead of waiting for event, use hand-optimized delay loop (master) http://qi-hw.com/p/ben-blinkenlights/14b7a9c | 23:45 |
qi-bot | [commit] Werner Almesberger: ubb-la/ubb-la.c (INITIAL_SKIP): describe how the value was obtained (master) http://qi-hw.com/p/ben-blinkenlights/4ceee66 | 02:27 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ubb-la/ubb-la.c (do_buf): move pretty-printing to new function print_samples (master) http://qi-hw.com/p/ben-blinkenlights/8316bc0 | 02:27 |
qi-bot | [commit] Werner Almesberger: libubb/physmem.c (physmem_xlat): make "v" "const" (master) http://qi-hw.com/p/ben-blinkenlights/c796ab1 | 02:27 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/ubb-patgen.c (send_buffer): physmem_xlat no longer needs a cast (master) http://qi-hw.com/p/ben-blinkenlights/b0d89b2 | 02:27 |
qi-bot | [commit] Werner Almesberger: ubb-la/ubb-la.c (do_buf): physmem_xlat doesn't need a cast (master) http://qi-hw.com/p/ben-blinkenlights/13f3417 | 02:27 |
qi-bot | [commit] Werner Almesberger: libubb/physmem.c (physmem_xlat): don't close the (supposedly) cached fd (master) http://qi-hw.com/p/ben-blinkenlights/96ae331 | 02:27 |
qi-bot | [commit] Werner Almesberger: ubb-la/ubb-la.c: option -n N to enter experimental multi-buffer mode (WIP) (master) http://qi-hw.com/p/ben-blinkenlights/37a219b | 02:27 |
qi-bot | [commit] Werner Almesberger: ubb-la/Makefile (CFLAGS): use more specific -O9 -fno-tree-cselim (master) http://qi-hw.com/p/ben-blinkenlights/09de245 | 22:57 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ubb-patgen/Makefile (CFLAGS): use more specific -O9 -fno-tree-cselim (master) http://qi-hw.com/p/ben-blinkenlights/a947b5e | 22:57 |
qi-bot | [commit] Werner Almesberger: ubb-la/Makefile (CFLAGS): -O9 is currently unsafe; use -O1 (master) http://qi-hw.com/p/ben-blinkenlights/e1eea4f | 18:37 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ubb-patgen/Makefile (CFLAGS): -O9 is currently unsafe; use -O1 (master) http://qi-hw.com/p/ben-blinkenlights/00ef01a | 18:37 |
qi-bot | [commit] Werner Almesberger: ubb-la/Makefile (CFLAGS): even -O1 isn't safe; use -O0 instead (master) http://qi-hw.com/p/ben-blinkenlights/bac21bf | 20:38 |
qi-bot | [commit] Werner Almesberger: ubb-la/ubb-la.c: add command-line options, keyboard abort (master) http://qi-hw.com/p/ben-blinkenlights/62284fb | 21:27 |
qi-bot | [commit] Maarten ter Huurne: Changed text color of warnings from yellow to magenta (packages) http://qi-hw.com/p/gmenu2x/a18730e | 22:29 |
qi-bot | [commit] Maarten ter Huurne: Made GMenu2X::menu private (packages) http://qi-hw.com/p/gmenu2x/e4d78be | 22:29 |
qi-bot | [commit] Maarten ter Huurne: Ignore OPK files of which the name starts with a dot (packages) http://qi-hw.com/p/gmenu2x/90ec4b9 | 22:29 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/Makefile (CFLAGS): even -O1 isn't safe; use -O0 instead (master) http://qi-hw.com/p/ben-blinkenlights/fc4b8e7 | 23:09 |
qi-bot | [commit] Werner Almesberger: ubb-la/ubb-la.c (do_buf): skip over the first 122 samples (master) http://qi-hw.com/p/ben-blinkenlights/4ce6866 | 23:09 |
qi-bot | [commit] Werner Almesberger: ubb-la/README: brief description of ubb-la (master) http://qi-hw.com/p/ben-blinkenlights/0702675 | 23:09 |
qi-bot | [commit] Werner Almesberger: ubb-la/hw/: proof-of-concept passive LA adapter board (master) http://qi-hw.com/p/ben-blinkenlights/d4c1f56 | 14:55 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ubb-la/: data capture via UBB and MSC+DMA (WIP) (master) http://qi-hw.com/p/ben-blinkenlights/2c5b362 | 14:55 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/timeline.fig: timeline of pattern generation (description in README) (master) http://qi-hw.com/p/ben-blinkenlights/a313515 | 22:21 |
---|---|---|
qi-bot | [commit] Werner Almesberger: libubb/include/ubb/regs4740.h: add symbolic bit/field definitions for MSC_* (master) http://qi-hw.com/p/ben-blinkenlights/8509c1f | 22:21 |
qi-bot | [commit] Werner Almesberger: libubb/mmcclk.c: use symbolic bit/field definitions for MSC_* (master) http://qi-hw.com/p/ben-blinkenlights/4cb68b7 | 22:21 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/ubb-patgen.c: use symbolic bit/field definitions for MSC_* (master) http://qi-hw.com/p/ben-blinkenlights/486471e | 22:21 |
qi-bot | [commit] Werner Almesberger: libubb/include/ubb/regs4740.h: add symbolic bit/field definitions for DMA (master) http://qi-hw.com/p/ben-blinkenlights/5efafd6 | 22:21 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/ubb-patgen.c: use symbolic bit/field definitions for DMA (master) http://qi-hw.com/p/ben-blinkenlights/5025f36 | 22:21 |
qi-bot | [commit] Werner Almesberger: ubb/solder-cable.fig: drawing to illustrate soldering a cable to UBB (master) http://qi-hw.com/p/ben-blinkenlights/8dda120 | 01:53 |
---|---|---|
qi-bot | [commit] Xiangfu: cgminer: update to 2.10.4, include root-files (master) http://qi-hw.com/p/openwrt-packages/25b0a63 | 15:41 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/ubb-patgen.c (show_frequencies): show duplicate entries only one (master) http://qi-hw.com/p/ben-blinkenlights/752a77f | 06:57 |
---|---|---|
qi-bot | [commit] Werner Almesberger: libubb/physmem.c: new function physmem_flush to flush cached writes to memory (master) http://qi-hw.com/p/ben-blinkenlights/a8f905a | 06:57 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/ubb-patgen.c (send_buffer): use physmem_flush instead of cacheflush (master) http://qi-hw.com/p/ben-blinkenlights/ff38f1c | 06:57 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/ubb-patgen.c: move frequency difference warning into select_freq (master) http://qi-hw.com/p/ben-blinkenlights/9930ae6 | 06:57 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/ubb-patgen.c: accept SI suffixes and a unit for durations as well (master) http://qi-hw.com/p/ben-blinkenlights/c124e1a | 06:57 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/ubb-patgen.c: new option -i to select frequency by cycle time (master) http://qi-hw.com/p/ben-blinkenlights/39f4e48 | 06:57 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/ubb-patgen.c: new option -d to debounce the trigger (master) http://qi-hw.com/p/ben-blinkenlights/0129a59 | 06:57 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/ubb-patgen.c: new option -w to add delay before sending the pattern (master) http://qi-hw.com/p/ben-blinkenlights/2161341 | 06:57 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/ubb-patgen.c (main): sort options alphabetically in "switch" statement (master) http://qi-hw.com/p/ben-blinkenlights/6d749fa | 06:57 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/ubb-patgen.c: run at realtime priority while waiting for trigger (master) http://qi-hw.com/p/ben-blinkenlights/4729d00 | 06:57 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/ubb-patgen.c: support trigger sequences, e.g., 01 for a rising edge (master) http://qi-hw.com/p/ben-blinkenlights/66080fe | 13:31 |
qi-bot | [commit] Werner Almesberger: libubb/physmem.c (physmem_xlat_vec): more general version of physmem_xlat (master) http://qi-hw.com/p/ben-blinkenlights/3161d55 | 13:31 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/ubb-patgen.c (send_buffer): use physmem_xlat_vec (master) http://qi-hw.com/p/ben-blinkenlights/2de15b9 | 13:31 |
qi-bot | [commit] Werner Almesberger: libubb/physmem.c: remove physmem_xlat; cache open pagemap fd (master) http://qi-hw.com/p/ben-blinkenlights/35d4b9f | 13:31 |
qi-bot | [commit] Werner Almesberger: libubb/physmem.c (physmem_xlat_vec): rename to physmem_xlat (master) http://qi-hw.com/p/ben-blinkenlights/e669a1b | 13:31 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/ubb-patgen.c (send_buffer): track physmem_xlat_vec renaming (master) http://qi-hw.com/p/ben-blinkenlights/b8f2a8b | 13:31 |
qi-bot | [commit] Werner Almesberger: swuart-chat/chat.c: options -r and -t to select pins; bit rate argument (master) http://qi-hw.com/p/ben-blinkenlights/5be0b56 | 15:08 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/README: add "!\r" to UART example (master) http://qi-hw.com/p/ben-blinkenlights/f920c66 | 15:08 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/ubb-patgen.c: clean up pattern generation and boundaries (master) http://qi-hw.com/p/ben-blinkenlights/fa8b5b6 | 01:19 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ubb-patgen/ubb-patgen.c: describe the pattern transfer logic (master) http://qi-hw.com/p/ben-blinkenlights/e5cb1c9 | 01:19 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/ubb-patgen.c (dma_pattern): move pattern parser to parse_pattern (master) http://qi-hw.com/p/ben-blinkenlights/3febc90 | 01:19 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/ubb-patgen.c: DMA has mystery glitches. Use PIO for now. (master) http://qi-hw.com/p/ben-blinkenlights/908b063 | 01:19 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/: flush dcache and write buffer before doing DMA (master) http://qi-hw.com/p/ben-blinkenlights/b6ee672 | 02:34 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/ubb-patgen.c: DMA works now. Get rid of the PIO option. (master) http://qi-hw.com/p/ben-blinkenlights/c6306ff | 02:34 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/ubb-patgen.c (dma_pattern): mlockall (before address translation and DMA) (master) http://qi-hw.com/p/ben-blinkenlights/dad9739 | 02:34 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/ubb-patgen.c: clean up section structure (master) http://qi-hw.com/p/ben-blinkenlights/a5fbf55 | 20:11 |
qi-bot | [commit] Werner Almesberger: libubb/mmcclk.c (mmcclk_start): also reset the MMC controller (master) http://qi-hw.com/p/ben-blinkenlights/72f2125 | 20:11 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/ubb-patgen.c: clean up usage (-c selects clkout only; -C to monitor) (master) http://qi-hw.com/p/ben-blinkenlights/6e67671 | 20:11 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/ubb-patgen.c: remove pattern frequency and use -f for bus clock (master) http://qi-hw.com/p/ben-blinkenlights/1111156 | 20:11 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/ubb-patgen.c: "ubb-patgen -f FREQ" calculates the frequency (master) http://qi-hw.com/p/ben-blinkenlights/eedb0f0 | 20:11 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/ubb-patgen.c: option -q when dumping frequencies suppressed details (master) http://qi-hw.com/p/ben-blinkenlights/1aedd4b | 20:11 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/table/: generate a PNG with a table of MMC bus clock frequencies (master) http://qi-hw.com/p/ben-blinkenlights/3c94432 | 20:11 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/table/mktab: make the long vertical axes thinner (master) http://qi-hw.com/p/ben-blinkenlights/653910b | 20:11 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/ubb-patgen.c: accept file (- for standard input) as pattern source (master) http://qi-hw.com/p/ben-blinkenlights/69aba6a | 20:11 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/ubb-patgen.c: new option -p to force interpretation as pattern (master) http://qi-hw.com/p/ben-blinkenlights/d60ef14 | 20:11 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/ubb-patgen.c: new option -m MASK to choose which DATx lines to use (master) http://qi-hw.com/p/ben-blinkenlights/1c76cab | 21:41 |
qi-bot | [commit] Werner Almesberger: libubb/mmcclk.c (BUS_LIMIT_MHZ): explain the 56 MHz limit (master) http://qi-hw.com/p/ben-blinkenlights/10b0dea | 21:41 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/ubb-patgen.c: new option -t 0|1 to start pattern on TRIGGER/CLK (master) http://qi-hw.com/p/ben-blinkenlights/0bb711e | 21:41 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/README: brief description how ubb-patgen works (master) http://qi-hw.com/p/ben-blinkenlights/d5ea5d9 | 22:35 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/hw/: a simple resistor on CMD is sufficient - no need for a cap (master) http://qi-hw.com/p/ben-blinkenlights/4714038 | 06:57 |
---|---|---|
qi-bot | [commit] Werner Almesberger: libubb/: add experimental physical memory allocation/mapping module (master) http://qi-hw.com/p/ben-blinkenlights/8d59f8a | 06:57 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/: add DMA-based pattern transfer (WIP) (master) http://qi-hw.com/p/ben-blinkenlights/09bf9c2 | 06:57 |
qi-bot | [commit] Xiangfu: cgminer: add both ft232 and pl2303 chip support on hotplug (master) http://qi-hw.com/p/openwrt-packages/78fe5e4 | 12:50 |
---|
qi-bot | [commit] Werner Almesberger: libubb/Makefile: build also a shared version of libubb; better cleanup (master) http://qi-hw.com/p/ben-blinkenlights/64c14fb | 11:25 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ubbctl/Makefile: make default build shared; add target "static" (master) http://qi-hw.com/p/ben-blinkenlights/7b8a2e1 | 11:25 |
qi-bot | [commit] Werner Almesberger: ubbctl/Makefile: add copyright header (master) http://qi-hw.com/p/ben-blinkenlights/b557adf | 11:25 |
qi-bot | [commit] Werner Almesberger: ubblib/Makefile: don't generate the versioned shared library (master) http://qi-hw.com/p/ben-blinkenlights/2004d8c | 14:48 |
qi-bot | [commit] Werner Almesberger: libubb/Makefile: unleak mmcclk.o and mis-typed mmclk.h (master) http://qi-hw.com/p/ben-blinkenlights/a593da0 | 17:21 |
qi-bot | [commit] Werner Almesberger: libubb/mmcclk.c: helper functions for selecting and configuring the MMC bus clock (master) http://qi-hw.com/p/ben-blinkenlights/1eb8e64 | 18:20 |
qi-bot | [commit] Werner Almesberger: libubb/include/ubb/regs4740.h: add CPCCR (clock control register) (master) http://qi-hw.com/p/ben-blinkenlights/2f4e1bd | 19:15 |
qi-bot | [commit] Werner Almesberger: libubb/mmcclk.c (mmcclk_first): base clock calculation on state of CPCCR.PCS (master) http://qi-hw.com/p/ben-blinkenlights/b18d688 | 19:33 |
qi-bot | [commit] Werner Almesberger: libubb/Makefile: get rid of version bureaucracy (suggested by Kyak) (master) http://qi-hw.com/p/ben-blinkenlights/127e18d | 19:33 |
qi-bot | [commit] kyak: libubb: initial package (master) http://qi-hw.com/p/openwrt-packages/971cadb | 19:38 |
qi-bot | [commit] kyak: ubbctl: initial package (master) http://qi-hw.com/p/openwrt-packages/66d3d0f | 19:38 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/hw/: schematics of a pattern generator based on UBB (master) http://qi-hw.com/p/ben-blinkenlights/ed91f62 | 20:02 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/hw/labels.fig: cut-out labels for the wires (master) http://qi-hw.com/p/ben-blinkenlights/7c1f065 | 20:02 |
qi-bot | [commit] Werner Almesberger: ubb-patgen/: UBB-based pattern generator (WIP) (master) http://qi-hw.com/p/ben-blinkenlights/52ce194 | 20:02 |
qi-bot | [commit] kyak: ben-cyrillic: use phonetic keymap by default (master) http://qi-hw.com/p/openwrt-packages/fa463c3 | 13:08 |
---|---|---|
qi-bot | [commit] Werner Almesberger: README: add ubbctl and ubb-jtag (master) http://qi-hw.com/p/ben-blinkenlights/85ed493 | 14:40 |
qi-bot | [commit] Werner Almesberger: ubbctl/ubbctl.c: add copyright header (master) http://qi-hw.com/p/ben-blinkenlights/fe96b3b | 14:40 |
qi-bot | [commit] Werner Almesberger: ubbctl/ubbctl.c (main): move pin status display to separate function (master) http://qi-hw.com/p/ben-blinkenlights/e6a0e42 | 14:40 |
qi-bot | [commit] Werner Almesberger: ubbctl/ubbctl.c (main): add command line processing and usage display (master) http://qi-hw.com/p/ben-blinkenlights/33085ce | 14:40 |
qi-bot | [commit] Werner Almesberger: ubbctl/ubbctl.c (show_pins): also show level seen at pin (master) http://qi-hw.com/p/ben-blinkenlights/77fd696 | 14:40 |
qi-bot | [commit] Werner Almesberger: ubbctl/ubbctl.c (show_pins): indicate function pins with "F" instead of "FN" (master) http://qi-hw.com/p/ben-blinkenlights/5297de4 | 14:40 |
qi-bot | [commit] Werner Almesberger: ubbctl/ubbctl.c: add setting of UBB signals (DAT0=1, etc.) (master) http://qi-hw.com/p/ben-blinkenlights/246a8a0 | 14:40 |
qi-bot | [commit] Werner Almesberger: ubbctl/ubbctl.c: add actions "on" and "off" to control nPWR (master) http://qi-hw.com/p/ben-blinkenlights/fd5707e | 14:40 |
qi-bot | [commit] Werner Almesberger: ubbctl/ubbctl.c: new option -c for continuous display (master) http://qi-hw.com/p/ben-blinkenlights/5fadbce | 16:49 |
qi-bot | [commit] Werner Almesberger: ubbctl/README: short documentation (master) http://qi-hw.com/p/ben-blinkenlights/ed19239 | 16:49 |
qi-bot | [commit] kyak: w3m: fix build (master) http://qi-hw.com/p/openwrt-packages/a6504b8 | 07:42 |
---|---|---|
qi-bot | [commit] Werner Almesberger: README: there's much more than the blinkenlights here (master) http://qi-hw.com/p/ben-blinkenlights/d33da70 | 18:11 |
qi-bot | [commit] Werner Almesberger: ubbctl/: UBB pin status decoder (master) http://qi-hw.com/p/ben-blinkenlights/f0c6e87 | 18:11 |
qi-bot | [commit] Werner Almesberger: ubb-jtag/: instructions for building a JTAG interface with UBB (master) http://qi-hw.com/p/ben-blinkenlights/1024f48 | 18:11 |
qi-bot | [commit] Werner Almesberger: ubb-jtag/ubb-jtag-m1.sch: schematics for UBB-VGA-M1 cable (master) http://qi-hw.com/p/ben-blinkenlights/d16af2a | 18:11 |
qi-bot | [commit] Werner Almesberger: ubb-jtag/README: ideas for increasing the speed (master) http://qi-hw.com/p/ben-blinkenlights/b6a9e23 | 18:57 |
qi-bot | [commit] Werner Almesberger: ubb-jtag/ubb-jtag-m1.sch: connect VREF to 2.5 V; explain that R3 is untested (master) http://qi-hw.com/p/ben-blinkenlights/a58e789 | 18:57 |
qi-bot | [commit] kyak: libpurple: fix missing iconv (master) http://qi-hw.com/p/openwrt-packages/4112aca | 09:45 |
---|---|---|
qi-bot | [commit] Xiangfu: directvnc: fix depends +libjped (master) http://qi-hw.com/p/openwrt-packages/38c2947 | 10:59 |
qi-bot | [commit] kyak: centerim5: update to latest git and fix missing iconv (master) http://qi-hw.com/p/openwrt-packages/1b81446 | 11:42 |
qi-bot | [commit] kyak: mpg123: fix missing deps (master) http://qi-hw.com/p/openwrt-packages/2b320f7 | 12:33 |
qi-bot | [commit] kyak: jfbterm: fix dl url (master) http://qi-hw.com/p/openwrt-packages/88f3c32 | 12:50 |
qi-bot | [commit] kyak: qstardict: update to compile with latest glib2 (master) http://qi-hw.com/p/openwrt-packages/0267b88 | 20:47 |
qi-bot | [commit] kyak: sdcv: fix build (master) http://qi-hw.com/p/openwrt-packages/730b038 | 20:51 |
qi-bot | [commit] Werner Almesberger: lpc111x-isp/lpc111x.c: define IO pins via array, not #defines (master) http://qi-hw.com/p/ben-blinkenlights/3b0c8c6 | 13:38 |
---|---|---|
qi-bot | [commit] Werner Almesberger: lpc111x-isp/lpc111x.c: new option -P function=signal to reassign pins (master) http://qi-hw.com/p/ben-blinkenlights/376aa54 | 13:38 |
qi-bot | [commit] Werner Almesberger: ircstat/stat: add 2013 (master) http://qi-hw.com/p/wernermisc/62aa854 | 15:46 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ircstat/ML: update for 12/2012 (master) http://qi-hw.com/p/wernermisc/40285da | 15:46 |
qi-bot | [commit] Xiangfu: cgminer: disable curses support (master) http://qi-hw.com/p/openwrt-packages/959b320 | 00:34 |
---|---|---|
qi-bot | [commit] Werner Almesberger: lpc111x-isp/lpc111x.c: if file argument is given, flash that file (master) http://qi-hw.com/p/ben-blinkenlights/66d0913 | 06:20 |
qi-bot | [commit] Werner Almesberger: lpc111x-isp/lpc111x.c: new option -r to reset the target and let it run (master) http://qi-hw.com/p/ben-blinkenlights/c7a7d35 | 06:20 |
qi-bot | [commit] Werner Almesberger: lpc111x-isp/test/: proof of concept LED-blinking code (master) http://qi-hw.com/p/ben-blinkenlights/49ff81f | 06:20 |
qi-bot | [commit] Werner Almesberger: libubb/README: document GPIO and register access (master) http://qi-hw.com/p/ben-blinkenlights/9d29821 | 13:04 |
qi-bot | [commit] Werner Almesberger: libubb/README: describe how to get rid of competing drivers (master) http://qi-hw.com/p/ben-blinkenlights/506db2d | 13:04 |
qi-bot | [commit] Werner Almesberger: libubb/swuart.c: only return error codes or fail silently; don't print messages (master) http://qi-hw.com/p/ben-blinkenlights/5f3828f | 22:31 |
qi-bot | [commit] Werner Almesberger: swuart-chat/chat.c (main): use perror if swuart_open fails (master) http://qi-hw.com/p/ben-blinkenlights/0b81ffa | 22:31 |
qi-bot | [commit] Werner Almesberger: lpc111x-isp/lpc111x.c (start_isp): check for swuart_open failure (master) http://qi-hw.com/p/ben-blinkenlights/6dfaedd | 22:31 |
qi-bot | [commit] Werner Almesberger: libubb/README.SWUART: document the software-implemented UART (master) http://qi-hw.com/p/ben-blinkenlights/9ddc377 | 22:31 |
qi-bot | [commit] Werner Almesberger: lpc111x-isp/lpc111x.c: straighten *dialog*() API; radically simplify tracing (master) http://qi-hw.com/p/ben-blinkenlights/eda1135 | 07:01 |
---|---|---|
qi-bot | [commit] Werner Almesberger: lpc111x-isp/lpc111x.c (identify): retrieve and print the chip's unique ID (master) http://qi-hw.com/p/ben-blinkenlights/505caf9 | 07:01 |
qi-bot | [commit] Werner Almesberger: libubb/swuart.c (swuart_open): don't call ubb_power (master) http://qi-hw.com/p/ben-blinkenlights/be82db0 | 07:01 |
qi-bot | [commit] Werner Almesberger: lpc111x-isp/lpc111x.c: new option -n to disable powering the device (master) http://qi-hw.com/p/ben-blinkenlights/b2f1310 | 07:01 |
qi-bot | [commit] Werner Almesberger: lpc111x-isp/lpc111x.c: read and dump (to stdout) the entire Flash (master) http://qi-hw.com/p/ben-blinkenlights/5246f5f | 07:01 |
qi-bot | [commit] Werner Almesberger: libubb/swuart.c: don't open/close UBB (master) http://qi-hw.com/p/ben-blinkenlights/6614209 | 00:01 |
---|---|---|
qi-bot | [commit] Werner Almesberger: swuart-chat/chat.c: open/close UBB explicitly (tracking API change) (master) http://qi-hw.com/p/ben-blinkenlights/ace55ff | 00:01 |
qi-bot | [commit] Werner Almesberger: lpc111x-isp/: Ben-based in-system programmer (ISP) for NXP LPC111x chips (WIP) (master) http://qi-hw.com/p/ben-blinkenlights/eea0484 | 00:01 |
qi-bot | [commit] Xiangfu: cgminer: enable all IP allowed to access the API (master) http://qi-hw.com/p/openwrt-packages/fddf50a | 03:27 |
qi-bot | [commit] Werner Almesberger: lpc111x-isp/lpc111x.c: restructure code (WIP) (master) http://qi-hw.com/p/ben-blinkenlights/5487578 | 11:50 |
qi-bot | [commit] Werner Almesberger: libubb/swuart.c: use mlockall to prevent page faults with interrupts off (master) http://qi-hw.com/p/ben-blinkenlights/e4f8b97 | 11:50 |
qi-bot | [commit] Werner Almesberger: lpc111x-isp/lpc111x.c: option -v to control verbosity level (master) http://qi-hw.com/p/ben-blinkenlights/c4d64fa | 11:50 |
qi-bot | [commit] Werner Almesberger: lpc111x-isp/lpc111x.c: add printf-style dialog() variants (master) http://qi-hw.com/p/ben-blinkenlights/0553fed | 11:50 |
qi-bot | [commit] Werner Almesberger: lpc111x-isp/lpc111x.c: flesh out device identification (master) http://qi-hw.com/p/ben-blinkenlights/90d39d3 | 11:50 |
qi-bot | [commit] juhosg: mpc83xx: nuke 3.3 support (master) http://qi-hw.com/p/openwrt-xburst/1c7dd15 | 05:17 |
---|---|---|
qi-bot | [commit] juhosg: mpc83xx: add support for 3.7 (master) http://qi-hw.com/p/openwrt-xburst/7d9a07b | 05:17 |
qi-bot | [commit] cyrus: base-files: Fix a typo in config_list_foreach (master) http://qi-hw.com/p/openwrt-xburst/593cc2f | 05:17 |
qi-bot | [commit] cyrus: 6relayd: Advertise IPv6-specific MTU instead of generic (master) http://qi-hw.com/p/openwrt-xburst/37d0fcb | 05:17 |
qi-bot | [commit] cyrus: 6distributed: feature update (master) http://qi-hw.com/p/openwrt-xburst/49fe1fe | 05:17 |
qi-bot | [commit] cyrus: ipv6-support: (master) http://qi-hw.com/p/openwrt-xburst/9b62f5f | 05:17 |
qi-bot | [commit] cyrus: Remove site-border routing filter due to problems (master) http://qi-hw.com/p/openwrt-xburst/195094b | 05:17 |
qi-bot | [commit] cyrus: ipv6-support: Remove site-border feature (master) http://qi-hw.com/p/openwrt-xburst/517ebc0 | 05:17 |
qi-bot | [commit] nbd: uci: update to latest version (adds list delete support), enable parallel build (master) http://qi-hw.com/p/openwrt-xburst/0296ef3 | 05:17 |
qi-bot | [commit] hauke: brcm47xx: bcma: correct M25P32 serial flash ID (master) http://qi-hw.com/p/openwrt-xburst/73af5c0 | 05:17 |
qi-bot | [commit] nbd: kernel: remove the cisco SIP NAT patch, at least on 3.6 it crashes (master) http://qi-hw.com/p/openwrt-xburst/5e4cd88 | 05:17 |
qi-bot | [commit] Xiangfu: xburst: ben nanonote:: add ks7010 wrieless card support (master) http://qi-hw.com/p/openwrt-xburst/4a16fa4 | 05:17 |
qi-bot | [commit] Xiangfu: xburst: add ben-wpan support (master) http://qi-hw.com/p/openwrt-xburst/098317b | 05:17 |
qi-bot | [commit] Xiangfu: xburst: ben-wpan: fix atusb cannot build as module (master) http://qi-hw.com/p/openwrt-xburst/05b58eb | 05:17 |
qi-bot | [commit] Xiangfu Liu: xburst: ben-wpan: add kernel module file. thanks to blogic #qi-hardware @freenode.net (master) http://qi-hw.com/p/openwrt-xburst/955fd00 | 05:17 |
qi-bot | [commit] Xiangfu: xburst: ben nanonote: disable wpan kernel options, should be build as module (master) http://qi-hw.com/p/openwrt-xburst/db874d1 | 05:17 |
qi-bot | [commit] Xiangfu: xburst: ben nanonote: add modify keys and fbcon-color patches (master) http://qi-hw.com/p/openwrt-xburst/44fed92 | 05:17 |
qi-bot | [commit] Xiangfu: xburst: ben nanonote: add ben boot logo (master) http://qi-hw.com/p/openwrt-xburst/702c3aa | 05:17 |
qi-bot | [commit] Xiangfu: xburst: ben nanonote: select ben logo, unset CONFIG_IEEE802154_6LOWPAN, SENSORS_JZ4740 (master) http://qi-hw.com/p/openwrt-xburst/9df13b1 | 05:17 |
qi-bot | [commit] Xiangfu: uboot-xburst: update to 2012.10-rc2 (master) http://qi-hw.com/p/openwrt-xburst/5938c82 | 05:17 |
qi-bot | [commit] Werner Almesberger: tornado/cpu/cpu.brd: make connection to the MCU's GND pad straighter (master) http://qi-hw.com/p/UNNAMED PROJECT/121acf6 | 23:12 |
qi-bot | [commit] Werner Almesberger: tornado/cpu/cpu.sch (CON3): nISP and nRESET were swapped (master) http://qi-hw.com/p/UNNAMED PROJECT/63a4b89 | 23:12 |
qi-bot | [commit] Werner Almesberger: components/tps6216x.lib: add 9th pin for center pad (AGND) (master) http://qi-hw.com/p/kicad-libs/435a339 | 01:16 |
---|---|---|
qi-bot | [commit] Werner Almesberger: tornado/cpu/: new version of the CPU board (WIP) (master) http://qi-hw.com/p/UNNAMED PROJECT/87b1fbb | 01:16 |
qi-bot | [commit] Werner Almesberger: tornado/cpu/cpu.brd: improve 3V3 routing (master) http://qi-hw.com/p/UNNAMED PROJECT/0e9b093 | 01:16 |
qi-bot | [commit] Werner Almesberger: tornado/cpu/cpu.sch: split overly crowded sheet into two (master) http://qi-hw.com/p/UNNAMED PROJECT/ed61eab | 01:16 |
qi-bot | [commit] Werner Almesberger: tornado/cpu/: rearrange things and fix ERC problems (master) http://qi-hw.com/p/UNNAMED PROJECT/9081d91 | 01:16 |
qi-bot | [commit] Werner Almesberger: tornado/led/: update schematics for new power distribution (master) http://qi-hw.com/p/UNNAMED PROJECT/d278ebb | 17:37 |
qi-bot | [commit] Werner Almesberger: tornado/led/led.cmp: update for new components and changed references (master) http://qi-hw.com/p/UNNAMED PROJECT/bf2e2c3 | 17:37 |
qi-bot | [commit] Werner Almesberger: tornado/led/: layout for new LED board version (master) http://qi-hw.com/p/UNNAMED PROJECT/352779a | 17:37 |
qi-bot | [commit] Werner Almesberger: tornado/led/led.brd: clean up layout (master) http://qi-hw.com/p/UNNAMED PROJECT/12fc6cc | 17:37 |
qi-bot | [commit] Werner Almesberger: tornado/cpu/cpu.brd: include subsystem name (CPU) in text label (master) http://qi-hw.com/p/UNNAMED PROJECT/b75570a | 17:37 |
qi-bot | [commit] Werner Almesberger: cameo/templates/mkmk-simple: use "set size ratio -1", not "set size ratio square" (master) http://qi-hw.com/p/cae-tools/9a6772f | 22:54 |
qi-bot | [commit] Xiangfu: update compile-openwrt-xburst.sh (master) http://qi-hw.com/p/openwrt-packages/05f8519 | 01:00 |
---|---|---|
qi-bot | [commit] Xiangfu: cgminer: update to 2.10.2 (master) http://qi-hw.com/p/openwrt-packages/d3474a1 | 01:00 |
qi-bot | [commit] Werner Almesberger: components/memcard8.lib: MEMCARD8 variants MEMCARD8-SHIELD4 and MEMCARD8-SHIELD4-SW (master) http://qi-hw.com/p/kicad-libs/a50f086 | 01:24 |
---|---|---|
qi-bot | [commit] Werner Almesberger: modules/8_10-socket-ra-push-pull.fpd: Amphenol 114-00841-68 push-pull uSD (master) http://qi-hw.com/p/kicad-libs/6b6eaf6 | 01:24 |
qi-bot | [commit] Werner Almesberger: modules/inductor-2p.fpd: footprints for 2-SMD inductors (3mmx3mm for now) (master) http://qi-hw.com/p/kicad-libs/b3d7602 | 01:24 |
qi-bot | [commit] Werner Almesberger: dsv/dsv: allow -p and -u to be used together (master) http://qi-hw.com/p/eda-tools/bbb6513 | 01:33 |
qi-bot | [commit] Werner Almesberger: components/inductor.lib: general inductor, reusing filter.lib by Adam Wang (master) http://qi-hw.com/p/kicad-libs/0b75a76 | 02:14 |
qi-bot | [commit] Werner Almesberger: AUTHORS: correct origin of MEMCARD8 (Xiangfu made it, not Adam) (master) http://qi-hw.com/p/kicad-libs/4f1978d | 02:14 |
qi-bot | [commit] Werner Almesberger: components/lis3dh.lib: ST LIS3DH 3-axis acceleration sensor (master) http://qi-hw.com/p/kicad-libs/8881356 | 22:25 |
---|---|---|
qi-bot | [commit] Werner Almesberger: modules/lga.fpd: LGA-16-3x3 package, for LIS3DH (master) http://qi-hw.com/p/kicad-libs/5c3043a | 22:25 |
qi-bot | [commit] Werner Almesberger: BOOKSHELF: add data sheets of parts for next Tornado iteration (master) http://qi-hw.com/p/UNNAMED PROJECT/0f17c40 | 22:27 |
qi-bot | [commit] Werner Almesberger: BOOKSHELF: add LIS3DH app note; add push-pull uSD card holder (master) http://qi-hw.com/p/UNNAMED PROJECT/fbb75b7 | 22:27 |
qi-bot | [commit] Werner Almesberger: experimental directive "allow holes" to allow multiple holes per pad (master) http://qi-hw.com/p/fped/bb055fa | 01:45 |
---|---|---|
qi-bot | [commit] Werner Almesberger: Merge branch 'master' of projects.qi-hardware.com:fped (master) http://qi-hw.com/p/fped/1bc94d0 | 01:45 |
qi-bot | [commit] Werner Almesberger: modules/qfn.fpd: NXP "HVQFN33" footprint (without the vias) (master) http://qi-hw.com/p/kicad-libs/d9727bb | 01:46 |
qi-bot | [commit] Werner Almesberger: modules/HIERARCHY: add BGA-256 (master) http://qi-hw.com/p/kicad-libs/3ae4978 | 01:46 |
qi-bot | [commit] Werner Almesberger: modules/: add QFN32-HVQFN (e.g., for NXP LPC1xxx parts) (master) http://qi-hw.com/p/kicad-libs/94f9024 | 01:46 |
qi-bot | [commit] Werner Almesberger: modules/: "make brd" opens pcbnew for footprint examination (master) http://qi-hw.com/p/kicad-libs/cce9081 | 01:46 |
qi-bot | [commit] Werner Almesberger: genkicat: new option "-t title.ps" to include a title page file (master) http://qi-hw.com/p/eda-tools/560bf9d | 03:40 |
qi-bot | [commit] Werner Almesberger: add title pages to the catalogs, with useful information like the creation date (master) http://qi-hw.com/p/kicad-libs/e324adc | 03:54 |
qi-bot | [commit] Xiangfu: bga: use the nominal size (master) http://qi-hw.com/p/kicad-libs/b3fcc76 | 14:34 |
qi-bot | [commit] Werner Almesberger: dsv/dsv (setup): remove trailing whitespace from lines from bookshelf file (master) http://qi-hw.com/p/eda-tools/24160dd | 20:45 |
qi-bot | [commit] Werner Almesberger: dsv/dsv: record source URL in dsv-* file; new option -u to show it (master) http://qi-hw.com/p/eda-tools/676c6a2 | 20:45 |
qi-bot | [commit] Werner Almesberger: components/: TI TPS6216x series 3V-17V 1A Step-Down Converters (master) http://qi-hw.com/p/kicad-libs/a841da7 | 23:35 |
qi-bot | [commit] Werner Almesberger: modules/dfn.fpd: DFN-8 (aka TI's WSON-8) package, for TPS6216x (master) http://qi-hw.com/p/kicad-libs/694cebf | 23:35 |
qi-bot | [commit] Werner Almesberger: title page: always generate title.ps when generating the catalog (master) http://qi-hw.com/p/kicad-libs/21513c1 | 23:35 |
qi-bot | [commit] Werner Almesberger: include common/Makefile after "all", so that it won't override the default (master) http://qi-hw.com/p/kicad-libs/2e07473 | 23:35 |
qi-bot | [commit] Werner Almesberger: Merge branch 'master' of projects.qi-hardware.com:kicad-libs (master) http://qi-hw.com/p/kicad-libs/72b0c31 | 23:35 |
qi-bot | [commit] Werner Almesberger: components/HIERARCHY: add XC6SLX9-CSG324 (master) http://qi-hw.com/p/kicad-libs/e10d1e9 | 21:31 |
---|---|---|
qi-bot | [commit] Werner Almesberger: components/lpc1100-qfn33.lib: NXP LPC11xx series in HVQFN33 package (master) http://qi-hw.com/p/kicad-libs/ecba9a3 | 21:31 |
qi-bot | [commit] Werner Almesberger: components/lpc1100-qfn33.lib: remove dubious "R" (reserved) pin function (master) http://qi-hw.com/p/kicad-libs/1f0d15c | 22:52 |
qi-bot | [commit] Werner Almesberger: tornado/doc/README: calculate image size (master) http://qi-hw.com/p/UNNAMED PROJECT/1c672a6 | 17:12 |
---|
qi-bot | [commit] Werner Almesberger: ioscript/ioscript: allow positions to be redefined (master) http://qi-hw.com/p/ben-blinkenlights/b4530ff | 01:45 |
---|---|---|
qi-bot | [commit] Werner Almesberger: swuart/: split general UART functions from application (master) http://qi-hw.com/p/ben-blinkenlights/2e749f9 | 01:45 |
qi-bot | [commit] Werner Almesberger: swuart/: merge library part into libubb (master) http://qi-hw.com/p/ben-blinkenlights/1c51cc6 | 01:45 |
qi-bot | [commit] Werner Almesberger: swuart/: convert "hammering the peer" demo into a primitive interactive chat (master) http://qi-hw.com/p/ben-blinkenlights/519ebe6 | 01:45 |
qi-bot | [commit] Werner Almesberger: libubb/swuart.c (swuart_open): start TX high, not low (master) http://qi-hw.com/p/ben-blinkenlights/842766b | 01:45 |
qi-bot | [commit] Werner Almesberger: libubb/: helper library for UBB access (master) http://qi-hw.com/p/ben-blinkenlights/2c52dac | 15:31 |
---|---|---|
qi-bot | [commit] Werner Almesberger: swuart/: half-duplex software UART for UBB (WIP) (master) http://qi-hw.com/p/ben-blinkenlights/4689882 | 15:31 |
qi-bot | [commit] Werner Almesberger: swuart/: use a hardware timer and allow full-duplex operation (master) http://qi-hw.com/p/ben-blinkenlights/8816dcf | 15:31 |
qi-bot | [commit] Paul Cercueil: Remove hardcoded MHz values, use the defined main/max clocks instead (packages) http://qi-hw.com/p/gmenu2x/473949b | 04:57 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Add --disable-cpufreq switch to disable clock management (packages) http://qi-hw.com/p/gmenu2x/c9fc163 | 04:57 |
qi-bot | [commit] Paul Cercueil: Hide the selector dir/browser link options if OPK doesn't open a file (packages) http://qi-hw.com/p/gmenu2x/a60d97f | 04:57 |
qi-bot | [commit] Paul Cercueil: Hide the 'Edit' option if there's nothing to configure (packages) http://qi-hw.com/p/gmenu2x/f2e3efd | 04:57 |
qi-bot | [commit] Paul Cercueil: Add support of text manuals (.man.txt files) inside OPK archives (packages) http://qi-hw.com/p/gmenu2x/610b489 | 07:25 |
qi-bot | [commit] Paul Cercueil: Keep CPU frequency scaling for the GCW0 build disabled until it works (packages) http://qi-hw.com/p/gmenu2x/874ddd3 | 21:15 |
qi-bot | [commit] Werner Almesberger: INV: add comment explaining what the fields mean (master) http://qi-hw.com/p/eda-tools/2334bd8 | 03:43 |
---|---|---|
qi-bot | [commit] Werner Almesberger: schhist/schhist2web: explicitly suppress diff in "git show" (master) http://qi-hw.com/p/eda-tools/9385ad0 | 03:43 |
qi-bot | [commit] Werner Almesberger: Merge branch 'master' of projects.qi-hardware.com:eda-tools (master) http://qi-hw.com/p/eda-tools/afae5c7 | 03:43 |
qi-bot | [commit] Xiangfu: nanonote-files/.../compile-openwrt-xburst.sh: update URL to new server (master) http://qi-hw.com/p/openwrt-packages/113a6b7 | 03:46 |
qi-bot | [commit] Paul Cercueil: Move Nanonote specific wallpapers to their platform folder (packages) http://qi-hw.com/p/gmenu2x/2154b59 | 15:52 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: Added wallpaper for GCW Zero (packages) http://qi-hw.com/p/gmenu2x/04b64f4 | 16:00 |
qi-bot | [commit] Maarten ter Huurne: Added .gitignore for data dir (packages) http://qi-hw.com/p/gmenu2x/37a29d3 | 16:00 |
qi-bot | [commit] Paul Cercueil: Load the skin's wallpaper if the default one is not yet defined (packages) http://qi-hw.com/p/gmenu2x/389253b | 17:20 |
qi-bot | [commit] Paul Cercueil: Introduce new skin "OD" for the GCW-Zero platform. (packages) http://qi-hw.com/p/gmenu2x/df7fb98 | 17:20 |
qi-bot | [commit] Werner Almesberger: ircstat/ML: update for 11/2012 (master) http://qi-hw.com/p/wernermisc/6a7c965 | 21:10 |
---|
qi-bot | [commit] Paul Cercueil: Enable support for multiple .desktop for one platform inside OPKs (packages) http://qi-hw.com/p/gmenu2x/efdf766 | 02:42 |
---|
qi-bot | [commit] Paul Cercueil: Renamed 'dingux' platform to 'a320' (packages) http://qi-hw.com/p/gmenu2x/6629a63 | 15:31 |
---|
qi-bot | [commit] Wolfgang Spraul: commit qi-update-all script along with rest of schhist (master) http://qi-hw.com/p/eda-tools/7a16e0f | 04:44 |
---|---|---|
qi-bot | [commit] Wolfgang Spraul: curdir fix (master) http://qi-hw.com/p/eda-tools/b73288f | 06:23 |
qi-bot | [commit] Werner Almesberger: cameo/templates/mkmk-simple: use aspect ratio 1:1 with gnuplot (plot, dplot) (master) http://qi-hw.com/p/cae-tools/c34a154 | 02:19 |
---|---|---|
qi-bot | [commit] Xiangfu: bga.fpd: add ft256 (master) http://qi-hw.com/p/kicad-libs/43aba44 | 14:00 |
qi-bot | [commit] Paul Cercueil: Add initial support for the GCW Zero (packages) http://qi-hw.com/p/gmenu2x/d4c086a | 22:05 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Open OPKs only if compatible with the current platform (packages) http://qi-hw.com/p/gmenu2x/c6a83e1 | 22:05 |
qi-bot | [commit] Paul Cercueil: Dingux: remove empty sections 'emulators' and 'games' (packages) http://qi-hw.com/p/gmenu2x/59ece31 | 22:05 |
qi-bot | [commit] Werner Almesberger: tools/lib/atusb-common.c (atusb_tx): fix compiler warning (master) http://qi-hw.com/p/ben-wpan/155886d | 12:44 |
---|---|---|
qi-bot | [commit] Werner Almesberger: makefiles/Makefile.kicad: use variable TOP instead of hard-coding ../../ path (master) http://qi-hw.com/p/ben-wpan/269b78f | 12:44 |
qi-bot | [commit] Werner Almesberger: ants/meander.fpd: comment out zero-sized tail (hack) (master) http://qi-hw.com/p/ben-wpan/63a6ad2 | 12:44 |
qi-bot | [commit] Paul Cercueil: Add support for reading manuals located inside OPK archives (packages) http://qi-hw.com/p/gmenu2x/77046f3 | 22:47 |
qi-bot | [commit] Xiangfu: Fix compile warnings (master) http://qi-hw.com/p/xburst-tools/5ade9f1 | 09:40 |
---|---|---|
qi-bot | [commit] Xiangfu: bump version (master) http://qi-hw.com/p/xburst-tools/bf5b9f6 | 09:40 |
qi-bot | [commit] Marcos Paulo de Souza: drivers/power/jz4740-battery.c: Use devm_kzalloc (jz-3.6) http://qi-hw.com/p/qi-kernel/6c33cc3 | 19:43 |
qi-bot | [commit] Marcos Paulo de Souza: drivers/power/jz4740-battery.c: Use devm_request_and_ioremap (jz-3.6) http://qi-hw.com/p/qi-kernel/969f08b | 19:43 |
qi-bot | [commit] Xiangfu: add xc6slx9-csg324 base on ftg256 (master) http://qi-hw.com/p/kicad-libs/aa255fb | 04:06 |
---|---|---|
qi-bot | [commit] Xiangfu: add .gitignore (master) http://qi-hw.com/p/kicad-libs/3b75cfe | 04:06 |
qi-bot | [commit] Xiangfu: xc6slx9-csg324: add power/gnd pins (master) http://qi-hw.com/p/kicad-libs/e99a947 | 06:25 |
qi-bot | [commit] Xiangfu: xc6slx9-csg324: add dedicate pins (jtag etc) (master) http://qi-hw.com/p/kicad-libs/1c03185 | 06:34 |
qi-bot | [commit] Xiangfu: xc6slx9-csg324: add all other pins (master) http://qi-hw.com/p/kicad-libs/2dd2768 | 07:40 |
qi-bot | [commit] Xiangfu: xc6slx9-csg324: fix the P13 pin label (master) http://qi-hw.com/p/kicad-libs/4d435f3 | 08:01 |
qi-bot | [commit] Werner Almesberger: poke/: move over from svn.openmoko.org/developers/werner/poke/ (master) http://qi-hw.com/p/wernermisc/355614b | 12:11 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ioscript/: script-based toggling of IO pins (for device testing) (master) http://qi-hw.com/p/ben-blinkenlights/025726e | 15:06 |
qi-bot | [commit] Werner Almesberger: add nmosfet-gsd (N-Channel MOSFET, G-S-D pin order) component (master) http://qi-hw.com/p/kicad-libs/a1f4f81 | 20:47 |
---|---|---|
qi-bot | [commit] Werner Almesberger: components/con.lib: fix typo "CD/DAT2" vs. "CD/DAT3" (master) http://qi-hw.com/p/kicad-libs/169136f | 20:47 |
qi-bot | [commit] Werner Almesberger: add Panasonic EVQQ7 "joystick" switch (master) http://qi-hw.com/p/kicad-libs/2ed2889 | 20:47 |
qi-bot | [commit] Paul Cercueil: Update to use the latest libopk API, and simplify loadPNG (packages) http://qi-hw.com/p/gmenu2x/8d96f3c | 21:47 |
qi-bot | [commit] Werner Almesberger: add 74x585 (shift register with latch and 3-state output) component (master) http://qi-hw.com/p/kicad-libs/fde85af | 02:35 |
---|---|---|
qi-bot | [commit] Werner Almesberger: modules/HIERARCHY: add BGA-324 (master) http://qi-hw.com/p/kicad-libs/e30f773 | 02:35 |
qi-bot | [commit] Werner Almesberger: modules/ssop.fpd: add TSSOP-16 (master) http://qi-hw.com/p/kicad-libs/a82eb0b | 02:35 |
qi-bot | [commit] Werner Almesberger: ircstat/stat: new option -a to also plot the last (partial) month (master) http://qi-hw.com/p/wernermisc/72db393 | 00:24 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ircstat/ML: update for 10/2012 (master) http://qi-hw.com/p/wernermisc/f87f0e6 | 00:24 |
qi-bot | [commit] Xiangfu: modules: bga: add 324 footprint (master) http://qi-hw.com/p/kicad-libs/87db425 | 04:19 |
---|---|---|
qi-bot | [commit] Werner Almesberger: modules/bga.fpd: make "row" a loop and use the "row" table only for lookups (master) http://qi-hw.com/p/kicad-libs/e5c8bd9 | 04:32 |
qi-bot | [commit] Werner Almesberger: modules/bga.fpd: don't draw outline Nr time. Once is plenty. (master) http://qi-hw.com/p/kicad-libs/ef5fb20 | 04:41 |
qi-bot | [commit] Xiangfu: bga.fpd: remove useless frames (master) http://qi-hw.com/p/kicad-libs/3d3be92 | 09:26 |
qi-bot | [commit] Xiangfu: uboot-xburst: split spl and usbboot patch (master) http://qi-hw.com/p/openwrt-xburst/cb2b6b5 | 01:21 |
---|---|---|
qi-bot | [commit] David Kühling: qemu-host: workaround for compile problem with latest openwrt (master) http://qi-hw.com/p/openwrt-packages/bafe658 | 03:23 |
qi-bot | [commit] David Kühling: qemu-host: fix compilation when ccache enabled (master) http://qi-hw.com/p/openwrt-packages/bf115de | 04:23 |
qi-bot | [commit] David Kühling: emacs: upgrade to version 23.4 plus various minor fixes (master) http://qi-hw.com/p/openwrt-packages/cc47920 | 04:23 |
qi-bot | [commit] Paul Cercueil: Save changes made on the link of an OPK on the user directory. (packages) http://qi-hw.com/p/gmenu2x/a04b9e3 | 04:31 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Memorize the selector's directory as the default one for later use (packages) http://qi-hw.com/p/gmenu2x/c94968f | 04:31 |
qi-bot | [commit] Paul Cercueil: Assign an icon for a given link only if it hasn't been done before (packages) http://qi-hw.com/p/gmenu2x/dec1a89 | 04:31 |
qi-bot | [commit] Paul Cercueil: Hide parameters not suitable for OPKs on the context menu (packages) http://qi-hw.com/p/gmenu2x/4c4f452 | 04:31 |
qi-bot | [commit] Paul Cercueil: Default the 'browser' option to 'true'. (packages) http://qi-hw.com/p/gmenu2x/64eb86f | 04:38 |
qi-bot | [commit] Paul Cercueil: Drop the 'remove link' option on the context menu of OPKs (packages) http://qi-hw.com/p/gmenu2x/df981eb | 04:48 |
qi-bot | [commit] Paul Cercueil: Fix a bug where having multiple MIME types would crash GMenu2X (packages) http://qi-hw.com/p/gmenu2x/b8112d1 | 14:17 |
qi-bot | [commit] Xiangfu: cgmienr: fix depends (master) http://qi-hw.com/p/openwrt-packages/a511011 | 14:26 |
qi-bot | [commit] Paul Cercueil: For non-OPK programs, chdir() to the app's directory as well (packages) http://qi-hw.com/p/gmenu2x/0b922e9 | 14:31 |
qi-bot | [commit] Xiangfu: ascii-paint: fix depends (master) http://qi-hw.com/p/openwrt-packages/2e44a43 | 14:33 |
qi-bot | [commit] Xiangfu: guile2: fix depends (master) http://qi-hw.com/p/openwrt-packages/45cd9dd | 15:08 |
qi-bot | [commit] Xiangfu: fpgatools: rename mini-jtag to fpgatools, include fp2bit/bit2fp (master) http://qi-hw.com/p/openwrt-packages/a295fd4 | 15:08 |
qi-bot | [commit] kyak: qball: use git repo (master) http://qi-hw.com/p/openwrt-packages/01e3c1f | 15:13 |
qi-bot | [commit] Xiangfu: dopewars: fix depends (master) http://qi-hw.com/p/openwrt-packages/b30b596 | 15:22 |
qi-bot | [commit] Xiangfu: nanonote-files: update fw_env.config with new bootloader configure (master) http://qi-hw.com/p/openwrt-packages/91b5bd4 | 16:25 |
qi-bot | [commit] Xiangfu: qi_lb60: add ks7010 support (release_2012-10-11) http://qi-hw.com/p/openwrt-xburst/3f62494 | 14:02 |
---|---|---|
qi-bot | [commit] Xiangfu: qi_lb60: add ks7010 support (master) http://qi-hw.com/p/openwrt-xburst/c3be281 | 14:02 |
qi-bot | [commit] Paul Cercueil: Hide the 'params' option from the user on the contextual menu (packages) http://qi-hw.com/p/gmenu2x/0fc6ac6 | 21:38 |
qi-bot | [commit] Paul Cercueil: Use the '%f' token to insert the selected file on the params. (packages) http://qi-hw.com/p/gmenu2x/e7e21b4 | 21:38 |
qi-bot | [commit] Paul Cercueil: Build file extensions filter from the MIME types present on the OPK (packages) http://qi-hw.com/p/gmenu2x/5f1cff6 | 21:38 |
qi-bot | [commit] Xiangfu: nanonote-files: config.minimal: enable image builder (master) http://qi-hw.com/p/openwrt-packages/6b9c907 | 10:54 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Before launching any app, update the standard I/O file descriptors (packages) http://qi-hw.com/p/gmenu2x/d6cdb90 | 15:32 |
qi-bot | [commit] kyak: kexecboot: update to latest git (master) http://qi-hw.com/p/openwrt-packages/3929033 | 04:00 |
---|---|---|
qi-bot | [commit] kyak: Merge branch 'master' of projects.qi-hardware.com:openwrt-packages (master) http://qi-hw.com/p/openwrt-packages/c9e1704 | 04:00 |
qi-bot | [commit] kyak: qt4: disable some packages (master) http://qi-hw.com/p/openwrt-packages/6357ebc | 16:59 |
qi-bot | [commit] Paul Cercueil: Removed unused class variable 'useRamTimings' from LinkApp (packages) http://qi-hw.com/p/gmenu2x/c1a95a2 | 21:46 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Add "editable" parameter: when "false", the link can't be modified. (packages) http://qi-hw.com/p/gmenu2x/170a7dc | 21:46 |
qi-bot | [commit] Paul Cercueil: Dingux: set all the system links (except Terminal) as non-editable (packages) http://qi-hw.com/p/gmenu2x/79ea234 | 21:46 |
qi-bot | [commit] Paul Cercueil: Fix icon not appearing on loading menu of OPK packages based links (packages) http://qi-hw.com/p/gmenu2x/0ddc562 | 21:46 |
qi-bot | [commit] Paul Cercueil: Update "exec" to aim the binary if a change of directory if needed (packages) http://qi-hw.com/p/gmenu2x/6a9f429 | 21:46 |
qi-bot | [commit] Xiangfu: mplayer disable libgsm (master) http://qi-hw.com/p/openwrt-packages/e0f74ab | 02:16 |
---|---|---|
qi-bot | [commit] Xiangfu: libggi: fix depends (master) http://qi-hw.com/p/openwrt-packages/5faa9e4 | 02:16 |
qi-bot | [commit] Xiangfu: mplayer: fix deps (master) http://qi-hw.com/p/openwrt-packages/fe641a3 | 03:12 |
qi-bot | [commit] kyak: keymouse: update dl method, drop patches (master) http://qi-hw.com/p/openwrt-packages/ed585eb | 08:19 |
---|---|---|
qi-bot | [commit] kyak: mplayer:depends on libmpg123 if BUILD_PATENTED (master) http://qi-hw.com/p/openwrt-packages/b5a00a3 | 08:47 |
qi-bot | [commit] Xiangfu: avrdude: fix depends (master) http://qi-hw.com/p/openwrt-packages/6a2b914 | 11:12 |
qi-bot | [commit] Xiangfu: nanonote-files: mtd.nn: improvement on mount (master) http://qi-hw.com/p/openwrt-packages/f7f72e3 | 14:05 |
qi-bot | [commit] Xiangfu: qi_lb60: unset SENSORS_JZ4740 (master) http://qi-hw.com/p/openwrt-xburst/b15f278 | 03:04 |
---|---|---|
qi-bot | [commit] kyak: mpg123: fix missing deps (master) http://qi-hw.com/p/openwrt-packages/1d20277 | 06:30 |
qi-bot | [commit] kyak: gmu: update to 0.8.0 (master) http://qi-hw.com/p/openwrt-packages/0009b7c | 06:30 |
qi-bot | [commit] kyak: add 6x10 font for setfont (master) http://qi-hw.com/p/openwrt-packages/a8915f7 | 07:54 |
qi-bot | [commit] kyak: update startup script for nanonote (master) http://qi-hw.com/p/gmenu2x/c302218 | 08:08 |
qi-bot | [commit] kyak: Update ash gmenu2x icon to use 6x10 font (master) http://qi-hw.com/p/openwrt-packages/2845ec7 | 08:41 |
qi-bot | [commit] kyak: gmenu2x: update to latest version (master) http://qi-hw.com/p/openwrt-packages/7c7db42 | 08:41 |
qi-bot | [commit] kyak: Add kernel 6x10 font (master) http://qi-hw.com/p/setfont2/1284c1e | 11:40 |
qi-bot | [commit] kyak: Add source png file for kernel 6x10 font (master) http://qi-hw.com/p/setfont2/37afb1a | 11:53 |
qi-bot | [commit] kyak: uboot-xburst: fix dl url, add md5sum (master) http://qi-hw.com/p/openwrt-xburst/490004f | 07:26 |
---|
qi-bot | [commit] kyak: config.full_system: disable qt4-drivers-mouse-tslibmousedriver (master) http://qi-hw.com/p/openwrt-packages/e2c6b99 | 05:01 |
---|---|---|
qi-bot | [commit] kyak: aewan: fix missing dependency (master) http://qi-hw.com/p/openwrt-packages/900e61a | 05:01 |
qi-bot | [commit] kyak: alsa-lib: fix missing dependencies (master) http://qi-hw.com/p/openwrt-packages/bcea1d4 | 05:07 |
qi-bot | [commit] kyak: liballegro-utils: fix missing deps (master) http://qi-hw.com/p/openwrt-packages/0a3529e | 05:14 |
qi-bot | [commit] kyak: ase: fix missing dependency (master) http://qi-hw.com/p/openwrt-packages/896375b | 05:27 |
qi-bot | [commit] kyak: libzip: now in upstream openwrt (master) http://qi-hw.com/p/openwrt-packages/cb4f985 | 05:39 |
qi-bot | [commit] kyak: catdoc: update download url (master) http://qi-hw.com/p/openwrt-packages/d068460 | 06:08 |
qi-bot | [commit] kyak: centerim: fix missing deps (master) http://qi-hw.com/p/openwrt-packages/39c6d86 | 06:30 |
qi-bot | [commit] kyak: climm: add missing dependency (master) http://qi-hw.com/p/openwrt-packages/2e79041 | 06:45 |
qi-bot | [commit] kyak: centerim5: update to latest git, add translation files (master) http://qi-hw.com/p/openwrt-packages/e6ca5ea | 07:04 |
qi-bot | [commit] kyak: config.full_system: add centerim5 (master) http://qi-hw.com/p/openwrt-packages/2b84973 | 07:04 |
qi-bot | [commit] kyak: libpurple: update to 2.10.6 (master) http://qi-hw.com/p/openwrt-packages/aa40dd3 | 07:04 |
qi-bot | [commit] kyak: cxxtools: add missing deps (master) http://qi-hw.com/p/openwrt-packages/aa85997 | 07:15 |
qi-bot | [commit] kyak: fbida: fix missing deps (master) http://qi-hw.com/p/openwrt-packages/74c8869 | 07:35 |
qi-bot | [commit] kyak: gcal: fixing missing dependency (master) http://qi-hw.com/p/openwrt-packages/ea2d93f | 07:42 |
qi-bot | [commit] kyak: gnuchess: add missing deps (master) http://qi-hw.com/p/openwrt-packages/9ea8452 | 08:08 |
qi-bot | [commit] Xiangfu: gforth: fix 'bash: +make: command not found', more info: https://dev.openwrt.org/changeset/33523 (master) http://qi-hw.com/p/openwrt-packages/1e9f2d2 | 08:14 |
qi-bot | [commit] kyak: gnuplot-gfx: fix missing deps (master) http://qi-hw.com/p/openwrt-packages/17006a2 | 08:20 |
qi-bot | [commit] kyak: jbig2dec: add missing deps (master) http://qi-hw.com/p/openwrt-packages/9669f66 | 09:31 |
qi-bot | [commit] kyak: ikog: fix dl url (master) http://qi-hw.com/p/openwrt-packages/cb5dc98 | 09:40 |
qi-bot | [commit] kyak: libgc: add missing deps (master) http://qi-hw.com/p/openwrt-packages/7d7b76c | 10:05 |
qi-bot | [commit] kyak: mcabber: add missing dep (master) http://qi-hw.com/p/openwrt-packages/3e9c1e8 | 10:46 |
qi-bot | [commit] kyak: libggi: fix missing dep (master) http://qi-hw.com/p/openwrt-packages/c03fef4 | 10:46 |
qi-bot | [commit] kyak: netsurf libs: update dl urls (master) http://qi-hw.com/p/openwrt-packages/ff92cbb | 10:47 |
qi-bot | [commit] kyak: mplayer: add missing dep (master) http://qi-hw.com/p/openwrt-packages/674e23b | 11:59 |
qi-bot | [commit] kyak: mupdf: update dl url (master) http://qi-hw.com/p/openwrt-packages/7632204 | 12:14 |
qi-bot | [commit] kyak: ncmpc: fix missing deps (master) http://qi-hw.com/p/openwrt-packages/c71bdca | 13:05 |
qi-bot | [commit] kyak: ne: bump version (master) http://qi-hw.com/p/openwrt-packages/dfc4ca6 | 13:09 |
qi-bot | [commit] kyak: nethack: fix missing deps (master) http://qi-hw.com/p/openwrt-packages/4209529 | 13:19 |
qi-bot | [commit] kyak: netsurf: update dl url (master) http://qi-hw.com/p/openwrt-packages/f12a381 | 13:46 |
qi-bot | [commit] kyak: octave: update dl url (master) http://qi-hw.com/p/openwrt-packages/9b29c23 | 13:50 |
qi-bot | [commit] kyak: octave: add missing deps (master) http://qi-hw.com/p/openwrt-packages/706b268 | 17:03 |
qi-bot | [commit] kyak: pygame: fix missing deps (master) http://qi-hw.com/p/openwrt-packages/615308e | 17:33 |
qi-bot | [commit] kyak: qball: update to version 1.4 (master) http://qi-hw.com/p/openwrt-packages/3e39065 | 17:41 |
qi-bot | [commit] kyak: quickcalc: update to version 1.28 (master) http://qi-hw.com/p/openwrt-packages/3612517 | 17:44 |
qi-bot | [commit] kyak: sdcv: fix dl url and deps (master) http://qi-hw.com/p/openwrt-packages/73b7cbc | 17:51 |
qi-bot | [commit] kyak: supertux: fix missing deps (master) http://qi-hw.com/p/openwrt-packages/b0be67f | 18:01 |
qi-bot | [commit] kyak: tempest-for-eliza: fix missing deps (master) http://qi-hw.com/p/openwrt-packages/b2172c6 | 18:03 |
qi-bot | [commit] kyak: units: fix missing deps (master) http://qi-hw.com/p/openwrt-packages/4ecd78c | 18:52 |
qi-bot | [commit] kyak: vitetris: fix missing deps (master) http://qi-hw.com/p/openwrt-packages/370a498 | 18:54 |
qi-bot | [commit] kyak: w3m: fix missing deps (master) http://qi-hw.com/p/openwrt-packages/08ed344 | 18:57 |
qi-bot | [commit] kyak: xz: fix missing deps (master) http://qi-hw.com/p/openwrt-packages/f80247e | 19:02 |
qi-bot | [commit] nbd: lua: enable parallel builds (master) http://qi-hw.com/p/openwrt-xburst/4d84131 | 10:11 |
---|---|---|
qi-bot | [commit] florian: [package] base-files: skip LEDs handled by rssileds in led init-script (master) http://qi-hw.com/p/openwrt-xburst/8bbe39a | 10:11 |
qi-bot | [commit] florian: [ar7] generate vmlinux.srec and vmlinux.bin from srec2bin (master) http://qi-hw.com/p/openwrt-xburst/c8c0e0c | 10:11 |
qi-bot | [commit] kaloz: [cns3xxx]: fix non terminated uart resources for laguna (master) http://qi-hw.com/p/openwrt-xburst/6c1258a | 10:11 |
qi-bot | [commit] kaloz: The Gateworks System Controller (GSC) is an i2c device that provides system (master) http://qi-hw.com/p/openwrt-xburst/228bf4d | 10:11 |
qi-bot | [commit] kaloz: [cns3xxx]: fix (really this time) laguna UART config (master) http://qi-hw.com/p/openwrt-xburst/b2305bd | 10:11 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: update to 2010.06 (master) http://qi-hw.com/p/openwrt-xburst/a79283a | 10:11 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: enable-silent-console.patch (master) http://qi-hw.com/p/openwrt-xburst/33d9b4c | 10:11 |
qi-bot | [commit] Xiangfu Liu: uboot silent console (master) http://qi-hw.com/p/openwrt-xburst/0bc736c | 10:11 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: change load kernel size (master) http://qi-hw.com/p/openwrt-xburst/7e159dc | 10:11 |
qi-bot | [commit] Xiangfu: xburst: add WPAN support (master) http://qi-hw.com/p/openwrt-xburst/2ed90f6 | 10:11 |
qi-bot | [commit] Xiangfu Liu: add WPAN(atben,atusb) kernel module file thansk blogic #qi-hardware @freenode.net (master) http://qi-hw.com/p/openwrt-xburst/32b4b06 | 10:11 |
qi-bot | [commit] Xiangfu: xburst qi_lb60 disable WPAN kernel options, should build as module (master) http://qi-hw.com/p/openwrt-xburst/8040387 | 10:11 |
qi-bot | [commit] Xiangfu: xburst: add Ben NanoNote kernel logo (master) http://qi-hw.com/p/openwrt-xburst/875b421 | 10:11 |
qi-bot | [commit] Xiangfu: xburst: qi_lb60 select the nanonote slash screen (master) http://qi-hw.com/p/openwrt-xburst/07a3c5d | 10:11 |
qi-bot | [commit] Xiangfu: WPAN kernel module: make atusb depends on at86rf230 (master) http://qi-hw.com/p/openwrt-xburst/f6662d1 | 10:11 |
qi-bot | [commit] Xiangfu: WPAN: fix atusb cannot build as module (master) http://qi-hw.com/p/openwrt-xburst/ce4eb6a | 10:11 |
qi-bot | [commit] Xiangfu: WPAN: wpan.mk: fix typo, add other IEE802154 device to WPAN subment (master) http://qi-hw.com/p/openwrt-xburst/381aece | 10:11 |
qi-bot | [commit] Xiangfu: xburst: ben nanonote: add modifire keys and fbcon-color patches (master) http://qi-hw.com/p/openwrt-xburst/a53d7e8 | 10:11 |
qi-bot | [commit] Xiangfu: uboot-xburst: update to v2012.10-rc2 (master) http://qi-hw.com/p/openwrt-xburst/af862e9 | 10:11 |
qi-bot | [commit] Xiangfu: nanonote-files: remove outdate feeds.conf (master) http://qi-hw.com/p/openwrt-packages/54915fa | 11:22 |
qi-bot | [commit] kyak: unset CONFIG_IEEE802154_6LOWPAN (master) http://qi-hw.com/p/openwrt-xburst/0c9426f | 11:55 |
qi-bot | [commit] Marcos Paulo de Souza: media/radio/radio-rda5807.c: Use devm_* when allocating memory (jz-3.6) http://qi-hw.com/p/qi-kernel/dbd96db | 22:52 |
qi-bot | [commit] Marcos Paulo de Souza: media/radio/radio-rda5807: Use module_i2c_driver instead of module_{init|exit} (jz-3.6) http://qi-hw.com/p/qi-kernel/a96c584 | 22:52 |
qi-bot | [commit] Marcos Paulo de Souza: media/radio/radio-rda5807.c: Wait for seek complete before return (jz-3.6) http://qi-hw.com/p/qi-kernel/7b4d427 | 22:52 |
qi-bot | [commit] Xiangfu: uboot-xburst: update to v2012.10-rc2 (master) http://qi-hw.com/p/openwrt-xburst/1079647 | 16:24 |
---|
qi-bot | [commit] Xiangfu: debian: regular update (master) http://qi-hw.com/p/fped/9ab9ae6 | 03:09 |
---|---|---|
qi-bot | [commit] Xiangfu: move debian/* to https://github.com/xiangfu/deb-pkg/ (master) http://qi-hw.com/p/fped/d59b472 | 03:09 |
qi-bot | [commit] Tushar Behera: pwm: Fix compilation error when CONFIG_PWM is not defined (jz-3.6) http://qi-hw.com/p/qi-kernel/7220711 | 16:37 |
qi-bot | [commit] Thierry Reding: pwm: Get rid of HAVE_PWM (jz-3.6) http://qi-hw.com/p/qi-kernel/90bf225 | 16:37 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: qi_lb60: Update defconfig (jz-3.6) http://qi-hw.com/p/qi-kernel/6395c34 | 16:41 |
qi-bot | [commit] Xiangfu: debian: cleanup on control file (master) http://qi-hw.com/p/fped/d2daaf8 | 02:56 |
---|---|---|
qi-bot | [commit] Xiangfu: debian: cleanup changelog, include debian build flags (master) http://qi-hw.com/p/fped/d76f7d1 | 03:48 |
qi-bot | [commit] Xiangfu: transfer build flags from outside (master) http://qi-hw.com/p/fped/5b21495 | 04:12 |
qi-bot | [commit] Paul Cercueil: Fix a bug where only some parameters were read from the links files. (packages) http://qi-hw.com/p/gmenu2x/876f2cf | 06:20 |
qi-bot | [commit] Paul Cercueil: Update to use the latest libopk API. (packages) http://qi-hw.com/p/gmenu2x/909fef2 | 06:20 |
qi-bot | [commit] Paul Cercueil: Mount the OPK packages in order to execute the binary included. (packages) http://qi-hw.com/p/gmenu2x/f6c19d0 | 06:20 |
qi-bot | [commit] Paul Cercueil: Fix build when libopk is not present. (packages) http://qi-hw.com/p/gmenu2x/ef18841 | 17:44 |
qi-bot | [commit] Paul Cercueil: configure.in: update libopk check to match latest libopk API (packages) http://qi-hw.com/p/gmenu2x/c58c726 | 17:49 |
qi-bot | [commit] Paul Cercueil: Load the OPK in the section defined by their "Categories" parameter (packages) http://qi-hw.com/p/gmenu2x/4a60aa0 | 23:42 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: A320: defconfig: Enable RNDIS support in cdcether driver (jz-3.5) http://qi-hw.com/p/qi-kernel/67aaee4 | 16:15 |
---|---|---|
qi-bot | [commit] Paul Cercueil: menu.cpp: Don't use stat() to know if a FS entry is a directory (packages) http://qi-hw.com/p/gmenu2x/3dc12d0 | 19:49 |
qi-bot | [commit] Paul Cercueil: configure.in: Perform a check for the 'libopk' library. (packages) http://qi-hw.com/p/gmenu2x/45be8af | 19:49 |
qi-bot | [commit] Paul Cercueil: Make loadPNG() able to read files from OPK packages. (packages) http://qi-hw.com/p/gmenu2x/0cbb5ee | 19:49 |
qi-bot | [commit] Paul Cercueil: If a filename contains '#' don't check if the file exists. (packages) http://qi-hw.com/p/gmenu2x/e3837fc | 19:49 |
qi-bot | [commit] Paul Cercueil: LinkApp: Added support for reading OPK packages. (packages) http://qi-hw.com/p/gmenu2x/61d22e2 | 19:49 |
qi-bot | [commit] Paul Cercueil: During init, load all packages in CARD_ROOT/*/apps (packages) http://qi-hw.com/p/gmenu2x/cd48093 | 19:49 |
qi-bot | [commit] Paul Cercueil: menu.cpp: Don't use stat() to know if a FS entry is a directory (master) http://qi-hw.com/p/gmenu2x/4070644 | 15:40 |
---|
qi-bot | [commit] Xiangfu: debian: update email address (master) http://qi-hw.com/p/fped/42a4ade | 08:05 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ircstat/ML: update for 7/2012 through 9/2012 (master) http://qi-hw.com/p/wernermisc/8fc01a1 | 13:51 |
qi-bot | [commit] Bas Wijnen: use automake (master) http://qi-hw.com/p/iris/d9a1222 | 20:20 |
---|---|---|
qi-bot | [commit] Bas Wijnen: usb boot working again (master) http://qi-hw.com/p/iris/223ed86 | 20:20 |
qi-bot | [commit] Xiangfu: debian: update maintainer email. prepare for my DM application (master) http://qi-hw.com/p/fped/dfac631 | 02:59 |
---|---|---|
qi-bot | [commit] Xiangfu: debian: update snapshot commit (master) http://qi-hw.com/p/fped/598272f | 03:02 |
qi-bot | [commit] Xiangfu: debian: minor changes, update email address, update default original source version (master) http://qi-hw.com/p/xburst-tools/a60032e | 03:19 |
qi-bot | [commit] Mark Brown: ASoC: core: Try to use regmap if the driver doesn't set up any I/O (jz-3.5) http://qi-hw.com/p/qi-kernel/90ff125 | 17:20 |
---|---|---|
qi-bot | [commit] Mark Brown: ASoC: core: Fix check before defaulting to regmap (jz-3.5) http://qi-hw.com/p/qi-kernel/82a40fe | 17:20 |
qi-bot | [commit] Mark Brown: ASoC: io: Use dev_get_regmap() if driver doesn't provide a regmap (jz-3.5) http://qi-hw.com/p/qi-kernel/c21575f | 17:20 |
qi-bot | [commit] Lars-Peter Clausen: ASoC: jz4740: Use regmap (jz-3.5) http://qi-hw.com/p/qi-kernel/d8b0b5c | 17:20 |
qi-bot | [commit] Lars-Peter Clausen: ili8960: Use module_spi_driver (jz-3.5) http://qi-hw.com/p/qi-kernel/5b8a660 | 18:55 |
---|---|---|
qi-bot | [commit] Lars-Peter Clausen: ili8960: Use devm_kzalloc (jz-3.5) http://qi-hw.com/p/qi-kernel/3d14a72 | 18:55 |
qi-bot | [commit] Lars-Peter Clausen: ili8960: Use kstrtoul (jz-3.5) http://qi-hw.com/p/qi-kernel/0a0a2d0 | 18:55 |
qi-bot | [commit] Lars-Peter Clausen: ASoC: jz4740: Use devm_request_and_ioremap (jz-3.5) http://qi-hw.com/p/qi-kernel/ca86dff | 18:55 |
qi-bot | [commit] Lars-Peter Clausen: ASoC: JZ4740: Add TLV information (jz-3.5) http://qi-hw.com/p/qi-kernel/c6ebd3d | 20:27 |
---|---|---|
qi-bot | [commit] Paul Cercueil: RTC: JZ4740: Init the "regulator" register on startup. (jz-3.5) http://qi-hw.com/p/qi-kernel/5afecbf | 22:15 |
qi-bot | [commit] Xiangfu: cgminer: update to 2.7.5 (master) http://qi-hw.com/p/openwrt-packages/8e9f392 | 15:43 |
---|---|---|
qi-bot | [commit] Xiangfu: avrdude: update to 5.11.1, update ben-blinkenlights patches (master) http://qi-hw.com/p/openwrt-packages/bde99a8 | 15:43 |
qi-bot | [commit] Xiangfu: avrdude: add depends libftdi (master) http://qi-hw.com/p/openwrt-packages/bfd8472 | 15:43 |
qi-bot | [commit] Xiangfu: new pacakge: mini-jtag (master) http://qi-hw.com/p/openwrt-packages/56f85bc | 13:20 |
---|---|---|
qi-bot | [commit] Xiangfu: mini-jtag: forget create dest folder (master) http://qi-hw.com/p/openwrt-packages/fb1e28f | 14:24 |
qi-bot | [commit] Xiangfu: files for compile MR11U as nanonote wifi gadget (master) http://qi-hw.com/p/openwrt-packages/7ff0223 | 02:23 |
---|---|---|
qi-bot | [commit] juhosg: ramips: make built-in switch transparent for ALL0256N and ALL5002 (master) http://qi-hw.com/p/openwrt-xburst/c4ce5d3 | 02:27 |
qi-bot | [commit] juhosg: iwinfo: add hwinfo of AR9280 2T2R PCIe (master) http://qi-hw.com/p/openwrt-xburst/741e00a | 02:27 |
qi-bot | [commit] juhosg: ramips: add kmod-usb-ohci to defaults packages in profile of ALL5002 (master) http://qi-hw.com/p/openwrt-xburst/0802aef | 02:27 |
qi-bot | [commit] juhosg: ar71xx: add RSSI LEDs of ALL0315N to uci-defaults/leds (master) http://qi-hw.com/p/openwrt-xburst/ddc3f6e | 02:27 |
qi-bot | [commit] juhosg: ar71xx: all0315n: fix ethernet according to vendor info (master) http://qi-hw.com/p/openwrt-xburst/32b0679 | 02:27 |
qi-bot | [commit] juhosg: Revert "ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240" (master) http://qi-hw.com/p/openwrt-xburst/311f77f | 02:27 |
qi-bot | [commit] nbd: hostapd: fix ap+sta issues (master) http://qi-hw.com/p/openwrt-xburst/1f8154c | 02:27 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: update to 2010.06 (master) http://qi-hw.com/p/openwrt-xburst/4759009 | 02:27 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: enable-silent-console.patch (master) http://qi-hw.com/p/openwrt-xburst/2b85655 | 02:27 |
qi-bot | [commit] Xiangfu Liu: uboot silent console (master) http://qi-hw.com/p/openwrt-xburst/0611cc3 | 02:27 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: change load kernel size (master) http://qi-hw.com/p/openwrt-xburst/8d2d9e9 | 02:27 |
qi-bot | [commit] Xiangfu: xburst: add WPAN support (master) http://qi-hw.com/p/openwrt-xburst/3638082 | 02:27 |
qi-bot | [commit] Xiangfu Liu: add WPAN(atben,atusb) kernel module file thansk blogic #qi-hardware @freenode.net (master) http://qi-hw.com/p/openwrt-xburst/95645c6 | 02:27 |
qi-bot | [commit] Xiangfu: xburst qi_lb60 disable WPAN kernel options, should build as module (master) http://qi-hw.com/p/openwrt-xburst/cdd24f2 | 02:27 |
qi-bot | [commit] Xiangfu: xburst: add Ben NanoNote kernel logo (master) http://qi-hw.com/p/openwrt-xburst/04dd0db | 02:27 |
qi-bot | [commit] Xiangfu: xburst: qi_lb60 select the nanonote slash screen (master) http://qi-hw.com/p/openwrt-xburst/fb28d65 | 02:27 |
qi-bot | [commit] Xiangfu: WPAN kernel module: make atusb depends on at86rf230 (master) http://qi-hw.com/p/openwrt-xburst/7e465ba | 02:27 |
qi-bot | [commit] Xiangfu: WPAN: fix atusb cannot build as module (master) http://qi-hw.com/p/openwrt-xburst/fd014bd | 02:27 |
qi-bot | [commit] Xiangfu: WPAN: wpan.mk: fix typo, add other IEE802154 device to WPAN subment (master) http://qi-hw.com/p/openwrt-xburst/b71b315 | 02:27 |
qi-bot | [commit] Xiangfu: xburst: ben nanonote: add modifire keys and fbcon-color patches (master) http://qi-hw.com/p/openwrt-xburst/970f0a8 | 02:27 |
qi-bot | [commit] Xiangfu: nanonote-files config.minimal: add base files (master) http://qi-hw.com/p/openwrt-packages/69317f8 | 05:31 |
qi-bot | [commit] Marcos Paulo de Souza: MIPS: JZ4770: SLCD: Use SIMPLE_DEV_PM_OPS instead of dev_pm_ops (jz-3.5) http://qi-hw.com/p/qi-kernel/c19956e | 04:59 |
---|
qi-bot | [commit] Paul Cercueil: MIPS: JZ4740: SLCD: Rely on jzfb->tv_out instead of detecting TV-out state. (jz-3.4) http://qi-hw.com/p/qi-kernel/3a629d3 | 17:52 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Merge branch 'jz-3.4' of projects.qi-hardware.com:qi-kernel into jz-3.4 (jz-3.4) http://qi-hw.com/p/qi-kernel/4cdf25b | 17:52 |
qi-bot | [commit] Marcos Paulo de Souza: media: radio: RDA5807: Sleep 0.5s after chip enable (jz-3.5) http://qi-hw.com/p/qi-kernel/cc31bcc | 17:52 |
qi-bot | [commit] Paul Cercueil: MIPS: JZ4740: SLCD: Rely on jzfb->tv_out instead of detecting TV-out state. (jz-3.5) http://qi-hw.com/p/qi-kernel/0ba1f08 | 18:35 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: A320: Hardcode GPIO I2C bus number (jz-3.5) http://qi-hw.com/p/qi-kernel/62d5a4c | 20:07 |
qi-bot | [commit] Werner Almesberger: cameo/templates/mkmk-simple: also look for new <name>-NPTH.drl (master) http://qi-hw.com/p/cae-tools/e246127 | 02:03 |
---|
qi-bot | [commit] Werner Almesberger: cameo/: new command "flip" to flip paths on the X or Y axis (master) http://qi-hw.com/p/cae-tools/a030eff | 12:05 |
---|
qi-bot | [commit] Werner Almesberger: poly2d/: try to work around spurious aborts in CGAL::create_interior_skeleton_and_offset_polygons_with_holes_2 (master) http://qi-hw.com/p/cae-tools/53fe709 | 16:53 |
---|---|---|
qi-bot | [commit] Werner Almesberger: cameo/fped2d2z.pl: new option -t Zmax to set the height of the workpiece (master) http://qi-hw.com/p/cae-tools/c73509d | 16:53 |
qi-bot | [commit] Werner Almesberger: modules/: add E-SWITCH series 320 tact switch (master) http://qi-hw.com/p/kicad-libs/92b9391 | 19:34 |
qi-bot | [commit] Werner Almesberger: layer.c (pad_type_to_layers): fix harmless typo (master) http://qi-hw.com/p/fped/7c037ae | 05:15 |
---|---|---|
qi-bot | [commit] Werner Almesberger: add experimental reload feature (master) http://qi-hw.com/p/fped/8982d09 | 05:15 |
qi-bot | [commit] Werner Almesberger: gui_frame.c: allow scrolling through packages also on the name template (master) http://qi-hw.com/p/fped/23a3348 | 05:15 |
qi-bot | [commit] Xiangfu: cgminer: update to 2.5.0 (master) http://qi-hw.com/p/openwrt-packages/5fb69ba | 03:08 |
---|---|---|
qi-bot | [commit] Xiangfu: pygame: fix build error. thanks to paul_boddie (master) http://qi-hw.com/p/openwrt-packages/939a741 | 03:08 |
qi-bot | [commit] Werner Almesberger: modules/: add PAD_S_120x120; correct classification of PAD_S_150x150 (master) http://qi-hw.com/p/kicad-libs/d37268a | 11:51 |
---|
qi-bot | [commit] Werner Almesberger: components/EXPAND: rename to HIERARCHY (master) http://qi-hw.com/p/kicad-libs/1e22d3e | 00:28 |
---|---|---|
qi-bot | [commit] Werner Almesberger: scripts/missing-in-tree: fix -L dir; clean up use of extension (master) http://qi-hw.com/p/kicad-libs/8f80a59 | 00:28 |
qi-bot | [commit] Werner Almesberger: components/HIERARCHY: add XC6SLXN-TQG144 (master) http://qi-hw.com/p/kicad-libs/937d55f | 00:28 |
qi-bot | [commit] Werner Almesberger: components/: add ATtiny87/167 (in dual-in-line packages, i.e., TSSOP and SIOC) (master) http://qi-hw.com/p/kicad-libs/01a34a8 | 00:28 |
qi-bot | [commit] Werner Almesberger: modules/zx62m-b-5p.fpd: add Y size of rear pads (master) http://qi-hw.com/p/kicad-libs/932e5aa | 23:31 |
---|---|---|
qi-bot | [commit] Werner Almesberger: modules/zx62-b-5pa.fpd: Hirose ZX62-B-5PA micro-USB B receptacle, std, no posts (master) http://qi-hw.com/p/kicad-libs/707aa70 | 23:31 |
qi-bot | [commit] Werner Almesberger: modules/INFO: add resources for ZX62-B-5PA and ZX62M-B-5P (master) http://qi-hw.com/p/kicad-libs/26307b3 | 23:31 |
qi-bot | [commit] Werner Almesberger: bacon/prog/Makefile: remove references to C2, inherited from f32xbase (master) http://qi-hw.com/p/wernermisc/7fe9ae1 | 13:04 |
---|
qi-bot | [commit] Werner Almesberger: Makefile: also run make for components/, since we now have gencon.lib (master) http://qi-hw.com/p/kicad-libs/a39861b | 15:00 |
---|
qi-bot | [commit] Werner Almesberger: fisl2012/: belatedly fix typo and coloring (master) http://qi-hw.com/p/wernermisc/1c338d6 | 17:48 |
---|
qi-bot | [commit] Werner Almesberger: fisl2012/all.fig: fix and clarify genkicat use (master) http://qi-hw.com/p/wernermisc/4af6a64 | 11:58 |
---|---|---|
qi-bot | [commit] Werner Almesberger: fisl2012/: text cleanup (master) http://qi-hw.com/p/wernermisc/a4a651e | 11:58 |
qi-bot | [commit] Werner Almesberger: fisl2012/all.fig: add dsv (master) http://qi-hw.com/p/wernermisc/ec69e40 | 11:58 |
qi-bot | [commit] Werner Almesberger: fisl2012/: clarify that symbols come from the component editor (master) http://qi-hw.com/p/wernermisc/bc00808 | 11:58 |
qi-bot | [commit] Werner Almesberger: fisl2012/: some small improvements; made BOOM slide more useful (master) http://qi-hw.com/p/wernermisc/89af0a3 | 16:21 |
qi-bot | [commit] Werner Almesberger: fisl2012/: last fixes and a bit of trimming (master) http://qi-hw.com/p/wernermisc/c071629 | 20:49 |
qi-bot | [commit] Paul Cercueil: MIPS: A320: correct partition table. (jz-3.5) http://qi-hw.com/p/qi-kernel/2ffeb01 | 14:28 |
---|---|---|
qi-bot | [commit] Paul Cercueil: MIPS: A320: do not mark the partitions as read-only. (jz-3.5) http://qi-hw.com/p/qi-kernel/9f3a0a5 | 14:28 |
qi-bot | [commit] Paul Cercueil: MIPS: A320: Enable support for UBI. (jz-3.5) http://qi-hw.com/p/qi-kernel/dbdaf6c | 14:28 |
qi-bot | [commit] Paul Cercueil: Enable support for UBIFS (UBI filesystem). (jz-3.5) http://qi-hw.com/p/qi-kernel/7b39487 | 14:28 |
qi-bot | [commit] Paul Cercueil: MIPS: A320: Don't override bootloader arguments. (jz-3.5) http://qi-hw.com/p/qi-kernel/69ffbc9 | 14:28 |
qi-bot | [commit] Werner Almesberger: fisl2012/: add kicad layout diagram (master) http://qi-hw.com/p/wernermisc/4edc0da | 15:46 |
qi-bot | [commit] Werner Almesberger: bin/gg: moved over from svn.openmoko.org/developers/werner/bin/gg (master) http://qi-hw.com/p/wernermisc/f44032e | 15:46 |
qi-bot | [commit] Werner Almesberger: fisl2012/: more work on text (master) http://qi-hw.com/p/wernermisc/d177bf8 | 21:29 |
qi-bot | [commit] Werner Almesberger: fisl2012/: add overview (master) http://qi-hw.com/p/wernermisc/f33c0da | 21:29 |
qi-bot | [commit] Werner Almesberger: fisl2012/: remove BOOM data flow; clean up intro slide (master) http://qi-hw.com/p/wernermisc/ed3b74f | 21:29 |
qi-bot | [commit] Werner Almesberger: fisl2012/all.fig: various small corrections (master) http://qi-hw.com/p/wernermisc/da7b546 | 21:43 |
qi-bot | [commit] Paul Cercueil: fbcon: update documentation for the "bind" parameter. (jz-3.5) http://qi-hw.com/p/qi-kernel/e46b4fc | 13:54 |
---|---|---|
qi-bot | [commit] Werner Almesberger: fisl2012/: fix some typos (master) http://qi-hw.com/p/wernermisc/c52e2b9 | 18:33 |
qi-bot | [commit] Werner Almesberger: fisl2012/: add kicad schematics diagram; trim Makefile (master) http://qi-hw.com/p/wernermisc/d5a0a83 | 18:33 |
qi-bot | [commit] Werner Almesberger: fisl2012/: add kicad cvpcb diagram (master) http://qi-hw.com/p/wernermisc/2fc3b97 | 20:23 |
qi-bot | [commit] Werner Almesberger: fisl2012/: first outline of FISL13 talk; abstract and biography (master) http://qi-hw.com/p/wernermisc/cd80647 | 07:56 |
---|---|---|
qi-bot | [commit] Werner Almesberger: fisl2012/: editing (more to come) (master) http://qi-hw.com/p/wernermisc/83c0891 | 07:56 |
qi-bot | [commit] Werner Almesberger: fisl2012/talk.tex: shorten URLs with tiny.cc (master) http://qi-hw.com/p/wernermisc/858ef9f | 07:56 |
qi-bot | [commit] Werner Almesberger: fisl2012/: on-going editing (first drawings, more links, some small changes) (master) http://qi-hw.com/p/wernermisc/e342b7a | 07:56 |
qi-bot | [commit] Werner Almesberger: Merge branch 'master' of projects.qi-hardware.com:wernermisc (master) http://qi-hw.com/p/wernermisc/85f5b56 | 07:56 |
qi-bot | [commit] Werner Almesberger: fisl2012/: on-going editing (more links, move libraries slide, add FISL12 items) (master) http://qi-hw.com/p/wernermisc/dc61289 | 09:15 |
qi-bot | [commit] Werner Almesberger: fisl2012/Makefile: fix printing (master) http://qi-hw.com/p/wernermisc/b81ee8a | 11:32 |
qi-bot | [commit] Werner Almesberger: fisl2012/talk.tex: some more small changes (master) http://qi-hw.com/p/wernermisc/72b587f | 11:32 |
qi-bot | [commit] Werner Almesberger: ubb-usb/pin-change.fig: corrected some small errors in drawing or style (master) http://qi-hw.com/p/ben-blinkenlights/d897d8f | 15:04 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ubb-vga/regs4740.h: add some more register locations (master) http://qi-hw.com/p/ben-blinkenlights/9942f62 | 15:04 |
qi-bot | [commit] Werner Almesberger: avrdude/: make patches relative to avrdude-<version> directory (master) http://qi-hw.com/p/ben-blinkenlights/b0e83a9 | 15:04 |
qi-bot | [commit] Werner Almesberger: avrdude/patches/nanonote.patch: fix pin inversion in nanonote.c:nanonote_getpin (master) http://qi-hw.com/p/ben-blinkenlights/2f65672 | 15:04 |
qi-bot | [commit] Werner Almesberger: avrdude/: upgrade from avrdude-5.10 to avrdude-5.11.1 (master) http://qi-hw.com/p/ben-blinkenlights/f676813 | 15:04 |
qi-bot | [commit] Werner Almesberger: avrdude/: support use of CLK for regular I/O (master) http://qi-hw.com/p/ben-blinkenlights/6b838ee | 15:04 |
qi-bot | [commit] Werner Almesberger: avrdude/patches/nanonote.patch: clean up initialization of pin_map (master) http://qi-hw.com/p/ben-blinkenlights/266fe49 | 15:04 |
qi-bot | [commit] Werner Almesberger: avrdude/patches/local-config.patch: new option -L to add local config files (master) http://qi-hw.com/p/ben-blinkenlights/acac482 | 15:04 |
qi-bot | [commit] Werner Almesberger: avrduded/patches/: remove ATmega32u2 config entry (master) http://qi-hw.com/p/ben-blinkenlights/a628cfa | 16:17 |
qi-bot | [commit] Xiangfu: copy cx6slx9 from azonenberg lib (master) http://qi-hw.com/p/kicad-libs/880f009 | 03:41 |
---|---|---|
qi-bot | [commit] Xiangfu: add AUTHOR/pro info about xc6slx9-tqg144 (master) http://qi-hw.com/p/kicad-libs/dd67cef | 03:41 |
qi-bot | [commit] Werner Almesberger: dsv/dsv: change viewer default from xpdf to xdg-open; introduce DSV_VIEWER; add README (master) http://qi-hw.com/p/eda-tools/4a0b547 | 12:49 |
qi-bot | [commit] Werner Almesberger: gui_status.c (show_pad_type): share pad type to name translation (master) http://qi-hw.com/p/fped/57dbeb1 | 01:43 |
---|---|---|
qi-bot | [commit] Werner Almesberger: postscript.c: move drawing part of ps_pad_name and ps_pad to separate functions (master) http://qi-hw.com/p/fped/238830c | 01:43 |
qi-bot | [commit] Werner Almesberger: postscript.c (hatch): change argument from layer set to pad type (master) http://qi-hw.com/p/fped/26b74e8 | 01:43 |
qi-bot | [commit] Werner Almesberger: postscript.c: show key for pad types at bottom of fullpage drawings (-P -K) (master) http://qi-hw.com/p/fped/d250ed2 | 01:43 |
qi-bot | [commit] Werner Almesberger: postscript.c (prologue): set line join style to "round" in showoutlined (master) http://qi-hw.com/p/fped/c28f701 | 01:43 |
qi-bot | [commit] Werner Almesberger: postscript.c: cleaned up geometry calculation for pad type key (master) http://qi-hw.com/p/fped/ed69b7b | 01:43 |
qi-bot | [commit] Werner Almesberger: postscript.c: only show the key for pad types actually used in the package (master) http://qi-hw.com/p/fped/b4d61a8 | 01:43 |
qi-bot | [commit] Werner Almesberger: Merge branch 'master' of projects.qi-hardware.com:fped (master) http://qi-hw.com/p/fped/52c288e | 01:43 |
qi-bot | [commit] Werner Almesberger: genkicat/fped.c (fped_ps_entry): use fped -P -K (key) and adjust position (master) http://qi-hw.com/p/eda-tools/d67e8ec | 01:44 |
qi-bot | [commit] Werner Almesberger: modules/usb-a-pcb.fpd: change pad type from "normal" to "bare" (master) http://qi-hw.com/p/kicad-libs/faedf56 | 03:12 |
qi-bot | [commit] Werner Almesberger: modules/: make pads of all fully through-hole components "bare" (master) http://qi-hw.com/p/kicad-libs/00711fd | 03:12 |
qi-bot | [commit] Werner Almesberger: modules/pads.fpd: make also square and rectangular pads "bare" (master) http://qi-hw.com/p/kicad-libs/9be533b | 03:12 |
qi-bot | [commit] Werner Almesberger: modules/usb_a_plug_smt.fpd: mixed TH/SMT; change the two TH pads to "bare" (master) http://qi-hw.com/p/kicad-libs/c0e33e5 | 03:12 |
qi-bot | [commit] Werner Almesberger: modules/meander-2450MHz.fpd: make all pads "trace" (regression) (master) http://qi-hw.com/p/kicad-libs/cbfba83 | 03:12 |
qi-bot | [commit] Werner Almesberger: dsv/dsv: add support for PDF embedded in ZIP (master) http://qi-hw.com/p/eda-tools/e5e67dd | 14:31 |
qi-bot | [commit] Werner Almesberger: modules/: add measurementes to DIP-4/6-300mil; add to catalog and Makefile (master) http://qi-hw.com/p/kicad-libs/5ed1670 | 01:48 |
---|---|---|
qi-bot | [commit] Werner Almesberger: modules/dip.fpd: add pitch measurement (master) http://qi-hw.com/p/kicad-libs/caa6e50 | 01:48 |
qi-bot | [commit] Werner Almesberger: modules/header.fpd: rearrange measurements; add pitch measurement (master) http://qi-hw.com/p/kicad-libs/9f12747 | 01:48 |
qi-bot | [commit] Werner Almesberger: modules/: add ZX62M-B-BP (zx62m-b-5p.fpd) to catalog and Makefile (master) http://qi-hw.com/p/kicad-libs/2c9476c | 01:48 |
qi-bot | [commit] Werner Almesberger: genkicat/tree.c: add section comments; fix typo in diagnostic (master) http://qi-hw.com/p/eda-tools/4811fb3 | 01:48 |
qi-bot | [commit] Werner Almesberger: genkicat/: detect URLs in comments and add PDF hyperlink (master) http://qi-hw.com/p/eda-tools/993ea81 | 01:48 |
qi-bot | [commit] Werner Almesberger: modules/pads-array.fpd: added measurements; enabled more pads types (master) http://qi-hw.com/p/kicad-libs/71075ec | 02:49 |
---|---|---|
qi-bot | [commit] Werner Almesberger: modules/header.fpd: add measurement of overall length (master) http://qi-hw.com/p/kicad-libs/6216a97 | 02:49 |
qi-bot | [commit] Werner Almesberger: modules/sot.fpd: put width measurement at constant distance from pad (master) http://qi-hw.com/p/kicad-libs/6ff4042 | 02:49 |
qi-bot | [commit] Werner Almesberger: modules/dip.fpd: add measurements (master) http://qi-hw.com/p/kicad-libs/563e594 | 02:49 |
qi-bot | [commit] Xiangfu: debian: update debian version (master) http://qi-hw.com/p/fped/6e61ff9 | 02:02 |
---|---|---|
qi-bot | [commit] Xiangfu: naonote-files: add missing file: sysctl.conf (master) http://qi-hw.com/p/openwrt-packages/be0ae26 | 02:32 |
qi-bot | [commit] Xiangfu: m1/tools/m1nor: erase data partition before reflash (master) http://qi-hw.com/p/wernermisc/c84ba20 | 01:17 |
---|---|---|
qi-bot | [commit] Werner Almesberger: gencat/: remove awkward callback from set_libs to lookup_sym (master) http://qi-hw.com/p/eda-tools/b34b091 | 02:55 |
qi-bot | [commit] Werner Almesberger: gencat/: abstract library data structure and its management (WIP) (master) http://qi-hw.com/p/eda-tools/e62c717 | 02:55 |
qi-bot | [commit] Werner Almesberger: gencat/libs.[ch]: keep back pointer to file in "struct entry" (master) http://qi-hw.com/p/eda-tools/6e0015c | 02:55 |
qi-bot | [commit] Werner Almesberger: gencat/: keep "struct entry" ptr in "struct node" instead of duplicating content (master) http://qi-hw.com/p/eda-tools/1b6bf60 | 02:55 |
qi-bot | [commit] Werner Almesberger: gencat/: move script execution from pdf.c to run.c (master) http://qi-hw.com/p/eda-tools/2875940 | 02:55 |
qi-bot | [commit] Werner Almesberger: gencat/libs.[ch]: keep back pointer to lib in "struct file" (master) http://qi-hw.com/p/eda-tools/8ee13bd | 02:55 |
qi-bot | [commit] Werner Almesberger: gencat/: move script execution from pdf.c to library-specific function (master) http://qi-hw.com/p/eda-tools/acf0d0a | 02:55 |
qi-bot | [commit] Werner Almesberger: gencat/pdf.c: use internal pointer as destination key (master) http://qi-hw.com/p/eda-tools/605585f | 02:55 |
qi-bot | [commit] Werner Almesberger: gencat/pdf.c: key index entries by the tree node, to distinguish duplicates (master) http://qi-hw.com/p/eda-tools/463e8dc | 02:55 |
qi-bot | [commit] Werner Almesberger: gencat/: minor cleanup (one comment, add "static", remove unused header) (master) http://qi-hw.com/p/eda-tools/9c0a43e | 03:58 |
qi-bot | [commit] Werner Almesberger: gencat/: make library selection variable (master) http://qi-hw.com/p/eda-tools/9cf8adf | 03:58 |
qi-bot | [commit] Werner Almesberger: gencat/: new option -F to use fped footprints (WIP) (master) http://qi-hw.com/p/eda-tools/e448145 | 03:58 |
qi-bot | [commit] Werner Almesberger: gencat/pdf.c: make "format" a pointer, not a copy of the format settings (master) http://qi-hw.com/p/eda-tools/7cbd51e | 07:48 |
qi-bot | [commit] Werner Almesberger: gencat/: delegate landscape/portrait setup to library-specific ps_entry (master) http://qi-hw.com/p/eda-tools/c035def | 07:48 |
qi-bot | [commit] Werner Almesberger: gencat/fped.c (fped_ps_entry): remove OUT pdfmark from fped's Postscript (master) http://qi-hw.com/p/eda-tools/8562ad2 | 07:48 |
qi-bot | [commit] Werner Almesberger: gencat/libs.c (add_libdir): ignore files with a ~ in their name (master) http://qi-hw.com/p/eda-tools/dd45ce8 | 07:48 |
qi-bot | [commit] Werner Almesberger: modules/to.fpd (TO-252): remove zero-width pad 2 (master) http://qi-hw.com/p/kicad-libs/359ccc0 | 07:49 |
qi-bot | [commit] Werner Almesberger: modules/tssop5.fpd: remove zero-width pad 5 (master) http://qi-hw.com/p/kicad-libs/c21e1f0 | 07:49 |
qi-bot | [commit] Werner Almesberger: modules/: first elements for catalog creation (WIP) (master) http://qi-hw.com/p/kicad-libs/c8d825d | 07:49 |
qi-bot | [commit] Werner Almesberger: modules/meander-2450MHz.fpd: do not try to add a tail if zero-sized (master) http://qi-hw.com/p/kicad-libs/711147c | 19:36 |
qi-bot | [commit] Werner Almesberger: modules/HIERARCHY: enable MEANDER-2450MHz-{right,left}-1.0mm (master) http://qi-hw.com/p/kicad-libs/1d23f0a | 19:36 |
qi-bot | [commit] Werner Almesberger: modules/Makefile: generate list of .fpd files from variable MODULES (master) http://qi-hw.com/p/kicad-libs/475ba28 | 19:36 |
qi-bot | [commit] Werner Almesberger: inst.c: zero-sized pads and holes now cause instantiation to fail (master) http://qi-hw.com/p/fped/e2ce0ee | 21:20 |
qi-bot | [commit] Werner Almesberger: track bounding box also on a per-package basis and use this to scale Postscript (master) http://qi-hw.com/p/fped/86c082f | 21:20 |
qi-bot | [commit] Werner Almesberger: new use of option -s (scaling): -s [width]x[heigth] (master) http://qi-hw.com/p/fped/1c01bc3 | 21:20 |
qi-bot | [commit] Werner Almesberger: Merge branch 'master' of projects.qi-hardware.com:fped (master) http://qi-hw.com/p/fped/54434e9 | 21:20 |
qi-bot | [commit] Werner Almesberger: gencat/pdf.c (comp): make alphabetic index case-insensitive (master) http://qi-hw.com/p/eda-tools/340428c | 21:21 |
qi-bot | [commit] Werner Almesberger: gencat/pdf.c (convert_comp): rename to convert_comp (master) http://qi-hw.com/p/eda-tools/408c003 | 21:21 |
qi-bot | [commit] Werner Almesberger: gencat/pdf.c: reduce number of columns and make them wider (master) http://qi-hw.com/p/eda-tools/a98df2a | 21:21 |
qi-bot | [commit] Werner Almesberger: gencat/run.c (run_cmd): print actual command name, not "sym2xps" (master) http://qi-hw.com/p/eda-tools/9d278a0 | 21:21 |
qi-bot | [commit] Werner Almesberger: gencat/fped.c (fped_ps_entry): scale footprint to a height of 200 mm and center (master) http://qi-hw.com/p/eda-tools/ae3b812 | 21:21 |
qi-bot | [commit] Werner Almesberger: gencat/tree.c (read_desc): ignore lines with a # as the very first character (master) http://qi-hw.com/p/eda-tools/274a84f | 21:57 |
qi-bot | [commit] Werner Almesberger: modules/{Makefile, DESCR}: include descriptions in catalog (master) http://qi-hw.com/p/kicad-libs/62fa46c | 21:57 |
qi-bot | [commit] Werner Almesberger: scripts/missing-in-tree: change genex to gencat also here (master) http://qi-hw.com/p/kicad-libs/74fe288 | 22:20 |
qi-bot | [commit] Werner Almesberger: scripts/missing-in-tree: support also fped footprints (option -F) (master) http://qi-hw.com/p/kicad-libs/837bc99 | 22:20 |
qi-bot | [commit] Werner Almesberger: modules/Makefile (missing): new target to list footprints missing in hierarchy (master) http://qi-hw.com/p/kicad-libs/5496ac5 | 22:20 |
qi-bot | [commit] Werner Almesberger: modules/Makefile: move "clean" and "spotless" at their usual place at the end (master) http://qi-hw.com/p/kicad-libs/20f476b | 22:20 |
qi-bot | [commit] Werner Almesberger: gencat/gencat.c (usage): reformat usage message to avoid overly long lines (master) http://qi-hw.com/p/eda-tools/6fae97a | 22:31 |
qi-bot | [commit] Werner Almesberger: gencat clashes with an existing tool. rename to genkicat (1/2) (master) http://qi-hw.com/p/eda-tools/48434c8 | 23:15 |
qi-bot | [commit] Werner Almesberger: rename gencat to genkicat (2/2) (master) http://qi-hw.com/p/eda-tools/2c0ee94 | 23:15 |
qi-bot | [commit] Werner Almesberger: genkicat/: clarify some header comments (master) http://qi-hw.com/p/eda-tools/a6039ab | 23:15 |
qi-bot | [commit] Werner Almesberger: track "gencat" to "genkicat" name change (master) http://qi-hw.com/p/kicad-libs/8114d1d | 23:15 |
qi-bot | [commit] Xiangfu: update nanonote compile-openwrt-xburst.sh (master) http://qi-hw.com/p/openwrt-packages/6f13dd1 | 02:52 |
---|---|---|
qi-bot | [commit] Xiangfu: MPlayer: disable pulse (master) http://qi-hw.com/p/openwrt-packages/b61e78d | 02:52 |
qi-bot | [commit] Xiangfu: xburst: ben nanonote: add modifire keys and fbcon-color patches (master) http://qi-hw.com/p/openwrt-xburst/6ce0667 | 03:32 |
qi-bot | [commit] Werner Almesberger: gencat/pdf.c: add generation of alphabetic index with hyperlinks (master) http://qi-hw.com/p/eda-tools/e1d613a | 15:32 |
qi-bot | [commit] Werner Almesberger: gencat/pdf.c: add section titles (master) http://qi-hw.com/p/eda-tools/b3113fc | 15:32 |
qi-bot | [commit] Werner Almesberger: components/Makefile: change name of "genex" to "gencat" (master) http://qi-hw.com/p/kicad-libs/41befc9 | 15:33 |
qi-bot | [commit] Werner Almesberger: genex/genex.h: oops, forgot to check this file in (master) http://qi-hw.com/p/eda-tools/2800fa9 | 15:26 |
---|---|---|
qi-bot | [commit] Werner Almesberger: genex/: renamed genex to gencat (master) http://qi-hw.com/p/eda-tools/e832845 | 15:26 |
qi-bot | [commit] Werner Almesberger: gencat/comp.*: renamed to tree.* (master) http://qi-hw.com/p/eda-tools/823b85f | 15:26 |
qi-bot | [commit] Werner Almesberger: gencat/libs.*: renamed to comp.* (master) http://qi-hw.com/p/eda-tools/748a01f | 15:26 |
qi-bot | [commit] Werner Almesberger: fab/m1/: update path name and drill file offset for M1r4 (master) http://qi-hw.com/p/eda-tools/f6720c7 | 15:26 |
qi-bot | [commit] Xiangfu: m1/patches/rtems: sync with latest rtems, 2 more patches applied (master) http://qi-hw.com/p/wernermisc/7c522b2 | 07:45 |
---|---|---|
qi-bot | [commit] Xiangfu: m1/patches/rtems: add the bug url to comment (master) http://qi-hw.com/p/wernermisc/cade694 | 07:58 |
qi-bot | [commit] Xiangfu: m1/patches/rtems: mic-boost patch applied in upstream (master) http://qi-hw.com/p/wernermisc/c9efa64 | 12:20 |
qi-bot | [commit] Xiangfu: milkymist-files: files for configure m1 wireless gadget (master) http://qi-hw.com/p/openwrt-packages/a9bac6c | 02:18 |
---|---|---|
qi-bot | [commit] Xiangfu: milkymist files: update m1-wireless script files (master) http://qi-hw.com/p/openwrt-packages/b9e5598 | 09:11 |
qi-bot | [commit] Xiangfu: cleanup milkymist openwrt files (master) http://qi-hw.com/p/openwrt-packages/a80bbfe | 10:42 |
qi-bot | [commit] Xiangfu: add milkymist wireless gadget files (master) http://qi-hw.com/p/openwrt-packages/ac6156f | 10:42 |
qi-bot | [commit] Xiangfu: milkymist-TLWR703: using ifup instead of wifi command (master) http://qi-hw.com/p/openwrt-packages/5c7b984 | 12:21 |
qi-bot | [commit] Xiangfu: milkymist-TLWR703: fix typo (master) http://qi-hw.com/p/openwrt-packages/6df26d4 | 13:29 |
qi-bot | [commit] Xiangfu: milkymist-TLWR703, after ifup, it take sometime finish configure network (master) http://qi-hw.com/p/openwrt-packages/d309104 | 13:29 |
qi-bot | [commit] Xiangfu: naonote-files: config.minimal: disable other 802154 kmods (master) http://qi-hw.com/p/openwrt-packages/b7f3bc4 | 13:52 |
qi-bot | [commit] Xiangfu: milkymist-TLWR703, after ifup, it take more then one more second for finish configure network (master) http://qi-hw.com/p/openwrt-packages/d42a971 | 13:59 |
qi-bot | [commit] Xiangfu: config.full_system: remove other ieee802154 kmods (master) http://qi-hw.com/p/openwrt-packages/3f05141 | 07:33 |
---|
qi-bot | [commit] Xiangfu: fix helper-templates-in-copyright (master) http://qi-hw.com/p/xburst-tools/f2cb67a | 06:15 |
---|
qi-bot | [commit] Adam Wang: qfp.fpd: added more info about QFP48 (master) http://qi-hw.com/p/kicad-libs/6c2cafe | 07:50 |
---|
qi-bot | [commit] Paul Cercueil: Don't scan the NAND as it's already done elsewhere. (master) http://qi-hw.com/p/gmenu2x/64db1d7 | 21:15 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Check if USB cable is plugged before returning the battery level. (master) http://qi-hw.com/p/gmenu2x/7484ad2 | 21:15 |
qi-bot | [commit] Paul Cercueil: Open battery/USB file handlers only when needed. (master) http://qi-hw.com/p/gmenu2x/0d9977e | 21:15 |
qi-bot | [commit] Paul Cercueil: Don't re-execute gmenu2x on error, just call main() again. (master) http://qi-hw.com/p/gmenu2x/a21650d | 21:15 |
qi-bot | [commit] Paul Cercueil: Use function getSkinPath() instead of reading the dir of the binary (master) http://qi-hw.com/p/gmenu2x/cf20f36 | 21:15 |
qi-bot | [commit] Paul Cercueil: Removed variable/function to get the directory of the executable. (master) http://qi-hw.com/p/gmenu2x/1241523 | 21:15 |
qi-bot | [commit] Paul Cercueil: Remove unused (proprietary-licensed for some) XCF fonts. (master) http://qi-hw.com/p/gmenu2x/16d66d0 | 22:59 |
qi-bot | [commit] Xiangfu: WPAN kernel module: make atusb depends on at86rf230 (master) http://qi-hw.com/p/openwrt-xburst/6524a48 | 05:50 |
---|---|---|
qi-bot | [commit] Xiangfu: WPAN: fix atusb cannot build as module (master) http://qi-hw.com/p/openwrt-xburst/ad41226 | 05:50 |
qi-bot | [commit] Xiangfu: WPAN: wpan.mk: fix typo, add other IEE802154 device to WPAN subment (master) http://qi-hw.com/p/openwrt-xburst/8e63117 | 05:50 |
qi-bot | [commit] Xiangfu: debina/changelog: update to latest commit (master) http://qi-hw.com/p/fped/f70c333 | 07:06 |
qi-bot | [commit] Xiangfu: debian/* update changelog and copyright for fix lintian errors (master) http://qi-hw.com/p/fped/c23d812 | 07:06 |
qi-bot | [commit] Xiangfu: Add .gitignore file (master) http://qi-hw.com/p/fped/0562403 | 10:03 |
---|---|---|
qi-bot | [commit] Xiangfu: Switch debian/* from SVN to GIT, now build package base on git commit (master) http://qi-hw.com/p/fped/45805bd | 10:03 |
qi-bot | [commit] Xiangfu: update debian/copyright url (master) http://qi-hw.com/p/fped/728a39f | 10:28 |
qi-bot | [commit] Xiangfu: Update ChangeLog (master) http://qi-hw.com/p/xburst-tools/db247de | 10:36 |
qi-bot | [commit] Xiangfu: debian/control: update email address (master) http://qi-hw.com/p/fped/7f1d484 | 12:08 |
qi-bot | [commit] Xiangfu: update email address (master) http://qi-hw.com/p/fped/e6fa108 | 12:08 |
qi-bot | [commit] Xiangfu: milkymist: files: automatic mount exroot at /dev/sda1 (master) http://qi-hw.com/p/openwrt-packages/2fbc9e8 | 03:32 |
---|---|---|
qi-bot | [commit] Xiangfu: urjtag: minor fix, create usr/lib folder (master) http://qi-hw.com/p/openwrt-packages/935266e | 03:40 |
qi-bot | [commit] Adam Wang: sot.fpd: added package of SO-235 also for TI DBV(R-PDSO-G5) (master) http://qi-hw.com/p/kicad-libs/445734e | 02:45 |
---|---|---|
qi-bot | [commit] Adam Wang: generic header through hole type (master) http://qi-hw.com/p/kicad-libs/f5392ae | 03:23 |
qi-bot | [commit] Adam Wang: added header.fpd: copied from Werner Almesberger (master) http://qi-hw.com/p/kicad-libs/045e848 | 03:24 |
qi-bot | [commit] Adam Wang: pads.fpd: added variant sets of C(circle), R(oround) and S(square) pads. (master) http://qi-hw.com/p/kicad-libs/3b35416 | 06:28 |
qi-bot | [commit] Adam Wang: dcjack.fpd: fixed "hole (line 63) not completely inside pad "3" (line 67)" (master) http://qi-hw.com/p/kicad-libs/667f6c9 | 02:20 |
---|---|---|
qi-bot | [commit] Xiangfu: config.full_system include kmod-ipv6 (master) http://qi-hw.com/p/openwrt-packages/009fea8 | 03:01 |
qi-bot | [commit] Xiangfu: urjtag: disable python bindings (master) http://qi-hw.com/p/openwrt-packages/ee4c2af | 04:33 |
qi-bot | [commit] Adam Wang: Makefile: added necessary fpd filename to generate mod file (master) http://qi-hw.com/p/kicad-libs/dd2c1a9 | 08:48 |
qi-bot | [commit] Adam Wang: ledsmd.fpd: fixed polarized marker (master) http://qi-hw.com/p/kicad-libs/7be9efc | 10:01 |
qi-bot | [commit] Xiangfu: urjtag: compile fine with disable inb outb (master) http://qi-hw.com/p/openwrt-packages/67ac56b | 12:26 |
qi-bot | [commit] Xiangfu: urjtag : replace inb/outb with some simple define (master) http://qi-hw.com/p/openwrt-packages/927287f | 13:57 |
qi-bot | [commit] Xiangfu: urjtag: fix the liburjtag.so.* path (master) http://qi-hw.com/p/openwrt-packages/f2a7a0d | 15:50 |
qi-bot | [commit] Xiangfu: xburst-tools, urjtag : add MAINTAINER (master) http://qi-hw.com/p/openwrt-packages/5fcb64c | 15:54 |
qi-bot | [commit] Xiangfu: nanonote-files: wpan.nn: add option for start dirtpan (master) http://qi-hw.com/p/openwrt-packages/595140e | 02:21 |
---|---|---|
qi-bot | [commit] Xiangfu: nanonotefiles: make inittab work with minimal config system (master) http://qi-hw.com/p/openwrt-packages/1ec3c83 | 08:44 |
qi-bot | [commit] Xiangfu: xburst: qi_lb60 select the nanonote slash screen (master) http://qi-hw.com/p/openwrt-xburst/5d69bcb | 08:52 |
qi-bot | [commit] Xiangfu: remove xburst target borken (master) http://qi-hw.com/p/openwrt-xburst/3a25183 | 08:52 |
qi-bot | [commit] Xiangfu: urjtag: fix typo (master) http://qi-hw.com/p/openwrt-packages/f5eefbc | 09:17 |
qi-bot | [commit] Paul Cercueil: ASoC: JZ4740: delay activation of the DAC to work around a sound bug. (jz-3.4) http://qi-hw.com/p/qi-kernel/ef84c71 | 17:34 |
qi-bot | [commit] Paul Cercueil: ASoC: JZ4740: Use msleep() to wait before enabling the DAC. (jz-3.4) http://qi-hw.com/p/qi-kernel/5d267d6 | 18:01 |
qi-bot | [commit] Paul Cercueil: MIPS: JZ4740: Delay using msleep to prevent spinning for 0.5s. (jz-3.4) http://qi-hw.com/p/qi-kernel/b5cb662 | 18:25 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: Work around fbcon logo crash with SLCD. (jz-3.4) http://qi-hw.com/p/qi-kernel/d072b59 | 19:22 |
qi-bot | [commit] Adam Wang: he-2row-dip.fpd: based on Werner Almesberger's he10.fpd (master) http://qi-hw.com/p/kicad-libs/e33374c | 02:20 |
---|---|---|
qi-bot | [commit] Adam Wang: mic-ra-dip.fpd: added package of MIC-RA-DIP-${Dia}x${Height} (master) http://qi-hw.com/p/kicad-libs/3a6c441 | 03:14 |
qi-bot | [commit] Adam Wang: tactile-sw-spst-ra-dip.fpd: added package of TACTIL-SW-${TYPE}-RA-${A}-${B} (master) http://qi-hw.com/p/kicad-libs/c456f08 | 08:47 |
qi-bot | [commit] Adam Wang: spacer.fpd: added packages of SPACER-$nominal-$disc-$keepout$type (master) http://qi-hw.com/p/kicad-libs/0f80888 | 10:10 |
qi-bot | [commit] Xiangfu: nanonote: compile-openwrt-xburst.sh: only send message when success build (master) http://qi-hw.com/p/openwrt-packages/4ae1eb1 | 14:38 |
qi-bot | [commit] Xiangfu: new package: urjtag: initial port (master) http://qi-hw.com/p/openwrt-packages/2cc7f1b | 14:38 |
qi-bot | [commit] Xiangfu: new package: bitcoin: initial port, not finish yet (master) http://qi-hw.com/p/openwrt-packages/7858183 | 14:38 |
qi-bot | [commit] Adam Wang: dvi-recept-ra.fpd: added DVI-RECEPT-RA (master) http://qi-hw.com/p/kicad-libs/c870461 | 05:46 |
---|---|---|
qi-bot | [commit] Adam Wang: rca-3-ra.fpd: added RCA-3-RA (master) http://qi-hw.com/p/kicad-libs/43a6631 | 08:55 |
qi-bot | [commit] Adam Wang: rca-3-ra.fpd: renamed package name to RCA-3-RA (master) http://qi-hw.com/p/kicad-libs/abb5e71 | 09:01 |
qi-bot | [commit] Adam Wang: 8_10-socket-ra.fpd: added 8:10-SOCKET-RA (master) http://qi-hw.com/p/kicad-libs/eeae68b | 12:42 |
qi-bot | [commit] Paul Cercueil: Don't log the console-based apps. (master) http://qi-hw.com/p/gmenu2x/1080527 | 15:36 |
qi-bot | [commit] Paul Cercueil: Removed unused function GMenu2X:setGamma() (master) http://qi-hw.com/p/gmenu2x/bc2b5d5 | 22:10 |
qi-bot | [commit] Paul Cercueil: Removed unused (and broken) TV-out feature. (master) http://qi-hw.com/p/gmenu2x/374371c | 22:10 |
qi-bot | [commit] Paul Cercueil: Drop GP2X platform support. (master) http://qi-hw.com/p/gmenu2x/9263c78 | 22:10 |
qi-bot | [commit] Paul Cercueil: Removed old commented code. (master) http://qi-hw.com/p/gmenu2x/dd04701 | 22:10 |
qi-bot | [commit] Paul Cercueil: Removed last bits of the "volume" feature. (master) http://qi-hw.com/p/gmenu2x/21fee6c | 22:10 |
qi-bot | [commit] Paul Cercueil: Removed last bits of the "backlight" feature. (master) http://qi-hw.com/p/gmenu2x/d662158 | 22:10 |
qi-bot | [commit] Adam Wang: xlr-socket.fpd: added XLR-PANEL-HORIZ/PCB-SOCKET (master) http://qi-hw.com/p/kicad-libs/ec427d9 | 02:21 |
---|---|---|
qi-bot | [commit] Adam Wang: xlr-socket.fpd: fixed pad 3's solder pad ring size. (master) http://qi-hw.com/p/kicad-libs/6276cf2 | 02:53 |
qi-bot | [commit] Adam Wang: xlr-plug.fpd: added XLR-PANEL-HORIZ/PCB-PLUG (master) http://qi-hw.com/p/kicad-libs/c14108c | 03:21 |
qi-bot | [commit] Adam Wang: din-5.fpd: added DIN-SOCKET-PCB-5-45 (master) http://qi-hw.com/p/kicad-libs/22a5af8 | 06:19 |
qi-bot | [commit] Adam Wang: dcjack.fpd: added DCJACK-${L}x${W} (master) http://qi-hw.com/p/kicad-libs/9f07d10 | 07:52 |
qi-bot | [commit] Adam Wang: usb-a-dual-recept-r.fpd: added USB-A-DUAL-RECEPT-RA (master) http://qi-hw.com/p/kicad-libs/2594403 | 13:20 |
qi-bot | [commit] Adam Wang: he-shrouded.fpd: SMD type header with shrouded case outline (master) http://qi-hw.com/p/kicad-libs/081a8b8 | 08:35 |
---|---|---|
qi-bot | [commit] Werner Almesberger: modules/meander-2.4GHz.fpd: 2.4 GHz PCB antenna (master) http://qi-hw.com/p/kicad-libs/c2feac5 | 08:47 |
qi-bot | [commit] Werner Almesberger: modules/meander-2.4GHz.fpd: KiCad hates dots - renamed to meander-2450MHz.fpd (master) http://qi-hw.com/p/kicad-libs/65c0281 | 09:27 |
qi-bot | [commit] Adam Wang: he-shrouded.fpd: added NPTH frame (master) http://qi-hw.com/p/kicad-libs/8ea31aa | 11:12 |
qi-bot | [commit] Adam Wang: Merge branch 'master' of projects.qi-hardware.com:kicad-libs (master) http://qi-hw.com/p/kicad-libs/6f14961 | 11:12 |
qi-bot | [commit] Werner Almesberger: poly2d/: automatically switch between clockwise and counter-clockwise polygons (master) http://qi-hw.com/p/cae-tools/46c8f86 | 18:24 |
qi-bot | [commit] Werner Almesberger: poly2d/: simplify semantics of first/next offset in area fill (master) http://qi-hw.com/p/cae-tools/a950c5b | 18:24 |
qi-bot | [commit] Werner Almesberger: poly2h/: auto-generate dependencies also for C++ code (master) http://qi-hw.com/p/cae-tools/7f813b5 | 18:24 |
qi-bot | [commit] Werner Almesberger: poly2d/p2d_hsort.c (p2d_hier_free): use p2d_free, not p2d_free_all (master) http://qi-hw.com/p/cae-tools/038667d | 18:24 |
qi-bot | [commit] Werner Almesberger: cameo/: use libpoly2d for area fills (master) http://qi-hw.com/p/cae-tools/1c11f4d | 18:24 |
qi-bot | [commit] Werner Almesberger: poly2d/: add foreach_v2d* and foreach_edges looping constructs (master) http://qi-hw.com/p/cae-tools/3ee5b1a | 18:24 |
qi-bot | [commit] Werner Almesberger: cameo/: new commands "remove" and "keep" for path filtering (untested) (master) http://qi-hw.com/p/cae-tools/e69fa24 | 18:24 |
qi-bot | [commit] Werner Almesberger: cameo/path.c: move assert(path_is_closed) into function and improve diagnostic (master) http://qi-hw.com/p/cae-tools/382d14d | 18:24 |
qi-bot | [commit] Werner Almesberger: cameo/path.c: make path_is_closed global (master) http://qi-hw.com/p/cae-tools/f48754e | 18:24 |
qi-bot | [commit] Werner Almesberger: cameo/: move conversion between poly2d and "struct path" from area-poly2d.c to poly2d.c (master) http://qi-hw.com/p/cae-tools/7b54293 | 18:24 |
qi-bot | [commit] Werner Almesberger: cameo/path.c: new function path_is_inside which calls p2d_contains_poly (master) http://qi-hw.com/p/cae-tools/378aab0 | 18:24 |
qi-bot | [commit] Werner Almesberger: cameo/: experimental command "outside" to detect real outer borders (master) http://qi-hw.com/p/cae-tools/072b780 | 18:24 |
qi-bot | [commit] Adam Wang: scj368r1.fpd: added 3.5mm audio stereo phone jack (master) http://qi-hw.com/p/kicad-libs/12ffd30 | 02:29 |
---|---|---|
qi-bot | [commit] Adam Wang: Merge branch 'master' of projects.qi-hardware.com:kicad-libs (master) http://qi-hw.com/p/kicad-libs/354d60f | 02:29 |
qi-bot | [commit] Adam Wang: renamed scj368r1.fpd -> phonejack.fpd: phonejack-${size}-${N} (master) http://qi-hw.com/p/kicad-libs/dc51a1b | 04:01 |
qi-bot | [commit] Werner Almesberger: components/Makefile: "make" now generates instead of running "make sch" (master) http://qi-hw.com/p/kicad-libs/49fa1ab | 10:13 |
qi-bot | [commit] Werner Almesberger: componens/adxl32x.lib: add pin for pad; put into components.pro (master) http://qi-hw.com/p/kicad-libs/6ecb851 | 10:20 |
qi-bot | [commit] Werner Almesberger: b2/test/subesc: more tests; also for values; add explanation of escaping (master) http://qi-hw.com/p/eda-tools/7f24ef0 | 11:55 |
qi-bot | [commit] Werner Almesberger: genex/expand-pintype: add translation for "new" pin type NC (master) http://qi-hw.com/p/eda-tools/3949ead | 11:55 |
qi-bot | [commit] Werner Almesberger: genex/expand-pintype: reduce character width (master) http://qi-hw.com/p/eda-tools/4cb56eb | 11:55 |
qi-bot | [commit] Adam Wang: rj45.fpd: RJ45-8-LED added 8 pins ethernet connectors with two leds version from Molex. (master) http://qi-hw.com/p/kicad-libs/178fbc3 | 12:22 |
qi-bot | [commit] Adam Wang: Merge branch 'master' of projects.qi-hardware.com:kicad-libs (master) http://qi-hw.com/p/kicad-libs/b9a3927 | 12:22 |
qi-bot | [commit] Werner Almesberger: components/: generate for connectors CONN_1 to CONN_40X2 (in gencon.lib) (master) http://qi-hw.com/p/kicad-libs/7864070 | 01:30 |
---|---|---|
qi-bot | [commit] Werner Almesberger: modules/pads-array.fpd: we need loop for pins and for packages, not just one (master) http://qi-hw.com/p/kicad-libs/20c9436 | 14:59 |
qi-bot | [commit] Werner Almesberger: components/adxl32x.lib: Analog Devices ADXL321, ... accelerometers (master) http://qi-hw.com/p/kicad-libs/96c7eb3 | 14:59 |
qi-bot | [commit] Werner Almesberger: modules/qfn.fpd: add experimental footprint for AD CP-16-5a* MQ_LFCSP_LQ (master) http://qi-hw.com/p/kicad-libs/e01b8d6 | 14:59 |
qi-bot | [commit] Werner Almesberger: modules/Makefile (MODULES): add bat-clip-aa-th (master) http://qi-hw.com/p/kicad-libs/8d40b38 | 23:10 |
---|---|---|
qi-bot | [commit] Werner Almesberger: modules/pads-array.fpd: like pads.fpd, but in a array formations (WIP) (master) http://qi-hw.com/p/kicad-libs/86ce0c0 | 23:10 |
qi-bot | [commit] Adam Wang: c-t-smd.fpd: added variants named: TC-$Case-$EIA-$Density for relevant EIA size of Tantalum capacitors (master) http://qi-hw.com/p/kicad-libs/9a717ee | 05:31 |
---|---|---|
qi-bot | [commit] Adam Wang: stdpass.fpd: added 1812 size which referred from TycoElectronics (master) http://qi-hw.com/p/kicad-libs/17ae71b | 07:51 |
qi-bot | [commit] nbd: iproute2: fix build errors with newer versions of eglibc (master) http://qi-hw.com/p/openwrt-xburst/27057b9 | 09:23 |
qi-bot | [commit] nbd: eglibc: use 2.15 by default (master) http://qi-hw.com/p/openwrt-xburst/67b7bdf | 09:23 |
qi-bot | [commit] jow: [package] base-files: implement network_defer_device() and network_ready_device() wrappers for upcoming netifd iface deferring support (master) http://qi-hw.com/p/openwrt-xburst/ab865f7 | 09:23 |
qi-bot | [commit] blogic: [tools] fixes python related autokrampf install bug (master) http://qi-hw.com/p/openwrt-xburst/5aab29d | 09:23 |
qi-bot | [commit] nbd: e2fsprogs: add posix_memalign related portability patch from #8508 (master) http://qi-hw.com/p/openwrt-xburst/9c88d96 | 09:23 |
qi-bot | [commit] nbd: include/netfilter.mk: clean up, remove junk for old kernel versions (master) http://qi-hw.com/p/openwrt-xburst/7bd3c3f | 09:23 |
qi-bot | [commit] nbd: xburst: remove an obsolete CompareKernelPatchVer call (master) http://qi-hw.com/p/openwrt-xburst/cc530eb | 09:23 |
qi-bot | [commit] nbd: prereq-build: flex is built in tools/ - do not require it to be installed on the host (master) http://qi-hw.com/p/openwrt-xburst/a165494 | 09:23 |
qi-bot | [commit] nbd: kernel: add module packages for usbip (from the packages feed) (master) http://qi-hw.com/p/openwrt-xburst/a1b2ddf | 09:23 |
qi-bot | [commit] Mirko Vogt: add <http://downloads.qi-hardware.com/software/mirror-openwrt-sources/> (master) http://qi-hw.com/p/openwrt-xburst/8001e29 | 09:23 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: update to 2010.06 (master) http://qi-hw.com/p/openwrt-xburst/d1d8084 | 09:23 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: enable-silent-console.patch (master) http://qi-hw.com/p/openwrt-xburst/ccd9387 | 09:23 |
qi-bot | [commit] Xiangfu Liu: uboot silent console (master) http://qi-hw.com/p/openwrt-xburst/7200ed7 | 09:23 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: change load kernel size (master) http://qi-hw.com/p/openwrt-xburst/2705c20 | 09:23 |
qi-bot | [commit] Xiangfu: xburst: add WPAN support (master) http://qi-hw.com/p/openwrt-xburst/cfa3816 | 09:23 |
qi-bot | [commit] Xiangfu Liu: add WPAN(atben,atusb) kernel module file thansk blogic #qi-hardware @freenode.net (master) http://qi-hw.com/p/openwrt-xburst/521615a | 09:23 |
qi-bot | [commit] Xiangfu: xburst qi_lb60 disable WPAN kernel options, should build as module (master) http://qi-hw.com/p/openwrt-xburst/fb07ad2 | 09:23 |
qi-bot | [commit] Xiangfu: xburst: add Ben NanoNote kernel logo (master) http://qi-hw.com/p/openwrt-xburst/4e3f88b | 09:23 |
qi-bot | [commit] Xiangfu: xburst: qi_lb60 select the nanonote slash screen (master) http://qi-hw.com/p/openwrt-xburst/cd994e8 | 09:23 |
qi-bot | [commit] Xiangfu: remove xburst target borken (master) http://qi-hw.com/p/openwrt-xburst/d5ee224 | 09:23 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: update to 2010.06 (master) http://qi-hw.com/p/openwrt-xburst/af1689d | 10:44 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: enable-silent-console.patch (master) http://qi-hw.com/p/openwrt-xburst/fea83e4 | 10:44 |
qi-bot | [commit] Xiangfu Liu: uboot silent console (master) http://qi-hw.com/p/openwrt-xburst/a02cee8 | 10:44 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: change load kernel size (master) http://qi-hw.com/p/openwrt-xburst/a6bc3df | 10:44 |
qi-bot | [commit] Xiangfu: xburst: add WPAN support (master) http://qi-hw.com/p/openwrt-xburst/b622821 | 10:44 |
qi-bot | [commit] Xiangfu Liu: add WPAN(atben,atusb) kernel module file thansk blogic #qi-hardware @freenode.net (master) http://qi-hw.com/p/openwrt-xburst/2dface3 | 10:44 |
qi-bot | [commit] Xiangfu: xburst qi_lb60 disable WPAN kernel options, should build as module (master) http://qi-hw.com/p/openwrt-xburst/3f28756 | 10:44 |
qi-bot | [commit] Xiangfu: xburst: add Ben NanoNote kernel logo (master) http://qi-hw.com/p/openwrt-xburst/d87ac1f | 10:44 |
qi-bot | [commit] Xiangfu: xburst: qi_lb60 select the nanonote slash screen (master) http://qi-hw.com/p/openwrt-xburst/e3e188c | 10:44 |
qi-bot | [commit] Xiangfu: remove xburst target borken (master) http://qi-hw.com/p/openwrt-xburst/fd4e7e4 | 10:44 |
qi-bot | [commit] Adam Wang: stdpass.fpd: added a cathode for polarized variants(xxxxP) started from 0603 (master) http://qi-hw.com/p/kicad-libs/c05a603 | 01:11 |
---|---|---|
qi-bot | [commit] Adam Wang: Merge branch 'master' of projects.qi-hardware.com:kicad-libs (master) http://qi-hw.com/p/kicad-libs/57ab747 | 01:11 |
qi-bot | [commit] Adam Wang: xtal-4.fpd: (master) http://qi-hw.com/p/kicad-libs/3baf66a | 02:35 |
qi-bot | [commit] Adam Wang: xtal-2.fpd: added 2-pins smd xtal pattern -> xtal2-11.5mmx4.83mm (master) http://qi-hw.com/p/kicad-libs/eb8132c | 05:44 |
qi-bot | [commit] Adam Wang: xtal-4.fpd: added xtal4-5mmx3.2mm variant package (master) http://qi-hw.com/p/kicad-libs/bcdcbdb | 06:38 |
qi-bot | [commit] Adam Wang: c-smd.fpd: added packages for SMD Aluminum Electrolytic Capacitors (master) http://qi-hw.com/p/kicad-libs/71a66c7 | 12:28 |
qi-bot | [commit] Jiva Nath Bagale: fixed gmp shared library issue for guile2 (master) http://qi-hw.com/p/openwrt-packages/35f6adf | 14:07 |
qi-bot | [commit] Jiva Nath Bagale: Merge branch 'master' of git://projects.qi-hardware.com/openwrt-packages (master) http://qi-hw.com/p/openwrt-packages/e2e4bcd | 14:07 |
qi-bot | [commit] Adam Wang: tssop5.fpd: TSSOP5 for NXP (master) http://qi-hw.com/p/kicad-libs/3c76baf | 02:33 |
---|---|---|
qi-bot | [commit] Adam Wang: sot23.fpd: added measurement for max. distance between pads. (master) http://qi-hw.com/p/kicad-libs/b068f97 | 03:06 |
qi-bot | [commit] Xiangfu: ben-wpan: now ben-wpan tools also build for other targets (master) http://qi-hw.com/p/openwrt-packages/23f18f7 | 03:23 |
qi-bot | [commit] Adam Wang: INFO: added more SOT23 info (master) http://qi-hw.com/p/kicad-libs/61750b4 | 03:25 |
qi-bot | [commit] Adam Wang: INFO: added DO-214 package info. (master) http://qi-hw.com/p/kicad-libs/20f23f8 | 06:31 |
qi-bot | [commit] Adam Wang: do-214.fpd: added DO-214AA package (master) http://qi-hw.com/p/kicad-libs/0f19a6d | 07:57 |
qi-bot | [commit] Adam Wang: ledsmd.fpd: added LEDSMD-0603R for right angle LED land pattern. Not include light shadow area. (master) http://qi-hw.com/p/kicad-libs/1357fee | 09:01 |
qi-bot | [commit] Werner Almesberger: modules/bat-clip-aa-th.fpd: open clip for AA batteries, through-hole (master) http://qi-hw.com/p/kicad-libs/0eb3881 | 22:09 |
qi-bot | [commit] Xiangfu: fix typo (master) http://qi-hw.com/p/xburst-tools/3717f0c | 02:30 |
---|---|---|
qi-bot | [commit] Xiangfu: add create tar.bz2 ball rule (master) http://qi-hw.com/p/xburst-tools/f07971b | 02:30 |
qi-bot | [commit] Xiangfu: add BIG_ENDIAN support to usbboot (master) http://qi-hw.com/p/xburst-tools/ff28d4c | 02:30 |
qi-bot | [commit] Xiangfu: xburst-tools: update to latest, support MIPSEB now (master) http://qi-hw.com/p/openwrt-packages/341c9cf | 02:32 |
qi-bot | [commit] Adam Wang: bga.fpd: added module for Altera 484-FineLine BGA(FBGA) and Xilinx FG(G)484 Fine-Pitch BGA, 1.00 mm pitch (master) http://qi-hw.com/p/kicad-libs/2f182e5 | 06:31 |
qi-bot | [commit] Adam Wang: sot23.fpd: added SOT23 generic package with counter-clockweise or clockwise pin assignment (master) http://qi-hw.com/p/kicad-libs/acebf7d | 08:27 |
qi-bot | [commit] Paul Cercueil: MIPS: JZ4740: Wait for delayed work to finish before disabling SLCD. (jz-3.4) http://qi-hw.com/p/qi-kernel/81861fa | 11:03 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: SLCD: Don't enable the device clock twice on resume. (jz-3.4) http://qi-hw.com/p/qi-kernel/cdc51ce | 11:13 |
qi-bot | [commit] Adam Wang: tsop.fpd: changed measurements and moved marker to be close to pin1's left side. (master) http://qi-hw.com/p/kicad-libs/35b9111 | 14:20 |
qi-bot | [commit] Adam Wang: added TSSOP info (master) http://qi-hw.com/p/kicad-libs/3fdc95e | 14:25 |
qi-bot | [commit] Paul Cercueil: MIPS: JZ4740: SLCD: wait for VSYNC before panning display. (jz-3.4) http://qi-hw.com/p/qi-kernel/a510b72 | 18:38 |
qi-bot | [commit] Werner Almesberger: b2/: handle attempts to break/continue (in substitutions) without a block (master) http://qi-hw.com/p/eda-tools/ddbf80b | 00:26 |
---|---|---|
qi-bot | [commit] Werner Almesberger: b2/test/subbreak: test "break" in substitutions (master) http://qi-hw.com/p/eda-tools/fa20078 | 00:26 |
qi-bot | [commit] Werner Almesberger: b2/test/sub{break,cont}: code after named and unnamed jump is handled differently (master) http://qi-hw.com/p/eda-tools/ed8df3f | 00:26 |
qi-bot | [commit] Werner Almesberger: b2/lang.y (parse_jump): improve diagnostic for code after end/ignore (master) http://qi-hw.com/p/eda-tools/bca50f0 | 00:26 |
qi-bot | [commit] Werner Almesberger: b2/test/{subend,subign}: test end/ignore in substitutions (master) http://qi-hw.com/p/eda-tools/a522472 | 00:26 |
qi-bot | [commit] Adam Wang: to.fpd: added TO-263 variant (master) http://qi-hw.com/p/kicad-libs/27019d1 | 02:22 |
qi-bot | [commit] Adam Wang: tsop.fpd: added TSOP66 with a width of 400 mil chip (master) http://qi-hw.com/p/kicad-libs/4296dd4 | 06:14 |
qi-bot | [commit] Xiangfu: new package: xburst-tools: Tools for Ingenic XBurst CPU USB boot and NAND flash access (master) http://qi-hw.com/p/openwrt-packages/f7c9ae5 | 07:16 |
qi-bot | [commit] Xiangfu: xburst-tools: download the binary instead of compile (master) http://qi-hw.com/p/openwrt-packages/a4314b5 | 07:30 |
qi-bot | [commit] Adam Wang: ssop.fpd: added TSSOP14 variant and move marker placed at outside of left lower corner. (master) http://qi-hw.com/p/kicad-libs/f5c8b9b | 07:52 |
qi-bot | [commit] Xiangfu: xburst-tools: add libreadline depends (master) http://qi-hw.com/p/openwrt-packages/99ee6b1 | 08:25 |
qi-bot | [commit] Adam Wang: qfp.fpd: added QFP64 variant (master) http://qi-hw.com/p/kicad-libs/7009451 | 08:47 |
qi-bot | [commit] Werner Almesberger: b2/boom.c (main): run queries also if no variables are set (master) http://qi-hw.com/p/eda-tools/e919b16 | 05:14 |
---|---|---|
qi-bot | [commit] Werner Almesberger: b2/subst.c (dump_chunks): closing } was missing when dumping variable expansion (master) http://qi-hw.com/p/eda-tools/cae92bb | 05:14 |
qi-bot | [commit] Werner Almesberger: b2/: move implicit initialization of FN, F1, ... to explicit function subex_init (master) http://qi-hw.com/p/eda-tools/c6e3944 | 05:14 |
qi-bot | [commit] Werner Almesberger: b2/: resolve FN in subst_init and don't consider an FN match evidence of existance (master) http://qi-hw.com/p/eda-tools/c2414a5 | 05:14 |
qi-bot | [commit] Werner Almesberger: b2/: disallow assigning to FN (master) http://qi-hw.com/p/eda-tools/b35b6e2 | 05:14 |
qi-bot | [commit] Werner Almesberger: b2/test/: add first set of substitution tests (master) http://qi-hw.com/p/eda-tools/fb7b246 | 05:14 |
qi-bot | [commit] Paul Cercueil: MMC: JZ4740: Remove duplicated code. (jz-3.4) http://qi-hw.com/p/qi-kernel/92ca0b9 | 10:42 |
qi-bot | [commit] Paul Cercueil: MMC: JZ4740: Fix handling of read errors. (jz-3.4) http://qi-hw.com/p/qi-kernel/c36b5d5 | 11:05 |
qi-bot | [commit] Werner Almesberger: b2/subst.c (prepare_re): recognize % in union pattern (master) http://qi-hw.com/p/eda-tools/e93ff0e | 16:32 |
qi-bot | [commit] Werner Almesberger: b2/: introduce unit pattern (##), for dimensionless values (master) http://qi-hw.com/p/eda-tools/cc895fe | 16:32 |
qi-bot | [commit] Werner Almesberger: b2/test/: more substitution tests (master) http://qi-hw.com/p/eda-tools/12b21f0 | 16:32 |
qi-bot | [commit] Werner Almesberger: b2/: add regular expression conversion debugging (option -R) (master) http://qi-hw.com/p/eda-tools/da1010f | 16:32 |
qi-bot | [commit] Werner Almesberger: b2/test/Common: also provide empty hierarchy if the input is empty; name the file (master) http://qi-hw.com/p/eda-tools/4a586fc | 16:32 |
qi-bot | [commit] Werner Almesberger: b2/test/subesc: test regexp escaping in substitutions (master) http://qi-hw.com/p/eda-tools/3f4a068 | 16:32 |
qi-bot | [commit] Werner Almesberger: b2/: add "print VAR" command in substitutions (for debugging/tracing) (master) http://qi-hw.com/p/eda-tools/ee0a2a4 | 16:32 |
qi-bot | [commit] Werner Almesberger: b2/subex.c (compose): search "out" variables before "in" variables (master) http://qi-hw.com/p/eda-tools/31c1c58 | 16:32 |
qi-bot | [commit] Werner Almesberger: b2/test/subcont: test "continue" in substitutions (master) http://qi-hw.com/p/eda-tools/e56a71e | 16:32 |
qi-bot | [commit] Werner Almesberger: b2/: rename a bit too general "dump" to "dump_param" (master) http://qi-hw.com/p/eda-tools/b723c88 | 08:57 |
---|---|---|
qi-bot | [commit] Werner Almesberger: b2/: new option -dCHARS to dump specific db; replaces use of -v (master) http://qi-hw.com/p/eda-tools/3ebac68 | 08:57 |
qi-bot | [commit] Werner Almesberger: b2/boom.c (main): rearrange to reduce indentation depth (master) http://qi-hw.com/p/eda-tools/be1277e | 08:57 |
qi-bot | [commit] Werner Almesberger: b2/db.c: new function parts_dump to dump the whole parts database (master) http://qi-hw.com/p/eda-tools/2241276 | 08:57 |
qi-bot | [commit] Werner Almesberger: b2/: move parts dumping from lang.y to boom.c and make optional (-dc) (master) http://qi-hw.com/p/eda-tools/f09e4b2 | 08:57 |
qi-bot | [commit] Werner Almesberger: b2/test/Common: support multiple files of the same kind (!-c1, !-c2, etc.) (master) http://qi-hw.com/p/eda-tools/69701f4 | 08:57 |
qi-bot | [commit] Werner Almesberger: b2/lang.y (part): show part ID in error message (master) http://qi-hw.com/p/eda-tools/ea57323 | 08:57 |
qi-bot | [commit] Werner Almesberger: b2/test/char: part characteristics database test (master) http://qi-hw.com/p/eda-tools/dd727b1 | 08:57 |
qi-bot | [commit] Werner Almesberger: fisl2011/Makefile (DL): Atben_atusb_prod_03.jpg was missing (master) http://qi-hw.com/p/wernermisc/8418a19 | 18:43 |
qi-bot | [commit] Werner Almesberger: b2/test/curr: currency exchange test (master) http://qi-hw.com/p/eda-tools/0ba0abb | 23:44 |
qi-bot | [commit] Werner Almesberger: b2/lang.y (provider): don't allow provider to be redefined (master) http://qi-hw.com/p/eda-tools/994ed00 | 23:44 |
qi-bot | [commit] Werner Almesberger: b2/test/prov: provider database test (master) http://qi-hw.com/p/eda-tools/4184c01 | 23:44 |
qi-bot | [commit] Werner Almesberger: b2/test/Common (run_boom): place inventory after parts and currency (master) http://qi-hw.com/p/eda-tools/e62bb06 | 23:44 |
qi-bot | [commit] Werner Almesberger: b2/test/inv: inventory database test (master) http://qi-hw.com/p/eda-tools/cc5d9a9 | 23:44 |
qi-bot | [commit] Werner Almesberger: b2/: move substitutions dump from parser to boom.c (master) http://qi-hw.com/p/eda-tools/3027dac | 23:44 |
qi-bot | [commit] Werner Almesberger: b2/: insert a virtual empty hierarchy if test input starts with other file (master) http://qi-hw.com/p/eda-tools/d1593b6 | 23:44 |
qi-bot | [commit] Adam Wang: eus.fpd: smarter codes from Werner Almesberger (master) http://qi-hw.com/p/kicad-libs/b287ab5 | 08:25 |
---|---|---|
qi-bot | [commit] Werner Almesberger: b2/: introduce dimensionless values (field syntax: name=##) (master) http://qi-hw.com/p/eda-tools/d48a903 | 19:33 |
qi-bot | [commit] Werner Almesberger: b2/lang.y: '<' is rel_lt, not rel_le (master) http://qi-hw.com/p/eda-tools/d29e8a7 | 19:33 |
qi-bot | [commit] Werner Almesberger: b2/: simplified and corrected logic behind relop_redundant (master) http://qi-hw.com/p/eda-tools/9cafe23 | 19:33 |
qi-bot | [commit] Werner Almesberger: b2/test/hierred: test for redundant conditions (master) http://qi-hw.com/p/eda-tools/6d4c715 | 19:33 |
qi-bot | [commit] Werner Almesberger: ircstat/ML: add May 2012 traffic (master) http://qi-hw.com/p/wernermisc/108aff5 | 23:40 |
qi-bot | [commit] Jiva Nath Bagale: bug fix for guile2 Makefile (master) http://qi-hw.com/p/openwrt-packages/5e8a25e | 15:46 |
---|---|---|
qi-bot | [commit] Werner Almesberger: b2/test/hierfld: field definitions in hierarchy (master) http://qi-hw.com/p/eda-tools/ef60e92 | 19:54 |
qi-bot | [commit] Werner Almesberger: b2/: new option -v to control verbosity level; move hierarchy dump from parser to boom.c (master) http://qi-hw.com/p/eda-tools/b0ed436 | 19:54 |
qi-bot | [commit] Werner Almesberger: b2/test/Common: drop that tacky "file-" prefix in pseudo-filenames (master) http://qi-hw.com/p/eda-tools/52e58cc | 19:54 |
qi-bot | [commit] Werner Almesberger: b2/new function yywarn; make yyerror reuse yyerrorf (master) http://qi-hw.com/p/eda-tools/2239440 | 19:54 |
qi-bot | [commit] Werner Almesberger: b2/: add test for redundant conditions in hierarchy (master) http://qi-hw.com/p/eda-tools/39382b1 | 19:54 |
qi-bot | [commit] Werner Almesberger: b2/Makefile: run tests with bash, not with sh (master) http://qi-hw.com/p/eda-tools/4943519 | 19:54 |
qi-bot | [commit] Werner Almesberger: b2/lang.y: don't pop fields from the stack before also handling the rule (master) http://qi-hw.com/p/eda-tools/a892b63 | 19:54 |
qi-bot | [commit] Werner Almesberger: b2/dump.c (dump_rel): use %g also for tolerances in percent (master) http://qi-hw.com/p/eda-tools/6159bdf | 19:54 |
qi-bot | [commit] Werner Almesberger: b2/eval.c (eval_rel): fix stop pointer when parsing absolute tolerance values (master) http://qi-hw.com/p/eda-tools/8c26e5f | 19:54 |
qi-bot | [commit] Werner Almesberger: b2/test/hierrul: field rules in hierarchy (master) http://qi-hw.com/p/eda-tools/e66267f | 19:54 |
qi-bot | [commit] Werner Almesberger: Merge branch 'master' of projects.qi-hardware.com:eda-tools (master) http://qi-hw.com/p/eda-tools/4fb5f26 | 19:54 |
qi-bot | [commit] Werner Almesberger: modules/qfp-gen.fpd: further improvements (WIP) (master) http://qi-hw.com/p/kicad-libs/20b7c5f | 00:54 |
---|---|---|
qi-bot | [commit] Adam Wang: INFO: clean up by order (master) http://qi-hw.com/p/kicad-libs/e3556ca | 04:06 |
qi-bot | [commit] Adam Wang: Merge branch 'master' of projects.qi-hardware.com:kicad-libs (master) http://qi-hw.com/p/kicad-libs/8b151f1 | 04:06 |
qi-bot | [commit] Adam Wang: eus.fpd: added new EUS for TI PTH04000WAH footprint (master) http://qi-hw.com/p/kicad-libs/4cc64c9 | 04:07 |
qi-bot | [commit] Werner Almesberger: ircstat/ML: April 2012 figures (belatedly - forgot to commit) (master) http://qi-hw.com/p/wernermisc/bd8c84d | 16:07 |
qi-bot | [commit] Werner Almesberger: ircstat/stat: move source file and filter to a variable (master) http://qi-hw.com/p/wernermisc/70b01eb | 16:07 |
qi-bot | [commit] Werner Almesberger: separate dumping of hierchy rules from dumping of fields (master) http://qi-hw.com/p/eda-tools/b6a4a80 | 16:07 |
qi-bot | [commit] Werner Almesberger: new option -N to override file names in diagnostics (for regression testing) (master) http://qi-hw.com/p/eda-tools/60de30c | 16:07 |
qi-bot | [commit] Werner Almesberger: add regression test infrastructure (master) http://qi-hw.com/p/eda-tools/88ad25e | 16:07 |
qi-bot | [commit] Werner Almesberger: test/hierfld: field definitions in hierarchy (master) http://qi-hw.com/p/eda-tools/c24da02 | 16:07 |
qi-bot | [commit] Werner Almesberger: new option -v to control verbosity level; move hierarchy dump from parser to boom.c (master) http://qi-hw.com/p/eda-tools/59d21e6 | 16:07 |
qi-bot | [commit] Adam Wang: ir.fpd: added front edge silkscreen (master) http://qi-hw.com/p/kicad-libs/b88a133 | 01:19 |
---|---|---|
qi-bot | [commit] Adam Wang: tsop.fpd: added new TSOP module (master) http://qi-hw.com/p/kicad-libs/dfcaa9d | 02:35 |
qi-bot | [commit] Werner Almesberger: reset reachable_pkg in the instantiation process and restore on inst_revert (master) http://qi-hw.com/p/fped/59b90b3 | 02:59 |
qi-bot | [commit] Adam Wang: tsop.fpd: added 28 and 32 pins option (master) http://qi-hw.com/p/kicad-libs/d0f16e9 | 03:55 |
qi-bot | [commit] Adam Wang: added to-252 link (master) http://qi-hw.com/p/kicad-libs/b8f4df3 | 03:59 |
qi-bot | [commit] Werner Almesberger: modules/qfp-gen.fpd: QFP modules generated from IPC-7351 formulas (WIP) (master) http://qi-hw.com/p/kicad-libs/6a24272 | 04:33 |
qi-bot | [commit] Werner Almesberger: Merge branch 'master' of projects.qi-hardware.com:kicad-libs (master) http://qi-hw.com/p/kicad-libs/b977bc9 | 04:33 |
qi-bot | [commit] Werner Almesberger: atben/atben.sch, atusb/atrf.sch: correct and clarify ESR of X1 (reported by Wolfgang Spraul) (master) http://qi-hw.com/p/ben-wpan/42f1a78 | 05:50 |
qi-bot | [commit] Adam Wang: to.fpd: added TO-252 package (master) http://qi-hw.com/p/kicad-libs/9762038 | 10:50 |
qi-bot | [commit] Adam Wang: Merge branch 'master' of projects.qi-hardware.com:kicad-libs (master) http://qi-hw.com/p/kicad-libs/983ee35 | 10:50 |
qi-bot | [commit] Werner Almesberger: test/floor: add two real-life-like rounding problems (mil to mm) (master) http://qi-hw.com/p/fped/9115444 | 01:25 |
---|---|---|
qi-bot | [commit] Werner Almesberger: add %iprint, to track variables during instantiation (master) http://qi-hw.com/p/fped/3c39600 | 01:25 |
qi-bot | [commit] Werner Almesberger: introduce keyed tables (?var syntax; WIP) (master) http://qi-hw.com/p/fped/3488cf8 | 01:25 |
qi-bot | [commit] Werner Almesberger: test/tsort: fix permission (wasn't excecutable) (master) http://qi-hw.com/p/fped/101bd11 | 01:25 |
qi-bot | [commit] Adam Wang: added SOIC footprints: 8, 14 and 16 pins. (master) http://qi-hw.com/p/kicad-libs/f077efe | 05:54 |
qi-bot | [commit] Werner Almesberger: gui_frame.c: display a question mark before variables used as key (master) http://qi-hw.com/p/fped/326a480 | 05:58 |
qi-bot | [commit] Werner Almesberger: support switching variables between assignment and key (WIP) (master) http://qi-hw.com/p/fped/4c3dea7 | 05:58 |
qi-bot | [commit] Adam Wang: ir.fpd: added IR receiver footprint (master) http://qi-hw.com/p/kicad-libs/e92838c | 13:17 |
qi-bot | [commit] Werner Almesberger: fix whitespace anomalies (master) http://qi-hw.com/p/fped/f2d3986 | 15:16 |
qi-bot | [commit] Werner Almesberger: make variable type changes also commit the value (name) being edited (master) http://qi-hw.com/p/fped/5d76af2 | 15:16 |
qi-bot | [commit] Werner Almesberger: add floor() function (master) http://qi-hw.com/p/fped/9a6c7d2 | 17:14 |
---|
qi-bot | [commit] Adam Wang: qfp.fpd: added Maxim C48 and Analog Device ST-48 variant (master) http://qi-hw.com/p/kicad-libs/bd5c1c3 | 10:20 |
---|---|---|
qi-bot | [commit] Adam Wang: Merge branch 'master' of projects.qi-hardware.com:kicad-libs (master) http://qi-hw.com/p/kicad-libs/61fecbd | 10:20 |
qi-bot | [commit] Adam Wang: qfp.fpd: get rid of the AD land patter and rename variant to name (master) http://qi-hw.com/p/kicad-libs/d4be1a4 | 10:38 |
qi-bot | [commit] Adam Wang: INFO: removed AD QFP info (master) http://qi-hw.com/p/kicad-libs/6c2655c | 10:40 |
qi-bot | [commit] Jiva Nath Bagale: fixed guile2 Makefile to use guile from toolchain instead of host machine (master) http://qi-hw.com/p/openwrt-packages/e88e68e | 16:13 |
qi-bot | [commit] Werner Almesberger: bacon/prog/: simple PIC 18F{2,4}xJxx programmer (for the Ben Nanonote) (master) http://qi-hw.com/p/wernermisc/6bdfea6 | 16:56 |
qi-bot | [commit] Werner Almesberger: change use of curly braces with "if-else" to kernel style (master) http://qi-hw.com/p/fped/424b74e | 23:32 |
qi-bot | [commit] Werner Almesberger: inst.h (FOR_PKG_INSTS): protect against active_pkg == NULL (master) http://qi-hw.com/p/fped/b06ed92 | 23:32 |
qi-bot | [commit] Werner Almesberger: make active package track active variables (for the GUI) (master) http://qi-hw.com/p/fped/e0351bd | 23:32 |
qi-bot | [commit] Werner Almesberger: atusb/usb.sch: bring back USB_A_PLUG (was lost for an unknown reason) (master) http://qi-hw.com/p/ben-wpan/65f1454 | 02:51 |
---|---|---|
qi-bot | [commit] Werner Almesberger: b2/: use -Wextra (and fix places where this caused trouble) (master) http://qi-hw.com/p/eda-tools/24abc2c | 03:11 |
qi-bot | [commit] Werner Almesberger: b2/: use -Wshadow (and fix the place where this caused trouble) (master) http://qi-hw.com/p/eda-tools/8759410 | 03:11 |
qi-bot | [commit] Werner Almesberger: b2/: use -Wmissing-prototypes and -Wmissing-declarations (master) http://qi-hw.com/p/eda-tools/c582c47 | 03:11 |
qi-bot | [commit] Werner Almesberger: b2/extract-symbols: extract cref-symbol map from KiCad schematics (master) http://qi-hw.com/p/eda-tools/7717e7f | 03:11 |
qi-bot | [commit] Werner Almesberger: b2/lang.l: allow commas (,) in words (master) http://qi-hw.com/p/eda-tools/5fb156a | 03:11 |
qi-bot | [commit] Werner Almesberger: b2/param.c: new function merge_vars to merge prioritized lists of variables (master) http://qi-hw.com/p/eda-tools/1e21ea8 | 03:11 |
qi-bot | [commit] Werner Almesberger: b2/bom.c (bom_subst): include input variables in the part's list of variables (master) http://qi-hw.com/p/eda-tools/2ce3b7f | 03:11 |
qi-bot | [commit] Werner Almesberger: b2/extract-symbols: don't strip leading / from directory (master) http://qi-hw.com/p/eda-tools/9b12778 | 04:47 |
qi-bot | [commit] Werner Almesberger: schhist/sanitize-{profile,schem}: "dirname" logic was reversed (master) http://qi-hw.com/p/eda-tools/e943baf | 04:47 |
qi-bot | [commit] Werner Almesberger: modules/qfp.fnp: change pad width X1 from 0.55 to 0.45 mm (reported by Adam Wang) (master) http://qi-hw.com/p/kicad-libs/6ee60a4 | 13:09 |
qi-bot | [commit] Werner Almesberger: modules/ssop.fpd: added TSSOP-20 and pad center-to-center measurement (master) http://qi-hw.com/p/kicad-libs/53d5b0c | 21:53 |
qi-bot | [commit] Werner Almesberger: modules/INFO: updated URLs for "ssop" (master) http://qi-hw.com/p/kicad-libs/6377381 | 21:53 |
qi-bot | [commit] Adam Wang: INFO: added tag F: mdip (master) http://qi-hw.com/p/kicad-libs/d18ba26 | 03:00 |
---|---|---|
qi-bot | [commit] Werner Almesberger: schhist/schhist2web: correct handling of deferred columns (master) http://qi-hw.com/p/eda-tools/78bcb8d | 04:53 |
qi-bot | [commit] Adam Wang: mdip.fpd: added. (master) http://qi-hw.com/p/kicad-libs/ba2a95b | 06:48 |
qi-bot | [commit] Adam Wang: mdip.fpd: 1) set mil unit 2) added measurements 3) set width = 355 mil (master) http://qi-hw.com/p/kicad-libs/c1811e3 | 09:30 |
qi-bot | [commit] Werner Almesberger: b2/subex.c (compose): use stralloc_n instead of open-coding its functionality (master) http://qi-hw.com/p/eda-tools/db279b7 | 21:43 |
qi-bot | [commit] Werner Almesberger: b2/boom.c (usage): -Q wasn't mentioned; explain -q and -Q (master) http://qi-hw.com/p/eda-tools/7c8fc30 | 21:43 |
qi-bot | [commit] Werner Almesberger: b2/: add parsing of KiCad eeschema BOMs (option -b) (master) http://qi-hw.com/p/eda-tools/ddd22ba | 21:43 |
qi-bot | [commit] Werner Almesberger: b2/bom.c (bom_parse_line): check that components reference are unique (master) http://qi-hw.com/p/eda-tools/9445f2c | 21:43 |
qi-bot | [commit] Werner Almesberger: b2/util.c: new function unique_n for strings limited by length and not NUL (master) http://qi-hw.com/p/eda-tools/b9066c6 | 21:43 |
qi-bot | [commit] Werner Almesberger: b2/subst.c (parse_var): use unique_n (master) http://qi-hw.com/p/eda-tools/a537cc5 | 21:43 |
qi-bot | [commit] Werner Almesberger: b2/: add parsing of supplemental symbol information (option -X) (master) http://qi-hw.com/p/eda-tools/f223789 | 21:43 |
qi-bot | [commit] Werner Almesberger: b2/bom.h (struct bom): remove unused "next" pointer (master) http://qi-hw.com/p/eda-tools/4fb17f6 | 21:43 |
qi-bot | [commit] Werner Almesberger: b2/: run variable substitution on BOM entries (untested) (master) http://qi-hw.com/p/eda-tools/ec04163 | 21:43 |
qi-bot | [commit] Werner Almesberger: b2/: add BOM dumping; dump processed BOM entries (master) http://qi-hw.com/p/eda-tools/66aea07 | 21:43 |
qi-bot | [commit] Werner Almesberger: b2/: move all error handling from subex to subst (master) http://qi-hw.com/p/eda-tools/3ad6c2c | 00:25 |
---|---|---|
qi-bot | [commit] Werner Almesberger: b2/: add relop to struct param, in preparation of merge with struct var (master) http://qi-hw.com/p/eda-tools/fdac542 | 00:25 |
qi-bot | [commit] Werner Almesberger: b2/: rename "name" field in struct value to more generic "s", for better sharing (master) http://qi-hw.com/p/eda-tools/061e8f5 | 00:25 |
qi-bot | [commit] Werner Almesberger: b2/: use (general) "struct param" to replace (specialized) "struct var" (master) http://qi-hw.com/p/eda-tools/c1b6b2a | 00:25 |
qi-bot | [commit] Werner Almesberger: b2/: move basic handling of variables from subex to param (master) http://qi-hw.com/p/eda-tools/4a3e517 | 00:25 |
qi-bot | [commit] Werner Almesberger: b2/db.c: add (somewhat crude) parametric part selection (master) http://qi-hw.com/p/eda-tools/bcf4696 | 00:25 |
qi-bot | [commit] Werner Almesberger: b2/boom.c: add parametric part selection (with option -Q) (master) http://qi-hw.com/p/eda-tools/256a096 | 00:25 |
qi-bot | [commit] Werner Almesberger: b2/: correct some whitespace anomalies (master) http://qi-hw.com/p/eda-tools/2c5850e | 02:30 |
qi-bot | [commit] Werner Almesberger: b2/eval.c (decode_mult): also support "G" prefix (master) http://qi-hw.com/p/eda-tools/2014e60 | 02:30 |
qi-bot | [commit] Werner Almesberger: b2/: add "ignore" keyword for substitution rules (master) http://qi-hw.com/p/eda-tools/d2171eb | 02:30 |
qi-bot | [commit] Adam Wang: dip.fpd, dip4of6.fpd: copied both from /labsw/modules (master) http://qi-hw.com/p/kicad-libs/9c6b38d | 03:37 |
qi-bot | [commit] Maarten ter Huurne: Re-enable zram and zcache on MIPS. (jz-3.4) http://qi-hw.com/p/qi-kernel/262b3bc | 12:39 |
qi-bot | [commit] Maarten ter Huurne: MIPS: A320: defconfig: Re-enable zram in kernel config. (jz-3.4) http://qi-hw.com/p/qi-kernel/58d1111 | 15:05 |
qi-bot | [commit] Werner Almesberger: b2/subst.c (prepare_re): fail on bad (#unit) syntax instead of ignoring (master) http://qi-hw.com/p/eda-tools/2946b83 | 16:54 |
qi-bot | [commit] Werner Almesberger: b2/: meta-variable $ for "previously matched variable" (master) http://qi-hw.com/p/eda-tools/3d2eca3 | 16:54 |
qi-bot | [commit] Werner Almesberger: b2/: regexec puts first substring into pmatch[1] and not pmatch[0] (master) http://qi-hw.com/p/eda-tools/148d5e8 | 16:54 |
qi-bot | [commit] Werner Almesberger: b2/: use re_nsub instead of maintaining our own equivalent (master) http://qi-hw.com/p/eda-tools/2170278 | 16:54 |
qi-bot | [commit] Werner Almesberger: b2/subst.c (resolve_jump): use pointer comparison instead of strcmp (master) http://qi-hw.com/p/eda-tools/2ce2da5 | 19:21 |
qi-bot | [commit] Werner Almesberger: b2/: make "again" include the match; make "break" pop the stack (master) http://qi-hw.com/p/eda-tools/bb809b0 | 19:21 |
qi-bot | [commit] Werner Almesberger: b2/: rename "again" to "continue" (master) http://qi-hw.com/p/eda-tools/107280b | 19:21 |
qi-bot | [commit] Werner Almesberger: b2/: make the match name after "break" and "continue" optional (master) http://qi-hw.com/p/eda-tools/694d48b | 19:21 |
qi-bot | [commit] Werner Almesberger: b2/: for consistency, make "break/continue $" equivalent to "break/continue" (master) http://qi-hw.com/p/eda-tools/4f142c1 | 19:21 |
qi-bot | [commit] Werner Almesberger: b2/Makefile: generate dependencies also for YACC- and LEX-generated files (master) http://qi-hw.com/p/eda-tools/c9bd26a | 19:21 |
qi-bot | [commit] Werner Almesberger: Makefile: generate dependencies also for YACC- and LEX-generated files (master) http://qi-hw.com/p/fped/6623ae1 | 19:21 |
qi-bot | [commit] Werner Almesberger: b2/: add parsing of substitution rules (WIP) (master) http://qi-hw.com/p/eda-tools/9fd1dc5 | 03:26 |
---|---|---|
qi-bot | [commit] Werner Almesberger: b2/: add processing of substitution rules (master) http://qi-hw.com/p/eda-tools/fd14c52 | 03:26 |
qi-bot | [commit] Werner Almesberger: b2/: export field hierarchy and substitution rules from lang.y (master) http://qi-hw.com/p/eda-tools/04d858e | 03:26 |
qi-bot | [commit] Werner Almesberger: b2/boom.c: add substitution query mode (option -q) (master) http://qi-hw.com/p/eda-tools/8e6357f | 03:26 |
qi-bot | [commit] Werner Almesberger: b2/: move variable-length strings to vstring.[ch], for sharing (master) http://qi-hw.com/p/eda-tools/4e39ca2 | 03:26 |
qi-bot | [commit] Werner Almesberger: b2/subst.c: use vstring for modified regexp (master) http://qi-hw.com/p/eda-tools/9681d44 | 03:26 |
qi-bot | [commit] Werner Almesberger: b2/: use glob syntax instead of RE syntax for substitutions (master) http://qi-hw.com/p/eda-tools/adecef8 | 03:26 |
qi-bot | [commit] Werner Almesberger: b2/: finish unit handling and move most of its processing to the match side (master) http://qi-hw.com/p/eda-tools/99e5777 | 03:26 |
qi-bot | [commit] Werner Almesberger: b2/: move relational operators to relop.[ch] (for sharing) (master) http://qi-hw.com/p/eda-tools/a34702c | 03:26 |
qi-bot | [commit] Werner Almesberger: b2/: assigments to can express inequalities (master) http://qi-hw.com/p/eda-tools/6fd5313 | 03:26 |
qi-bot | [commit] Werner Almesberger: modules/stdpass.fpd: remove -M variants (master) http://qi-hw.com/p/kicad-libs/92a8467 | 03:41 |
qi-bot | [commit] Werner Almesberger: labsw/modules/spacer.fpd: changed pad to "bare" (no solder paste); added measurements (master) http://qi-hw.com/p/wernermisc/a9a0011 | 04:02 |
qi-bot | [commit] Xiangfu: cgminer: add a simple monitor file for cron job (master) http://qi-hw.com/p/openwrt-packages/f12878f | 10:05 |
---|
qi-bot | [commit] Xiangfu: cgminer: update to 2.4.1 (master) http://qi-hw.com/p/openwrt-packages/5b1da6f | 05:03 |
---|---|---|
qi-bot | [commit] Xiangfu: cgminer: sleep 10s before cgminer start, this make Utility display correct (master) http://qi-hw.com/p/openwrt-packages/b3d4ed7 | 05:03 |
qi-bot | [commit] Xiangfu: cgminer: sleep 10s before cgminer start, this make Utility display correct (master) http://qi-hw.com/p/openwrt-packages/1eeb495 | 05:12 |
qi-bot | [commit] Xiangfu: cgminer revert sleep before start cgminer, work around under rc.local (master) http://qi-hw.com/p/openwrt-packages/21c0314 | 05:30 |
qi-bot | [commit] Xiangfu: cgminer: hotplug.d sleep 8 before start cgminer fix the MHS display wrong on api (master) http://qi-hw.com/p/openwrt-packages/48ca65d | 06:35 |
qi-bot | [commit] Xiangfu: cgminer sleep 30s for ntpd update time (master) http://qi-hw.com/p/openwrt-packages/a459845 | 10:05 |
qi-bot | [commit] Adam Wang: micrel.lib: MIC2550AYTS pin1 name changed to VIF (master) http://qi-hw.com/p/kicad-libs/e7e9f17 | 01:14 |
---|---|---|
qi-bot | [commit] Adam Wang: din_5_2s.lib: added texts for name numbering (master) http://qi-hw.com/p/kicad-libs/7038620 | 01:49 |
qi-bot | [commit] Adam Wang: CONN_10X2: set pin name invisible. (master) http://qi-hw.com/p/kicad-libs/541d4db | 01:50 |
qi-bot | [commit] Adam Wang: 6N138: added arrows (master) http://qi-hw.com/p/kicad-libs/25bc402 | 02:15 |
qi-bot | [commit] Adam Wang: AP21X2A: more spacing between text lines (master) http://qi-hw.com/p/kicad-libs/c912dfd | 02:45 |
qi-bot | [commit] Adam Wang: js28f256j3f105.lib: pin 43, pin name changed to VCCQ (master) http://qi-hw.com/p/kicad-libs/bbab963 | 11:51 |
---|---|---|
qi-bot | [commit] Adam Wang: Merge branch 'master' of projects.qi-hardware.com:kicad-libs (master) http://qi-hw.com/p/kicad-libs/4be16e3 | 11:51 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: SLCD: Fixed sysfs tvout value parsing. (jz-3.3) http://qi-hw.com/p/qi-kernel/f20d896 | 13:28 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: SLCD: Ignore sysfs rewrite of current TV-out mode (jz-3.3) http://qi-hw.com/p/qi-kernel/0a96d72 | 13:28 |
qi-bot | [commit] Xiangfu: m1-files. remove mjpg-streamer. useless for m1 (master) http://qi-hw.com/p/openwrt-packages/e1dab76 | 01:39 |
---|---|---|
qi-bot | [commit] Xiangfu: m1/patches/rtems: refresh (master) http://qi-hw.com/p/wernermisc/b6b61b1 | 04:38 |
qi-bot | [commit] Werner Almesberger: schhist/schhist2web: correctly align shared columns (master) http://qi-hw.com/p/eda-tools/d8f5c95 | 01:09 |
---|---|---|
qi-bot | [commit] Paul Cercueil: MIPS: JZ4740: SLCD: Toggle TV-out through /sys instead of ioctl. (jz-3.3) http://qi-hw.com/p/qi-kernel/6068b05 | 19:05 |
qi-bot | [commit] Paul Cercueil: MIPS: JZ4740: SLCD: lock the console before blanking on TV-out. (jz-3.3) http://qi-hw.com/p/qi-kernel/589e559 | 19:05 |
qi-bot | [commit] Werner Almesberger: schhist/sanitize-profile: treat LibDir as a list (master) http://qi-hw.com/p/eda-tools/9365a23 | 03:53 |
---|---|---|
qi-bot | [commit] Xiangfu: add mjpg-streamer config (master) http://qi-hw.com/p/openwrt-packages/1982f9a | 04:25 |
qi-bot | [commit] Xiangfu: cgminer update to 2.4.0 (master) http://qi-hw.com/p/openwrt-packages/ce88966 | 04:25 |
qi-bot | [commit] Xiangfu: cgmier: update it automatic detect icarus (master) http://qi-hw.com/p/openwrt-packages/6867d67 | 04:25 |
qi-bot | [commit] Xiangfu: cgminer: cgminer now working with pool that don't provide midstate (master) http://qi-hw.com/p/openwrt-packages/5f04289 | 04:25 |
qi-bot | [commit] Xiangfu: cgmienr: update POOL1 to ozco.in (master) http://qi-hw.com/p/openwrt-packages/f3e7354 | 04:25 |
qi-bot | [commit] Xiangfu: cgmienr: add usb hotplug for Icarus (master) http://qi-hw.com/p/openwrt-packages/81a4549 | 04:25 |
qi-bot | [commit] Werner Almesberger: schhist/schhist2web: truncate commit entries after 300 characters (master) http://qi-hw.com/p/eda-tools/b7816b9 | 05:51 |
qi-bot | [commit] Werner Almesberger: schhist2web: column sharing with SCHHIST_ORDER=...:first=next=...:... (WIP) (master) http://qi-hw.com/p/eda-tools/1468a33 | 05:51 |
qi-bot | [commit] Werner Almesberger: schhist/schhist2web (ordered_names): fix typo in pattern (master) http://qi-hw.com/p/eda-tools/cc5732b | 06:18 |
qi-bot | [commit] Adam Wang: oscillator-cmos-out-4.lib: changed four text size to 0.05" (master) http://qi-hw.com/p/kicad-libs/c14fd25 | 01:43 |
---|---|---|
qi-bot | [commit] Adam Wang: zener.lib: changed both pin name and pin number to A or C (master) http://qi-hw.com/p/kicad-libs/060e907 | 02:17 |
qi-bot | [commit] Adam Wang: zener.lib: naming a new chip name ZENER-13 (master) http://qi-hw.com/p/kicad-libs/dd40518 | 04:02 |
qi-bot | [commit] Werner Almesberger: components/EXPAND: add ZENER-13 (master) http://qi-hw.com/p/kicad-libs/cfe8f85 | 11:17 |
qi-bot | [commit] Adam Wang: SN75HVD12D: combined two texts so that pdf generating without cross line (master) http://qi-hw.com/p/kicad-libs/a314a0c | 07:12 |
---|---|---|
qi-bot | [commit] Adam Wang: diodes_inc.lib: invisual pin name and use text for them with suitable gap. (master) http://qi-hw.com/p/kicad-libs/e3c98d2 | 07:35 |
qi-bot | [commit] Adam Wang: molex.lib: DVI-I female pins assignment was illustrated by real female socket of front view instead pin name( let them invisible ). (master) http://qi-hw.com/p/kicad-libs/8c47913 | 08:49 |
qi-bot | [commit] Werner Almesberger: cameo/test/: move to cameo/test/1/ (master) http://qi-hw.com/p/cae-tools/fcb508f | 02:52 |
---|---|---|
qi-bot | [commit] Werner Almesberger: cameo: add two test cases (exhibiting brokenness) (master) http://qi-hw.com/p/cae-tools/c2bfbd5 | 02:52 |
qi-bot | [commit] Werner Almesberger: poly2d/: Yet another 2D polygon library (WIP) (master) http://qi-hw.com/p/cae-tools/dfa8507 | 02:52 |
qi-bot | [commit] Adam Wang: SN75HVD12D: invisual pin name and use text for them with suitable gap. (master) http://qi-hw.com/p/kicad-libs/1584a4c | 12:29 |
qi-bot | [commit] Paul Cercueil: OpenDingux: initrd: Update mininit to the latest version. (jz-3.3) http://qi-hw.com/p/qi-kernel/9af15eb | 12:38 |
qi-bot | [commit] Adam Wang: MIC2550AYTS: invisual pin name and use text for them with suitable gap. (master) http://qi-hw.com/p/kicad-libs/d04dcb9 | 12:41 |
qi-bot | [commit] Maarten ter Huurne: MIPS: Removed declaration of obsolete arch_init_clk_ops() (jz-3.3) http://qi-hw.com/p/qi-kernel/77dbab1 | 01:19 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: Acquire and enable DMA controller clock (jz-3.3) http://qi-hw.com/p/qi-kernel/759e3e2 | 01:19 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: Correct clock gate bit for DMA controller (jz-3.3) http://qi-hw.com/p/qi-kernel/bf21f89 | 23:49 |
---|
qi-bot | [commit] Werner Almesberger: rescue files from svn.openmoko.org (master) http://qi-hw.com/p/eda-tools/881bf33 | 02:09 |
---|---|---|
qi-bot | [commit] Paul Cercueil: MIPS: JZ4740: LCD: Fixed LCD_CMD consts and completed LCD_STATE consts (jz-3.3) http://qi-hw.com/p/qi-kernel/b3353d6 | 22:53 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: SLCD: In TV-out mode, add a black line on top and bottom (jz-3.3) http://qi-hw.com/p/qi-kernel/1264672 | 22:53 |
qi-bot | [commit] Adam Wang: r.lib: reference & value -> 0.06" size (master) http://qi-hw.com/p/kicad-libs/882c9e6 | 10:07 |
---|---|---|
qi-bot | [commit] Werner Almesberger: b2/: add currency database (master) http://qi-hw.com/p/eda-tools/c3a6845 | 18:22 |
qi-bot | [commit] Werner Almesberger: b2/: add provider database (WIP) (master) http://qi-hw.com/p/eda-tools/82d532e | 18:22 |
qi-bot | [commit] Werner Almesberger: b2/: move file opening from boom.c to lang.l and combine setup code (master) http://qi-hw.com/p/eda-tools/9a06757 | 18:22 |
qi-bot | [commit] Werner Almesberger: b2/lang.l: print file name in diagnostics (master) http://qi-hw.com/p/eda-tools/5d7f4fc | 18:22 |
qi-bot | [commit] Werner Almesberger: b2/: connect stock to provider (master) http://qi-hw.com/p/eda-tools/702343c | 18:22 |
qi-bot | [commit] Adam Wang: pwr.lib: removed un-neccessary applicative power symbols. (master) http://qi-hw.com/p/kicad-libs/0336567 | 02:40 |
---|---|---|
qi-bot | [commit] Adam Wang: Merge branch 'master' of projects.qi-hardware.com:kicad-libs (master) http://qi-hw.com/p/kicad-libs/1eedf4e | 02:40 |
qi-bot | [commit] Werner Almesberger: components/EXPAND: remove application-specific power symbols (master) http://qi-hw.com/p/kicad-libs/c47df78 | 03:17 |
qi-bot | [commit] Adam Wang: analog_devices.lib: changed pins to inverted style. (master) http://qi-hw.com/p/kicad-libs/ef27518 | 09:05 |
qi-bot | [commit] Adam Wang: Merge branch 'master' of projects.qi-hardware.com:kicad-libs (master) http://qi-hw.com/p/kicad-libs/f93e43f | 09:05 |
qi-bot | [commit] Werner Almesberger: b2/: normalize relative values to 1, not 100 (master) http://qi-hw.com/p/eda-tools/edcc61a | 23:41 |
qi-bot | [commit] Werner Almesberger: b2/: dump part records (for debugging only) (master) http://qi-hw.com/p/eda-tools/6c49fdd | 23:41 |
qi-bot | [commit] Werner Almesberger: b2/: make top-level hierarchy item an action, not just a rule (master) http://qi-hw.com/p/eda-tools/1394c6b | 23:41 |
qi-bot | [commit] Werner Almesberger: b2/: add parsing of part inventories (WIP) (master) http://qi-hw.com/p/eda-tools/e99a9f4 | 23:41 |
qi-bot | [commit] Werner Almesberger: b2/: add options to set file type on the command line (master) http://qi-hw.com/p/eda-tools/450769e | 23:41 |
qi-bot | [commit] Werner Almesberger: b2/: add dumping of stock information (master) http://qi-hw.com/p/eda-tools/24a3252 | 23:41 |
qi-bot | [commit] Werner Almesberger: b2/: choose better names for creator functions in chr.c (master) http://qi-hw.com/p/eda-tools/3fff937 | 01:56 |
---|---|---|
qi-bot | [commit] Werner Almesberger: b2/: add syntax switch (master) http://qi-hw.com/p/eda-tools/1817efd | 01:56 |
qi-bot | [commit] Werner Almesberger: b2/boom.c: move opening of file as stdin to separate function (master) http://qi-hw.com/p/eda-tools/08b1ed1 | 01:56 |
qi-bot | [commit] Werner Almesberger: b2/: add parsing of part characteristics (WIP) (master) http://qi-hw.com/p/eda-tools/90e541c | 01:56 |
qi-bot | [commit] Werner Almesberger: b2/lang.l: reset lineno for new file and count newlines in comment (master) http://qi-hw.com/p/eda-tools/98f2fc8 | 01:56 |
qi-bot | [commit] Werner Almesberger: b2/: allow ...% to be recognized as a single WORD (for values) (master) http://qi-hw.com/p/eda-tools/433b03a | 01:56 |
qi-bot | [commit] Werner Almesberger: b2/: moved declarations of diagnostic functions from util.h to lang.h (master) http://qi-hw.com/p/eda-tools/8aa94ed | 01:56 |
qi-bot | [commit] Werner Almesberger: b2/: new diagnostic function yywarnf (master) http://qi-hw.com/p/eda-tools/eabe0dc | 01:56 |
qi-bot | [commit] Werner Almesberger: b2/bitset.h: fix logic of bitset_empty (master) http://qi-hw.com/p/eda-tools/b172117 | 01:56 |
qi-bot | [commit] Werner Almesberger: b2/: add parameter conversion (master) http://qi-hw.com/p/eda-tools/331fbdd | 01:56 |
qi-bot | [commit] Werner Almesberger: b2/Makefile: target "try" to run the example setup (master) http://qi-hw.com/p/eda-tools/c92ba6f | 01:56 |
qi-bot | [commit] Werner Almesberger: b2/db.c (part_add): fix jumbled initialization mess (master) http://qi-hw.com/p/eda-tools/e7b2e65 | 01:56 |
qi-bot | [commit] Maarten ter Huurne: fbcon: Tweaks to non-ASCII characters in 6x10 font (jz-3.3) http://qi-hw.com/p/qi-kernel/2284faa | 07:34 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: Use title case for Dingoo link titles. (master) http://qi-hw.com/p/gmenu2x/e5a9227 | 11:01 |
qi-bot | [commit] Adam Wang: pwr.lib: fixed pin name (master) http://qi-hw.com/p/kicad-libs/5140476 | 02:44 |
---|---|---|
qi-bot | [commit] Adam Wang: js28f256j3f105.lib: removed duplicated pin22 (master) http://qi-hw.com/p/kicad-libs/f0ec97a | 03:02 |
qi-bot | [commit] Adam Wang: AD1580: changed pin text size -> 0.05" (master) http://qi-hw.com/p/kicad-libs/8eb467b | 03:42 |
qi-bot | [commit] Adam Wang: con.lib: fixed reference name, pin number/name -> 0.05", and correct style (master) http://qi-hw.com/p/kicad-libs/a8f30be | 04:17 |
qi-bot | [commit] Adam Wang: diodes_inc.lib: AP21X2A -> changed to nRESET and FLG pins to inverted style. (master) http://qi-hw.com/p/kicad-libs/1df0097 | 06:00 |
qi-bot | [commit] Adam Wang: c.lib: changed reference & name size -> 0.06" (master) http://qi-hw.com/p/kicad-libs/42172b7 | 06:20 |
qi-bot | [commit] Adam Wang: din_5_2s.lib: changed reference, pin name, pin number size. (master) http://qi-hw.com/p/kicad-libs/a4e7c54 | 06:26 |
qi-bot | [commit] Adam Wang: diode, fairchild, filter, hole, ir.lib: changed reference, pin name, pin number size. (master) http://qi-hw.com/p/kicad-libs/8cc36e6 | 06:50 |
qi-bot | [commit] Adam Wang: micrel.lib: changed pins types and styles (master) http://qi-hw.com/p/kicad-libs/3e8eabb | 08:20 |
qi-bot | [commit] Adam Wang: led, microphone, molex, nxp, pptc, rca, switch, zener, xlr-3, ti, varistor.lib: changed pins types and styles. (master) http://qi-hw.com/p/kicad-libs/1c7a85c | 09:34 |
qi-bot | [commit] Adam Wang: js28f256j3f105.lib: changed pin style (master) http://qi-hw.com/p/kicad-libs/411609d | 10:45 |
qi-bot | [commit] Adam Wang: 67298-4090: making pins aligned to 50 mil grid (master) http://qi-hw.com/p/kicad-libs/b45bade | 13:14 |
qi-bot | [commit] Maarten ter Huurne: fbcon: Add 6x10 font (jz-3.3) http://qi-hw.com/p/qi-kernel/b13e7eb | 14:50 |
qi-bot | [commit] Werner Almesberger: components/EXPAND: trace AVR-M1005C080MTACB to VARISTOR name change (master) http://qi-hw.com/p/kicad-libs/541e543 | 15:11 |
qi-bot | [commit] Maarten ter Huurne: fbcon: Tweaked menuconfig help for 6x10 font (jz-3.3) http://qi-hw.com/p/qi-kernel/aa23d3a | 15:33 |
qi-bot | [commit] Maarten ter Huurne: MIPS: A320: defconfig: Switch to 6x10 font (jz-3.3) http://qi-hw.com/p/qi-kernel/6f86cc9 | 15:33 |
qi-bot | [commit] Paul Cercueil: Read the credits from the "about.txt" file. (master) http://qi-hw.com/p/gmenu2x/c2576d4 | 15:58 |
qi-bot | [commit] Paul Cercueil: dingux: added a link to disable the graphic mode of the framebuffer (master) http://qi-hw.com/p/gmenu2x/45595e2 | 15:58 |
qi-bot | [commit] Maarten ter Huurne: fbcon: Tweaked 6x10 font (jz-3.3) http://qi-hw.com/p/qi-kernel/0a90ed3 | 23:18 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: SLCD: Add PAL-M mode for TV-out. (jz-3.3) http://qi-hw.com/p/qi-kernel/8212949 | 02:17 |
---|---|---|
qi-bot | [commit] Werner Almesberger: fpd.l: make start_token "static" (master) http://qi-hw.com/p/fped/6547384 | 05:56 |
qi-bot | [commit] Adam Wang: TESTPOINT: reference and name size -> 0.06". (master) http://qi-hw.com/p/kicad-libs/4723d7c | 12:02 |
qi-bot | [commit] Paul Cercueil: dingux: added a link to toggle TV output. (master) http://qi-hw.com/p/gmenu2x/8dbf6f6 | 17:38 |
qi-bot | [commit] Adam Wang: ADV7125KSTZ140: changed its pin 13, 29, 30 (VAA) back to correct 'Power input' (master) http://qi-hw.com/p/kicad-libs/a59f005 | 05:53 |
---|---|---|
qi-bot | [commit] Adam Wang: removed application power symbols, they could be replaced by POWERED symbol( in POWERED.lib ) (master) http://qi-hw.com/p/kicad-libs/acad34a | 06:03 |
qi-bot | [commit] Werner Almesberger: components/EXPAND: removed project-specific power symbols (ETH_PLL1V8, etc.) (master) http://qi-hw.com/p/kicad-libs/8ae9db5 | 11:26 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: Fixed value for round robin constant. (jz-3.3) http://qi-hw.com/p/qi-kernel/0de2b2b | 13:37 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: SLCD: TV-out related cleanups. (jz-3.3) http://qi-hw.com/p/qi-kernel/e7de309 | 13:37 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: SLCD: Add PAL-60 mode for TV-out. (jz-3.3) http://qi-hw.com/p/qi-kernel/0ff1964 | 13:37 |
qi-bot | [commit] Werner Almesberger: b2/Makefile: add dependency generation (.d method) (master) http://qi-hw.com/p/eda-tools/9d5c698 | 22:39 |
qi-bot | [commit] Werner Almesberger: b2/Makefile: remove y.output on "make clean" (master) http://qi-hw.com/p/eda-tools/c274c1d | 22:39 |
qi-bot | [commit] Werner Almesberger: b2/Makefile: add "spotless" target (master) http://qi-hw.com/p/eda-tools/7fe553a | 22:39 |
qi-bot | [commit] Werner Almesberger: b2/: first tentative version of hierarchy parser, with example (master) http://qi-hw.com/p/eda-tools/6bb8b03 | 22:39 |
qi-bot | [commit] Werner Almesberger: b2/: syntax change: use = for instead of : for format declarations (master) http://qi-hw.com/p/eda-tools/75479a8 | 22:39 |
qi-bot | [commit] Werner Almesberger: b2/HIERARCHY: add diodes, to make the example more interesting (master) http://qi-hw.com/p/eda-tools/45196de | 22:39 |
qi-bot | [commit] Werner Almesberger: b2/: add C-style comments (master) http://qi-hw.com/p/eda-tools/b3c865e | 22:39 |
qi-bot | [commit] Adam Wang: changed VDDPLL, VDDRCV, VDDRX to input instead of Power input since a common power network generates local net/lable as usual. (master) http://qi-hw.com/p/kicad-libs/e6d4981 | 01:34 |
---|---|---|
qi-bot | [commit] Adam Wang: changed FLG1/2 pins to output/Line. (master) http://qi-hw.com/p/kicad-libs/be5f5bf | 01:43 |
qi-bot | [commit] Adam Wang: changed HSWAPEN to input which pin controls the internal pull-up resistors on all of the user I/O pins from power-on through completion of configuration. A Low level applied to the pin during configuration enables the internal pull-up resistors, while a High level disables them. (master) http://qi-hw.com/p/kicad-libs/18ae19f | 02:03 |
qi-bot | [commit] Adam Wang: Revert "changed VDDPLL, VDDRCV, VDDRX to input instead of Power input since a common power network generates local net/lable as usual." (master) http://qi-hw.com/p/kicad-libs/6291bf5 | 02:52 |
qi-bot | [commit] Adam Wang: pwr.lib : added VIDEOIN_A3V3, VIDEOIN_A1V8, ETH_A3V3, ETH_A1V8, ETH_PLL1V8 for application power. (master) http://qi-hw.com/p/kicad-libs/1bff27c | 02:52 |
qi-bot | [commit] Adam Wang: pwr.lib : added IR_PWR, VAA_3V3 for application power. (master) http://qi-hw.com/p/kicad-libs/e117f71 | 03:57 |
qi-bot | [commit] Werner Almesberger: components/EXPAND: added latest application-specific power symbols (master) http://qi-hw.com/p/kicad-libs/dec1eee | 07:18 |
qi-bot | [commit] Adam Wang: changed to upper case. (master) http://qi-hw.com/p/kicad-libs/cf35956 | 07:28 |
qi-bot | [commit] Adam Wang: Merge branch 'master' of projects.qi-hardware.com:kicad-libs (master) http://qi-hw.com/p/kicad-libs/e33b87a | 07:28 |
qi-bot | [commit] Adam Wang: changed ADV7125KSTZ140's pin 13/29/30 to input (master) http://qi-hw.com/p/kicad-libs/f8b3e2d | 08:50 |
qi-bot | [commit] Werner Almesberger: components: added powered.lib (POWERED), to replace PWR_FLG (master) http://qi-hw.com/p/kicad-libs/43585b4 | 09:32 |
qi-bot | [commit] Werner Almesberger: components/powered.lib: reduced pin length (master) http://qi-hw.com/p/kicad-libs/867b8f9 | 10:12 |
qi-bot | [commit] Adam Wang: molex.lib: 74320-1004 -> removed duplicated pins (master) http://qi-hw.com/p/kicad-libs/dc58a6f | 12:40 |
qi-bot | [commit] Werner Almesberger: bin/pidiff: position-independent diff filter (master) http://qi-hw.com/p/wernermisc/9a31615 | 22:34 |
qi-bot | [commit] Adam Wang: changed ADV7125KSTZ140's IOR, IOG, IOB, ~IOR, ~IOG, ~IOB type (master) http://qi-hw.com/p/kicad-libs/8405898 | 01:55 |
---|
qi-bot | [commit] Adam Wang: fixed LP38511TJ-ADJ's GND to power input (master) http://qi-hw.com/p/kicad-libs/f36ddbf | 12:46 |
---|---|---|
qi-bot | [commit] Adam Wang: changed JS28F256J3F105's BYTE as Input (master) http://qi-hw.com/p/kicad-libs/261b470 | 13:01 |
qi-bot | [commit] Adam Wang: changed MIC2550AYTS's VTRM to Power input (master) http://qi-hw.com/p/kicad-libs/2c9b9b4 | 13:09 |
qi-bot | [commit] Adam Wang: changed testpin to Passive (master) http://qi-hw.com/p/kicad-libs/966affe | 13:14 |
qi-bot | [commit] Adam Wang: changed MT46V32M16P's VREF to input. (master) http://qi-hw.com/p/kicad-libs/9cd6b11 | 13:22 |
qi-bot | [commit] Adam Wang: added diode.lib (master) http://qi-hw.com/p/kicad-libs/0fa17f6 | 02:41 |
---|---|---|
qi-bot | [commit] Adam Wang: Merge branch 'master' of projects.qi-hardware.com:kicad-libs (master) http://qi-hw.com/p/kicad-libs/8e136ef | 02:41 |
qi-bot | [commit] Adam Wang: fixed non-ASCII texts (master) http://qi-hw.com/p/kicad-libs/b01d671 | 03:54 |
qi-bot | [commit] Adam Wang: for better looking (master) http://qi-hw.com/p/kicad-libs/fec2275 | 07:58 |
qi-bot | [commit] Xiangfu: update CON7x2 (master) http://qi-hw.com/p/kicad-libs/9af36fd | 09:49 |
qi-bot | [commit] Werner Almesberger: components/EXPAND: added DIODE (master) http://qi-hw.com/p/kicad-libs/969b4d8 | 14:09 |
qi-bot | [commit] Adam Wang: set pins electircal type to Power input (master) http://qi-hw.com/p/kicad-libs/94a5fe5 | 14:28 |
qi-bot | [commit] Adam Wang: Merge branch 'master' of projects.qi-hardware.com:kicad-libs (master) http://qi-hw.com/p/kicad-libs/1e1555e | 14:28 |
qi-bot | [commit] Adam Wang: ir.lib -> removed BZX84 (master) http://qi-hw.com/p/kicad-libs/da2b1e9 | 02:59 |
---|---|---|
qi-bot | [commit] Adam Wang: Merge branch 'master' of projects.qi-hardware.com:kicad-libs (master) http://qi-hw.com/p/kicad-libs/1665a34 | 02:59 |
qi-bot | [commit] Adam Wang: missed IO_L60N_3 (master) http://qi-hw.com/p/kicad-libs/8d49b6e | 07:15 |
qi-bot | [commit] Adam Wang: added hole.lib for mechanical hole (master) http://qi-hw.com/p/kicad-libs/bdd4755 | 09:57 |
qi-bot | [commit] Adam Wang: rename description and keyword as MH_1 (master) http://qi-hw.com/p/kicad-libs/b6c7e5a | 10:03 |
qi-bot | [commit] Werner Almesberger: components/EXPAND: added MH (mounting hole) (master) http://qi-hw.com/p/kicad-libs/e32fc74 | 22:36 |
qi-bot | [commit] Paul Cercueil: Switch to tty1 for console apps (Dingux build only). (master) http://qi-hw.com/p/gmenu2x/d1328d7 | 00:26 |
---|---|---|
qi-bot | [commit] Paul Cercueil: Removed full path to skin files on the links (master) http://qi-hw.com/p/gmenu2x/d227a8a | 00:26 |
qi-bot | [commit] Paul Cercueil: dingux: added a "system info" link on the settings tab. (master) http://qi-hw.com/p/gmenu2x/a4e25cb | 00:26 |
qi-bot | [commit] Paul Cercueil: dingux: added a link to "alsamixer". (master) http://qi-hw.com/p/gmenu2x/4d3310f | 00:26 |
qi-bot | [commit] Paul Cercueil: dingux: renamed links on "settings" to force menu layout (master) http://qi-hw.com/p/gmenu2x/454a73d | 00:26 |
qi-bot | [commit] Werner Almesberger: genex/comp.c (read_desc): component missing in tree yields a warning, not error (master) http://qi-hw.com/p/eda-tools/1d47668 | 00:28 |
qi-bot | [commit] Werner Almesberger: scripts/dcm2desc: script to convert comments from .dcm files to genex descriptions (master) http://qi-hw.com/p/kicad-libs/33f9ac4 | 00:31 |
qi-bot | [commit] Werner Almesberger: components/Makefile: new targets "catalog", "clean", and "spotless" (master) http://qi-hw.com/p/kicad-libs/03ca12f | 00:31 |
qi-bot | [commit] Werner Almesberger: genex: option -D to dump all canonical component names (for missing-in-tree) (master) http://qi-hw.com/p/eda-tools/7d97a74 | 01:19 |
qi-bot | [commit] Werner Almesberger: components/scripts/missing-in-tree: script to list components not in hierarchy (master) http://qi-hw.com/p/kicad-libs/f602b3a | 01:19 |
qi-bot | [commit] Werner Almesberger: components/Makefile: target "missing" to list components missing in EXPAND (master) http://qi-hw.com/p/kicad-libs/9aff31b | 01:20 |
qi-bot | [commit] Werner Almesberger: components/EXPAND: add conn_4, conn_7x2, MEMCARD8, SCJ368R1NUS0B00G (master) http://qi-hw.com/p/kicad-libs/f1474c0 | 01:30 |
qi-bot | [commit] Werner Almesberger: components/Makefile: new target "view" to view the catalog (master) http://qi-hw.com/p/kicad-libs/3e7c34b | 01:30 |
qi-bot | [commit] Adam Wang: given better 100 mil gap between pins and orders (master) http://qi-hw.com/p/kicad-libs/2cdfafd | 03:57 |
qi-bot | [commit] Adam Wang: Merge branch 'master' of projects.qi-hardware.com:kicad-libs (master) http://qi-hw.com/p/kicad-libs/0b47784 | 03:57 |
qi-bot | [commit] Adam Wang: con.lib: added CONN_3 (master) http://qi-hw.com/p/kicad-libs/3277f0b | 07:13 |
qi-bot | [commit] Adam Wang: con.dcm : added empty .dcm (master) http://qi-hw.com/p/kicad-libs/fc4e71a | 07:28 |
qi-bot | [commit] Adam Wang: con.lib -> added CONN_2, CONN_10X2 (master) http://qi-hw.com/p/kicad-libs/8a05b9b | 12:42 |
qi-bot | [commit] Werner Almesberger: components/EXPAND: added conn_2, conn_3, conn_10x2 (master) http://qi-hw.com/p/kicad-libs/9a68e1b | 21:48 |
qi-bot | [commit] Werner Almesberger: components/Makefile: improved dependencies; target "upload" to upload catalog (master) http://qi-hw.com/p/kicad-libs/8459988 | 21:48 |
qi-bot | [commit] Werner Almesberger: genex: add progress reporting, and option -q to turn it off (master) http://qi-hw.com/p/eda-tools/e804e02 | 21:48 |
qi-bot | [commit] Werner Almesberger: m1/BUILD-CHEAT-SHEET: removed RTEMS/YAFFS pinning; added known to be good versions (master) http://qi-hw.com/p/wernermisc/31ba2e4 | 23:13 |
qi-bot | [commit] Adam Wang: renamed bnc.* -> rca.* (master) http://qi-hw.com/p/kicad-libs/89b4541 | 01:26 |
---|---|---|
qi-bot | [commit] Adam Wang: changed pin13 of KSZ8001L to Power output type (master) http://qi-hw.com/p/kicad-libs/8066c7c | 01:50 |
qi-bot | [commit] Adam Wang: added 4V3 (master) http://qi-hw.com/p/kicad-libs/7155d6b | 07:02 |
qi-bot | [commit] Adam Wang: added zener.lib (master) http://qi-hw.com/p/kicad-libs/124917c | 08:26 |
qi-bot | [commit] Adam Wang: moved R_PACK4 from pptc.lib to r.lib (master) http://qi-hw.com/p/kicad-libs/87865af | 08:43 |
qi-bot | [commit] Werner Almesberger: genex/genex.c (usage): describe options (master) http://qi-hw.com/p/eda-tools/b6b4c99 | 09:09 |
qi-bot | [commit] Werner Almesberger: genex: added reading of files containing supplemental descriptions (master) http://qi-hw.com/p/eda-tools/1b7ace9 | 09:09 |
qi-bot | [commit] Werner Almesberger: genex/genex.c: new option -d to dump the tree instead of making a PDF (master) http://qi-hw.com/p/eda-tools/904a60f | 09:09 |
qi-bot | [commit] Werner Almesberger: genex/pdf.c: added printing of comments (master) http://qi-hw.com/p/eda-tools/3f3d957 | 09:09 |
qi-bot | [commit] Adam Wang: added dc_jack.lib (master) http://qi-hw.com/p/kicad-libs/f7d5c03 | 09:09 |
qi-bot | [commit] Werner Almesberger: genex/: added example set of comments (on WM9707SCFT/V) (master) http://qi-hw.com/p/eda-tools/34095c7 | 10:53 |
qi-bot | [commit] Werner Almesberger: genex/pdf.c: use central format definition (master) http://qi-hw.com/p/eda-tools/5a8606b | 10:53 |
qi-bot | [commit] Werner Almesberger: genex/pdf.c: only use pipe, not stdout in parallel (master) http://qi-hw.com/p/eda-tools/a553d58 | 10:53 |
qi-bot | [commit] Werner Almesberger: genex/pdf.c: generalized page geometry setup (master) http://qi-hw.com/p/eda-tools/7f0bf74 | 11:11 |
qi-bot | [commit] Werner Almesberger: genex/pdf.c: changed page orientation from landscape to portrait (master) http://qi-hw.com/p/eda-tools/8e8a3c5 | 11:11 |
qi-bot | [commit] Werner Almesberger: genex: generate PDF by default; new option -P to generate Postscript (master) http://qi-hw.com/p/eda-tools/f8e10b3 | 12:03 |
qi-bot | [commit] Werner Almesberger: genex: changed default orientation back to landscape; option -p for portrait (master) http://qi-hw.com/p/eda-tools/0565adf | 12:03 |
qi-bot | [commit] Werner Almesberger: genex/run: updated for new usage (master) http://qi-hw.com/p/eda-tools/72846f1 | 12:03 |
qi-bot | [commit] Werner Almesberger: genex: add parsing and dumping of alias names (master) http://qi-hw.com/p/eda-tools/db903c1 | 12:03 |
qi-bot | [commit] Werner Almesberger: genex/pdf.c: output aliases also to PDF (master) http://qi-hw.com/p/eda-tools/8eb3e88 | 12:03 |
qi-bot | [commit] Werner Almesberger: genex/comp.c (read_tree): correct scanning of names (master) http://qi-hw.com/p/eda-tools/a1d5e2d | 12:55 |
qi-bot | [commit] Werner Almesberger: genex/libs.c: skip ~ at the beginning of a component name (master) http://qi-hw.com/p/eda-tools/024ffd4 | 12:55 |
qi-bot | [commit] Werner Almesberger: genex/sym2xps: also accept components names beginning with ~ (master) http://qi-hw.com/p/eda-tools/7de800e | 12:55 |
qi-bot | [commit] Werner Almesberger: genex/expand-pintype: preserve a tile at the beginning of a component name (master) http://qi-hw.com/p/eda-tools/3703852 | 12:55 |
qi-bot | [commit] Werner Almesberger: components/EXPAND: component hierarchy for expanded views (master) http://qi-hw.com/p/kicad-libs/43194e6 | 12:57 |
qi-bot | [commit] Werner Almesberger: components/: added a bunch of experimental components (master) http://qi-hw.com/p/kicad-libs/00b7d62 | 13:42 |
qi-bot | [commit] Werner Almesberger: components/components.pro: renamed "bnc" to "rca" (master) http://qi-hw.com/p/kicad-libs/800da2b | 13:48 |
qi-bot | [commit] Xiangfu: add CONN_5, CONN_7X2 and MEMCARD8 (master) http://qi-hw.com/p/kicad-libs/6f376ee | 14:01 |
qi-bot | [commit] Xiangfu: change CONN_5 to CONN_4, add ./con to .pro file (master) http://qi-hw.com/p/kicad-libs/aec1456 | 14:08 |
qi-bot | [commit] Xiangfu: con.lib: CONN_4: add more space between pins (master) http://qi-hw.com/p/kicad-libs/5e24059 | 14:48 |
qi-bot | [commit] Werner Almesberger: genex/Makefile: add "spotless" target (master) http://qi-hw.com/p/eda-tools/41448e8 | 21:17 |
qi-bot | [commit] Werner Almesberger: genex/Makefile: add dependency generation (.d method) (master) http://qi-hw.com/p/eda-tools/40a76e1 | 21:17 |
qi-bot | [commit] Werner Almesberger: genex/: "genex" is now a wrapper that sets PATH, then calls genex-bin (master) http://qi-hw.com/p/eda-tools/fff142c | 21:17 |
qi-bot | [commit] Werner Almesberger: genex: added install/uninstall targets and wrapper generator (master) http://qi-hw.com/p/eda-tools/54ecc10 | 21:17 |
qi-bot | [commit] Werner Almesberger: components/: added dual_trans.lib, with pre-biased Panasonic XP series BJTs (master) http://qi-hw.com/p/kicad-libs/95b8394 | 23:32 |
qi-bot | [commit] Werner Almesberger: components/dual_diode.dcm: we even have descriptions ! (master) http://qi-hw.com/p/kicad-libs/af949dc | 23:32 |
qi-bot | [commit] Werner Almesberger: components/: add ft232rl.lib (from f32xbase/c2usb) (master) http://qi-hw.com/p/kicad-libs/c418be1 | 23:32 |
qi-bot | [commit] Werner Almesberger: components/: components from wernermisc/labsw (opto-couplers, a relay) (master) http://qi-hw.com/p/kicad-libs/d13404a | 23:32 |
qi-bot | [commit] Werner Almesberger: components/: add sw4.lib from wernermisc/f10 (master) http://qi-hw.com/p/kicad-libs/7b46af4 | 23:32 |
qi-bot | [commit] Werner Almesberger: components/: 74hc04-3.lib from wernermisc/zprobe (master) http://qi-hw.com/p/kicad-libs/4f3b57a | 23:32 |
qi-bot | [commit] Werner Almesberger: components/: components from ben-wpan (antenna, xtal, AT86RF23x, and balun) (master) http://qi-hw.com/p/kicad-libs/b68ddec | 23:32 |
qi-bot | [commit] Werner Almesberger: components/EXPAND: updated for new components (master) http://qi-hw.com/p/kicad-libs/0dae7f1 | 23:32 |
qi-bot | [commit] Werner Almesberger: Merge branch 'master' of projects.qi-hardware.com:kicad-libs (master) http://qi-hw.com/p/kicad-libs/994e3a8 | 23:32 |
qi-bot | [commit] Xiangfu: split common to c/r/led for follow one lib per symbol (master) http://qi-hw.com/p/kicad-libs/82f8429 | 01:12 |
---|---|---|
qi-bot | [commit] Adam Wang: added Xiangfu's new libraries for symbols (master) http://qi-hw.com/p/kicad-libs/9f18a29 | 01:40 |
qi-bot | [commit] Adam Wang: added pwr.lib (master) http://qi-hw.com/p/kicad-libs/b622799 | 01:41 |
qi-bot | [commit] Adam Wang: saved a 0.06" text size font (master) http://qi-hw.com/p/kicad-libs/0144a65 | 02:36 |
qi-bot | [commit] Adam Wang: changed +3.3V to 3V3 text (master) http://qi-hw.com/p/kicad-libs/5cc6353 | 02:58 |
qi-bot | [commit] Adam Wang: added 1V2, 1V8, 2V5, 5V, USBEXT5V symbols (master) http://qi-hw.com/p/kicad-libs/3f80466 | 03:12 |
qi-bot | [commit] Adam Wang: changed TP's reference text to size 0.06" (master) http://qi-hw.com/p/kicad-libs/8b1d180 | 03:32 |
qi-bot | [commit] Adam Wang: added chip name "C_P" with polarized symbol (master) http://qi-hw.com/p/kicad-libs/6065798 | 04:06 |
qi-bot | [commit] Adam Wang: added con.lib (master) http://qi-hw.com/p/kicad-libs/5bed93e | 06:03 |
qi-bot | [commit] Adam Wang: added GND, AUDIO_AGND, VIDEOIN_AGND symbols (master) http://qi-hw.com/p/kicad-libs/6012de1 | 07:10 |
qi-bot | [commit] Adam Wang: added filter.lib to include FB (master) http://qi-hw.com/p/kicad-libs/f0c590a | 07:35 |
qi-bot | [commit] Adam Wang: added crystal.lib (master) http://qi-hw.com/p/kicad-libs/a0f1bf0 | 08:45 |
qi-bot | [commit] Xiangfu: new components switch, take from default device (master) http://qi-hw.com/p/kicad-libs/ef60239 | 09:31 |
qi-bot | [commit] Xiangfu: merge fsmra2jh.lib and switch.lib (master) http://qi-hw.com/p/kicad-libs/7b8cb31 | 09:58 |
qi-bot | [commit] Adam Wang: added bnc, switch, filter (master) http://qi-hw.com/p/kicad-libs/0c0c8ea | 13:24 |
qi-bot | [commit] Werner Almesberger: m1/patches/rtems/series: fix typo in date (xx0xx -> xx-xx) (master) http://qi-hw.com/p/wernermisc/08302e5 | 19:56 |
---|---|---|
qi-bot | [commit] Werner Almesberger: BUILD-CHEAT-SHEET: added pinning for rtems and rtems-yaffs2 (master) http://qi-hw.com/p/wernermisc/981374b | 20:28 |
qi-bot | [commit] Adam Wang: changed AP2142ASG-13's package 8-SOIC to SO-8 (master) http://qi-hw.com/p/wernermisc/af618b2 | 02:01 |
---|---|---|
qi-bot | [commit] Adam Wang: Merge branch 'master' of projects.qi-hardware.com:wernermisc (master) http://qi-hw.com/p/wernermisc/ef5fa7e | 02:01 |
qi-bot | [commit] Xiangfu: new package libzip (master) http://qi-hw.com/p/openwrt-packages/a7dc528 | 03:02 |
qi-bot | [commit] Xiangfu: bard: DEPENDS, add libzip for EPUB support (master) http://qi-hw.com/p/openwrt-packages/bed9012 | 03:02 |
qi-bot | [commit] Xiangfu: gmenu2x icon: remvoe pickpdf (master) http://qi-hw.com/p/openwrt-packages/0ee9b4d | 03:11 |
qi-bot | [commit] Xiangfu: Revert "add common.lib include R, C, LED" (master) http://qi-hw.com/p/kicad-libs/422df1b | 08:01 |
qi-bot | [commit] Paul Cercueil: Removed the "wrapper" feature. (master) http://qi-hw.com/p/gmenu2x/7687212 | 17:21 |
qi-bot | [commit] Paul Cercueil: Added a "show console" link parameter (Dingux build only). (master) http://qi-hw.com/p/gmenu2x/e6ca072 | 17:21 |
qi-bot | [commit] Werner Almesberger: genex/: added support for multi-part components (master) http://qi-hw.com/p/eda-tools/0f0e732 | 03:06 |
---|---|---|
qi-bot | [commit] Werner Almesberger: genex/sym2xps: also translate and pass on text fields (master) http://qi-hw.com/p/eda-tools/e52c3cf | 03:06 |
qi-bot | [commit] Werner Almesberger: genex/sym2xps: also check that the unit parameter is present (master) http://qi-hw.com/p/eda-tools/3bbd0e7 | 03:06 |
qi-bot | [commit] Werner Almesberger: genex/sym2xps: use @ as regexp delimiter, to accommodate symbols names with / (master) http://qi-hw.com/p/eda-tools/dcee390 | 03:06 |
qi-bot | [commit] Xiangfu: nanonote files: we still need this gforth workaround (master) http://qi-hw.com/p/openwrt-packages/0b9b2b3 | 05:39 |
qi-bot | [commit] Xiangfu: reflash_ben.sh: remove useless -t option (master) http://qi-hw.com/p/openwrt-packages/891cce1 | 13:40 |
qi-bot | [commit] Maarten ter Huurne: Revert "MIPS: JZ4740: reset: Initialize hibernate wakeup counters." (jz-3.3) http://qi-hw.com/p/qi-kernel/b386be6 | 16:37 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: reset: Initialize hibernate wakeup counters. (jz-3.3) http://qi-hw.com/p/qi-kernel/ba6ccf4 | 16:37 |
qi-bot | [commit] Maarten ter Huurne: Revert "MIPS: Enable vmlinuz for JZ4740" (jz-3.3) http://qi-hw.com/p/qi-kernel/d1c6dd7 | 16:37 |
qi-bot | [commit] Lluís Batlle i Rossell: MIPS: Enable vmlinuz for JZ4740 (jz-3.3) http://qi-hw.com/p/qi-kernel/c1baa36 | 16:37 |
qi-bot | [commit] Maarten ter Huurne: ASoC: jz4740: A320: Add .owner to struct snd_soc_card (jz-3.3) http://qi-hw.com/p/qi-kernel/032d0e3 | 16:37 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: Use round robin DMA channel priority mode. (jz-3.3) http://qi-hw.com/p/qi-kernel/4bbb1ee | 16:37 |
qi-bot | [commit] Werner Almesberger: genex/: added page header with name, hierarchical path, and path to library (master) http://qi-hw.com/p/eda-tools/208d29b | 22:38 |
qi-bot | [commit] Werner Almesberger: genex/sym2xps: only add question mark to F0, not to all fields (master) http://qi-hw.com/p/eda-tools/1e5dbb4 | 22:38 |
qi-bot | [commit] Werner Almesberger: genex/pdf.c: rearranged header to show hierarchy first; balanced spacing (master) http://qi-hw.com/p/eda-tools/1a06314 | 22:38 |
qi-bot | [commit] kyak: directvnc: initial port (master) http://qi-hw.com/p/openwrt-packages/96cd146 | 05:36 |
---|---|---|
qi-bot | [commit] kyak: mplayer: disable faad explicitely (master) http://qi-hw.com/p/openwrt-packages/e07e941 | 07:51 |
qi-bot | [commit] Xiangfu: nanonote buils scripts file: add patch-openwrt.sh (master) http://qi-hw.com/p/openwrt-packages/caa7c09 | 08:22 |
qi-bot | [commit] Xiangfu: js28f256j3f105: add missing A8 pin (master) http://qi-hw.com/p/kicad-libs/1025859 | 10:43 |
qi-bot | [commit] Xiangfu: add testpoint (master) http://qi-hw.com/p/kicad-libs/a7b0a8b | 13:07 |
qi-bot | [commit] Xiangfu: add common.lib include R, C, LED (master) http://qi-hw.com/p/kicad-libs/75a4fba | 13:48 |
qi-bot | [commit] kyak: gmenu2x: update to latest git (master) http://qi-hw.com/p/openwrt-packages/7671b2b | 17:12 |
qi-bot | [commit] Werner Almesberger: kicad-patches/README: added quilt-based update process for KiCad (master) http://qi-hw.com/p/eda-tools/1a72c97 | 20:32 |
qi-bot | [commit] Werner Almesberger: kicad-patches/README: bump KiCad version to bzr 3494 (master) http://qi-hw.com/p/eda-tools/5083973 | 20:32 |
qi-bot | [commit] Werner Almesberger: m1/xbrd/: reduced CB from 25 mm to 22 mm, reducing overall length to 82.08 mm (master) http://qi-hw.com/p/wernermisc/5bf0b30 | 02:54 |
---|---|---|
qi-bot | [commit] Xiangfu: nanonote: config.minimal: disable spi_atusb since we don't have usb host (master) http://qi-hw.com/p/openwrt-packages/e702c87 | 07:57 |
qi-bot | [commit] Maarten ter Huurne: Fixed GCC warning about initialization order. (master) http://qi-hw.com/p/gmenu2x/92d221a | 18:39 |
qi-bot | [commit] Maarten ter Huurne: Don't overwrite link action provided to constructor. (master) http://qi-hw.com/p/gmenu2x/ed8b0c3 | 18:39 |
qi-bot | [commit] Maarten ter Huurne: SettingsDialog: Code layout cleanup. (master) http://qi-hw.com/p/gmenu2x/fd642ff | 20:58 |
qi-bot | [commit] Maarten ter Huurne: Surface cleanup. (master) http://qi-hw.com/p/gmenu2x/b248aaf | 20:58 |
qi-bot | [commit] Maarten ter Huurne: Touchscreen: Avoid constructing an SDL_Rect for is-inside tests. (master) http://qi-hw.com/p/gmenu2x/58d6077 | 20:58 |
qi-bot | [commit] Maarten ter Huurne: BrowseDialog: Code layout cleanup. (master) http://qi-hw.com/p/gmenu2x/46f2edb | 20:58 |
qi-bot | [commit] Maarten ter Huurne: Explicitly convert 32-bit integers to 16-bit. (master) http://qi-hw.com/p/gmenu2x/8f57afc | 20:58 |
qi-bot | [commit] Xiangfu: cgminer update to 2.3.2, update the BIT_ENDIAN patch (master) http://qi-hw.com/p/openwrt-packages/9d550b8 | 06:25 |
---|---|---|
qi-bot | [commit] Xiangfu: nanonote-files: cleanup the file structure. update version to 201204 (master) http://qi-hw.com/p/openwrt-packages/223a158 | 06:25 |
qi-bot | [commit] Xiangfu: naonote-files: split the gmenu2x icons to one package (master) http://qi-hw.com/p/openwrt-packages/65baf01 | 06:31 |
qi-bot | [commit] Xiangfu: nanonote-files: config.full_system include gmenu2x-icons (master) http://qi-hw.com/p/openwrt-packages/625f215 | 06:31 |
qi-bot | [commit] Xiangfu: nanonote-files: cleanup the file structure. move data/qi_lb60/files to package root (master) http://qi-hw.com/p/openwrt-packages/f74c593 | 06:40 |
qi-bot | [commit] Xiangfu: nanonote-files: compile-openwrt-xburst.sh update the files symlink (master) http://qi-hw.com/p/openwrt-packages/b2d577a | 06:43 |
qi-bot | [commit] Wolfgang Spraul: upleveled cmdline patches to kicad bzr 3493 (master) http://qi-hw.com/p/eda-tools/49d4ae6 | 06:38 |
---|---|---|
qi-bot | [commit] kyak: gcc-mips: correct md5sum (master) http://qi-hw.com/p/openwrt-packages/0bd9efe | 12:23 |
qi-bot | [commit] David Kühling: mplayer_jz47xx: upgrade to latest version with fixes for latest segfault problem (master) http://qi-hw.com/p/openwrt-packages/29d17cd | 02:50 |
---|---|---|
qi-bot | [commit] kyak: mplayer: get rid of X11 runtime dependency (master) http://qi-hw.com/p/openwrt-packages/f76d692 | 11:28 |
qi-bot | [commit] kyak: ben-cyrillic: add phonetic keymap (master) http://qi-hw.com/p/openwrt-packages/6240d22 | 17:22 |
qi-bot | [commit] Adam Wang: added MIC2550AYTS usb transceiver into micrel.lib (master) http://qi-hw.com/p/kicad-libs/2a25628 | 06:24 |
---|---|---|
qi-bot | [commit] Adam Wang: added symbol of AP21X2A dual channel power switch into diodes_inc.lib (master) http://qi-hw.com/p/kicad-libs/5bf49fc | 08:27 |
qi-bot | [commit] Adam Wang: added symbol of ADV7181C video decoder into analog_devices.lib (master) http://qi-hw.com/p/kicad-libs/f1b67f0 | 08:27 |
qi-bot | [commit] Werner Almesberger: ircstat/: end of March 2012 update (and new script to plot mailing lists) (master) http://qi-hw.com/p/wernermisc/1b9eddf | 17:16 |
qi-bot | [commit] kyak: gcc-mips: update to 4.6.2; fixed build (master) http://qi-hw.com/p/openwrt-packages/cb9c2cf | 18:41 |
qi-bot | [commit] Adam Wang: removed XTAL-4 (master) http://qi-hw.com/p/kicad-libs/0dbeea0 | 01:17 |
---|---|---|
qi-bot | [commit] Adam Wang: recorded/added libraries (master) http://qi-hw.com/p/kicad-libs/77a3a71 | 01:17 |
qi-bot | [commit] Xiangfu: nanonote-files: config.debug enable CONFIG_ALL for compile all packages (master) http://qi-hw.com/p/openwrt-packages/2f7f9bf | 01:43 |
qi-bot | [commit] Adam Wang: added LP38511TJ-ADJ, LP38690DT-xx, TPS763xx into ti.lib (master) http://qi-hw.com/p/kicad-libs/9a4745f | 04:27 |
qi-bot | [commit] Adam Wang: added pptc.lib (master) http://qi-hw.com/p/kicad-libs/40411fb | 04:27 |
qi-bot | [commit] Adam Wang: added MT46V32M16P in micron.lib (master) http://qi-hw.com/p/kicad-libs/082adc5 | 13:51 |
qi-bot | [commit] Adam Wang: added JS28F256J3F105 into micron.lib, added pptc.lib (master) http://qi-hw.com/p/kicad-libs/76d5cfc | 13:51 |
qi-bot | [commit] Adam Wang: added 67298-4090 USB CONN RECEPT USB STACKED R/A WHT HORIZONTAL THROUGH HOLE into molex.lib (master) http://qi-hw.com/p/kicad-libs/f26dac0 | 13:57 |
qi-bot | [commit] kyak: libcss: update to 0.1.2 (master) http://qi-hw.com/p/openwrt-packages/b53ab42 | 05:03 |
---|---|---|
qi-bot | [commit] kyak: libhubbub: update to 0.1.2 (master) http://qi-hw.com/p/openwrt-packages/18bd88f | 05:03 |
qi-bot | [commit] kyak: libnsfb: update to 0.0.2 (master) http://qi-hw.com/p/openwrt-packages/a347d74 | 05:03 |
qi-bot | [commit] kyak: libparserutils: update to 0.1.1 (master) http://qi-hw.com/p/openwrt-packages/e0300a0 | 05:03 |
qi-bot | [commit] kyak: libwapcaplet: update to 0.1.1 (master) http://qi-hw.com/p/openwrt-packages/e1e92f2 | 05:03 |
qi-bot | [commit] kyak: libnsbmp: initial port (master) http://qi-hw.com/p/openwrt-packages/aa543e6 | 05:03 |
qi-bot | [commit] kyak: libnsgif: initial port (master) http://qi-hw.com/p/openwrt-packages/fae1844 | 05:03 |
qi-bot | [commit] kyak: netsurf: update to 2.9 (master) http://qi-hw.com/p/openwrt-packages/a328712 | 05:03 |
qi-bot | [commit] kyak: Merge branch 'master' of projects.qi-hardware.com:openwrt-packages (master) http://qi-hw.com/p/openwrt-packages/b5ffbdf | 05:03 |
qi-bot | [commit] Adam Wang: correcting NC pins to Unspecified electrical type. (master) http://qi-hw.com/p/kicad-libs/b864df8 | 07:16 |
qi-bot | [commit] Adam Wang: correct Vcc to Power input electrical type (master) http://qi-hw.com/p/kicad-libs/55ba6c9 | 07:16 |
qi-bot | [commit] Adam Wang: added DIN_5_2S with two pin shields (master) http://qi-hw.com/p/kicad-libs/e43dcbe | 07:16 |
qi-bot | [commit] Xiangfu: nanonote-files: cleanup etc/ files (master) http://qi-hw.com/p/openwrt-packages/78095b1 | 10:28 |
qi-bot | [commit] Xiangfu: xburst: nanonote: move Ben special files to it's package (master) http://qi-hw.com/p/openwrt-xburst/c6e40d3 | 10:36 |
qi-bot | [commit] Xiangfu: nanonote-files: config.full_system: remove non-compile packages (master) http://qi-hw.com/p/openwrt-packages/4ff5437 | 10:39 |
qi-bot | [commit] Adam Wang: added 6N138, 8-Pin SMD Single-Channel Low Input Current High Gain Split Darlington Output Optocoupler (master) http://qi-hw.com/p/kicad-libs/de234eb | 10:42 |
qi-bot | [commit] Xiangfu: Revert "nanonote-files: config.full_system: remove non-compile packages" (master) http://qi-hw.com/p/openwrt-packages/e3b5136 | 10:55 |
qi-bot | [commit] Xiangfu: nanonote-files: remove nlove, jamvm, pygame. add libnl-tiny (master) http://qi-hw.com/p/openwrt-packages/83f3429 | 10:55 |
qi-bot | [commit] Xiangfu: mark nlove, offrss, pygame as @BROKEN (master) http://qi-hw.com/p/openwrt-packages/5a2adbf | 11:02 |
qi-bot | [commit] Xiangfu: move nanonote gmen2x icons from gmen2x.git to here (master) http://qi-hw.com/p/openwrt-packages/cb90452 | 11:08 |
qi-bot | [commit] Xiangfu: move all Ben Nanonote icons to it's nanonote-files packages (master) http://qi-hw.com/p/gmenu2x/a881e78 | 11:09 |
qi-bot | [commit] Xiangfu: gcc-mips mark as broken (master) http://qi-hw.com/p/openwrt-packages/7eb4f78 | 11:14 |
qi-bot | [commit] Xiangfu: nanonote-files: don't use manually edit config file (master) http://qi-hw.com/p/openwrt-packages/2b11c51 | 11:21 |
qi-bot | [commit] Adam Wang: added 1). BZX84 Voltage Regulator 2). SN75HVD12D RS-485 TRANSCEIVERS 3). JS28F256J3F105 FLASH (master) http://qi-hw.com/p/kicad-libs/a54fc4a | 12:12 |
qi-bot | [commit] Adam Wang: added 1). FSMRA2JH switch 2). IR 3). Oscillator 4). XLR 3 pole female/male receptacle (master) http://qi-hw.com/p/kicad-libs/e3ebf0a | 12:20 |
qi-bot | [commit] David Kühling: alfilesel: minor fixes (master) http://qi-hw.com/p/openwrt-packages/c3c191c | 00:02 |
---|---|---|
qi-bot | [commit] Adam Wang: 1. renamed wm9707scft.* to wolfson.* (master) http://qi-hw.com/p/kicad-libs/ff07877 | 11:05 |
qi-bot | [commit] Adam Wang: added Xilinx XC6SLX45-2FGG484C (master) http://qi-hw.com/p/kicad-libs/e2393f3 | 12:56 |
qi-bot | [commit] kyak: Revert "gmenu2x update to latest git commit date: 20120331" (master) http://qi-hw.com/p/openwrt-packages/cbd1c61 | 17:04 |
qi-bot | [commit] David Kühling: add new icons for mplayer, nupdf that start the app via 'alfilesel' (master) http://qi-hw.com/p/gmenu2x/7ab0e16 | 23:45 |
qi-bot | [commit] David Kühling: alfilesel: cleanup, fixes, add support for directly exec'ing applications (master) http://qi-hw.com/p/openwrt-packages/2a118e0 | 23:47 |
qi-bot | [commit] David Kühling: config.full_system: enable alfilesel file selector and stuff needed to build it (master) http://qi-hw.com/p/openwrt-packages/befba9a | 23:47 |
qi-bot | [commit] Adam Wang: removed 74AUP1G08GW,125 from diodes_inc.lib (master) http://qi-hw.com/p/kicad-libs/75930c9 | 01:51 |
---|---|---|
qi-bot | [commit] Adam Wang: Merge branch 'master' of projects.qi-hardware.com:kicad-libs (master) http://qi-hw.com/p/kicad-libs/c5dea10 | 01:51 |
qi-bot | [commit] kyak: fix previous commit disabling USB_SUPPORT (master) http://qi-hw.com/p/openwrt-xburst/ead188f | 15:25 |
qi-bot | [commit] kyak: config.full_system: enable shadowed password for busybox (master) http://qi-hw.com/p/openwrt-packages/53d162c | 17:22 |
qi-bot | [commit] David Kühling: alpy: fix package meta information (master) http://qi-hw.com/p/openwrt-packages/7b76631 | 23:48 |
qi-bot | [commit] David Kühling: new package alfilelsel: graphical file selector dialog for scripts and gmenu2x (master) http://qi-hw.com/p/openwrt-packages/7fca785 | 23:48 |
qi-bot | [commit] kyak: keymouse: keyboard is at event0 (master) http://qi-hw.com/p/openwrt-packages/fe3094b | 09:11 |
---|---|---|
qi-bot | [commit] David Kühling: alpy: fix crash-bug in remove_counter(), remove workarounds in demo.py (master) http://qi-hw.com/p/openwrt-packages/d439fec | 21:57 |
qi-bot | [commit] Werner Almesberger: makefiles/Makefile.kicad: updated for "new" command-line option names (master) http://qi-hw.com/p/ben-wpan/9ae2eb8 | 22:27 |
qi-bot | [commit] Werner Almesberger: cameo/excellon.c: recognize G90 code (absolute mode) (master) http://qi-hw.com/p/cae-tools/8ce420b | 22:28 |
qi-bot | [commit] Werner Almesberger: modules/zx62m-b-5p.fpd: Hirose ZX62M-B-5P Micro-USB receptacle (mid-mount) (master) http://qi-hw.com/p/kicad-libs/5171ee9 | 23:14 |
qi-bot | [commit] David Kühling: liballegro: compile png, jpeg, vorbis add-ons as shared libraries. (master) http://qi-hw.com/p/openwrt-packages/186242d | 00:03 |
---|---|---|
qi-bot | [commit] David Kühling: alpy: add support for loading jpeg and png files (master) http://qi-hw.com/p/openwrt-packages/74e63f2 | 00:03 |
qi-bot | [commit] Xiangfu: xburst: update Ben Nanonote config-3.2 (master) http://qi-hw.com/p/openwrt-xburst/b80244b | 03:29 |
qi-bot | [commit] Xiangfu: nanonote: add bard icon (master) http://qi-hw.com/p/gmenu2x/8da20f4 | 05:47 |
qi-bot | [commit] Xiangfu: gmenu2x update to latest git commit date: 20120331 (master) http://qi-hw.com/p/openwrt-packages/e8d435c | 05:53 |
qi-bot | [commit] David Kühling: alpy: some more patching, make exmples python scripts work & package them (master) http://qi-hw.com/p/openwrt-packages/1353ef0 | 00:40 |
---|---|---|
qi-bot | [commit] Adam Wang: ignore *.bak & *.bck (master) http://qi-hw.com/p/kicad-libs/b3dafeb | 08:24 |
qi-bot | [commit] kyak: nightsky: fix build (master) http://qi-hw.com/p/openwrt-packages/a3d14a9 | 09:00 |
qi-bot | [commit] Xiangfu: nanonote-files add more nanonote config files (master) http://qi-hw.com/p/openwrt-packages/1efced8 | 09:07 |
qi-bot | [commit] Xiangfu: nanonote optimize (master) http://qi-hw.com/p/openwrt-xburst/a808dfa | 09:12 |
qi-bot | [commit] Adam Wang: added libraries: nxp, diodes_inc; changed outlook same as datasheet as possible. (master) http://qi-hw.com/p/kicad-libs/3a983ff | 10:39 |
qi-bot | [commit] Werner Almesberger: genex/: generate expanded component view (WIP) (master) http://qi-hw.com/p/eda-tools/4902886 | 23:03 |
qi-bot | [commit] David Kühling: liballegro: cleanup and improve keyboard driver fix (master) http://qi-hw.com/p/openwrt-packages/115dfe5 | 23:11 |
qi-bot | [commit] David Kühling: liballegro: add png, jpeg image and ogg/vorbis audio file addons (master) http://qi-hw.com/p/openwrt-packages/088d3e7 | 23:11 |
qi-bot | [commit] David Kühling: liballegro: fix keyboard readout deadlock triggered in some of the examples (master) http://qi-hw.com/p/openwrt-packages/2ee0f6e | 00:30 |
---|---|---|
qi-bot | [commit] David Kühling: alpy: fix (workaround) segfault caused by openwrt dynamic linker pecularities (master) http://qi-hw.com/p/openwrt-packages/caaecfd | 00:30 |
qi-bot | [commit] Xiangfu: m1/patches/rtems: milkymist-audio-add-support-mic-boost.patch remove the mic boost ioctl (master) http://qi-hw.com/p/wernermisc/9aeb2f9 | 08:22 |
qi-bot | [commit] kyak: centerim: update to 4.22.10 and fix build (master) http://qi-hw.com/p/openwrt-packages/e244080 | 16:35 |
qi-bot | [commit] kyak: libphysfs: fix build (master) http://qi-hw.com/p/openwrt-packages/505ce6b | 19:05 |
qi-bot | [commit] Werner Almesberger: spool: support jobs with more than one file (master) http://qi-hw.com/p/cae-tools/c422be5 | 21:45 |
qi-bot | [commit] Werner Almesberger: cameo: new command "reverse" to reverse all paths (master) http://qi-hw.com/p/cae-tools/c59e393 | 21:45 |
qi-bot | [commit] Werner Almesberger: cameo/README: added warning that "area" still has bugs (master) http://qi-hw.com/p/cae-tools/479ae41 | 21:45 |
qi-bot | [commit] Werner Almesberger: bacon/case/: added smoothing pass for deburring; assorted other small changes (master) http://qi-hw.com/p/wernermisc/558e5da | 21:45 |
qi-bot | [commit] Werner Almesberger: bacon/case/draft.fig: draft of the overall case design (master) http://qi-hw.com/p/wernermisc/6442e08 | 21:45 |
qi-bot | [commit] Werner Almesberger: bacon/case/case.fpd: added the middle part (untested) (master) http://qi-hw.com/p/wernermisc/8454640 | 21:45 |
qi-bot | [commit] Werner Almesberger: bacon/case/case.fpd: added the bottom part (untested) (master) http://qi-hw.com/p/wernermisc/d00ccd8 | 21:45 |
qi-bot | [commit] Werner Almesberger: bacon/case/Makefile: generalized build process for all parts (master) http://qi-hw.com/p/wernermisc/fff8177 | 21:45 |
qi-bot | [commit] Werner Almesberger: bacon/case/case.fpd: rearranged model of middle part (master) http://qi-hw.com/p/wernermisc/24fdda0 | 21:45 |
qi-bot | [commit] Werner Almesberger: bacon/case/: corrections of bottom part; updates for machining (master) http://qi-hw.com/p/wernermisc/ddc5e0e | 21:45 |
qi-bot | [commit] Werner Almesberger: fakefile/: so far unsuccessful attempt at jailing Kicad (master) http://qi-hw.com/p/wernermisc/1506743 | 21:45 |
qi-bot | [commit] Werner Almesberger: Merge branch 'master' of projects.qi-hardware.com:wernermisc (master) http://qi-hw.com/p/wernermisc/5364134 | 21:45 |
qi-bot | [commit] David Kühling: brainless: fix braindead comment copy-pasted from some other ackage (master) http://qi-hw.com/p/openwrt-packages/6ca100f | 01:24 |
---|---|---|
qi-bot | [commit] David Kühling: new package: alpy: python bindings for allegro game library (master) http://qi-hw.com/p/openwrt-packages/b2d16d9 | 01:24 |
qi-bot | [commit] Adam Wang: changed AD1580BRTZ pin3 to Unspecified, added WM9707SCFT/V description with 48-lead TQFP, added few lib into .pro file (master) http://qi-hw.com/p/kicad-libs/c35e54d | 02:52 |
qi-bot | [commit] Xiangfu: m1/patches/rtems: milkymist-audio-add-support-mic-boost.patch preserve the mic boost setting (master) http://qi-hw.com/p/wernermisc/56adfde | 03:24 |
qi-bot | [commit] Adam Wang: added few libraries (master) http://qi-hw.com/p/kicad-libs/266c3b0 | 07:50 |
qi-bot | [commit] Xiangfu: nanonotefiles: config.full_system update: include bard, gtypist remove tangogps, nanoterm, gtkperf (master) http://qi-hw.com/p/openwrt-packages/c102d41 | 08:54 |
qi-bot | [commit] Xiangfu: octave: disable curl (master) http://qi-hw.com/p/openwrt-packages/9c9945c | 11:59 |
qi-bot | [commit] kyak: dega: fix build (master) http://qi-hw.com/p/openwrt-packages/4206f29 | 19:09 |
qi-bot | [commit] kyak: dgclock: fix build (master) http://qi-hw.com/p/openwrt-packages/e09fbf7 | 19:21 |
qi-bot | [commit] Xiangfu: nanonote-files: config.full_system use DirectFB as drawing-backend (master) http://qi-hw.com/p/openwrt-packages/37a4be2 | 06:58 |
---|---|---|
qi-bot | [commit] Xiangfu: package: ncurses: fix the libncursesw disappears when select some package thanks to kyak (release_2012-03-18) http://qi-hw.com/p/openwrt-xburst/657d4c7 | 07:23 |
qi-bot | [commit] Xiangfu: package: ncurses: fix the libncursesw disappears when select some package thanks to kyak (master) http://qi-hw.com/p/openwrt-xburst/c475dd5 | 07:24 |
qi-bot | [commit] Adam Wang: added few symbols (master) http://qi-hw.com/p/kicad-libs/c903a7a | 12:49 |
qi-bot | [commit] Xiangfu: cgminer: increase the MAX_DEVICE to 64 (master) http://qi-hw.com/p/openwrt-packages/b96e10c | 09:49 |
---|---|---|
qi-bot | [commit] Xiangfu: Merge branch 'master' of projects.qi-hardware.com:openwrt-packages (master) http://qi-hw.com/p/openwrt-packages/617627f | 09:49 |
qi-bot | [commit] Xiangfu: Merge branch 'master' of projects.qi-hardware.com:openwrt-packages (master) http://qi-hw.com/p/openwrt-packages/9a15361 | 09:49 |
qi-bot | [commit] Adam Wang: Added WM9707SCFT/V symbol (master) http://qi-hw.com/p/kicad-libs/b4543b9 | 10:04 |
qi-bot | [commit] Werner Almesberger: a bit of meta-data cleanup after the wm9707scft commit (master) http://qi-hw.com/p/kicad-libs/6faf611 | 10:49 |
qi-bot | [commit] David Kühling: plplot: fix compilation on latest openwrt toolchain (master) http://qi-hw.com/p/openwrt-packages/2fb5cdb | 00:30 |
---|---|---|
qi-bot | [commit] kyak: kbd: update upstream URL (master) http://qi-hw.com/p/openwrt-packages/4b456f3 | 11:00 |
qi-bot | [commit] kyak: qt4: change keyboard device in QWS_KEYBOARD (master) http://qi-hw.com/p/openwrt-packages/2a5afd9 | 17:17 |
qi-bot | [commit] Maarten ter Huurne: Merged LinkAction class into its base class. (master) http://qi-hw.com/p/gmenu2x/57ad81e | 10:54 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: Added missing #includes. (master) http://qi-hw.com/p/gmenu2x/d2413d8 | 10:54 |
qi-bot | [commit] David Kühling: octave: fix compilation with latest openwrt toolchain (master) http://qi-hw.com/p/openwrt-packages/51287e2 | 02:25 |
---|---|---|
qi-bot | [commit] Adam Wang: updated Sourcing status (master) http://qi-hw.com/p/wernermisc/cb05c7f | 10:37 |
qi-bot | [commit] Adam Wang: Merge branch 'master' of projects.qi-hardware.com:wernermisc (master) http://qi-hw.com/p/wernermisc/af07d13 | 10:37 |
qi-bot | [commit] David Kühling: Fix Aseprite and Alex4 compilation with newest version of OpenWrt (master) http://qi-hw.com/p/openwrt-packages/d478f19 | 01:47 |
---|---|---|
qi-bot | [commit] David Kühling: bard: fix compilation (various configure script fixes), still misses dejavu font (master) http://qi-hw.com/p/openwrt-packages/2c706db | 02:29 |
qi-bot | [commit] Xiangfu: add new folder for m1 Kicad (master) http://qi-hw.com/p/m1/5a5e335 | 08:55 |
qi-bot | [commit] Maarten ter Huurne: MIPS: A320: Tweak battery empty/full voltages. (jz-3.2) http://qi-hw.com/p/qi-kernel/675a9cd | 01:27 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: Merge branch 'jz-3.2' of projects.qi-hardware.com:qi-kernel into jz-3.2 (jz-3.2) http://qi-hw.com/p/qi-kernel/25e08f8 | 01:27 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: Squashed Paul's jz-3.2 changes to the SLCD driver. (jz-3.3) http://qi-hw.com/p/qi-kernel/4439381 | 01:27 |
qi-bot | [commit] Adam Wang: C259, C260, C267, C269 changed to Kemet T520 Tantalum Cap 150uF, 70.0 mOhm. (master) http://qi-hw.com/p/wernermisc/7913600 | 03:08 |
qi-bot | [commit] Adam Wang: Merge branch 'master' of projects.qi-hardware.com:wernermisc (master) http://qi-hw.com/p/wernermisc/16a547b | 03:08 |
qi-bot | [commit] Werner Almesberger: cameo/area.c (do_line): shorten segments to avoid duplicating outline cuts (master) http://qi-hw.com/p/cae-tools/19bc92a | 04:06 |
qi-bot | [commit] Werner Almesberger: cameo/area.c: move equation solving from "intersect", for future sharing (master) http://qi-hw.com/p/cae-tools/d79424d | 04:06 |
qi-bot | [commit] Werner Almesberger: cameo/area.c (hit_segment): clean up entry/exit handling (master) http://qi-hw.com/p/cae-tools/ebcdfd5 | 04:06 |
qi-bot | [commit] Werner Almesberger: cameo/area.c: move handling of left/right from hit_path to hit_segment (master) http://qi-hw.com/p/cae-tools/7a61482 | 04:06 |
qi-bot | [commit] Werner Almesberger: cameo: consider inside/outside also when checking corner points (master) http://qi-hw.com/p/cae-tools/340fb2c | 04:06 |
qi-bot | [commit] Werner Almesberger: cameo/zstack.pl: don't output lower layers at higher Z (master) http://qi-hw.com/p/cae-tools/079608b | 04:06 |
qi-bot | [commit] Werner Almesberger: cameo/path.c (path_offset): handle also degenerate polygons of only one point (master) http://qi-hw.com/p/cae-tools/6d70656 | 04:06 |
qi-bot | [commit] Werner Almesberger: cameo/fped2d2z.pl: outpout a dummy point at Z=0 (experimental) (master) http://qi-hw.com/p/cae-tools/3e7fca4 | 04:06 |
qi-bot | [commit] Werner Almesberger: bacon/case/cam.sh: increase overlap from 0.3 mm to 0.5 mm (master) http://qi-hw.com/p/wernermisc/6a4169a | 04:07 |
qi-bot | [commit] Werner Almesberger: Merge branch 'master' of projects.qi-hardware.com:wernermisc (master) http://qi-hw.com/p/wernermisc/ec7994c | 04:07 |
qi-bot | [commit] Werner Almesberger: bacon/case/case.fpd: tcp_pcb was redundant; adjusted height of top_ridge (master) http://qi-hw.com/p/wernermisc/1f0b9c9 | 04:07 |
qi-bot | [commit] Werner Almesberger: bacon/case/Makefile: added dependency on case.fpd (master) http://qi-hw.com/p/wernermisc/3203db6 | 04:07 |
qi-bot | [commit] Werner Almesberger: gp2rml: properly calculate pen down time (master) http://qi-hw.com/p/cae-tools/6c3bc3e | 04:16 |
qi-bot | [commit] Adam Wang: changed J24 to p/n: TSW-105-26-H-D-009, see: (master) http://qi-hw.com/p/wernermisc/458b90d | 02:07 |
---|---|---|
qi-bot | [commit] Adam Wang: C145 -> 1uF/0402, C234 -> 10uF/0805, R62 -> 0603 (master) http://qi-hw.com/p/wernermisc/d5f6e03 | 02:07 |
qi-bot | [commit] Adam Wang: Merge branch 'master' of projects.qi-hardware.com:wernermisc (master) http://qi-hw.com/p/wernermisc/e228723 | 02:07 |
qi-bot | [commit] Xiangfu: m1/patches/rtems/: Milkymist driver: add mic-boost support (master) http://qi-hw.com/p/wernermisc/901a483 | 09:21 |
qi-bot | [commit] Werner Almesberger: cameo: "area" now also adds the outline cuts (master) http://qi-hw.com/p/cae-tools/35c0624 | 00:07 |
---|---|---|
qi-bot | [commit] Werner Almesberger: cameo: don't duplicate paths already cleared by the outline (master) http://qi-hw.com/p/cae-tools/5a599e1 | 00:07 |
qi-bot | [commit] Werner Almesberger: cameo/area (hit_segment): only consider vectors pointing in the right direction (master) http://qi-hw.com/p/cae-tools/b607816 | 00:07 |
qi-bot | [commit] Werner Almesberger: cameo/area.c (touch): also consider whether we're looking for entry/exit (master) http://qi-hw.com/p/cae-tools/6fbdfd7 | 00:07 |
qi-bot | [commit] Werner Almesberger: cameo/area.c: removed debugging and obsolete code (master) http://qi-hw.com/p/cae-tools/6811df5 | 00:07 |
qi-bot | [commit] Werner Almesberger: cameo: documented "area"; miscellaneous cleanup (master) http://qi-hw.com/p/cae-tools/489ca9c | 00:07 |
qi-bot | [commit] Werner Almesberger: bacon/case/: top case part (almost machineable fped model) (master) http://qi-hw.com/p/wernermisc/b54f4a5 | 04:23 |
qi-bot | [commit] Werner Almesberger: cameo/zstack.pl: convert 2.5D paths into a stack with limited Z steps (master) http://qi-hw.com/p/cae-tools/085754f | 04:23 |
qi-bot | [commit] Werner Almesberger: cameo/fped2d2z.pl: convert fped 2D stacks into 2.5D paths with Z information (master) http://qi-hw.com/p/cae-tools/219e0a5 | 04:23 |
qi-bot | [commit] Werner Almesberger: cameo/zstack.pl: option -r to reverse the stack (master) http://qi-hw.com/p/cae-tools/5ecce7d | 04:23 |
qi-bot | [commit] Werner Almesberger: cameo: "area" now works on Z layers individually (untested) (master) http://qi-hw.com/p/cae-tools/18c9477 | 04:23 |
qi-bot | [commit] Werner Almesberger: cameo/area.c (subordinates): fix trimming of list of subordinates (master) http://qi-hw.com/p/cae-tools/fb117b2 | 04:23 |
qi-bot | [commit] Werner Almesberger: gp2rml: improved distance calculation; corrected compiler invocation (master) http://qi-hw.com/p/cae-tools/76b1b3e | 04:23 |
qi-bot | [commit] Xiangfu: cgminer: add /etc/init.d/cgminer for autostart (master) http://qi-hw.com/p/openwrt-packages/f5c5a97 | 08:00 |
qi-bot | [commit] Werner Almesberger: cameo/zstack.pl (usage): describe option -r (master) http://qi-hw.com/p/cae-tools/ce243b6 | 19:07 |
qi-bot | [commit] Werner Almesberger: cameo/fped2d2z.pl: added option -r, like in zstack.pl (master) http://qi-hw.com/p/cae-tools/9f5751a | 19:07 |
qi-bot | [commit] Werner Almesberger: cameo/fped2d2z.pl: added Z position substitution (master) http://qi-hw.com/p/cae-tools/4ea94e7 | 19:07 |
qi-bot | [commit] Werner Almesberger: bacon/case/: various bits and pieces for parametrization and correct positioning (master) http://qi-hw.com/p/wernermisc/3e39ae0 | 19:07 |
qi-bot | [commit] Werner Almesberger: postscript.c (ps_for_all_pkg): "pages" was never initialized (master) http://qi-hw.com/p/fped/5130707 | 02:18 |
---|---|---|
qi-bot | [commit] Werner Almesberger: purge unused measurement instances (master) http://qi-hw.com/p/fped/43928db | 02:18 |
qi-bot | [commit] Xiangfu: use kanoi repo. include the api changed (master) http://qi-hw.com/p/openwrt-packages/0a035ec | 06:51 |
qi-bot | [commit] Xiangfu: remove other u-boot include SDK and toolchain (master) http://qi-hw.com/p/openwrt-packages/0f72773 | 06:51 |
qi-bot | [commit] Xiangfu: nanonote-files: compile script file: collect all failed package in minial build (master) http://qi-hw.com/p/openwrt-packages/97b9b84 | 06:51 |
qi-bot | [commit] Xiangfu: nanonote: config.full_system, update uboot-envtools add CONFIG_PACKAGE_uboot-envtools_setenv_symlink (master) http://qi-hw.com/p/openwrt-packages/797ea0f | 07:39 |
qi-bot | [commit] Werner Almesberger: cameo: an attempt at area fill (WIP) (master) http://qi-hw.com/p/cae-tools/2530a11 | 16:19 |
qi-bot | [commit] Werner Almesberger: cameo/test/: test scenario for area fill (master) http://qi-hw.com/p/cae-tools/8c4dfc5 | 16:19 |
qi-bot | [commit] Werner Almesberger: b2: BOOM rewrite (WIP) (master) http://qi-hw.com/p/eda-tools/aa2fe3e | 16:24 |
qi-bot | [commit] Xiangfu: fix the rtc bug (master) http://qi-hw.com/p/openwrt-xburst/5a49fe2 | 10:00 |
---|---|---|
qi-bot | [commit] Xiangfu: fix the rtc bug (release_2011-11-13) http://qi-hw.com/p/openwrt-xburst/a89fb23 | 10:05 |
qi-bot | [commit] Xiangfu: rtc: jz4740 fix hwclock give time out (xiangfu/openwrt/v3.0.0) http://qi-hw.com/p/qi-kernel/9c46e24 | 10:06 |
qi-bot | [commit] Adam Wang: updated C120, C126, U3 (master) http://qi-hw.com/p/wernermisc/29ef49c | 07:23 |
---|---|---|
qi-bot | [commit] Adam Wang: removed embedded newlines in *.csv (master) http://qi-hw.com/p/wernermisc/cd6b64d | 12:33 |
qi-bot | [commit] Werner Almesberger: xbrd/top.fpd: changed header to 10*100 mil and reduced CR by 3 mm (master) http://qi-hw.com/p/wernermisc/6f4a6cb | 23:51 |
qi-bot | [commit] Werner Almesberger: Merge branch 'master' of projects.qi-hardware.com:wernermisc (master) http://qi-hw.com/p/wernermisc/92a6b6b | 23:51 |
qi-bot | [commit] Werner Almesberger: Merge branch 'master' of projects.qi-hardware.com:wernermisc (master) http://qi-hw.com/p/wernermisc/f08e6f8 | 23:51 |
qi-bot | [commit] Werner Almesberger: m1r4/dsv: EXTRA bookshelf file for additional data sheets and such (master) http://qi-hw.com/p/wernermisc/ae7b6e1 | 23:51 |
qi-bot | [commit] Xiangfu: nanonote-files: compile-openwrt-xburst.sh: ignore build when there is no new commit (master) http://qi-hw.com/p/openwrt-packages/669f921 | 01:38 |
---|---|---|
qi-bot | [commit] Xiangfu: 4th tig byobu calcurse gawk remind taskwarrior: merged in upstream (master) http://qi-hw.com/p/openwrt-packages/15c8841 | 01:38 |
qi-bot | [commit] Xiangfu: stardict: disable the dictionary depends on stardict (master) http://qi-hw.com/p/openwrt-packages/9c746f0 | 07:29 |
qi-bot | [commit] Xiangfu: xburst: nanonote: fix atusb compile error (master) http://qi-hw.com/p/openwrt-xburst/a4f9460 | 08:53 |
qi-bot | [commit] Xiangfu: cgminer: add include miner.php for web access cgminer (master) http://qi-hw.com/p/openwrt-packages/b9fad49 | 09:04 |
qi-bot | [commit] Xiangfu: kbd: update to 1.15.3 (master) http://qi-hw.com/p/openwrt-packages/321ebf2 | 10:11 |
qi-bot | [commit] Xiangfu: xburst: nanonote: fix update config-3.2 on sound driver (master) http://qi-hw.com/p/openwrt-xburst/1723a7c | 09:00 |
---|---|---|
qi-bot | [commit] Xiangfu: nanonote-files: config.minimal: add CONFIG_ALL for build script file (master) http://qi-hw.com/p/openwrt-packages/b1bf002 | 11:13 |
qi-bot | [commit] Xiangfu: nanonote-files: config.full_system add kmod-lib-crc-ccitt (master) http://qi-hw.com/p/openwrt-packages/9cee283 | 11:45 |
qi-bot | [commit] Xiangfu: milkyist-files: add uci config files for 703n (master) http://qi-hw.com/p/openwrt-packages/0c2686e | 02:45 |
---|
qi-bot | [commit] Xiangfu: gtypist: ignore line too long (master) http://qi-hw.com/p/openwrt-packages/d52629c | 02:37 |
---|---|---|
qi-bot | [commit] Werner Almesberger: spool/: job spooler for CNC mill (migrated from Openmoko) (master) http://qi-hw.com/p/cae-tools/6271d5f | 12:46 |
qi-bot | [commit] Jiri Brozovsky: The classic Dope Wars game. It needs to use the ash(default) terminal to fit (master) http://qi-hw.com/p/openwrt-packages/61ec128 | 19:47 |
qi-bot | [commit] Xiangfu: compile-openwrt-xburst.sh: fix English grammar error (master) http://qi-hw.com/p/openwrt-packages/8eefa4b | 06:51 |
---|---|---|
qi-bot | [commit] Xiangfu: flite: update to 1.5.5 (master) http://qi-hw.com/p/openwrt-packages/1a751fb | 08:36 |
qi-bot | [commit] Xiangfu: bard: udpate to 0.7 (master) http://qi-hw.com/p/openwrt-packages/20b0b77 | 08:36 |
qi-bot | [commit] Werner Almesberger: m1r4/dsv/: updated for Adam's "official" BOM (master) http://qi-hw.com/p/wernermisc/b2954b6 | 19:49 |
qi-bot | [commit] Werner Almesberger: m1r4/dsv/milkymist_one_bom_r4.csv: removed duplicate C19 and C21 (master) http://qi-hw.com/p/wernermisc/75509e5 | 19:49 |
qi-bot | [commit] Werner Almesberger: Merge branch 'master' of projects.qi-hardware.com:wernermisc (master) http://qi-hw.com/p/wernermisc/81078fc | 19:49 |
qi-bot | [commit] Xiangfu Liu: nanonote wav2png: draw lines instead points thanks jirka (master) http://qi-hw.com/p/openwrt-packages/b609209 | 02:10 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: xburst nanonote: fix wpan compile failed under v3.2.1 (master) http://qi-hw.com/p/openwrt-xburst/63176f2 | 03:39 |
qi-bot | [commit] Xiangfu Liu: ks7010: fix compile failed under linux v3.2.1 (master) http://qi-hw.com/p/openwrt-packages/b813482 | 04:03 |
qi-bot | [commit] Paul Cercueil: MIPS: JZ4740: Drop support for LG LGDP4551 and SPFD5420A Smart LCD panels. (jz-3.2) http://qi-hw.com/p/qi-kernel/d42e289 | 19:01 |
qi-bot | [commit] Paul Cercueil: MIPS: JZ4740: code re-ordering. (jz-3.2) http://qi-hw.com/p/qi-kernel/c0b8b4d | 19:01 |
qi-bot | [commit] Paul Cercueil: MIPS: JZ4740: use standard module_param() macro for the 'panel' parameter. (jz-3.2) http://qi-hw.com/p/qi-kernel/1a7fb60 | 19:01 |
qi-bot | [commit] Paul Cercueil: MIPS: JZ4740: add 'rgb' parameter for ILI9338. (jz-3.2) http://qi-hw.com/p/qi-kernel/1ee6312 | 19:01 |
qi-bot | [commit] Paul Cercueil: MIPS: JZ4740: add the 'panel' attribute to /sys (jz-3.2) http://qi-hw.com/p/qi-kernel/ae56dee | 19:01 |
qi-bot | [commit] Paul Cercueil: MIPS: JZ4740: add the 'rgb' attribute to /sys. (jz-3.2) http://qi-hw.com/p/qi-kernel/38763ad | 19:01 |
qi-bot | [commit] Werner Almesberger: m1r4/dsv/bomshelf: use less alarmist message when overriding a component (master) http://qi-hw.com/p/wernermisc/04721da | 01:06 |
---|---|---|
qi-bot | [commit] Werner Almesberger: m1r4/dsv/SUPPLEMENT: various r4 replacements and new components (master) http://qi-hw.com/p/wernermisc/54dc72d | 01:06 |
qi-bot | [commit] Xiangfu Liu: compile-openwrt-xburst.sh: don't copy failed build to IMAGES_URL (master) http://qi-hw.com/p/openwrt-packages/26a488a | 02:09 |
qi-bot | [commit] Xiangfu Liu: compile-openwrt-xburst.sh: only zip the files when successful (master) http://qi-hw.com/p/openwrt-packages/c71889d | 02:17 |
qi-bot | [commit] Xiangfu: m1/patches/rtems: fix-pmem-size applied at 2012-03-06 (master) http://qi-hw.com/p/wernermisc/98b02f2 | 05:41 |
qi-bot | [commit] kyak: trunk: add ks7010 support patch (master) http://qi-hw.com/p/openwrt-xburst/5cfd8a7 | 13:53 |
qi-bot | [commit] Xiangfu Liu: base-files, move it to openwrt-package/nanonote-files (master) http://qi-hw.com/p/openwrt-xburst/6a557e0 | 13:53 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: update to 2010.06 (master) http://qi-hw.com/p/openwrt-xburst/ddc990f | 13:53 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: enable-silent-console.patch (master) http://qi-hw.com/p/openwrt-xburst/b04298a | 13:53 |
qi-bot | [commit] Xiangfu Liu: uboot silent console (master) http://qi-hw.com/p/openwrt-xburst/ca4d2cb | 13:53 |
qi-bot | [commit] Xiangfu Liu: ben nanonote: forward patches to linux-3.0 (master) http://qi-hw.com/p/openwrt-xburst/fd6b4ce | 13:53 |
qi-bot | [commit] kyak: kernel-3.0: add fbcon color fonts patch (master) http://qi-hw.com/p/openwrt-xburst/56ecc9b | 13:53 |
qi-bot | [commit] Xiangfu Liu: nanonote: base-files: add hostname (master) http://qi-hw.com/p/openwrt-xburst/d330cd2 | 13:53 |
qi-bot | [commit] Xiangfu Liu: xburst: update config-3.0 (master) http://qi-hw.com/p/openwrt-xburst/3bdb480 | 13:53 |
qi-bot | [commit] Xiangfu Liu: xburst: ben nanonote: first add WPAN(atben,atusb) driver (master) http://qi-hw.com/p/openwrt-xburst/dc637c9 | 13:53 |
qi-bot | [commit] Xiangfu Liu: add WPAN(atben,atusb) kernel module file (master) http://qi-hw.com/p/openwrt-xburst/f2ec0f1 | 13:53 |
qi-bot | [commit] Xiangfu Liu: WPAN: disable AutoLoad on at86rf230, spi_atben. (master) http://qi-hw.com/p/openwrt-xburst/a7b1c79 | 13:53 |
qi-bot | [commit] Xiangfu Liu: xburst qi_lb60 disable WPAN kernel options (master) http://qi-hw.com/p/openwrt-xburst/77d2842 | 13:53 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: change load kernel size (master) http://qi-hw.com/p/openwrt-xburst/d53cef1 | 13:53 |
qi-bot | [commit] Xiangfu Liu: nanonote: add nanonote slash screen (master) http://qi-hw.com/p/openwrt-xburst/9a8198f | 13:53 |
qi-bot | [commit] Xiangfu Liu: nanonote: select the nanonote slash screen (master) http://qi-hw.com/p/openwrt-xburst/ed618f2 | 13:53 |
qi-bot | [commit] Xiangfu Liu: this commit break the ks7010 driver. (master) http://qi-hw.com/p/openwrt-xburst/abf0eb0 | 13:53 |
qi-bot | [commit] Xiangfu Liu: wpan.mk: fix typo thanks blogic and jivs (master) http://qi-hw.com/p/openwrt-xburst/15eef95 | 13:53 |
qi-bot | [commit] Xiangfu Liu: nanonote base file: change the openDNS to Google public DNS (master) http://qi-hw.com/p/openwrt-xburst/555da26 | 13:53 |
qi-bot | [commit] Xiangfu Liu: update xburst qi_lb60 to linux-v3.2.1 (master) http://qi-hw.com/p/openwrt-xburst/2361a3f | 13:53 |
qi-bot | [commit] Xiangfu Liu: compile-openwrt-xburst.sh code style cleanup (master) http://qi-hw.com/p/openwrt-packages/4e7ae65 | 13:54 |
qi-bot | [commit] kyak: trunk: add ks7010 support patch (master) http://qi-hw.com/p/openwrt-xburst/ed45158 | 15:00 |
qi-bot | [commit] Xiangfu Liu: base-files, move it to openwrt-package/nanonote-files (master) http://qi-hw.com/p/openwrt-xburst/610823a | 15:00 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: update to 2010.06 (master) http://qi-hw.com/p/openwrt-xburst/65057cd | 15:00 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: enable-silent-console.patch (master) http://qi-hw.com/p/openwrt-xburst/ae29c39 | 15:00 |
qi-bot | [commit] Xiangfu Liu: uboot silent console (master) http://qi-hw.com/p/openwrt-xburst/8eccd43 | 15:00 |
qi-bot | [commit] Xiangfu Liu: ben nanonote: forward patches to linux-3.0 (master) http://qi-hw.com/p/openwrt-xburst/1c406da | 15:00 |
qi-bot | [commit] kyak: kernel-3.0: add fbcon color fonts patch (master) http://qi-hw.com/p/openwrt-xburst/5d26452 | 15:00 |
qi-bot | [commit] Xiangfu Liu: nanonote: base-files: add hostname (master) http://qi-hw.com/p/openwrt-xburst/72e744f | 15:00 |
qi-bot | [commit] Xiangfu Liu: xburst: update config-3.0 (master) http://qi-hw.com/p/openwrt-xburst/5d17b9a | 15:00 |
qi-bot | [commit] Xiangfu Liu: xburst: ben nanonote: first add WPAN(atben,atusb) driver (master) http://qi-hw.com/p/openwrt-xburst/9a1322f | 15:00 |
qi-bot | [commit] Xiangfu Liu: add WPAN(atben,atusb) kernel module file (master) http://qi-hw.com/p/openwrt-xburst/425f09d | 15:00 |
qi-bot | [commit] Xiangfu Liu: WPAN: disable AutoLoad on at86rf230, spi_atben. (master) http://qi-hw.com/p/openwrt-xburst/b47bece | 15:00 |
qi-bot | [commit] Xiangfu Liu: xburst qi_lb60 disable WPAN kernel options (master) http://qi-hw.com/p/openwrt-xburst/f0ca970 | 15:00 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: change load kernel size (master) http://qi-hw.com/p/openwrt-xburst/627ee5c | 15:00 |
qi-bot | [commit] Xiangfu Liu: nanonote: add nanonote slash screen (master) http://qi-hw.com/p/openwrt-xburst/e1ec182 | 15:00 |
qi-bot | [commit] Xiangfu Liu: nanonote: select the nanonote slash screen (master) http://qi-hw.com/p/openwrt-xburst/90f7279 | 15:00 |
qi-bot | [commit] Xiangfu Liu: this commit break the ks7010 driver. (master) http://qi-hw.com/p/openwrt-xburst/8fa1337 | 15:00 |
qi-bot | [commit] Xiangfu Liu: wpan.mk: fix typo thanks blogic and jivs (master) http://qi-hw.com/p/openwrt-xburst/484be41 | 15:00 |
qi-bot | [commit] Xiangfu Liu: nanonote base file: change the openDNS to Google public DNS (master) http://qi-hw.com/p/openwrt-xburst/76c9a5d | 15:00 |
qi-bot | [commit] Xiangfu Liu: update xburst qi_lb60 to linux-v3.2.1 (master) http://qi-hw.com/p/openwrt-xburst/c2528ed | 15:00 |
qi-bot | [commit] Xiangfu Liu: update xburst qi_lb60 to linux-v3.2.1 (master) http://qi-hw.com/p/openwrt-xburst/7f79566 | 08:35 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: nanonote-files: add wav2png simple script file (master) http://qi-hw.com/p/openwrt-packages/f0ff76c | 10:29 |
qi-bot | [commit] Xiangfu: m1/patches/rtems/: sync with rtems(2012-03-04) (master) http://qi-hw.com/p/wernermisc/4dfb61f | 11:33 |
qi-bot | [commit] Werner Almesberger: m1r4/dsv/: M1rc3 BOM to BOOKSHELF conversion (may be incomplete) (master) http://qi-hw.com/p/wernermisc/b791fd7 | 19:04 |
qi-bot | [commit] Werner Almesberger: Merge branch 'master' of projects.qi-hardware.com:wernermisc (master) http://qi-hw.com/p/wernermisc/a9c9be0 | 19:04 |
qi-bot | [commit] Werner Almesberger: m1r4/dsv/: added milkymist_one_bom_rc3.csv generated from Adam's original (master) http://qi-hw.com/p/wernermisc/19e2f84 | 19:30 |
qi-bot | [commit] Werner Almesberger: m1r4/dsv/bomshelf: support adding components to the BOM (master) http://qi-hw.com/p/wernermisc/dd3c0c2 | 21:44 |
qi-bot | [commit] Werner Almesberger: m1r4/dsv/SUPPLEMENT: some improvements for the audio sheet (master) http://qi-hw.com/p/wernermisc/af4482d | 21:44 |
qi-bot | [commit] Werner Almesberger: m1r4/dsv/SUPPLEMENT: fix various broken or redirected PDF links (master) http://qi-hw.com/p/wernermisc/4bcaa5f | 21:44 |
qi-bot | [commit] Werner Almesberger: m1r1/dsc/bomshelf: new tag X to delete a part number (and all references) (master) http://qi-hw.com/p/wernermisc/0750ed8 | 21:44 |
qi-bot | [commit] Werner Almesberger: m1r1/dsv/SUPPLEMENT: delete mechanical components; fixed last non-Yageo bad link (master) http://qi-hw.com/p/wernermisc/d3a27c7 | 21:44 |
qi-bot | [commit] Werner Almesberger: m1r1/dsv/SUPPLEMENT: varistors are called Vxxx, not VRxxx (master) http://qi-hw.com/p/wernermisc/7c67713 | 22:27 |
qi-bot | [commit] Xiangfu Liu: cgminer: most patches merged to upstream (master) http://qi-hw.com/p/openwrt-packages/9feb482 | 02:19 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: icarus-miner: remove outdata package (master) http://qi-hw.com/p/openwrt-packages/4c47465 | 05:42 |
qi-bot | [commit] Werner Almesberger: m1/patches/rtems/: fix SOFTUSB_PMEM_SIZE (master) http://qi-hw.com/p/wernermisc/f829d13 | 00:01 |
---|---|---|
qi-bot | [commit] Werner Almesberger: m1/BUILD-CHEAT-SHEET: updated RTEMS version and added synthesis hints (master) http://qi-hw.com/p/wernermisc/df09557 | 00:01 |
qi-bot | [commit] Xiangfu: PR2028: Milkymist USB: forward MIDI messages. fixed 2012-02-29 (master) http://qi-hw.com/p/wernermisc/9fda799 | 08:30 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ircstats/ML: updated to include Feb 2012 traffic (master) http://qi-hw.com/p/wernermisc/4567868 | 13:33 |
qi-bot | [commit] Werner Almesberger: Merge branch 'master' of projects.qi-hardware.com:wernermisc (master) http://qi-hw.com/p/wernermisc/e99d4af | 13:33 |
qi-bot | [commit] Xiangfu Liu: cgminer: disable bitfore, it hang cgminer when it detect bitforce on icarus (master) http://qi-hw.com/p/openwrt-packages/99d94cc | 03:35 |
---|---|---|
qi-bot | [commit] Werner Almesberger: M1 build process update: USB firmware loading (master) http://qi-hw.com/p/wernermisc/dde052c | 15:44 |
qi-bot | [commit] Xiangfu Liu: cgminer: support icarus by upstream, fix the multi-icarus support (master) http://qi-hw.com/p/openwrt-packages/01bb56a | 17:02 |
---|---|---|
qi-bot | [commit] Werner Almesberger: M1 build process update (master) http://qi-hw.com/p/wernermisc/fe7a334 | 23:37 |
qi-bot | [commit] Xiangfu: m1 patches: add fix-vga-vsync-pulses.patch (master) http://qi-hw.com/p/wernermisc/91da747 | 09:34 |
---|
qi-bot | [commit] Xiangfu Liu: fix typo (master) http://qi-hw.com/p/openwrt-packages/467b78e | 04:04 |
---|
qi-bot | [commit] Jiva Nath Bagale: guile 2 Makefile, libunistring updated (master) http://qi-hw.com/p/openwrt-packages/7addc31 | 14:10 |
---|
qi-bot | [commit] Xiangfu Liu: add a Makefile.firmware for only compile firmware (master) http://qi-hw.com/p/xburst-tools/fc85c03 | 08:36 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: cgminer: now cgminer+icarus is 10% better then origin miner.py (master) http://qi-hw.com/p/openwrt-packages/c38f277 | 09:24 |
qi-bot | [commit] Xiangfu Liu: cgminer: disable auto detect since Icarus use default PL2303 configuration (master) http://qi-hw.com/p/openwrt-packages/d3ed780 | 03:34 |
---|---|---|
qi-bot | [commit] Werner Almesberger: m1nor: search fjmem.bit also in /usr{/local,}/share/milkymist/fjmem.bit (master) http://qi-hw.com/p/wernermisc/b05481f | 17:27 |
qi-bot | [commit] Xiangfu Liu: cgminer: add Icarus support (master) http://qi-hw.com/p/openwrt-packages/622aa44 | 11:32 |
---|---|---|
qi-bot | [commit] Werner Almesberger: m1/patches/rtems/series: update and bring back milkymist-midi-opt.patch (master) http://qi-hw.com/p/wernermisc/60601c9 | 13:45 |
qi-bot | [commit] Werner Almesberger: midi2osc: fix translation of Note On and Pitch; add debug output (master) http://qi-hw.com/p/wernermisc/58d192b | 00:04 |
---|---|---|
qi-bot | [commit] Werner Almesberger: midi2osc: added processing of program change events (master) http://qi-hw.com/p/wernermisc/45a0c17 | 00:04 |
qi-bot | [commit] Werner Almesberger: m1/perf: deleted. all this has long moved into flickernoise/src/compiler/ptest (master) http://qi-hw.com/p/wernermisc/2d4a886 | 00:04 |
qi-bot | [commit] Werner Almesberger: midi2osc: when reporting an unrecognized MIDI event, print its number (master) http://qi-hw.com/p/wernermisc/8e81abd | 00:26 |
qi-bot | [commit] Xiangfu Liu: icarus-miner: record time on u.log and export to webserver ROUTER_IP/u.log (master) http://qi-hw.com/p/openwrt-packages/ed8a0b7 | 03:27 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: cgminer: make it compile. only enable the bitforce FPGA support (master) http://qi-hw.com/p/openwrt-packages/f65d64c | 03:27 |
qi-bot | [commit] Xiangfu Liu: cgminer: add libpthread libncurses jansson to DEPENDS (master) http://qi-hw.com/p/openwrt-packages/83c6a66 | 03:27 |
qi-bot | [commit] Xiangfu Liu: cgminer: enable-cpumining for play (master) http://qi-hw.com/p/openwrt-packages/e114a4e | 03:40 |
qi-bot | [commit] Xiangfu Liu: bard: whitespace cleanup (master) http://qi-hw.com/p/openwrt-packages/cc8b88b | 03:25 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: new pakcage: icarus python miner software (master) http://qi-hw.com/p/openwrt-packages/f8417fd | 03:25 |
qi-bot | [commit] Xiangfu Liu: icarus-miner: restart the cron (master) http://qi-hw.com/p/openwrt-packages/5b4b308 | 03:34 |
qi-bot | [commit] Xiangfu Liu: icarus-miner: add " around WORKDER (master) http://qi-hw.com/p/openwrt-packages/3a9287c | 13:35 |
qi-bot | [commit] Xiangfu Liu: TODO: burgerspace and newsbeuter, add a simple Makefile mark as @BROKEN (master) http://qi-hw.com/p/openwrt-packages/d78f7f3 | 09:01 |
---|
qi-bot | [commit] Werner Almesberger: ircstat/ML: updated for January 2012 (master) http://qi-hw.com/p/wernermisc/0032283 | 19:11 |
---|
qi-bot | [commit] Xiangfu Liu: pick-pdf script file. thanks jiri.brozovsky (master) http://qi-hw.com/p/openwrt-packages/168c076 | 02:35 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: pick-pdf add Version, add -type f to find, exit when no pdf file found (master) http://qi-hw.com/p/openwrt-packages/441bd7e | 02:35 |
qi-bot | [commit] Xiangfu: nanonote: add bard icon (master) http://qi-hw.com/p/gmenu2x/63f7e54 | 02:37 |
qi-bot | [commit] Xiangfu: nanonote: add pickpdf icon (master) http://qi-hw.com/p/gmenu2x/78b6070 | 02:37 |
qi-bot | [commit] Paul Cercueil: Reinitialize the powersaver timer when a suspend has been detected. (master) http://qi-hw.com/p/gmenu2x/2d81b13 | 22:37 |
qi-bot | [commit] Werner Almesberger: ledm.sch: changed "J22" to J21 (found by Adam Wang) (master) http://qi-hw.com/p/wernermisc/78bcb82 | 03:01 |
---|
qi-bot | [commit] Xiangfu Liu: bard: update to 0.6 and disable mouse (master) http://qi-hw.com/p/openwrt-packages/927c833 | 02:38 |
---|---|---|
qi-bot | [commit] kyak: trunk: fix kernel keymap for VolUp/Down and Del (master) http://qi-hw.com/p/openwrt-xburst/65c48a3 | 03:27 |
qi-bot | [commit] kyak: trunk: build sound modules in kernel (master) http://qi-hw.com/p/openwrt-xburst/6ff2086 | 03:27 |
qi-bot | [commit] kyak: trunk: add ks7010 support patch (master) http://qi-hw.com/p/openwrt-xburst/7ac9c08 | 03:27 |
qi-bot | [commit] Xiangfu Liu: base-files, move it to openwrt-package/nanonote-files (master) http://qi-hw.com/p/openwrt-xburst/9966026 | 03:27 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: update to 2010.06 (master) http://qi-hw.com/p/openwrt-xburst/a5cc97a | 03:27 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: enable-silent-console.patch (master) http://qi-hw.com/p/openwrt-xburst/d253061 | 03:27 |
qi-bot | [commit] Xiangfu Liu: uboot silent console (master) http://qi-hw.com/p/openwrt-xburst/975b14c | 03:27 |
qi-bot | [commit] Xiangfu Liu: ben nanonote: forward patches to linux-3.0 (master) http://qi-hw.com/p/openwrt-xburst/7587a4c | 03:27 |
qi-bot | [commit] kyak: kernel-3.0: add fbcon color fonts patch (master) http://qi-hw.com/p/openwrt-xburst/92612cc | 03:27 |
qi-bot | [commit] Xiangfu Liu: nanonote: base-files: add hostname (master) http://qi-hw.com/p/openwrt-xburst/6dda079 | 03:27 |
qi-bot | [commit] Xiangfu Liu: xburst: update config-3.0 (master) http://qi-hw.com/p/openwrt-xburst/a711061 | 03:27 |
qi-bot | [commit] Xiangfu Liu: xburst: ben nanonote: first add WPAN(atben,atusb) driver (master) http://qi-hw.com/p/openwrt-xburst/79165fa | 03:27 |
qi-bot | [commit] Xiangfu Liu: add WPAN(atben,atusb) kernel module file (master) http://qi-hw.com/p/openwrt-xburst/73257ed | 03:27 |
qi-bot | [commit] Xiangfu Liu: WPAN: disable AutoLoad on at86rf230, spi_atben. (master) http://qi-hw.com/p/openwrt-xburst/48dad2d | 03:27 |
qi-bot | [commit] Xiangfu Liu: xburst qi_lb60 disable WPAN kernel options (master) http://qi-hw.com/p/openwrt-xburst/86e88f6 | 03:27 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: change load kernel size (master) http://qi-hw.com/p/openwrt-xburst/cf9505c | 03:27 |
qi-bot | [commit] Xiangfu Liu: nanonote: add nanonote slash screen (master) http://qi-hw.com/p/openwrt-xburst/1e15cd6 | 03:27 |
qi-bot | [commit] Xiangfu Liu: nanonote: select the nanonote slash screen (master) http://qi-hw.com/p/openwrt-xburst/38a6a64 | 03:27 |
qi-bot | [commit] Xiangfu Liu: this commit break the ks7010 driver. (master) http://qi-hw.com/p/openwrt-xburst/94abc04 | 03:27 |
qi-bot | [commit] Xiangfu Liu: wpan.mk: fix typo thanks blogic and jivs (master) http://qi-hw.com/p/openwrt-xburst/810de25 | 03:27 |
qi-bot | [commit] Xiangfu Liu: nanonote-files: update the new daily build URL (master) http://qi-hw.com/p/openwrt-packages/ca217cc | 06:12 |
qi-bot | [commit] Xiangfu Liu: nanonote base file: change the openDNS to Google public DNS (master) http://qi-hw.com/p/openwrt-xburst/6f7d1fd | 09:57 |
qi-bot | [commit] Lars-Peter Clausen: ASoC: jz4740-pcm: Fix snd_pcm_hw_constraint_integer error check (jz-3.2) http://qi-hw.com/p/qi-kernel/db41fa0 | 19:31 |
---|
qi-bot | [commit] Maarten ter Huurne: MIPS: A320: Fine-tune PWM backlight settings. (jz-3.2) http://qi-hw.com/p/qi-kernel/0bc374e | 11:38 |
---|---|---|
qi-bot | [commit] Paul Cercueil: MIPS: JZ4740: enable the OpenDingux logo only when targetting the Dingoo. (jz-3.2) http://qi-hw.com/p/qi-kernel/2688101 | 11:45 |
qi-bot | [commit] Paul Cercueil: MIPS: A320: Updated defconfig to match Kconfig changes. (jz-3.2) http://qi-hw.com/p/qi-kernel/9c420ed | 11:45 |
qi-bot | [commit] Paul Cercueil: MIPS: A320: defconfig: Tweak scheduling options to get better performance. (jz-3.2) http://qi-hw.com/p/qi-kernel/d9e5b2b | 11:45 |
qi-bot | [commit] Paul Cercueil: OpenDingux: initrd: added 'splashkill' program. (jz-3.2) http://qi-hw.com/p/qi-kernel/c9b9fe0 | 12:07 |
qi-bot | [commit] Xiangfu Liu: update nanonote daily build folder name and url (master) http://qi-hw.com/p/openwrt-packages/c36a307 | 11:49 |
---|---|---|
qi-bot | [commit] Werner Almesberger: web/Makefile: also upload zoom.html (reported by Peter Zotov) (master) http://qi-hw.com/p/ben-wpan/a642bfa | 17:14 |
qi-bot | [commit] Werner Almesberger: Merge branch 'master' of projects.qi-hardware.com:ben-wpan (master) http://qi-hw.com/p/ben-wpan/762d33c | 17:14 |
qi-bot | [commit] Werner Almesberger: m1/patches/rtems/mem-fixes.patch: fix mdump and medit shell commands (master) http://qi-hw.com/p/wernermisc/19462f4 | 01:06 |
---|---|---|
qi-bot | [commit] Werner Almesberger: m1/ledravaganza/ramp.pl: exponential ramp generator for ledm (master) http://qi-hw.com/p/wernermisc/94e9558 | 15:05 |
qi-bot | [commit] Werner Almesberger: m1/BUILD-CHEAT-SHEET: use 2011/12/01 version for now (master) http://qi-hw.com/p/wernermisc/65555f7 | 21:55 |
qi-bot | [commit] Wolfgang Spraul: upleveled to bzr3378 (master) http://qi-hw.com/p/eda-tools/e192246 | 11:32 |
---|---|---|
qi-bot | [commit] Wolfgang Spraul: again, this time with correct diff (master) http://qi-hw.com/p/eda-tools/626e111 | 12:20 |
qi-bot | [commit] Werner Almesberger: kicad-patches/README: updated for bzr 3378 (master) http://qi-hw.com/p/eda-tools/b8ab60a | 12:40 |
qi-bot | [commit] Werner Almesberger: m1/ledravaganza/placement.fig: illustrate LED placement (master) http://qi-hw.com/p/wernermisc/a44233e | 09:18 |
---|---|---|
qi-bot | [commit] Werner Almesberger: m1/ledravaganza/shine-through.fig: trim PCB layers for extra LED visibility (master) http://qi-hw.com/p/wernermisc/b13b4e8 | 22:59 |
qi-bot | [commit] Paul Cercueil: Fix the filename for the user-specified input conf file. (master) http://qi-hw.com/p/gmenu2x/a0b9fc0 | 11:31 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: flter: install head files (master) http://qi-hw.com/p/openwrt-packages/836e6d0 | 14:39 |
qi-bot | [commit] Xiangfu Liu: bard: fix the FLITEDIR and SDL check (master) http://qi-hw.com/p/openwrt-packages/5c470de | 14:39 |
qi-bot | [commit] Xiangfu Liu: bard: using PKG_FIXUP. not redefine Configure (master) http://qi-hw.com/p/openwrt-packages/0b14c86 | 14:45 |
qi-bot | [commit] Xiangfu Liu: flite: only compile the cmu_us_kal voice. thanks Alan (master) http://qi-hw.com/p/openwrt-packages/1a3fe4d | 16:10 |
qi-bot | [commit] Xiangfu Liu: flite: update to Alan W Black's 1.5.4-current (master) http://qi-hw.com/p/openwrt-packages/1b1a9b4 | 16:36 |
qi-bot | [commit] Xiangfu Liu: flite: install .a files under InstallDev (master) http://qi-hw.com/p/openwrt-packages/34d6d10 | 17:06 |
qi-bot | [commit] Xiangfu Liu: bard: mkae DejaVuSans as default font. (after update flite) it works fine now (master) http://qi-hw.com/p/openwrt-packages/4829183 | 17:06 |
qi-bot | [commit] Xiangfu Liu: new package: bard: a text reader (master) http://qi-hw.com/p/openwrt-packages/f6e42fc | 07:19 |
---|---|---|
qi-bot | [commit] Bas Wijnen: update things to work with new compiler and sdram chip (master) http://qi-hw.com/p/iris/538b9b9 | 17:34 |
qi-bot | [commit] Werner Almesberger: midi2osc: correct usage - the host name follows the mappings (master) http://qi-hw.com/p/wernermisc/c4ca7de | 19:22 |
qi-bot | [commit] Paul Cercueil: Revert "MIPS: JZ4740: Add Dingux logo." (jz-3.2) http://qi-hw.com/p/qi-kernel/fc52b43 | 19:59 |
qi-bot | [commit] Paul Cercueil: MIPS: JZ4740: Add OpenDingux logo. (jz-3.2) http://qi-hw.com/p/qi-kernel/0254d3f | 19:59 |
qi-bot | [commit] Paul Cercueil: MIPS: JZ4740: SLCD: show linux logo at init. (jz-3.2) http://qi-hw.com/p/qi-kernel/825fad0 | 19:59 |
qi-bot | [commit] Paul Cercueil: MIPS: A320: hide the fb console at startup. (jz-3.2) http://qi-hw.com/p/qi-kernel/eab139c | 19:59 |
qi-bot | [commit] Paul Cercueil: InputManager: prevent unmapped buttons from generating events. (master) http://qi-hw.com/p/gmenu2x/273770d | 20:51 |
qi-bot | [commit] Paul Cercueil: Add 'suspend' icon. (master) http://qi-hw.com/p/gmenu2x/eb86d25 | 21:14 |
qi-bot | [commit] Paul Cercueil: Dingux port: added a "suspend" link on the "settings" tab. (master) http://qi-hw.com/p/gmenu2x/4935bae | 21:14 |
qi-bot | [commit] Werner Almesberger: m1/ledravaganza/mpx.fig: labeled LEDs and resistors (master) http://qi-hw.com/p/wernermisc/091f93a | 08:08 |
---|
qi-bot | [commit] Werner Almesberger: m1/ledravaganza/: draft proposal and example circuit for M1r4 LED matrix (master) http://qi-hw.com/p/wernermisc/4e044fc | 11:14 |
---|
qi-bot | [commit] Werner Almesberger: m1/xbrd/xbrd.fpd: M1r4 extension board draft (top view, WIP) (master) http://qi-hw.com/p/wernermisc/7f0d0d6 | 14:48 |
---|---|---|
qi-bot | [commit] Werner Almesberger: xbrd: rename xbrd.fpd to top.fpd (only one view per file) (master) http://qi-hw.com/p/wernermisc/a756aa6 | 19:10 |
qi-bot | [commit] Werner Almesberger: xbrd/top.fpd: hatch wall; added space between headers measurement (master) http://qi-hw.com/p/wernermisc/aafdb9c | 19:10 |
qi-bot | [commit] Werner Almesberger: xbrd: Makefile, README, and name change for upload location (master) http://qi-hw.com/p/wernermisc/c8889d9 | 19:10 |
qi-bot | [commit] Werner Almesberger: already "fped -T" dumped, not only "fped -T -T". test/Common didn't use -T -T. (master) http://qi-hw.com/p/fped/ea9b8f9 | 19:35 |
qi-bot | [commit] Werner Almesberger: obj.c: move vector to coord translation to separate function (for future extension) (master) http://qi-hw.com/p/fped/c8f5d29 | 19:35 |
qi-bot | [commit] Werner Almesberger: vector names can now be resolved at instantiation (partially implemented) (master) http://qi-hw.com/p/fped/cb34a28 | 19:35 |
qi-bot | [commit] Werner Almesberger: don't draw center cross in full-page Postscript (master) http://qi-hw.com/p/fped/e2749ea | 19:35 |
qi-bot | [commit] Werner Almesberger: ircstat: end of 2011 update (master) http://qi-hw.com/p/wernermisc/bb1cf5c | 19:37 |
qi-bot | [commit] Werner Almesberger: m1/case/: small corrections and slow down to 5 mm/s to save endmills (master) http://qi-hw.com/p/wernermisc/6151926 | 19:37 |
qi-bot | [commit] Lars-Peter Clausen: Revert "ASoC: JZ4740: Support buffer size that is not a multiple of period size." (jz-3.2) http://qi-hw.com/p/qi-kernel/069052c | 00:07 |
---|---|---|
qi-bot | [commit] Lars-Peter Clausen: ASoC: JZ4740: Enforce buffer size to be a multiple of period size (jz-3.2) http://qi-hw.com/p/qi-kernel/088e324 | 00:07 |
qi-bot | [commit] Lars-Peter Clausen: ASoC: JZ4740: Enforce buffer size to be a multiple of period size (jz-3.2) http://qi-hw.com/p/qi-kernel/f43b447 | 00:08 |
qi-bot | [commit] Lluís Batlle i Rossell: MIPS: Enable vmlinuz for JZ4740 (jz-3.2) http://qi-hw.com/p/qi-kernel/c389c32 | 23:53 |
---|---|---|
qi-bot | [commit] Axel Lin: ASoC: jz4740: Convert qi_lb60 to use snd_soc_register_card() (jz-3.2) http://qi-hw.com/p/qi-kernel/c80c63a | 23:53 |
qi-bot | [commit] Lars-Peter Clausen: Refresh nanonote defconfig (jz-3.2) http://qi-hw.com/p/qi-kernel/53cc9ea | 23:53 |
qi-bot | [commit] Lars-Peter Clausen: Rename nanonote_defconfig to qi_lb60_defconfig (jz-3.2) http://qi-hw.com/p/qi-kernel/ef83a07 | 23:53 |
qi-bot | [commit] Paul Cercueil: fbcon: add parameter to toggle bind on startup. (jz-3.2) http://qi-hw.com/p/qi-kernel/89aa707 | 00:20 |
---|---|---|
qi-bot | [commit] Paul Cercueil: MIPS: JZ4740: SLCD: added a parameter to select the panel. (jz-3.2) http://qi-hw.com/p/qi-kernel/a7bcc4e | 00:20 |
qi-bot | [commit] Paul Cercueil: OpenDingux: initrd: updated mininit to latest version. (jz-3.2) http://qi-hw.com/p/qi-kernel/848db14 | 00:20 |
qi-bot | [commit] Werner Almesberger: m1nor: lock the read-only portions of the flash after flashing (master) http://qi-hw.com/p/wernermisc/2e46384 | 17:04 |
---|---|---|
qi-bot | [commit] Paul Cercueil: fbcon: continue parsing parameters after an error. (jz-3.2) http://qi-hw.com/p/qi-kernel/a836fb4 | 19:40 |
qi-bot | [commit] Paul Cercueil: fbcon: optimize parameters parsing loop. (jz-3.2) http://qi-hw.com/p/qi-kernel/b4105ec | 19:40 |
qi-bot | [commit] Wolfgang Spraul: Werner: we can drop the ERC pin exceptions patches. (master) http://qi-hw.com/p/eda-tools/78b197d | 10:24 |
---|---|---|
qi-bot | [commit] Wolfgang Spraul: merged with cmdline patches (master) http://qi-hw.com/p/eda-tools/771599b | 10:25 |
qi-bot | [commit] Wolfgang Spraul: patch cleanup (master) http://qi-hw.com/p/eda-tools/724ca1e | 10:50 |
qi-bot | [commit] Wolfgang Spraul: updated patchset to kicad rev 3351 (current head) (master) http://qi-hw.com/p/eda-tools/0bdf904 | 11:21 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: qi_lb60: Look for NAND chip in bank 1. (jz-3.2) http://qi-hw.com/p/qi-kernel/450999b | 21:43 |
qi-bot | [commit] Wolfgang Spraul: uplevel cmdline patches (entire set won't build right now) (master) http://qi-hw.com/p/eda-tools/a277779 | 23:28 |
---|
qi-bot | [commit] Paul Cercueil: fbcon: prevent possible buffer overflow. (jz-3.1) http://qi-hw.com/p/qi-kernel/d3d3274 | 19:02 |
---|---|---|
qi-bot | [commit] Paul Cercueil: OpenDingux: initrd: updated mininit to latest version. (jz-3.1) http://qi-hw.com/p/qi-kernel/76a1add | 19:02 |
qi-bot | [commit] Paul Cercueil: MIPS: JZ4740: SLCD: added a parameter to select the panel. (jz-3.1) http://qi-hw.com/p/qi-kernel/17a69f1 | 19:02 |
qi-bot | [commit] Paul Cercueil: OpenDingux: added OpenDingux logo. (jz-3.1) http://qi-hw.com/p/qi-kernel/8845bf5 | 19:02 |
qi-bot | [commit] Paul Cercueil: MIPS: JZ4740: SLCD: show linux logo at init. (jz-3.1) http://qi-hw.com/p/qi-kernel/959cebc | 19:02 |
qi-bot | [commit] Paul Cercueil: fbcon: read parameters as unsigned values. (jz-3.1) http://qi-hw.com/p/qi-kernel/694a338 | 19:02 |
qi-bot | [commit] Paul Cercueil: MIPS: A320: use the new OpenDingux logo. (jz-3.1) http://qi-hw.com/p/qi-kernel/e3487b1 | 19:02 |
qi-bot | [commit] Paul Cercueil: fbcon: optimize param read loop with 'continue' (jz-3.1) http://qi-hw.com/p/qi-kernel/ae92f24 | 19:02 |
qi-bot | [commit] Paul Cercueil: fbcon: add parameter to toggle bind on startup. (jz-3.1) http://qi-hw.com/p/qi-kernel/cf56359 | 19:02 |
qi-bot | [commit] Paul Cercueil: MIPS: A320: hide the fb console at startup. (jz-3.1) http://qi-hw.com/p/qi-kernel/1f176f0 | 19:02 |
qi-bot | [commit] Paul Cercueil: fbcon: use kstrtouint to respect initial behaviour. (jz-3.2) http://qi-hw.com/p/qi-kernel/61e3c30 | 19:02 |
qi-bot | [commit] Paul Cercueil: fbcon: prevent possible buffer overflow. (jz-3.2) http://qi-hw.com/p/qi-kernel/828e6f6 | 19:02 |
qi-bot | [commit] Wolfgang Spraul: added small bash script to test kicad cmdline patches (master) http://qi-hw.com/p/eda-tools/4d628c3 | 21:01 |
qi-bot | [commit] kyak: config.full_system: enable swap-utils (master) http://qi-hw.com/p/openwrt-packages/0e220dd | 19:30 |
---|---|---|
qi-bot | [commit] kyak: fbterm: incorporate viric's patch for Ben LCD (master) http://qi-hw.com/p/openwrt-packages/8389ba0 | 20:39 |
qi-bot | [commit] Jiri Brozovsky: Compiler from (limited) C to language used by HP48 calculators (master) http://qi-hw.com/p/openwrt-packages/5edbd6c | 19:09 |
---|
qi-bot | [commit] Werner Almesberger: m1/patches/rtems/fix-ftpd-root.patch: allow ftpd to start in /ssd/ (by Xiangfu Liu) (master) http://qi-hw.com/p/wernermisc/73b9b50 | 13:20 |
---|
qi-bot | [commit] kyak: libgpgme is in upstream openwrt now (master) http://qi-hw.com/p/openwrt-packages/e659cd7 | 05:39 |
---|---|---|
qi-bot | [commit] kyak: libassuan is in upstream openwrt now (master) http://qi-hw.com/p/openwrt-packages/8d36553 | 05:39 |
qi-bot | [commit] kyak: centerim: gpgme is now libgpgme (master) http://qi-hw.com/p/openwrt-packages/4d3fbf0 | 05:39 |
qi-bot | [commit] kyak: config.full_system: s/gpgme/libgpgme (master) http://qi-hw.com/p/openwrt-packages/1ea6dda | 05:39 |
qi-bot | [commit] Werner Almesberger: m1rc3/usbpwr/: added tests with an unfriendly capacitative load (master) http://qi-hw.com/p/wernermisc/a673d62 | 06:59 |
---|
qi-bot | [commit] Peter Zotov: Reworked directory structure. (master) http://qi-hw.com/p/xburst-tools/6a1f486 | 02:50 |
---|---|---|
qi-bot | [commit] Peter Zotov: Added scripts for easy setting of XZ0032 ECC modes. (master) http://qi-hw.com/p/xburst-tools/8c9d1a8 | 02:50 |
qi-bot | [commit] Dmitriy Beykun: Added minios restore script. (master) http://qi-hw.com/p/xburst-tools/56cd69d | 02:50 |
qi-bot | [commit] Dmitriy Beykun: Added typical XZ0032 linux flash script. (master) http://qi-hw.com/p/xburst-tools/64290a8 | 02:50 |
qi-bot | [commit] Peter Zotov: Fixed paths. (master) http://qi-hw.com/p/xburst-tools/1b01264 | 02:50 |
qi-bot | [commit] Ivan Epifanov: Fixed rootfs NAND settings in XZ0032 sample flashing script. (master) http://qi-hw.com/p/xburst-tools/27d48e9 | 02:50 |
qi-bot | [commit] Peter Zotov: Removed unneeded -Wunused-result flag. (master) http://qi-hw.com/p/xburst-tools/cfab51e | 02:50 |
qi-bot | [commit] Peter Zotov: Removed -Werror from GCC flags, as it causes problems on a lot of GCC versions. (master) http://qi-hw.com/p/xburst-tools/f5075c8 | 02:50 |
qi-bot | [commit] Peter Zotov: Updated ECC settings to support new Linux kernel. (master) http://qi-hw.com/p/xburst-tools/743cae0 | 02:50 |
qi-bot | [commit] Xiangfu Liu: add Makefile.am for xburst-tools autoconf (master) http://qi-hw.com/p/xburst-tools/da72c35 | 02:50 |
qi-bot | [commit] Xiangfu Liu: those file auto created by automake system (master) http://qi-hw.com/p/xburst-tools/ce7446f | 02:50 |
qi-bot | [commit] Peter Zotov: Changed everything to use autotools. (master) http://qi-hw.com/p/xburst-tools/8b4338f | 02:50 |
qi-bot | [commit] Peter Zotov: Rename config.h to app_config.h, as old name conflicts with autoconf. (master) http://qi-hw.com/p/xburst-tools/04ed523 | 02:50 |
qi-bot | [commit] Xiangfu Liu: remove useless config.h (master) http://qi-hw.com/p/xburst-tools/c9f7c85 | 02:50 |
qi-bot | [commit] Xiangfu Liu: add print version (master) http://qi-hw.com/p/xburst-tools/2a49d71 | 02:50 |
qi-bot | [commit] Sergey Gridassov: Added Linux loader. (master) http://qi-hw.com/p/xburst-tools/c739570 | 02:50 |
qi-bot | [commit] Ignacio Garcia Perez: FIXED: values of CPUSPEED greater than 255 were misread because the value was directly read into handle->cfg.cpu_speed (uint8_t) before dividing it by the external crystal frequency, and overflow resulted. Now intermediate variable is used and only the final result of the division is placed in handle->cfg.cpu_speed. (master) http://qi-hw.com/p/xburst-tools/1cfb149 | 02:50 |
qi-bot | [commit] Peter Zotov: Fix -v to be less ugly. (master) http://qi-hw.com/p/xburst-tools/792376f | 02:50 |
qi-bot | [commit] Xiangfu Liu: remove jzboot submodule. will be merge with subtree (master) http://qi-hw.com/p/xburst-tools/593128c | 02:50 |
qi-bot | [commit] Xiangfu Liu: Merge jzboot as xburst-tools subdirectory (master) http://qi-hw.com/p/xburst-tools/1a1cdcb | 02:50 |
qi-bot | [commit] Xiangfu Liu: cleanup project COPYING, ChangeLog files (master) http://qi-hw.com/p/xburst-tools/c71ce8e | 03:13 |
qi-bot | [commit] Maarten ter Huurne: Cleanup of touch screen code. (master) http://qi-hw.com/p/gmenu2x/944ab86 | 14:51 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: Made GMenu2X::ts private. (master) http://qi-hw.com/p/gmenu2x/1ad6b2f | 14:51 |
qi-bot | [commit] Maarten ter Huurne: Made two fields that are only used on GP2X available only on that platform. (master) http://qi-hw.com/p/gmenu2x/c2afbfd | 14:51 |
qi-bot | [commit] Maarten ter Huurne: Removed ability to configure custom working directory. (master) http://qi-hw.com/p/gmenu2x/0622c42 | 14:51 |
qi-bot | [commit] Maarten ter Huurne: Removed per-app gamma setting. (master) http://qi-hw.com/p/gmenu2x/d90ed63 | 14:51 |
qi-bot | [commit] Maarten ter Huurne: Mark Link::run() as pure virtual. (master) http://qi-hw.com/p/gmenu2x/4ae4fc6 | 14:51 |
qi-bot | [commit] Maarten ter Huurne: Made LinkApp::launch() private. (master) http://qi-hw.com/p/gmenu2x/0043ea5 | 14:51 |
qi-bot | [commit] Werner Almesberger: m1rc3/usbpwr/: M1pre-rc4 USB short-circuit tests (master) http://qi-hw.com/p/wernermisc/8f98330 | 04:29 |
---|---|---|
qi-bot | [commit] Werner Almesberger: m1rc3/usbpwr/README: corrected typo in 5.0 V minimum input voltage (master) http://qi-hw.com/p/wernermisc/017e7be | 11:54 |
qi-bot | [commit] Werner Almesberger: m1rc3/usbpwr/README: corrected averaging: 1 PLC instead of 10 PLC (master) http://qi-hw.com/p/wernermisc/8361bfa | 11:54 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/4/LOG: detailed log of the M1pre-rc4 tests (master) http://qi-hw.com/p/wernermisc/ce6a4d8 | 17:48 |
---|
qi-bot | [commit] Werner Almesberger: labsw/mech/Makefile: rm -f will do nicely, no need for rm -rf (master) http://qi-hw.com/p/wernermisc/0d62423 | 08:10 |
---|---|---|
qi-bot | [commit] Werner Almesberger: m1/case/: front panel modified for M1pre-rc4 (with raised USB) (master) http://qi-hw.com/p/wernermisc/f1af1b8 | 08:10 |
qi-bot | [commit] Werner Almesberger: m1/case/: added rear panel with JTAG hole (master) http://qi-hw.com/p/wernermisc/054df9f | 08:10 |
qi-bot | [commit] Werner Almesberger: cameo: also connect paths from gnuplot files (master) http://qi-hw.com/p/cae-tools/90254ef | 08:12 |
qi-bot | [commit] Werner Almesberger: m1/BUILD-CHEAT-SHEET: various updates (master) http://qi-hw.com/p/wernermisc/80f981e | 08:12 |
qi-bot | [commit] Werner Almesberger: m1/case/README: mention that the IR receiver is blocked (master) http://qi-hw.com/p/wernermisc/3002866 | 12:38 |
qi-bot | [commit] Werner Almesberger: dxf2x/dxf2gp: simple DXF to Gnuplot converter (master) http://qi-hw.com/p/cae-tools/7354ede | 19:31 |
---|
qi-bot | [commit] Xiangfu Liu: reflash_ben.sh, unnecessary re-download of .ubi.bz2 rootfs (master) http://qi-hw.com/p/openwrt-packages/55b3523 | 01:19 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: 4th: update to 3.61.3 (master) http://qi-hw.com/p/openwrt-packages/26a5a4d | 04:17 |
qi-bot | [commit] Werner Almesberger: ircstat/ML: updated for November 2011 (master) http://qi-hw.com/p/wernermisc/512a8d5 | 10:58 |
---|---|---|
qi-bot | [commit] Werner Almesberger: m1/patches/rtems/: milkymist-midi-opt.patch has been applied upstream (master) http://qi-hw.com/p/wernermisc/ec357b7 | 10:58 |
qi-bot | [commit] Werner Almesberger: m1/patches/rtems: added milkymist-midi-opt.patch (master) http://qi-hw.com/p/wernermisc/f331607 | 20:20 |
---|---|---|
qi-bot | [commit] Werner Almesberger: midigen/: MIDI traffic generator (master) http://qi-hw.com/p/wernermisc/395458b | 20:25 |
qi-bot | [commit] Xiangfu Liu: wpan.mk: fix typo thanks blogic and jivs (master) http://qi-hw.com/p/openwrt-xburst/fdd8393 | 13:29 |
---|
qi-bot | [commit] Werner Almesberger: m1/patches/rtems/: added Milkymist-specific USB-MIDI forwarding (master) http://qi-hw.com/p/wernermisc/a946aac | 09:47 |
---|---|---|
qi-bot | [commit] Werner Almesberger: m1nor: accept multiple file arguments; clarified diagnostics (master) http://qi-hw.com/p/wernermisc/037be50 | 23:05 |
qi-bot | [commit] Werner Almesberger: m1/BUILD-CHEAT-SHEET: updated for new RTEMS patch and local changes (master) http://qi-hw.com/p/wernermisc/9343b61 | 23:11 |
qi-bot | [commit] Werner Almesberger: m1/patches/rtems/series: all RTEMS patches are now applied upstream (master) http://qi-hw.com/p/wernermisc/740d0e4 | 05:30 |
---|---|---|
qi-bot | [commit] Werner Almesberger: m1/BUILD-CHEAT-SHEET: we currently don't need a local quilt stack (master) http://qi-hw.com/p/wernermisc/49bd8fd | 05:30 |
qi-bot | [commit] Werner Almesberger: midi2osc: added channel wildcard and overriding the value (master) http://qi-hw.com/p/wernermisc/af0c0ab | 14:00 |
---|---|---|
qi-bot | [commit] Werner Almesberger: midi2osc/LV3: Faderfox LV3 mappings (work in progress) (master) http://qi-hw.com/p/wernermisc/59b2a99 | 14:00 |
qi-bot | [commit] Werner Almesberger: m1/patches/rtems/: Milkymist-specific patches are in upstream (update by Xiangfu) (master) http://qi-hw.com/p/wernermisc/f6fd776 | 21:50 |
qi-bot | [commit] Werner Almesberger: m1/tools/: xdltap and xdlfixes, to add taps to FPGA signals (master) http://qi-hw.com/p/wernermisc/e397a87 | 00:27 |
---|---|---|
qi-bot | [commit] Werner Almesberger: m1/patches/: added milkymist-videoformat.patch (posted Fri Nov 25) (master) http://qi-hw.com/p/wernermisc/6ba362d | 04:10 |
qi-bot | [commit] Werner Almesberger: m1/patches/: include fix for timer (master) http://qi-hw.com/p/wernermisc/b94d0bd | 04:19 |
qi-bot | [commit] Werner Almesberger: m1/BUILD-CHEAT-SHEET: poorly organized notes for how to build things (master) http://qi-hw.com/p/wernermisc/9551dba | 10:42 |
qi-bot | [commit] Werner Almesberger: m1/patches/: drop fix-*-includes (glitch) and chain-first (applied upstream) (master) http://qi-hw.com/p/wernermisc/f9583fb | 18:43 |
qi-bot | [commit] Werner Almesberger: m1/BUILD-CHEAT-SHEET: added how to get the RTEMS sources (master) http://qi-hw.com/p/wernermisc/3a3c77c | 18:43 |
qi-bot | [commit] Werner Almesberger: m1/patches/rtems: drop rbtree-container-of (fixed upstream) (master) http://qi-hw.com/p/wernermisc/3a82787 | 18:43 |
qi-bot | [commit] Werner Almesberger: m1/patches: added soc11_2.diff posted by Sebastien on Nov 23 (master) http://qi-hw.com/p/wernermisc/94fd599 | 08:22 |
---|
qi-bot | [commit] Werner Almesberger: midi2osc: new option -d (debug) to print MIDI messages we receive (master) http://qi-hw.com/p/wernermisc/571af6d | 03:25 |
---|---|---|
qi-bot | [commit] Werner Almesberger: midi2osc: added channel and control number mapping (master) http://qi-hw.com/p/wernermisc/2d50444 | 05:51 |
qi-bot | [commit] Werner Almesberger: m1/curiosity-demo: sources of the "curiosity" demo clip (master) http://qi-hw.com/p/wernermisc/1c5cbca | 14:02 |
qi-bot | [commit] Werner Almesberger: m1/curiosity-demo/README: added credits for background music (master) http://qi-hw.com/p/wernermisc/f2b4669 | 14:05 |
qi-bot | [commit] Werner Almesberger: neocon: moved over from svn.openmoko.org/developers/werner/neocon/ (master) http://qi-hw.com/p/wernermisc/7d0683b | 20:29 |
---|---|---|
qi-bot | [commit] Werner Almesberger: neocon.c: copyright update and whitespace cleanup (master) http://qi-hw.com/p/wernermisc/f3e1f92 | 20:29 |
qi-bot | [commit] Werner Almesberger: neocon.c: new option -c to enable ONLCR for console output (master) http://qi-hw.com/p/wernermisc/4040ad3 | 20:29 |
qi-bot | [commit] Werner Almesberger: m1nor: accept system.fpg as alias for soc.fpg (master) http://qi-hw.com/p/wernermisc/8b92936 | 20:29 |
qi-bot | [commit] Werner Almesberger: m1/tools/xse-sane-init64: nice and tidy setup script for the Xilinx tools (master) http://qi-hw.com/p/wernermisc/448e02f | 22:31 |
qi-bot | [commit] Werner Almesberger: rtems patches: added new UART and IRQ rearrangement, plus include fix (master) http://qi-hw.com/p/wernermisc/58da15e | 19:36 |
---|---|---|
qi-bot | [commit] Werner Almesberger: m1/tools/m1nor: flash a file to M1 NOR partition selected by the file name (master) http://qi-hw.com/p/wernermisc/6dc6174 | 20:03 |
qi-bot | [commit] Werner Almesberger: m1/tools/README: m1nor description (master) http://qi-hw.com/p/wernermisc/ba5a392 | 20:17 |
qi-bot | [commit] Werner Almesberger: m1nor: "pld reconfigure" at then end, to properly exit fjmem (suggested by Michael Walle) (master) http://qi-hw.com/p/wernermisc/bf6c207 | 23:23 |
qi-bot | [commit] Ayla: Removed per-application volume setting. (master) http://qi-hw.com/p/gmenu2x/c7af4b1 | 13:50 |
---|---|---|
qi-bot | [commit] Ayla: fbcon: use kstrtoint instead of deprecated function simple_strtoul. (jz-3.1) http://qi-hw.com/p/qi-kernel/1ad417b | 14:41 |
qi-bot | [commit] Xiangfu Liu: this commit break the ks7010 driver. (master) http://qi-hw.com/p/openwrt-xburst/ae1b777 | 07:13 |
---|
qi-bot | [commit] Werner Almesberger: USB analysis tools (master) http://qi-hw.com/p/wernermisc/ed85930 | 19:59 |
---|
qi-bot | [commit] Xiangfu Liu: nanonote-files without console option make /dev/console un-readable (master) http://qi-hw.com/p/openwrt-packages/bab2d75 | 07:16 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: csound: make some progress (master) http://qi-hw.com/p/openwrt-packages/75ee508 | 08:56 |
qi-bot | [commit] Werner Almesberger: m1/patches/rtems/: pending RTEMS patches (relative to latest CVS) (master) http://qi-hw.com/p/wernermisc/aa0022d | 12:28 |
---|---|---|
qi-bot | [commit] Werner Almesberger: m1/patches/rtems/README: explain how to use this (master) http://qi-hw.com/p/wernermisc/a072d48 | 12:29 |
qi-bot | [commit] Werner Almesberger: m1/patches/rtems/: updated status of patches that have moved into bugzilla (master) http://qi-hw.com/p/wernermisc/405a150 | 23:16 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: change load kernel size (master) http://qi-hw.com/p/openwrt-xburst/ef46a6d | 04:46 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: nanonote-files: mtd.nn change load kernel size (master) http://qi-hw.com/p/openwrt-packages/71ad57f | 04:46 |
qi-bot | [commit] Xiangfu Liu: reflash_ben.sh : add clean bootloader env command, update version (master) http://qi-hw.com/p/openwrt-packages/86b9b5e | 05:08 |
qi-bot | [commit] Xiangfu Liu: nanonote-files: update version to 2.0 (master) http://qi-hw.com/p/openwrt-packages/26ecb08 | 05:29 |
qi-bot | [commit] Xiangfu Liu: tempest-for-eliza: include README in package (master) http://qi-hw.com/p/openwrt-packages/bd6f2f8 | 05:29 |
qi-bot | [commit] Xiangfu Liu: new icon for gtkguitune (master) http://qi-hw.com/p/gmenu2x/6cc674a | 06:31 |
qi-bot | [commit] Xiangfu Liu: new icon for lingot (master) http://qi-hw.com/p/gmenu2x/c3ea290 | 06:31 |
qi-bot | [commit] Xiangfu Liu: new icon for gjay (master) http://qi-hw.com/p/gmenu2x/2dcddaf | 06:31 |
qi-bot | [commit] Xiangfu Liu: update games section icon (master) http://qi-hw.com/p/gmenu2x/d7bb072 | 06:31 |
qi-bot | [commit] Xiangfu Liu: new icon for listener (master) http://qi-hw.com/p/gmenu2x/34af6eb | 06:31 |
qi-bot | [commit] Xiangfu Liu: gmenu2x: update to latest commit (master) http://qi-hw.com/p/openwrt-packages/0d9ef8b | 06:33 |
qi-bot | [commit] Xiangfu Liu: new icon for mediatomb (master) http://qi-hw.com/p/gmenu2x/c5667f9 | 06:45 |
qi-bot | [commit] Xiangfu Liu: gmenu2x: update to latest commit (master) http://qi-hw.com/p/openwrt-packages/b4c6961 | 06:46 |
qi-bot | [commit] Xiangfu Liu: use the contrast for brightness in nanonote (master) http://qi-hw.com/p/gmenu2x/1cd6089 | 07:06 |
qi-bot | [commit] Xiangfu Liu: update nanonote backlight to new driver (master) http://qi-hw.com/p/gmenu2x/5d6dcfb | 07:06 |
qi-bot | [commit] Xiangfu Liu: display oldbacklight value when start Settings (master) http://qi-hw.com/p/gmenu2x/ea6a809 | 07:21 |
qi-bot | [commit] Xiangfu Liu: gmenu2x: update to latest commit (master) http://qi-hw.com/p/openwrt-packages/34a8b30 | 07:35 |
qi-bot | [commit] Xiangfu Liu: new 320x240 wallpapers by Jane (master) http://qi-hw.com/p/gmenu2x/1f955e5 | 08:02 |
qi-bot | [commit] Xiangfu Liu: gmenu2x: update to latest commit (master) http://qi-hw.com/p/openwrt-packages/4f35f78 | 08:04 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: change load kernel size (master) http://qi-hw.com/p/openwrt-xburst/7d99e71 | 09:54 |
qi-bot | [commit] Xiangfu Liu: nanonote: add nanonote slash screen (master) http://qi-hw.com/p/openwrt-xburst/767634d | 09:54 |
qi-bot | [commit] Xiangfu Liu: nanonote: select the nanonote slash screen (master) http://qi-hw.com/p/openwrt-xburst/fe081e3 | 09:54 |
qi-bot | [commit] Xiangfu Liu: nanonote-files: config.full_system don't compile atben (master) http://qi-hw.com/p/openwrt-packages/19577b0 | 02:24 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: xburst qi_lb60 disable WPAN kernel options (master) http://qi-hw.com/p/openwrt-xburst/c94dd5c | 03:07 |
qi-bot | [commit] Werner Almesberger: midi2osc: slight README and Makefile cleanup (master) http://qi-hw.com/p/wernermisc/20283fe | 07:13 |
qi-bot | [commit] Xiangfu Liu: nanonote-fiels: wpan add command config another ben (master) http://qi-hw.com/p/openwrt-packages/649037a | 15:47 |
qi-bot | [commit] Werner Almesberger: midi2osc/: simple MIDI to OSC forwarder (master) http://qi-hw.com/p/wernermisc/102033a | 16:44 |
---|
qi-bot | [commit] Xiangfu Liu: nanonote-files: add an atben setup script file (master) http://qi-hw.com/p/openwrt-packages/098a448 | 16:14 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: xburst: ben nanonote: first add WPAN(atben,atusb) driver (master) http://qi-hw.com/p/openwrt-xburst/af26c2e | 16:31 |
qi-bot | [commit] Xiangfu Liu: add WPAN(atben,atusb) kernel module file (master) http://qi-hw.com/p/openwrt-xburst/7a36062 | 16:31 |
qi-bot | [commit] Xiangfu Liu: WPAN: disable AutoLoad on at86rf230, spi_atben. (master) http://qi-hw.com/p/openwrt-xburst/777c13b | 16:31 |
qi-bot | [commit] Xiangfu Liu: new package: bonnie: useful tool to determine the speed of your filesystem (master) http://qi-hw.com/p/openwrt-packages/114eb6b | 02:34 |
---|
qi-bot | [commit] Xiangfu Liu: pygame: add description (master) http://qi-hw.com/p/openwrt-packages/8c7304d | 03:20 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ircstat/stat: draw also the sum with a thick line (master) http://qi-hw.com/p/wernermisc/4322101 | 05:51 |
qi-bot | [commit] Xiangfu Liu: new package tinygl: @BROKEN depends on X11 (master) http://qi-hw.com/p/openwrt-packages/99c164e | 06:34 |
qi-bot | [commit] Xiangfu Liu: new package: libfixgl: an implementation of the OpenGL standard for realtime 3D graphics, based on fixed point arithmetic (master) http://qi-hw.com/p/openwrt-packages/e005176 | 08:23 |
qi-bot | [commit] Xiangfu Liu: nanonote: base-files: add hostname (master) http://qi-hw.com/p/openwrt-xburst/78cc669 | 01:13 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: xburst: update config-3.0 (master) http://qi-hw.com/p/openwrt-xburst/8106b60 | 01:13 |
qi-bot | [commit] Xiangfu Liu: config-3.0: enable FPU for debian system (master) http://qi-hw.com/p/openwrt-xburst/9912f3c | 01:13 |
qi-bot | [commit] Xiangfu Liu: ben-wpan: add INSTALL-Ben INSTALL-PC USAGE as a doc package (master) http://qi-hw.com/p/openwrt-packages/32e497b | 03:33 |
qi-bot | [commit] Xiangfu Liu: nanonote-files: config.full_system: include ben-wpan-doc (master) http://qi-hw.com/p/openwrt-packages/6a104ba | 03:33 |
qi-bot | [commit] Xiangfu Liu: xburst: update config-3.0 (master) http://qi-hw.com/p/openwrt-xburst/73e5dad | 14:46 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/3/: characteristics of voltage dropper (master) http://qi-hw.com/p/wernermisc/f8f88a4 | 01:58 |
---|---|---|
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/3/: fixed typo in data, made plot prettier (master) http://qi-hw.com/p/wernermisc/32a7ad2 | 01:58 |
qi-bot | [commit] Xiangfu: INSTALL-Ben: update (master) http://qi-hw.com/p/ben-wpan/153b9e3 | 06:45 |
---|---|---|
qi-bot | [commit] Xiangfu: INSTALL-PC: fix typo, install libnl-dev for zigbee (master) http://qi-hw.com/p/ben-wpan/d7bd1b9 | 06:51 |
qi-bot | [commit] Xiangfu: INSTALL-Ben: libnl-1 include in upstream packages (master) http://qi-hw.com/p/ben-wpan/0e35178 | 07:40 |
qi-bot | [commit] Xiangfu: INSTALL-Ben: dirtpan also included in upstream. small cleanup (master) http://qi-hw.com/p/ben-wpan/ac76df9 | 07:51 |
qi-bot | [commit] Xiangfu Liu: config.full_system: add ben-wpan packages (master) http://qi-hw.com/p/openwrt-packages/8047990 | 08:01 |
qi-bot | [commit] kyak: alex4: resolve recursive dependency alex4<->alex4-data (master) http://qi-hw.com/p/openwrt-packages/eb188f7 | 10:18 |
---|
qi-bot | [commit] Maarten ter Huurne: PowerSaver: re-layouted code. (master) http://qi-hw.com/p/gmenu2x/ae685a9 | 08:43 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: InputManager: SDL_NumJoysticks is a function, try calling it. (master) http://qi-hw.com/p/gmenu2x/0cb1645 | 08:43 |
qi-bot | [commit] Maarten ter Huurne: InputManager: re-layouted code. (master) http://qi-hw.com/p/gmenu2x/f969697 | 08:43 |
qi-bot | [commit] Maarten ter Huurne: Include SDL header as <SDL.h> instead of <SDL/SDL.h>. (master) http://qi-hw.com/p/gmenu2x/ba60036 | 08:43 |
qi-bot | [commit] Maarten ter Huurne: InputManager: reduce namespace pollution. (master) http://qi-hw.com/p/gmenu2x/c6db9ff | 08:43 |
qi-bot | [commit] Maarten ter Huurne: InputManager: C++-style type definitions. (master) http://qi-hw.com/p/gmenu2x/315bf0a | 08:43 |
qi-bot | [commit] Maarten ter Huurne: BrowseDialog: simplify code using InputManager::waitForPressedButton(). (master) http://qi-hw.com/p/gmenu2x/ccf55e5 | 08:43 |
qi-bot | [commit] Maarten ter Huurne: MessageBox: minor cleanup. (master) http://qi-hw.com/p/gmenu2x/40fd35d | 08:43 |
qi-bot | [commit] Maarten ter Huurne: SettingsDialog: simplify code using InputManager::waitForPressedButton(). (master) http://qi-hw.com/p/gmenu2x/a38c283 | 08:43 |
qi-bot | [commit] Maarten ter Huurne: MenuSettingBool: Support toggling of boolean settings using left/right. (master) http://qi-hw.com/p/gmenu2x/641c989 | 08:43 |
qi-bot | [commit] Maarten ter Huurne: InputManager: have "joystick" as a member instead of a global. (master) http://qi-hw.com/p/gmenu2x/433be5d | 08:43 |
qi-bot | [commit] Maarten ter Huurne: InputManager: Don't break if joystick support is disabled in SDL. (master) http://qi-hw.com/p/gmenu2x/9548aa0 | 08:43 |
qi-bot | [commit] Maarten ter Huurne: InputManager: improved config file parsing. (master) http://qi-hw.com/p/gmenu2x/a685b43 | 08:43 |
qi-bot | [commit] Maarten ter Huurne: InputManager: removed "clear" and "manual" logical buttons. (master) http://qi-hw.com/p/gmenu2x/28f6cd2 | 15:45 |
qi-bot | [commit] Maarten ter Huurne: MessageBox: Use arrays instead of vectors for buttons. (master) http://qi-hw.com/p/gmenu2x/3252c77 | 15:45 |
qi-bot | [commit] Maarten ter Huurne: MessageBox: header cleanups. (master) http://qi-hw.com/p/gmenu2x/9e876a6 | 15:45 |
qi-bot | [commit] Maarten ter Huurne: SettingsDialog: removed unused action variable and macros. (master) http://qi-hw.com/p/gmenu2x/0b878c1 | 15:45 |
qi-bot | [commit] Maarten ter Huurne: InputDialog: re-layouted code. (master) http://qi-hw.com/p/gmenu2x/fa5a981 | 15:45 |
qi-bot | [commit] Maarten ter Huurne: InputDialog: do not return anything from drawVirtualKeyboard(). (master) http://qi-hw.com/p/gmenu2x/55cabce | 15:45 |
qi-bot | [commit] Maarten ter Huurne: IconButton: removed unused local variable. (master) http://qi-hw.com/p/gmenu2x/76613d1 | 15:45 |
qi-bot | [commit] Maarten ter Huurne: IconButton: fixed up-to-date check in setPosition(). (master) http://qi-hw.com/p/gmenu2x/abe9130 | 15:45 |
qi-bot | [commit] Maarten ter Huurne: IconButton: removed unused functionality. (master) http://qi-hw.com/p/gmenu2x/62facf4 | 15:45 |
qi-bot | [commit] Maarten ter Huurne: IconButton: header cleanup. (master) http://qi-hw.com/p/gmenu2x/cfd294b | 15:45 |
qi-bot | [commit] Maarten ter Huurne: InputDialog: header cleanup. (master) http://qi-hw.com/p/gmenu2x/40fcd51 | 15:45 |
qi-bot | [commit] Maarten ter Huurne: LinkApp: various cleanups. (master) http://qi-hw.com/p/gmenu2x/14bae04 | 15:45 |
qi-bot | [commit] Maarten ter Huurne: cpu: Include header instead of repeating function declaration. (master) http://qi-hw.com/p/gmenu2x/33e7f1e | 15:45 |
qi-bot | [commit] Maarten ter Huurne: Massive header cleanup. (master) http://qi-hw.com/p/gmenu2x/e0e7e87 | 15:45 |
qi-bot | [commit] Maarten ter Huurne: More header cleanups. (master) http://qi-hw.com/p/gmenu2x/a01d892 | 15:45 |
qi-bot | [commit] Maarten ter Huurne: utilities: Removed unused functions. (master) http://qi-hw.com/p/gmenu2x/40c510a | 15:45 |
qi-bot | [commit] Maarten ter Huurne: utilities: Replace min/max functions by the versions from STL. (master) http://qi-hw.com/p/gmenu2x/aea1c44 | 15:45 |
qi-bot | [commit] Maarten ter Huurne: Minimized gmenu2x.h. (master) http://qi-hw.com/p/gmenu2x/f28e4f6 | 15:45 |
qi-bot | [commit] Maarten ter Huurne: gmenu2x.cpp: Re-ordered includes. (master) http://qi-hw.com/p/gmenu2x/cf8ebbc | 15:45 |
qi-bot | [commit] Werner Almesberger: labsw/ch12.sch: added BJT and diode current (master) http://qi-hw.com/p/wernermisc/db53a18 | 00:45 |
---|---|---|
qi-bot | [commit] Werner Almesberger: labsw/BOM: almost complete BOM (master) http://qi-hw.com/p/wernermisc/adb8d40 | 00:45 |
qi-bot | [commit] Xiangfu Liu: nanonote-files: compile-openwrt-xburst.sh: fix the kernel.config path (master) http://qi-hw.com/p/openwrt-packages/9e7c727 | 08:08 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: new package: signalgen(@BROKEN): generates relatively low frequency signals with the use of a PC sound card (master) http://qi-hw.com/p/openwrt-packages/66b4a47 | 08:08 |
qi-bot | [commit] Xiangfu Liu: new package: signalgen python version (master) http://qi-hw.com/p/openwrt-packages/0fe5add | 08:08 |
qi-bot | [commit] Xiangfu Liu: nanonote-files: update feeds.conf for next release (master) http://qi-hw.com/p/openwrt-packages/fe24c6b | 03:17 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: makfa: add makfa.dump to files. not generate every build (master) http://qi-hw.com/p/openwrt-packages/bf77201 | 07:43 |
qi-bot | [commit] Xiangfu Liu: new pakcage: csound (BROKEN) (master) http://qi-hw.com/p/openwrt-packages/f500fb2 | 00:59 |
---|
qi-bot | [commit] Xiangfu Liu: config.full_system: add recently new packages (master) http://qi-hw.com/p/openwrt-packages/e75b38e | 08:12 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: config.full_system: sort all sections (master) http://qi-hw.com/p/openwrt-packages/3d86754 | 08:12 |
qi-bot | [commit] Xiangfu Liu: optimize for ben nanonote (master) http://qi-hw.com/p/openwrt-xburst/42cfc61 | 10:37 |
qi-bot | [commit] Xiangfu Liu: [xburst] Improve mounttime (master) http://qi-hw.com/p/openwrt-xburst/c389527 | 10:37 |
qi-bot | [commit] Xiangfu Liu: nanonote optimize (master) http://qi-hw.com/p/openwrt-xburst/03f9977 | 10:37 |
qi-bot | [commit] kyak: add kernel patch for setfont2 (master) http://qi-hw.com/p/openwrt-xburst/b5a9c9a | 10:37 |
qi-bot | [commit] Xiangfu Liu: optimize for ben nanonote (master) http://qi-hw.com/p/openwrt-xburst/b274721 | 10:37 |
qi-bot | [commit] kyak: config-2.6.37: enable battery, disable RNDIS (master) http://qi-hw.com/p/openwrt-xburst/948a9cc | 10:37 |
qi-bot | [commit] kyak: patches-2.6.37: support for Ben NAND partitioning (master) http://qi-hw.com/p/openwrt-xburst/1fdde47 | 10:37 |
qi-bot | [commit] David Kühling: linux kernel: add CONFIG_PROC_PAGE_MONITOR=y to allow for clean user-space DMA (master) http://qi-hw.com/p/openwrt-xburst/9048c19 | 10:37 |
qi-bot | [commit] kyak: config-2.6.37: enable options needed for keymouse (master) http://qi-hw.com/p/openwrt-xburst/252345f | 10:37 |
qi-bot | [commit] kyak: trunk: fix kernel keymap for VolUp/Down and Del (master) http://qi-hw.com/p/openwrt-xburst/75e7b56 | 10:37 |
qi-bot | [commit] kyak: trunk: build sound modules in kernel (master) http://qi-hw.com/p/openwrt-xburst/2d62caf | 10:37 |
qi-bot | [commit] kyak: trunk: add ks7010 support patch (master) http://qi-hw.com/p/openwrt-xburst/cd6e232 | 10:37 |
qi-bot | [commit] Xiangfu Liu: base-files, move it to openwrt-package/nanonote-files (master) http://qi-hw.com/p/openwrt-xburst/0eb17f7 | 10:37 |
qi-bot | [commit] kyak: Disable syslogd and klogd (master) http://qi-hw.com/p/openwrt-xburst/0e98cca | 10:37 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: update to 2010.06 (master) http://qi-hw.com/p/openwrt-xburst/67e619e | 10:37 |
qi-bot | [commit] kyak: busybox: backport reverse history search patch (master) http://qi-hw.com/p/openwrt-xburst/f718120 | 10:37 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: enable-silent-console.patch (master) http://qi-hw.com/p/openwrt-xburst/e956c56 | 10:37 |
qi-bot | [commit] Xiangfu Liu: uboot silent console (master) http://qi-hw.com/p/openwrt-xburst/e64b1c6 | 10:37 |
qi-bot | [commit] Xiangfu Liu: ben nanonote: forward patches to linux-3.0 (master) http://qi-hw.com/p/openwrt-xburst/bfd4625 | 10:37 |
qi-bot | [commit] kyak: kernel-3.0: add fbcon color fonts patch (master) http://qi-hw.com/p/openwrt-xburst/87387eb | 10:37 |
qi-bot | [commit] Xiangfu Liu: new package: listener automatically records when sound is detected (master) http://qi-hw.com/p/openwrt-packages/f3d79bd | 02:36 |
---|
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/2/collda: oops, only look for collateral damage on standby.fpg (master) http://qi-hw.com/p/wernermisc/cb024e1 | 09:09 |
---|---|---|
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/2/dumplock: dump NOR locks (untested) (master) http://qi-hw.com/p/wernermisc/e0f8fc0 | 09:09 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/2/dumplock: use correct offset; fixed block number counting (master) http://qi-hw.com/p/wernermisc/a6136bd | 09:24 |
qi-bot | [commit] Xiangfu Liu: new package: Taskwarrior is a command-line todo list manager (master) http://qi-hw.com/p/openwrt-packages/461384d | 12:45 |
qi-bot | [commit] Xiangfu Liu: taskwarrior: update DEPENDS and description (master) http://qi-hw.com/p/openwrt-packages/1aed30c | 12:53 |
qi-bot | [commit] Xiangfu Liu: taskwarrior: rename package name to taskwarrior (master) http://qi-hw.com/p/openwrt-packages/3fd7a4a | 13:06 |
qi-bot | [commit] Xiangfu Liu: gtypist: fix typo in DEPENDS (master) http://qi-hw.com/p/openwrt-packages/ecb69c7 | 13:21 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/2/dumpotp: quick and dirty script to dump the OTP memory (master) http://qi-hw.com/p/wernermisc/97af8ea | 14:47 |
qi-bot | [commit] Xiangfu Liu: new package: gtypist a universal typing tutor (master) http://qi-hw.com/p/openwrt-packages/d7402ee | 02:47 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: config.full_system: include kbd-console-maps (master) http://qi-hw.com/p/openwrt-packages/ca0b3b5 | 03:26 |
qi-bot | [commit] Xiangfu Liu: frotz: remove license problem games (master) http://qi-hw.com/p/openwrt-packages/b013154 | 09:10 |
qi-bot | [commit] Xiangfu Liu: some BROKEN packages, maybe somebody can continue work on those package (master) http://qi-hw.com/p/openwrt-packages/3e5e716 | 13:22 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/2/collda: corrected $n to be the number of standby failures (master) http://qi-hw.com/p/wernermisc/86e86dc | 14:09 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/2/plot-cdf: start empirical distribution at (0, 0) (master) http://qi-hw.com/p/wernermisc/9b2f2d1 | 14:09 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/2/aloop: lock the NOR again after restoring standby (master) http://qi-hw.com/p/wernermisc/88bf6b7 | 14:09 |
qi-bot | [commit] Xiangfu Liu: new package: SDL-widgets: a GUI toolkit on top of the SDL libraries (master) http://qi-hw.com/p/openwrt-packages/1b3135c | 14:54 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/2/plot-cdf: added option -i to interpolate empirical results (master) http://qi-hw.com/p/wernermisc/13479e1 | 12:51 |
---|---|---|
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/2/plot-corr: make scatter plot of time between corruptions (master) http://qi-hw.com/p/wernermisc/bb25893 | 12:51 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/2/Makefile (list): remove the -stat suffix (master) http://qi-hw.com/p/wernermisc/ffe45cb | 12:51 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/2/Makefile: target "tar" to collect raw data files needed for further analysis (master) http://qi-hw.com/p/wernermisc/1c331b3 | 12:51 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/2/plot-corr: options -n and -i to set samples and interval (master) http://qi-hw.com/p/wernermisc/36b52a9 | 12:51 |
qi-bot | [commit] Xiangfu Liu: frotz: add 4 zcode games (master) http://qi-hw.com/p/openwrt-packages/f5a7f94 | 13:26 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/2/upset: take address and value from command-line; report outcome (master) http://qi-hw.com/p/wernermisc/d6e1e8b | 17:43 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/2/plot: analyze console log and plot probability distribution (master) http://qi-hw.com/p/wernermisc/5ac8800 | 16:27 |
---|---|---|
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/2/plot: corrected terminology and presentation of empirical cdf (master) http://qi-hw.com/p/wernermisc/ebc8a1e | 16:27 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/2/plot: renamed to plot-cdf (master) http://qi-hw.com/p/wernermisc/ddd8338 | 16:27 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/2/bcmp: compare bitstreams and highlight differences (master) http://qi-hw.com/p/wernermisc/04e7d11 | 16:27 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/2/collda: report collateral damage in non-standby partitions (master) http://qi-hw.com/p/wernermisc/b012a1a | 16:27 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/2/Makefile: one Makefile to rule them (scripts) all (master) http://qi-hw.com/p/wernermisc/e9bdf5f | 17:42 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/2/collda: cycle of corruption is last good cycle + 1 (master) http://qi-hw.com/p/wernermisc/71495fe | 17:42 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/2/bscmp: show number of corruption as i/n instead of (n) (master) http://qi-hw.com/p/wernermisc/a83a711 | 17:42 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption: moved material of 1st series tests to 1/, 2nd to 2/ (master) http://qi-hw.com/p/wernermisc/5037afb | 01:50 |
---|---|---|
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/1/: distribution data and plot script (master) http://qi-hw.com/p/wernermisc/8b4ef50 | 01:50 |
qi-bot | [commit] Werner Almesberger: m1/perf/sched.c: synchronize with upstream version (master) http://qi-hw.com/p/wernermisc/9e32d56 | 01:50 |
qi-bot | [commit] Werner Almesberger: labsw/Makefile (bom): generate .lst file from eeschema (master) http://qi-hw.com/p/wernermisc/8341574 | 01:50 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/1/loop8: forgot to commit this one (master) http://qi-hw.com/p/wernermisc/f3bfd1f | 01:50 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/1/peekcmp: compate standby dump obtained with "peek" (master) http://qi-hw.com/p/wernermisc/3599e3e | 01:50 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/2/: new loop and tools, with auto-reporting and auto-recovery (master) http://qi-hw.com/p/wernermisc/d433f73 | 02:02 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/2/aloop: corrections and put cycle number at beginning of file name (master) http://qi-hw.com/p/wernermisc/f1ebf74 | 03:59 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/2/upset: deliberately corrupt the NOR (master) http://qi-hw.com/p/wernermisc/7cb9679 | 03:59 |
qi-bot | [commit] Maarten ter Huurne: media: radio: RDA5807: Implemented VIDIOC_QUERYCAP ioctl. (jz-3.0) http://qi-hw.com/p/qi-kernel/a198ec4 | 23:44 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: media: radio: RDA5807: Implemented VIDIOC_G_FREQUENCY ioctl. (jz-3.0) http://qi-hw.com/p/qi-kernel/ed96d8b | 23:44 |
qi-bot | [commit] Maarten ter Huurne: media: radio: RDA5807: Implemented VIDIOC_S_HW_FREQ_SEEK ioctl. (jz-3.0) http://qi-hw.com/p/qi-kernel/6e2603c | 23:44 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/: infrastructure and test script for temperature measurements (master) http://qi-hw.com/p/wernermisc/8741616 | 22:26 |
---|---|---|
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/mtemp: so Ubuntu now has a usbtmc module that gets in the way. rmmod :) (master) http://qi-hw.com/p/wernermisc/84b2d41 | 22:43 |
qi-bot | [commit] Maarten ter Huurne: media: radio: RDA5807: Configure inputs and outputs using platform data. (jz-3.0) http://qi-hw.com/p/qi-kernel/9034541 | 09:11 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: media: radio: RDA5807: Print fatal problems using dev_err instead of dev_warn. (jz-3.0) http://qi-hw.com/p/qi-kernel/26e4716 | 09:11 |
qi-bot | [commit] Maarten ter Huurne: MIPS: A320: Specify platform data for RDA5807. (jz-3.0) http://qi-hw.com/p/qi-kernel/40201cd | 09:11 |
qi-bot | [commit] Maarten ter Huurne: media: radio: RDA5807: Implemented suspend and resume. (jz-3.0) http://qi-hw.com/p/qi-kernel/85dd159 | 10:11 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: media: radio: RDA5807: Re-tune on enable. (jz-3.0) http://qi-hw.com/p/qi-kernel/cc18a5b | 10:11 |
qi-bot | [commit] Werner Almesberger: ubb-usb/: concept drawing of simple UBB-USB hardware (master) http://qi-hw.com/p/ben-blinkenlights/540f224 | 15:49 |
qi-bot | [commit] Werner Almesberger: ubb-usb/Makefile: added PDF generation (master) http://qi-hw.com/p/ben-blinkenlights/bdd95bd | 15:49 |
qi-bot | [commit] Werner Almesberger: ubb-usb/pin-change.fig: illustration of how to change multiple pins with a single write (master) http://qi-hw.com/p/ben-blinkenlights/f8185f4 | 23:41 |
qi-bot | [commit] Werner Almesberger: ircstat/stat: don't plot the last (partial) month (master) http://qi-hw.com/p/wernermisc/36f8bf1 | 16:44 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ircstat/ML: traffic of the mailing lists (manually collected) (master) http://qi-hw.com/p/wernermisc/113fc5c | 16:44 |
qi-bot | [commit] Werner Almesberger: m1/button/: milling process for making M1 buttons from a piece of wood (master) http://qi-hw.com/p/wernermisc/70e88c5 | 20:54 |
qi-bot | [commit] Maarten ter Huurne: media: radio: RDA5807: Added driver. (jz-3.0) http://qi-hw.com/p/qi-kernel/6f400ef | 16:38 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: MIPS: A320: Enabled RDA5807 support. (jz-3.0) http://qi-hw.com/p/qi-kernel/fe72b55 | 16:38 |
qi-bot | [commit] Maarten ter Huurne: media: radio: RDA5807: Mute at startup; power down when muted. (jz-3.0) http://qi-hw.com/p/qi-kernel/144e9c2 | 22:43 |
qi-bot | [commit] Maarten ter Huurne: media: radio: RDA5807: RSSI is 7 bits wide. (jz-3.0) http://qi-hw.com/p/qi-kernel/73abbd7 | 22:43 |
qi-bot | [commit] Werner Almesberger: schhist/schhist2web: > was missing in IMG tag for unchanged.png (vertical bar) (master) http://qi-hw.com/p/eda-tools/41a65ca | 12:50 |
---|
qi-bot | [commit] Werner Almesberger: labsw/: redesigned rear connections to pair in/out by "near" potential (master) http://qi-hw.com/p/wernermisc/9ffb0c8 | 06:12 |
---|---|---|
qi-bot | [commit] Werner Almesberger: labsw/: re-layout for the various design changes (including potential separation) (master) http://qi-hw.com/p/wernermisc/7bc6c89 | 06:12 |
qi-bot | [commit] Werner Almesberger: labsw/: added partially populated DIP6 sockets since DIP4 is hard to source (master) http://qi-hw.com/p/wernermisc/162db38 | 09:55 |
qi-bot | [commit] Werner Almesberger: labsw/labsw.brd: tightened some traces (master) http://qi-hw.com/p/wernermisc/a124f1b | 09:55 |
qi-bot | [commit] Werner Almesberger: README: mention also fab/ and mlztx/ (master) http://qi-hw.com/p/eda-tools/eff2e8e | 03:50 |
---|---|---|
qi-bot | [commit] Werner Almesberger: swapcmp/: swap (rename) components in a layout (master) http://qi-hw.com/p/eda-tools/886de15 | 03:51 |
qi-bot | [commit] Maarten ter Huurne: MIPS: A320: defconfig: Disable "msdos" file system. (jz-3.0) http://qi-hw.com/p/qi-kernel/7c37eec | 00:23 |
---|
qi-bot | [commit] Werner Almesberger: m1/perf/eval.pl: warn if an instruction reads and writes from the same register (master) http://qi-hw.com/p/wernermisc/5bf9ae0 | 20:27 |
---|---|---|
qi-bot | [commit] Werner Almesberger: m1/perf/sched.c: use calloc instead of malloc plus memset (master) http://qi-hw.com/p/wernermisc/0a7e5b1 | 20:27 |
qi-bot | [commit] Werner Almesberger: m1/perf/sched.c: return -1 if malloc fails (master) http://qi-hw.com/p/wernermisc/24a9b85 | 20:27 |
qi-bot | [commit] Werner Almesberger: m1/perf/sched.c: code cleanup (no functional changes) (master) http://qi-hw.com/p/wernermisc/35e9903 | 20:27 |
qi-bot | [commit] Werner Almesberger: m1/perf/sched.c: overlook compiler warnings at your own peril, grrr ... (master) http://qi-hw.com/p/wernermisc/a0abd4e | 09:01 |
---|---|---|
qi-bot | [commit] Stefan Schmidt: ieee802154/at86rf230.h: Fix register names for RX_AACK_ON and TX_ARET_ON (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/43adc11 | 10:02 |
qi-bot | [commit] Stefan Schmidt: ieee802154/at86rf230.c: Prepare driver for auto ACK support (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/d8f39e8 | 10:02 |
qi-bot | [commit] Werner Almesberger: atusb driver for extended mode (untested and unfinished ) (ben-wpan) http://qi-hw.com/p/qi-kernel/815a0e3 | 19:12 |
qi-bot | [commit] Stefan Schmidt: ieee802154/at86rf230: Add Automatic retransmit form the extended mode (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/54634de | 19:59 |
qi-bot | [commit] Werner Almesberger: m1/perf/sched.c: don't try to unblock references of next setter twice (more) (master) http://qi-hw.com/p/wernermisc/0f80dcf | 01:20 |
---|---|---|
qi-bot | [commit] Werner Almesberger: m1/perf/Makefile: use -fno-builtin, use profiling libc, set -DPRINTF_FLOAT (master) http://qi-hw.com/p/wernermisc/e2c133e | 01:20 |
qi-bot | [commit] Werner Almesberger: m1/perf/tabular: print total run time at the end (master) http://qi-hw.com/p/wernermisc/af8935f | 01:20 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/LOG: updated with the "endless" run (master) http://qi-hw.com/p/wernermisc/37f2c60 | 01:20 |
qi-bot | [commit] kyak: kernel-3.0: add fbcon color fonts patch (master) http://qi-hw.com/p/openwrt-xburst/c32e1d3 | 08:26 |
qi-bot | [commit] Maarten ter Huurne: MIPS: A320: Do not mark line-in as not connected. (jz-3.0) http://qi-hw.com/p/qi-kernel/cf663bf | 16:05 |
qi-bot | [commit] Werner Almesberger: m1/perf/Makefile: use libfpvm/x86-linux/Makefile (master) http://qi-hw.com/p/wernermisc/b2e2364 | 23:34 |
qi-bot | [commit] Werner Almesberger: m1/perf/sched.c: removed "assert" hack (since we now use regular libc) (master) http://qi-hw.com/p/wernermisc/9db83ae | 23:34 |
qi-bot | [commit] Werner Almesberger: m1/perf/sched.c: tried and rejected more accurate LCPF distance heuristics (master) http://qi-hw.com/p/wernermisc/bb8c1ce | 23:34 |
qi-bot | [commit] Werner Almesberger: m1/perf/sched.c: if register allocation fails, return an error instead of aborting (master) http://qi-hw.com/p/wernermisc/3da0074 | 23:34 |
qi-bot | [commit] Werner Almesberger: m1/perf/favg: tool to extract values from ./tabulate -h and to calculate averages (master) http://qi-hw.com/p/wernermisc/71cdeb8 | 23:35 |
qi-bot | [commit] Werner Almesberger: m1/perf/eval.pl: process both programs (frame and vertex) and dump all assigned-to fixed registers (master) http://qi-hw.com/p/wernermisc/b3796c8 | 06:23 |
---|---|---|
qi-bot | [commit] Werner Almesberger: m1/perf/: calculate effective register allocation and how it in comparison table (master) http://qi-hw.com/p/wernermisc/c5df76a | 06:23 |
qi-bot | [commit] Werner Almesberger: m1/perf/tabulate: added HTML mode with highlighting (-h) (master) http://qi-hw.com/p/wernermisc/69cfc40 | 06:23 |
qi-bot | [commit] Maarten ter Huurne: Backlight: use different sysfs name for NanoNote and Dingoo. (master) http://qi-hw.com/p/gmenu2x/b997485 | 23:50 |
qi-bot | [commit] Maarten ter Huurne: Call deinit() method on exit. (master) http://qi-hw.com/p/gmenu2x/53a73ca | 23:50 |
qi-bot | [commit] Maarten ter Huurne: Corrected name of USB power supply device. (master) http://qi-hw.com/p/gmenu2x/0acbd35 | 23:50 |
qi-bot | [commit] Maarten ter Huurne: Minor cleanup: group handle init code together. (master) http://qi-hw.com/p/gmenu2x/799bb13 | 23:50 |
qi-bot | [commit] Maarten ter Huurne: Minor cleanup: better usage of fscanf. (master) http://qi-hw.com/p/gmenu2x/84ec66c | 23:50 |
qi-bot | [commit] Maarten ter Huurne: Use existing brightness value instead of overriding it. (master) http://qi-hw.com/p/gmenu2x/7a97822 | 23:50 |
qi-bot | [commit] Maarten ter Huurne: Removed per-application brightness setting. (master) http://qi-hw.com/p/gmenu2x/e73a8d0 | 23:50 |
qi-bot | [commit] Werner Almesberger: m1/perf/sched.c: added asserts and list poisoning (master) http://qi-hw.com/p/wernermisc/60cf6f5 | 12:20 |
---|---|---|
qi-bot | [commit] Werner Almesberger: m1/perf/sched.c: fixed compilation with DEBUG enabled (master) http://qi-hw.com/p/wernermisc/e34e8eb | 12:20 |
qi-bot | [commit] Werner Almesberger: m1/perf/sched.c: slight cleanup (no functional changes) (master) http://qi-hw.com/p/wernermisc/1ad7db7 | 12:20 |
qi-bot | [commit] Werner Almesberger: spiio/: simple SPI I/O example (master) http://qi-hw.com/p/wernermisc/05bbe91 | 12:20 |
qi-bot | [commit] Werner Almesberger: m1/perf/sched.c: revamped to handle static registers correctly as well (master) http://qi-hw.com/p/wernermisc/8f82a0e | 21:08 |
qi-bot | [commit] Werner Almesberger: m1/perf/main.c: exit immediately on compilation error (master) http://qi-hw.com/p/wernermisc/a19a196 | 21:08 |
qi-bot | [commit] Werner Almesberger: m1/perf/: "spotless" target that also removes the "main" executable (master) http://qi-hw.com/p/wernermisc/23c7bd6 | 21:08 |
qi-bot | [commit] Werner Almesberger: m1/perf/sched.c (foreach): improved type safety (master) http://qi-hw.com/p/wernermisc/b177acd | 21:08 |
qi-bot | [commit] Werner Almesberger: m1/perf/sched.c: light code cleanup (master) http://qi-hw.com/p/wernermisc/e98f08e | 21:08 |
qi-bot | [commit] Werner Almesberger: m1/perf/sched.c (schedule): reduced conditionally compiled code size for optimizer (master) http://qi-hw.com/p/wernermisc/2bc4c33 | 21:08 |
qi-bot | [commit] Werner Almesberger: m1/perf/try: disable profiling (master) http://qi-hw.com/p/wernermisc/403917a | 21:08 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/LOG: push results of on-going testing (master) http://qi-hw.com/p/wernermisc/7567c4f | 21:08 |
qi-bot | [commit] Xiangfu Liu: config.full_system: remvoe kmod-xfs, remove stardict from image (master) http://qi-hw.com/p/openwrt-packages/f04ea68 | 03:10 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: zimread update to r362, enable build (master) http://qi-hw.com/p/openwrt-packages/fe60208 | 06:30 |
qi-bot | [commit] Maarten ter Huurne: Removed one last occurrence of hardcoded minimum CPU frequency. (master) http://qi-hw.com/p/gmenu2x/8d04cf1 | 14:25 |
qi-bot | [commit] Maarten ter Huurne: Do not constrain the max CPU frequency for apps on setting the string value. (master) http://qi-hw.com/p/gmenu2x/8bcd039 | 14:25 |
qi-bot | [commit] Lars-Peter Clausen: mfd: Use generic irq chip for jz4740-adc (jz-3.0) http://qi-hw.com/p/qi-kernel/7d98bd6 | 14:28 |
qi-bot | [commit] Lars-Peter Clausen: mfd: jz4740-adc: Fix generic irq chip ack function name. (jz-3.0) http://qi-hw.com/p/qi-kernel/61390f3 | 14:28 |
qi-bot | [commit] Lars-Peter Clausen: mfd: jz4740-adc: Make jz4740_adc_driver static (jz-3.0) http://qi-hw.com/p/qi-kernel/9105a59 | 14:28 |
qi-bot | [commit] Maarten ter Huurne: Corrected capitalization of megahertz. (master) http://qi-hw.com/p/gmenu2x/03ea679 | 14:29 |
qi-bot | [commit] Maarten ter Huurne: Fixed mistake in 8bcd03962f2fb1c6166eebd280b6648d3387eac8. (master) http://qi-hw.com/p/gmenu2x/6729e30 | 14:45 |
qi-bot | [commit] Ayla: The contextual menu now features a "show manual" entry. (master) http://qi-hw.com/p/gmenu2x/5f69930 | 01:42 |
---|---|---|
qi-bot | [commit] Ayla: Disactivate the binding of the app's manual on the 'Y' button. (master) http://qi-hw.com/p/gmenu2x/6ac0123 | 01:42 |
qi-bot | [commit] Ayla: The ButtonBox now features a clear() function which empties the list of buttons. (master) http://qi-hw.com/p/gmenu2x/fdee206 | 01:42 |
qi-bot | [commit] Ayla: Rewrite of how the events are handled by the menusetting* objects. (master) http://qi-hw.com/p/gmenu2x/7f2c7db | 01:42 |
qi-bot | [commit] Ayla: Rewrite of the MenuSettingRGBA class so that it won't use the CLEAR/MENU buttons. (master) http://qi-hw.com/p/gmenu2x/d82e262 | 01:42 |
qi-bot | [commit] Ayla: The WallpaperDialog object now uses a ButtonBox to print the key mapping at the bottom of the screen. (master) http://qi-hw.com/p/gmenu2x/c9a51af | 01:42 |
qi-bot | [commit] Ayla: The (gp2x) A button is now used instead of X to clear string inputs (like link names). (master) http://qi-hw.com/p/gmenu2x/1aac93f | 01:42 |
qi-bot | [commit] Ayla: Modified the button icons displayed when modifying an integer parameter. (master) http://qi-hw.com/p/gmenu2x/87106cd | 01:42 |
qi-bot | [commit] Ayla: Modified the key shortcuts of the text input dialog, so that the X and Y keys are not used. (master) http://qi-hw.com/p/gmenu2x/b5131c1 | 01:42 |
qi-bot | [commit] Ayla: Modified the key shortcuts of the file input dialog. (master) http://qi-hw.com/p/gmenu2x/5dd6d31 | 01:42 |
qi-bot | [commit] Ayla: Modified the key shortcuts for the text display dialog. (master) http://qi-hw.com/p/gmenu2x/d0cfe7c | 01:42 |
qi-bot | [commit] Ayla: Modified the key shortcuts for the wallpaper dialog. (master) http://qi-hw.com/p/gmenu2x/38cfd32 | 01:42 |
qi-bot | [commit] Ayla: Modified the key shortcuts for the generic file/dir selector class. (master) http://qi-hw.com/p/gmenu2x/826d622 | 01:42 |
qi-bot | [commit] Ayla: Modified the key shortcuts for the small popups (deleting a link...). (master) http://qi-hw.com/p/gmenu2x/16b050b | 01:42 |
qi-bot | [commit] Ayla: The files "a.png" and "b.png" have been renamed to "cancel.png" and "accept.png". (master) http://qi-hw.com/p/gmenu2x/759eefd | 01:42 |
qi-bot | [commit] Ayla: The platform-specific files should be the last one installed. (master) http://qi-hw.com/p/gmenu2x/6ec7fa1 | 01:57 |
qi-bot | [commit] Ayla: Dingux port: swap the "accept" and "cancel" button icons. (master) http://qi-hw.com/p/gmenu2x/6586ea3 | 01:57 |
qi-bot | [commit] Werner Almesberger: m1/perf/: main.c was missing. Added on-going work. (master) http://qi-hw.com/p/wernermisc/9a5a22e | 04:30 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/LOG: got a multiple hit (master) http://qi-hw.com/p/wernermisc/a80b77d | 04:30 |
qi-bot | [commit] Werner Almesberger: labsw/: made column cavities 0.2 mm wider on each side (master) http://qi-hw.com/p/wernermisc/3155880 | 04:30 |
qi-bot | [commit] Werner Almesberger: m1/perf/: scheduler cleanup; output comparison tool (master) http://qi-hw.com/p/wernermisc/64e2a3c | 04:30 |
qi-bot | [commit] Werner Almesberger: m1/perf/: cleaned up sched.c a little; added TODO (master) http://qi-hw.com/p/wernermisc/c009a13 | 04:30 |
qi-bot | [commit] Werner Almesberger: m1/perf/: allocate scheduler context (about 0.5 MB) dynamically (master) http://qi-hw.com/p/wernermisc/b4abaff | 09:19 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/: got a quick one (master) http://qi-hw.com/p/wernermisc/a66c957 | 09:19 |
qi-bot | [commit] Werner Almesberger: m1/perf/: added instrumentation for monitoring register allocation (master) http://qi-hw.com/p/wernermisc/abd7de7 | 11:08 |
qi-bot | [commit] Werner Almesberger: m1/perf/: added LCPF scheduler (master) http://qi-hw.com/p/wernermisc/5dc1c6d | 11:08 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/LOG: yet another corruption ! (master) http://qi-hw.com/p/wernermisc/065ad19 | 11:08 |
qi-bot | [commit] Ayla: Dingux port: The SD card root is now hardcoded to /boot for the getDiskFree() function only. (master) http://qi-hw.com/p/gmenu2x/cca3677 | 11:21 |
qi-bot | [commit] Ayla: Added debug message which is displayed when surfaces are deleted from memory. (master) http://qi-hw.com/p/gmenu2x/cf8bd84 | 11:21 |
qi-bot | [commit] Ayla: When deleting a link, check if the icon is used elsewhere before unloading it. (master) http://qi-hw.com/p/gmenu2x/3995133 | 11:21 |
qi-bot | [commit] Werner Almesberger: m1/perf/: a bunch of bug fixes all over the place (master) http://qi-hw.com/p/wernermisc/c02c029 | 15:36 |
qi-bot | [commit] Werner Almesberger: m1/perf/: scripts for bulk test runs and tabulating the results (master) http://qi-hw.com/p/wernermisc/3727324 | 15:36 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/: productive day - yet another corruption (master) http://qi-hw.com/p/wernermisc/4c9ff64 | 15:36 |
qi-bot | [commit] Werner Almesberger: m1/perf/tabulate: some small improvements and corrections (master) http://qi-hw.com/p/wernermisc/16b4a9a | 15:36 |
qi-bot | [commit] Maarten ter Huurne: Improved CPU frequency control. (master) http://qi-hw.com/p/gmenu2x/d354eb8 | 16:30 |
qi-bot | [commit] Maarten ter Huurne: Use 16 bpp by default on the Dingoo. (master) http://qi-hw.com/p/gmenu2x/41650aa | 16:40 |
qi-bot | [commit] Ayla: Dingux port: added a description for the "power off" link. (master) http://qi-hw.com/p/gmenu2x/1f18d73 | 17:33 |
qi-bot | [commit] Ayla: Dingux port: added a link to reboot the system. (master) http://qi-hw.com/p/gmenu2x/f39e87f | 17:33 |
qi-bot | [commit] Maarten ter Huurne: Work around lack of vsynced page flipping in OpenDingux kernel. (master) http://qi-hw.com/p/gmenu2x/4df6def | 19:10 |
qi-bot | [commit] Ayla: Dingux port: added a description for the "power off" link. (master) http://qi-hw.com/p/gmenu2x/94cac92 | 19:10 |
qi-bot | [commit] Ayla: Dingux port: added a link to reboot the system. (master) http://qi-hw.com/p/gmenu2x/f7b9493 | 19:10 |
qi-bot | [commit] Maarten ter Huurne: Merge branch 'master' of projects.qi-hardware.com:gmenu2x (master) http://qi-hw.com/p/gmenu2x/dcb08a8 | 19:10 |
qi-bot | [commit] Maarten ter Huurne: Work around lack of vsynced page flipping in OpenDingux kernel. (master) http://qi-hw.com/p/gmenu2x/19064b4 | 19:14 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: SLCD: Enable caching on mmap-ed frame buffer. (jz-3.0) http://qi-hw.com/p/qi-kernel/2452f67 | 20:44 |
qi-bot | [commit] Maarten ter Huurne: Put platform specific defaults in systemwide gmenu2x.conf. (master) http://qi-hw.com/p/gmenu2x/a014a33 | 23:09 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/peek: new tool to quickly check for corruption at low addresses (master) http://qi-hw.com/p/wernermisc/0a605c8 | 05:33 |
---|---|---|
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/LOG: latest results (master) http://qi-hw.com/p/wernermisc/a624fbe | 05:33 |
qi-bot | [commit] Werner Almesberger: m1/perf/: build the patch compiler with gcc and with profiling (master) http://qi-hw.com/p/wernermisc/001ca49 | 06:25 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: A320: Fixed double buffering when TV-out is active. (jz-3.0) http://qi-hw.com/p/qi-kernel/a534623 | 16:35 |
qi-bot | [commit] kyak: libassuan: update to 2.0.2, add libgpg-error as a dependency (master) http://qi-hw.com/p/openwrt-packages/b964a40 | 18:01 |
---|
qi-bot | [commit] Werner Almesberger: fped/obj.c (generate_items): handle failure to expand package name gracefully (master) http://qi-hw.com/p/fped/b8f1add | 00:43 |
---|---|---|
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/LOG: finally got one more (master) http://qi-hw.com/p/wernermisc/88fa76b | 07:06 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: enable-silent-console.patch (master) http://qi-hw.com/p/openwrt-xburst/992a7ff | 08:12 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: uboot silent console (master) http://qi-hw.com/p/openwrt-xburst/d5817a0 | 08:12 |
qi-bot | [commit] Xiangfu Liu: ben nanonote: forward patches to linux-3.0 (master) http://qi-hw.com/p/openwrt-xburst/7a4fc34 | 08:12 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/LOG: finally got one more corruption (master) http://qi-hw.com/p/wernermisc/1a2d591 | 04:02 |
---|
qi-bot | [commit] Werner Almesberger: m1/jtag-boot/: added "standby" (by Cristian Paul Penaranda Rojas) (master) http://qi-hw.com/p/wernermisc/cc2b07b | 03:19 |
---|---|---|
qi-bot | [commit] Werner Almesberger: labsw/web/: added visual indication of test loop (master) http://qi-hw.com/p/wernermisc/5085080 | 11:28 |
qi-bot | [commit] Werner Almesberger: labsw/: removed copper from mounting holes (master) http://qi-hw.com/p/wernermisc/5ef4f4a | 23:18 |
qi-bot | [commit] Werner Almesberger: labsw/: corrected size of 2512 footprints (master) http://qi-hw.com/p/wernermisc/a48f34a | 23:18 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/LOG: still trying to reproduce the NOR corruption ... (master) http://qi-hw.com/p/wernermisc/50d66bf | 23:18 |
qi-bot | [commit] Werner Almesberger: fped/gnuplot.c (gnuplot_arc): implemented drawing of arcs (master) http://qi-hw.com/p/fped/6dfbb51 | 23:55 |
qi-bot | [commit] Werner Almesberger: labsw/README: described situation with respect to high voltage (master) http://qi-hw.com/p/wernermisc/b2c8481 | 17:47 |
---|---|---|
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/LOG: latest result (showing failure to reproduce NOR corruption) (master) http://qi-hw.com/p/wernermisc/165d799 | 17:47 |
qi-bot | [commit] Werner Almesberger: labsw/fw/labsw.c: improved debouncing and cleaned up button logic (master) http://qi-hw.com/p/wernermisc/a400f9a | 17:47 |
qi-bot | [commit] Werner Almesberger: labsw/README: all opto headers need wider spacing for high voltage (master) http://qi-hw.com/p/wernermisc/f9c4bb6 | 17:47 |
qi-bot | [commit] Werner Almesberger: labsw/web/: Web-based overview page (master) http://qi-hw.com/p/wernermisc/28cdb89 | 17:50 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/: loop5 test: cut power while in standby (master) http://qi-hw.com/p/wernermisc/db7ae94 | 19:34 |
---|---|---|
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/: update of on-going testing; new test loop7 simulating "false start" (master) http://qi-hw.com/p/wernermisc/2310466 | 19:34 |
qi-bot | [commit] Werner Almesberger: labsw/: power bypassing is now the way SiLabs recommend (master) http://qi-hw.com/p/wernermisc/5d32ade | 23:42 |
qi-bot | [commit] Werner Almesberger: labsw/ changed internal pull-ups to external to remove sneak current path (master) http://qi-hw.com/p/wernermisc/6190dbe | 23:42 |
qi-bot | [commit] Werner Almesberger: labsw/: added low-pass filters to button input (with help from Joerg Reisenweber) (master) http://qi-hw.com/p/wernermisc/bdaff51 | 23:42 |
qi-bot | [commit] Werner Almesberger: labsw/: added hardware revision indication (master) http://qi-hw.com/p/wernermisc/761eae1 | 23:42 |
rjeffries | above average [commit] message | 01:16 |
---|---|---|
rjeffries | <@qi-bot> [commit] Werner Almesberger: m1/jtag-boot/mkboot: eradicate traces of time travel (reported by Michael Walle) (master) http://qi-hw.com/p/wernermisc/47f1328 | 01:16 |
qi-bot | [commit] Xiangfu Liu: update compile-openwrt-xburst.sh (master) http://qi-hw.com/p/openwrt-packages/151364a | 03:27 |
qi-bot | [commit] Werner Almesberger: labsw/LOG: theory that the failures to switch are caused by EMI (on buttons) (master) http://qi-hw.com/p/wernermisc/1152189 | 11:35 |
---|---|---|
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/LOG: added results of last (long) test run (master) http://qi-hw.com/p/wernermisc/b65ca3f | 11:35 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/: next round of tests, just resetting without power-cycling (master) http://qi-hw.com/p/wernermisc/852210c | 22:08 |
qi-bot | [commit] Werner Almesberger: m1/jtag-boot/mkboot: eradicate traces of time travel (reported by Michael Walle) (master) http://qi-hw.com/p/wernermisc/47f1328 | 22:08 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/LOG: NOR corruption not observed without power-cycling (master) http://qi-hw.com/p/wernermisc/2e3553d | 23:08 |
qi-bot | [commit] Werner Almesberger: m1/torture/LOG: activity log (with various build instructions) (master) http://qi-hw.com/p/wernermisc/29677f4 | 07:24 |
---|---|---|
qi-bot | [commit] Werner Almesberger: moved m1/torture/ to more specific m1rc3/norruption/ (master) http://qi-hw.com/p/wernermisc/757f19c | 07:24 |
qi-bot | [commit] Werner Almesberger: labsw/LOG: added more details on occasional labsw malfunction (master) http://qi-hw.com/p/wernermisc/a42bf17 | 07:24 |
qi-bot | [commit] Werner Almesberger: labsw/LOG: reworked power supply bypassing (master) http://qi-hw.com/p/wernermisc/05c52e7 | 12:24 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/loop2: shorter loop (17 s instead of 77 s) that cycles in RTEMS boot, without rendering (master) http://qi-hw.com/p/wernermisc/ed286e6 | 12:24 |
qi-bot | [commit] Werner Almesberger: labsw/LOG: more details on misbehaviour (master) http://qi-hw.com/p/wernermisc/09ac71f | 12:24 |
qi-bot | [commit] Werner Almesberger: m1rc3/norruption/LOG: cycling in RTEMS boot is sufficient to trigger corruption (master) http://qi-hw.com/p/wernermisc/37df000 | 12:24 |
qi-bot | [commit] Werner Almesberger: labsw/mech/Makefile: updated board location for #2 face plate run (master) http://qi-hw.com/p/wernermisc/d39fbee | 07:22 |
---|---|---|
qi-bot | [commit] Werner Almesberger: labsw/mech/front.fpd: reduced width from 104 to 103.6 mm, LED hole from 6.9 to 6.2 mm (master) http://qi-hw.com/p/wernermisc/1717be8 | 07:22 |
qi-bot | [commit] Werner Almesberger: labsw/fw/: make loop use all front panel elements; set CH1/2 opto to open-drain (master) http://qi-hw.com/p/wernermisc/149be29 | 07:22 |
qi-bot | [commit] Werner Almesberger: labsw/LOG: updated with latest results (master) http://qi-hw.com/p/wernermisc/f595b71 | 07:22 |
qi-bot | [commit] Werner Almesberger: labsw/BOOKSHELF: added the BAS16WT flyback diode (master) http://qi-hw.com/p/wernermisc/c90fa3b | 07:22 |
qi-bot | [commit] Werner Almesberger: labsw/fw/: added EP0 commands; main loop now toggles (master) http://qi-hw.com/p/wernermisc/c4b1dd4 | 07:22 |
qi-bot | [commit] Werner Almesberger: labsw/tool/: basic labsw control utility (master) http://qi-hw.com/p/wernermisc/e98ea2b | 07:22 |
qi-bot | [commit] Xiangfu Liu: nanonote-files: config.full_system add recently new packages tig, txt2tags (master) http://qi-hw.com/p/openwrt-packages/c8dae9e | 13:11 |
qi-bot | [commit] Xiangfu Liu: nanonote-files: feeds.conf: update to release revision (release_2011-08-27) http://qi-hw.com/p/openwrt-packages/9432ee8 | 13:20 |
qi-bot | [commit] Xiangfu Liu: data: nanonote: links: add download-dir (master) http://qi-hw.com/p/gmenu2x/17bb938 | 14:05 |
qi-bot | [commit] Werner Almesberger: m1/jtag-boot/: quick hack to boot an M1 with the "regular" bitstream (from NOR) (master) http://qi-hw.com/p/wernermisc/87aa1e7 | 14:37 |
qi-bot | [commit] Werner Almesberger: m1/jtag-boot/boot.bit: removed generated file, oops (master) http://qi-hw.com/p/wernermisc/2ef6c7e | 14:39 |
qi-bot | [commit] Xiangfu Liu: nanonote-files mtd.nn silent u-boot (master) http://qi-hw.com/p/openwrt-packages/5b8344f | 14:41 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: enable-silent-console.patch (master) http://qi-hw.com/p/openwrt-xburst/2e876ca | 14:45 |
qi-bot | [commit] Xiangfu Liu: uboot silent console (master) http://qi-hw.com/p/openwrt-xburst/6e89505 | 14:45 |
qi-bot | [commit] Werner Almesberger: m1/jtag-boot/Makefile: run UrJTAG in quiet mode (master) http://qi-hw.com/p/wernermisc/2c896d8 | 15:10 |
qi-bot | [commit] Werner Almesberger: m1/torture/: quick and dirty power-cycling test loop (master) http://qi-hw.com/p/wernermisc/96a5dd3 | 15:10 |
qi-bot | [commit] Werner Almesberger: m1/jtag-boot/mkboot: added comments with pointers to information sources (master) http://qi-hw.com/p/wernermisc/f3b2894 | 15:30 |
qi-bot | [commit] Werner Almesberger: m1/jtag-boot/: moved explanation from mkboot to README and added more details (master) http://qi-hw.com/p/wernermisc/bcd12fe | 21:55 |
qi-bot | [commit] Werner Almesberger: labsw/LOG: labsw occasionally doesn't do what it's told; described remedies (master) http://qi-hw.com/p/wernermisc/17ec8fa | 23:34 |
qi-bot | [commit] Werner Almesberger: labsw/mech/Makefile: increased engraving depth from 0.2 mm to 0.5 mm (master) http://qi-hw.com/p/wernermisc/fd6b95d | 01:26 |
---|---|---|
qi-bot | [commit] Werner Almesberger: labsw/mech/font.fpd: increased banana jack hole from 6 mm to 8 mm (master) http://qi-hw.com/p/wernermisc/1d4b89e | 01:26 |
qi-bot | [commit] Werner Almesberger: cameo/: new gnuplot tag #%id= with generator-assigned identifier (master) http://qi-hw.com/p/cae-tools/a42a18f | 08:54 |
qi-bot | [commit] Werner Almesberger: cameo/shape.c: removed global "path" variable (where did that madness come from ?) (master) http://qi-hw.com/p/cae-tools/a67d0b4 | 08:54 |
qi-bot | [commit] Werner Almesberger: labsw/LOG: added front plate milling results (master) http://qi-hw.com/p/wernermisc/e67eab1 | 08:54 |
qi-bot | [commit] Werner Almesberger: mech/doit: store cameo job in temporary file, for easier debugging (master) http://qi-hw.com/p/wernermisc/96cd3dd | 08:54 |
qi-bot | [commit] Werner Almesberger: mech/front.fpd: increased banana jack hole diameter from 8.0 mm to 8.1 mm (master) http://qi-hw.com/p/wernermisc/d0309ad | 08:54 |
qi-bot | [commit] Werner Almesberger: cameo/path.c (path_replace): free the old ID (master) http://qi-hw.com/p/cae-tools/828763b | 11:12 |
qi-bot | [commit] Werner Almesberger: cameo/: make tool_comp_paths output paths in the order processed (master) http://qi-hw.com/p/cae-tools/639b0fa | 11:12 |
qi-bot | [commit] Werner Almesberger: labsw/mech/Makefile: fixed error handling of pipes; target "pos" for positioning (master) http://qi-hw.com/p/wernermisc/3dc74fc | 11:12 |
qi-bot | [commit] Jiri Brozovsky: Txt2tags text to LaTeX/HTML/Lout/Man/Wiki/.. converter. (master) http://qi-hw.com/p/openwrt-packages/d8fa139 | 20:16 |
qi-bot | [commit] Ayla: The conf file does not need to be saved on exit. (master) http://qi-hw.com/p/gmenu2x/9768a74 | 00:36 |
---|---|---|
qi-bot | [commit] Ayla: Dingoo port: The help menu now displays help for dingoo's controls. (master) http://qi-hw.com/p/gmenu2x/03a26a8 | 01:20 |
qi-bot | [commit] Werner Almesberger: fw/common/Makefile.common (clean, spotless): allow overloading (with ::) (master) http://qi-hw.com/p/f32xbase/f1f9009 | 15:32 |
qi-bot | [commit] Werner Almesberger: logo/qi-hw.fig: with Allin Kahrl's dimensions and a 2 units keep out area (master) http://qi-hw.com/p/wernermisc/d92a53c | 15:36 |
qi-bot | [commit] Werner Almesberger: labsw/fw/Makefile: remove io-parts.h on clean; improved dependencies of io-parts.h (master) http://qi-hw.com/p/wernermisc/1121b71 | 15:36 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: GPIO: Use new name for generic ack function. (jz-3.0) http://qi-hw.com/p/qi-kernel/678a00e | 15:48 |
qi-bot | [commit] Werner Almesberger: fped.c: cleaned up batch mode selection; batch modes are now mutually exclusive (master) http://qi-hw.com/p/fped/6ca5c22 | 23:36 |
qi-bot | [commit] Werner Almesberger: fped/: added gnuplot output for line/rect/circle with -g (experimental) (master) http://qi-hw.com/p/fped/e5d8fd8 | 23:36 |
qi-bot | [commit] Werner Almesberger: labsw/mech/front.fpd: updated logo geometry (master) http://qi-hw.com/p/wernermisc/2be0548 | 23:36 |
qi-bot | [commit] Werner Almesberger: labsw/mech/: added process to mill front plate (master) http://qi-hw.com/p/wernermisc/596fe88 | 23:36 |
qi-bot | [commit] Werner Almesberger: labsw/mech/Makefile: oops, it's mill.rml, not mill.tmp (master) http://qi-hw.com/p/wernermisc/0dd3964 | 23:51 |
qi-bot | [commit] Werner Almesberger: labsw/: made trace connecting the relays to 5V look less accidental (master) http://qi-hw.com/p/wernermisc/d8d3727 | 09:31 |
---|---|---|
qi-bot | [commit] Werner Almesberger: labsw/: changed hole in DIP from 0.5 mm to 0.8 mm, ratio from 2.5 to 2 (master) http://qi-hw.com/p/wernermisc/2a08a7d | 09:31 |
qi-bot | [commit] Werner Almesberger: labsw/: changed resistors for opto-coupler LEDs from 180 to 150 Ohm (master) http://qi-hw.com/p/wernermisc/14f70fd | 09:31 |
qi-bot | [commit] Werner Almesberger: labsw/sw/: basic firmware - just enumerates (master) http://qi-hw.com/p/wernermisc/e73383b | 09:31 |
qi-bot | [commit] Werner Almesberger: labsw/fw/: added simple button -> LED / relay change loop (master) http://qi-hw.com/p/wernermisc/5649c89 | 15:45 |
qi-bot | [commit] Werner Almesberger: labsw/labsw.sch: label "IN_1" was in italics - changed to normal (master) http://qi-hw.com/p/wernermisc/513f3f8 | 15:45 |
qi-bot | [commit] Werner Almesberger: labsw/LOG: log of development (master) http://qi-hw.com/p/wernermisc/cc65307 | 15:45 |
qi-bot | [commit] Werner Almesberger: mkmk-simple: exit with an error code if "cameo" fails (master) http://qi-hw.com/p/cae-tools/54101ea | 00:32 |
---|---|---|
qi-bot | [commit] Werner Almesberger: cameo/: added option "any" to "mill", to accept paths irrespective of tool size (master) http://qi-hw.com/p/cae-tools/75c3a7d | 00:32 |
qi-bot | [commit] Werner Almesberger: mkmk-simple: added variable ANY (usage: ANY=any) to set "mill any" (master) http://qi-hw.com/p/cae-tools/afa7460 | 00:32 |
qi-bot | [commit] Werner Almesberger: gp2rml/: copied over from svn.openmoko.org/developers/werner/cncmap/gp2rml (master) http://qi-hw.com/p/cae-tools/fbbe451 | 06:39 |
qi-bot | [commit] Werner Almesberger: mkmk-simple: changed path to gp2rml from ...openmoko... to ...qi/cae-tools... (master) http://qi-hw.com/p/cae-tools/50918a2 | 06:39 |
qi-bot | [commit] Werner Almesberger: labsw/: rotate P5 (opto out) (master) http://qi-hw.com/p/wernermisc/8ece4f4 | 07:52 |
qi-bot | [commit] Werner Almesberger: labsw/: changed spacers to have a 4 mm hole, with 0.2 mm of slack (master) http://qi-hw.com/p/wernermisc/a336e1d | 07:52 |
qi-bot | [commit] Werner Almesberger: labsw/cam/Makefile: improved indentation; added BOARD_Z and ANY (master) http://qi-hw.com/p/wernermisc/0d6568c | 07:52 |
qi-bot | [commit] Werner Almesberger: labsw/: reduced depth of "bays" for columns from 11 mm to 10.4 mm (master) http://qi-hw.com/p/wernermisc/ffaef3b | 07:52 |
qi-bot | [commit] Werner Almesberger: labsw/: reduced width of "bays" for columns from 8.4 mm to 8 mm (master) http://qi-hw.com/p/wernermisc/02f7bd9 | 07:52 |
qi-bot | [commit] Jiri Brozovsky: Console viewer for Git repositories (master) http://qi-hw.com/p/openwrt-packages/9745415 | 07:52 |
qi-bot | [commit] Werner Almesberger: labsw/: oops, forgot to commit base.fig (master) http://qi-hw.com/p/wernermisc/2488cc3 | 13:17 |
qi-bot | [commit] Werner Almesberger: renamed labsw/cam/ to labsw/pcb/ (master) http://qi-hw.com/p/wernermisc/90a9453 | 13:17 |
qi-bot | [commit] Werner Almesberger: labsw/me/front.fpd: first CAD version of the front panel (master) http://qi-hw.com/p/wernermisc/b1cd1d4 | 13:17 |
qi-bot | [commit] Werner Almesberger: labsw/: moved base and front Xfig drawings to draft/ (master) http://qi-hw.com/p/wernermisc/e3322a5 | 13:17 |
qi-bot | [commit] Werner Almesberger: labsw/: increased drill hole in 200 mil headers from 1.0 mm to 1.1 mm (master) http://qi-hw.com/p/wernermisc/e9be8ab | 13:26 |
qi-bot | [commit] Werner Almesberger: labsw/: renamed me/ (Mechanical Engineering) to mech/ (master) http://qi-hw.com/p/wernermisc/db7b3c4 | 13:26 |
qi-bot | [commit] Werner Almesberger: labsw/: changed 90 deg front corner to 45 deg; added date, author, etc. text (master) http://qi-hw.com/p/wernermisc/ab89863 | 13:41 |
qi-bot | [commit] Werner Almesberger: gp2rml/gp2rml.c: allow unit of Z clearance (mm) to be specified explictly (master) http://qi-hw.com/p/cae-tools/00166f3 | 15:04 |
qi-bot | [commit] Werner Almesberger: mkmk-simple: new option CLEARANCE (default: 2mm) (master) http://qi-hw.com/p/cae-tools/5651a40 | 15:04 |
qi-bot | [commit] Werner Almesberger: mkmk-simple: exit with an error code if "gp2rml" fails (master) http://qi-hw.com/p/cae-tools/98b0e96 | 15:04 |
qi-bot | [commit] Werner Almesberger: cameo/excellon.c: increased MAX_TOOL from 10 to 20 (master) http://qi-hw.com/p/cae-tools/41bffa8 | 15:04 |
qi-bot | [commit] Werner Almesberger: labsw/pcb/Makefile: increased clearance from 2 mm to 3 mm (master) http://qi-hw.com/p/wernermisc/4137803 | 15:04 |
qi-bot | [commit] Werner Almesberger: cngt/cngt.c (do_key): merge common x/y positioning code (master) http://qi-hw.com/p/cae-tools/daa3554 | 20:54 |
---|---|---|
qi-bot | [commit] Werner Almesberger: cameo/templates/mkmk-simple: added optional BOARD_Z parameter for board thickness (master) http://qi-hw.com/p/cae-tools/6795057 | 20:54 |
qi-bot | [commit] Werner Almesberger: cngt/cngt.c: added positioning-only mode (master) http://qi-hw.com/p/cae-tools/eb8964d | 20:54 |
qi-bot | [commit] Werner Almesberger: cngt/cngt.c: added small steps (default) and long steps (with shift) (master) http://qi-hw.com/p/cae-tools/639d9a2 | 20:54 |
qi-bot | [commit] jow: [package] hostapd: introduce options to configure the logging behaviour. (master) http://qi-hw.com/p/openwrt-xburst/4f0278e | 05:46 |
---|---|---|
qi-bot | [commit] jow: [package] mac80211: configure hostapd logging options (master) http://qi-hw.com/p/openwrt-xburst/3118964 | 05:46 |
qi-bot | [commit] Mirko Vogt: add <http://downloads.qi-hardware.com/software/mirror-openwrt-sources/> (master) http://qi-hw.com/p/openwrt-xburst/d61c52c | 05:46 |
qi-bot | [commit] Xiangfu Liu: optimize for ben nanonote (master) http://qi-hw.com/p/openwrt-xburst/b7816ca | 05:46 |
qi-bot | [commit] Xiangfu Liu: [xburst] Improve mounttime (master) http://qi-hw.com/p/openwrt-xburst/77ddb35 | 05:46 |
qi-bot | [commit] Xiangfu Liu: nanonote optimize (master) http://qi-hw.com/p/openwrt-xburst/a27a35d | 05:46 |
qi-bot | [commit] kyak: add kernel patch for setfont2 (master) http://qi-hw.com/p/openwrt-xburst/9445492 | 05:46 |
qi-bot | [commit] Xiangfu Liu: optimize for ben nanonote (master) http://qi-hw.com/p/openwrt-xburst/27d6c32 | 05:46 |
qi-bot | [commit] kyak: config-2.6.37: enable battery, disable RNDIS (master) http://qi-hw.com/p/openwrt-xburst/276017c | 05:46 |
qi-bot | [commit] kyak: patches-2.6.37: support for Ben NAND partitioning (master) http://qi-hw.com/p/openwrt-xburst/ae3652d | 05:46 |
qi-bot | [commit] David Kühling: linux kernel: add CONFIG_PROC_PAGE_MONITOR=y to allow for clean user-space DMA (master) http://qi-hw.com/p/openwrt-xburst/066831c | 05:46 |
qi-bot | [commit] kyak: config-2.6.37: enable options needed for keymouse (master) http://qi-hw.com/p/openwrt-xburst/be69c6a | 05:46 |
qi-bot | [commit] kyak: trunk: fix kernel keymap for VolUp/Down and Del (master) http://qi-hw.com/p/openwrt-xburst/1b21e3a | 05:46 |
qi-bot | [commit] kyak: trunk: build sound modules in kernel (master) http://qi-hw.com/p/openwrt-xburst/bddbd5e | 05:46 |
qi-bot | [commit] kyak: trunk: add ks7010 support patch (master) http://qi-hw.com/p/openwrt-xburst/2cd7db6 | 05:46 |
qi-bot | [commit] Xiangfu Liu: base-files, move it to openwrt-package/nanonote-files (master) http://qi-hw.com/p/openwrt-xburst/86eeed0 | 05:46 |
qi-bot | [commit] kyak: Disable syslogd and klogd (master) http://qi-hw.com/p/openwrt-xburst/cce3e57 | 05:46 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: update to 2010.06 (master) http://qi-hw.com/p/openwrt-xburst/0c582a1 | 05:46 |
qi-bot | [commit] kyak: busybox: backport reverse history search patch (master) http://qi-hw.com/p/openwrt-xburst/66ef7cd | 05:46 |
qi-bot | [commit] Xiangfu Liu: ben nanonote: forward patches to linux-3.1 (master) http://qi-hw.com/p/openwrt-xburst/2d22f1f | 05:46 |
qi-bot | [commit] Werner Almesberger: labsw/: added spacers; shifted USB connector a little (master) http://qi-hw.com/p/wernermisc/f3e9d75 | 13:46 |
---|---|---|
qi-bot | [commit] Werner Almesberger: labsw/: changed all ring-to-hole ratios to 2.5; placed spacers at 1 mm from edge (master) http://qi-hw.com/p/wernermisc/17d2478 | 13:46 |
qi-bot | [commit] Werner Almesberger: labsw/: changed flyback diodes to SOT-323 (BAS16WT or similar) (master) http://qi-hw.com/p/wernermisc/302002c | 13:46 |
qi-bot | [commit] Werner Almesberger: labsw/: grouped opto-couplers for socketing; improved clearance of inputs (master) http://qi-hw.com/p/wernermisc/e95d20a | 13:46 |
qi-bot | [commit] Werner Almesberger: labsw/: first draft layout complete (master) http://qi-hw.com/p/wernermisc/80084df | 16:18 |
---|
qi-bot | [commit] Xiangfu Liu: nanonote-files copy file to etc (master) http://qi-hw.com/p/openwrt-packages/6b67573 | 00:45 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: nanonote-files bump version number (master) http://qi-hw.com/p/openwrt-packages/0e59c0f | 00:48 |
qi-bot | [commit] Werner Almesberger: labsw/: schematics, layout, and header.fpd update (in progress) (master) http://qi-hw.com/p/wernermisc/c0bfec4 | 11:20 |
qi-bot | [commit] Xiangfu Liu: not working without asound.conf, asound.conf make MIC not working (master) http://qi-hw.com/p/openwrt-packages/7d202ed | 00:10 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: nanonote-files: add hwclock --hctosys when shutdown (master) http://qi-hw.com/p/openwrt-packages/b685397 | 01:09 |
qi-bot | [commit] Werner Almesberger: logo/corners.fig: some clarifications here as well (master) http://qi-hw.com/p/wernermisc/6f479af | 00:02 |
---|---|---|
qi-bot | [commit] Werner Almesberger: Merge branch 'master' of projects.qi-hardware.com:wernermisc (master) http://qi-hw.com/p/wernermisc/c340788 | 00:02 |
qi-bot | [commit] Xiangfu Liu: pem update to 0.7.9 (master) http://qi-hw.com/p/openwrt-packages/1aac941 | 03:35 |
qi-bot | [commit] Xiangfu Liu: Merge branch 'master' of projects.qi-hardware.com:openwrt-packages (master) http://qi-hw.com/p/openwrt-packages/77c55db | 03:35 |
qi-bot | [commit] Xiangfu Liu: nanonote-files: add software volume control (master) http://qi-hw.com/p/openwrt-packages/2818807 | 02:03 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: nanonote-files add system volume control thanks EdorFaus (master) http://qi-hw.com/p/openwrt-packages/dab010a | 02:03 |
qi-bot | [commit] Xiangfu Liu: config.full_system include new packages (master) http://qi-hw.com/p/openwrt-packages/efbdee0 | 02:55 |
qi-bot | [commit] Xiangfu Liu: gmu update release version for the volume button patch (master) http://qi-hw.com/p/openwrt-packages/488c05f | 03:04 |
qi-bot | [commit] Xiangfu Liu: supertux icon resize to 32x32 (master) http://qi-hw.com/p/gmenu2x/7426afb | 04:14 |
qi-bot | [commit] Xiangfu Liu: gmenu2x update (master) http://qi-hw.com/p/openwrt-packages/43ed54b | 04:15 |
qi-bot | [commit] Xiangfu Liu: nanonote: add timeout, add poweroff and reboot buttons (master) http://qi-hw.com/p/gmenu2x/93c58bf | 05:17 |
qi-bot | [commit] Xiangfu Liu: gmenu2x update (master) http://qi-hw.com/p/openwrt-packages/09a6030 | 05:20 |
qi-bot | [commit] Xiangfu Liu: Revert "nanonote-files: add software volume control" (master) http://qi-hw.com/p/openwrt-packages/6b164a7 | 05:44 |
qi-bot | [commit] Xiangfu Liu: disable MIC by default (master) http://qi-hw.com/p/openwrt-packages/460e0fa | 05:44 |
qi-bot | [commit] Werner Almesberger: modules/sot.fpd: experimental "generic" SOT footprint (master) http://qi-hw.com/p/kicad-libs/5e1d03b | 14:27 |
qi-bot | [commit] Werner Almesberger: modules/stdpass.fpd: added 2010 and 2512 (imperial) footprints (draft) (master) http://qi-hw.com/p/kicad-libs/0d0c302 | 14:27 |
qi-bot | [commit] Werner Almesberger: labsw/: schematics symbols and footprints (master) http://qi-hw.com/p/wernermisc/2c5a008 | 18:43 |
qi-bot | [commit] Werner Almesberger: labsw/: BOOKSHELF and mechanical drawings (master) http://qi-hw.com/p/wernermisc/50157a4 | 18:43 |
qi-bot | [commit] Werner Almesberger: logo/: "digitalized" Qi-Hardware logo (master) http://qi-hw.com/p/wernermisc/fe057ee | 18:43 |
qi-bot | [commit] kyak: gcc-mips workaround (master) http://qi-hw.com/p/openwrt-packages/b14a89b | 19:10 |
qi-bot | [commit] kyak: Revert "gcc-mips workaround" (master) http://qi-hw.com/p/openwrt-packages/1080cfe | 20:32 |
qi-bot | [commit] kyak: gcc-mips: temporary workaround (master) http://qi-hw.com/p/openwrt-packages/a772fbe | 20:32 |
qi-bot | [commit] Werner Almesberger: logo/border.fig: various definitions of borders (master) http://qi-hw.com/p/wernermisc/8c52517 | 22:01 |
qi-bot | [commit] Werner Almesberger: logo/border.fig: more clarifications (master) http://qi-hw.com/p/wernermisc/8f8af98 | 23:13 |
qi-bot | [commit] Werner Almesberger: logo/corners.fig: some clarifications here as well (master) http://qi-hw.com/p/wernermisc/cd19fe6 | 23:13 |
qi-bot | [commit] Xiangfu Liu: work around on python (master) http://qi-hw.com/p/openwrt-packages/0df4b6d | 06:32 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: nanonote speedup powerup, thanks Bas (master) http://qi-hw.com/p/openwrt-packages/0ffd3d0 | 06:42 |
qi-bot | [commit] Xiangfu Liu: gmenu2x wallpaper only support .png (master) http://qi-hw.com/p/gmenu2x/46d6809 | 07:13 |
qi-bot | [commit] Xiangfu Liu: gmenu2x update (master) http://qi-hw.com/p/openwrt-packages/c609bba | 07:24 |
qi-bot | [commit] Xiangfu Liu: 4th update to 2.61.2 (master) http://qi-hw.com/p/openwrt-packages/c4d594a | 07:24 |
qi-bot | [commit] Xiangfu Liu: ben nanonote: forward patches to linux-3.1 (next) http://qi-hw.com/p/openwrt-xburst/2d22f1f | 08:20 |
qi-bot | [commit] Xiangfu Liu: nanonote mtd.nn: disable kernel log when normal boot (master) http://qi-hw.com/p/openwrt-packages/d95cfe1 | 08:52 |
qi-bot | [commit] Xiangfu Liu: change the console blank to 30 seconds, thanks kyak (master) http://qi-hw.com/p/openwrt-packages/70ce35e | 09:38 |
qi-bot | [commit] Xiangfu Liu: nanonote: add 4th entry (master) http://qi-hw.com/p/gmenu2x/9dc513f | 11:29 |
qi-bot | [commit] Xiangfu Liu: gmenu2x update (master) http://qi-hw.com/p/openwrt-packages/58392ee | 11:30 |
qi-bot | [commit] Xiangfu Liu: nanonote: add python lua guile icons (master) http://qi-hw.com/p/gmenu2x/41e5f31 | 11:55 |
qi-bot | [commit] Xiangfu Liu: gmenu2x update (master) http://qi-hw.com/p/openwrt-packages/6baf30d | 11:56 |
qi-bot | [commit] kyak: killall gmenu2x.bin (not gmenu2x) for faster Off button reaction (master) http://qi-hw.com/p/openwrt-packages/72b8767 | 00:02 |
---|---|---|
qi-bot | [commit] kyak: mc: override the upstream version to include wide char support (master) http://qi-hw.com/p/openwrt-packages/7f56d7c | 09:51 |
qi-bot | [commit] Xiangfu Liu: nanonote: reflash_ben.sh update option -t for download testing version images (master) http://qi-hw.com/p/openwrt-packages/5538303 | 11:30 |
---|---|---|
qi-bot | [commit] kyak: reflash_ben.sh: small fixup in help output (master) http://qi-hw.com/p/openwrt-packages/b3492d3 | 15:24 |
qi-bot | [commit] kyak: busybox: backport reverse history search patch (master) http://qi-hw.com/p/openwrt-xburst/3368b5e | 20:23 |
qi-bot | [commit] kyak: config.full_system: enable busybox reverse history search (master) http://qi-hw.com/p/openwrt-packages/68f2779 | 20:25 |
qi-bot | [commit] kyak: add vitetris (master) http://qi-hw.com/p/gmenu2x/e98e68a | 23:17 |
qi-bot | [commit] kyak: config.full_system: include vitetris (master) http://qi-hw.com/p/openwrt-packages/0c32381 | 23:19 |
qi-bot | [commit] kyak: gmenu2x: update to the latest git (include vitetris) (master) http://qi-hw.com/p/openwrt-packages/d4c8f4d | 23:19 |
qi-bot | [commit] Maarten ter Huurne: mtd: cc_ftl: Do not report correctable ECC errors as I/O errors. (jz-2.6.34) http://qi-hw.com/p/qi-kernel/32ac6c1 | 16:45 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: mtd: Work around potential deadlock. (jz-2.6.34) http://qi-hw.com/p/qi-kernel/adb8a6e | 16:45 |
qi-bot | [commit] Maarten ter Huurne: mtd: cc_ftl: Support partition tables inside CC_FTL block devices. (jz-2.6.34) http://qi-hw.com/p/qi-kernel/5895636 | 16:45 |
qi-bot | [commit] Maarten ter Huurne: jz4740: nand: Enable NAND in static memory bank 1. (jz-2.6.34) http://qi-hw.com/p/qi-kernel/56dbbbd | 16:45 |
qi-bot | [commit] Maarten ter Huurne: Merge remote branch 'qi-kernel/jz-2.6.34' into jz-2.6.34 (jz-2.6.34) http://qi-hw.com/p/qi-kernel/401472a | 16:45 |
qi-bot | [commit] Maarten ter Huurne: a320: board: Adapted to new location of "jz4740_mmc.h". (jz-2.6.34) http://qi-hw.com/p/qi-kernel/d51fd84 | 16:45 |
qi-bot | [commit] Maarten ter Huurne: jz4740: slcd: Initial support for double buffering. (jz-2.6.34) http://qi-hw.com/p/qi-kernel/c38cb10 | 16:45 |
qi-bot | [commit] Maarten ter Huurne: Merge remote branch 'qi-kernel/jz-2.6.34' into jz-2.6.34 (jz-2.6.34) http://qi-hw.com/p/qi-kernel/8e57f1f | 16:45 |
qi-bot | [commit] Maarten ter Huurne: jz4740: nand: Fixed addressing of static memory banks. (jz-2.6.34) http://qi-hw.com/p/qi-kernel/07983ef | 16:45 |
qi-bot | [commit] Maarten ter Huurne: Merge remote branch 'qi-kernel/jz-2.6.34' into jz-2.6.34 (jz-2.6.34) http://qi-hw.com/p/qi-kernel/9923ce5 | 16:45 |
qi-bot | [commit] Maarten ter Huurne: Updated header paths to match new upstream locations. (jz-2.6.34) http://qi-hw.com/p/qi-kernel/ec7112d | 16:45 |
qi-bot | [commit] Maarten ter Huurne: Merge commit '07983ef95d20bd4f29ef4fc49f53f265e085f7d8' into jz-2.6.34 (jz-2.6.34) http://qi-hw.com/p/qi-kernel/cf30fb6 | 16:45 |
qi-bot | [commit] Maarten ter Huurne: MMC: jz4740: Fixed card change detection. (jz-2.6.34) http://qi-hw.com/p/qi-kernel/a267b41 | 16:45 |
qi-bot | [commit] Maarten ter Huurne: a320: Added ccnand device nodes to initrd. (jz-2.6.34) http://qi-hw.com/p/qi-kernel/04055f4 | 16:45 |
qi-bot | [commit] Maarten ter Huurne: a320: Enable key repeat. (jz-2.6.34) http://qi-hw.com/p/qi-kernel/fea3607 | 16:45 |
qi-bot | [commit] Maarten ter Huurne: MTD: NAND: jz4740: Fix remove function. (jz-2.6.34) http://qi-hw.com/p/qi-kernel/9c5557e | 16:45 |
qi-bot | [commit] Maarten ter Huurne: MTD: NAND: jz4740: Request and configure GPIO pins for NAND chip select. (jz-2.6.34) http://qi-hw.com/p/qi-kernel/63b52d8 | 16:45 |
qi-bot | [commit] Maarten ter Huurne: a320: Use 8 bits per block in bad block table. (jz-2.6.34) http://qi-hw.com/p/qi-kernel/abc3c08 | 16:45 |
qi-bot | [commit] Maarten ter Huurne: a320_defconfig: Remove RNDIS support for CDC Ethernet. (jz-2.6.34) http://qi-hw.com/p/qi-kernel/9ec8603 | 16:45 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: SLCD: Fix bytes per frame for TV-out. (jz-2.6.34) http://qi-hw.com/p/qi-kernel/954664a | 16:45 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: Add cpufreq support. (jz-2.6.36) http://qi-hw.com/p/qi-kernel/664cba0 | 16:45 |
qi-bot | [commit] Maarten ter Huurne: MIPS: Implement flush_kernel_dcache_page(). (jz-2.6.36) http://qi-hw.com/p/qi-kernel/eab211c | 16:45 |
qi-bot | [commit] Maarten ter Huurne: /dev/mem: Add kernel config option to omit this device. (jz-2.6.36) http://qi-hw.com/p/qi-kernel/cb5c0de | 16:45 |
qi-bot | [commit] Maarten ter Huurne: cpufreq_stats: Support runtime changes to frequency table. (jz-2.6.36) http://qi-hw.com/p/qi-kernel/c3c4d20 | 16:45 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: Add Dingux logo. (jz-2.6.36) http://qi-hw.com/p/qi-kernel/e9d6ec7 | 16:45 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: Add Dingoo A320 board support. (jz-2.6.36) http://qi-hw.com/p/qi-kernel/7089ab9 | 16:45 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: Added setting of PLL rate and main dividers. (jz-2.6.36) http://qi-hw.com/p/qi-kernel/2295e65 | 16:45 |
qi-bot | [commit] Maarten ter Huurne: a320 snd: Add SoC sound support for Dingoo A320. (jz-2.6.36) http://qi-hw.com/p/qi-kernel/14d6a20 | 16:45 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: SLCD framebufer driver. (jz-2.6.36) http://qi-hw.com/p/qi-kernel/0542d5f | 16:45 |
qi-bot | [commit] Maarten ter Huurne: mtd: cc_ftl: New FTL driver for media players using China Chip firmware. (jz-2.6.36) http://qi-hw.com/p/qi-kernel/f2a4e73 | 16:45 |
qi-bot | [commit] Maarten ter Huurne: MTD: JZ4740: Expand eccpos to 72 bytes. (jz-2.6.36) http://qi-hw.com/p/qi-kernel/01979d3 | 16:45 |
qi-bot | [commit] Maarten ter Huurne: MTD: NAND: JZ4740: Experimental multi-bank support (jz-2.6.36) http://qi-hw.com/p/qi-kernel/27faf34 | 16:45 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: A320: Updated signature of panic blink function (jz-2.6.36) http://qi-hw.com/p/qi-kernel/b85ab7c | 16:45 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: A320: Force vmlinuz load address on Dingoo A320 (jz-2.6.36) http://qi-hw.com/p/qi-kernel/507a71d | 16:45 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: a320_defconfig: Default config for Dingoo A320. (jz-2.6.36) http://qi-hw.com/p/qi-kernel/2540fce | 16:45 |
qi-bot | [commit] Paul Cercueil: Add support for the hardware watchdog found in Ingenic's jz4740 System-on-Chip. (jz-2.6.36) http://qi-hw.com/p/qi-kernel/25b5850 | 16:45 |
qi-bot | [commit] Maarten ter Huurne: MIPS: A320: defconfig: Enabled watchdog. (jz-2.6.36) http://qi-hw.com/p/qi-kernel/a2373ea2 | 16:46 |
qi-bot | [commit] Maarten ter Huurne: Revert "Add support for the hardware watchdog found in Ingenic's jz4740 System-on-Chip." (jz-2.6.36) http://qi-hw.com/p/qi-kernel/ace7f40 | 16:46 |
qi-bot | [commit] Paul Cercueil: Add support for the hardware watchdog found in Ingenic's jz4740 System-on-Chip. (jz-2.6.36) http://qi-hw.com/p/qi-kernel/3bf7d9d | 16:46 |
qi-bot | [commit] Maarten ter Huurne: MIPS: A320: Add watchdog device to A320 board. (jz-2.6.36) http://qi-hw.com/p/qi-kernel/c12a0a5 | 16:46 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: Added setting of PLL rate and main dividers. (jz-2.6.37) http://qi-hw.com/p/qi-kernel/babfe8f | 16:46 |
qi-bot | [commit] Maarten ter Huurne: a320 snd: Add SoC sound support for Dingoo A320. (jz-2.6.37) http://qi-hw.com/p/qi-kernel/c4d3c9e | 16:46 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: SLCD framebufer driver. (jz-2.6.37) http://qi-hw.com/p/qi-kernel/3dba5b5 | 16:46 |
qi-bot | [commit] Maarten ter Huurne: mtd: cc_ftl: New FTL driver for media players using China Chip firmware. (jz-2.6.37) http://qi-hw.com/p/qi-kernel/39a59e1 | 16:46 |
qi-bot | [commit] Maarten ter Huurne: MTD: NAND: JZ4740: Experimental multi-bank support (jz-2.6.37) http://qi-hw.com/p/qi-kernel/b2f7fd4 | 16:46 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: A320: Updated signature of panic blink function (jz-2.6.37) http://qi-hw.com/p/qi-kernel/c097652 | 16:46 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: A320: Force vmlinuz load address on Dingoo A320 (jz-2.6.37) http://qi-hw.com/p/qi-kernel/777c870 | 16:46 |
qi-bot | [commit] Paul Cercueil: Add support for the hardware watchdog found in Ingenic's jz4740 System-on-Chip. (jz-2.6.37) http://qi-hw.com/p/qi-kernel/342357a | 16:46 |
qi-bot | [commit] Maarten ter Huurne: MIPS: A320: Add watchdog device to A320 board. (jz-2.6.37) http://qi-hw.com/p/qi-kernel/ca86623 | 16:46 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: a320_defconfig: Default config for Dingoo A320. (jz-2.6.37) http://qi-hw.com/p/qi-kernel/afc26b1 | 16:46 |
qi-bot | [commit] Maarten ter Huurne: a320 snd: Update SoC sound support for Dingoo A320. (jz-2.6.37) http://qi-hw.com/p/qi-kernel/a9b21d6 | 16:46 |
qi-bot | [commit] Maarten ter Huurne: mtd: nand: Fixed null pointer dereference. (jz-2.6.37) http://qi-hw.com/p/qi-kernel/9c70070b | 16:46 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: A320: Specify number of ECC bytes in OOB area. (jz-2.6.37) http://qi-hw.com/p/qi-kernel/95cb447 | 16:46 |
qi-bot | [commit] Maarten ter Huurne: MIPS: A320: defconfig: Enable CONFIG_NETDEVICES. (jz-2.6.37) http://qi-hw.com/p/qi-kernel/d8a94d8 | 16:46 |
qi-bot | [commit] Maarten ter Huurne: MIPS: A320: defconfig: Enable CONFIG_PACKET. (jz-2.6.37) http://qi-hw.com/p/qi-kernel/dccd3f9 | 16:46 |
qi-bot | [commit] Maarten ter Huurne: MIPS: A320: defconfig: Disable OSS compatibility drivers. (jz-2.6.37) http://qi-hw.com/p/qi-kernel/e4c9829 | 16:46 |
qi-bot | [commit] Maarten ter Huurne: MIPS: A320: defconfig: Tweak scheduling options to get lower latencies. (jz-2.6.37) http://qi-hw.com/p/qi-kernel/72375ec | 16:46 |
qi-bot | [commit] Maarten ter Huurne: MIPS: A320: defconfig: Reverted high-resolution timers. (jz-2.6.37) http://qi-hw.com/p/qi-kernel/c1d5cc0 | 16:46 |
qi-bot | [commit] Maarten ter Huurne: MIPS: A320: Properly named audio channels and added switches on them. (jz-2.6.37) http://qi-hw.com/p/qi-kernel/333e10e | 16:46 |
qi-bot | [commit] Maarten ter Huurne: MIPS: A320: Set backlight period to 5 ms. (jz-2.6.37) http://qi-hw.com/p/qi-kernel/9b8fabb | 16:46 |
qi-bot | [commit] Maarten ter Huurne: defconfig for the Ben NanoNote: updated for 3.0 (jz-3.0) http://qi-hw.com/p/qi-kernel/489845c | 16:57 |
qi-bot | [commit] Maarten ter Huurne: a320 snd: Uncommented speaker definitions: the guessed values seem to work. (jz-2.6.34-rc7) http://qi-hw.com/p/qi-kernel/d761b24 | 17:06 |
qi-bot | [commit] Maarten ter Huurne: jz4740_dma: Only set no-descriptor flag when enabling the channel. Otherwise, there can be data loss using the transfer (seen with SLCD). (jz-2.6.34-rc7) http://qi-hw.com/p/qi-kernel/ee18998 | 17:06 |
qi-bot | [commit] Maarten ter Huurne: jz4740-slcd-fb: Removed obsolete comment: the cause was found and fixed in the DMA driver. (jz-2.6.34-rc7) http://qi-hw.com/p/qi-kernel/329aaf8 | 17:06 |
qi-bot | [commit] CongoZombie: Added JZ_RISC specific code from the Ingenic kernel used by BooBoo (jz-2.6.34-rc7) http://qi-hw.com/p/qi-kernel/326ac0e | 17:06 |
qi-bot | [commit] CongoZombie: Revert commit "Added JZ_RISC specific code from the Ingenic kernel used by BooBoo" (jz-2.6.34-rc7) http://qi-hw.com/p/qi-kernel/3b37e76 | 17:06 |
qi-bot | [commit] CongoZombie: Added zImage to .gitignore (jz-2.6.34-rc7) http://qi-hw.com/p/qi-kernel/bc960c2 | 17:06 |
qi-bot | [commit] Maarten ter Huurne: a320_defconfig: Disable MMC bounce buffer. This avoid an unnecessary copy step. It also avoids what seems to be a cache flush problem, which would cause invalid code to be executed when running big executables. (jz-2.6.34-rc7) http://qi-hw.com/p/qi-kernel/3e53974 | 17:06 |
qi-bot | [commit] Maarten ter Huurne: Merge branch 'jz-2.6.34-rc7' of github.com:mthuurne/opendingux-kernel into jz-2.6.34-rc7 (jz-2.6.34-rc7) http://qi-hw.com/p/qi-kernel/51f79e5 | 17:06 |
qi-bot | [commit] Maarten ter Huurne: jz4740-slcd-fb: Avoid race conditions between refresh (upload) and framebuffer state changes. (jz-2.6.34-rc7) http://qi-hw.com/p/qi-kernel/36c6ca2 | 17:06 |
qi-bot | [commit] Maarten ter Huurne: mips: Implement flush_kernel_dcache_page(). This is just a quick fix; a real fix would implement flush_kernel_vmap_range() and invalidate_kernel_vmap_range() as well, but those are only used in XFS for which we have no need on the Dingoo. (jz-2.6.34-rc7) http://qi-hw.com/p/qi-kernel/b2ecc5e | 17:06 |
qi-bot | [commit] Maarten ter Huurne: jz4740-slcd-fb: Compute the number of pixels instead of hardcoding it. (jz-2.6.34-rc7) http://qi-hw.com/p/qi-kernel/973dc02 | 17:06 |
qi-bot | [commit] Maarten ter Huurne: jz4740-slcd-fb: Removed obsolete TODOs. (jz-2.6.34-rc7) http://qi-hw.com/p/qi-kernel/4f54f6c | 17:06 |
qi-bot | [commit] Maarten ter Huurne: jz4740-i2s: Corrected DMA width constants. This driver relied on the wrong encoding in arch/mips/include/asm/mach-jz4740/dma.h, which were fixed recently. (jz-2.6.34-rc7) http://qi-hw.com/p/qi-kernel/624774d | 17:06 |
qi-bot | [commit] Maarten ter Huurne: jz4740-i2s: Declare that both the JZ4740 AIC and its internal codec are capable of 48 kHz output. (jz-2.6.34-rc7) http://qi-hw.com/p/qi-kernel/9cf1273 | 17:06 |
qi-bot | [commit] Maarten ter Huurne: jz4740-i2s: Fixed indentation. (jz-2.6.34-rc7) http://qi-hw.com/p/qi-kernel/8765509 | 17:06 |
qi-bot | [commit] Maarten ter Huurne: jz4740_timer: Mask the "half" timer interrupts in plat_time_init(). This fixes a hang when booting on the Dingoo A320 in USB boot mode with the Rockbox USBtool. (jz-2.6.34-rc7) http://qi-hw.com/p/qi-kernel/08d2d24 | 17:06 |
qi-bot | [commit] Maarten ter Huurne: jz4740_timer: Fixed indentation. (jz-2.6.34-rc7) http://qi-hw.com/p/qi-kernel/7ae7dc6 | 17:06 |
qi-bot | [commit] Maarten ter Huurne: Revert "jz4740_timer: Fixed indentation." (jz-2.6.34-rc7) http://qi-hw.com/p/qi-kernel/4ab1455 | 17:06 |
qi-bot | [commit] Maarten ter Huurne: Revert "jz4740_timer: Mask the "half" timer interrupts in plat_time_init(). This fixes a hang when booting on the Dingoo A320 in USB boot mode with the Rockbox USBtool." (jz-2.6.34-rc7) http://qi-hw.com/p/qi-kernel/aff7f39 | 17:06 |
qi-bot | [commit] Maarten ter Huurne: Merge branch 'jz-2.6.34-rc7' of projects.qi-hardware.com:qi-kernel into jz-2.6.34-rc7 (jz-2.6.34-rc7) http://qi-hw.com/p/qi-kernel/e73fb09 | 17:06 |
qi-bot | [commit] Maarten ter Huurne: MTD: JZ4740: Expand eccpos to 72 bytes. (jz-2.6.35) http://qi-hw.com/p/qi-kernel/d02d671 | 17:16 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: A320: Take advantage of 72-byte eccpos. (jz-2.6.35) http://qi-hw.com/p/qi-kernel/8f56829 | 17:16 |
qi-bot | [commit] Nitin Gupta: Support generic I/O requests (jz-2.6.35) http://qi-hw.com/p/qi-kernel/12e9bd2 | 17:16 |
qi-bot | [commit] Nitin Gupta: Rename ramzswap files to zram (jz-2.6.35) http://qi-hw.com/p/qi-kernel/6141d61 | 17:16 |
qi-bot | [commit] Nitin Gupta: Rename ramzswap to zram in code (jz-2.6.35) http://qi-hw.com/p/qi-kernel/43551b5 | 17:16 |
qi-bot | [commit] Nitin Gupta: Rename ramzswap to zram in documentation (jz-2.6.35) http://qi-hw.com/p/qi-kernel/8b74237 | 17:16 |
qi-bot | [commit] Randy Dunlap: Staging: zram: fix build errors, depends on BLOCK (jz-2.6.35) http://qi-hw.com/p/qi-kernel/61aa607 | 17:16 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: A320: Updated for ramzswap -> zram rename. (jz-2.6.35) http://qi-hw.com/p/qi-kernel/18da016 | 17:16 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: A320: Added PCM device to board support file. (jz-2.6.35) http://qi-hw.com/p/qi-kernel/5f89a60 | 17:16 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: Round PLL frequency down to a multiple of 24 MHz. (jz-2.6.35) http://qi-hw.com/p/qi-kernel/b95a25a | 17:16 |
qi-bot | [commit] Maarten ter Huurne: /dev/mem: Add kernel config option to omit this device. (jz-2.6.35) http://qi-hw.com/p/qi-kernel/485ead6 | 17:16 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: A320: Disable /dev/mem and /dev/kmem. (jz-2.6.35) http://qi-hw.com/p/qi-kernel/87429d6 | 17:16 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: A320: Reformatted gpio keys table. (jz-2.6.35) http://qi-hw.com/p/qi-kernel/45d30ba | 17:16 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: A320: Declare power slider as wakeup button. (jz-2.6.35) http://qi-hw.com/p/qi-kernel/6a6c220 | 17:16 |
qi-bot | [commit] Phillip Lougher: Squashfs: add LZMA compression (jz-2.6.35) http://qi-hw.com/p/qi-kernel/45c3204 | 17:16 |
qi-bot | [commit] Phillip Lougher: Squashfs: Make unlzma available to non initramfs/initrd code (jz-2.6.35) http://qi-hw.com/p/qi-kernel/330dac3 | 17:16 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: A320: Switch rootfs from romfs to squashfs. (jz-2.6.35) http://qi-hw.com/p/qi-kernel/0bb81e1 | 17:16 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: A320: Disabled various config options. (jz-2.6.35) http://qi-hw.com/p/qi-kernel/8041f12 | 17:16 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: A320: Removed part of command line that disables DMA in USB gadget driver. (jz-2.6.35) http://qi-hw.com/p/qi-kernel/325f0a1 | 17:16 |
qi-bot | [commit] Maarten ter Huurne: Merge branch 'jz-2.6.35' of projects.qi-hardware.com:qi-kernel into jz-2.6.35 (jz-2.6.35) http://qi-hw.com/p/qi-kernel/3c67615 | 17:16 |
qi-bot | [commit] Maarten ter Huurne: Revert "NAND: Optimize reading the eec data for the JZ4740 (evil hack)" (jz-2.6.38) http://qi-hw.com/p/qi-kernel/25478d1 | 17:19 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: Corrected clock divider masks. (jz-2.6.38) http://qi-hw.com/p/qi-kernel/8b04469 | 17:19 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: A320: Force backlight off when ILI is off. (jz-2.6.38) http://qi-hw.com/p/qi-kernel/66672e1 | 17:19 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: SLCD: Make blanking and TV-out mutually exclusive. (jz-2.6.38) http://qi-hw.com/p/qi-kernel/e84aa54 | 17:19 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: A320: defconfig: Disable unused in-kernel framework. (jz-2.6.38) http://qi-hw.com/p/qi-kernel/7d3ff3e | 17:19 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: A320: defconfig: Assume SD card is not removed during suspend. (jz-2.6.38) http://qi-hw.com/p/qi-kernel/0617ec9 | 17:19 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: Add one-shot feature flag for main timer. (jz-2.6.38) http://qi-hw.com/p/qi-kernel/1d433da | 17:19 |
qi-bot | [commit] Maarten ter Huurne: Merge branch 'jz-2.6.38' of git://projects.qi-hardware.com/qi-kernel into jz-2.6.38 (jz-2.6.38) http://qi-hw.com/p/qi-kernel/7b58f7b | 17:19 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: SLCD: panels: Add function to send data without a command. (jz-2.6.38) http://qi-hw.com/p/qi-kernel/fa461a8 | 17:19 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: SLCD: panels: Add ILI9338 support. (jz-2.6.38) http://qi-hw.com/p/qi-kernel/722b6ea | 17:19 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: clock: Removed CPHYSADDR. (jz-2.6.38) http://qi-hw.com/p/qi-kernel/257100f | 17:19 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: setup: Autodetect physical memory. (jz-2.6.38) http://qi-hw.com/p/qi-kernel/8893e95 | 17:19 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: A320: defconfig: Removed "mem=" parameter. (jz-2.6.38) http://qi-hw.com/p/qi-kernel/4a69c28 | 17:19 |
qi-bot | [commit] Maarten ter Huurne: MTD: NAND: JZ4740: Finished multi-bank support and added autodetection (jz-2.6.38) http://qi-hw.com/p/qi-kernel/3ed7d04 | 17:19 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: A320: Probe all banks for NAND chips. (jz-2.6.38) http://qi-hw.com/p/qi-kernel/66dc1bf | 17:19 |
qi-bot | [commit] Maarten ter Huurne: OpenDingux: initrd: Specify initrd contents using text file instead of cpio archive (jz-2.6.38) http://qi-hw.com/p/qi-kernel/a6140ae | 17:19 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: A320: defconfig: Use text-based initrd definition (jz-2.6.38) http://qi-hw.com/p/qi-kernel/6871b87 | 17:19 |
qi-bot | [commit] Maarten ter Huurne: OpenDingux: initrd: Remove initrd cpio archive (jz-2.6.38) http://qi-hw.com/p/qi-kernel/f360f6e | 17:19 |
qi-bot | [commit] Maarten ter Huurne: OpenDingux: initrd: Removed unnecessary nodes and dirs (jz-2.6.38) http://qi-hw.com/p/qi-kernel/8e3a5fb | 17:19 |
qi-bot | [commit] Maarten ter Huurne: Merge branch 'jz-2.6.38' of projects.qi-hardware.com:qi-kernel into jz-2.6.38 (jz-2.6.38) http://qi-hw.com/p/qi-kernel/32f5864 | 17:19 |
qi-bot | [commit] Maarten ter Huurne: MTD: NAND: JZ4740: Multi-bank support with autodetection (jz-2.6.39) http://qi-hw.com/p/qi-kernel/54e2765 | 17:19 |
qi-bot | [commit] Maarten ter Huurne: Revert "NAND: Optimize reading the eec data for the JZ4740 (evil hack)" (jz-2.6.39) http://qi-hw.com/p/qi-kernel/60a59e9 | 17:19 |
qi-bot | [commit] Maarten ter Huurne: OpenDingux: initrd: Specify initrd contents using text file (jz-2.6.39) http://qi-hw.com/p/qi-kernel/ef58786 | 17:19 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: A320: Force vmlinuz load address on Dingoo A320 (jz-2.6.39) http://qi-hw.com/p/qi-kernel/6feb628 | 17:19 |
qi-bot | [commit] Maarten ter Huurne: MIPS: A320: Add Dingoo A320 board support. (jz-2.6.39) http://qi-hw.com/p/qi-kernel/ff3fd14 | 17:19 |
qi-bot | [commit] Maarten ter Huurne: MIPS: A320: Default config for Dingoo A320. (jz-2.6.39) http://qi-hw.com/p/qi-kernel/4a45a18 | 17:19 |
qi-bot | [commit] Lars-Peter Clausen: Fix MFD jz4740-ts entry (jz-2.6.39) http://qi-hw.com/p/qi-kernel/6981bbb | 17:19 |
qi-bot | [commit] Lars-Peter Clausen: jz4740: Fix compile error (jz-2.6.39) http://qi-hw.com/p/qi-kernel/be97723 | 17:19 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: USB: Fix packet read/write functions. (jz-2.6.39) http://qi-hw.com/p/qi-kernel/e6ec57a | 17:19 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: A320: defconfig: Disable CPU frequency scaling for now. (jz-2.6.39) http://qi-hw.com/p/qi-kernel/f1bb5e6 | 17:19 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: Kconfig: Mark the Dingoo A320 as a JZ4740 SoC system. (jz-2.6.39) http://qi-hw.com/p/qi-kernel/5e5911b | 17:19 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: cpufreq: Set CE bit after PLL freq change. (jz-2.6.39) http://qi-hw.com/p/qi-kernel/821be15 | 17:19 |
qi-bot | [commit] Maarten ter Huurne: MMC: JZ4740: Added support for CPU frequency changing. (jz-2.6.39) http://qi-hw.com/p/qi-kernel/ff305ba | 17:19 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: A320: defconfig: Re-enabled cpufreq driver. (jz-2.6.39) http://qi-hw.com/p/qi-kernel/bda734b | 17:19 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: cpufreq: select CPU_FREQ_TABLE (jz-2.6.39) http://qi-hw.com/p/qi-kernel/f0c8e57 | 17:19 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: A320: defconfig: Enabled suspend. (jz-2.6.39) http://qi-hw.com/p/qi-kernel/f9cc6bc | 17:19 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: reset: Initialize hibernate wakeup counters. (jz-2.6.39) http://qi-hw.com/p/qi-kernel/2e39ab1 | 17:19 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: A320: Debounce microswitch buttons. (jz-2.6.39) http://qi-hw.com/p/qi-kernel/ce0911a | 17:19 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: A320: Updated quickstart documentation. (jz-2.6.39) http://qi-hw.com/p/qi-kernel/ec7cab4 | 17:19 |
qi-bot | [commit] Maarten ter Huurne: Merge branch 'jz-2.6.39' of projects.qi-hardware.com:qi-kernel into jz-2.6.39 (jz-2.6.39) http://qi-hw.com/p/qi-kernel/a0fd16d | 17:19 |
qi-bot | [commit] Lars-Peter Clausen: MIPS: JZ4740: Use generic irq chip (jz-3.0) http://qi-hw.com/p/qi-kernel/5db3e85 | 17:33 |
qi-bot | [commit] Lars-Peter Clausen: MIPS: JZ4740: GPIO: Simplify IRQ demuxer (jz-3.0) http://qi-hw.com/p/qi-kernel/26c132b | 17:33 |
qi-bot | [commit] Lars-Peter Clausen: MIPS: JZ4740: GPIO: Check correct IRQ in demux handler (jz-3.0) http://qi-hw.com/p/qi-kernel/3bdcac8 | 17:33 |
qi-bot | [commit] Xiangfu Liu: Nanonote: ignore HUP signal (master) http://qi-hw.com/p/gmenu2x/64108ab | 02:10 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: gmenu2x, update and immediately stop then poweroff (master) http://qi-hw.com/p/openwrt-packages/d320abc | 02:40 |
qi-bot | [commit] Werner Almesberger: bitcmp/: little utility to find which bits differ between two files (master) http://qi-hw.com/p/wernermisc/08a13cd | 10:00 |
qi-bot | [commit] Werner Almesberger: bitcmp/bitcmp.c: fixed fencepost error (master) http://qi-hw.com/p/wernermisc/78d9fda | 10:11 |
qi-bot | [commit] Werner Almesberger: bitcmp/bitcmp.c: added indication of direction of bit flip (1 -> 0 or 0 -> 1) (master) http://qi-hw.com/p/wernermisc/dd0c4ec | 16:36 |
qi-bot | [commit] Werner Almesberger: Updated modules/INFO and modules/Makefile for ssop.fpd (master) http://qi-hw.com/p/kicad-libs/57d2356 | 00:10 |
---|---|---|
qi-bot | [commit] Werner Almesberger: Added PIC18F46J50 (28QFN) symbol (master) http://qi-hw.com/p/kicad-libs/f0ad807 | 00:10 |
qi-bot | [commit] Ayla: Enable the SDL timer subsystem only if the backlight timeout is enabled. (master) http://qi-hw.com/p/gmenu2x/e282f8a | 00:19 |
qi-bot | [commit] Ayla: GMenu2X does not need to init the audio subsystem of SDL. (master) http://qi-hw.com/p/gmenu2x/bffef7c | 00:19 |
qi-bot | [commit] Werner Almesberger: modules/qfn.fpd: added paste island ratio calculation, with NXP recommendations (master) http://qi-hw.com/p/kicad-libs/d04a714 | 15:29 |
qi-bot | [commit] Werner Almesberger: modules/qfn.fpd (QFN28-MCHP-ML): footprint for Microchip 0.65 mm 28QFN package (master) http://qi-hw.com/p/kicad-libs/0f1829b | 15:29 |
qi-bot | [commit] Werner Almesberger: dsv/dsv: added option -p to show the path to the file (master) http://qi-hw.com/p/eda-tools/45031eb | 16:56 |
qi-bot | [commit] Ayla: Added a boolean function to know if the powersaver is running. (master) http://qi-hw.com/p/gmenu2x/f318286 | 22:50 |
qi-bot | [commit] Ayla: Create the powersaver instance on demand and destroy it when not needed. (master) http://qi-hw.com/p/gmenu2x/fca8c8e | 22:50 |
qi-bot | [commit] Ayla: The input manager should check whether a powersaver instance is running, to not create one when it's not needed. (master) http://qi-hw.com/p/gmenu2x/8c1f4ab | 22:50 |
qi-bot | [commit] Werner Almesberger: Moved qfn.fpd and qfp.fpd from ben-wpan to kicad-libs (incoming) (master) http://qi-hw.com/p/kicad-libs/4265fc1 | 03:47 |
---|---|---|
qi-bot | [commit] Werner Almesberger: nxuart/nxuart.pro: updated for move of qfn.fpd (master) http://qi-hw.com/p/ben-blinkenlights/437eafe | 03:47 |
qi-bot | [commit] Werner Almesberger: Updated profiles (atben, atusb, atusb-sil, cntr) for move of qfn.fpd and qfp.fpd (master) http://qi-hw.com/p/ben-wpan/7a8ca1b | 03:47 |
qi-bot | [commit] Werner Almesberger: Moved qfn.fpd and qfp.fpd from ben-wpan to kicad-libs (deletion) (master) http://qi-hw.com/p/ben-wpan/f21fdf6 | 03:47 |
qi-bot | [commit] Werner Almesberger: BOOKSHELF (AN068, pcbcng): "Adapting TI LPRF Reference Designs for Layer Stacking" (master) http://qi-hw.com/p/ben-wpan/71aacb1 | 03:47 |
qi-bot | [commit] Werner Almesberger: Moved atmega8u2, c8051f320, c8051f326 symbol from ben-wpan to kicad-libs (incoming) (master) http://qi-hw.com/p/kicad-libs/4ade85b | 04:26 |
qi-bot | [commit] Werner Almesberger: Updated profiles (atusb, atusb-sil, cntr) for move of MCU symbols (master) http://qi-hw.com/p/ben-wpan/e87ad08 | 04:26 |
qi-bot | [commit] Werner Almesberger: Moved atmega8u2, c8051f320, c8051f326 symbol from ben-wpan to kicad-libs (deletion) (master) http://qi-hw.com/p/ben-wpan/42bf0f5 | 04:26 |
qi-bot | [commit] Werner Almesberger: components/components.pro: removed unnecessary .lib extension in file names (master) http://qi-hw.com/p/kicad-libs/7103b4b | 05:49 |
qi-bot | [commit] Werner Almesberger: Moved atmega48-mmu symbol from ben-wpan to kicad-libs (incoming) (master) http://qi-hw.com/p/kicad-libs/fd7d74a | 05:49 |
qi-bot | [commit] Werner Almesberger: nxuart/nxuart.pro: updated for move of atmega48-mmu symbol (master) http://qi-hw.com/p/ben-blinkenlights/a4ca380 | 05:49 |
qi-bot | [commit] Werner Almesberger: Moved atmega48-mmu symbol from ben-wpan to kicad-libs (deletion) (master) http://qi-hw.com/p/ben-blinkenlights/d16acb6 | 05:49 |
qi-bot | [commit] Werner Almesberger: Moved atmega48-mmu symbol from ben-blinkenlights to kicad-libs (deletion) (master) http://qi-hw.com/p/ben-blinkenlights/9bb36e6 | 05:55 |
qi-bot | [commit] Werner Almesberger: Merge branch 'master' of projects.qi-hardware.com:ben-blinkenlights (master) http://qi-hw.com/p/ben-blinkenlights/70ca7a5 | 05:55 |
qi-bot | [commit] Werner Almesberger: Moved mini-usb.fpd and usb_a_plug_smt.fpd from ben-wpan to kicad-libs (incoming) (master) http://qi-hw.com/p/kicad-libs/39c7ee7 | 06:09 |
qi-bot | [commit] Werner Almesberger: Updated profiles (atusb, atusb-sil, cntr) for move of usb_a_plug_smt.fpd (master) http://qi-hw.com/p/ben-wpan/c699a92 | 06:09 |
qi-bot | [commit] Werner Almesberger: Moved mini-usb.fpd and usb_a_plug_smt.fpd from ben-wpan to kicad-libs (deletion) (master) http://qi-hw.com/p/ben-wpan/0f26c57 | 06:09 |
qi-bot | [commit] Werner Almesberger: Moved usb-a-pcb.fpd from f32xbase/c2usb to kicad-libs (incoming) (master) http://qi-hw.com/p/kicad-libs/dc3baf5 | 07:05 |
qi-bot | [commit] Werner Almesberger: c2usb/c2usb.pro: updated for usb-a-pcb.fpd move (master) http://qi-hw.com/p/f32xbase/b9bd712 | 07:05 |
qi-bot | [commit] Werner Almesberger: Moved usb-a-pcb.fpd from f32xbase/c2usb to kicad-libs (deletion) (master) http://qi-hw.com/p/f32xbase/6d750ee | 07:05 |
qi-bot | [commit] Werner Almesberger: Moved mini_usb_b and usb_a_plug symbol from ben-wpan to kicad-libs (incoming) (master) http://qi-hw.com/p/kicad-libs/886a0af | 07:43 |
qi-bot | [commit] Werner Almesberger: Updated profiles (atusb, atusb-sil, cntr) for move of USB symbols (master) http://qi-hw.com/p/ben-wpan/b401a53 | 07:43 |
qi-bot | [commit] Werner Almesberger: Moved mini_usb_b and usb_a_plug symbol from ben-wpan to kicad-libs (deletions) (master) http://qi-hw.com/p/ben-wpan/f06306f | 07:43 |
qi-bot | [commit] Werner Almesberger: Moved sot-323.fpd from ben-wpan to kicad-libs (incoming) (master) http://qi-hw.com/p/kicad-libs/a8d0c40 | 07:51 |
qi-bot | [commit] Werner Almesberger: cntr/cntr.pro: removed no longer used footprint sot-323 (master) http://qi-hw.com/p/ben-wpan/2b21cd2 | 07:51 |
qi-bot | [commit] Werner Almesberger: Moved sot-323.fpd from ben-wpan to kicad-libs (deletion) (master) http://qi-hw.com/p/ben-wpan/89fdfc9 | 07:51 |
qi-bot | [commit] Werner Almesberger: Moved ssop.fpd from f32xbase/c2usb to kicad-libs (incoming) (master) http://qi-hw.com/p/kicad-libs/74980e3 | 08:05 |
qi-bot | [commit] Werner Almesberger: c2usb/c2usb.pro: updated for move of ssop.fpd to kicad-libs (master) http://qi-hw.com/p/f32xbase/619f4c8 | 08:05 |
qi-bot | [commit] Werner Almesberger: Moved ssop.fpd from f32xbase/c2usb to kicad-libs (deletions) (master) http://qi-hw.com/p/f32xbase/405a0c8 | 08:05 |
qi-bot | [commit] Bart van Strien: Add libunistring (master) http://qi-hw.com/p/openwrt-packages/bb2a84c | 00:01 |
---|
qi-bot | [commit] Ayla: Read config file(s) present on both system and user-specific directories. (master) http://qi-hw.com/p/gmenu2x/3d3e0fa | 01:42 |
---|---|---|
qi-bot | [commit] Ayla: Set card root to /media by default for the Dingux port. (master) http://qi-hw.com/p/gmenu2x/4fd4b23 | 01:42 |
qi-bot | [commit] Werner Almesberger: schhist/README: fixed typo (by Holger Freyther) (master) http://qi-hw.com/p/eda-tools/487e0e6 | 11:04 |
qi-bot | [commit] Werner Almesberger: ircstat/: IRC traffic analysis (master) http://qi-hw.com/p/wernermisc/db8c6d5 | 20:28 |
---|---|---|
qi-bot | [commit] Ayla: Shorted a too long caption on the contextual menu. (master) http://qi-hw.com/p/gmenu2x/5b49bf0 | 21:37 |
qi-bot | [commit] Ayla: Added a default config file for the Dingux port. (master) http://qi-hw.com/p/gmenu2x/c5d4cfb | 21:37 |
qi-bot | [commit] Ayla: Shorted a too long caption on the contextual menu. (2) (master) http://qi-hw.com/p/gmenu2x/7f08e85 | 21:37 |
qi-bot | [commit] Xiangfu Liu: milkymist config.minimal: change ROOTFS PARTSIZE to 4M (master) http://qi-hw.com/p/openwrt-packages/a3e9bea | 02:31 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: usbboot: remove useless NAND_READ_TO_RAM from host. (master) http://qi-hw.com/p/xburst-tools/ad27b63 | 08:19 |
qi-bot | [commit] Xiangfu Liu: gmenu2x update (master) http://qi-hw.com/p/openwrt-packages/f8c5391 | 01:49 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: nanonote-files update build script file (master) http://qi-hw.com/p/openwrt-packages/a6f250f | 01:55 |
qi-bot | [commit] Werner Almesberger: ptrude/: functions for path stretching and calculation of proportional length (master) http://qi-hw.com/p/cae-tools/7ef6269 | 00:55 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ptrude/: changed extrusion from xy path to xz path; variable number of faces (master) http://qi-hw.com/p/cae-tools/ee63445 | 00:55 |
qi-bot | [commit] Werner Almesberger: ptrude/: many major math fixes, especially in stretch_path (master) http://qi-hw.com/p/cae-tools/26a0f4c | 00:55 |
qi-bot | [commit] Werner Almesberger: ptrude/: path extrusion, work in progress (master) http://qi-hw.com/p/cae-tools/d4c96f1 | 01:34 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ptrude/: cleanup and addition of comments (WIP) (master) http://qi-hw.com/p/cae-tools/dcb1c78 | 17:33 |
qi-bot | [commit] Werner Almesberger: ptrude/: more comments; copyright headers; improved Makefile (master) http://qi-hw.com/p/cae-tools/188cf9d | 17:33 |
qi-bot | [commit] Werner Almesberger: ptrude/: proper command-line handling; open -d for debug mode (master) http://qi-hw.com/p/cae-tools/3dcd5cc | 17:33 |
qi-bot | [commit] Werner Almesberger: ptrude/: added (overly, this far) simple extruder (master) http://qi-hw.com/p/cae-tools/c202eda | 17:33 |
qi-bot | [commit] Xiangfu Liu: new package for keep milkymist config files (master) http://qi-hw.com/p/openwrt-packages/787a430 | 02:08 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: m1: add busybox EXTRA_CFLAGS option (master) http://qi-hw.com/p/openwrt-packages/6226524 | 02:29 |
qi-bot | [commit] Xiangfu Liu: add debian package stuff (master) http://qi-hw.com/p/fped/b6807a7 | 09:12 |
qi-bot | [commit] Xiangfu Liu: clean up the Build-Depends. (master) http://qi-hw.com/p/fped/e394af8 | 09:12 |
qi-bot | [commit] Xiangfu Liu: use the new version rules. (master) http://qi-hw.com/p/fped/b17ed1a | 09:12 |
qi-bot | [commit] Xiangfu Liu: add debian/fped.manpages for install manpage (master) http://qi-hw.com/p/fped/b9a6369 | 09:12 |
qi-bot | [commit] Xiangfu Liu: update to svn rev 5982, enable dh_auto_test (master) http://qi-hw.com/p/fped/17dc8ff | 09:12 |
qi-bot | [commit] Xiangfu Liu: use usual name for orig tarball top-level directory (master) http://qi-hw.com/p/fped/069e82f | 09:12 |
qi-bot | [commit] Xiangfu Liu: update take svn rev: 5983 (master) http://qi-hw.com/p/fped/a6d21bb | 09:12 |
qi-bot | [commit] Xiangfu Liu: remove the Build-Depends ttf-liberation (master) http://qi-hw.com/p/fped/21f2ae2 | 09:12 |
qi-bot | [commit] Xiangfu Liu: update to svn rev 5986 (master) http://qi-hw.com/p/fped/5fa6038 | 09:12 |
qi-bot | [commit] Xiangfu Liu: override dh_auto_clean, use make spotless instread (master) http://qi-hw.com/p/fped/5ac0cb5 | 09:12 |
qi-bot | [commit] Xiangfu Liu: add ghostscript to Build-Depends (master) http://qi-hw.com/p/fped/ced96bb | 09:12 |
qi-bot | [commit] Xiangfu Liu: update the homepage to help webpage (master) http://qi-hw.com/p/fped/4a68274 | 09:12 |
qi-bot | [commit] Xiangfu Liu: update to r5997 (master) http://qi-hw.com/p/fped/ceaa519 | 09:12 |
qi-bot | [commit] Xiangfu Liu: debian package update to 5999 (master) http://qi-hw.com/p/fped/a49bbd2 | 09:12 |
qi-bot | [commit] Xiangfu Liu: update to r6005 (master) http://qi-hw.com/p/fped/acccaee | 09:12 |
qi-bot | [commit] Xiangfu Liu: update to r6006 (master) http://qi-hw.com/p/fped/6396ca8 | 09:12 |
qi-bot | [commit] Werner Almesberger: Makefile: switched from SVN to git (master) http://qi-hw.com/p/fped/6cadac8 | 09:41 |
qi-bot | [commit] Werner Almesberger: xxx (master) http://qi-hw.com/p/fped/9465776 | 09:41 |
qi-bot | [commit] Werner Almesberger: changed GUI page location, checkout instructions, and e-mail address (master) http://qi-hw.com/p/fped/f0c0ae7 | 09:41 |
qi-bot | [commit] Ayla: Dingux port: added a "power off" icon on the "settings" tab. (master) http://qi-hw.com/p/gmenu2x/e066050 | 12:58 |
qi-bot | [commit] Ayla: Cleaned GP2X-specific code that was built on all platforms. (master) http://qi-hw.com/p/gmenu2x/5f77e3b | 23:19 |
qi-bot | [commit] David Kühling: gforth: use a primary download location that actually works (downloads.qi-hw.com) (master) http://qi-hw.com/p/openwrt-packages/7e83fd1 | 19:33 |
---|---|---|
qi-bot | [commit] Ayla: GMenu2X now won't clear the framebuffer on exit. (master) http://qi-hw.com/p/gmenu2x/f6c456f | 23:50 |
qi-bot | [commit] Xiangfu Liu: fix spell (master) http://qi-hw.com/p/xburst-tools/326700e | 14:04 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: debug_ops should be char not unsigned (master) http://qi-hw.com/p/xburst-tools/d7801e1 | 14:04 |
qi-bot | [commit] Ayla: Create the "sections" user directory if required, when creating a new link. (master) http://qi-hw.com/p/gmenu2x/4636a84 | 10:08 |
---|---|---|
qi-bot | [commit] Werner Almesberger: pkgology/1g-monadic: additional package for single-input 1G chips (master) http://qi-hw.com/p/wernermisc/2054148 | 10:58 |
qi-bot | [commit] Werner Almesberger: m1/rc3/gates/rst.sch: removed R60, fixed right-hand circuit, added titles (master) http://qi-hw.com/p/wernermisc/282e447 | 10:58 |
qi-bot | [commit] Maarten ter Huurne: Removed wallpaper images of which the size did not match the resolution there were used at. (master) http://qi-hw.com/p/gmenu2x/b5698e8 | 21:53 |
qi-bot | [commit] Werner Almesberger: mm1rc3rst/: moved to mm1rc3/rst/ (master) http://qi-hw.com/p/wernermisc/5fbc3f9 | 09:46 |
---|---|---|
qi-bot | [commit] Werner Almesberger: pkgology/1g-dyadic: package overview of dyadic 1G packages (based on 74xxx1G08) (master) http://qi-hw.com/p/wernermisc/bc25051 | 09:46 |
qi-bot | [commit] Werner Almesberger: components/: moved editing helpers over from gta02-core (master) http://qi-hw.com/p/kicad-libs/85d269a | 15:43 |
qi-bot | [commit] Werner Almesberger: components/: 74x1g00_5, 74x1g125, 74x2g126 from gta02-core (by Alvaro Lopes) (master) http://qi-hw.com/p/kicad-libs/a8518e3 | 15:43 |
qi-bot | [commit] Werner Almesberger: components/: added 74x1g08_5 and 74x1g08_6 (master) http://qi-hw.com/p/kicad-libs/7066fcc | 15:43 |
qi-bot | [commit] Werner Almesberger: components/: added 74x1g07_5 and 74x1g07_4 (master) http://qi-hw.com/p/kicad-libs/9ce03d8 | 15:43 |
qi-bot | [commit] Werner Almesberger: components/README: described component addition workflow (master) http://qi-hw.com/p/kicad-libs/dd771df | 15:57 |
qi-bot | [commit] Werner Almesberger: sourcery/: sourcing surveys for 74AUP1G07 and 74AUP1G08 (master) http://qi-hw.com/p/wernermisc/358d32c | 18:04 |
qi-bot | [commit] Werner Almesberger: components/: changed output pin tyoe of 74x1g07_*.lib to open collector (master) http://qi-hw.com/p/kicad-libs/21c356e | 18:59 |
qi-bot | [commit] Werner Almesberger: components/: added 74x1g07_6 (master) http://qi-hw.com/p/kicad-libs/b96ea6f | 23:18 |
qi-bot | [commit] Werner Almesberger: for completeness, also consider the 74AUP2G07 (master) http://qi-hw.com/p/wernermisc/f949fcf | 23:24 |
qi-bot | [commit] Werner Almesberger: mm1rc3/gates/: improved reset circuit using 74AUP1G gates (draft) (master) http://qi-hw.com/p/wernermisc/86fe3f1 | 23:24 |
qi-bot | [commit] Werner Almesberger: mm1rc3/: renamed to m1rc3/ (master) http://qi-hw.com/p/wernermisc/4797aed | 23:24 |
qi-bot | [commit] Werner Almesberger: cad/test1/Makefile (cadmium.stl): corrected typo in file name (master) http://qi-hw.com/p/wernermisc/7a39c5e | 08:08 |
---|---|---|
qi-bot | [commit] Werner Almesberger: mm1rc3rst/fix2.sch: changed diode symbol to from regular to Schottky (master) http://qi-hw.com/p/wernermisc/fe20d74 | 08:08 |
qi-bot | [commit] Werner Almesberger: cad/test2/button.py: Cadmium version without artifact prevention (master) http://qi-hw.com/p/wernermisc/83ddf11 | 08:34 |
qi-bot | [commit] Werner Almesberger: cad/: added description to 2nd series of tests and a pointer from the 1st series (master) http://qi-hw.com/p/wernermisc/8ad6df6 | 10:39 |
qi-bot | [commit] Werner Almesberger: cad/test2/: copied original version of sources from cad/test1/ (master) http://qi-hw.com/p/wernermisc/70eef56 | 14:47 |
qi-bot | [commit] Werner Almesberger: cad/test2/button.py: removed "epsilon" and "noise" (master) http://qi-hw.com/p/wernermisc/4296080 | 14:47 |
qi-bot | [commit] Werner Almesberger: cad/test*/button.scad: remove definitions related to the pusher, not used here (master) http://qi-hw.com/p/wernermisc/8ca4b01 | 14:47 |
qi-bot | [commit] Werner Almesberger: qpkg/: committed some old changes (non-functional) (master) http://qi-hw.com/p/wernermisc/326cd33 | 14:47 |
qi-bot | [commit] Werner Almesberger: cad/test2/button.scad: added overlaps to eliminate artefacts at coincident faces (master) http://qi-hw.com/p/wernermisc/521f031 | 18:24 |
qi-bot | [commit] Werner Almesberger: cad/test2/README: added more results and cleaned up the text (master) http://qi-hw.com/p/wernermisc/3f820dc | 18:24 |
qi-bot | [commit] Werner Almesberger: cad/test1/: experiment with Free scripted CAD systems (OpenSCAD and Cadmium) (master) http://qi-hw.com/p/wernermisc/2db4c1a | 22:32 |
---|
qi-bot | [commit] Xiangfu Liu: nanonotefile: reflash_ben.sh support download and flash dailybuild images (master) http://qi-hw.com/p/openwrt-packages/b3c2074 | 01:30 |
---|
qi-bot | [commit] Ayla: Added sections directories for the dingux build. (master) http://qi-hw.com/p/gmenu2x/5a27851 | 01:17 |
---|---|---|
qi-bot | [commit] Ayla: Fixed a good number of memory leaks. (master) http://qi-hw.com/p/gmenu2x/81a607c | 18:40 |
qi-bot | [commit] Xiangfu Liu: nanonote remote -b in mc (master) http://qi-hw.com/p/gmenu2x/b3a73d2 | 06:00 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: nanonote tetris: change the font before start (master) http://qi-hw.com/p/gmenu2x/a4a5325 | 06:07 |
qi-bot | [commit] Xiangfu Liu: lynx: add libidn to DEPENDS (master) http://qi-hw.com/p/openwrt-packages/9544fc5 | 06:16 |
qi-bot | [commit] Werner Almesberger: mm1rc3/fix?.fig: various reset fixes Sebastien proposed (master) http://qi-hw.com/p/wernermisc/ed4101f | 13:33 |
---|---|---|
qi-bot | [commit] Werner Almesberger: mm1rc3/fix2.sch: Qucs simulation of fix2 (master) http://qi-hw.com/p/wernermisc/a374dab | 13:34 |
qi-bot | [commit] Werner Almesberger: mm1rc3rst/fix2.sch: use fixed V range for result; don't open data display (master) http://qi-hw.com/p/wernermisc/c0395dc | 13:42 |
qi-bot | [commit] kyak: mtd-utils: replace underscores with dashes in the sub-package names (master) http://qi-hw.com/p/openwrt-packages/42badae | 13:17 |
---|
qi-bot | [commit] kyak: config.full_system: disable some busybox utils in favor of already included fully-functional counterparts; enable all dejavu fonts (the package had been splitted recently); enable ip utility (master) http://qi-hw.com/p/openwrt-packages/848173c | 17:16 |
---|---|---|
qi-bot | [commit] Jiri Brozovsky: Cscope source code browser -initial port to OpenWRT. (master) http://qi-hw.com/p/openwrt-packages/1ce048c | 20:20 |
qi-bot | [commit] Werner Almesberger: fisl2011/talk-ex.tex: Spanish translation, by David Samblas (master) http://qi-hw.com/p/wernermisc/6ec53ad | 22:26 |
qi-bot | [commit] Werner Almesberger: fisl2011/talk-es.tex: fixed capitalization of esquemas in mid-sentence (master) http://qi-hw.com/p/wernermisc/419dd44 | 22:31 |
qi-bot | [commit] Werner Almesberger: fisl2011/Makefile: added generation and uploading of the Spanish translation (master) http://qi-hw.com/p/wernermisc/4fb280c | 22:33 |
qi-bot | [commit] Werner Almesberger: atusb/fw/mac.c: reserved code 0 and added notification of TX completion (master) http://qi-hw.com/p/ben-wpan/eeeb559 | 18:35 |
---|---|---|
qi-bot | [commit] Werner Almesberger: tools/lib/atusb-common.c (atusb_tx): wait for and receive the TX completion (master) http://qi-hw.com/p/ben-wpan/8f8c414 | 18:35 |
qi-bot | [commit] Werner Almesberger: tools/atrf-txrx/atrf-txrx.c (main): removed endless loop in mode_hmac (master) http://qi-hw.com/p/ben-wpan/7605d8c | 18:35 |
qi-bot | [commit] kyak: update asound.state (master) http://qi-hw.com/p/openwrt-packages/71066b6 | 18:43 |
qi-bot | [commit] Werner Almesberger: spi_atusb: corrected name and typo in title comment (ben-wpan) http://qi-hw.com/p/qi-kernel/7569b81 | 18:56 |
qi-bot | [commit] Werner Almesberger: spi_atben, spi_atusb: trimmed "dirty" #include of at86rf230.h (ben-wpan) http://qi-hw.com/p/qi-kernel/72b3769 | 18:56 |
qi-bot | [commit] Werner Almesberger: atusb/fw/board_app.c (INT0_vect): limit interrupt serials to 0x00-0x7f (master) http://qi-hw.com/p/ben-wpan/c47f52d | 09:15 |
---|---|---|
qi-bot | [commit] Werner Almesberger: atusb/fw/Makefile (bindist): new target to upload and describe atusb.bin (master) http://qi-hw.com/p/ben-wpan/1ad8683 | 09:15 |
qi-bot | [commit] Werner Almesberger: atusb/fw/board_app.c (INT0_vect): limit interrupt serials to 0x80-0xff (master) http://qi-hw.com/p/ben-wpan/7cae01b | 20:51 |
qi-bot | [commit] Werner Almesberger: atusb/fw/Makefile (bindist): new target to upload and describe atusb.bin (master) http://qi-hw.com/p/ben-wpan/e700b81 | 20:51 |
qi-bot | [commit] Werner Almesberger: atusb/fw/: added "HardMAC" support (not yet using the TRX's MAC) (master) http://qi-hw.com/p/ben-wpan/c107130 | 20:51 |
qi-bot | [commit] Werner Almesberger: libatrf: added HardMAC functions (master) http://qi-hw.com/p/ben-wpan/862b554 | 20:51 |
qi-bot | [commit] Werner Almesberger: tools/lib/: added HardMAC functions to the atusb drivers (master) http://qi-hw.com/p/ben-wpan/49d6067 | 20:51 |
qi-bot | [commit] Werner Almesberger: tools/atrf-txrx/: added option -H to enter simple HardMAC mode (master) http://qi-hw.com/p/ben-wpan/5621282 | 20:51 |
qi-bot | [commit] Werner Almesberger: atusb/fw/: some small "HardMAC" fixes (master) http://qi-hw.com/p/ben-wpan/da7803a | 20:51 |
qi-bot | [commit] Werner Almesberger: Merge branch 'master' of projects.qi-hardware.com:ben-wpan (master) http://qi-hw.com/p/ben-wpan/23c24f6 | 20:51 |
qi-bot | [commit] Ayla: The links will now be loaded from both the system and the user-specific directories. (install_locations) http://qi-hw.com/p/gmenu2x/f7817b1 | 00:51 |
---|---|---|
qi-bot | [commit] Ayla: The user skin directories were not created when saving the skin.conf file; Thus it was never saved. (master) http://qi-hw.com/p/gmenu2x/12a7fe4 | 16:18 |
qi-bot | [commit] Ayla: Merge branch 'master' into install_locations (master) http://qi-hw.com/p/gmenu2x/f10bb60 | 16:18 |
qi-bot | [commit] Maarten ter Huurne: Added missing #include. (master) http://qi-hw.com/p/gmenu2x/8995a3c | 16:18 |
qi-bot | [commit] Maarten ter Huurne: Cleaned up link flags. (master) http://qi-hw.com/p/gmenu2x/23042f3 | 16:18 |
qi-bot | [commit] Ayla: The FileLister won't list a file if a previous one has the same file name (without path). (master) http://qi-hw.com/p/gmenu2x/6c97139 | 16:18 |
qi-bot | [commit] Ayla: Merge branch 'install_locations' of projects.qi-hardware.com:gmenu2x into install_locations (master) http://qi-hw.com/p/gmenu2x/d0a24ac | 16:18 |
qi-bot | [commit] Ayla: Fixed the renameSection() and deleteSection() functions to use the new directories. The sections can now be renamed and deleted. (master) http://qi-hw.com/p/gmenu2x/6cb7ce1 | 16:18 |
qi-bot | [commit] Ayla: The log.txt file will now be saved on the user-specific directory. (master) http://qi-hw.com/p/gmenu2x/3998e19 | 16:18 |
qi-bot | [commit] Ayla: Moved all the data files (translations, skins...) to the "data" folder. (master) http://qi-hw.com/p/gmenu2x/47a4e5c | 16:18 |
qi-bot | [commit] Ayla: Moved the pandora's "input.conf" file lying in the top directory to the pandora/data directory, replacing the previous (obsolete) one. (master) http://qi-hw.com/p/gmenu2x/34af938 | 16:18 |
qi-bot | [commit] Ayla: The ./configure will now accept the --enable-platform switch. (master) http://qi-hw.com/p/gmenu2x/b646c33 | 16:18 |
qi-bot | [commit] Ayla: Merge branch 'master' of projects.qi-hardware.com:gmenu2x into install_locations (master) http://qi-hw.com/p/gmenu2x/ef4b012 | 16:18 |
qi-bot | [commit] kyak: Update gmenu2x.sh for install_locations changes (master) http://qi-hw.com/p/gmenu2x/4b22318 | 16:18 |
qi-bot | [commit] Ayla: GMenu2X now won't load skin files from the Default skin when using another skin. (master) http://qi-hw.com/p/gmenu2x/439d25c | 16:18 |
qi-bot | [commit] Ayla: The links will now be loaded from both the system and the user-specific directories. (master) http://qi-hw.com/p/gmenu2x/f7817b1 | 16:18 |
qi-bot | [commit] Ayla: Merge branch 'install_locations' (master) http://qi-hw.com/p/gmenu2x/55dad41 | 16:18 |
qi-bot | [commit] Ayla: Add a function which unlocks the virtual terminal before and after each execution of a binary. (master) http://qi-hw.com/p/gmenu2x/0993a48 | 16:18 |
qi-bot | [commit] Ayla: Removed a bug where the Default skin was chosen even if another (working) skin was defined on the config file. (master) http://qi-hw.com/p/gmenu2x/00d8a04 | 16:18 |
qi-bot | [commit] Ayla: Revert "GMenu2X now won't load skin files from the Default skin when using another skin." (master) http://qi-hw.com/p/gmenu2x/11e58c8 | 16:18 |
qi-bot | [commit] Ayla: The SurfaceCollection won't load the files selection.png, bottombar.png or topbar.png from the Default skin if they are missing in the current skin. (master) http://qi-hw.com/p/gmenu2x/3a85cab | 16:18 |
qi-bot | [commit] kyak: gmenu2x: update to the latest git (master) http://qi-hw.com/p/openwrt-packages/6038548 | 16:53 |
qi-bot | [commit] Werner Almesberger: tools/usbperf/: measure the rate of control transfers a device can do (master) http://qi-hw.com/p/ben-wpan/97604d7 | 02:17 |
---|---|---|
qi-bot | [commit] kyak: qball: patches went upstream, updated to 1.3 (master) http://qi-hw.com/p/openwrt-packages/3b735b0 | 08:29 |
qi-bot | [commit] Xiangfu Liu: new package: gjay, thanks Joshua Judson Rosen (master) http://qi-hw.com/p/openwrt-packages/9c1f686 | 01:50 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: new package: ibrcommon ibrdtn-tools ibrdtn ibrdtnd (master) http://qi-hw.com/p/openwrt-packages/42adc48 | 02:30 |
qi-bot | [commit] Xiangfu Liu: ibrcommon: add missing depends cppunit (master) http://qi-hw.com/p/openwrt-packages/ea2dcff | 02:31 |
qi-bot | [commit] Werner Almesberger: atusb: use MODULE_AUTHOR according to include/linux/module.h; added myself (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/8463388 | 03:19 |
qi-bot | [commit] Werner Almesberger: atusb: renamed ctrl_urb to just "urb" (ben-wpan) http://qi-hw.com/p/qi-kernel/0d21f45 | 03:20 |
qi-bot | [commit] Werner Almesberger: atusb: remove atusb_read2 (ben-wpan) http://qi-hw.com/p/qi-kernel/67a52a6 | 03:20 |
qi-bot | [commit] Werner Almesberger: atusb: renamed atusb_read1_cb to atusb_ctrl_cb (ben-wpan) http://qi-hw.com/p/qi-kernel/7b40185 | 03:20 |
qi-bot | [commit] Werner Almesberger: atusb: remove more unused items (usb_irq, urb_completion) (ben-wpan) http://qi-hw.com/p/qi-kernel/2723787 | 03:20 |
qi-bot | [commit] Werner Almesberger: atusb: added section titles and moved code in a more logical order (ben-wpan) http://qi-hw.com/p/qi-kernel/0d9f58b | 03:20 |
qi-bot | [commit] Werner Almesberger: atusb: honor thine card-punching ancestors (ben-wpan) http://qi-hw.com/p/qi-kernel/3000508 | 03:20 |
qi-bot | [commit] Werner Almesberger: atusb: merged error checking and request completion for control transfers (ben-wpan) http://qi-hw.com/p/qi-kernel/247b48a | 03:20 |
qi-bot | [commit] Werner Almesberger: Revert "ieee802154/at86rf230: Be more verbose and disable irq handling for now" (ben-wpan) http://qi-hw.com/p/qi-kernel/7a7da98 | 03:20 |
qi-bot | [commit] Werner Almesberger: atusb: added tentative interrupt support (ben-wpan) http://qi-hw.com/p/qi-kernel/7fa3bd3 | 03:20 |
qi-bot | [commit] Werner Almesberger: atusb: converted interrupt delivery to use tasklets (ben-wpan) http://qi-hw.com/p/qi-kernel/edb55e1 | 03:20 |
qi-bot | [commit] Werner Almesberger: atusb: added interrupt URB removal on cleanup (ben-wpan) http://qi-hw.com/p/qi-kernel/64e0322 | 03:20 |
qi-bot | [commit] Werner Almesberger: atusb: moved firmware version info before AT86RF230 driver bringup (ben-wpan) http://qi-hw.com/p/qi-kernel/4c977e4 | 03:20 |
qi-bot | [commit] Werner Almesberger: atusb: initially disable the interrupt delivery tasklet (ben-wpan) http://qi-hw.com/p/qi-kernel/206feca | 03:20 |
qi-bot | [commit] Werner Almesberger: atusb: correctly print the build date (ben-wpan) http://qi-hw.com/p/qi-kernel/c35f50f | 03:20 |
qi-bot | [commit] Werner Almesberger: atusb: implement interrupt synchronization via a 10 ms delay timer (ben-wpan) http://qi-hw.com/p/qi-kernel/eb1a51e | 03:20 |
qi-bot | [commit] Werner Almesberger: atusb: updated to do list and added missing \n to dev_info (ben-wpan) http://qi-hw.com/p/qi-kernel/1b9d72f | 03:20 |
qi-bot | [commit] Werner Almesberger: atusb: adjusted dev_* severity levels (ben-wpan) http://qi-hw.com/p/qi-kernel/b003725 | 03:20 |
qi-bot | [commit] Werner Almesberger: at86rf230: we may be in BUSY_RX after commanding RX_ON (ben-wpan) http://qi-hw.com/p/qi-kernel/e21c6ed | 03:20 |
qi-bot | [commit] Werner Almesberger: atusb: changed interrupt synchronization from fixed delay to SPI_WRITE2_SYNC (ben-wpan) http://qi-hw.com/p/qi-kernel/b2d71a9 | 03:20 |
qi-bot | [commit] Werner Almesberger: atusb: use MODULE_AUTHOR according to include/linux/module.h; added myself (ben-wpan) http://qi-hw.com/p/qi-kernel/8463388 | 03:20 |
qi-bot | [commit] Werner Almesberger: atusb, atben: moved from spi/ to ieee802154/; renamed atusb to spi_atusb (ben-wpan) http://qi-hw.com/p/qi-kernel/6c17a31 | 03:34 |
qi-bot | [commit] Werner Almesberger: atusb: we don't need to depend on CONFIG_SPI explicitly (ben-wpan) http://qi-hw.com/p/qi-kernel/4592d8e | 05:27 |
qi-bot | [commit] Werner Almesberger: install/INSTALL-PC: updated lists of config options to enable (master) http://qi-hw.com/p/ben-wpan/f586be4 | 05:28 |
qi-bot | [commit] Ayla: GMenu2X now won't load skin files from the Default skin when using another skin. (install_locations) http://qi-hw.com/p/gmenu2x/439d25c | 23:50 |
qi-bot | [commit] Werner Almesberger: at86rf230: we may be in BUSY_RX after commanding RX_ON (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/e21c6ed | 13:26 |
---|---|---|
qi-bot | [commit] Werner Almesberger: atusb/fw/: added improved support for interrupt synchronization (master) http://qi-hw.com/p/ben-wpan/42483d6 | 19:51 |
qi-bot | [commit] Werner Almesberger: atusb: changed interrupt synchronization from fixed delay to SPI_WRITE2_SYNC (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/b2d71a9 | 19:59 |
qi-bot | [commit] kyak: libnl-1: initial port (master) http://qi-hw.com/p/openwrt-packages/a92f8c4 | 08:36 |
---|---|---|
qi-bot | [commit] kyak: lowpan-tools: initial port (master) http://qi-hw.com/p/openwrt-packages/f4a8c6a | 08:36 |
qi-bot | [commit] Werner Almesberger: drivers/spi/Kconfig: clarified description of CONFIG_SPI_ATUSB (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/c211a33 | 09:40 |
qi-bot | [commit] Werner Almesberger: drivers/spi/atusb.c: some cleanup (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/2c9194d | 09:40 |
qi-bot | [commit] Werner Almesberger: atusb: corrected freeing of setup packet in atusb_read1, maybe atusb_write (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/bccb410 | 09:40 |
qi-bot | [commit] Werner Almesberger: atusb: don't allow writes to TRX_CTRL_0 (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/c28c1cb | 09:40 |
qi-bot | [commit] Werner Almesberger: atusb: converted atusb_get_static_info to use usb_control_msg (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/429510e | 09:40 |
qi-bot | [commit] Werner Almesberger: atusb: ignore interface unless class is USB_CLASS_VENDOR_SPEC (0xff) (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/23d5eb7 | 09:40 |
qi-bot | [commit] Werner Almesberger: atusb: merged USB control message submission into common function (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/e803b81 | 09:40 |
qi-bot | [commit] Werner Almesberger: atusb: clean up interface of atusb_read1 and atusb_write (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/191d55a | 09:40 |
qi-bot | [commit] Werner Almesberger: atusb: make atusb_transfer access x[0] less (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/548e7cf | 09:40 |
qi-bot | [commit] Werner Almesberger: atusb: corrected error and message length handing for transfers (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/b12e0e7 | 09:40 |
qi-bot | [commit] kyak: lowpan-tools: install the ieee802145.h header in build root (master) http://qi-hw.com/p/openwrt-packages/f0e3a33 | 09:46 |
qi-bot | [commit] kyak: ben-wpan tools: initial port (master) http://qi-hw.com/p/openwrt-packages/3d93557 | 09:46 |
qi-bot | [commit] Werner Almesberger: atusb: integrate "buffer" into struct atusb_local, avoiding allocation (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/dfd0ed7 | 11:06 |
qi-bot | [commit] Werner Almesberger: atusb: tentative addition of "long" read/write (untested) (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/09294c5 | 12:55 |
qi-bot | [commit] Stefan Schmidt: drivers/spi/atusb: Remove some TODO items (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/2592a92 | 14:07 |
qi-bot | [commit] Stefan Schmidt: drivers/spi/atusb: Remove ctrl_urb from local struct. (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/a7cf06c | 14:07 |
qi-bot | [commit] Werner Almesberger: atusb: removed atusb_build from struct atusb_local and streamlined "static info" (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/6dfb2e5 | 14:26 |
qi-bot | [commit] Werner Almesberger: atusb: renamed ctrl_urb to just "urb" (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/0d21f45 | 14:26 |
qi-bot | [commit] Werner Almesberger: atusb: remove atusb_read2 (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/67a52a6 | 14:26 |
qi-bot | [commit] Werner Almesberger: atusb: renamed atusb_read1_cb to atusb_ctrl_cb (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/7b40185 | 14:31 |
qi-bot | [commit] Werner Almesberger: atusb: remove more unused items (usb_irq, urb_completion) (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/2723787 | 14:34 |
qi-bot | [commit] Werner Almesberger: atusb: added section titles and moved code in a more logical order (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/0d9f58b | 14:43 |
qi-bot | [commit] Werner Almesberger: atusb: honor thine card-punching ancestors (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/3000508 | 14:43 |
qi-bot | [commit] Werner Almesberger: atusb: merged error checking and request completion for control transfers (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/247b48a | 14:58 |
qi-bot | [commit] Werner Almesberger: Revert "ieee802154/at86rf230: Be more verbose and disable irq handling for now" (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/7a7da98 | 21:14 |
qi-bot | [commit] Werner Almesberger: atusb: added tentative interrupt support (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/7fa3bd3 | 21:14 |
qi-bot | [commit] Werner Almesberger: atusb: converted interrupt delivery to use tasklets (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/edb55e1 | 21:54 |
qi-bot | [commit] Werner Almesberger: atusb: added interrupt URB removal on cleanup (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/64e0322 | 21:54 |
qi-bot | [commit] Werner Almesberger: atusb: moved firmware version info before AT86RF230 driver bringup (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/4c977e4 | 21:54 |
qi-bot | [commit] Werner Almesberger: atusb: initially disable the interrupt delivery tasklet (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/206feca | 22:09 |
qi-bot | [commit] Werner Almesberger: atusb: correctly print the build date (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/c35f50f | 22:14 |
qi-bot | [commit] Werner Almesberger: atusb: implement interrupt synchronization via a 10 ms delay timer (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/eb1a51e | 23:18 |
qi-bot | [commit] Werner Almesberger: atusb: updated to do list and added missing \n to dev_info (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/1b9d72f | 23:52 |
qi-bot | [commit] Werner Almesberger: atusb: adjusted dev_* severity levels (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/b003725 | 23:52 |
qi-bot | [commit] Werner Almesberger: COPYING mentioned COPYING.GPLv2, COPYING.LGPLv21 which weren't included. Added them. (master) http://qi-hw.com/p/ben-wpan/298f084 | 03:19 |
---|---|---|
qi-bot | [commit] Werner Almesberger: AUTHORS: werner@openmoko.org is now werner@almesberger.net (master) http://qi-hw.com/p/ben-wpan/e549ee4 | 03:19 |
qi-bot | [commit] Werner Almesberger: tools/lib/atusb-common.c (atusb_open): give more detailed error message on EPERM (master) http://qi-hw.com/p/ben-wpan/1615375 | 03:19 |
qi-bot | [commit] Werner Almesberger: spi_atben: removed interrupt redirection (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/9e362c8 | 09:23 |
qi-bot | [commit] Stefan Schmidt: Merge remote-tracking branch 'origin/ben-wpan' into ben-wpan-stefan (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/bd5e2bd | 09:23 |
qi-bot | [commit] Stefan Schmidt: spi/atben: Remove sysfs files for at86rf230 regs (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/7539f44 | 09:23 |
qi-bot | [commit] Stefan Schmidt: spi/atben: Start with write (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/b5f9b73 | 09:23 |
qi-bot | [commit] Stefan Schmidt: spi/atusb: Use correct size and buffer location (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/133a8cb | 09:38 |
qi-bot | [commit] Werner Almesberger: install/INSTALL-Ben: switch linux-zigbee tools source from (old) tarball to git (master) http://qi-hw.com/p/ben-wpan/17f7b66 | 11:29 |
qi-bot | [commit] Werner Almesberger: tools/lib/atben.c: check if the 8:10 slot is available and fail if it isn't (master) http://qi-hw.com/p/ben-wpan/f535a80 | 11:29 |
qi-bot | [commit] Werner Almesberger: TODO: removed EPERM, added usb_read_bulk vs. signal, toolchain, DFU on U1010 (master) http://qi-hw.com/p/ben-wpan/e610a9e | 11:29 |
qi-bot | [commit] Stefan Schmidt: spi/atben: Fix write function. (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/cddec7a | 14:01 |
qi-bot | [commit] Werner Almesberger: atusb/fw/: added optional debug log with request ATUSB_READ_LOG (master) http://qi-hw.com/p/ben-wpan/39e3d4e | 21:53 |
qi-bot | [commit] Werner Almesberger: tools/atrf-id/atrf-id.c: new option -D to read atusb debug log (master) http://qi-hw.com/p/ben-wpan/391c37f | 21:53 |
qi-bot | [commit] Stefan Schmidt: spi/atusb: A little cleanup (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/2bcae81 | 22:25 |
qi-bot | [commit] Stefan Schmidt: spi/atusb: More cleanup (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/6a293db | 22:25 |
qi-bot | [commit] Stefan Schmidt: spi/atusb: More cleanup (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/54f9bfd | 22:25 |
qi-bot | [commit] Stefan Schmidt: ieee802154/at86rf230: Be more verbose and disable irq handling for now (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/88bf9af | 22:25 |
qi-bot | [commit] Werner Almesberger: Revert "atusb/fw/: added optional debug log with request ATUSB_READ_LOG" (master) http://qi-hw.com/p/ben-wpan/ead7ade | 22:40 |
qi-bot | [commit] Werner Almesberger: Revert "tools/atrf-id/atrf-id.c: new option -D to read atusb debug log" (master) http://qi-hw.com/p/ben-wpan/5059597 | 22:40 |
qi-bot | [commit] Stefan Schmidt: spi/atusb: Freeing the urb in the callback instead directly after submit. (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/c1c2213 | 22:55 |
qi-bot | [commit] Werner Almesberger: install/ben-wpan-config-2.6.38: enabled CONFIG_PROC_PAGE_MONITOR (master) http://qi-hw.com/p/ben-wpan/0c77658 | 17:47 |
---|---|---|
qi-bot | [commit] Werner Almesberger: Merge branch 'master' of projects.qi-hardware.com:ben-wpan (master) http://qi-hw.com/p/ben-wpan/848e5af | 17:47 |
qi-bot | [commit] Stefan Schmidt: spi/atusb: Move read1 to async usb. Broken right now. (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/5e5d491 | 17:48 |
qi-bot | [commit] Werner Almesberger: ubb-vga.c (usage): correct synopsis (-r is now called -m) (master) http://qi-hw.com/p/ben-blinkenlights/92ce053 | 18:10 |
qi-bot | [commit] Werner Almesberger: spi_atben: removed interrupt redirection (ben-wpan) http://qi-hw.com/p/qi-kernel/9e362c8 | 19:17 |
qi-bot | [commit] Werner Almesberger: switch linux-zigbee tools source from (old) tarball to git repository (master) http://qi-hw.com/p/ben-wpan/ae348fb | 23:36 |
qi-bot | [commit] Werner Almesberger: tools/Makefile (BEN_DIRS): add dirtpan iff its lowpan tools dependency is met (master) http://qi-hw.com/p/ben-wpan/71f095d | 23:36 |
qi-bot | [commit] Werner Almesberger: xxx (master) http://qi-hw.com/p/ben-wpan/6d1198c | 23:36 |
qi-bot | [commit] Werner Almesberger: tools/: moved get_key from atrf-path/gui.c to libatrf, for sharing (master) http://qi-hw.com/p/ben-wpan/56f8b2d | 23:36 |
qi-bot | [commit] Werner Almesberger: tools/atrf-rssi/gui.c (gui): accept keyboard input both from stdin and SDL (master) http://qi-hw.com/p/ben-wpan/10f618a | 23:36 |
qi-bot | [commit] Werner Almesberger: Merge branch 'master' of projects.qi-hardware.com:ben-wpan (master) http://qi-hw.com/p/ben-wpan/f279907 | 23:36 |
qi-bot | [commit] Xiangfu Liu: new package: pem, tool to help you keep track of your personal income and expenses (master) http://qi-hw.com/p/openwrt-packages/46fbba1 | 11:33 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: nanonote-files, configu.full_system include svn (master) http://qi-hw.com/p/openwrt-packages/6341d4c | 11:55 |
qi-bot | [commit] Xiangfu Liu: new package: Tempest for Eliza is a Program that uses your computer monitor to send out AM radio signals. (master) http://qi-hw.com/p/openwrt-packages/f3afa7c | 03:44 |
---|---|---|
qi-bot | [commit] nbd: ath5k: add a missing srev checks for code that lowers the synth voltage - might fix some stability issues (master) http://qi-hw.com/p/openwrt-xburst/ff655ea | 09:56 |
qi-bot | [commit] kaloz: [toolchain/gcc]: upgrade the linaro gcc to 2011.06 (master) http://qi-hw.com/p/openwrt-xburst/98d589f | 09:56 |
qi-bot | [commit] kaloz: [target/generic/3.0]: add missing kernel symbols (master) http://qi-hw.com/p/openwrt-xburst/7437ee4 | 09:56 |
qi-bot | [commit] kaloz: [cns3xxx]: preliminary 3.0 support (master) http://qi-hw.com/p/openwrt-xburst/5bdb3e2 | 09:56 |
qi-bot | [commit] Mirko Vogt: add <http://downloads.qi-hardware.com/software/mirror-openwrt-sources/> (master) http://qi-hw.com/p/openwrt-xburst/ae87489 | 09:56 |
qi-bot | [commit] Xiangfu Liu: optimize for ben nanonote (master) http://qi-hw.com/p/openwrt-xburst/463d311 | 09:56 |
qi-bot | [commit] Xiangfu Liu: [xburst] Improve mounttime (master) http://qi-hw.com/p/openwrt-xburst/06082c3 | 09:56 |
qi-bot | [commit] Xiangfu Liu: nanonote optimize (master) http://qi-hw.com/p/openwrt-xburst/7d51ed2 | 09:56 |
qi-bot | [commit] kyak: add kernel patch for setfont2 (master) http://qi-hw.com/p/openwrt-xburst/bd76150 | 09:56 |
qi-bot | [commit] Xiangfu Liu: optimize for ben nanonote (master) http://qi-hw.com/p/openwrt-xburst/03e88c4 | 09:56 |
qi-bot | [commit] kyak: config-2.6.37: enable battery, disable RNDIS (master) http://qi-hw.com/p/openwrt-xburst/93468b3 | 09:56 |
qi-bot | [commit] kyak: patches-2.6.37: support for Ben NAND partitioning (master) http://qi-hw.com/p/openwrt-xburst/52fee50 | 09:56 |
qi-bot | [commit] David Kühling: linux kernel: add CONFIG_PROC_PAGE_MONITOR=y to allow for clean user-space DMA (master) http://qi-hw.com/p/openwrt-xburst/63e49e9 | 09:56 |
qi-bot | [commit] kyak: config-2.6.37: enable options needed for keymouse (master) http://qi-hw.com/p/openwrt-xburst/0c167dc | 09:56 |
qi-bot | [commit] kyak: trunk: fix kernel keymap for VolUp/Down and Del (master) http://qi-hw.com/p/openwrt-xburst/c6f46f9 | 09:56 |
qi-bot | [commit] kyak: trunk: build sound modules in kernel (master) http://qi-hw.com/p/openwrt-xburst/7bb7d46 | 09:56 |
qi-bot | [commit] kyak: trunk: add ks7010 support patch (master) http://qi-hw.com/p/openwrt-xburst/a6a4c8c | 09:56 |
qi-bot | [commit] Xiangfu Liu: base-files, move it to openwrt-package/nanonote-files (master) http://qi-hw.com/p/openwrt-xburst/2bbcdc5 | 09:56 |
qi-bot | [commit] kyak: Disable syslogd and klogd (master) http://qi-hw.com/p/openwrt-xburst/be5d8ed | 09:56 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: update to 2010.06 (master) http://qi-hw.com/p/openwrt-xburst/07798e8 | 09:56 |
qi-bot | [commit] Werner Almesberger: switch linux-zigbee tools source from (old) tarball to git repository (master) http://qi-hw.com/p/ben-wpan/2d96152 | 15:55 |
qi-bot | [commit] Werner Almesberger: tools/Makefile (BEN_DIRS): add dirtpan iff its lowpan tools dependency is met (master) http://qi-hw.com/p/ben-wpan/e3066d7 | 15:55 |
qi-bot | [commit] Werner Almesberger: xxx (master) http://qi-hw.com/p/ben-wpan/c705bf0 | 15:55 |
qi-bot | [commit] Stefan Schmidt: spi/atusb: Static info request during probe is async for usb now. (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/1414ef5 | 16:13 |
---|---|---|
qi-bot | [commit] Werner Almesberger: tools/Makefile (BEN_DIRS): comment out dirtpan again, to avoid hdr dependency (master) http://qi-hw.com/p/ben-wpan/673d29a | 19:02 |
qi-bot | [commit] Werner Almesberger: TODO: various updates (master) http://qi-hw.com/p/ben-wpan/d94ac95 | 19:02 |
qi-bot | [commit] Werner Almesberger: fisl2011/: don't declare a sole objective for M1; fixed dependencies (master) http://qi-hw.com/p/wernermisc/0a58e05 | 10:57 |
---|---|---|
qi-bot | [commit] Werner Almesberger: fisl2011/: _really_ fix dependencies (master) http://qi-hw.com/p/wernermisc/450a20a | 10:57 |
qi-bot | [commit] root: fisl2011/: corrected flow.fig; straightened narrative (master) http://qi-hw.com/p/wernermisc/efacc76 | 13:33 |
qi-bot | [commit] root: Merge branch 'master' of git@projects.qi-hardware.com:wernermisc (master) http://qi-hw.com/p/wernermisc/ca5905a | 13:33 |
qi-bot | [commit] root: fisl2011/: changed date; cleaned up flow,fig; improved readability of achieve.fig (master) http://qi-hw.com/p/wernermisc/22ff99b | 16:49 |
qi-bot | [commit] Werner Almesberger: fisl2011/: some screen shots for the talk (master) http://qi-hw.com/p/wernermisc/924bb95 | 08:47 |
---|---|---|
qi-bot | [commit] Werner Almesberger: fisl2011/: added atusb-front.png, in-progress draft of talk (master) http://qi-hw.com/p/wernermisc/6806d65 | 08:47 |
qi-bot | [commit] Werner Almesberger: added openness schievements; more small updates (master) http://qi-hw.com/p/wernermisc/b5f6113 | 08:47 |
qi-bot | [commit] Werner Almesberger: kernel/irq/: EXPORT_SYMBOL_GPL functions for dynamic interrupt allocation (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/5cdcaf4 | 10:27 |
qi-bot | [commit] Werner Almesberger: spi_atben: correct interrupt cleanup order when removing the driver (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/d8bd10a | 10:27 |
qi-bot | [commit] Stefan Schmidt: spi/atusb: Add my copyright and cleanup MODULE macros (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/4af7d80 | 10:27 |
qi-bot | [commit] Stefan Schmidt: spi/atusb: Cleanup header includes (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/a7a8c8e | 10:27 |
qi-bot | [commit] Werner Almesberger: spi_atben: refcount the master (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/d377794 | 10:27 |
qi-bot | [commit] Stefan Schmidt: spi/atusb: Big update and sync with atben driver. (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/42cd2d6 | 10:27 |
qi-bot | [commit] Stefan Schmidt: Merge remote-tracking branch 'origin/ben-wpan' into ben-wpan-stefan (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/4bca4d7 | 10:27 |
qi-bot | [commit] Werner Almesberger: fisl2011/: added product photos (master) http://qi-hw.com/p/wernermisc/d627b26 | 10:27 |
qi-bot | [commit] Werner Almesberger: fisl2011/Makefile: added printing (master) http://qi-hw.com/p/wernermisc/3f8abd4 | 10:27 |
qi-bot | [commit] David Kühling: qemu-host: need to remove whitespace at the end of PKG_MD5SUM (master) http://qi-hw.com/p/openwrt-packages/b44ea50 | 13:31 |
qi-bot | [commit] root: fisl2011/: more updates; merged BOM into misc slide; added workflow (master) http://qi-hw.com/p/wernermisc/354ac92 | 21:57 |
qi-bot | [commit] Stefan Schmidt: spi/atben: Start to rewrite the USB part to be async. (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/85532c8 | 22:59 |
qi-bot | [commit] Werner Almesberger: fisl2011/: more cleanup (master) http://qi-hw.com/p/wernermisc/a94acb5 | 23:34 |
qi-bot | [commit] Werner Almesberger: spi_atben: correct interrupt cleanup order when removing the driver (ben-wpan) http://qi-hw.com/p/qi-kernel/d8bd10a | 00:18 |
---|---|---|
qi-bot | [commit] Werner Almesberger: spi_atben: refcount the master (ben-wpan) http://qi-hw.com/p/qi-kernel/d377794 | 01:22 |
qi-bot | [commit] Werner Almesberger: tools/Makefile (BEN_DIRS): added "dirtpan", so it's now included by default (master) http://qi-hw.com/p/ben-wpan/417d12c | 03:06 |
---|---|---|
qi-bot | [commit] Werner Almesberger: tools/dirtpan/: added statistics collection, SIGUSR1 to dump, SIGUSR2 to reset (master) http://qi-hw.com/p/ben-wpan/0194dc1 | 03:06 |
qi-bot | [commit] David Kühling: new package qemu-host: Qemu user-space emulator for host toolchain (master) http://qi-hw.com/p/openwrt-packages/1d560af | 08:21 |
qi-bot | [commit] David Kühling: emacs: enable second-stage "compilation" (i.e. dumping) via qemu (master) http://qi-hw.com/p/openwrt-packages/ed5db42 | 08:53 |
qi-bot | [commit] David Kühling: emacs: make volume keys work like PageUp/PageDown (master) http://qi-hw.com/p/openwrt-packages/bcb7b64 | 08:53 |
qi-bot | [commit] Werner Almesberger: atusb/fw/Makefile: introduce target-specific compliation variants (master) http://qi-hw.com/p/ben-wpan/6909fc2 | 10:01 |
qi-bot | [commit] Werner Almesberger: atusb/fw/: remove unused items when building the USB driver for the boot loader (master) http://qi-hw.com/p/ben-wpan/8f94984 | 10:01 |
qi-bot | [commit] Werner Almesberger: spi_atben: SPI host specialized for atben (ben-wpan) http://qi-hw.com/p/qi-kernel/31ff13d | 10:25 |
qi-bot | [commit] Werner Almesberger: qi_lb60: changed board setup from atben with spi_gpio to spi_atben (ben-wpan) http://qi-hw.com/p/qi-kernel/36baa2b | 10:25 |
qi-bot | [commit] Werner Almesberger: at86rf230: assorted fixes (ben-wpan) http://qi-hw.com/p/qi-kernel/f0c38be | 10:25 |
qi-bot | [commit] Werner Almesberger: Revert "at86rf230: initialize unused buffers in struct spi_transfer to NULL" (ben-wpan) http://qi-hw.com/p/qi-kernel/01c171f | 10:25 |
qi-bot | [commit] Werner Almesberger: at86rf230: check PHR of inbound packets and make sure frame fits into skb (ben-wpan) http://qi-hw.com/p/qi-kernel/fe7850b | 10:25 |
qi-bot | [commit] Werner Almesberger: spi_atben: added section titles (ben-wpan) http://qi-hw.com/p/qi-kernel/4926b10 | 10:25 |
qi-bot | [commit] Werner Almesberger: spi_atben: moved atben_reset and at86rf230_platform_data from board to driver (ben-wpan) http://qi-hw.com/p/qi-kernel/9a7d79a | 10:25 |
qi-bot | [commit] Werner Almesberger: spi_atben: moved qi_lb60_atben platform device from board to spi_atben (ben-wpan) http://qi-hw.com/p/qi-kernel/00fded8 | 10:25 |
qi-bot | [commit] Werner Almesberger: spi_atben: moved spi_board_info of atben from board to spi_atben (ben-wpan) http://qi-hw.com/p/qi-kernel/b9def22 | 10:25 |
qi-bot | [commit] Werner Almesberger: spi_atben: allocate SPIP bus_num dynamically (ben-wpan) http://qi-hw.com/p/qi-kernel/e08d156 | 10:25 |
qi-bot | [commit] Werner Almesberger: spi_atben: some cleanup (ben-wpan) http://qi-hw.com/p/qi-kernel/3e7de60 | 10:25 |
qi-bot | [commit] Werner Almesberger: spi_atben: announce atben_reset and don't modify global variables (ben-wpan) http://qi-hw.com/p/qi-kernel/add45cd | 10:25 |
qi-bot | [commit] Werner Almesberger: spi_atben: we set prv->board_info.platform_data later, don't mis-initialize (ben-wpan) http://qi-hw.com/p/qi-kernel/8a07eed | 10:25 |
qi-bot | [commit] Werner Almesberger: spi_atben: added optimized unidirectional SPI bitbangers (ben-wpan) http://qi-hw.com/p/qi-kernel/1fe9fab | 10:25 |
qi-bot | [commit] Werner Almesberger: spi_atben: more minor cleanup (ben-wpan) http://qi-hw.com/p/qi-kernel/db90152 | 10:25 |
qi-bot | [commit] Werner Almesberger: spi_atben: removed classifier (ben-wpan) http://qi-hw.com/p/qi-kernel/ccfe8ad | 10:25 |
qi-bot | [commit] Werner Almesberger: spi_atben: added detection of FORCE_TX_ON commands for interrupt synchronization (ben-wpan) http://qi-hw.com/p/qi-kernel/46b0b6b | 10:25 |
qi-bot | [commit] Werner Almesberger: Merge branch 'ben-wpan-atben' into ben-wpan (ben-wpan) http://qi-hw.com/p/qi-kernel/f48f8b9 | 10:25 |
qi-bot | [commit] Werner Almesberger: TODO: updated (master) http://qi-hw.com/p/ben-wpan/865d3bb | 10:25 |
qi-bot | [commit] Werner Almesberger: install/ben-wpan-config-2.6.38: updated for spi_atben driver (master) http://qi-hw.com/p/ben-wpan/0eff158 | 10:25 |
qi-bot | [commit] Werner Almesberger: TODO: update for switch to spi_atben (master) http://qi-hw.com/p/ben-wpan/b3b037e | 10:25 |
qi-bot | [commit] Werner Almesberger: atr86rf230: updated from latest linux-zigbee git (ben-wpan) http://qi-hw.com/p/qi-kernel/a7fdd08 | 13:56 |
qi-bot | [commit] Werner Almesberger: re-applied at96rf230.c part of commit 8684b7aecce3963a04d1aeb9ac4154c0c235791e (ben-wpan) http://qi-hw.com/p/qi-kernel/233a114 | 13:56 |
qi-bot | [commit] Werner Almesberger: spi_atben: cleanup error returns in atben_probe (ben-wpan) http://qi-hw.com/p/qi-kernel/48f628f | 13:56 |
qi-bot | [commit] Werner Almesberger: ub: updated to handle dynamically allocated SPI bus numbers (master) http://qi-hw.com/p/wernermisc/0ee7503 | 22:38 |
qi-bot | [commit] Werner Almesberger: kernel/irq/: EXPORT_SYMBOL_GPL functions for dynamic interrupt allocation (ben-wpan) http://qi-hw.com/p/qi-kernel/5cdcaf4 | 23:37 |
qi-bot | [commit] Werner Almesberger: spi_atben: added section titles (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/4926b10 | 23:38 |
qi-bot | [commit] Werner Almesberger: spi_atben: moved atben_reset and at86rf230_platform_data from board to driver (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/9a7d79a | 23:38 |
qi-bot | [commit] Werner Almesberger: spi_atben: moved qi_lb60_atben platform device from board to spi_atben (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/00fded8 | 23:38 |
qi-bot | [commit] Werner Almesberger: spi_atben: moved spi_board_info of atben from board to spi_atben (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/b9def22 | 23:38 |
qi-bot | [commit] Werner Almesberger: spi_atben: allocate SPIP bus_num dynamically (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/e08d156 | 23:38 |
qi-bot | [commit] Werner Almesberger: spi_atben: some cleanup (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/3e7de60 | 23:38 |
qi-bot | [commit] Werner Almesberger: spi_atben: announce atben_reset and don't modify global variables (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/add45cd | 23:38 |
qi-bot | [commit] Werner Almesberger: spi_atben: we set prv->board_info.platform_data later, don't mis-initialize (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/8a07eed | 23:38 |
qi-bot | [commit] Stefan Schmidt: Merge remote-tracking branch 'origin/ben-wpan-atben' into ben-wpan-stefan (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/42c875a | 23:38 |
qi-bot | [commit] Werner Almesberger: spi_atben: added optimized unidirectional SPI bitbangers (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/1fe9fab | 23:38 |
qi-bot | [commit] Werner Almesberger: spi_atben: more minor cleanup (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/db90152 | 23:38 |
qi-bot | [commit] Stefan Schmidt: Merge remote-tracking branch 'origin/ben-wpan-atben' into ben-wpan-stefan (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/3ce7e2e | 23:38 |
qi-bot | [commit] Stefan Schmidt: kernel/irq: Export IRQ functions we need for the ATUSB build as module (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/562e0da | 23:38 |
qi-bot | [commit] Werner Almesberger: spi_atben: removed classifier (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/ccfe8ad | 23:38 |
qi-bot | [commit] Werner Almesberger: spi_atben: added detection of FORCE_TX_ON commands for interrupt synchronization (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/46b0b6b | 23:38 |
qi-bot | [commit] Werner Almesberger: Merge branch 'ben-wpan-atben' into ben-wpan (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/f48f8b9 | 23:38 |
qi-bot | [commit] Werner Almesberger: atr86rf230: updated from latest linux-zigbee git (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/a7fdd08 | 23:38 |
qi-bot | [commit] Werner Almesberger: re-applied at96rf230.c part of commit 8684b7aecce3963a04d1aeb9ac4154c0c235791e (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/233a114 | 23:38 |
qi-bot | [commit] Werner Almesberger: spi_atben: cleanup error returns in atben_probe (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/48f628f | 23:38 |
qi-bot | [commit] Stefan Schmidt: Merge remote-tracking branch 'origin/ben-wpan' into ben-wpan-stefan (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/904e540 | 23:38 |
qi-bot | [commit] Werner Almesberger: tools/atrf-rssi/: added WLAN channel display (US, EU, and JP) http://qi-hw.com/p/ben-wpan/9af0f93 | 00:54 |
---|---|---|
qi-bot | [commit] Werner Almesberger: tools/atrf-rssi/: added menu for regulation area selection http://qi-hw.com/p/ben-wpan/5392401 | 01:31 |
qi-bot | [commit] Werner Almesberger: Revert "at86rf230: initialize unused buffers in struct spi_transfer to NULL" http://qi-hw.com/p/qi-kernel/01c171f | 03:21 |
qi-bot | [commit] Werner Almesberger: at86rf230: check PHR of inbound packets and make sure frame fits into skb http://qi-hw.com/p/qi-kernel/fe7850b | 03:21 |
qi-bot | [commit] Werner Almesberger: at86rf230: check PHR of inbound packets and make sure frame fits into skb http://qi-hw.com/p/qi-kernel/eb5fe3b | 03:22 |
qi-bot | [commit] Werner Almesberger: spi_atben: added section titles (ben-wpan-atben) http://qi-hw.com/p/qi-kernel/4926b10 | 17:10 |
qi-bot | [commit] Werner Almesberger: spi_atben: moved atben_reset and at86rf230_platform_data from board to driver (ben-wpan-atben) http://qi-hw.com/p/qi-kernel/9a7d79a | 17:10 |
qi-bot | [commit] Werner Almesberger: spi_atben: moved qi_lb60_atben platform device from board to spi_atben (ben-wpan-atben) http://qi-hw.com/p/qi-kernel/00fded8 | 17:10 |
qi-bot | [commit] Werner Almesberger: spi_atben: moved spi_board_info of atben from board to spi_atben (ben-wpan-atben) http://qi-hw.com/p/qi-kernel/b9def22 | 17:10 |
qi-bot | [commit] Werner Almesberger: spi_atben: allocate SPIP bus_num dynamically (ben-wpan-atben) http://qi-hw.com/p/qi-kernel/e08d156 | 17:10 |
qi-bot | [commit] Werner Almesberger: spi_atben: some cleanup (ben-wpan-atben) http://qi-hw.com/p/qi-kernel/3e7de60 | 17:10 |
qi-bot | [commit] Stefan Schmidt: ieee802154/atusb: Remove all ieee802154 informations again. (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/38c3128 | 17:13 |
qi-bot | [commit] Stefan Schmidt: spi/atusb: Initial setup to be a fake spi master driver. (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/5a03c6f | 17:13 |
qi-bot | [commit] Stefan Schmidt: spi/atusb: Move Kconfig and Makefile handling from ieee802154 to spi (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/80b0bda | 17:13 |
qi-bot | [commit] Stefan Schmidt: spi/atusb: Remove the sysfs entry for firmware build version. (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/c704f64 | 17:13 |
qi-bot | [commit] Stefan Schmidt: spi/atusb: Move atusb_id informations to probing as well. (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/f5cd312 | 17:13 |
qi-bot | [commit] Stefan Schmidt: spi/atusb: Clean up error path in probing and removing (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/cba21e8 | 17:13 |
qi-bot | [commit] Werner Almesberger: spi_atben: announce atben_reset and don't modify global variables (ben-wpan-atben) http://qi-hw.com/p/qi-kernel/add45cd | 18:41 |
qi-bot | [commit] Werner Almesberger: spi_atben: we set prv->board_info.platform_data later, don't mis-initialize (ben-wpan-atben) http://qi-hw.com/p/qi-kernel/8a07eed | 18:54 |
qi-bot | [commit] Stefan Schmidt: spi/atusb: Add RF reset function. (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/bbcabbe | 19:38 |
qi-bot | [commit] Stefan Schmidt: spi/atusb: Move interface ignore function to the beginning of the probe function (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/b7cfe70 | 19:38 |
qi-bot | [commit] Stefan Schmidt: spi/atusb: Mimic atben on the latest changes for spi master. (ben-wpan-stefan) http://qi-hw.com/p/qi-kernel/bf166fe | 19:38 |
qi-bot | [commit] Werner Almesberger: spi_atben: added optimized unidirectional SPI bitbangers (ben-wpan-atben) http://qi-hw.com/p/qi-kernel/1fe9fab | 21:28 |
qi-bot | [commit] Werner Almesberger: spi_atben: more minor cleanup (ben-wpan-atben) http://qi-hw.com/p/qi-kernel/db90152 | 21:45 |
qi-bot | [commit] Werner Almesberger: spi_atben: removed classifier (ben-wpan-atben) http://qi-hw.com/p/qi-kernel/ccfe8ad | 23:29 |
qi-bot | [commit] Werner Almesberger: spi_atben: added detection of FORCE_TX_ON commands for interrupt synchronization (ben-wpan-atben) http://qi-hw.com/p/qi-kernel/46b0b6b | 23:29 |
qi-bot | [commit] Werner Almesberger: at86rf230: assorted fixes http://qi-hw.com/p/qi-kernel/06f03a7 | 03:24 |
---|---|---|
qi-bot | [commit] Stefan Schmidt: ieee802154/atusb: Update command enum and comment. http://qi-hw.com/p/qi-kernel/047c9c8 | 23:40 |
qi-bot | [commit] David Kühling: toolchain/gcc: add option SJLJ_EXCEPTIONS to select gcc's exception handling http://qi-hw.com/p/openwrt-xburst/2c58e58 | 09:58 |
---|---|---|
qi-bot | [commit] David Kühling: config.full_system: enable SJLJ_EXCEPTIONS to workaround toolchain bugs http://qi-hw.com/p/openwrt-packages/b8736d6 | 10:30 |
qi-bot | [commit] Werner Almesberger: atusb/fw/: aggregate interrupts while waiting http://qi-hw.com/p/ben-wpan/27fc0a0 | 12:44 |
qi-bot | [commit] kyak: config.full_system: enable mtd-utils-* http://qi-hw.com/p/openwrt-packages/6cf325e | 12:50 |
qi-bot | [commit] David Kühling: gmenu2x: update to use latest revision from git http://qi-hw.com/p/openwrt-packages/238cd35 | 14:04 |
qi-bot | [commit] David Kühling: ase: use libjpeg,libz,libpng,libfreetype from openwrt instead of included ones http://qi-hw.com/p/openwrt-packages/cbb09a5 | 14:42 |
qi-bot | [commit] jow: [toolchain] introduce option to enable setjump()/longjump() based C++ exceptions (#9185, patch from David Kuehling via Qi hardware) http://qi-hw.com/p/openwrt-xburst/814de68 | 15:45 |
qi-bot | [commit] jow: [toolchain] add gfortran compiler support (#9600, patch from Xiangfu Liu via Qi hardware) http://qi-hw.com/p/openwrt-xburst/63ef78f | 15:45 |
qi-bot | [commit] mirko: [toolchain/eglibc] manual/Makefile: Don't mix pattern rules with normal rules. http://qi-hw.com/p/openwrt-xburst/cdc9ae5 | 15:45 |
qi-bot | [commit] mirko: [package/hotplug2] fix conditional dependencies to libbsd http://qi-hw.com/p/openwrt-xburst/b7bfccb | 15:45 |
qi-bot | [commit] Mirko Vogt: add <http://downloads.qi-hardware.com/software/mirror-openwrt-sources/> http://qi-hw.com/p/openwrt-xburst/c724813 | 15:45 |
qi-bot | [commit] Xiangfu Liu: optimize for ben nanonote http://qi-hw.com/p/openwrt-xburst/4fbcfcb | 15:45 |
qi-bot | [commit] Xiangfu Liu: [xburst] Improve mounttime http://qi-hw.com/p/openwrt-xburst/84a97b0 | 15:45 |
qi-bot | [commit] Xiangfu Liu: nanonote optimize http://qi-hw.com/p/openwrt-xburst/4f0e8bb | 15:45 |
qi-bot | [commit] kyak: add kernel patch for setfont2 http://qi-hw.com/p/openwrt-xburst/5552f9d | 15:45 |
qi-bot | [commit] Xiangfu Liu: optimize for ben nanonote http://qi-hw.com/p/openwrt-xburst/977f8d2 | 15:45 |
qi-bot | [commit] kyak: config-2.6.37: enable battery, disable RNDIS http://qi-hw.com/p/openwrt-xburst/8b9adc1 | 15:45 |
qi-bot | [commit] kyak: patches-2.6.37: support for Ben NAND partitioning http://qi-hw.com/p/openwrt-xburst/05361e7 | 15:45 |
qi-bot | [commit] David Kühling: linux kernel: add CONFIG_PROC_PAGE_MONITOR=y to allow for clean user-space DMA http://qi-hw.com/p/openwrt-xburst/e364a13 | 15:45 |
qi-bot | [commit] kyak: config-2.6.37: enable options needed for keymouse http://qi-hw.com/p/openwrt-xburst/9c17987 | 15:45 |
qi-bot | [commit] kyak: trunk: fix kernel keymap for VolUp/Down and Del http://qi-hw.com/p/openwrt-xburst/8c5f57a | 15:45 |
qi-bot | [commit] kyak: trunk: build sound modules in kernel http://qi-hw.com/p/openwrt-xburst/63b7c82 | 15:45 |
qi-bot | [commit] kyak: trunk: add ks7010 support patch http://qi-hw.com/p/openwrt-xburst/06a3076 | 15:45 |
qi-bot | [commit] Xiangfu Liu: base-files, move it to openwrt-package/nanonote-files http://qi-hw.com/p/openwrt-xburst/5486ce2 | 15:45 |
qi-bot | [commit] kyak: Disable syslogd and klogd http://qi-hw.com/p/openwrt-xburst/9a18096 | 15:45 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: update to 2010.06 http://qi-hw.com/p/openwrt-xburst/c8f7f0d | 15:45 |
qi-bot | [commit] Werner Almesberger: atusb/fw/board_app.c: do not read and accumulate IRQs; flash LED when EP1 busy http://qi-hw.com/p/ben-wpan/23c5922 | 16:21 |
qi-bot | [commit] Werner Almesberger: tools/lib/atusb-common.c: updated for new interrupt handling in firmware http://qi-hw.com/p/ben-wpan/8a2d80a | 16:21 |
qi-bot | [commit] Werner Almesberger: tools/lib/misctxrx.c (wait_for_interrupt): enforce a minimum timeout of 10 ms http://qi-hw.com/p/ben-wpan/d8363d8 | 16:21 |
qi-bot | [commit] Werner Almesberger: tools/atrf-xmit/atrf-xmit.c: cleaned up timeouts and interrupt polling http://qi-hw.com/p/ben-wpan/7c12bf0 | 16:21 |
qi-bot | [commit] kyak: fix postinstall sections of fbterm and nightsky http://qi-hw.com/p/openwrt-packages/3e633e9 | 19:10 |
qi-bot | [commit] jow: [package] hotplug2: make libbsd depend on "not uclibc" for now, the conditional depdendency handling needs fixes http://qi-hw.com/p/openwrt-xburst/b6b061e | 19:27 |
qi-bot | [commit] Mirko Vogt: add <http://downloads.qi-hardware.com/software/mirror-openwrt-sources/> http://qi-hw.com/p/openwrt-xburst/abe4635 | 19:27 |
qi-bot | [commit] Xiangfu Liu: optimize for ben nanonote http://qi-hw.com/p/openwrt-xburst/54388fe | 19:27 |
qi-bot | [commit] Xiangfu Liu: [xburst] Improve mounttime http://qi-hw.com/p/openwrt-xburst/7b31e48 | 19:27 |
qi-bot | [commit] Xiangfu Liu: nanonote optimize http://qi-hw.com/p/openwrt-xburst/20ac0a4 | 19:27 |
qi-bot | [commit] kyak: add kernel patch for setfont2 http://qi-hw.com/p/openwrt-xburst/3bc6720 | 19:27 |
qi-bot | [commit] Xiangfu Liu: optimize for ben nanonote http://qi-hw.com/p/openwrt-xburst/62d85e5 | 19:27 |
qi-bot | [commit] kyak: config-2.6.37: enable battery, disable RNDIS http://qi-hw.com/p/openwrt-xburst/6d6c7e9 | 19:27 |
qi-bot | [commit] kyak: patches-2.6.37: support for Ben NAND partitioning http://qi-hw.com/p/openwrt-xburst/4c5a117 | 19:27 |
qi-bot | [commit] David Kühling: linux kernel: add CONFIG_PROC_PAGE_MONITOR=y to allow for clean user-space DMA http://qi-hw.com/p/openwrt-xburst/3953784 | 19:27 |
qi-bot | [commit] kyak: config-2.6.37: enable options needed for keymouse http://qi-hw.com/p/openwrt-xburst/f8612b5 | 19:27 |
qi-bot | [commit] kyak: trunk: fix kernel keymap for VolUp/Down and Del http://qi-hw.com/p/openwrt-xburst/f6712ec | 19:27 |
qi-bot | [commit] kyak: trunk: build sound modules in kernel http://qi-hw.com/p/openwrt-xburst/67667b1 | 19:27 |
qi-bot | [commit] kyak: trunk: add ks7010 support patch http://qi-hw.com/p/openwrt-xburst/0c8db99 | 19:27 |
qi-bot | [commit] Xiangfu Liu: base-files, move it to openwrt-package/nanonote-files http://qi-hw.com/p/openwrt-xburst/4c947ee | 19:27 |
qi-bot | [commit] kyak: Disable syslogd and klogd http://qi-hw.com/p/openwrt-xburst/ea6dd03 | 19:27 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: update to 2010.06 http://qi-hw.com/p/openwrt-xburst/1717418 | 19:27 |
qi-bot | [commit] jow: [scripts] metadata.pl: fix handling of multiple conditional depends that reference the same package (exposed by previous hotplug2 changes), also kill duplicate dependency specs while we're at it http://qi-hw.com/p/openwrt-xburst/8d14610 | 19:31 |
qi-bot | [commit] Mirko Vogt: add <http://downloads.qi-hardware.com/software/mirror-openwrt-sources/> http://qi-hw.com/p/openwrt-xburst/269ffae | 19:31 |
qi-bot | [commit] Xiangfu Liu: optimize for ben nanonote http://qi-hw.com/p/openwrt-xburst/a1506c8 | 19:31 |
qi-bot | [commit] Xiangfu Liu: [xburst] Improve mounttime http://qi-hw.com/p/openwrt-xburst/103eec5 | 19:31 |
qi-bot | [commit] Xiangfu Liu: nanonote optimize http://qi-hw.com/p/openwrt-xburst/d6bbf43 | 19:31 |
qi-bot | [commit] kyak: add kernel patch for setfont2 http://qi-hw.com/p/openwrt-xburst/dd4a76e | 19:31 |
qi-bot | [commit] Xiangfu Liu: optimize for ben nanonote http://qi-hw.com/p/openwrt-xburst/d30f3a9 | 19:31 |
qi-bot | [commit] kyak: config-2.6.37: enable battery, disable RNDIS http://qi-hw.com/p/openwrt-xburst/da7f01a | 19:31 |
qi-bot | [commit] kyak: patches-2.6.37: support for Ben NAND partitioning http://qi-hw.com/p/openwrt-xburst/d43df82 | 19:31 |
qi-bot | [commit] David Kühling: linux kernel: add CONFIG_PROC_PAGE_MONITOR=y to allow for clean user-space DMA http://qi-hw.com/p/openwrt-xburst/7fbc3a0 | 19:31 |
qi-bot | [commit] kyak: config-2.6.37: enable options needed for keymouse http://qi-hw.com/p/openwrt-xburst/fe7c08d | 19:31 |
qi-bot | [commit] kyak: trunk: fix kernel keymap for VolUp/Down and Del http://qi-hw.com/p/openwrt-xburst/64937ed | 19:31 |
qi-bot | [commit] kyak: trunk: build sound modules in kernel http://qi-hw.com/p/openwrt-xburst/0aa9a55 | 19:31 |
qi-bot | [commit] kyak: trunk: add ks7010 support patch http://qi-hw.com/p/openwrt-xburst/ea26e02 | 19:31 |
qi-bot | [commit] Xiangfu Liu: base-files, move it to openwrt-package/nanonote-files http://qi-hw.com/p/openwrt-xburst/82e90b8 | 19:31 |
qi-bot | [commit] kyak: Disable syslogd and klogd http://qi-hw.com/p/openwrt-xburst/84c0548 | 19:31 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: update to 2010.06 http://qi-hw.com/p/openwrt-xburst/f280002 | 19:31 |
qi-bot | [commit] kyak: really fix postinst for fbterm, lingot, nightsky http://qi-hw.com/p/openwrt-packages/7fbd519 | 19:41 |
qi-bot | [commit] Stefan Schmidt: ieee802154/atusb: Print out the fimrware build information during probe. http://qi-hw.com/p/qi-kernel/72c7c17 | 20:23 |
qi-bot | [commit] Xiangfu Liu: libsdl-gfx: copy the missing .pc files, thanks Jiva http://qi-hw.com/p/openwrt-packages/51fc69f | 01:36 |
---|---|---|
qi-bot | [commit] hauke: firmware-utils: fix build on big endian systems http://qi-hw.com/p/openwrt-xburst/bf48bee | 11:55 |
qi-bot | [commit] jow: [include] cmake.mk: fix bogus values for FIND_ROOT_PATH_MODE_*; kept plplot from compiling (#9573) http://qi-hw.com/p/openwrt-xburst/0fba51d | 11:55 |
qi-bot | [commit] Mirko Vogt: add <http://downloads.qi-hardware.com/software/mirror-openwrt-sources/> http://qi-hw.com/p/openwrt-xburst/7fdf51f | 11:55 |
qi-bot | [commit] Xiangfu Liu: optimize for ben nanonote http://qi-hw.com/p/openwrt-xburst/10b92a7 | 11:55 |
qi-bot | [commit] Xiangfu Liu: [xburst] Improve mounttime http://qi-hw.com/p/openwrt-xburst/aaa1f52 | 11:55 |
qi-bot | [commit] Xiangfu Liu: nanonote optimize http://qi-hw.com/p/openwrt-xburst/47bf3ac | 11:55 |
qi-bot | [commit] Xiangfu Liu: Add-gfortran-compiler-support-to-the-toolchain http://qi-hw.com/p/openwrt-xburst/5d89d8a | 11:55 |
qi-bot | [commit] kyak: add kernel patch for setfont2 http://qi-hw.com/p/openwrt-xburst/df3fa8b | 11:55 |
qi-bot | [commit] Xiangfu Liu: optimize for ben nanonote http://qi-hw.com/p/openwrt-xburst/f15aaa5 | 11:55 |
qi-bot | [commit] kyak: config-2.6.37: enable battery, disable RNDIS http://qi-hw.com/p/openwrt-xburst/3415136 | 11:55 |
qi-bot | [commit] kyak: patches-2.6.37: support for Ben NAND partitioning http://qi-hw.com/p/openwrt-xburst/e4c52ef | 11:55 |
qi-bot | [commit] David Kühling: linux kernel: add CONFIG_PROC_PAGE_MONITOR=y to allow for clean user-space DMA http://qi-hw.com/p/openwrt-xburst/ce9677e | 11:55 |
qi-bot | [commit] kyak: config-2.6.37: enable options needed for keymouse http://qi-hw.com/p/openwrt-xburst/9e25226 | 11:55 |
qi-bot | [commit] kyak: trunk: fix kernel keymap for VolUp/Down and Del http://qi-hw.com/p/openwrt-xburst/0cc25e6 | 11:55 |
qi-bot | [commit] kyak: trunk: build sound modules in kernel http://qi-hw.com/p/openwrt-xburst/b0931b8 | 11:55 |
qi-bot | [commit] kyak: trunk: add ks7010 support patch http://qi-hw.com/p/openwrt-xburst/fa3d469 | 11:55 |
qi-bot | [commit] Xiangfu Liu: base-files, move it to openwrt-package/nanonote-files http://qi-hw.com/p/openwrt-xburst/bdec59d | 11:55 |
qi-bot | [commit] kyak: uboot-xburst: don't install empty dir http://qi-hw.com/p/openwrt-xburst/9a27871 | 11:55 |
qi-bot | [commit] kyak: Disable syslogd and klogd http://qi-hw.com/p/openwrt-xburst/9f1d7f1 | 11:55 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: update to 2010.06 http://qi-hw.com/p/openwrt-xburst/a2997e2 | 11:55 |
qi-bot | [commit] Werner Almesberger: at86rf230: RX vs. TX synchronization, further corrections http://qi-hw.com/p/qi-kernel/fd8fe53 | 15:49 |
qi-bot | [commit] Werner Almesberger: atusb/fw/usb/: added support for bulk IN EP 1 http://qi-hw.com/p/ben-wpan/244e449 | 00:31 |
---|---|---|
qi-bot | [commit] Werner Almesberger: atusb/fw/: added reporting of RF interrupts via bulk EP1 http://qi-hw.com/p/ben-wpan/0120f62 | 00:31 |
qi-bot | [commit] Werner Almesberger: libatrf: new function atrf_interrupt_wait for interrupt-driven wait for interrupt http://qi-hw.com/p/ben-wpan/e6f0a1d | 00:31 |
qi-bot | [commit] Werner Almesberger: tools/lib/: added interrupt_wait support to atusb and atusb-spi driver http://qi-hw.com/p/ben-wpan/110ecf6 | 00:31 |
qi-bot | [commit] Werner Almesberger: libatrf: new function to reliably flush interrupts http://qi-hw.com/p/ben-wpan/620709a | 00:31 |
qi-bot | [commit] Werner Almesberger: tools/: updated tools to use flush_interrupts http://qi-hw.com/p/ben-wpan/b0dd5ce | 00:31 |
qi-bot | [commit] Werner Almesberger: tools/: added interrupt_wait support to atnet and atrf-proxy (untested) http://qi-hw.com/p/ben-wpan/668d8c6 | 00:31 |
qi-bot | [commit] Werner Almesberger: tools/atrf-xmit/atrf-xmit.c: corrected title comment http://qi-hw.com/p/ben-wpan/106ef7f | 00:31 |
qi-bot | [commit] Werner Almesberger: tools/lib/timeout.h, tools/lib/timeout.c: added timeout/deadline functions http://qi-hw.com/p/ben-wpan/4d4cec6 | 00:31 |
qi-bot | [commit] Werner Almesberger: tools/lib/atben.c: added support for interrupt_wait (polled) http://qi-hw.com/p/ben-wpan/55354c7 | 00:31 |
qi-bot | [commit] Werner Almesberger: tools/: major overhaul of wait_for_interrupt; uses atrf_interrupt_wait now http://qi-hw.com/p/ben-wpan/b4a6e8e | 00:31 |
qi-bot | [commit] Werner Almesberger: atrf-xmit/atrf-xmit.c: updated to no longer use atrf_interrupt http://qi-hw.com/p/ben-wpan/b7276d2 | 00:31 |
qi-bot | [commit] Werner Almesberger: tools/lib/atben.c (atben_interrupt_wait): complain about stray interrupts http://qi-hw.com/p/ben-wpan/9952a20 | 00:31 |
qi-bot | [commit] Werner Almesberger: tools/lib/misctxrx.c (flush_interrupts): don't fall back to reading IRQ_STATUS http://qi-hw.com/p/ben-wpan/76707d6 | 00:31 |
qi-bot | [commit] Werner Almesberger: atusb/fw/: disable INT0 if manipulating GPIOs (tentative) http://qi-hw.com/p/ben-wpan/12fef1b | 00:31 |
qi-bot | [commit] Werner Almesberger: tools/: the great removal of atrf_interrupt http://qi-hw.com/p/ben-wpan/d0fb1a8 | 00:31 |
qi-bot | [commit] Werner Almesberger: libatrf: simplify use of atrf_interrupt_wait now this it is mandatory http://qi-hw.com/p/ben-wpan/10b6d88 | 00:31 |
qi-bot | [commit] Werner Almesberger: tools/lib/atben.c (atben_interrupt_wait): don't time out if timeout_ms == 0 http://qi-hw.com/p/ben-wpan/70715a1 | 02:16 |
qi-bot | [commit] Werner Almesberger: tools/atrf-proxy/: make WAIT 0 wait forever http://qi-hw.com/p/ben-wpan/f4ca3ae | 02:16 |
qi-bot | [commit] Werner Almesberger: prod/atusb (led): show keys to press in reverse http://qi-hw.com/p/ben-wpan/b2c7727 | 02:16 |
qi-bot | [commit] Werner Almesberger: tools/lib/misctxrx.c (wait_for_interrupt): don't fragment timeouts http://qi-hw.com/p/ben-wpan/cb20c55 | 02:16 |
qi-bot | [commit] Werner Almesberger: tools/lib/atusb-common.c (atusb_interrupt_wait): don't try to pull more irqs http://qi-hw.com/p/ben-wpan/f8f2f89 | 02:16 |
qi-bot | [commit] Werner Almesberger: atusb/fw/: new request ATUSB_GPIO_CLEANUP to re-enable INT0 http://qi-hw.com/p/ben-wpan/f7b9a18 | 02:16 |
qi-bot | [commit] Werner Almesberger: tools/atrf-gpio/atusb.c (restore_gpios): send ATUSB_GPIO_CLEANUP http://qi-hw.com/p/ben-wpan/b0b04ed | 02:16 |
qi-bot | [commit] David Kühling: alex4: use left shift as fire key (left control missing on Nanonote) http://qi-hw.com/p/openwrt-packages/af0b29d | 06:27 |
qi-bot | [commit] Xiangfu Liu: gtkguitune, swap left and right interface patch http://qi-hw.com/p/openwrt-packages/221303d | 06:27 |
qi-bot | [commit] Xiangfu Liu: nanonote-files: reflash_ben.sh using -O in wget http://qi-hw.com/p/openwrt-packages/3ecb2ca | 06:27 |
qi-bot | [commit] David Kühling: alex4: move save-files to ~/.alex4.* http://qi-hw.com/p/openwrt-packages/7d8785d | 06:27 |
qi-bot | [commit] David Kühling: octave: fix fortran compile flags, enable parallel compilation http://qi-hw.com/p/openwrt-packages/c33acf0 | 06:27 |
qi-bot | [commit] David Kühling: plplot: make compile again with openwrt trunk; switch to using cmake.mk http://qi-hw.com/p/openwrt-packages/01b5b15 | 06:27 |
qi-bot | [commit] David Kühling: new package: ASE: allegro sprite editor, a generic drawing and animation program http://qi-hw.com/p/openwrt-packages/6829840 | 06:27 |
qi-bot | [commit] David Kühling: ase: hack gui to emulate mouse via keyboard; change keymap to not interfere. http://qi-hw.com/p/openwrt-packages/5c9e2b8 | 06:27 |
qi-bot | [commit] David Kühling: ase: improved keyboard-mouse support: filter out arrow keys unless shift pressed http://qi-hw.com/p/openwrt-packages/33f9a73 | 06:27 |
qi-bot | [commit] David Kühling: liballegro: fix keyboard driver issues with nanonote's Fn key http://qi-hw.com/p/openwrt-packages/47a2f3f | 06:27 |
qi-bot | [commit] David Kühling: liballegro: yet another keyboard fix for 'Fn' key. http://qi-hw.com/p/openwrt-packages/0244a53 | 06:27 |
qi-bot | [commit] David Kühling: ase: fix handling detection of number keys for zoom, ignore 'Fn' (LCONTROL) http://qi-hw.com/p/openwrt-packages/33eec1c | 06:27 |
qi-bot | [commit] David Kühling: liballegro: make the fbcon fixes really water-tight (fix really all cases). http://qi-hw.com/p/openwrt-packages/a82661f | 06:27 |
qi-bot | [commit] David Kühling: config.full_system (on trunk): add liballegro, alex4 and ASE (aseprite) http://qi-hw.com/p/openwrt-packages/f0b4b19 | 06:27 |
qi-bot | [commit] David Kühling: config.full_system (on trunk): enable libdumb, needed by alex4 http://qi-hw.com/p/openwrt-packages/a84f7d3 | 06:27 |
qi-bot | [commit] kyak: Store/restore alsa settings correctly. http://qi-hw.com/p/openwrt-packages/ec8d8f8 | 06:27 |
qi-bot | [commit] kyak: dega: add md5sum for tarball http://qi-hw.com/p/openwrt-packages/d8162a7 | 06:27 |
qi-bot | [commit] David Kühling: liballegro: change the keybord driver fix to tread RCONTROL as before (as CTRL) http://qi-hw.com/p/openwrt-packages/026792a | 06:27 |
qi-bot | [commit] David Kühling: ase: another keymouse fix: keep F1-F3 mouse-buttons from causing key events. http://qi-hw.com/p/openwrt-packages/cd0c7ce | 06:27 |
qi-bot | [commit] kyak: vitetris: terminal-based Tetris clone http://qi-hw.com/p/openwrt-packages/c8ada0d | 06:27 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: update to 2010.06 http://qi-hw.com/p/openwrt-xburst/bf95bd7 | 07:57 |
qi-bot | [commit] Mirko Vogt: add <http://downloads.qi-hardware.com/software/mirror-openwrt-sources/> http://qi-hw.com/p/openwrt-xburst/a37eea9 | 08:01 |
qi-bot | [commit] Xiangfu Liu: optimize for ben nanonote http://qi-hw.com/p/openwrt-xburst/0f43545 | 08:01 |
qi-bot | [commit] Xiangfu Liu: [xburst] Improve mounttime http://qi-hw.com/p/openwrt-xburst/c868d46 | 08:01 |
qi-bot | [commit] Xiangfu Liu: nanonote optimize http://qi-hw.com/p/openwrt-xburst/c1dba4c | 08:01 |
qi-bot | [commit] Xiangfu Liu: Add-gfortran-compiler-support-to-the-toolchain http://qi-hw.com/p/openwrt-xburst/cf4b099 | 08:01 |
qi-bot | [commit] kyak: add kernel patch for setfont2 http://qi-hw.com/p/openwrt-xburst/dd385c4 | 08:01 |
qi-bot | [commit] Xiangfu Liu: optimize for ben nanonote http://qi-hw.com/p/openwrt-xburst/797be6b | 08:01 |
qi-bot | [commit] kyak: config-2.6.37: enable battery, disable RNDIS http://qi-hw.com/p/openwrt-xburst/a3d8a8b | 08:01 |
qi-bot | [commit] kyak: patches-2.6.37: support for Ben NAND partitioning http://qi-hw.com/p/openwrt-xburst/83f076a | 08:01 |
qi-bot | [commit] David Kühling: linux kernel: add CONFIG_PROC_PAGE_MONITOR=y to allow for clean user-space DMA http://qi-hw.com/p/openwrt-xburst/fbaf655 | 08:01 |
qi-bot | [commit] kyak: config-2.6.37: enable options needed for keymouse http://qi-hw.com/p/openwrt-xburst/e74aa2b | 08:01 |
qi-bot | [commit] kyak: trunk: fix kernel keymap for VolUp/Down and Del http://qi-hw.com/p/openwrt-xburst/b35d1cf | 08:01 |
qi-bot | [commit] kyak: trunk: build sound modules in kernel http://qi-hw.com/p/openwrt-xburst/0942c36 | 08:01 |
qi-bot | [commit] kyak: trunk: add ks7010 support patch http://qi-hw.com/p/openwrt-xburst/5e6fcae | 08:01 |
qi-bot | [commit] Xiangfu Liu: base-files, move it to openwrt-package/nanonote-files http://qi-hw.com/p/openwrt-xburst/cbc84e1 | 08:01 |
qi-bot | [commit] kyak: uboot-xburst: don't install empty dir http://qi-hw.com/p/openwrt-xburst/bce1b8d | 08:01 |
qi-bot | [commit] kyak: Disable syslogd and klogd http://qi-hw.com/p/openwrt-xburst/467647c | 08:01 |
qi-bot | [commit] David Kühling: Merge branch 'trunk' of projects.qi-hardware.com:openwrt-xburst into trunk http://qi-hw.com/p/openwrt-xburst/3ab1444 | 08:01 |
qi-bot | [commit] David Kühling: cmake.mk: fix bogus values for FIND_ROOT_PATH_MODE_*; kept plplot from compiling http://qi-hw.com/p/openwrt-xburst/e1cbfbf | 08:01 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: update to 2010.06 http://qi-hw.com/p/openwrt-xburst/bf95bd7 | 08:01 |
qi-bot | [commit] Werner Almesberger: TODO: updated with current tasks http://qi-hw.com/p/ben-wpan/15db279 | 12:25 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: USB: Fix packet read/write functions. http://qi-hw.com/p/qi-kernel/9979345 | 12:09 |
---|---|---|
qi-bot | [commit] Werner Almesberger: atusb/fw/ep0.c (my_setup): fixed test for ATUSB_SPI_READ2 http://qi-hw.com/p/ben-wpan/3f74098 | 16:44 |
qi-bot | [commit] David Kühling: liballegro: change the keybord driver fix to tread RCONTROL as before (as CTRL) http://qi-hw.com/p/openwrt-packages/026792a | 10:30 |
---|---|---|
qi-bot | [commit] David Kühling: ase: another keymouse fix: keep F1-F3 mouse-buttons from causing key events. http://qi-hw.com/p/openwrt-packages/cd0c7ce | 10:37 |
qi-bot | [commit] Werner Almesberger: BOOKSHELF: added RFC4944 (6LoWPAN) as "rfc4944" and "6lowpan" http://qi-hw.com/p/ben-wpan/2966470 | 11:43 |
qi-bot | [commit] Werner Almesberger: tools/dirtpan/dirtpan.c: cleaned up embarrassing explanation of control byte http://qi-hw.com/p/ben-wpan/e77658f | 11:43 |
qi-bot | [commit] kyak: vitetris: terminal-based Tetris clone http://qi-hw.com/p/openwrt-packages/c8ada0d | 13:26 |
qi-bot | [commit] Werner Almesberger: tools/lib/atusb.c: added missing standard #includes http://qi-hw.com/p/ben-wpan/9746205 | 18:50 |
qi-bot | [commit] Werner Almesberger: tools/lib/: split non-SPI code from atusb.c in preparation for SPI-based driver http://qi-hw.com/p/ben-wpan/13f031b | 18:50 |
qi-bot | [commit] Werner Almesberger: atusb/fw/: new mechanism for SPI commands (more general than reg/buf requests) http://qi-hw.com/p/ben-wpan/9a0184c | 18:50 |
qi-bot | [commit] Werner Almesberger: tools/lib: added USB-SPI driver for ATUSB http://qi-hw.com/p/ben-wpan/a37bba8 | 18:50 |
qi-bot | [commit] Benson Leung: gpio-charger: Add gpio_charger_resume http://qi-hw.com/p/qi-kernel/8e7191d | 06:50 |
---|---|---|
qi-bot | [commit] Lars-Peter Clausen: udc http://qi-hw.com/p/qi-kernel/6960c45 | 06:50 |
qi-bot | [commit] Lars-Peter Clausen: jz4740: Fix compile error http://qi-hw.com/p/qi-kernel/7968eee | 06:50 |
qi-bot | [commit] Werner Almesberger: Merge branch 'jz-2.6.38' of projects.qi-hardware.com:qi-kernel into ben-wpan http://qi-hw.com/p/qi-kernel/fb18b4e | 06:50 |
qi-bot | [commit] Werner Almesberger: at86rf230.c: synchronized with latest changes from linux-zigbee http://qi-hw.com/p/qi-kernel/8651503 | 06:50 |
qi-bot | [commit] kyak: Store/restore alsa settings correctly. http://qi-hw.com/p/openwrt-packages/ec8d8f8 | 08:05 |
---|---|---|
qi-bot | [commit] kyak: dega: add md5sum for tarball http://qi-hw.com/p/openwrt-packages/d8162a7 | 08:27 |
qi-bot | [commit] Stefan Schmidt: usb/dfu.h: Include usb.h to avoid gcc warning http://qi-hw.com/p/ben-wpan/a48c6dc | 15:02 |
qi-bot | [commit] Werner Almesberger: at86rf230: straighten out RX vs. TX synchronization http://qi-hw.com/p/qi-kernel/5b8a926 | 00:46 |
---|---|---|
qi-bot | [commit] David Kühling: ase: improved keyboard-mouse support: filter out arrow keys unless shift pressed http://qi-hw.com/p/openwrt-packages/33f9a73 | 10:47 |
qi-bot | [commit] David Kühling: liballegro: fix keyboard driver issues with nanonote's Fn key http://qi-hw.com/p/openwrt-packages/47a2f3f | 11:49 |
qi-bot | [commit] David Kühling: liballegro: yet another keyboard fix for 'Fn' key. http://qi-hw.com/p/openwrt-packages/0244a53 | 19:02 |
qi-bot | [commit] David Kühling: ase: fix handling detection of number keys for zoom, ignore 'Fn' (LCONTROL) http://qi-hw.com/p/openwrt-packages/33eec1c | 20:10 |
qi-bot | [commit] David Kühling: liballegro: make the fbcon fixes really water-tight (fix really all cases). http://qi-hw.com/p/openwrt-packages/a82661f | 20:15 |
qi-bot | [commit] David Kühling: config.full_system (on trunk): add liballegro, alex4 and ASE (aseprite) http://qi-hw.com/p/openwrt-packages/f0b4b19 | 20:46 |
qi-bot | [commit] David Kühling: config.full_system (on trunk): enable libdumb, needed by alex4 http://qi-hw.com/p/openwrt-packages/a84f7d3 | 20:48 |
qi-bot | [commit] Werner Almesberger: web/: Ben-WPAN overview page http://qi-hw.com/p/ben-wpan/ea7103e | 04:55 |
---|---|---|
qi-bot | [commit] Werner Almesberger: web/Makefile: also upload the ~800 pixels images http://qi-hw.com/p/ben-wpan/394ca56 | 05:02 |
qi-bot | [commit] Werner Almesberger: web/: added zoomed-in view of atusb in action http://qi-hw.com/p/ben-wpan/7e1b47b | 06:23 |
qi-bot | [commit] Werner Almesberger: web/index.html: removed duplicate IMG tag http://qi-hw.com/p/ben-wpan/cce7810 | 06:23 |
qi-bot | [commit] kyak: Revert "config.full_system: add liballegro stuff into image (=y>, not as module (=m)" http://qi-hw.com/p/openwrt-packages/07fdef0 | 05:10 |
---|---|---|
qi-bot | [commit] Benson Leung: gpio-charger: Add gpio_charger_resume http://qi-hw.com/p/qi-kernel/0b8eee2 | 12:07 |
qi-bot | [commit] Lars-Peter Clausen: udc http://qi-hw.com/p/qi-kernel/ef7f1fc | 12:07 |
qi-bot | [commit] Lars-Peter Clausen: jz4740: Fix compile error http://qi-hw.com/p/qi-kernel/1c110d7 | 12:07 |
qi-bot | [commit] Maarten ter Huurne: MIPS: JZ4740: USB: Fix packet read/write functions. http://qi-hw.com/p/qi-kernel/29cacc9 | 12:07 |
qi-bot | [commit] Werner Almesberger: at86rf230: move register and protocol definitions to header file http://qi-hw.com/p/qi-kernel/b213088 | 12:07 |
qi-bot | [commit] Werner Almesberger: at86rf230: remove irq_disabled flag and clean up IRQ freeing http://qi-hw.com/p/qi-kernel/41fca64 | 12:07 |
qi-bot | [commit] David Kühling: cmake.mk: fix bogus values for FIND_ROOT_PATH_MODE_*; kept plplot from compiling http://qi-hw.com/p/openwrt-xburst/e1cbfbf | 16:07 |
qi-bot | [commit] David Kühling: add icon and starter for ASE (aseprite) image/animation editor http://qi-hw.com/p/gmenu2x/31e1f3c | 21:13 |
qi-bot | [commit] David Kühling: ase: hack gui to emulate mouse via keyboard; change keymap to not interfere. http://qi-hw.com/p/openwrt-packages/5c9e2b8 | 21:52 |
qi-bot | [commit] David Kühling: new package: ASE: allegro sprite editor, a generic drawing and animation program http://qi-hw.com/p/openwrt-packages/6829840 | 11:25 |
---|---|---|
qi-bot | [commit] Werner Almesberger: lib/cwtest.c (start_test_mode_231): don't insist on IRQ_PLL_LOCK http://qi-hw.com/p/ben-wpan/8c00833 | 15:39 |
qi-bot | [commit] Werner Almesberger: tools/: rearranged cwtest/atrf-path to be more clear about reset and do re-init http://qi-hw.com/p/ben-wpan/9ef4478 | 17:47 |
qi-bot | [commit] Werner Almesberger: tools/dirtpan/dirtpan.c: added missing #include "daemon.h", oops http://qi-hw.com/p/ben-wpan/a800eb8 | 23:02 |
qi-bot | [commit] Werner Almesberger: prod/atusb (TRX_OFF): C5 was "x" for no good reason - changed to "H" http://qi-hw.com/p/ben-wpan/fb80f51 | 02:05 |
---|---|---|
qi-bot | [commit] Werner Almesberger: prod/atusb (TRX_OFF): walk all GPIOs. Also, use that MISO is Z if nSS = H http://qi-hw.com/p/ben-wpan/5f3cc76 | 02:05 |
qi-bot | [commit] Werner Almesberger: prod/atusb: P_ON test turned out to be unreliable - skip it for now http://qi-hw.com/p/ben-wpan/13f4a35 | 02:05 |
qi-bot | [commit] Werner Almesberger: prod/atben (gpio_ben): in TRX_OFF, use that MISO is Z if nSS = H http://qi-hw.com/p/ben-wpan/d135eb2 | 02:05 |
qi-bot | [commit] Werner Almesberger: prod/doc/setup.hmac: changed boot.hex and atusb.bin to the ce16a16 versions http://qi-hw.com/p/ben-wpan/3e37af6 | 10:29 |
qi-bot | [commit] Werner Almesberger: prod/: P_ON test for atusb can't work as intended ... because we're not in P_ON http://qi-hw.com/p/ben-wpan/39c3725 | 10:49 |
qi-bot | [commit] David Kühling: plplot: make compile again with openwrt trunk; switch to using cmake.mk http://qi-hw.com/p/openwrt-packages/01b5b15 | 10:44 |
---|---|---|
qi-bot | [commit] Werner Almesberger: atusb/fw: revert most of the user_setups change and use simple callback instead http://qi-hw.com/p/ben-wpan/bbe27fc | 17:38 |
qi-bot | [commit] Werner Almesberger: atusb/fw/: moved common elements of DFU processing to dfu_common.c http://qi-hw.com/p/ben-wpan/2544004 | 17:38 |
qi-bot | [commit] Werner Almesberger: atusb/fw/usb/: DFU_ITF_DESCR also needs a protocol argument http://qi-hw.com/p/ben-wpan/5f50611 | 17:38 |
qi-bot | [commit] Werner Almesberger: atusb/fw/: added transition from runtime to DFU mode according to DFU spec http://qi-hw.com/p/ben-wpan/2d7ee91 | 17:38 |
qi-bot | [commit] Werner Almesberger: atusb/fw/: moved timer initialization to board_app.c as well http://qi-hw.com/p/ben-wpan/2acdaca | 17:38 |
qi-bot | [commit] Werner Almesberger: atusb/fw/: make timer code use interrupts instead of polling http://qi-hw.com/p/ben-wpan/a69916d | 17:38 |
qi-bot | [commit] Werner Almesberger: atusb/fw/usb/atu2.c: use implicit race-free "and" when writing to UDINT/UEINTX http://qi-hw.com/p/ben-wpan/f9681e5 | 17:38 |
qi-bot | [commit] Werner Almesberger: atusb/fw/: changed USB stack to use interrupts instead of polling http://qi-hw.com/p/ben-wpan/d03beb2 | 17:38 |
qi-bot | [commit] Werner Almesberger: atusb/fw/usb/: we were busy-looping on TXINI. Mask the interrupt when idle. http://qi-hw.com/p/ben-wpan/3762369 | 17:38 |
qi-bot | [commit] Werner Almesberger: atusb/fw/boot.c: adjusted the delay loop and don't race with dfu-util http://qi-hw.com/p/ben-wpan/b42577b | 17:38 |
qi-bot | [commit] Werner Almesberger: atusb/fw/atusb.c (main): sleep (idle mode) while waiting for interrupts http://qi-hw.com/p/ben-wpan/ce16a16 | 17:38 |
qi-bot | [commit] Werner Almesberger: atrf-xmit.c (xfer_one): pulse SLP_TR instead of sending TRX_CMD_TX_START http://qi-hw.com/p/ben-wpan/703ce81 | 00:11 |
---|---|---|
qi-bot | [commit] Werner Almesberger: atrf-xmit: use receive interrupt instead of polling http://qi-hw.com/p/ben-wpan/abe923d | 00:11 |
qi-bot | [commit] Werner Almesberger: tools/atrf-proxy/atrf-proxy.c (cmd_zero): reduce poll delay from 100 ms to 2 ms http://qi-hw.com/p/ben-wpan/78ab017 | 00:11 |
qi-bot | [commit] Werner Almesberger: atusb/fw/board.c (reset_rf): increased 1 us delays to nominally 2 us http://qi-hw.com/p/ben-wpan/256ac01 | 00:11 |
qi-bot | [commit] Werner Almesberger: atrf-xmit: tightened checking of interrupt behaviour http://qi-hw.com/p/ben-wpan/4d4e132 | 00:11 |
qi-bot | [commit] Werner Almesberger: fab/m1/: quick and dirty adaptation of prettygerbv and drl2gerber to M1 http://qi-hw.com/p/eda-tools/2a6496d | 13:31 |
qi-bot | [commit] Werner Almesberger: fab/m1/prettygerbv: feeble attempt at showing at least some layer connectivity http://qi-hw.com/p/eda-tools/4e48491 | 13:56 |
qi-bot | [commit] Werner Almesberger: eda-tools/fab/gerb2pbm: convert a Gerber file to a PBM image http://qi-hw.com/p/eda-tools/f6b4859 | 15:39 |
qi-bot | [commit] Werner Almesberger: atusb/fw/: SET_INTERFACE can now select among interfaces (changes user_setup) http://qi-hw.com/p/ben-wpan/89d13ce | 23:13 |
qi-bot | [commit] Werner Almesberger: atusb/fw/: define USB bus current (40 mA) in board.h based on measured value http://qi-hw.com/p/ben-wpan/3cc92cc | 23:13 |
qi-bot | [commit] Werner Almesberger: atusb/fw/usb/dfu.h: define DFU interface descriptor, for later sharing http://qi-hw.com/p/ben-wpan/7a2c785 | 23:13 |
qi-bot | [commit] Sergey Kukunin: Fix segmentation fault when try show Manual on Explorer or other service apps http://qi-hw.com/p/gmenu2x/28fe39c | 23:48 |
qi-bot | [commit] David Kühling: alex4: move save-files to ~/.alex4.* http://qi-hw.com/p/openwrt-packages/7d8785d | 14:17 |
---|---|---|
qi-bot | [commit] David Kühling: octave: fix fortran compile flags, enable parallel compilation http://qi-hw.com/p/openwrt-packages/c33acf0 | 14:17 |
qi-bot | [commit] Werner Almesberger: atusb/fw/: split board functions into app-only/shared part (boot overlflowed) http://qi-hw.com/p/ben-wpan/e678401 | 17:07 |
qi-bot | [commit] Werner Almesberger: atusb/fw/board_app.c: removed unnecessary includes http://qi-hw.com/p/ben-wpan/ed6d43b | 17:07 |
qi-bot | [commit] Werner Almesberger: atusb/fw/boot.c (main): reset_rf implies spi_init - no need to call it here http://qi-hw.com/p/ben-wpan/814cf6f | 17:07 |
qi-bot | [commit] Werner Almesberger: atusb/fw/: added "lazy enabling" of UART-SPI after ATUSB_GPIO http://qi-hw.com/p/ben-wpan/ec7c937 | 17:07 |
qi-bot | [commit] Xiangfu Liu: gtkguitune, swap left and right interface patch http://qi-hw.com/p/openwrt-packages/221303d | 00:08 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: nanonote-files: reflash_ben.sh using -O in wget http://qi-hw.com/p/openwrt-packages/3ecb2ca | 00:08 |
qi-bot | [commit] Werner Almesberger: tp/: map of test points on the Ben (battery area for now) http://qi-hw.com/p/wernermisc/8ccfd2b | 22:42 |
qi-bot | [commit] Werner Almesberger: prod/Common: try to obtain more consistent handling of \033 in echo http://qi-hw.com/p/ben-wpan/6e3edf3 | 00:57 |
---|---|---|
qi-bot | [commit] David Kühling: new package libdumb: mod/xm player (dumbplay) plus player library for games http://qi-hw.com/p/openwrt-packages/51707e8 | 09:38 |
qi-bot | [commit] Werner Almesberger: prod/: use positive and negative offset in spectrum test http://qi-hw.com/p/ben-wpan/66fb9d8 | 11:16 |
qi-bot | [commit] David Kühling: new package: alex4: Alex the Allegator v4: Game-Boy style jump&n&run game http://qi-hw.com/p/openwrt-packages/51cbdda | 11:32 |
qi-bot | [commit] David Kühling: alex4: use left shift as fire key (left control missing on Nanonote) http://qi-hw.com/p/openwrt-packages/af0b29d | 11:49 |
qi-bot | [commit] David Kühling: remove allegro-setup launcher: don't want people to accidentally break sound playback http://qi-hw.com/p/gmenu2x/c619514 | 11:50 |
qi-bot | [commit] David Kühling: add launcher for alex4 http://qi-hw.com/p/gmenu2x/97adb06 | 11:50 |
qi-bot | [commit] Werner Almesberger: fpd2pdf/fpdoc: ignore items in .pos not defined in the schematics http://qi-hw.com/p/eda-tools/0de3b96 | 19:45 |
qi-bot | [commit] Werner Almesberger: atben: include the position of fiducials in atben-pos.csv http://qi-hw.com/p/ben-wpan/9f9e77d | 19:46 |
qi-bot | [commit] Werner Almesberger: atusb: include the position of fiducials in atusb-pos.csv (for fab) http://qi-hw.com/p/ben-wpan/b410761 | 19:52 |
qi-bot | [commit] Werner Almesberger: atudb/fw: disable the UART in ATUSB_GPIO http://qi-hw.com/p/ben-wpan/e6f7d85 | 04:11 |
---|---|---|
qi-bot | [commit] Werner Almesberger: tools/atrf-gpio/atusb.c: various bug fixes and improvements http://qi-hw.com/p/ben-wpan/87e06b4 | 04:11 |
qi-bot | [commit] Werner Almesberger: libatrf: add option to send a pulse with atrf_slp_tr http://qi-hw.com/p/ben-wpan/1a3f169 | 04:11 |
qi-bot | [commit] Werner Almesberger: tools/atrf-gpio/atusb.c: if ATUSB_GPIO fails, show the attempted setting http://qi-hw.com/p/ben-wpan/a73a8a2 | 04:11 |
qi-bot | [commit] Werner Almesberger: tools/atrf-gpio/atusb.c (gpio): _exit after USB error, to avoid futile cleanup http://qi-hw.com/p/ben-wpan/e9debdd | 04:11 |
qi-bot | [commit] Werner Almesberger: atrf-gpio: accept 'o' as an alias for 'l' http://qi-hw.com/p/ben-wpan/33b0400 | 04:11 |
qi-bot | [commit] Werner Almesberger: prod/atben: changed 'l' to 'o' in all patterns http://qi-hw.com/p/ben-wpan/e7dfb38 | 04:11 |
qi-bot | [commit] Werner Almesberger: atusb/fw/: new request ATUSB_SLP_TR to pulse SLP_TR http://qi-hw.com/p/ben-wpan/e42203b | 04:11 |
qi-bot | [commit] Werner Almesberger: lib/atusb.c (atusb_slp_tr, atusb_driver): implemented SLP_TR pulse http://qi-hw.com/p/ben-wpan/52657ed | 04:11 |
qi-bot | [commit] Werner Almesberger: tools/lib/cwtest.c (cw_test_end): use reset also on USB devices http://qi-hw.com/p/ben-wpan/2a4f7a1 | 04:11 |
qi-bot | [commit] Werner Almesberger: prod/atben: quote command containing !, to make it easier to copy & paste http://qi-hw.com/p/ben-wpan/dea9730 | 04:11 |
qi-bot | [commit] Werner Almesberger: atrf-gpio: added control commands; register read can now be masked http://qi-hw.com/p/ben-wpan/14215f5 | 04:11 |
qi-bot | [commit] Werner Almesberger: prod/atusb: added GPIO test http://qi-hw.com/p/ben-wpan/38a08c0 | 04:11 |
qi-bot | [commit] Werner Almesberger: prod/doc/: updated for latest GPIO scan development http://qi-hw.com/p/ben-wpan/0eb5fb1 | 04:11 |
qi-bot | [commit] Lars-Peter Clausen: Fix MFD jz4740-ts entry http://qi-hw.com/p/qi-kernel/8d5052a | 04:52 |
qi-bot | [commit] Lars-Peter Clausen: jz4740: Fix compile error http://qi-hw.com/p/qi-kernel/7968eee | 05:08 |
qi-bot | [commit] Lars-Peter Clausen: jz4740: Fix compile error http://qi-hw.com/p/qi-kernel/a4f93b3 | 05:08 |
qi-bot | [commit] kyak: centerim5: no need for DownloadMethod/git trickery http://qi-hw.com/p/openwrt-packages/ab0e616 | 05:36 |
qi-bot | [commit] kyak: Update gmenu2x.sh for install_locations changes http://qi-hw.com/p/gmenu2x/4b22318 | 06:07 |
qi-bot | [commit] kyak: Zero-pad hex values when saving config http://qi-hw.com/p/gmenu2x/6646525 | 07:43 |
qi-bot | [commit] florian: [ep93xx] use IMG_PREFIX for image name http://qi-hw.com/p/openwrt-xburst/44bc580 | 19:13 |
qi-bot | [commit] florian: [ep93xx] define UIMAGE for various rootfs targets http://qi-hw.com/p/openwrt-xburst/29ba1ea | 19:13 |
qi-bot | [commit] florian: [ep93xx] update to 2.6.39.1 http://qi-hw.com/p/openwrt-xburst/b5a33bb | 19:13 |
qi-bot | [commit] Mirko Vogt: add <http://downloads.qi-hardware.com/software/mirror-openwrt-sources/> http://qi-hw.com/p/openwrt-xburst/a37eea9 | 19:13 |
qi-bot | [commit] Xiangfu Liu: optimize for ben nanonote http://qi-hw.com/p/openwrt-xburst/0f43545 | 19:13 |
qi-bot | [commit] Xiangfu Liu: [xburst] Improve mounttime http://qi-hw.com/p/openwrt-xburst/c868d46 | 19:13 |
qi-bot | [commit] Xiangfu Liu: nanonote optimize http://qi-hw.com/p/openwrt-xburst/c1dba4c | 19:13 |
qi-bot | [commit] Xiangfu Liu: Add-gfortran-compiler-support-to-the-toolchain http://qi-hw.com/p/openwrt-xburst/cf4b099 | 19:13 |
qi-bot | [commit] kyak: add kernel patch for setfont2 http://qi-hw.com/p/openwrt-xburst/dd385c4 | 19:13 |
qi-bot | [commit] Xiangfu Liu: optimize for ben nanonote http://qi-hw.com/p/openwrt-xburst/797be6b | 19:13 |
qi-bot | [commit] kyak: config-2.6.37: enable battery, disable RNDIS http://qi-hw.com/p/openwrt-xburst/a3d8a8b | 19:13 |
qi-bot | [commit] kyak: patches-2.6.37: support for Ben NAND partitioning http://qi-hw.com/p/openwrt-xburst/83f076a | 19:13 |
qi-bot | [commit] David Kühling: linux kernel: add CONFIG_PROC_PAGE_MONITOR=y to allow for clean user-space DMA http://qi-hw.com/p/openwrt-xburst/fbaf655 | 19:13 |
qi-bot | [commit] kyak: config-2.6.37: enable options needed for keymouse http://qi-hw.com/p/openwrt-xburst/e74aa2b | 19:13 |
qi-bot | [commit] kyak: trunk: fix kernel keymap for VolUp/Down and Del http://qi-hw.com/p/openwrt-xburst/b35d1cf | 19:13 |
qi-bot | [commit] kyak: trunk: build sound modules in kernel http://qi-hw.com/p/openwrt-xburst/0942c36 | 19:13 |
qi-bot | [commit] kyak: trunk: add ks7010 support patch http://qi-hw.com/p/openwrt-xburst/5e6fcae | 19:13 |
qi-bot | [commit] Xiangfu Liu: base-files, move it to openwrt-package/nanonote-files http://qi-hw.com/p/openwrt-xburst/cbc84e1 | 19:13 |
qi-bot | [commit] kyak: uboot-xburst: don't install empty dir http://qi-hw.com/p/openwrt-xburst/bce1b8d | 19:13 |
qi-bot | [commit] kyak: Disable syslogd and klogd http://qi-hw.com/p/openwrt-xburst/467647c | 19:13 |
qi-bot | [commit] David Kühling: add icons and shortcuts for allegro shooter demo and allegro setup program http://qi-hw.com/p/gmenu2x/e5452e5 | 19:22 |
qi-bot | [commit] Mirko Vogt: add <http://downloads.qi-hardware.com/software/mirror-openwrt-sources/> http://qi-hw.com/p/openwrt-xburst/b1a7200 | 19:26 |
qi-bot | [commit] Xiangfu Liu: optimize for ben nanonote http://qi-hw.com/p/openwrt-xburst/402a517 | 19:26 |
qi-bot | [commit] Xiangfu Liu: [xburst] Improve mounttime http://qi-hw.com/p/openwrt-xburst/807cc4b | 19:26 |
qi-bot | [commit] Xiangfu Liu: nanonote optimize http://qi-hw.com/p/openwrt-xburst/5f63507 | 19:26 |
qi-bot | [commit] Xiangfu Liu: Add-gfortran-compiler-support-to-the-toolchain http://qi-hw.com/p/openwrt-xburst/eaaf0bd | 19:26 |
qi-bot | [commit] kyak: add kernel patch for setfont2 http://qi-hw.com/p/openwrt-xburst/2703fe0 | 19:26 |
qi-bot | [commit] Xiangfu Liu: optimize for ben nanonote http://qi-hw.com/p/openwrt-xburst/ed08699 | 19:26 |
qi-bot | [commit] kyak: config-2.6.37: enable battery, disable RNDIS http://qi-hw.com/p/openwrt-xburst/8d85716 | 19:26 |
qi-bot | [commit] kyak: patches-2.6.37: support for Ben NAND partitioning http://qi-hw.com/p/openwrt-xburst/21c6371 | 19:26 |
qi-bot | [commit] David Kühling: linux kernel: add CONFIG_PROC_PAGE_MONITOR=y to allow for clean user-space DMA http://qi-hw.com/p/openwrt-xburst/1502cdd | 19:26 |
qi-bot | [commit] kyak: config-2.6.37: enable options needed for keymouse http://qi-hw.com/p/openwrt-xburst/89bf2df | 19:26 |
qi-bot | [commit] kyak: trunk: fix kernel keymap for VolUp/Down and Del http://qi-hw.com/p/openwrt-xburst/c27e043 | 19:26 |
qi-bot | [commit] kyak: trunk: build sound modules in kernel http://qi-hw.com/p/openwrt-xburst/c1d7c81 | 19:26 |
qi-bot | [commit] kyak: trunk: add ks7010 support patch http://qi-hw.com/p/openwrt-xburst/328d74a | 19:26 |
qi-bot | [commit] Xiangfu Liu: base-files, move it to openwrt-package/nanonote-files http://qi-hw.com/p/openwrt-xburst/0432ba5 | 19:26 |
qi-bot | [commit] David Kühling: Merge branch 'trunk' of projects.qi-hardware.com:openwrt-xburst into trunk http://qi-hw.com/p/openwrt-xburst/3ab1444 | 19:26 |
qi-bot | [commit] David Kühling: config.full_system: all allegro library, setup and demo program, add http://qi-hw.com/p/openwrt-packages/c295b45 | 19:28 |
qi-bot | [commit] David Kühling: config.full_system: add liballegro stuff into image (=y>, not as module (=m) http://qi-hw.com/p/openwrt-packages/ef9bfac | 19:30 |
qi-bot | [commit] Werner Almesberger: atrf-gpio: option -c to cycle through the pattern sequence with pass/fail input http://qi-hw.com/p/ben-wpan/7a2e091 | 23:28 |
qi-bot | [commit] Werner Almesberger: atrf-gpio.c: rename anything "reg_op" to "command" http://qi-hw.com/p/ben-wpan/533dc58 | 23:28 |
qi-bot | [commit] Werner Almesberger: atrf-gpio: cleaned up usage http://qi-hw.com/p/ben-wpan/8f20b1f | 23:28 |
qi-bot | [commit] Werner Almesberger: prod/atusb (led): added the LED test http://qi-hw.com/p/ben-wpan/ba6dd86 | 23:28 |
qi-bot | [commit] Werner Almesberger: prod/doc/test.hmac: we now also have the LED test http://qi-hw.com/p/ben-wpan/9a32c66 | 23:28 |
qi-bot | [commit] Werner Almesberger: atrf-path: accept keyboard input both from stdin and SDL http://qi-hw.com/p/ben-wpan/6ca63fc | 23:28 |
qi-bot | [commit] Werner Almesberger: prod/doc/: atrf-path now accepts keypresses from all the usual places http://qi-hw.com/p/ben-wpan/90ee726 | 23:28 |
qi-bot | [commit] Maarten ter Huurne: Surface: Work around bug in SDL that loses per-surface alpha. http://qi-hw.com/p/gmenu2x/2394a07 | 04:05 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: PNG: Use libpng directly instead of via SDL_image. http://qi-hw.com/p/gmenu2x/7aeb7a4 | 04:05 |
qi-bot | [commit] kyak: lingot: not only guitar tuner using GTK http://qi-hw.com/p/openwrt-packages/a1b9d11 | 13:49 |
qi-bot | [commit] Werner Almesberger: libatrf: added SRAM access functions http://qi-hw.com/p/ben-wpan/472e182 | 14:20 |
---|---|---|
qi-bot | [commit] Werner Almesberger: tools/lib/atben.c: added SRAM access to atben driver http://qi-hw.com/p/ben-wpan/6b447f8 | 14:20 |
qi-bot | [commit] Werner Almesberger: atusb/fw/ep0.c: fixed ATUSB_SRAM_READ http://qi-hw.com/p/ben-wpan/b733431 | 14:20 |
qi-bot | [commit] Werner Almesberger: tools/lib/atusb.c: added SRAM access to atusb driver http://qi-hw.com/p/ben-wpan/4aff7af | 14:20 |
qi-bot | [commit] Werner Almesberger: tools/lib/atusb.c: added SRAM access to atusb driver http://qi-hw.com/p/ben-wpan/565fadf | 14:20 |
qi-bot | [commit] Werner Almesberger: atrf-gpio: new utility to directly access GPIOs (for now atben-only) http://qi-hw.com/p/ben-wpan/4924755 | 14:20 |
qi-bot | [commit] Werner Almesberger: prod/atben: added GPIO test http://qi-hw.com/p/ben-wpan/59469a4 | 14:20 |
qi-bot | [commit] Werner Almesberger: atusb/fw: new request ATUSB_GPIO for direct GPIO access http://qi-hw.com/p/ben-wpan/370cd32 | 14:20 |
qi-bot | [commit] Werner Almesberger: tools/atrf-gpio/atusb.c: ATUSB driver (using ATUSB_GPIO) http://qi-hw.com/p/ben-wpan/b0f3cb0 | 14:20 |
qi-bot | [commit] Werner Almesberger: tools/atrf-gpio/atben.c: made error report easier to read http://qi-hw.com/p/ben-wpan/6bf03fe | 14:20 |
qi-bot | [commit] Werner Almesberger: prod/doc/test.hmac: expanded GPIO scan section (in progress) http://qi-hw.com/p/ben-wpan/d1dd611 | 14:20 |
qi-bot | [commit] Xiangfu Liu: new package: gtkguitune: for tuning guitars and other instruments by using the method of Schmitt-triggering http://qi-hw.com/p/openwrt-packages/6c1f174 | 02:54 |
---|---|---|
qi-bot | [commit] David Kühling: liballegro-digmid: make percussion instruments work. http://qi-hw.com/p/openwrt-packages/7ce9a12 | 10:10 |
qi-bot | [commit] David Kühling: Merge branch 'trunk' of projects.qi-hardware.com:openwrt-packages into trunk http://qi-hw.com/p/openwrt-packages/7dc3d44 | 10:10 |
qi-bot | [commit] David Kühling: liballegro: make allegro-setup operate on correct config file http://qi-hw.com/p/openwrt-packages/58cdfd4 | 10:16 |
qi-bot | [commit] Maarten ter Huurne: Surface: Use the destructor as intended. http://qi-hw.com/p/gmenu2x/0a9229f | 10:52 |
qi-bot | [commit] Maarten ter Huurne: Surface: Load image with factory method instead of constructor. http://qi-hw.com/p/gmenu2x/52f4686 | 10:52 |
qi-bot | [commit] Maarten ter Huurne: Surface: Minor cleanups. http://qi-hw.com/p/gmenu2x/25e8e62 | 10:52 |
qi-bot | [commit] Maarten ter Huurne: Surface: Made "raw" field private. http://qi-hw.com/p/gmenu2x/7861e07 | 10:52 |
qi-bot | [commit] Maarten ter Huurne: Surface: Make pixel format conversion explicit. http://qi-hw.com/p/gmenu2x/8a81837 | 10:52 |
qi-bot | [commit] Maarten ter Huurne: PNG: Only add alpha channel on surface if loaded image has an alpha channel. http://qi-hw.com/p/gmenu2x/36260e9 | 10:52 |
qi-bot | [commit] kyak: moc: pushed upstream http://qi-hw.com/p/openwrt-packages/2447082 | 13:18 |
qi-bot | [commit] Sergey Kukunin: Add powersaver class http://qi-hw.com/p/gmenu2x/240286d | 03:40 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: Surface: Removed unused code and restricted access. http://qi-hw.com/p/gmenu2x/b6a5d89 | 05:21 |
qi-bot | [commit] Maarten ter Huurne: ASFont: Refactored string drawing methods. http://qi-hw.com/p/gmenu2x/b2896d6 | 05:21 |
qi-bot | [commit] Maarten ter Huurne: Surface: Removed duplicate constructor. http://qi-hw.com/p/gmenu2x/52c89d6 | 05:21 |
qi-bot | [commit] Maarten ter Huurne: Merge branch 'master' of projects.qi-hardware.com:gmenu2x http://qi-hw.com/p/gmenu2x/af3ed78 | 05:21 |
qi-bot | [commit] Maarten ter Huurne: SurfaceCollection: Removed alpha flag. http://qi-hw.com/p/gmenu2x/44ca4e3 | 05:21 |
qi-bot | [commit] Maarten ter Huurne: Surface: Remove alpha flag. http://qi-hw.com/p/gmenu2x/7877fee | 05:21 |
qi-bot | [commit] Maarten ter Huurne: PNG: Make loadPNG() responsible for creating an RGBA surface. http://qi-hw.com/p/gmenu2x/8b17e2e | 05:21 |
qi-bot | [commit] Maarten ter Huurne: Fixed bug: wallpaper does not use alpha channel. http://qi-hw.com/p/gmenu2x/5b6d922 | 05:21 |
qi-bot | [commit] Xiangfu Liu: 4th: remove BROKEN http://qi-hw.com/p/openwrt-packages/56f94ee | 07:54 |
qi-bot | [commit] Xiangfu Liu: nanonote-files: reflash_ben.sh: add -b -k -r to help message http://qi-hw.com/p/openwrt-packages/35f5151 | 08:26 |
qi-bot | [commit] David Kühling: liballegro: fix demo and setup programs for 32bpp video mode; move data-files http://qi-hw.com/p/openwrt-packages/77f424b | 10:07 |
qi-bot | [commit] David Kühling: Merge branch 'trunk' of projects.qi-hardware.com:openwrt-packages into trunk http://qi-hw.com/p/openwrt-packages/3fe0b2e | 10:07 |
qi-bot | [commit] Maarten ter Huurne: ASFont: cleanups in text write methods. http://qi-hw.com/p/gmenu2x/1bc5539 | 10:17 |
qi-bot | [commit] Maarten ter Huurne: ASFont: merged SFontPlus class into ASFont class. http://qi-hw.com/p/gmenu2x/b4f3cde | 10:17 |
qi-bot | [commit] Maarten ter Huurne: ASFont: removed duplication of horizontal alignment code. http://qi-hw.com/p/gmenu2x/bff04d2 | 10:17 |
qi-bot | [commit] Maarten ter Huurne: Merge branch 'master' of projects.qi-hardware.com:gmenu2x http://qi-hw.com/p/gmenu2x/8592038 | 10:17 |
qi-bot | [commit] Maarten ter Huurne: Fixed debug print. http://qi-hw.com/p/gmenu2x/db5ebff | 10:17 |
qi-bot | [commit] Maarten ter Huurne: ASFont: only convert font surface if it is not already in a 32bpp format. http://qi-hw.com/p/gmenu2x/41e6e46 | 10:17 |
qi-bot | [commit] Maarten ter Huurne: ASFont: access font pixels efficiently. http://qi-hw.com/p/gmenu2x/a382a42 | 10:17 |
qi-bot | [commit] Xiangfu Liu: add color ash shell, add the method to gmenu2x.sh as comment http://qi-hw.com/p/gmenu2x/e0831be | 10:17 |
qi-bot | [commit] Xiangfu Liu: nanonote: fix setfont path http://qi-hw.com/p/gmenu2x/6087e23 | 10:17 |
qi-bot | [commit] Xiangfu Liu: nanonote: using color font http://qi-hw.com/p/gmenu2x/b068aa0 | 10:17 |
qi-bot | [commit] Maarten ter Huurne: Surface: Removed unused code and restricted access. http://qi-hw.com/p/gmenu2x/b6a5d89 | 10:17 |
qi-bot | [commit] Maarten ter Huurne: ASFont: Refactored string drawing methods. http://qi-hw.com/p/gmenu2x/b2896d6 | 10:17 |
qi-bot | [commit] Maarten ter Huurne: Surface: Removed duplicate constructor. http://qi-hw.com/p/gmenu2x/52c89d6 | 10:17 |
qi-bot | [commit] Sergey Kukunin: Add powersaver class http://qi-hw.com/p/gmenu2x/240286d | 10:17 |
qi-bot | [commit] Maarten ter Huurne: Merge branch 'master' of projects.qi-hardware.com:gmenu2x http://qi-hw.com/p/gmenu2x/af3ed78 | 10:17 |
qi-bot | [commit] Maarten ter Huurne: SurfaceCollection: Removed alpha flag. http://qi-hw.com/p/gmenu2x/44ca4e3 | 10:17 |
qi-bot | [commit] Maarten ter Huurne: Surface: Remove alpha flag. http://qi-hw.com/p/gmenu2x/7877fee | 10:17 |
qi-bot | [commit] Maarten ter Huurne: PNG: Make loadPNG() responsible for creating an RGBA surface. http://qi-hw.com/p/gmenu2x/8b17e2e | 10:17 |
qi-bot | [commit] Maarten ter Huurne: Fixed bug: wallpaper does not use alpha channel. http://qi-hw.com/p/gmenu2x/5b6d922 | 10:17 |
qi-bot | [commit] Ayla: Merge branch 'master' of projects.qi-hardware.com:gmenu2x into install_locations http://qi-hw.com/p/gmenu2x/ef4b012 | 10:17 |
qi-bot | [commit] David Kühling: liballegro: minor cleanup, fixes, tuning http://qi-hw.com/p/openwrt-packages/6175583 | 11:06 |
qi-bot | [commit] David Kühling: new package: liballegro-digmid: package 'freepats' samples for midi synthesizer http://qi-hw.com/p/openwrt-packages/eb32f8d | 13:03 |
qi-bot | [commit] David Kühling: liballegro: add config file to configure audio out & midi synthesizer http://qi-hw.com/p/openwrt-packages/b17ce18 | 13:04 |
qi-bot | [commit] Maarten ter Huurne: Surface: Removed fake double buffering. http://qi-hw.com/p/gmenu2x/7dac306 | 16:03 |
qi-bot | [commit] Maarten ter Huurne: Surface: Fixed memory leak in previous commit. http://qi-hw.com/p/gmenu2x/0c867aa | 16:08 |
qi-bot | [commit] Xiangfu Liu: new package: crashmail: CrashMail II is basically http://qi-hw.com/p/openwrt-packages/db4f174 | 08:54 |
---|
qi-bot | [commit] Xiangfu Liu: nanonote: using color font http://qi-hw.com/p/gmenu2x/b068aa0 | 01:05 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: gmenu2x update http://qi-hw.com/p/openwrt-packages/42902ec | 01:12 |
qi-bot | [commit] Xiangfu Liu: gmenu2x update http://qi-hw.com/p/openwrt-packages/6f6b4da | 01:21 |
qi-bot | [commit] Xiangfu Liu: nanonote-files: feeds.conf update to release_2011-05-28 http://qi-hw.com/p/openwrt-packages/de3017a | 01:34 |
qi-bot | [commit] Xiangfu Liu: nanonote-files: feeds.conf update to release_2011-05-28 http://qi-hw.com/p/openwrt-packages/a64e41e | 01:34 |
qi-bot | [commit] Werner Almesberger: atusb-flash: show avrdude progress output http://qi-hw.com/p/ben-wpan/cbd0fe5 | 06:33 |
qi-bot | [commit] kyak: husky: a bunch of tools for Fidonet http://qi-hw.com/p/openwrt-packages/f3798ea | 07:59 |
qi-bot | [commit] kyak: binkd: Fidonet mailer http://qi-hw.com/p/openwrt-packages/e7f7d81 | 09:17 |
qi-bot | [commit] David Kühling: liballegro: fix fbdev driver, also package examples http://qi-hw.com/p/openwrt-packages/2e457ea | 15:14 |
qi-bot | [commit] David Kühling: liballegro: enable alsa audio driver http://qi-hw.com/p/openwrt-packages/5845357 | 19:08 |
qi-bot | [commit] David Kühling: liballegro: enable alsa sound driver http://qi-hw.com/p/openwrt-packages/c4a2c82 | 19:16 |
qi-bot | [commit] David Kühling: Merge branch 'trunk' of projects.qi-hardware.com:openwrt-packages into trunk http://qi-hw.com/p/openwrt-packages/c3be89f | 19:16 |
qi-bot | [commit] Ayla: Moved all the data files (translations, skins...) to the "data" folder. http://qi-hw.com/p/gmenu2x/47a4e5c | 23:12 |
qi-bot | [commit] Ayla: Moved the pandora's "input.conf" file lying in the top directory to the pandora/data directory, replacing the previous (obsolete) one. http://qi-hw.com/p/gmenu2x/34af938 | 23:12 |
qi-bot | [commit] Ayla: The ./configure will now accept the --enable-platform switch. http://qi-hw.com/p/gmenu2x/b646c33 | 23:12 |
qi-bot | [commit] Xiangfu Liu: nanonote: fix setfont path http://qi-hw.com/p/gmenu2x/6087e23 | 01:54 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: debian: update changelog http://qi-hw.com/p/xburst-tools/b318731 | 03:48 |
qi-bot | [commit] Xiangfu Liu: update ChangeLog http://qi-hw.com/p/xburst-tools/13eba91 | 03:59 |
qi-bot | [commit] Xiangfu Liu: ChangeLog, fix typo http://qi-hw.com/p/xburst-tools/6d1f265 | 06:17 |
qi-bot | [commit] Xiangfu Liu: 4th: remove BROKEN http://qi-hw.com/p/openwrt-packages/0122bb0 | 07:38 |
qi-bot | [commit] David Kühling: new package: liballegro: a lightweight game and multimedia library http://qi-hw.com/p/openwrt-packages/3b7bed6 | 07:42 |
qi-bot | [commit] kyak: golded: Fidonet Mail Reader/Editor. http://qi-hw.com/p/openwrt-packages/b710d6b | 15:13 |
qi-bot | [commit] Werner Almesberger: atusb/fw/: added free-running 48 bit 8 MHz counter for clock measurements http://qi-hw.com/p/ben-wpan/8c57277 | 23:23 |
qi-bot | [commit] Werner Almesberger: atrf-xtal.c (do_atben, main): moved board-specific code to separate function http://qi-hw.com/p/ben-wpan/5a6aae5 | 23:23 |
qi-bot | [commit] Werner Almesberger: atrf-xtal: moved atben-specific code to atben.c http://qi-hw.com/p/ben-wpan/bdca204 | 23:23 |
qi-bot | [commit] Werner Almesberger: atrf-xtal: added atusb support (via ATUSB_TIMER) http://qi-hw.com/p/ben-wpan/61e656e | 23:23 |
qi-bot | [commit] Werner Almesberger: prod/doc/setup.hmac: updated ATUSB application firmware URL for new version http://qi-hw.com/p/ben-wpan/9515d96 | 23:23 |
qi-bot | [commit] Werner Almesberger: added clock frequency test for atusb and updated documentation http://qi-hw.com/p/ben-wpan/c8e942f | 23:23 |
qi-bot | [commit] Werner Almesberger: prod/doc/analysis.hmac: added atrf-xtal measurement on atusb; clarifictions http://qi-hw.com/p/ben-wpan/8c25bc2 | 23:23 |
qi-bot | [commit] kyak: ben-cyrillic: modified keymap http://qi-hw.com/p/openwrt-packages/3065078 | 09:35 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: offrss: update to 1.0 http://qi-hw.com/p/openwrt-packages/d0b6d45 | 10:14 |
qi-bot | [commit] David Kühling: new package: liballegro: a lightweight game and multimedia library http://qi-hw.com/p/openwrt-packages/4707057 | 11:56 |
qi-bot | [commit] kyak: ascii-paint: fix build in trunk http://qi-hw.com/p/openwrt-packages/4771df5 | 15:00 |
qi-bot | [commit] kyak: wordgrinder: fix build http://qi-hw.com/p/openwrt-packages/c0acd5c | 15:00 |
qi-bot | [commit] kyak: libncurses-dev: fix build http://qi-hw.com/p/openwrt-packages/6ba1616 | 15:00 |
qi-bot | [commit] kyak: dega: fix build http://qi-hw.com/p/openwrt-packages/8fdcc46 | 15:00 |
qi-bot | [commit] Werner Almesberger: prod/doc/index.hmac: make items in definition list stick out more http://qi-hw.com/p/ben-wpan/208663c | 17:47 |
qi-bot | [commit] Werner Almesberger: dropped f32xbase dependency on Makefile.common http://qi-hw.com/p/ben-wpan/45746fd | 17:47 |
qi-bot | [commit] Werner Almesberger: prod/doc/: reduced excessive use of <B> ... </B> http://qi-hw.com/p/ben-wpan/8b26bb7 | 17:47 |
qi-bot | [commit] Werner Almesberger: prod/doc/: cleanup and clarifications after proofreading http://qi-hw.com/p/ben-wpan/46b15ef | 17:47 |
qi-bot | [commit] Werner Almesberger: prod/doc/: completed section on component orientation (with pictures) http://qi-hw.com/p/ben-wpan/a662410 | 17:47 |
qi-bot | [commit] Werner Almesberger: prod/doc/analysis.html: typo and small language fix http://qi-hw.com/p/ben-wpan/40d78b2 | 22:38 |
qi-bot | [commit] Werner Almesberger: prod/doc/atben.fig: cover unused PCB space with a white rectangle http://qi-hw.com/p/ben-wpan/caa8c14 | 01:31 |
---|---|---|
qi-bot | [commit] Werner Almesberger: prod/doc/setup.hmac: described PC and Ben software and test script installation http://qi-hw.com/p/ben-wpan/6ac10dd | 01:31 |
qi-bot | [commit] Werner Almesberger: prod/doc/setup.hmac: filled the intro sections; added dfu-util installation http://qi-hw.com/p/ben-wpan/717f7e7 | 01:31 |
qi-bot | [commit] Werner Almesberger: prod/doc/: added scope screen shots to analysis; show crystal as alt GND for clk http://qi-hw.com/p/ben-wpan/c93f6d9 | 01:31 |
qi-bot | [commit] Werner Almesberger: prod/doc/: renamed at???-clk*.png to scope-*, to prevent wildcard clash http://qi-hw.com/p/ben-wpan/d884ab5 | 01:31 |
qi-bot | [commit] Werner Almesberger: prod/doc/test.hmac: added introductory text for test setups http://qi-hw.com/p/ben-wpan/b583142 | 01:31 |
qi-bot | [commit] kyak: luit: Locale and ISO 2022 support for Unicode terminals http://qi-hw.com/p/openwrt-packages/7f2174a | 10:38 |
qi-bot | [commit] kyak: luit: Locale and ISO 2022 support for Unicode terminals http://qi-hw.com/p/openwrt-packages/f370d5c | 10:43 |
qi-bot | [commit] Werner Almesberger: prod/doc/setup.hmac: explicitly mention SDL_gfx as a prerequisite http://qi-hw.com/p/ben-wpan/2bb2e7b | 16:23 |
qi-bot | [commit] Werner Almesberger: prod/: moved more configurable items to variables http://qi-hw.com/p/ben-wpan/0372d7d | 16:23 |
qi-bot | [commit] Werner Almesberger: prod/doc/setup.hmac: completed test script customization section http://qi-hw.com/p/ben-wpan/c78423b | 16:23 |
qi-bot | [commit] Werner Almesberger: tools/atrf-path: added interactive dumping with D http://qi-hw.com/p/ben-wpan/b82472b | 16:23 |
qi-bot | [commit] Werner Almesberger: atrf-path: added visual history of dumps http://qi-hw.com/p/ben-wpan/0eec747 | 16:23 |
qi-bot | [commit] Werner Almesberger: prod/Makefile: target "spectrum" to generate reference spectrum; target spotless http://qi-hw.com/p/ben-wpan/680086b | 16:23 |
qi-bot | [commit] Werner Almesberger: prod/doc/: completed description of signal strength measurement http://qi-hw.com/p/ben-wpan/33f84b4 | 16:23 |
qi-bot | [commit] Werner Almesberger: prod/doc/flash.html: use local copy of atusb-programming.jpg; language cleanup http://qi-hw.com/p/ben-wpan/889757e | 00:58 |
---|---|---|
qi-bot | [commit] Werner Almesberger: prod/doc/Makefile: added upload to downloads.qi-hardware.com http://qi-hw.com/p/ben-wpan/b9343a9 | 00:58 |
qi-bot | [commit] Werner Almesberger: prod/doc/analysis.html: clarified enabling of 1.8 V rails; language cleanup http://qi-hw.com/p/ben-wpan/1410027 | 00:58 |
qi-bot | [commit] Werner Almesberger: prod/doc/test.html: added a decription of the tests http://qi-hw.com/p/ben-wpan/f5c46de | 00:58 |
qi-bot | [commit] Werner Almesberger: prod/doc/Makefile (DL, atusb-programming.jpg, atrf-path.png): shorten URLs http://qi-hw.com/p/ben-wpan/4aa05f2 | 00:58 |
qi-bot | [commit] Werner Almesberger: prod/doc/: added marked-up layout to indicate CLKM/CLK test points http://qi-hw.com/p/ben-wpan/b830302 | 00:58 |
qi-bot | [commit] Werner Almesberger: prod/doc/: added voltage measurement points on layout http://qi-hw.com/p/ben-wpan/cb855b2 | 00:58 |
qi-bot | [commit] kyak: uboot-xburst: don't install empty dir http://qi-hw.com/p/openwrt-xburst/064f285 | 06:26 |
qi-bot | [commit] kyak: qstardict: flite as default text-to-speech engine http://qi-hw.com/p/openwrt-packages/3051126 | 06:40 |
qi-bot | [commit] Werner Almesberger: prod/doc/: completed voltage measurement sections http://qi-hw.com/p/ben-wpan/f01c319 | 07:35 |
qi-bot | [commit] Werner Almesberger: atusb/: swapped C10 and C13 in schematics, to match layout http://qi-hw.com/p/ben-wpan/8a436b8 | 07:35 |
qi-bot | [commit] Werner Almesberger: prod/doc/Makefile: moved %-front.png up to give priority over atben-%.png http://qi-hw.com/p/ben-wpan/e88d66e | 07:35 |
qi-bot | [commit] Sergey Gridassov: Added Linux loader. http://qi-hw.com/p/jzboot/c739570 | 08:07 |
qi-bot | [commit] Ignacio Garcia Perez: FIXED: values of CPUSPEED greater than 255 were misread because the value was directly read into handle->cfg.cpu_speed (uint8_t) before dividing it by the external crystal frequency, and overflow resulted. Now intermediate variable is used and only the final result of the division is placed in handle->cfg.cpu_speed. http://qi-hw.com/p/jzboot/1cfb149 | 08:07 |
qi-bot | [commit] Peter Zotov: Fix -v to be less ugly. http://qi-hw.com/p/jzboot/792376f | 08:07 |
qi-bot | [commit] Peter Zotov: Update README to include jzboot building instructions. http://qi-hw.com/p/xburst-tools/a1652cf | 08:07 |
qi-bot | [commit] Peter Zotov: Fix Debian package name in configure helper. http://qi-hw.com/p/xburst-tools/0b86056 | 08:07 |
qi-bot | [commit] Peter Zotov: Updated bundled jzboot. http://qi-hw.com/p/xburst-tools/89f8d68 | 08:07 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst: nanonote: using 0xFF fill the bin file http://qi-hw.com/p/openwrt-xburst/43a8661 | 08:50 |
qi-bot | [commit] Xiangfu Liu: [debian] update the URL, add new depends for jzboot http://qi-hw.com/p/xburst-tools/d15b0fb | 08:54 |
qi-bot | [commit] Xiangfu Liu: usbboot: remove useless code http://qi-hw.com/p/xburst-tools/b8420d2 | 09:06 |
qi-bot | [commit] Werner Almesberger: prod/doc/: added HTML macro processor (hmac) and page-specific style http://qi-hw.com/p/ben-wpan/a99fbbf | 10:12 |
qi-bot | [commit] Werner Almesberger: prod/doc/: converted index.html to index.hmac http://qi-hw.com/p/ben-wpan/2f6c22d | 10:12 |
qi-bot | [commit] Werner Almesberger: prod/doc/: converted analysis.html to analysis.hmac; language cleanup http://qi-hw.com/p/ben-wpan/9ab0824 | 10:12 |
qi-bot | [commit] Werner Almesberger: prod/doc/: converted setup.html, flash.html, and test.html to hmac http://qi-hw.com/p/ben-wpan/8a70d4b | 10:12 |
qi-bot | [commit] Werner Almesberger: prod/doc/style.inc: fixed header formatting in Firefox http://qi-hw.com/p/ben-wpan/213e703 | 10:12 |
qi-bot | [commit] Xiangfu Liu: usbboot: fix hand.fw_args.cpu_id have wrong value when there is no 'boot' in commands http://qi-hw.com/p/xburst-tools/1d7a2f3 | 13:13 |
qi-bot | [commit] Xiangfu Liu: add color ash shell, add the method to gmenu2x.sh as comment http://qi-hw.com/p/gmenu2x/e0831be | 13:41 |
qi-bot | [commit] Xiangfu Liu: gmenu2x: update to 20110527 commit http://qi-hw.com/p/openwrt-packages/6a6b763 | 13:44 |
qi-bot | [commit] Xiangfu Liu: gmenu2x: update to 20110527 commit http://qi-hw.com/p/openwrt-packages/dca49da | 13:46 |
qi-bot | [commit] kyak: ben-cyrillic: add display for letter "io" http://qi-hw.com/p/openwrt-packages/53192fc | 15:57 |
qi-bot | [commit] Werner Almesberger: prod/doc/style.inc: interleave the navigation bar and shrink font http://qi-hw.com/p/ben-wpan/49177eb | 16:24 |
qi-bot | [commit] Werner Almesberger: prod/doc/style.inc: use sans serif font in the navigation bar http://qi-hw.com/p/ben-wpan/c0ec3f7 | 16:24 |
qi-bot | [commit] Werner Almesberger: prod/doc/setup.hmac, prod/doc/analysis.hmac: improved section titles http://qi-hw.com/p/ben-wpan/21cc289 | 16:24 |
qi-bot | [commit] Werner Almesberger: prod/doc/: give introductory text a separate intro section http://qi-hw.com/p/ben-wpan/be2e8b1 | 16:24 |
qi-bot | [commit] Werner Almesberger: prod/doc/hmac.pl: updated copyright; cleaned up declaration of local variables http://qi-hw.com/p/ben-wpan/838b8e1 | 16:24 |
qi-bot | [commit] Werner Almesberger: prod/doc/hmac.pl: allow self-referential macros (not general recursion) http://qi-hw.com/p/ben-wpan/2386f1f | 16:24 |
qi-bot | [commit] Werner Almesberger: prod/doc/Makefile: added "spotless"; cleaned up generated/downloaded/orig logic http://qi-hw.com/p/ben-wpan/77a60a9 | 16:24 |
qi-bot | [commit] Werner Almesberger: prod/doc/: added bottom navigation bar http://qi-hw.com/p/ben-wpan/e4fc649 | 16:24 |
qi-bot | [commit] Werner Almesberger: prod/doc/: make END macro generate the date and autor line; use current date http://qi-hw.com/p/ben-wpan/29ff186 | 16:24 |
qi-bot | [commit] kyak: Disable syslogd and klogd http://qi-hw.com/p/openwrt-xburst/7e22859 | 16:47 |
qi-bot | [commit] kyak: plplot: mark as BROKEN for it doesn't build in trunk http://qi-hw.com/p/openwrt-packages/5fdb51a | 06:52 |
---|---|---|
qi-bot | [commit] kyak: gcc-mips: restore cache-amnesia patch to fix build on x64 http://qi-hw.com/p/openwrt-packages/681b260 | 12:41 |
qi-bot | [commit] kyak: centerim5: fix git url; checkout mob branch http://qi-hw.com/p/openwrt-packages/f741694 | 12:41 |
qi-bot | [commit] kyak: ghostscript: update to 9.02, fix build http://qi-hw.com/p/openwrt-packages/601c607 | 13:23 |
qi-bot | [commit] Xiangfu Liu: dega: using nanonote version source code http://qi-hw.com/p/openwrt-packages/6f32e10 | 13:27 |
qi-bot | [commit] kyak: ghostscript: really update to 9.02 http://qi-hw.com/p/openwrt-packages/11ff553 | 13:31 |
qi-bot | [commit] David Kühling: plplot: fix compile problem on ubuntu 10.10 hosts (host's libm not found) http://qi-hw.com/p/openwrt-packages/54cdac8 | 21:43 |
qi-bot | [commit] Benson Leung: gpio-charger: Add gpio_charger_resume http://qi-hw.com/p/qi-kernel/8e7191d | 04:17 |
---|---|---|
qi-bot | [commit] Lars-Peter Clausen: udc http://qi-hw.com/p/qi-kernel/6960c45 | 04:17 |
qi-bot | [commit] Peter Zotov: Add IRQ workaround for JZ4750 errata. http://qi-hw.com/p/qi-kernel/6edec95 | 04:17 |
qi-bot | [commit] Peter Zotov: Add RTC platform device support for JZ4750. http://qi-hw.com/p/qi-kernel/df1752a | 04:17 |
qi-bot | [commit] Peter Zotov: MIPS: JZ47xx: Set up jz_gpio_chips in jz47xx_gpio_init. http://qi-hw.com/p/qi-kernel/277c69c | 04:17 |
qi-bot | [commit] Lars-Peter Clausen: Use UART1 as the low level debug port on the JZ4760 http://qi-hw.com/p/qi-kernel/23b2211 | 04:17 |
qi-bot | [commit] Peter Zotov: MIPS: JZ47xx: Generalize clock framework. http://qi-hw.com/p/qi-kernel/fc705e7 | 04:17 |
qi-bot | [commit] Peter Zotov: Update JZ4740 UDC driver to use new JZ47xx clock system. http://qi-hw.com/p/qi-kernel/d8c91da | 04:17 |
qi-bot | [commit] Peter Zotov: MIPS: JZ4750: Add support for UDC controller. http://qi-hw.com/p/qi-kernel/23d0949 | 04:17 |
qi-bot | [commit] Peter Zotov: Add JZ4750 NAND driver. http://qi-hw.com/p/qi-kernel/8786de5 | 04:17 |
qi-bot | [commit] Peter Zotov: Added MTD configuration for XZ0032 board. http://qi-hw.com/p/qi-kernel/0c2fd9f | 04:17 |
qi-bot | [commit] Peter Zotov: Update JZ4740 framebuffer driver to support new header layout. http://qi-hw.com/p/qi-kernel/982290d | 04:17 |
qi-bot | [commit] Peter Zotov: Add LCD support to JZ4750. http://qi-hw.com/p/qi-kernel/8e02a11 | 04:17 |
qi-bot | [commit] Lars-Peter Clausen: Merge remote branch 'remotes/whitequark/xz0032-wip' into jz47xx http://qi-hw.com/p/qi-kernel/4127a60 | 04:17 |
qi-bot | [commit] Lars-Peter Clausen: stash http://qi-hw.com/p/qi-kernel/9a83f48 | 04:17 |
qi-bot | [commit] Ignacio Garcia Perez: FIXED hideous bug in the special function pin configuration that pretty much broke it completely. http://qi-hw.com/p/qi-kernel/57230db | 04:17 |
qi-bot | [commit] Xiangfu Liu: nanonote-files: config.full_system: include new packages http://qi-hw.com/p/openwrt-packages/05d74e1 | 05:52 |
qi-bot | [commit] Xiangfu Liu: [new package] dega: a emulator for sega master system and game gear which uses SDL http://qi-hw.com/p/openwrt-packages/938af2c | 10:27 |
qi-bot | [commit] Xiangfu Liu: nanonote-files: config.full_system: include new packages http://qi-hw.com/p/openwrt-packages/3f8b21c | 10:28 |
qi-bot | [commit] Xiangfu Liu: climm: disable xmpp, make it compile http://qi-hw.com/p/openwrt-packages/c0d17b1 | 12:00 |
qi-bot | [commit] Xiangfu Liu: climm: disable xmpp, make it compile http://qi-hw.com/p/openwrt-packages/4379b2c | 12:00 |
qi-bot | [commit] Xiangfu Liu: [nanonote-files] reflash_ben.sh: fix -d using correct path http://qi-hw.com/p/openwrt-packages/cb0fb36 | 03:21 |
---|---|---|
qi-bot | [commit] kyak: gcc-mips: prepare for trunk http://qi-hw.com/p/openwrt-packages/e12038a | 03:40 |
qi-bot | [commit] kyak: alsa-lib: no need for this patch in trunk http://qi-hw.com/p/openwrt-packages/5d9fb4f | 03:40 |
qi-bot | [commit] kyak: ncursesw is perfectly fine in openwrt trunk, no need to override http://qi-hw.com/p/openwrt-packages/2a9d88c | 03:40 |
qi-bot | [commit] kyak: triggersad is now happy again! http://qi-hw.com/p/openwrt-packages/a587847 | 03:40 |
qi-bot | [commit] kyak: guile: fix compilation in trunk http://qi-hw.com/p/openwrt-packages/bd0dd2e | 03:40 |
qi-bot | [commit] kyak: gnuplot-gfx: fix compilation issue in trunk http://qi-hw.com/p/openwrt-packages/db5ca76 | 03:40 |
qi-bot | [commit] kyak: ben-cyrillic: fix keymap for VolUp/VolDown http://qi-hw.com/p/openwrt-packages/94156cd | 03:40 |
qi-bot | [commit] kyak: keymouse: fix keymap for VolUp/VolDown http://qi-hw.com/p/openwrt-packages/6c1f1bd | 03:40 |
qi-bot | [commit] kyak: ks7010: support kernel > 2.6.35 http://qi-hw.com/p/openwrt-packages/da6e346 | 03:40 |
qi-bot | [commit] kyak: busybox in trunk has changed some unicode options http://qi-hw.com/p/openwrt-packages/11d4435 | 03:40 |
qi-bot | [commit] kyak: libpurple: initial port http://qi-hw.com/p/openwrt-packages/57d4eb8 | 03:40 |
qi-bot | [commit] kyak: centerim5: initial port http://qi-hw.com/p/openwrt-packages/e4daa38 | 03:40 |
qi-bot | [commit] Xiangfu Liu: [nanonote-files] reflash_ben.sh: update version to 2011-05-22 http://qi-hw.com/p/openwrt-packages/cdd70d2 | 03:47 |
qi-bot | [commit] kyak: alsa-lib: no need for this patch in trunk http://qi-hw.com/p/openwrt-packages/09d5d02 | 06:08 |
qi-bot | [commit] kyak: ncursesw is perfectly fine in openwrt trunk, no need to override http://qi-hw.com/p/openwrt-packages/1d17965 | 06:08 |
qi-bot | [commit] kyak: triggersad is now happy again! http://qi-hw.com/p/openwrt-packages/ed48679 | 06:08 |
qi-bot | [commit] kyak: guile: fix compilation in trunk http://qi-hw.com/p/openwrt-packages/ec6b1e7 | 06:08 |
qi-bot | [commit] kyak: gnuplot-gfx: fix compilation issue in trunk http://qi-hw.com/p/openwrt-packages/17d05bb | 06:08 |
qi-bot | [commit] David Kühling: mplayer_jz47xx: upgrade to 0.1.5 version that supports /proc/<pid>/pagemap http://qi-hw.com/p/openwrt-packages/36bcb9e | 06:08 |
qi-bot | [commit] David Kühling: mplayer_jz47xx: fix md5-sum for updated version http://qi-hw.com/p/openwrt-packages/f342c3b | 06:08 |
qi-bot | [commit] kyak: update ffmpeg to a working git revision http://qi-hw.com/p/openwrt-packages/71d83e9 | 06:08 |
qi-bot | [commit] kyak: ben-cyrillic: fix keymap for VolUp/VolDown http://qi-hw.com/p/openwrt-packages/38ada8f | 06:08 |
qi-bot | [commit] kyak: keymouse: fix keymap for VolUp/VolDown http://qi-hw.com/p/openwrt-packages/3c53b09 | 06:08 |
qi-bot | [commit] kyak: ks7010: support kernel > 2.6.35 http://qi-hw.com/p/openwrt-packages/822e1e0 | 06:08 |
qi-bot | [commit] David Kühling: emacs: make programming language comments colored by default http://qi-hw.com/p/openwrt-packages/32e4ab8 | 06:08 |
qi-bot | [commit] kyak: config.full_system: disable busybox's strings, enable binutils and http://qi-hw.com/p/openwrt-packages/05e9503 | 06:08 |
qi-bot | [commit] Xiangfu Liu: nanonote-files: config.full_system: disable libxfce4util http://qi-hw.com/p/openwrt-packages/cd2b5dc | 06:08 |
qi-bot | [commit] Xiangfu Liu: nanonote-files: feeds.conf: disable useless feeds http://qi-hw.com/p/openwrt-packages/2a5cc31 | 06:08 |
qi-bot | [commit] kyak: busybox in trunk has changed some unicode options http://qi-hw.com/p/openwrt-packages/ef1173e | 06:08 |
qi-bot | [commit] kyak: libpurple: initial port http://qi-hw.com/p/openwrt-packages/0cde876 | 06:08 |
qi-bot | [commit] kyak: centerim5: initial port http://qi-hw.com/p/openwrt-packages/d04c529 | 06:08 |
qi-bot | [commit] kyak: Merge branch 'master' into trunk http://qi-hw.com/p/openwrt-packages/ad8ac99 | 06:08 |
qi-bot | [commit] kyak: Merge branch 'trunk' of projects.qi-hardware.com:openwrt-packages into trunk http://qi-hw.com/p/openwrt-packages/1e52ad6 | 06:08 |
qi-bot | [commit] Xiangfu Liu: [nanonote-files] reflash_ben.sh: update version to 2011-05-22 http://qi-hw.com/p/openwrt-packages/cdd70d2 | 06:25 |
qi-bot | [commit] kyak: gcc-mips: prepare for trunk http://qi-hw.com/p/openwrt-packages/83e109c | 06:25 |
qi-bot | [commit] kyak: alsa-lib: no need for this patch in trunk http://qi-hw.com/p/openwrt-packages/d9c3322 | 06:25 |
qi-bot | [commit] kyak: ncursesw is perfectly fine in openwrt trunk, no need to override http://qi-hw.com/p/openwrt-packages/60ae3de | 06:25 |
qi-bot | [commit] kyak: triggersad is now happy again! http://qi-hw.com/p/openwrt-packages/0f74ee4 | 06:25 |
qi-bot | [commit] kyak: guile: fix compilation in trunk http://qi-hw.com/p/openwrt-packages/e0bb18d | 06:25 |
qi-bot | [commit] kyak: gnuplot-gfx: fix compilation issue in trunk http://qi-hw.com/p/openwrt-packages/a8ac0c6 | 06:25 |
qi-bot | [commit] kyak: ben-cyrillic: fix keymap for VolUp/VolDown http://qi-hw.com/p/openwrt-packages/f54d4ad | 06:25 |
qi-bot | [commit] kyak: keymouse: fix keymap for VolUp/VolDown http://qi-hw.com/p/openwrt-packages/5395297 | 06:25 |
qi-bot | [commit] kyak: ks7010: support kernel > 2.6.35 http://qi-hw.com/p/openwrt-packages/82df0af | 06:25 |
qi-bot | [commit] kyak: busybox in trunk has changed some unicode options http://qi-hw.com/p/openwrt-packages/839aab9 | 06:25 |
qi-bot | [commit] kyak: libpurple: initial port http://qi-hw.com/p/openwrt-packages/4fd96bb | 06:25 |
qi-bot | [commit] kyak: centerim5: initial port http://qi-hw.com/p/openwrt-packages/00d5146 | 06:25 |
qi-bot | [commit] jow: [package] iw: fix calculation of fractional multicast rates like 5.5Mbps due to wrong operator precedence http://qi-hw.com/p/openwrt-xburst/030f9c1 | 08:57 |
qi-bot | [commit] jow: [package] ncurses: enable C++ bindings (#9442) http://qi-hw.com/p/openwrt-xburst/bfa121a | 08:57 |
qi-bot | [commit] jow: [netfilter] package u32 match and TEE target, patches by Maxim Uvarov http://qi-hw.com/p/openwrt-xburst/36715e6 | 08:57 |
qi-bot | [commit] Mirko Vogt: add <http://downloads.qi-hardware.com/software/mirror-openwrt-sources/> http://qi-hw.com/p/openwrt-xburst/b1a7200 | 08:57 |
qi-bot | [commit] Xiangfu Liu: optimize for ben nanonote http://qi-hw.com/p/openwrt-xburst/402a517 | 08:57 |
qi-bot | [commit] Xiangfu Liu: [xburst] Improve mounttime http://qi-hw.com/p/openwrt-xburst/807cc4b | 08:57 |
qi-bot | [commit] Xiangfu Liu: nanonote optimize http://qi-hw.com/p/openwrt-xburst/5f63507 | 08:57 |
qi-bot | [commit] Xiangfu Liu: Add-gfortran-compiler-support-to-the-toolchain http://qi-hw.com/p/openwrt-xburst/eaaf0bd | 08:57 |
qi-bot | [commit] kyak: add kernel patch for setfont2 http://qi-hw.com/p/openwrt-xburst/2703fe0 | 08:57 |
qi-bot | [commit] Xiangfu Liu: optimize for ben nanonote http://qi-hw.com/p/openwrt-xburst/ed08699 | 08:57 |
qi-bot | [commit] kyak: config-2.6.37: enable battery, disable RNDIS http://qi-hw.com/p/openwrt-xburst/8d85716 | 08:57 |
qi-bot | [commit] kyak: patches-2.6.37: support for Ben NAND partitioning http://qi-hw.com/p/openwrt-xburst/21c6371 | 08:57 |
qi-bot | [commit] David Kühling: linux kernel: add CONFIG_PROC_PAGE_MONITOR=y to allow for clean user-space DMA http://qi-hw.com/p/openwrt-xburst/1502cdd | 08:57 |
qi-bot | [commit] kyak: config-2.6.37: enable options needed for keymouse http://qi-hw.com/p/openwrt-xburst/89bf2df | 08:57 |
qi-bot | [commit] kyak: trunk: fix kernel keymap for VolUp/Down and Del http://qi-hw.com/p/openwrt-xburst/c27e043 | 08:57 |
qi-bot | [commit] kyak: trunk: build sound modules in kernel http://qi-hw.com/p/openwrt-xburst/c1d7c81 | 08:57 |
qi-bot | [commit] kyak: trunk: add ks7010 support patch http://qi-hw.com/p/openwrt-xburst/328d74a | 08:57 |
qi-bot | [commit] Xiangfu Liu: base-files, move it to openwrt-package/nanonote-files http://qi-hw.com/p/openwrt-xburst/0432ba5 | 08:57 |
qi-bot | [commit] Xiangfu Liu: optimize for ben nanonote http://qi-hw.com/p/openwrt-xburst/80fdec5 | 08:57 |
qi-bot | [commit] Xiangfu Liu: base-files, move it to openwrt-package/nanonote-files http://qi-hw.com/p/openwrt-xburst/920e585 | 08:57 |
qi-bot | [commit] Werner Almesberger: bin/fk: little helper script to flash the kernel via SSH or usbboot http://qi-hw.com/p/wernermisc/387e6dd | 13:35 |
qi-bot | [commit] Werner Almesberger: bin/ben, bin/jlime: helper scripts for network setup and SSH login http://qi-hw.com/p/wernermisc/6aace95 | 13:36 |
qi-bot | [commit] kyak: busybox in trunk has changed some unicode options http://qi-hw.com/p/openwrt-packages/ef1173e | 16:33 |
---|---|---|
qi-bot | [commit] nbd: ath9k: clean up tx fifo handling on ar9380 based hardware http://qi-hw.com/p/openwrt-xburst/3f884a8 | 17:54 |
qi-bot | [commit] hcg: [omap35xx]: Remove override of max80211.sh http://qi-hw.com/p/openwrt-xburst/bfa88b1 | 17:54 |
qi-bot | [commit] cshore: Simple typo for kmod- prefix in alix2 target makefile. http://qi-hw.com/p/openwrt-xburst/26031a8 | 17:54 |
qi-bot | [commit] nbd: ath9k: fix some locking issues in the tx fifo cleanup patch http://qi-hw.com/p/openwrt-xburst/f538e8b | 17:54 |
qi-bot | [commit] nbd: broadcom-wl: fix uninitialized variable http://qi-hw.com/p/openwrt-xburst/5917464 | 17:54 |
qi-bot | [commit] nbd: broadcom-wl: fix wild ssb_device accesses as pci_dev for legacy pci dma api http://qi-hw.com/p/openwrt-xburst/1d7d17d | 17:54 |
qi-bot | [commit] florian: [ar7] add GT701 LEDs support (#9382) http://qi-hw.com/p/openwrt-xburst/67af013 | 17:54 |
qi-bot | [commit] florian: [brcm63xx] add support for USR9108 LEDs (#9372) http://qi-hw.com/p/openwrt-xburst/af9b1e4 | 17:54 |
qi-bot | [commit] florian: [brcm63xx] add support for BT Voyager 2500 (#9070) http://qi-hw.com/p/openwrt-xburst/42c4ab0 | 17:54 |
qi-bot | [commit] florian: [kernel] refresh 2.6.37 patches http://qi-hw.com/p/openwrt-xburst/1a5f615 | 17:54 |
qi-bot | [commit] florian: [brcm63xx] add support for D-Link DVA-G3810BN/TL http://qi-hw.com/p/openwrt-xburst/d23e671 | 17:54 |
qi-bot | [commit] florian: [brcm63xx] refresh patches http://qi-hw.com/p/openwrt-xburst/4643cac | 17:54 |
qi-bot | [commit] florian: [brcm63xx] add support for DSL-2640B rev B2 http://qi-hw.com/p/openwrt-xburst/e053237 | 17:54 |
qi-bot | [commit] florian: [brcm63xx] add support for BT Voyager 2110 (#8810) http://qi-hw.com/p/openwrt-xburst/f75d3ae | 17:54 |
qi-bot | [commit] jow: [package] firewall: explictely mention network in default configuration, makes it less confusing http://qi-hw.com/p/openwrt-xburst/f3320c5 | 17:54 |
qi-bot | [commit] nbd: add LD_LIBRARY to cmake.mk http://qi-hw.com/p/openwrt-xburst/26e3904 | 17:54 |
qi-bot | [commit] jow: [package] iw: fix calculation of fractional multicast rates like 5.5Mbps due to wrong operator precedence http://qi-hw.com/p/openwrt-xburst/7a9dd45 | 17:54 |
qi-bot | [commit] jow: [package] ncurses: enable C++ bindings (#9442) http://qi-hw.com/p/openwrt-xburst/9a8b34e | 17:54 |
qi-bot | [commit] Xiangfu Liu: optimize for ben nanonote http://qi-hw.com/p/openwrt-xburst/49bceea | 17:54 |
qi-bot | [commit] Xiangfu Liu: base-files, move it to openwrt-package/nanonote-files http://qi-hw.com/p/openwrt-xburst/5397460 | 17:54 |
qi-bot | [commit] kyak: libpurple: initial port http://qi-hw.com/p/openwrt-packages/0cde876 | 18:02 |
qi-bot | [commit] kyak: centerim5: initial port http://qi-hw.com/p/openwrt-packages/d04c529 | 18:02 |
qi-bot | [commit] David Kühling: mplayer_jz47xx: upgrade to 0.1.5 version that supports /proc/<pid>/pagemap http://qi-hw.com/p/openwrt-packages/54ae318 | 18:36 |
qi-bot | [commit] David Kühling: mplayer_jz47xx: fix md5-sum for updated version http://qi-hw.com/p/openwrt-packages/46bda1e | 18:36 |
qi-bot | [commit] kyak: update ffmpeg to a working git revision http://qi-hw.com/p/openwrt-packages/73ca357 | 18:36 |
qi-bot | [commit] David Kühling: emacs: make programming language comments colored by default http://qi-hw.com/p/openwrt-packages/773dfe1 | 18:36 |
qi-bot | [commit] kyak: config.full_system: disable busybox's strings, enable binutils and http://qi-hw.com/p/openwrt-packages/4d609cd | 18:36 |
qi-bot | [commit] Xiangfu Liu: nanonote-files: data: files: add opkg.conf http://qi-hw.com/p/openwrt-packages/edcfe1e | 18:36 |
qi-bot | [commit] Neil Stockbridge: There is now a package for SDL API man pages http://qi-hw.com/p/openwrt-packages/aca02e1 | 18:36 |
qi-bot | [commit] Xiangfu Liu: nanonote-files: data: config.full_system: enable 'man' in busybox http://qi-hw.com/p/openwrt-packages/8606053 | 18:36 |
qi-bot | [commit] Neil Stockbridge: There is now a ( very simple) man page viewer that supports MANPATH http://qi-hw.com/p/openwrt-packages/e15a705 | 18:36 |
qi-bot | [commit] Neil Stockbridge: Merge branch 'master' of projects.qi-hardware.com:openwrt-packages http://qi-hw.com/p/openwrt-packages/5d8d83a | 18:36 |
qi-bot | [commit] Neil Stockbridge: The libsdl-doc-man Makefile is now more elegant http://qi-hw.com/p/openwrt-packages/62d7bcd | 18:36 |
qi-bot | [commit] Xiangfu Liu: nanonote-files: config.full_system: disable libxfce4util http://qi-hw.com/p/openwrt-packages/9b8498d | 18:36 |
qi-bot | [commit] Xiangfu Liu: stardict enalbe man page search http://qi-hw.com/p/openwrt-packages/c911cb2 | 18:36 |
qi-bot | [commit] Xiangfu Liu: nanonote-files: feeds.conf: disable useless feeds http://qi-hw.com/p/openwrt-packages/a4a100c | 18:36 |
qi-bot | [commit] Neil Stockbridge: libsdl-doc-man has been renamed to libsdl-dev and now includes header files http://qi-hw.com/p/openwrt-packages/1460a79 | 18:36 |
qi-bot | [commit] Neil Stockbridge: There is now a libncurses-dev package http://qi-hw.com/p/openwrt-packages/b9ee6f4 | 18:36 |
qi-bot | [commit] Xiangfu Liu: avrdude: remove BROKEN http://qi-hw.com/p/openwrt-packages/bfff7c1 | 18:36 |
qi-bot | [commit] kyak: Merge branch 'master' into trunk http://qi-hw.com/p/openwrt-packages/ad8ac99 | 18:36 |
qi-bot | [commit] Werner Almesberger: prod/doc/setup.fig: added an arrow to drawing for atusb flashing http://qi-hw.com/p/ben-wpan/21c70eb | 22:39 |
qi-bot | [commit] Werner Almesberger: prod/: added atusb-flash script and adapted infrastructure http://qi-hw.com/p/ben-wpan/e9d65fb | 22:39 |
qi-bot | [commit] Werner Almesberger: prod/doc/flash.html: described the flashing process http://qi-hw.com/p/ben-wpan/6adfd4b | 22:39 |
qi-bot | [commit] Werner Almesberger: prod/doc/analysis.html: emphasize that 1 MHz clock is normal without firmware http://qi-hw.com/p/ben-wpan/86ea428 | 22:39 |
qi-bot | [commit] Werner Almesberger: prod/doc/setup.html: added instructions for atusb flashing prerequisites http://qi-hw.com/p/ben-wpan/451fc8c | 22:39 |
qi-bot | [commit] Xiangfu Liu: avrdude: remove BROKEN http://qi-hw.com/p/openwrt-packages/bfff7c1 | 14:00 |
---|
qi-bot | [commit] Werner Almesberger: prod/doc/analysis.html: added borders to tables; use − http://qi-hw.com/p/ben-wpan/f52fbe1 | 13:03 |
---|---|---|
qi-bot | [commit] Werner Almesberger: prod/doc/analysis.html: we actually don't need to kill atrf-proxy for atrf-xtal http://qi-hw.com/p/ben-wpan/e0ac5c9 | 13:03 |
qi-bot | [commit] Werner Almesberger: prod/doc/setup.html: added reference clock count; fixed garbled sentence http://qi-hw.com/p/ben-wpan/68e56af | 13:03 |
qi-bot | [commit] Werner Almesberger: prod/: cleaned up atben clock frequency test http://qi-hw.com/p/ben-wpan/251a749 | 13:03 |
qi-bot | [commit] Werner Almesberger: prod/doc/: added atrf-xtal run time; some minor cleanup http://qi-hw.com/p/ben-wpan/aa75581 | 13:03 |
qi-bot | [commit] Werner Almesberger: prod/doc/setup.html: put sections in a more logical order http://qi-hw.com/p/ben-wpan/e605d27 | 13:03 |
qi-bot | [commit] Werner Almesberger: tools/atrf-xtal/: new option -b for relative result; -p for pass/fail http://qi-hw.com/p/ben-wpan/ff6c834 | 02:05 |
---|---|---|
qi-bot | [commit] Werner Almesberger: prod/doc/analysis.html: added precision clock measurement for atben http://qi-hw.com/p/ben-wpan/d2fda37 | 02:05 |
qi-bot | [commit] Werner Almesberger: prod/Makefile (ben): used simplified setup with only one atben and one atusb http://qi-hw.com/p/ben-wpan/6446a6e | 02:05 |
qi-bot | [commit] Werner Almesberger: prod/doc/setup.html: corrected mangled sentence http://qi-hw.com/p/ben-wpan/dc40ff6 | 02:05 |
qi-bot | [commit] Neil Stockbridge: libsdl-doc-man has been renamed to libsdl-dev and now includes header files http://qi-hw.com/p/openwrt-packages/1460a79 | 02:21 |
qi-bot | [commit] Werner Almesberger: prod/doc/analysis.html: more material on checking the supply voltages http://qi-hw.com/p/ben-wpan/47b710d | 17:31 |
qi-bot | [commit] Werner Almesberger: atusb: varistor Vdc was off by 100 mV; made it clearer that we use Vdc, not Vb http://qi-hw.com/p/ben-wpan/926ed26 | 17:31 |
qi-bot | [commit] Neil Stockbridge: There is now a libncurses-dev package http://qi-hw.com/p/openwrt-packages/b9ee6f4 | 23:53 |
qi-bot | [commit] Werner Almesberger: prod/doc: some initial test process documentation (still very incomplete) http://qi-hw.com/p/ben-wpan/d0ab9d9 | 03:21 |
---|---|---|
qi-bot | [commit] Werner Almesberger: prod/atusb: separated flashing from testing; added enumeration and ID test http://qi-hw.com/p/ben-wpan/32744af | 03:21 |
qi-bot | [commit] Werner Almesberger: prod/Common (expect, expect_re): allow multiple arguments (for options) http://qi-hw.com/p/ben-wpan/c2163a6 | 03:21 |
qi-bot | [commit] Werner Almesberger: prod/doc/flow.fig: draw feedback (information vs. physical items) dashed http://qi-hw.com/p/ben-wpan/b9a3054 | 03:21 |
qi-bot | [commit] Werner Almesberger: tools/lib/atnet.c (atnet_set_clkm): corrected return code (1 means success here) http://qi-hw.com/p/ben-wpan/b24a189 | 03:21 |
qi-bot | [commit] Neil Stockbridge: There is now a ( very simple) man page viewer that supports MANPATH http://qi-hw.com/p/openwrt-packages/e15a705 | 04:26 |
qi-bot | [commit] Neil Stockbridge: Merge branch 'master' of projects.qi-hardware.com:openwrt-packages http://qi-hw.com/p/openwrt-packages/5d8d83a | 04:26 |
qi-bot | [commit] Neil Stockbridge: The libsdl-doc-man Makefile is now more elegant http://qi-hw.com/p/openwrt-packages/62d7bcd | 07:17 |
qi-bot | [commit] Xiangfu Liu: nanonote-files: config.full_system: disable libxfce4util http://qi-hw.com/p/openwrt-packages/9b8498d | 07:32 |
qi-bot | [commit] Xiangfu Liu: stardict enalbe man page search http://qi-hw.com/p/openwrt-packages/c911cb2 | 07:32 |
qi-bot | [commit] Xiangfu Liu: nanonote-files: config.full_system: disable libxfce4util http://qi-hw.com/p/openwrt-packages/cd2b5dc | 07:32 |
qi-bot | [commit] Xiangfu Liu: nanonote-files: feeds.conf: disable useless feeds http://qi-hw.com/p/openwrt-packages/2a5cc31 | 07:44 |
qi-bot | [commit] Xiangfu Liu: nanonote-files: feeds.conf: disable useless feeds http://qi-hw.com/p/openwrt-packages/a4a100c | 07:45 |
qi-bot | [commit] Werner Almesberger: prod/doc/index.html: more fault analysis, mainly clock frequency http://qi-hw.com/p/ben-wpan/e86997e | 19:50 |
qi-bot | [commit] Werner Almesberger: tools/lib/: new helper function for daemonification http://qi-hw.com/p/ben-wpan/43f179d | 19:50 |
qi-bot | [commit] Werner Almesberger: tools/atrf-proxy/atrf-proxy.c: new option -b to background/daemonize http://qi-hw.com/p/ben-wpan/1bfe86a | 19:50 |
qi-bot | [commit] Werner Almesberger: prod/doc/index.html: added section separators; expanded setup section http://qi-hw.com/p/ben-wpan/f5b1693 | 19:50 |
qi-bot | [commit] Werner Almesberger: tools/dirtpan/dirtpan.c: new option -b to background/daemonize http://qi-hw.com/p/ben-wpan/81a8e13 | 19:50 |
qi-bot | [commit] Werner Almesberger: prod/doc/index.html: split into one file per topic http://qi-hw.com/p/ben-wpan/e11d7b1 | 19:50 |
qi-bot | [commit] Werner Almesberger: prod/doc/: adjusted heading level and section separators of topic pages http://qi-hw.com/p/ben-wpan/3d2bed5 | 19:50 |
qi-bot | [commit] Werner Almesberger: prod/doc/: added up/prev/next links to topic pages http://qi-hw.com/p/ben-wpan/430a296 | 19:50 |
qi-bot | [commit] Werner Almesberger: tools/atrf-xmit/atrf-xmit.c (xfer_one, usage, main): new option -v (verbose) http://qi-hw.com/p/ben-wpan/558017e | 19:50 |
qi-bot | [commit] Neil Stockbridge: There is now a package for SDL API man pages http://qi-hw.com/p/openwrt-packages/aca02e1 | 01:11 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: nanonote-files: data: config.full_system: enable 'man' in busybox http://qi-hw.com/p/openwrt-packages/8606053 | 02:33 |
qi-bot | [commit] Werner Almesberger: mlt/wpan-ipv4/: demo setup and editing process for the wpan-ipv4 video http://qi-hw.com/p/wernermisc/5ae2c46 | 05:58 |
---|---|---|
qi-bot | [commit] kyak: trunk: add ks7010 support patch http://qi-hw.com/p/openwrt-xburst/8cfd90c | 08:21 |
qi-bot | [commit] kyak: ks7010: support kernel > 2.6.35 http://qi-hw.com/p/openwrt-packages/822e1e0 | 08:21 |
qi-bot | [commit] kyak: config.full_system: disable busybox's strings, enable binutils and http://qi-hw.com/p/openwrt-packages/4d609cd | 10:29 |
qi-bot | [commit] David Kühling: emacs: make programming language comments colored by default http://qi-hw.com/p/openwrt-packages/32e4ab8 | 10:36 |
qi-bot | [commit] kyak: config.full_system: disable busybox's strings, enable binutils and http://qi-hw.com/p/openwrt-packages/05e9503 | 10:36 |
qi-bot | [commit] Xiangfu Liu: nanonote-files: data: files: add opkg.conf http://qi-hw.com/p/openwrt-packages/edcfe1e | 14:43 |
qi-bot | [commit] Xiangfu Liu: base-files, move it to openwrt-package/nanonote-files http://qi-hw.com/p/openwrt-xburst/882885f | 14:44 |
qi-bot | [commit] Xiangfu Liu: base-files, move it to openwrt-package/nanonote-files http://qi-hw.com/p/openwrt-xburst/1d6c83b | 14:44 |
qi-bot | [commit] kyak: config-2.6.37: enable options needed for keymouse http://qi-hw.com/p/openwrt-xburst/221ff09 | 09:51 |
---|---|---|
qi-bot | [commit] David Kühling: linux-kernel (master): add CONFIG_PROC_PAGE_MONITOR=y for cleaner DMA support http://qi-hw.com/p/openwrt-xburst/4cb562b | 11:11 |
qi-bot | [commit] kyak: trunk: fix kernel keymap for VolUp/Down and Del http://qi-hw.com/p/openwrt-xburst/5974e6b | 11:58 |
qi-bot | [commit] kyak: ben-cyrillic: fix keymap for VolUp/VolDown http://qi-hw.com/p/openwrt-packages/38ada8f | 12:00 |
qi-bot | [commit] kyak: keymouse: fix keymap for VolUp/VolDown http://qi-hw.com/p/openwrt-packages/3c53b09 | 12:00 |
qi-bot | [commit] kyak: trunk: build sound modules in kernel http://qi-hw.com/p/openwrt-xburst/5a29baa | 13:14 |
qi-bot | [commit] kyak: fix typo from the previous commit -\ http://qi-hw.com/p/openwrt-xburst/d476d08 | 13:16 |
qi-bot | [commit] cshore: This patch provides an image suitable for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's. http://qi-hw.com/p/openwrt-xburst/33f2d48 | 13:35 |
qi-bot | [commit] cshore: Add missed files from previous commit: This patch provides an image suitable for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's. http://qi-hw.com/p/openwrt-xburst/0118ba5 | 13:35 |
qi-bot | [commit] cshore: [x86] Removed Alix.mk profile which was accidently left as an empty file applying the patch during r26879 and r26880. http://qi-hw.com/p/openwrt-xburst/806e48f | 13:35 |
qi-bot | [commit] hcg: [omap35xx] Squash uids http://qi-hw.com/p/openwrt-xburst/6680382 | 13:35 |
qi-bot | [commit] hcg: [omap35xx]: Add new defconfig and profile for es variant http://qi-hw.com/p/openwrt-xburst/b72f880 | 13:35 |
qi-bot | [commit] hcg: Correct libc path http://qi-hw.com/p/openwrt-xburst/c7cd315 | 13:35 |
qi-bot | [commit] Mirko Vogt: add <http://downloads.qi-hardware.com/software/mirror-openwrt-sources/> http://qi-hw.com/p/openwrt-xburst/a2935f2 | 13:35 |
qi-bot | [commit] Xiangfu Liu: optimize for ben nanonote http://qi-hw.com/p/openwrt-xburst/f446b1b | 13:35 |
qi-bot | [commit] Xiangfu Liu: [xburst] Improve mounttime http://qi-hw.com/p/openwrt-xburst/8a0023b | 13:35 |
qi-bot | [commit] Xiangfu Liu: nanonote optimize http://qi-hw.com/p/openwrt-xburst/84cccdf | 13:35 |
qi-bot | [commit] Xiangfu Liu: Add-gfortran-compiler-support-to-the-toolchain http://qi-hw.com/p/openwrt-xburst/2faacbc | 13:35 |
qi-bot | [commit] kyak: add kernel patch for setfont2 http://qi-hw.com/p/openwrt-xburst/e5c7eb5 | 13:35 |
qi-bot | [commit] Xiangfu Liu: optimize for ben nanonote http://qi-hw.com/p/openwrt-xburst/a359f18 | 13:35 |
qi-bot | [commit] kyak: config-2.6.37: enable battery, disable RNDIS http://qi-hw.com/p/openwrt-xburst/7f543fb | 13:35 |
qi-bot | [commit] kyak: patches-2.6.37: support for Ben NAND partitioning http://qi-hw.com/p/openwrt-xburst/35dc6c4 | 13:35 |
qi-bot | [commit] David Kühling: linux kernel: add CONFIG_PROC_PAGE_MONITOR=y to allow for clean user-space DMA http://qi-hw.com/p/openwrt-xburst/95c91ff | 13:35 |
qi-bot | [commit] kyak: config-2.6.37: enable options needed for keymouse http://qi-hw.com/p/openwrt-xburst/5f2d546 | 13:35 |
qi-bot | [commit] kyak: trunk: fix kernel keymap for VolUp/Down and Del http://qi-hw.com/p/openwrt-xburst/cb40b21 | 13:35 |
qi-bot | [commit] kyak: trunk: build sound modules in kernel http://qi-hw.com/p/openwrt-xburst/a85f9e8 | 13:35 |
qi-bot | [commit] kyak: fix typo from the previous commit -\ http://qi-hw.com/p/openwrt-xburst/19c8cd7 | 13:35 |
qi-bot | [commit] Maarten ter Huurne: Isolate all PNG loading in a separate source/header. http://qi-hw.com/p/gmenu2x/e6be835 | 00:15 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: Minor cleanups in SFontPlus and ASFont. http://qi-hw.com/p/gmenu2x/c54dec9 | 00:15 |
qi-bot | [commit] Maarten ter Huurne: Introduced enums for text alignment in the ASFont class. http://qi-hw.com/p/gmenu2x/a35a7e2 | 00:15 |
qi-bot | [commit] Maarten ter Huurne: ASFont: moved SFontPlus code into ASFont source files. http://qi-hw.com/p/gmenu2x/ec5d426 | 00:15 |
qi-bot | [commit] Maarten ter Huurne: ASFont: simplified object initialization and cleanup. http://qi-hw.com/p/gmenu2x/492a36b | 00:15 |
qi-bot | [commit] Maarten ter Huurne: ASFont: removed precalculation of half heights. http://qi-hw.com/p/gmenu2x/e4b7113 | 00:15 |
qi-bot | [commit] Maarten ter Huurne: ASFont: have a single routine for computing text width that also handles newlines. http://qi-hw.com/p/gmenu2x/ff546cd | 00:15 |
qi-bot | [commit] Maarten ter Huurne: ASFont: cleanups in text write methods. http://qi-hw.com/p/gmenu2x/1bc5539 | 00:15 |
qi-bot | [commit] Maarten ter Huurne: ASFont: merged SFontPlus class into ASFont class. http://qi-hw.com/p/gmenu2x/b4f3cde | 00:15 |
qi-bot | [commit] Maarten ter Huurne: ASFont: removed duplication of horizontal alignment code. http://qi-hw.com/p/gmenu2x/bff04d2 | 00:15 |
qi-bot | [commit] Maarten ter Huurne: Merge branch 'master' of projects.qi-hardware.com:gmenu2x http://qi-hw.com/p/gmenu2x/8592038 | 00:15 |
qi-bot | [commit] Maarten ter Huurne: Fixed debug print. http://qi-hw.com/p/gmenu2x/db5ebff | 00:15 |
qi-bot | [commit] Maarten ter Huurne: ASFont: only convert font surface if it is not already in a 32bpp format. http://qi-hw.com/p/gmenu2x/41e6e46 | 00:15 |
qi-bot | [commit] Maarten ter Huurne: ASFont: access font pixels efficiently. http://qi-hw.com/p/gmenu2x/a382a42 | 00:15 |
qi-bot | [commit] Werner Almesberger: init/main.c: try to run OpenWRT's /etc/preinit (HACK) http://qi-hw.com/p/qi-kernel/4988bf2 | 17:37 |
qi-bot | [commit] Werner Almesberger: IEEE 802.15.4: make debugging messages configurable http://qi-hw.com/p/qi-kernel/9f9b8e6 | 17:37 |
qi-bot | [commit] Werner Almesberger: install/ben-wpan-config-2.6.38: disable noisy debugging and enable TUN http://qi-hw.com/p/ben-wpan/707af5f | 17:37 |
qi-bot | [commit] Werner Almesberger: tools/dirtpan/: rewritten for simultaneous reception and transmission http://qi-hw.com/p/ben-wpan/7e2c576 | 20:04 |
qi-bot | [commit] Werner Almesberger: install/: added build and usage instructions for dirtpan http://qi-hw.com/p/ben-wpan/601d1bf | 20:07 |
qi-bot | [commit] David Kühling: emacs: make programming language comments colored by default http://qi-hw.com/p/openwrt-packages/773dfe1 | 20:44 |
qi-bot | [commit] Werner Almesberger: tools/lib/usbopen.h: moved to tools/include/, to allow for sharing http://qi-hw.com/p/ben-wpan/6fc2128 | 08:31 |
---|---|---|
qi-bot | [commit] Werner Almesberger: libatrf: new function usb_rescan to force next open_usb to scan tree again http://qi-hw.com/p/ben-wpan/3deac41 | 08:31 |
qi-bot | [commit] Werner Almesberger: tools/lib/usbopen.c: make vendor and/or product optional http://qi-hw.com/p/ben-wpan/55d220b | 08:31 |
qi-bot | [commit] Werner Almesberger: tools/usbwait/: new tool to wait for a USB device to appear http://qi-hw.com/p/ben-wpan/7037858 | 08:31 |
qi-bot | [commit] Werner Almesberger: tools/usbwait/usbwait.c: new option -r to require removal before appearance http://qi-hw.com/p/ben-wpan/62a03bb | 08:31 |
qi-bot | [commit] Werner Almesberger: atusb/fw/Makefile: new target "update" to update the application via DFU http://qi-hw.com/p/ben-wpan/b82db55 | 08:31 |
qi-bot | [commit] Werner Almesberger: tools/dirtpan/: quick and dirty IPv4 over 802.15.4 tunnel (in progress) http://qi-hw.com/p/ben-wpan/dbad7ae | 10:40 |
qi-bot | [commit] David Kühling: linux kernel: add CONFIG_PROC_PAGE_MONITOR=y to allow for clean user-space DMA http://qi-hw.com/p/openwrt-xburst/e9141de | 13:50 |
qi-bot | [commit] David Kühling: mplayer_jz47xx: upgrade to 0.1.5 version that supports /proc/<pid>/pagemap http://qi-hw.com/p/openwrt-packages/54ae318 | 16:37 |
qi-bot | [commit] David Kühling: mplayer_jz47xx: fix md5-sum for updated version http://qi-hw.com/p/openwrt-packages/46bda1e | 16:38 |
qi-bot | [commit] kyak: update ffmpeg to a working git revision http://qi-hw.com/p/openwrt-packages/73ca357 | 17:10 |
qi-bot | [commit] David Kühling: mplayer_jz47xx: upgrade to 0.1.5 version that supports /proc/<pid>/pagemap http://qi-hw.com/p/openwrt-packages/36bcb9e | 17:39 |
qi-bot | [commit] David Kühling: mplayer_jz47xx: fix md5-sum for updated version http://qi-hw.com/p/openwrt-packages/f342c3b | 17:39 |
qi-bot | [commit] kyak: update ffmpeg to a working git revision http://qi-hw.com/p/openwrt-packages/71d83e9 | 17:39 |
qi-bot | [commit] Werner Almesberger: tools/dirtpan/: -d now generates terse output; -d -d dumps full content http://qi-hw.com/p/ben-wpan/29e56c7 | 19:51 |
qi-bot | [commit] Werner Almesberger: tools/dirtpan/: introduced terse debug messages also for timeouts http://qi-hw.com/p/ben-wpan/a1a508e | 19:51 |
qi-bot | [commit] Werner Almesberger: tools/dirtpan/dirtpan.c (open_net): turn off WPAN_WANTACK http://qi-hw.com/p/ben-wpan/171500e | 19:51 |
qi-bot | [commit] Werner Almesberger: tools/dirtpan/dirtpan.c (timeout): fencepost error when normalizing tv_usec http://qi-hw.com/p/ben-wpan/354789d | 19:51 |
qi-bot | [commit] Werner Almesberger: tools/dirtpan/dirtpan.c (rx_pck): immediately ack all data packets http://qi-hw.com/p/ben-wpan/2c7d06f | 19:51 |
qi-bot | [commit] Werner Almesberger: tools/dirtpan/dirtpan.c (rx_pck): break tie if both sides are in s_tx http://qi-hw.com/p/ben-wpan/e17881c | 19:51 |
qi-bot | [commit] Werner Almesberger: tools/dirtpan/: if given an interface conf command, run it with tunX in $ITF http://qi-hw.com/p/ben-wpan/de72af3 | 19:51 |
qi-bot | [commit] Werner Almesberger: atrf-xtal/atben.c: mention that the AT86RF230 driver can also be disabled http://qi-hw.com/p/ben-wpan/d184d1d | 01:06 |
---|---|---|
qi-bot | [commit] Werner Almesberger: tools/lib/atben.c (atben_open): corrected comment claiming the clock was 316 MHz http://qi-hw.com/p/ben-wpan/89bcd3c | 01:06 |
qi-bot | [commit] Werner Almesberger: atrf-xtal/atben.c: added missing #include; corrected garbled comment http://qi-hw.com/p/ben-wpan/180603e | 01:06 |
qi-bot | [commit] Werner Almesberger: atusb/fw/Makefile (.PHONY): added development-only phony targets http://qi-hw.com/p/ben-wpan/c5992bc | 01:06 |
qi-bot | [commit] Werner Almesberger: atusb/fw: fixed USB bus reset handling by software http://qi-hw.com/p/ben-wpan/eeb3af6 | 01:06 |
qi-bot | [commit] Werner Almesberger: atusb/fw/Makefile (dfu): pass transfer size to hide DFU non-compliance http://qi-hw.com/p/ben-wpan/0db361d | 01:06 |
qi-bot | [commit] Werner Almesberger: atusb/fw/README: updated for complete firmware upload process http://qi-hw.com/p/ben-wpan/1f99435 | 01:06 |
qi-bot | [commit] Werner Almesberger: BOOKSHELF (dfu): added DFU specification http://qi-hw.com/p/ben-wpan/487011f | 02:53 |
qi-bot | [commit] Werner Almesberger: atusb/fw/README: boot loader flashing time was a bit too optimistic (15 -> 30 s) http://qi-hw.com/p/ben-wpan/6179f31 | 02:53 |
qi-bot | [commit] Werner Almesberger: atusb/fw: implemented ATUSB_RESET http://qi-hw.com/p/ben-wpan/42dae8d | 02:53 |
qi-bot | [commit] Werner Almesberger: tools/Makefile.common (CFLAGS): added -g http://qi-hw.com/p/ben-wpan/27c1c7b | 02:53 |
qi-bot | [commit] Xiangfu Liu: disable CONFIG_ALL, add Tile and gottet http://qi-hw.com/p/openwrt-xburst/646a755 | 15:06 |
qi-bot | [commit] kyak: config.full_system: add supertux, terminus-font http://qi-hw.com/p/openwrt-xburst/50f9a1c | 15:06 |
qi-bot | [commit] kyak: config.full_system: build gcc-mips, make, binutils as modules. Remove http://qi-hw.com/p/openwrt-xburst/3af99c1 | 15:06 |
qi-bot | [commit] kyak: config.full_system: remove "=m" packages http://qi-hw.com/p/openwrt-xburst/ee6568b | 15:06 |
qi-bot | [commit] kyak: don't include ghostscript and fbgs into rootfs, build as modules http://qi-hw.com/p/openwrt-xburst/1c3204f | 15:06 |
qi-bot | [commit] David Kühling: config.full_system: fix name of gnuplot package (was renamed a long time ago) http://qi-hw.com/p/openwrt-xburst/a886837 | 15:06 |
qi-bot | [commit] Xiangfu Liu: add zgv, MPlayer, brainless http://qi-hw.com/p/openwrt-xburst/c891a53 | 15:06 |
qi-bot | [commit] Xiangfu Liu: remove custum banner, focus on 100% upstream, http://qi-hw.com/p/openwrt-xburst/22c0efa | 15:06 |
qi-bot | [commit] kyak: config.full_system: add setterm http://qi-hw.com/p/openwrt-xburst/766e019 | 15:06 |
qi-bot | [commit] kyak: config.full_system: include GNU tar http://qi-hw.com/p/openwrt-xburst/890af2e | 15:06 |
qi-bot | [commit] Lars-Peter Clausen: [package] ks7010: Remove debug printks http://qi-hw.com/p/openwrt-xburst/2c9e6dc | 15:06 |
qi-bot | [commit] Lars-Peter Clausen: [xburst] jz_mmc: Drop warning about spares irqs. http://qi-hw.com/p/openwrt-xburst/44fe479 | 15:06 |
qi-bot | [commit] Lars-Peter Clausen: [xburst] Improve mounttime. http://qi-hw.com/p/openwrt-xburst/5629baf | 15:06 |
qi-bot | [commit] kyak: have sound modules built in kernel http://qi-hw.com/p/openwrt-xburst/0cd3169 | 15:06 |
qi-bot | [commit] Xiangfu Liu: reflash_ben.sh, new option b k r, reboot device after reflash http://qi-hw.com/p/openwrt-xburst/9ef5915 | 15:06 |
qi-bot | [commit] kyak: add sound options to default config, so that it won't popup http://qi-hw.com/p/openwrt-xburst/b33d46b | 15:06 |
qi-bot | [commit] Xiangfu Liu: config.full_system: add openssh-sftp-server http://qi-hw.com/p/openwrt-xburst/8589594 | 15:06 |
qi-bot | [commit] Xiangfu Liu: update opkg.conf, don't using /tmp keep packages information http://qi-hw.com/p/openwrt-xburst/d87c246 | 15:06 |
qi-bot | [commit] kyak: config.full_system: busybox enhancements http://qi-hw.com/p/openwrt-xburst/278a1a3 | 15:06 |
qi-bot | [commit] kyak: config.full_system: more busybox options http://qi-hw.com/p/openwrt-xburst/66f1993 | 15:06 |
qi-bot | [commit] Mirko Vogt: add <http://downloads.qi-hardware.com/software/mirror-openwrt-sources/> http://qi-hw.com/p/openwrt-xburst/d3d6c3c | 15:10 |
qi-bot | [commit] Xiangfu Liu: gitignore vim temporary files (*~) http://qi-hw.com/p/openwrt-xburst/996641d | 15:10 |
qi-bot | [commit] Xiangfu Liu: optimize for ben nanonote http://qi-hw.com/p/openwrt-xburst/00b6865 | 15:10 |
qi-bot | [commit] Xiangfu Liu: [xburst] Improve mounttime http://qi-hw.com/p/openwrt-xburst/4006bc6 | 15:10 |
qi-bot | [commit] Xiangfu Liu: nanonote optimize http://qi-hw.com/p/openwrt-xburst/9454528 | 15:10 |
qi-bot | [commit] Xiangfu Liu: Add-gfortran-compiler-support-to-the-toolchain http://qi-hw.com/p/openwrt-xburst/02a7dc8 | 15:10 |
qi-bot | [commit] kyak: add kernel patch for setfont2 http://qi-hw.com/p/openwrt-xburst/a972bf1 | 15:10 |
qi-bot | [commit] juhosg: ar71xx: ag71xx: add debugfs entry for [rt]x_ring http://qi-hw.com/p/openwrt-xburst/e5061b1 | 15:16 |
qi-bot | [commit] hauke: brcm47xx: update patches http://qi-hw.com/p/openwrt-xburst/26205d1 | 15:16 |
qi-bot | [commit] jow: [package] base-files: retrigger usb coldplug after module loading, solves usb_modeswitch on boot and possibly others (#9352) http://qi-hw.com/p/openwrt-xburst/6f14855 | 15:16 |
qi-bot | [commit] juhosg: ar71xx: ag71xx: fix build error if debugfs is enabled http://qi-hw.com/p/openwrt-xburst/1408889 | 15:16 |
qi-bot | [commit] juhosg: ar71xx: ag71xx: fix section mismatch warnings http://qi-hw.com/p/openwrt-xburst/0511a7a | 15:16 |
qi-bot | [commit] juhosg: ar71xx: ag71xx: make switch register access atomic http://qi-hw.com/p/openwrt-xburst/bb14a2f | 15:16 |
qi-bot | [commit] thepeople: Deployment of IPv6 has opened up many more prefixes than just the http://qi-hw.com/p/openwrt-xburst/28e2aae | 15:16 |
qi-bot | [commit] thepeople: [PATCH] ipv6: restore correct ECN handling on TCP xmit http://qi-hw.com/p/openwrt-xburst/318f8f9 | 15:16 |
qi-bot | [commit] juhosg: ar71xx: remove superfluous fifo_cfg overrides http://qi-hw.com/p/openwrt-xburst/5b6a159 | 15:16 |
qi-bot | [commit] juhosg: ar71xx: use phy0tpt trigger for the WLAN LEDs http://qi-hw.com/p/openwrt-xburst/a1c5a3d | 15:16 |
qi-bot | [commit] juhosg: ar71xx: add uci config for the WLAN LED on the WRT160NL http://qi-hw.com/p/openwrt-xburst/b3a8c8a | 15:16 |
qi-bot | [commit] juhosg: ar71xx: populate LED3 on the JA76PF board http://qi-hw.com/p/openwrt-xburst/b500b67 | 15:16 |
qi-bot | [commit] blogic: [PATCH v3] (respin) 802.1Q VLAN support for ADM6996M/ADM6996FC http://qi-hw.com/p/openwrt-xburst/10f03e0 | 15:16 |
qi-bot | [commit] blogic: [kernel/modules] http://qi-hw.com/p/openwrt-xburst/a375812 | 15:16 |
qi-bot | [commit] Mirko Vogt: add <http://downloads.qi-hardware.com/software/mirror-openwrt-sources/> http://qi-hw.com/p/openwrt-xburst/9a2454c | 15:16 |
qi-bot | [commit] Xiangfu Liu: optimize for ben nanonote http://qi-hw.com/p/openwrt-xburst/1bbdd7e | 15:16 |
qi-bot | [commit] Xiangfu Liu: [xburst] Improve mounttime http://qi-hw.com/p/openwrt-xburst/4b70843 | 15:16 |
qi-bot | [commit] Xiangfu Liu: nanonote optimize http://qi-hw.com/p/openwrt-xburst/5971cea | 15:16 |
qi-bot | [commit] Xiangfu Liu: Add-gfortran-compiler-support-to-the-toolchain http://qi-hw.com/p/openwrt-xburst/bb1f5f9 | 15:16 |
qi-bot | [commit] kyak: add kernel patch for setfont2 http://qi-hw.com/p/openwrt-xburst/ec0ff60 | 15:16 |
qi-bot | [commit] kyak: alsa-lib: no need for this patch in trunk http://qi-hw.com/p/openwrt-packages/09d5d02 | 15:53 |
qi-bot | [commit] kyak: ncursesw is perfectly fine in openwrt trunk, no need to override http://qi-hw.com/p/openwrt-packages/1d17965 | 15:56 |
qi-bot | [commit] kyak: triggersad is now happy again! http://qi-hw.com/p/openwrt-packages/ed48679 | 15:57 |
qi-bot | [commit] kyak: guile: fix compilation in trunk http://qi-hw.com/p/openwrt-packages/ec6b1e7 | 16:00 |
qi-bot | [commit] kyak: gnuplot-gfx: fix compilation issue in trunk http://qi-hw.com/p/openwrt-packages/17d05bb | 16:43 |
qi-bot | [commit] Mirko Vogt: add <http://downloads.qi-hardware.com/software/mirror-openwrt-sources/> http://qi-hw.com/p/openwrt-xburst/d3d6c3c | 16:47 |
qi-bot | [commit] Xiangfu Liu: gitignore vim temporary files (*~) http://qi-hw.com/p/openwrt-xburst/996641d | 16:47 |
qi-bot | [commit] Xiangfu Liu: optimize for ben nanonote http://qi-hw.com/p/openwrt-xburst/00b6865 | 16:47 |
qi-bot | [commit] Xiangfu Liu: [xburst] Improve mounttime http://qi-hw.com/p/openwrt-xburst/4006bc6 | 16:47 |
qi-bot | [commit] Xiangfu Liu: nanonote optimize http://qi-hw.com/p/openwrt-xburst/9454528 | 16:47 |
qi-bot | [commit] Xiangfu Liu: Add-gfortran-compiler-support-to-the-toolchain http://qi-hw.com/p/openwrt-xburst/02a7dc8 | 16:47 |
qi-bot | [commit] kyak: add kernel patch for setfont2 http://qi-hw.com/p/openwrt-xburst/a972bf1 | 16:47 |
qi-bot | [commit] kyak: Merge branch 'trunk' of projects.qi-hardware.com:openwrt-xburst into trunk http://qi-hw.com/p/openwrt-xburst/08cc62a | 16:47 |
qi-bot | [commit] kyak: config-2.6.37: enable battery, disable RNDIS http://qi-hw.com/p/openwrt-xburst/9fb09d6 | 16:47 |
qi-bot | [commit] kyak: patches-2.6.37: support for Ben NAND partitioning http://qi-hw.com/p/openwrt-xburst/c80e807 | 16:49 |
qi-bot | [commit] Werner Almesberger: avrdude/README: added build instructions for making a static executable http://qi-hw.com/p/ben-blinkenlights/cd3dbc0 | 20:48 |
qi-bot | [commit] Werner Almesberger: atusb/fw/usb/dfu.c (dfu): lowered bwPollTimeout from 1 s to 100 ms and explained why http://qi-hw.com/p/ben-wpan/fc1a334 | 20:48 |
qi-bot | [commit] Werner Almesberger: atusb/fw/boot.c (main): don't time out until there is an application http://qi-hw.com/p/ben-wpan/ddd0022 | 20:48 |
qi-bot | [commit] Werner Almesberger: atusb/fw/Makefile (dfu): our functional descriptor is fine, no need for -t http://qi-hw.com/p/ben-wpan/fd91546 | 20:48 |
qi-bot | [commit] Werner Almesberger: atusb/fw: use the unique serial number of the ATmega8/16/32U2 for iSerialNumber http://qi-hw.com/p/ben-wpan/85f60de | 20:48 |
qi-bot | [commit] Lars-Peter Clausen: MIPS: JZ4740: Convert to new irq functions http://qi-hw.com/p/qi-kernel/e7c93ce | 21:43 |
qi-bot | [commit] Lars-Peter Clausen: MIPS: JZ4740: GPIO: Use common irq chip for all gpios http://qi-hw.com/p/qi-kernel/bd61961 | 21:43 |
qi-bot | [commit] Lars-Peter Clausen: MIPS: JZ4740: Set one-shot feature flag for the clockevent http://qi-hw.com/p/qi-kernel/b0a5336 | 21:43 |
qi-bot | [commit] Werner Almesberger: Merge branch 'jz-2.6.38' of projects.qi-hardware.com:qi-kernel into ben-wpan http://qi-hw.com/p/qi-kernel/f87f20d | 21:43 |
qi-bot | [commit] Ayla: The log.txt file will now be saved on the user-specific directory. http://qi-hw.com/p/gmenu2x/3998e19 | 17:22 |
---|
qi-bot | [commit] Werner Almesberger: ubb-vga/web/: generate a Web page describing UBB-VGA (im progress) http://qi-hw.com/p/ben-blinkenlights/64e74ab | 07:52 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ubb-vga/web/index.html: some changes in wording and text structure http://qi-hw.com/p/ben-blinkenlights/3f054e1 | 08:17 |
qi-bot | [commit] Werner Almesberger: ubb-vga/web/index.html: minor wording improvement; give images more space http://qi-hw.com/p/ben-blinkenlights/0937c4a | 08:23 |
qi-bot | [commit] Werner Almesberger: ubb-vga/web/: link to medium-size images, not full size; some rewording http://qi-hw.com/p/ben-blinkenlights/91bc5ea | 12:56 |
qi-bot | [commit] Werner Almesberger: ubb-vga/web/index.html: added links to #qi-hardware and the mailing list http://qi-hw.com/p/ben-blinkenlights/f1efa9e | 13:22 |
qi-bot | [commit] Werner Almesberger: index.html: moved author's name; file format of images we can load was incorrect http://qi-hw.com/p/ben-blinkenlights/88e09d0 | 17:03 |
qi-bot | [commit] Werner Almesberger: ubb-vga/web/index.html: correction - it's the response we fake, not the "busy" http://qi-hw.com/p/ben-blinkenlights/19c0440 | 22:56 |
qi-bot | [commit] Werner Almesberger: ubb-vga.c: moved timer setup and LCD disabling into noirq setup http://qi-hw.com/p/ben-blinkenlights/f7e8fbb | 23:25 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ubb-vga: new option -2 to keep on refreshing the LCD display (experimental) http://qi-hw.com/p/ben-blinkenlights/ba1d297 | 23:25 |
qi-bot | [commit] Werner Almesberger: ubb-vga: added draft for "productized" design http://qi-hw.com/p/ben-blinkenlights/6f5a8cc | 17:17 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ubb-vga: added draft of "productized" assembly http://qi-hw.com/p/ben-blinkenlights/3b4f72d | 17:17 |
qi-bot | [commit] Werner Almesberger: ubb-vga/Makefile (vga-ben-back.png): also generate the PCB back side image http://qi-hw.com/p/ben-blinkenlights/6c3adaf | 17:18 |
qi-bot | [commit] David Kühling: libtheora: add our own version of libtheora, better tuned for NanoNote http://qi-hw.com/p/openwrt-packages/b27e018 | 08:47 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ubb-vga: try to clock MSC faster than the MMC bus; new video mode "640x480/61" http://qi-hw.com/p/ben-blinkenlights/5817669 | 15:52 |
qi-bot | [commit] Werner Almesberger: ubb-vga/README: first 640x480 success with the 206NW; housekeeping http://qi-hw.com/p/ben-blinkenlights/72235b9 | 15:52 |
qi-bot | [commit] Werner Almesberger: ubb-vga.c (delay): try to compensate for APB jitter (experimental) http://qi-hw.com/p/ben-blinkenlights/01d33e2 | 15:52 |
qi-bot | [commit] Werner Almesberger: tstimc.c (tstimg): frame rate calculation didn't include the vsync pulse http://qi-hw.com/p/ben-blinkenlights/606dd63 | 02:36 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ubb-vga.c (mode_db): added 1024x768, 53 Hz mode (56 MHz pixel clock) http://qi-hw.com/p/ben-blinkenlights/aa2fc71 | 02:36 |
qi-bot | [commit] Werner Almesberger: ubb-vga: express mode data in more common units and remove hard-coded constants http://qi-hw.com/p/ben-blinkenlights/4b59dbf | 02:36 |
qi-bot | [commit] Werner Almesberger: ubb-vga: test image now shows detailed horizontal and vertical timing http://qi-hw.com/p/ben-blinkenlights/9412c9d | 02:36 |
qi-bot | [commit] Werner Almesberger: ubb-vga.c (mode_db): cleanup and added approximations of standard modes http://qi-hw.com/p/ben-blinkenlights/b184fbb | 02:36 |
qi-bot | [commit] Werner Almesberger: ubb-vga.c (list_modes, usage, main): new option -l to list available modes http://qi-hw.com/p/ben-blinkenlights/4450a30 | 02:36 |
qi-bot | [commit] Werner Almesberger: tstimg.c (tstimg): adjust size and position of parameters according to yres http://qi-hw.com/p/ben-blinkenlights/319d8a0 | 02:36 |
qi-bot | [commit] Werner Almesberger: ubb-vga/README: added to do list http://qi-hw.com/p/ben-blinkenlights/893884c | 02:37 |
qi-bot | [commit] Werner Almesberger: physmem.c: improved correctness and efficiency of alignment http://qi-hw.com/p/ben-blinkenlights/0dbf29e | 09:24 |
qi-bot | [commit] Werner Almesberger: ubb-vga: make lines end in black (and not in overscan) http://qi-hw.com/p/ben-blinkenlights/3ea6b98 | 09:24 |
qi-bot | [commit] Werner Almesberger: ubb-vga: send a line's last DMA transfer also if only partially filled http://qi-hw.com/p/ben-blinkenlights/a3cea35 | 09:24 |
qi-bot | [commit] Werner Almesberger: ubb-vga: use a free-running counter instead of resetting it for each line http://qi-hw.com/p/ben-blinkenlights/6d8c8dd | 09:24 |
qi-bot | [commit] Werner Almesberger: ubb-vga: housekeeping http://qi-hw.com/p/ben-blinkenlights/3686153 | 10:17 |
qi-bot | [commit] Werner Almesberger: ubb-vga/README: moved old content away and added new compatibility test results http://qi-hw.com/p/ben-blinkenlights/77adf43 | 23:50 |
qi-bot | [commit] Werner Almesberger: ubb-vga/README: added results for Samsung LN32R71B TV http://qi-hw.com/p/ben-blinkenlights/887012a | 23:50 |
qi-bot | [commit] David Kühling: mplayer: fix playback of Theora files width width/height not multiple of 16 http://qi-hw.com/p/openwrt-packages/9b60e67 | 11:44 |
---|---|---|
qi-bot | [commit] David Kühling: mplayer_jz47xx: upgrade to 0.1.4 which fixes various bugs http://qi-hw.com/p/openwrt-packages/e43f37c | 11:44 |
qi-bot | [commit] David Kühling: mplayer: correct last patch for size-non-multiple-of-16 theora files http://qi-hw.com/p/openwrt-packages/1217996 | 12:29 |
qi-bot | [commit] Werner Almesberger: ubb-vga.c: cleaned up setup process and prepared for DMA http://qi-hw.com/p/ben-blinkenlights/64f3047 | 15:31 |
qi-bot | [commit] Werner Almesberger: ubb-vga.c: added (fragile) DMA support (locks up on anything but 800x600) http://qi-hw.com/p/ben-blinkenlights/a8a0cfa | 15:31 |
qi-bot | [commit] Werner Almesberger: ubb-vga.c: DMA was set to transfer twice the amount needed, oops http://qi-hw.com/p/ben-blinkenlights/b273f27 | 16:28 |
qi-bot | [commit] Werner Almesberger: ubb-vga.c: moved some DMA settings from per-line to per-session setup http://qi-hw.com/p/ben-blinkenlights/9fb5c6f | 20:08 |
qi-bot | [commit] Werner Almesberger: tstimg.c: completed the alphabet http://qi-hw.com/p/ben-blinkenlights/7d16a06 | 20:08 |
qi-bot | [commit] Werner Almesberger: ubb-vga.c (struct mode, mode_db): removed no longer used field "line_words" http://qi-hw.com/p/ben-blinkenlights/90b087c | 20:08 |
qi-bot | [commit] Werner Almesberger: ubb-vga: gently prepare the code for sharing mode information http://qi-hw.com/p/ben-blinkenlights/f7eb220 | 20:08 |
qi-bot | [commit] Werner Almesberger: ubb-vga: make mode information global http://qi-hw.com/p/ben-blinkenlights/eabd0b5 | 20:08 |
qi-bot | [commit] Werner Almesberger: tstimg.c (tstimg): display timing parameters http://qi-hw.com/p/ben-blinkenlights/3007939 | 20:08 |
qi-bot | [commit] Werner Almesberger: ubb-vga: added quick and dirty run-until-keypress mode http://qi-hw.com/p/ben-blinkenlights/934a89b | 20:08 |
qi-bot | [commit] Werner Almesberger: physmem.c: added virtual to physical translation http://qi-hw.com/p/ben-blinkenlights/6cd2140 | 01:30 |
---|---|---|
qi-bot | [commit] Werner Almesberger: regs4740.h: added DMAC registers; added virt to phys translation; cleanup http://qi-hw.com/p/ben-blinkenlights/1a7b501 | 01:30 |
qi-bot | [commit] Werner Almesberger: ubb-vga.c: housekeeping http://qi-hw.com/p/ben-blinkenlights/8d803dd | 01:30 |
qi-bot | [commit] kyak: add kernel patch for setfont2 http://qi-hw.com/p/openwrt-xburst/a972bf1 | 07:42 |
qi-bot | [commit] kyak: mplayer: correctly checkout ffmpeg from git http://qi-hw.com/p/openwrt-packages/d69ac0f | 09:11 |
qi-bot | [commit] kyak: mplayer: install config from withing mplayer package http://qi-hw.com/p/openwrt-packages/773c244 | 09:21 |
qi-bot | [commit] David Kühling: mplayer: update README tips for encoding videos for NanoNote http://qi-hw.com/p/openwrt-packages/781599f | 09:54 |
qi-bot | [commit] David Kühling: mplayer: install config to /etc/mplayer/mplayer.config (renamed files/config) http://qi-hw.com/p/openwrt-packages/4ce8eb4 | 12:13 |
qi-bot | [commit] David Kühling: mplayer: fix mplayer bug for Theora frametime computation w/ emtpy packets http://qi-hw.com/p/openwrt-packages/6bfc32e | 12:14 |
qi-bot | [commit] David Kühling: mplayer: oops, have to create /etc/mplayer first http://qi-hw.com/p/openwrt-packages/ad04b8f | 12:16 |
qi-bot | [commit] David Kühling: mplayer: correct name of mplayer.conf. everything seems to work correctly now. http://qi-hw.com/p/openwrt-packages/af52b4f | 12:29 |
qi-bot | [commit] kyak: correct default keymap for handling of F11/F12 http://qi-hw.com/p/openwrt-xburst/08fadca | 19:25 |
qi-bot | [commit] kyak: ben-cyrillic: modify keymap for correct handling of F11/F12 http://qi-hw.com/p/openwrt-packages/870294b | 19:27 |
qi-bot | [commit] Werner Almesberger: ubb-vga2: new option -m to select the display mode (resolution, timing) http://qi-hw.com/p/ben-blinkenlights/71c9c7d | 01:14 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: fmit fix typo http://qi-hw.com/p/openwrt-packages/1ca9a60 | 07:58 |
qi-bot | [commit] Xiangfu Liu: nanonote-files: config.full_system, add 4th, using upstream triggerhappy http://qi-hw.com/p/openwrt-packages/7df1890 | 07:58 |
qi-bot | [commit] Xiangfu Liu: new package: move kmod-ks7010 from openwrt to here http://qi-hw.com/p/openwrt-packages/159a677 | 07:58 |
qi-bot | [commit] Xiangfu Liu: ascii-paint: using nanoote branch http://qi-hw.com/p/openwrt-packages/d895199 | 07:58 |
qi-bot | [commit] Mirko Vogt: add <http://downloads.qi-hardware.com/software/mirror-openwrt-sources/> http://qi-hw.com/p/openwrt-xburst/d3d6c3c | 09:01 |
qi-bot | [commit] Xiangfu Liu: gitignore vim temporary files (*~) http://qi-hw.com/p/openwrt-xburst/996641d | 09:01 |
qi-bot | [commit] Xiangfu Liu: optimize for ben nanonote http://qi-hw.com/p/openwrt-xburst/00b6865 | 09:01 |
qi-bot | [commit] Xiangfu Liu: [xburst] Improve mounttime http://qi-hw.com/p/openwrt-xburst/4006bc6 | 09:01 |
qi-bot | [commit] Xiangfu Liu: nanonote optimize http://qi-hw.com/p/openwrt-xburst/9454528 | 09:15 |
qi-bot | [commit] Xiangfu Liu: Add-gfortran-compiler-support-to-the-toolchain http://qi-hw.com/p/openwrt-xburst/02a7dc8 | 09:15 |
qi-bot | [commit] Werner Almesberger: ubb-vga2: non-contiguous allocation of frame buffer memory http://qi-hw.com/p/ben-blinkenlights/623f3cc | 17:08 |
qi-bot | [commit] Werner Almesberger: ubb-vga2.c (line, frame): start line timer outside the "line" function http://qi-hw.com/p/ben-blinkenlights/a63579e | 17:08 |
qi-bot | [commit] Werner Almesberger: ubb-vga2.c (main): fixed check for unknown resolution and call it "mode" http://qi-hw.com/p/ben-blinkenlights/f608e56 | 17:08 |
qi-bot | [commit] Werner Almesberger: tstimg.c (grill): avoid fencepost errors (pixel at xres/yres) http://qi-hw.com/p/ben-blinkenlights/2cee702 | 17:08 |
qi-bot | [commit] Werner Almesberger: physmem.c: align memory to word and page size http://qi-hw.com/p/ben-blinkenlights/debe9cc | 17:08 |
qi-bot | [commit] Werner Almesberger: renamed ubb-vga.c to ubb-vga-old.c, ubb-vga2.c to ubb-vga.c; updated Makefile http://qi-hw.com/p/ben-blinkenlights/3a8e062 | 17:08 |
qi-bot | [commit] Werner Almesberger: ubb-vga2.c: make frame buffer fully VGA-sized; more cleanup http://qi-hw.com/p/ben-blinkenlights/625d987 | 05:10 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ubb-vga2: move image generation out of the main program http://qi-hw.com/p/ben-blinkenlights/8643e45 | 05:10 |
qi-bot | [commit] Werner Almesberger: ubb-vga2: added test image generator (option -t) http://qi-hw.com/p/ben-blinkenlights/19f43a7 | 05:10 |
qi-bot | [commit] Werner Almesberger: ubb-vga2: added support for showing a PPM image http://qi-hw.com/p/ben-blinkenlights/080978a | 05:10 |
qi-bot | [commit] Werner Almesberger: ubb-vga/ppmimg.c (pattern): corrected the pattern for un-doubled pixels http://qi-hw.com/p/ben-blinkenlights/f0eda51 | 05:10 |
qi-bot | [commit] Werner Almesberger: ubb-vga2: replaced threshold-based color mapping with color cube model http://qi-hw.com/p/ben-blinkenlights/6558f56 | 05:10 |
qi-bot | [commit] Werner Almesberger: ubb-vga.pro: commit pcbnew preferences (from local layout experiments) http://qi-hw.com/p/ben-blinkenlights/c8f19a0 | 13:16 |
qi-bot | [commit] Werner Almesberger: ubb-vga2.c: move display resolution to #defines http://qi-hw.com/p/ben-blinkenlights/6414d92 | 13:16 |
qi-bot | [commit] Werner Almesberger: ubb-vga2.c (line, frame): don't pass prefetch pointer but just use *p http://qi-hw.com/p/ben-blinkenlights/e94b3bb | 19:50 |
qi-bot | [commit] Werner Almesberger: ubb-vga2.c: corrected and improved loading of the first TX word http://qi-hw.com/p/ben-blinkenlights/4480b32 | 19:50 |
qi-bot | [commit] Werner Almesberger: ubb-vga.sch: fixed typo in comment http://qi-hw.com/p/ben-blinkenlights/cb5a6bd | 19:50 |
qi-bot | [commit] Werner Almesberger: ubb-vga2: instead of pointers to registers, use pointer plus offset (via macros) http://qi-hw.com/p/ben-blinkenlights/957491d | 21:52 |
qi-bot | [commit] David Kühling: mplayer: upgrade to newer mplayer/ffmpeg upstream revisions, speedup tremor http://qi-hw.com/p/openwrt-packages/dd54338 | 05:20 |
---|---|---|
qi-bot | [commit] David Kühling: nanonote-files: .mplayer/config: make mplayer -quiet by default (cpu load) http://qi-hw.com/p/openwrt-packages/b4bc2ad | 05:28 |
qi-bot | [commit] David Kühling: mplayer: Make alsa work (use larger buffer), and use it instead of OSS This http://qi-hw.com/p/openwrt-packages/030251f | 06:40 |
qi-bot | [commit] David Kühling: nanonote-files: .mplayer/config: use low-accuracy, fast sample rate conversion http://qi-hw.com/p/openwrt-packages/dcf2e93 | 06:42 |
qi-bot | [commit] Werner Almesberger: ubb-vga: avoid diodes; redesign for luminance bit (Y) and MMC controller http://qi-hw.com/p/ben-blinkenlights/a794c4b | 21:33 |
qi-bot | [commit] Werner Almesberger: ubb-vga: added driver based on the MMC controller (highly experimental) http://qi-hw.com/p/ben-blinkenlights/a759723 | 21:33 |
qi-bot | [commit] Werner Almesberger: ubb-vga2.c: code cleanup and some fine-tuning http://qi-hw.com/p/ben-blinkenlights/9a455c5 | 21:33 |
qi-bot | [commit] hauke: mac80211: b43: Add Firmware 5.10.56.27 http://qi-hw.com/p/openwrt-xburst/21ca38e | 02:34 |
---|---|---|
qi-bot | [commit] hauke: mac80211: b43: Expose debug option http://qi-hw.com/p/openwrt-xburst/3c0289d | 02:34 |
qi-bot | [commit] hauke: mac80211: b43: Expose PIO mode fallback http://qi-hw.com/p/openwrt-xburst/525ee45 | 02:34 |
qi-bot | [commit] hauke: mac80211: b43: Expose N-PHY support http://qi-hw.com/p/openwrt-xburst/f3a65e7 | 02:34 |
qi-bot | [commit] nbd: busybox: fix issues with static routes and 6rd option parsing (thx, Florian Fuessl) http://qi-hw.com/p/openwrt-xburst/9649fa8 | 02:34 |
qi-bot | [commit] nbd: busybox: refresh patches http://qi-hw.com/p/openwrt-xburst/3564c67 | 02:34 |
qi-bot | [commit] jow: [package] firewall: prevent excessive uci state data aggregation (#9152) http://qi-hw.com/p/openwrt-xburst/8d0ec89 | 02:34 |
qi-bot | [commit] jow: [package] ppp: prevent duplicate hotplug for non uci managed ppp interfaces (#9275) http://qi-hw.com/p/openwrt-xburst/920b7c5 | 02:34 |
qi-bot | [commit] jow: [package] ppp: extend the r26742 change to ip-down too http://qi-hw.com/p/openwrt-xburst/2be8e60 | 02:34 |
qi-bot | [commit] nbd: mac80211: update to wireless-testing 2011-04-19, contains several beacon related fixes for ath9k http://qi-hw.com/p/openwrt-xburst/83ef4a5 | 02:34 |
qi-bot | [commit] hauke: mac80211: remove unneeded patch http://qi-hw.com/p/openwrt-xburst/e7a0967 | 02:34 |
qi-bot | [commit] acoul: linux/ar71xx: add 2.6.38 preliminary support http://qi-hw.com/p/openwrt-xburst/dfba2f5 | 02:34 |
qi-bot | [commit] acoul: linux/ar71xx: update wget2nand script http://qi-hw.com/p/openwrt-xburst/b7a26a7 | 02:34 |
qi-bot | [commit] acoul: linux/adm5120: update wget2nand script http://qi-hw.com/p/openwrt-xburst/15b4a06 | 02:34 |
qi-bot | [commit] nbd: hostapd: update to 2011-04-21 http://qi-hw.com/p/openwrt-xburst/454a4d2 | 02:34 |
qi-bot | [commit] nbd: mac80211: do rate control updates when the HT configuration changes on an interface http://qi-hw.com/p/openwrt-xburst/4e1f633 | 02:34 |
qi-bot | [commit] nbd: hostapd: fix a few compile errors and warnings http://qi-hw.com/p/openwrt-xburst/4feb070 | 02:34 |
qi-bot | [commit] nbd: cfg80211: revert upstream regdomain handling breakage http://qi-hw.com/p/openwrt-xburst/9df10a2 | 02:34 |
qi-bot | [commit] nbd: ath9k: remove the signal strength fix, it causes a lot of confusion and seems to be just as inaccurate as the original version of the code http://qi-hw.com/p/openwrt-xburst/0318dc0 | 02:34 |
qi-bot | [commit] nbd: mac80211: replace the regd revert patch with a proper fix, add some more pending patches http://qi-hw.com/p/openwrt-xburst/542d043 | 02:34 |
qi-bot | [commit] Werner Almesberger: ubb-vga.c: removed commented-out code from earlier experiments http://qi-hw.com/p/ben-blinkenlights/8bd7199 | 00:31 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ubb-vga/README: added title and compatibility list http://qi-hw.com/p/ben-blinkenlights/fb153b2 | 00:31 |
qi-bot | [commit] Werner Almesberger: ubb-vga.c: removed unused #defines and rearranged the code a little http://qi-hw.com/p/ben-blinkenlights/554c664 | 00:31 |
qi-bot | [commit] Werner Almesberger: ubb-vga.c: a bit more cleanup http://qi-hw.com/p/ben-blinkenlights/dae2169 | 00:31 |
qi-bot | [commit] Werner Almesberger: ubb-vga.c: moved line length and timing to variables http://qi-hw.com/p/ben-blinkenlights/dab839a | 00:31 |
qi-bot | [commit] Werner Almesberger: ubb-vga: option -d to double the number of set/clear pairs, improving resolution http://qi-hw.com/p/ben-blinkenlights/67107d0 | 00:31 |
qi-bot | [commit] Werner Almesberger: ubb-vga: documented single and double mode http://qi-hw.com/p/ben-blinkenlights/5df56a3 | 00:31 |
qi-bot | [commit] Werner Almesberger: renamed ubb-vga/res.fig to mapping.fig http://qi-hw.com/p/ben-blinkenlights/e1e473e | 03:07 |
qi-bot | [commit] Werner Almesberger: ubb-vga/README: "single/double mode", not "single-double mode" http://qi-hw.com/p/ben-blinkenlights/ce1c6af | 03:11 |
qi-bot | [commit] David Kühling: Disable (all?) patented codecs. Disable ffmpeg's (broken) ogg demuxer. http://qi-hw.com/p/openwrt-packages/ffb6f8b | 08:02 |
qi-bot | [commit] David Kühling: mplayer_jz47xx: upgrade to upstream version 0.1.2 that fixes some severe bugs http://qi-hw.com/p/openwrt-packages/7795ff0 | 08:08 |
qi-bot | [commit] David Kühling: nanonote-files: set mplayer config to use fullscreen hw-scaling by default http://qi-hw.com/p/openwrt-packages/dfdcbcb | 13:32 |
qi-bot | [commit] Xiangfu Liu: libtcod: using source code tags: 1.5.0 http://qi-hw.com/p/openwrt-packages/b59a47d | 14:53 |
qi-bot | [commit] David Kühling: mplayer_jz47xx: yet another upgrade with minor scaler improvements (accuracy) http://qi-hw.com/p/openwrt-packages/d6e8b1f | 16:06 |
qi-bot | [commit] David Kühling: mplayer: (increase release number) http://qi-hw.com/p/openwrt-packages/5751ee9 | 16:06 |
qi-bot | [commit] Werner Almesberger: video/video.c: pseudo-VGA output (test pattern only) http://qi-hw.com/p/ben-blinkenlights/b85ae15 | 04:33 |
---|---|---|
qi-bot | [commit] Werner Almesberger: video.c: working version, with screen grabber http://qi-hw.com/p/ben-blinkenlights/18f2957 | 04:33 |
qi-bot | [commit] Werner Almesberger: Added schematic symbol for VGA DE15 connector http://qi-hw.com/p/kicad-libs/f35d48c | 05:40 |
qi-bot | [commit] Werner Almesberger: video/: added Makefile and schematics http://qi-hw.com/p/ben-blinkenlights/7d95fe8 | 06:01 |
qi-bot | [commit] Werner Almesberger: video/README: documented sources and implementation quirks http://qi-hw.com/p/ben-blinkenlights/b11dc61 | 06:01 |
qi-bot | [commit] Werner Almesberger: renamed "video" to ubb-vga http://qi-hw.com/p/ben-blinkenlights/3b7a7ca | 06:01 |
qi-bot | [commit] David Kühling: mplayer: use svn versions of mplayer plus mplayer-internal ffmpeg from git http://qi-hw.com/p/openwrt-packages/6a975d2 | 09:07 |
qi-bot | [commit] David Kühling: mplayer_jz47xx: upgrade to latest version w/ scaler support and some fixes http://qi-hw.com/p/openwrt-packages/de21404 | 13:07 |
---|
qi-bot | [commit] Xiangfu Liu: 4th: compile fine now http://qi-hw.com/p/openwrt-packages/d938d67 | 04:59 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: ascii-paint: update to 0.3.1, compile fine now. http://qi-hw.com/p/openwrt-packages/ba3ac45 | 05:35 |
qi-bot | [commit] Xiangfu Liu: nanonote-files: restore sound configure when boot http://qi-hw.com/p/openwrt-packages/ad4e848 | 06:28 |
qi-bot | [commit] Xiangfu Liu: fmit: mark BROKEN, depends on opengl http://qi-hw.com/p/openwrt-packages/84ea804 | 03:17 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: nanonote-files: config.full_system, add liblo liblo-utils http://qi-hw.com/p/openwrt-packages/815369e | 03:47 |
qi-bot | [commit] Werner Almesberger: atrf-txrx.c (main): option parsing in PER test mode segfaulted http://qi-hw.com/p/ben-wpan/5e19655 | 04:34 |
qi-bot | [commit] Werner Almesberger: tools: new utility atrf-xmit for fast transmission tests http://qi-hw.com/p/ben-wpan/9ab94a5 | 04:34 |
qi-bot | [commit] Werner Almesberger: atrf-txrx.c (receive_message, receive_pcap): also ignore IRQ_AMI http://qi-hw.com/p/ben-wpan/16b095c | 04:34 |
qi-bot | [commit] Werner Almesberger: atrf-xmit.c (usage): the "packets" argument is optional http://qi-hw.com/p/ben-wpan/c4167d8 | 04:34 |
qi-bot | [commit] Werner Almesberger: tools/lib/atrf.c (select_driver): "default" selects the default driver http://qi-hw.com/p/ben-wpan/a15ab43 | 04:34 |
qi-bot | [commit] Werner Almesberger: tools/atrf-xtal/Makefile (clean, spotless): also clean up if target is the host http://qi-hw.com/p/ben-wpan/6eebf37 | 04:34 |
qi-bot | [commit] Werner Almesberger: tools/Makefile (upload): copy tools to /usr/bin instead of $HOME http://qi-hw.com/p/ben-wpan/d7d2bd4 | 04:34 |
qi-bot | [commit] Werner Almesberger: prod/: some elements of a production test system (in progress) http://qi-hw.com/p/ben-wpan/04db5e0 | 04:34 |
qi-bot | [commit] Xiangfu Liu: new package: libtcod for ascii-paint http://qi-hw.com/p/openwrt-packages/7ec9e95 | 13:11 |
qi-bot | [commit] Xiangfu Liu: new package: ascii-paint, uses ASCII characters instead of pixels to draw images http://qi-hw.com/p/openwrt-packages/3a40dc0 | 13:11 |
qi-bot | [commit] Werner Almesberger: prod/: on-going development http://qi-hw.com/p/ben-wpan/cd59b85 | 13:15 |
qi-bot | [commit] Werner Almesberger: libatrf: renamed driver specification argument from "arg" to "spec" http://qi-hw.com/p/ben-wpan/4fa909d | 13:15 |
qi-bot | [commit] Werner Almesberger: tools: atrf-id option -s to retrieve driver spec, with necessary infrastructure http://qi-hw.com/p/ben-wpan/2961482 | 13:15 |
qi-bot | [commit] Werner Almesberger: prod/Common: get real driver spec with atrf-id instead of assuming "default" http://qi-hw.com/p/ben-wpan/fc26eb0 | 13:15 |
qi-bot | [commit] Xiangfu Liu: add build script file using in buildhost http://qi-hw.com/p/openwrt-packages/df9db34 | 14:59 |
---|
qi-bot | [commit] Cristian Paul Peñaranda Rojas: Fake file for testing purposes http://qi-hw.com/p/ben-gps-sdr/df9f539 | 22:37 |
---|---|---|
qi-bot | [commit] Cristian Paul Peñaranda Rojas: some ugly fixes http://qi-hw.com/p/ben-gps-sdr/f35f4fc | 22:37 |
qi-bot | [commit] Werner Almesberger: atrf-path: option -P to load a min/max profile; pass/fail indication in GUI http://qi-hw.com/p/ben-wpan/a1fc867 | 00:38 |
---|---|---|
qi-bot | [commit] Werner Almesberger: atrf-path: visualize the limits in GUI mode http://qi-hw.com/p/ben-wpan/f32f48a | 00:38 |
qi-bot | [commit] Werner Almesberger: atrf-path/gui.c (main): cycle counting was broken; fixed it http://qi-hw.com/p/ben-wpan/fbc7aee | 00:38 |
qi-bot | [commit] Werner Almesberger: atrf-path: added pass/fail indication (in the GUI, accept the result with P/F) http://qi-hw.com/p/ben-wpan/c86ce30 | 00:38 |
qi-bot | [commit] Werner Almesberger: atrf-path/gui.c (tstart, tstop): commented out benchmarking code http://qi-hw.com/p/ben-wpan/9e3d174 | 00:38 |
qi-bot | [commit] Werner Almesberger: atrf-path.c (usage, main): use ... [[sweeps] samples] with and without GUI http://qi-hw.com/p/ben-wpan/87b76af | 00:38 |
qi-bot | [commit] Werner Almesberger: atrf-path/genpathprof: profile generator http://qi-hw.com/p/ben-wpan/66d641f | 00:38 |
qi-bot | [commit] Werner Almesberger: atrf-path/gui.c: indicate status not only with color but also with shape http://qi-hw.com/p/ben-wpan/07a2e5c | 00:38 |
qi-bot | [commit] Ayla: The FileLister won't list a file if a previous one has the same file name (without path). http://qi-hw.com/p/gmenu2x/6c97139 | 09:32 |
qi-bot | [commit] Ayla: Merge branch 'install_locations' of projects.qi-hardware.com:gmenu2x into install_locations http://qi-hw.com/p/gmenu2x/d0a24ac | 09:32 |
qi-bot | [commit] Ayla: Fixed the renameSection() and deleteSection() functions to use the new directories. The sections can now be renamed and deleted. http://qi-hw.com/p/gmenu2x/6cb7ce1 | 10:13 |
qi-bot | [commit] Ayla: On the skin menu, the ALTLEFT/ALTRIGHT buttons will now respectively decrease/increase the ARGB values by 10. http://qi-hw.com/p/gmenu2x/38a83dd | 17:41 |
qi-bot | [commit] Maarten ter Huurne: Added missing #include. http://qi-hw.com/p/gmenu2x/8995a3c | 01:18 |
---|---|---|
qi-bot | [commit] Maarten ter Huurne: Added missing #include. http://qi-hw.com/p/gmenu2x/34a3d55 | 01:18 |
qi-bot | [commit] Maarten ter Huurne: Merge remote branch 'origin/master' http://qi-hw.com/p/gmenu2x/f9db1fb | 01:18 |
qi-bot | [commit] Maarten ter Huurne: Cleaned up link flags. http://qi-hw.com/p/gmenu2x/23042f3 | 01:42 |
qi-bot | [commit] Maarten ter Huurne: Cleaned up link flags. http://qi-hw.com/p/gmenu2x/c22cc4d | 01:44 |
qi-bot | [commit] Werner Almesberger: atrf-path: added min/max values and corrected averaging algorithm http://qi-hw.com/p/ben-wpan/b159e00 | 01:59 |
qi-bot | [commit] Werner Almesberger: atrf-path: generalized sweep interface (for reuse) http://qi-hw.com/p/ben-wpan/6df6487 | 01:59 |
qi-bot | [commit] Werner Almesberger: - atrf-rssi.c (gui): moved system-dependent definition to gui.h http://qi-hw.com/p/ben-wpan/2967f99 | 01:59 |
qi-bot | [commit] Werner Almesberger: atrf-path: added basic graphical output http://qi-hw.com/p/ben-wpan/0a40910 | 01:59 |
qi-bot | [commit] Werner Almesberger: tools/atrf-path/gui.c: temporarily added code for sweep time measurements http://qi-hw.com/p/ben-wpan/6efe374 | 17:24 |
qi-bot | [commit] Werner Almesberger: tools/lib/cwtest.c (cw_test_end): try "quick reset" on AT86RF231 http://qi-hw.com/p/ben-wpan/4244af2 | 17:24 |
qi-bot | [commit] Werner Almesberger: tools/atrf-path/gui.c (gui): added pulsating disc as progress/status indicator http://qi-hw.com/p/ben-wpan/cee0296 | 17:24 |
qi-bot | [commit] Werner Almesberger: atrf-path: the GUI is now activated with -g; also changed arguments in GUI mode http://qi-hw.com/p/ben-wpan/436c9fa | 17:24 |
qi-bot | [commit] Werner Almesberger: atrf-path/atrf-path.c: initialize the receiver only once, not for each sweep http://qi-hw.com/p/ben-wpan/5f153ca | 17:24 |
qi-bot | [commit] Werner Almesberger: libatrf: cw test mode can now be resumed, with lower overhead (231 only) http://qi-hw.com/p/ben-wpan/16a48d6 | 17:24 |
qi-bot | [commit] Werner Almesberger: atrf-path.c: moved tx init out of sample loop (breaks 230 support) http://qi-hw.com/p/ben-wpan/e3463ef | 17:24 |
qi-bot | [commit] Werner Almesberger: atrf-path: sweep offsets separately, so that the we can reuse the cw setup http://qi-hw.com/p/ben-wpan/2c1cb71 | 17:24 |
qi-bot | [commit] Werner Almesberger: atrf-path.c (usage): list common args only once, not in each synopsis http://qi-hw.com/p/ben-wpan/d263ffc | 17:24 |
qi-bot | [commit] Werner Almesberger: atrf-path.c (do_half_sweep, do_sweep): don't duplicate the loop - use a function http://qi-hw.com/p/ben-wpan/598582c | 17:24 |
qi-bot | [commit] Werner Almesberger: atrf-path: new option -T to sweep only one offset http://qi-hw.com/p/ben-wpan/e2a9c9d | 17:24 |
qi-bot | [commit] Werner Almesberger: atrf-path.c: do cw test setup only once if sweeping a single offset http://qi-hw.com/p/ben-wpan/a7d9dfd | 17:24 |
qi-bot | [commit] Ayla: The translations can now be located on the system directory, or on the user-specific directory. http://qi-hw.com/p/gmenu2x/c18c230 | 09:34 |
---|---|---|
qi-bot | [commit] Ayla: The "configure skin" will now list all the skins present on the system and the user-specific directories. http://qi-hw.com/p/gmenu2x/f4b0310 | 09:34 |
qi-bot | [commit] Ayla: The wallpapers will now be loaded from the system and the user-specific skin directories. http://qi-hw.com/p/gmenu2x/f2b34f3 | 09:34 |
qi-bot | [commit] Ayla: The user skin directories were not created when saving the skin.conf file; Thus it was never saved. http://qi-hw.com/p/gmenu2x/12a7fe4 | 09:34 |
qi-bot | [commit] Ayla: The locale configuration will now be saved. http://qi-hw.com/p/gmenu2x/ba9fef5 | 11:30 |
qi-bot | [commit] Ayla: Merge branch 'master' into install_locations http://qi-hw.com/p/gmenu2x/f10bb60 | 11:30 |
qi-bot | [commit] Ayla: The locale configuration will now be saved. http://qi-hw.com/p/gmenu2x/ba9fef5 | 11:30 |
qi-bot | [commit] Werner Almesberger: tools/atrf-proxy/PROTOCOL: added specification of asynchronous WAIT command http://qi-hw.com/p/ben-wpan/6e0657e | 12:52 |
qi-bot | [commit] Werner Almesberger: tools/Makefile (DIRS): include atrf-proxy in builds http://qi-hw.com/p/ben-wpan/8c5d21b | 12:52 |
qi-bot | [commit] Werner Almesberger: atrf-proxy.c (loop): use SO_REUSEADDR to avoid "address already in use" http://qi-hw.com/p/ben-wpan/02b8087 | 12:52 |
qi-bot | [commit] Werner Almesberger: tools/lib/atusb.c: eliminated global variable to allow for multiple sessions http://qi-hw.com/p/ben-wpan/95c8fce | 12:52 |
qi-bot | [commit] Werner Almesberger: tools/lib/atnet.c (dialog_vsend): plugged memory leak http://qi-hw.com/p/ben-wpan/920fe34 | 12:52 |
qi-bot | [commit] Werner Almesberger: tools/lib/atnet.c: eliminated global variables to allow for multiple sessions http://qi-hw.com/p/ben-wpan/8f7e5cd | 12:52 |
qi-bot | [commit] Werner Almesberger: tools/: moved function to set transmit power from atrf-txrx to libatrf http://qi-hw.com/p/ben-wpan/8934c06 | 23:02 |
qi-bot | [commit] Werner Almesberger: libatrf: further modularized transmit power setting and exported conversion http://qi-hw.com/p/ben-wpan/1618868 | 23:02 |
qi-bot | [commit] Werner Almesberger: xxx http://qi-hw.com/p/ben-wpan/09e5d28 | 23:02 |
qi-bot | [commit] Werner Almesberger: tools: new utility atrf-path to measure path characteristics http://qi-hw.com/p/ben-wpan/a2e0e1d | 23:02 |
qi-bot | [commit] Werner Almesberger: ub: a little script that makes the kernel not touch the 8:10 card slot http://qi-hw.com/p/wernermisc/311ce9d | 23:06 |
qi-bot | [commit] Werner Almesberger: f10/Makefile (brd): funny, the "brd" target never worked http://qi-hw.com/p/wernermisc/3b04bf0 | 00:23 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: add variable for FLICKERNOISE http://qi-hw.com/p/m1s/158f7bc | 06:22 |
qi-bot | [commit] Xiangfu Liu: merge compile-rtems to compile-flickernoise http://qi-hw.com/p/m1s/50c6081 | 06:22 |
qi-bot | [commit] Xiangfu Liu: update git address http://qi-hw.com/p/m1s/5b6b261 | 06:22 |
qi-bot | [commit] Xiangfu Liu: remove autotest-m1.git, fix the wallpaper name http://qi-hw.com/p/m1s/81466a9 | 06:50 |
qi-bot | [commit] Xiangfu Liu: using cat create the flash.batch file http://qi-hw.com/p/m1s/f085a92 | 09:22 |
qi-bot | [commit] Xiangfu Liu: using mktemp for create tmp file http://qi-hw.com/p/m1s/bc7f29b | 09:30 |
qi-bot | [commit] Werner Almesberger: tools/lib/: atnet now works (tried atrf-txrx send and receive, atrf-rssi) http://qi-hw.com/p/ben-wpan/4246535 | 13:46 |
qi-bot | [commit] Xiangfu Liu: add git-update to compile-rtems, update compile-flickernoise http://qi-hw.com/p/m1s/6791e28 | 11:41 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: add test image to compile-flickernoise http://qi-hw.com/p/m1s/96e67a8 | 12:22 |
qi-bot | [commit] Xiangfu Liu: build: script for build all images for m1 http://qi-hw.com/p/m1s/8d1eecd | 12:22 |
qi-bot | [commit] Xiangfu Liu: reflash_m1.sh: reflash script for m1, reflash all http://qi-hw.com/p/m1s/b3e6c33 | 12:22 |
qi-bot | [commit] Werner Almesberger: atrf-xtal/atben.c: restructured the code for better clarity; added warnings http://qi-hw.com/p/ben-wpan/bc6bce9 | 13:06 |
qi-bot | [commit] Werner Almesberger: tools/lib/: added driver selection and driver-specific parameters to backend http://qi-hw.com/p/ben-wpan/c18d3e5 | 13:06 |
qi-bot | [commit] Werner Almesberger: atrf-reset.c: title comment claimed this was atrf-rssi http://qi-hw.com/p/ben-wpan/4e64e7a | 13:06 |
qi-bot | [commit] Werner Almesberger: tools/: API change - atrf_open now requires a string argument (can be NULL) http://qi-hw.com/p/ben-wpan/5296fc8 | 13:06 |
qi-bot | [commit] Werner Almesberger: tools/lib/: make driver name matching case-sensitive and lower-case names http://qi-hw.com/p/ben-wpan/adc14c4 | 13:06 |
qi-bot | [commit] Werner Almesberger: atrf-xtal.c (usage, main): renamed option "d" (dump) to "r" (dump raw) http://qi-hw.com/p/ben-wpan/1830454 | 13:06 |
qi-bot | [commit] Werner Almesberger: libatrf: new function atrf_default_driver_name to get the default driver name http://qi-hw.com/p/ben-wpan/54edf17 | 13:06 |
qi-bot | [commit] Werner Almesberger: tools/lib/atrf.c (select_driver): fixed name length calculation http://qi-hw.com/p/ben-wpan/1175923 | 13:06 |
qi-bot | [commit] Werner Almesberger: tools/: added option -d driver[:arg] to all tools http://qi-hw.com/p/ben-wpan/7ff1a32 | 13:06 |
qi-bot | [commit] Werner Almesberger: tools/: cleaned up the gross layering violation in atrf-xtal/atben.c http://qi-hw.com/p/ben-wpan/1a27e59 | 13:06 |
qi-bot | [commit] Werner Almesberger: tools/lib/: copied USB device opening code over from f32xbase http://qi-hw.com/p/ben-wpan/a75edf0 | 13:06 |
qi-bot | [commit] Werner Almesberger: tools/lib: atusb can now be selected by bus/device or by bus-port path http://qi-hw.com/p/ben-wpan/fc1ad9f | 13:06 |
qi-bot | [commit] Werner Almesberger: tools/: moved constant wave test mode code to libatrf (for sharing) http://qi-hw.com/p/ben-wpan/4b07e5c | 23:01 |
qi-bot | [commit] Werner Almesberger: tools/lib/: added mechanism to remove USB restrictions (enabling multiple sessions) http://qi-hw.com/p/ben-wpan/4190ade | 23:01 |
qi-bot | [commit] Werner Almesberger: tools/: two small usage fixes http://qi-hw.com/p/ben-wpan/a2f38c0 | 23:01 |
qi-bot | [commit] Werner Almesberger: tools/: added network (TCP) I/O helper functions http://qi-hw.com/p/ben-wpan/3b0ee3c | 23:01 |
qi-bot | [commit] Werner Almesberger: tools/atrf-proxy/: network proxy (untested) http://qi-hw.com/p/ben-wpan/4b57993 | 23:01 |
qi-bot | [commit] Werner Almesberger: atrf-trim.c (main): passing the trim value is not a usage error http://qi-hw.com/p/ben-wpan/1679fa2 | 23:01 |
qi-bot | [commit] Werner Almesberger: tools/lib/atrf.c: moved declaration of driver operations to driver.h http://qi-hw.com/p/ben-wpan/7fa4e97 | 23:01 |
qi-bot | [commit] Werner Almesberger: tools/lib/atrf.c: perform driver-specific operations only if using that driver http://qi-hw.com/p/ben-wpan/ccd3fd4 | 23:01 |
qi-bot | [commit] Werner Almesberger: tools/atrf-proxy/: network proxy (untested) http://qi-hw.com/p/ben-wpan/4ad0383 | 23:12 |
qi-bot | [commit] Werner Almesberger: atrf-trim.c (main): passing the trim value is not a usage error http://qi-hw.com/p/ben-wpan/0b0b571 | 23:12 |
qi-bot | [commit] Werner Almesberger: tools/lib/atrf.c: moved declaration of driver operations to driver.h http://qi-hw.com/p/ben-wpan/641567e | 23:12 |
qi-bot | [commit] Werner Almesberger: tools/lib/atrf.c: perform driver-specific operations only if using that driver http://qi-hw.com/p/ben-wpan/7be700d | 23:12 |
qi-bot | [commit] Werner Almesberger: tools/lib/: added network proxy-based driver (in progress) http://qi-hw.com/p/ben-wpan/39319e1 | 23:12 |
qi-bot | [commit] Werner Almesberger: tools/lib/atusb.c (atusb_interrupt): if we have an error, report it immediately http://qi-hw.com/p/ben-wpan/5dd2b4a | 23:12 |
qi-bot | [commit] Werner Almesberger: Merge branch 'phew' http://qi-hw.com/p/ben-wpan/803d408 | 23:12 |
qi-bot | [commit] Xiangfu Liu: remove useless config.h http://qi-hw.com/p/jzboot/c9f7c85 | 08:12 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: update libusb-1.0 LIBS CFLAGS to configure.ac http://qi-hw.com/p/xburst-tools/71d2db0 | 08:14 |
qi-bot | [commit] Xiangfu Liu: jzboot: submodule update http://qi-hw.com/p/xburst-tools/ad27abc | 08:14 |
qi-bot | [commit] Xiangfu Liu: add print version http://qi-hw.com/p/jzboot/2a49d71 | 08:40 |
qi-bot | [commit] Xiangfu Liu: jzboot. submodule update http://qi-hw.com/p/xburst-tools/c070928 | 08:47 |
qi-bot | [commit] Peter Zotov: Rename config.h to app_config.h, as old name conflicts with autoconf. http://qi-hw.com/p/jzboot/04ed523 | 10:15 |
---|---|---|
qi-bot | [commit] Peter Zotov: Use pkg-config to detect libusb-1.0. http://qi-hw.com/p/xburst-tools/fdbf94c | 10:16 |
qi-bot | [commit] Peter Zotov: Added jzboot as submodule. http://qi-hw.com/p/xburst-tools/9546fde | 12:34 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: add Makefile.am for xburst-tools autoconf http://qi-hw.com/p/jzboot/da72c35 | 13:12 |
qi-bot | [commit] Xiangfu Liu: add jzboot to build system http://qi-hw.com/p/xburst-tools/461712a | 13:15 |
qi-bot | [commit] Xiangfu Liu: those file auto created by automake system http://qi-hw.com/p/jzboot/ce7446f | 13:30 |
qi-bot | [commit] Xiangfu Liu: update jzboot http://qi-hw.com/p/xburst-tools/1eaeb7d | 13:32 |
qi-bot | [commit] Peter Zotov: Changed everything to use autotools. http://qi-hw.com/p/jzboot/8b4338f | 15:59 |
qi-bot | [commit] Peter Zotov: Adjusted configure.ac to search for libraries required for jzboot. http://qi-hw.com/p/xburst-tools/c26a0ce | 16:00 |
qi-bot | [commit] Werner Almesberger: tools/: new libatrf function atrf_slp_tr to control SLP_TR (for now only atben) http://qi-hw.com/p/ben-wpan/fe2720e | 01:54 |
---|---|---|
qi-bot | [commit] Werner Almesberger: tools/atrf-xtal: new utility to measure the crystal frequency http://qi-hw.com/p/ben-wpan/28e7f25 | 01:54 |
qi-bot | [commit] Ayla: The method FileLister::browse() now takes an optional boolean argument. http://qi-hw.com/p/gmenu2x/d820470 | 10:03 |
---|---|---|
qi-bot | [commit] Ayla: If the "sections/" directory is missing, we create it as well as some default sections (settings, applications...). http://qi-hw.com/p/gmenu2x/8336c83 | 10:03 |
qi-bot | [commit] Ayla: The sections directories shall now be found under the user-specific directory. http://qi-hw.com/p/gmenu2x/114fe59 | 10:03 |
qi-bot | [commit] Ayla: The skin images will now be loaded using SurfaceCollection::getSkinFilePath(). http://qi-hw.com/p/gmenu2x/fe25cf3 | 10:03 |
qi-bot | [commit] Ayla: Define a default wallpaper path, that will be chosen if no wallpaper is defined on the config. http://qi-hw.com/p/gmenu2x/301e16e | 10:03 |
qi-bot | [commit] David Kühling: mplayer_jz47xx: package for experimental mplayer video acceleration driver http://qi-hw.com/p/openwrt-packages/80a3d2d | 10:59 |
---|---|---|
qi-bot | [commit] David Kühling: add mplayer_jz47xx to config.full_system http://qi-hw.com/p/openwrt-packages/3eb5448 | 11:57 |
qi-bot | [commit] Werner Almesberger: atben: corrected type in RFP net name http://qi-hw.com/p/ben-wpan/84f2d27 | 22:36 |
---|
qi-bot | [commit] Werner Almesberger: atusb: enlarged USB positioning pin hole; general cleanup http://qi-hw.com/p/ben-wpan/f4342f4 | 06:40 |
---|---|---|
qi-bot | [commit] Werner Almesberger: atben: bumped PCB and fab version numbers to 110330, for consistency with atusb http://qi-hw.com/p/ben-wpan/7e51234 | 06:40 |
qi-bot | [commit] Werner Almesberger: modules/INFO: corrected island size of QFN32-VHHD-2 http://qi-hw.com/p/ben-wpan/6ae1aa6 | 10:01 |
qi-bot | [commit] Lars-Peter Clausen: MIPS: JZ4740: Convert to new irq functions http://qi-hw.com/p/qi-kernel/e7c93ce | 13:56 |
qi-bot | [commit] Lars-Peter Clausen: MIPS: JZ4740: GPIO: Use common irq chip for all gpios http://qi-hw.com/p/qi-kernel/bd61961 | 13:56 |
qi-bot | [commit] Lars-Peter Clausen: MIPS: JZ4740: Set one-shot feature flag for the clockevent http://qi-hw.com/p/qi-kernel/b0a5336 | 13:56 |
qi-bot | [commit] Werner Almesberger: install/: renamed READMEs and added (non-working) setup instructions http://qi-hw.com/p/ben-wpan/0cfd277 | 09:18 |
---|---|---|
qi-bot | [commit] Werner Almesberger: install/USAGE: rearranged to make copy & paste easier http://qi-hw.com/p/ben-wpan/d489ff8 | 09:18 |
qi-bot | [commit] Werner Almesberger: at86rf230: separate state change command from final state http://qi-hw.com/p/qi-kernel/26d4451 | 09:19 |
qi-bot | [commit] Werner Almesberger: board-qi_lb60.c: we accidently broke atben's interrupt http://qi-hw.com/p/qi-kernel/d88ff3a | 09:19 |
qi-bot | [commit] Joachim Steiger: added details about din and isolator http://qi-hw.com/p/m1/ec34f79 | 09:25 |
qi-bot | [commit] Werner Almesberger: install/USAGE: added izchat commands (yup, that works :) http://qi-hw.com/p/ben-wpan/c529753 | 09:52 |
qi-bot | [commit] Ayla: Changed an error message, that was displaying "Error:" twice. Plus, it now more meaningful. http://qi-hw.com/p/gmenu2x/ec000e0 | 13:48 |
qi-bot | [commit] Werner Almesberger: install/: kernel and system utilities build instructions (preliminary) http://qi-hw.com/p/ben-wpan/fb5bb5a | 13:01 |
---|---|---|
qi-bot | [commit] Werner Almesberger: atben/README-PCB, atusb/README-PCB: clarifications regarding holes http://qi-hw.com/p/ben-wpan/6487c32 | 13:01 |
qi-bot | [commit] Werner Almesberger: install/: updated and corrected build instructions http://qi-hw.com/p/ben-wpan/16dcc30 | 13:01 |
qi-bot | [commit] Jon Smirl: Low level changes to the IEEE 802.15.4 code http://qi-hw.com/p/qi-kernel/d830abf | 13:03 |
---|---|---|
qi-bot | [commit] Jon Smirl: 802.15.4 MAC implementation http://qi-hw.com/p/qi-kernel/4ea653f | 13:03 |
qi-bot | [commit] Jon Smirl: Implement the MAC 802.15.4 monitor interface http://qi-hw.com/p/qi-kernel/d06cf58 | 13:03 |
qi-bot | [commit] Jon Smirl: Support for Freescale SMAC http://qi-hw.com/p/qi-kernel/9d25b66 | 13:03 |
qi-bot | [commit] Jon Smirl: Implement the fake soft MAC loopback driver http://qi-hw.com/p/qi-kernel/c1b4055 | 13:03 |
qi-bot | [commit] Jon Smirl: Driver for serially attached 802.15.4 radios http://qi-hw.com/p/qi-kernel/28e0e0c | 13:03 |
qi-bot | [commit] Jon Smirl: Driver for the Atmel AT86RF230 chip http://qi-hw.com/p/qi-kernel/8165a72 | 13:03 |
qi-bot | [commit] Jon Smirl: Driver for the TI CC2420 chip http://qi-hw.com/p/qi-kernel/cc74a26 | 13:03 |
qi-bot | [commit] Jon Smirl: Driver for the Analog Device ADF7242 chip http://qi-hw.com/p/qi-kernel/87d1c2e | 13:03 |
qi-bot | [commit] Jon Smirl: Various low level board support for specific development boards http://qi-hw.com/p/qi-kernel/ed41295 | 13:03 |
qi-bot | [commit] Jon Smirl: Support for implementing a Zigbee stack in user space. http://qi-hw.com/p/qi-kernel/a2b9378 | 13:03 |
qi-bot | [commit] Werner Almesberger: ZigBee stack: fixed Kconfig-breaking typo; minor whitespace cleanup http://qi-hw.com/p/qi-kernel/a35999e | 13:03 |
qi-bot | [commit] Werner Almesberger: at86rf230: added platform-specific reset function http://qi-hw.com/p/qi-kernel/8684b7a | 13:03 |
qi-bot | [commit] Werner Almesberger: qi_lb60: experimental and ugly platform support for atben http://qi-hw.com/p/qi-kernel/1c6d725 | 13:03 |
qi-bot | [commit] Werner Almesberger: board-qi_lb60.c: fixed some atben initialization bugs http://qi-hw.com/p/qi-kernel/48976f9 | 14:41 |
qi-bot | [commit] kyak: w3m: update to 0.5.3, rework patches http://qi-hw.com/p/openwrt-packages/a349280 | 22:40 |
---|
qi-bot | [commit] Werner Almesberger: atusb.brd: updated USB-A-PLUG-SMT footprint (fped put the layers wrong) http://qi-hw.com/p/ben-wpan/74706cf | 00:23 |
---|---|---|
qi-bot | [commit] Werner Almesberger: prettygerbv: instead of changing the background, change the drill color http://qi-hw.com/p/eda-tools/ccd8301 | 00:28 |
qi-bot | [commit] werner: fped: mechanical holes had incorrect layers http://qi-hw.com/p/fped/78e4ba0 | 00:47 |
qi-bot | [commit] werner: fped: mechanical holes had incorrect layers http://qi-hw.com/p/fped/78e4ba0 | 00:53 |
qi-bot | [commit] Xiangfu Liu: add debian package stuff http://qi-hw.com/p/fped/b6807a7 | 00:53 |
qi-bot | [commit] Xiangfu Liu: clean up the Build-Depends. http://qi-hw.com/p/fped/e394af8 | 00:53 |
qi-bot | [commit] Xiangfu Liu: use the new version rules. http://qi-hw.com/p/fped/b17ed1a | 00:53 |
qi-bot | [commit] Xiangfu Liu: add debian/fped.manpages for install manpage http://qi-hw.com/p/fped/b9a6369 | 00:53 |
qi-bot | [commit] Xiangfu Liu: update to svn rev 5982, enable dh_auto_test http://qi-hw.com/p/fped/17dc8ff | 00:53 |
qi-bot | [commit] Xiangfu Liu: use usual name for orig tarball top-level directory http://qi-hw.com/p/fped/069e82f | 00:53 |
qi-bot | [commit] Xiangfu Liu: update take svn rev: 5983 http://qi-hw.com/p/fped/a6d21bb | 00:53 |
qi-bot | [commit] Xiangfu Liu: remove the Build-Depends ttf-liberation http://qi-hw.com/p/fped/21f2ae2 | 00:53 |
qi-bot | [commit] Xiangfu Liu: update to svn rev 5986 http://qi-hw.com/p/fped/5fa6038 | 00:53 |
qi-bot | [commit] Xiangfu Liu: override dh_auto_clean, use make spotless instread http://qi-hw.com/p/fped/5ac0cb5 | 00:53 |
qi-bot | [commit] Xiangfu Liu: add ghostscript to Build-Depends http://qi-hw.com/p/fped/ced96bb | 00:53 |
qi-bot | [commit] Xiangfu Liu: update the homepage to help webpage http://qi-hw.com/p/fped/4a68274 | 00:53 |
qi-bot | [commit] Xiangfu Liu: update to r5997 http://qi-hw.com/p/fped/ceaa519 | 00:53 |
qi-bot | [commit] Xiangfu Liu: debian package update to 5999 http://qi-hw.com/p/fped/a49bbd2 | 00:53 |
qi-bot | [commit] Xiangfu Liu: update to r6005 http://qi-hw.com/p/fped/acccaee | 00:53 |
qi-bot | [commit] Xiangfu Liu: update to r6006 http://qi-hw.com/p/fped/6396ca8 | 00:54 |
qi-bot | [commit] Werner Almesberger: mknnk, nnui: kernel build scripts http://qi-hw.com/p/wernermisc/3b2b916 | 23:24 |
qi-bot | [commit] nbd: mac80211: initialize the last rx time when creating a station http://qi-hw.com/p/openwrt-xburst/3ae6fa1 | 06:18 |
---|---|---|
qi-bot | [commit] cshore: [package] hotplug2: Added zaptel subsystem to /etc/hotplugs2.rules so that the zaptel kernel module package only needs to had a script to create the correct device nodes (default names differ from what all apps that use zaptel actually use, so a script is necessary). http://qi-hw.com/p/openwrt-xburst/06a1c1c | 06:18 |
qi-bot | [commit] jow: [package] ncurses: install ncurses5-config and ncursesw5-config (#9044) http://qi-hw.com/p/openwrt-xburst/f73979c | 06:18 |
qi-bot | [commit] thepeople: sysupgrade works on the wp54 http://qi-hw.com/p/openwrt-xburst/d3db86b | 06:18 |
qi-bot | [commit] jow: [tools] ipkg-utils: utilize the tar -p flag to preserve permissions (#7667) http://qi-hw.com/p/openwrt-xburst/ebdf118 | 06:18 |
qi-bot | [commit] jow: [include] image.mk: only upgrade permissions instead of overwriting, utilize tar -p flag for targz image targets (#7667) http://qi-hw.com/p/openwrt-xburst/d80e0f1 | 06:18 |
qi-bot | [commit] nbd: add support for md5sum checks for mirrored tarballs of packages with version control source urls http://qi-hw.com/p/openwrt-xburst/45e4275 | 06:18 |
qi-bot | [commit] nbd: hostapd: update to 2011-02-21, use PKG_MIRROR_MD5SUM, includes fixes for WPS http://qi-hw.com/p/openwrt-xburst/f67f195 | 06:18 |
qi-bot | [commit] nbd: ath9k: add a patch from linux-wireless@ for reducing driver size http://qi-hw.com/p/openwrt-xburst/d692939 | 06:18 |
qi-bot | [commit] kaloz: enable the 'big kernel lock' by default http://qi-hw.com/p/openwrt-xburst/5bac584 | 06:18 |
qi-bot | [commit] kaloz: [ixp4xx]: add 2.6.38 support http://qi-hw.com/p/openwrt-xburst/70a23a1 | 06:18 |
qi-bot | [commit] jow: [include] target.mk: don't enable coreutils by default, it does not even exist anymore... fixes the Image Builder http://qi-hw.com/p/openwrt-xburst/909ceae | 06:18 |
qi-bot | [commit] jow: [ar71xx] fix image generation in the Image Builder environment http://qi-hw.com/p/openwrt-xburst/9579867 | 06:18 |
qi-bot | [commit] nbd: hostapd: make entropy collection contribute to the kernel pool http://qi-hw.com/p/openwrt-xburst/2dbaa78 | 06:18 |
qi-bot | [commit] nbd: mac80211: update to wireless-testing 2011-03-22 http://qi-hw.com/p/openwrt-xburst/5034ff8 | 06:18 |
qi-bot | [commit] hcg: [omap35xx] Add patch to correct sub-page alignment http://qi-hw.com/p/openwrt-xburst/09cfea7 | 06:18 |
qi-bot | [commit] hcg: [omap35xx] kernel: add CTI usb-id's to FTDI driver http://qi-hw.com/p/openwrt-xburst/d88135f | 06:18 |
qi-bot | [commit] hcg: [omap35xx]: Correct CTI patch http://qi-hw.com/p/openwrt-xburst/4a907de | 06:18 |
qi-bot | [commit] nbd: ath9k: merge a pending patch for fixing a stopped queue issue (mostly for client mode) http://qi-hw.com/p/openwrt-xburst/f8662e2 | 06:18 |
qi-bot | [commit] nbd: ath9k: add a few de-bloating and optimization patches http://qi-hw.com/p/openwrt-xburst/b139cef | 06:18 |
qi-bot | [commit] Werner Almesberger: atben.brd, atusb.brd: set solder mask opening of fiducials to 2 mm http://qi-hw.com/p/ben-wpan/7e20be9 | 08:11 |
qi-bot | [commit] Werner Almesberger: README-PCB: relaxed antenna via size from 8 mil to <= 15 mil http://qi-hw.com/p/ben-wpan/af6d563 | 08:11 |
qi-bot | [commit] Werner Almesberger: atben. atusb: bumped version numbers to 110324 http://qi-hw.com/p/ben-wpan/f242368 | 08:11 |
qi-bot | [commit] Werner Almesberger: README-SMT: various small clarifications http://qi-hw.com/p/ben-wpan/38bea8e | 16:21 |
qi-bot | [commit] Werner Almesberger: atusb.brd: added two vias to connect front and back ground at USB shield http://qi-hw.com/p/ben-wpan/1c4c78e | 16:21 |
qi-bot | [commit] Werner Almesberger: added the front solder paste to the PCB fab package (for stencil production) http://qi-hw.com/p/ben-wpan/269f770 | 16:21 |
qi-bot | [commit] Werner Almesberger: atusb.brd: moved FIDUCAL label away from mounting hole; bumped version number http://qi-hw.com/p/ben-wpan/6ff2740 | 16:21 |
qi-bot | [commit] Werner Almesberger: fab/drl2gerber: new tool to convert an Excellon drill file to Gerber http://qi-hw.com/p/eda-tools/813ac47 | 23:11 |
qi-bot | [commit] Werner Almesberger: prettygerbv: new option -d file to show holes from a coverted drill file http://qi-hw.com/p/eda-tools/e52f0db | 23:11 |
qi-bot | [commit] Werner Almesberger: makefiles/Makefile.kicad: also show drill holes in PNG illustrations http://qi-hw.com/p/ben-wpan/0ee8b42 | 23:11 |
qi-bot | [commit] Werner Almesberger: renamed gerber/ to fab/ http://qi-hw.com/p/eda-tools/0f20739 | 00:24 |
---|---|---|
qi-bot | [commit] Werner Almesberger: bom/Makefile: added generation of an SMT fab-type BOM http://qi-hw.com/p/ben-wpan/377bbe9 | 00:24 |
qi-bot | [commit] Werner Almesberger: makefiles/Makefile.kicad: changed eda-tools/gerber/ to eda-tools/fab/ http://qi-hw.com/p/ben-wpan/ee4c70b | 00:24 |
qi-bot | [commit] Werner Almesberger: fab/pos2fab: condition a KiCAD .pos file for SMT fab use http://qi-hw.com/p/eda-tools/5cb1aed | 01:04 |
qi-bot | [commit] Werner Almesberger: Makefile.kicad: added generation of a positioning for the SMT fab http://qi-hw.com/p/ben-wpan/8885467 | 01:05 |
qi-bot | [commit] Werner Almesberger: fpdoc: new utility to generate a PDF with the footprints used in a project http://qi-hw.com/p/eda-tools/47b53c8 | 07:38 |
qi-bot | [commit] Werner Almesberger: added generation of SMT fab file package (in progress) http://qi-hw.com/p/ben-wpan/d53c2c2 | 08:03 |
qi-bot | [commit] Werner Almesberger: include overview images in PCB and SMT fab packages http://qi-hw.com/p/ben-wpan/2e53290 | 08:03 |
qi-bot | [commit] Werner Almesberger: makefiles/Makefile.kicad: fix dependency bugs http://qi-hw.com/p/ben-wpan/ef6dd28 | 08:03 |
qi-bot | [commit] Werner Almesberger: added project-specific footprint reference for SMT fab http://qi-hw.com/p/ben-wpan/507e6c3 | 08:03 |
qi-bot | [commit] Werner Almesberger: generate SMT fab package http://qi-hw.com/p/ben-wpan/2aed515 | 08:03 |
qi-bot | [commit] werner: fped: don't output pad names consisting only of spaces http://qi-hw.com/p/fped/e1f4e03 | 08:22 |
qi-bot | [commit] werner: fped: added option -1 package to select a single package to output with -p/-P http://qi-hw.com/p/fped/f44accd | 08:22 |
qi-bot | [commit] werner: hack: set errno to ENOENT when -1 fails, so that the error isn't too ugly http://qi-hw.com/p/fped/2de385e | 08:22 |
qi-bot | [commit] werner: fpd.y: dump() requires a dummy "one" argument here too, oops http://qi-hw.com/p/fped/335ddb6 | 08:30 |
qi-bot | [commit] werner: fped: don't output pad names consisting only of spaces http://qi-hw.com/p/fped/e1f4e03 | 08:35 |
qi-bot | [commit] werner: fped: added option -1 package to select a single package to output with -p/-P http://qi-hw.com/p/fped/f44accd | 08:35 |
qi-bot | [commit] werner: hack: set errno to ENOENT when -1 fails, so that the error isn't too ugly http://qi-hw.com/p/fped/2de385e | 08:35 |
qi-bot | [commit] werner: fpd.y: dump() requires a dummy "one" argument here too, oops http://qi-hw.com/p/fped/335ddb6 | 08:35 |
qi-bot | [commit] Xiangfu Liu: add debian package stuff http://qi-hw.com/p/fped/a3b3e94 | 08:35 |
qi-bot | [commit] Xiangfu Liu: clean up the Build-Depends. http://qi-hw.com/p/fped/efa4fd5 | 08:35 |
qi-bot | [commit] Xiangfu Liu: use the new version rules. http://qi-hw.com/p/fped/92b0841 | 08:35 |
qi-bot | [commit] Xiangfu Liu: add debian/fped.manpages for install manpage http://qi-hw.com/p/fped/01039f2 | 08:35 |
qi-bot | [commit] Xiangfu Liu: update to svn rev 5982, enable dh_auto_test http://qi-hw.com/p/fped/222ef26 | 08:35 |
qi-bot | [commit] Xiangfu Liu: use usual name for orig tarball top-level directory http://qi-hw.com/p/fped/f5f48c2 | 08:35 |
qi-bot | [commit] Xiangfu Liu: update take svn rev: 5983 http://qi-hw.com/p/fped/0e88d0e | 08:35 |
qi-bot | [commit] Xiangfu Liu: remove the Build-Depends ttf-liberation http://qi-hw.com/p/fped/649c47f | 08:35 |
qi-bot | [commit] Xiangfu Liu: update to svn rev 5986 http://qi-hw.com/p/fped/769d1e1 | 08:35 |
qi-bot | [commit] Xiangfu Liu: override dh_auto_clean, use make spotless instread http://qi-hw.com/p/fped/ae5b87f | 08:35 |
qi-bot | [commit] Xiangfu Liu: add ghostscript to Build-Depends http://qi-hw.com/p/fped/b639a29 | 08:35 |
qi-bot | [commit] Xiangfu Liu: update the homepage to help webpage http://qi-hw.com/p/fped/5630e97 | 08:35 |
qi-bot | [commit] Xiangfu Liu: update to r5997 http://qi-hw.com/p/fped/74852e1 | 08:35 |
qi-bot | [commit] Xiangfu Liu: debian package update to 5999 http://qi-hw.com/p/fped/4f2ca0b | 08:35 |
qi-bot | [commit] Xiangfu Liu: update to r6005 http://qi-hw.com/p/fped/3fb567b | 08:35 |
qi-bot | [commit] Werner Almesberger: modules/INFO, modules/Makefile, modules/fiducial.fpd, AUTHORS: added fiducial http://qi-hw.com/p/kicad-libs/de2174d | 15:38 |
qi-bot | [commit] Werner Almesberger: makefiles/Makefile.kicad: added target "overview" http://qi-hw.com/p/ben-wpan/b93494e | 16:13 |
qi-bot | [commit] Werner Almesberger: atben: added two fiducial marks http://qi-hw.com/p/ben-wpan/0923d24 | 16:13 |
qi-bot | [commit] Werner Almesberger: atusb/atusb.brd: some more silk screen cleanup http://qi-hw.com/p/ben-wpan/c335721 | 16:13 |
qi-bot | [commit] Werner Almesberger: atusb: added two fiducial marks http://qi-hw.com/p/ben-wpan/7a9e518 | 16:13 |
qi-bot | [commit] Werner Almesberger: fpd2pdf/fpdoc: added option -a module to manually add modules http://qi-hw.com/p/eda-tools/e92f458 | 20:47 |
qi-bot | [commit] Werner Almesberger: miscellaneous integration of fiducials http://qi-hw.com/p/ben-wpan/16ac7e5 | 20:50 |
qi-bot | [commit] Werner Almesberger: makefiles/Makefile.kicad: replaced a few $(NAME) with patterns (%, $^, $<) http://qi-hw.com/p/ben-wpan/33f320e | 21:00 |
qi-bot | [commit] Werner Almesberger: modules/stdpass.fpd: reduced silk screen width of outline from 5 to 3 mil http://qi-hw.com/p/kicad-libs/6691da1 | 05:38 |
---|---|---|
qi-bot | [commit] Werner Almesberger: hacks/brdclw: change (silk screen) line width in a component http://qi-hw.com/p/wernermisc/c481702 | 07:10 |
qi-bot | [commit] Werner Almesberger: atben.brd: enabled Drawings layer and moved measurements there http://qi-hw.com/p/ben-wpan/49f3499 | 07:10 |
qi-bot | [commit] Werner Almesberger: atben/Makefile: replace defective mlztx process with more robust cptx http://qi-hw.com/p/ben-wpan/2cade0e | 07:10 |
qi-bot | [commit] Werner Almesberger: atben/Makefile (spotless): new target to also remove KiCAD "junk" files http://qi-hw.com/p/ben-wpan/227bed1 | 07:10 |
qi-bot | [commit] Werner Almesberger: atusb/Makefile (spotless): new target to also remove KiCAD "junk" files http://qi-hw.com/p/ben-wpan/83d47a8 | 07:10 |
qi-bot | [commit] Werner Almesberger: atben/Makefile: merge comment layer (component references) into silk screen http://qi-hw.com/p/ben-wpan/528a577 | 07:10 |
qi-bot | [commit] Werner Almesberger: atusb: moved measurements to Drawings and merged Comments into silk screen http://qi-hw.com/p/ben-wpan/f17bceb | 07:10 |
qi-bot | [commit] Werner Almesberger: atben, atusb: always invoke KiCAD with absolute paths lest .pro be ignored http://qi-hw.com/p/ben-wpan/18b2b91 | 07:10 |
qi-bot | [commit] Werner Almesberger: atben, atusb: set solder mask clearance to 5 mil and adjusted silk screen http://qi-hw.com/p/ben-wpan/64a746b | 07:10 |
qi-bot | [commit] Werner Almesberger: atben.brd: shifted C2 and C4 to increase solder mask clearance http://qi-hw.com/p/ben-wpan/dfcb9fe | 07:10 |
qi-bot | [commit] Werner Almesberger: atben.brd (C1): moved component reference for more consistent appearance http://qi-hw.com/p/ben-wpan/63f44f3 | 07:10 |
qi-bot | [commit] werner: Added a new pad type: trace pads, for antennas and other trace-like elements. http://qi-hw.com/p/fped/49a1bbd | 07:16 |
qi-bot | [commit] werner: - gui.c (change_world_reselect): take into account that we may get called http://qi-hw.com/p/fped/1409cfa | 07:16 |
qi-bot | [commit] werner: Added a new pad type: trace pads, for antennas and other trace-like elements. http://qi-hw.com/p/fped/49a1bbd | 07:24 |
qi-bot | [commit] werner: - gui.c (change_world_reselect): take into account that we may get called http://qi-hw.com/p/fped/1409cfa | 07:24 |
qi-bot | [commit] Xiangfu Liu: add debian package stuff http://qi-hw.com/p/fped/312dd40 | 07:24 |
qi-bot | [commit] Xiangfu Liu: clean up the Build-Depends. http://qi-hw.com/p/fped/a0f828a | 07:24 |
qi-bot | [commit] Xiangfu Liu: use the new version rules. http://qi-hw.com/p/fped/e72f191 | 07:24 |
qi-bot | [commit] Xiangfu Liu: add debian/fped.manpages for install manpage http://qi-hw.com/p/fped/d36a0c6 | 07:24 |
qi-bot | [commit] Xiangfu Liu: update to svn rev 5982, enable dh_auto_test http://qi-hw.com/p/fped/8849850 | 07:24 |
qi-bot | [commit] Xiangfu Liu: use usual name for orig tarball top-level directory http://qi-hw.com/p/fped/0fb83ed | 07:24 |
qi-bot | [commit] Xiangfu Liu: update take svn rev: 5983 http://qi-hw.com/p/fped/2f4a8a7 | 07:24 |
qi-bot | [commit] Xiangfu Liu: remove the Build-Depends ttf-liberation http://qi-hw.com/p/fped/484c068 | 07:24 |
qi-bot | [commit] Xiangfu Liu: update to svn rev 5986 http://qi-hw.com/p/fped/8393403 | 07:24 |
qi-bot | [commit] Xiangfu Liu: override dh_auto_clean, use make spotless instread http://qi-hw.com/p/fped/5c3725d | 07:24 |
qi-bot | [commit] Xiangfu Liu: add ghostscript to Build-Depends http://qi-hw.com/p/fped/809249d | 07:24 |
qi-bot | [commit] Xiangfu Liu: update the homepage to help webpage http://qi-hw.com/p/fped/bbd9f18 | 07:24 |
qi-bot | [commit] Xiangfu Liu: update to r5997 http://qi-hw.com/p/fped/b071b68 | 07:24 |
qi-bot | [commit] Xiangfu Liu: debian package update to 5999 http://qi-hw.com/p/fped/b034b40 | 07:32 |
qi-bot | [commit] Werner Almesberger: prettygerbv: use gerbv to compose "pretty" views of a PCB http://qi-hw.com/p/eda-tools/7d249d1 | 13:13 |
qi-bot | [commit] Werner Almesberger: prettygerbv: restructured project file generation to skip missing layers http://qi-hw.com/p/eda-tools/4e5278a | 13:34 |
qi-bot | [commit] Werner Almesberger: gemerge: when complaining about a command, show what it looks like http://qi-hw.com/p/eda-tools/e95548d | 13:34 |
qi-bot | [commit] Werner Almesberger: atusb.brd: some more component reference adjustments http://qi-hw.com/p/ben-wpan/ef606f5 | 16:02 |
qi-bot | [commit] Werner Almesberger: atben.brd: further silk screen beautification http://qi-hw.com/p/ben-wpan/f297cf7 | 16:02 |
qi-bot | [commit] Werner Almesberger: atben.brd: leave ground plane in 8:10 slot uncovered; more minor cleanup http://qi-hw.com/p/ben-wpan/f46311f | 16:02 |
qi-bot | [commit] Werner Almesberger: atusb.brd: more silk screen cleanup http://qi-hw.com/p/ben-wpan/44b49fd | 16:02 |
qi-bot | [commit] Werner Almesberger: atben, atusb: updated back solder mask status (it's no longer empty) http://qi-hw.com/p/ben-wpan/f1586ff | 16:02 |
qi-bot | [commit] Werner Almesberger: atben, atusb: added Makefile targets to generate "pretty" overview images http://qi-hw.com/p/ben-wpan/0960497 | 16:02 |
qi-bot | [commit] Werner Almesberger: consolidated atben/Makefile and atusb/Makefile into common template http://qi-hw.com/p/ben-wpan/6caa0d3 | 16:02 |
qi-bot | [commit] Werner Almesberger: Makefile.recurse: moved into makefiles/ http://qi-hw.com/p/ben-wpan/7cf2b0d | 16:02 |
qi-bot | [commit] Werner Almesberger: increased solder paste deposits in QFN32-VHHD-2 and QFN32-VHHD-6 http://qi-hw.com/p/ben-wpan/3a80f06 | 16:02 |
qi-bot | [commit] Werner Almesberger: atben, atusb: added comments specifying the grid sizes http://qi-hw.com/p/ben-wpan/936d807 | 16:02 |
qi-bot | [commit] Werner Almesberger: atben: updated QFN footprint and version http://qi-hw.com/p/ben-wpan/d6c04f4 | 16:02 |
qi-bot | [commit] Werner Almesberger: atusb: updated QFN footprints and version http://qi-hw.com/p/ben-wpan/0782a3c | 16:02 |
qi-bot | [commit] Niels: Revert "first try to fix building with OpenWRT toolchain that does not include QtCore and QtGui in the include path" http://qi-hw.com/p/nanomap/f1a2430 | 23:46 |
qi-bot | [commit] Niels: Revert "second try" http://qi-hw.com/p/nanomap/69d133c | 23:46 |
qi-bot | [commit] Niels: add a .pri file for common settings in the build system http://qi-hw.com/p/nanomap/67b755c | 23:46 |
qi-bot | [commit] Niels: fix display of single poi http://qi-hw.com/p/nanomap/6c5a65b | 23:46 |
qi-bot | [commit] Niels: rename map icons http://qi-hw.com/p/nanomap/2cf2695 | 23:46 |
qi-bot | [commit] Niels: add download of poi to download widget http://qi-hw.com/p/nanomap/d7480d3 | 23:46 |
qi-bot | [commit] Niels: load file with crtl+o http://qi-hw.com/p/nanomap/a9d6810 | 23:46 |
qi-bot | [commit] Niels: a bit more consistant ui http://qi-hw.com/p/nanomap/88bbfbe | 23:46 |
qi-bot | [commit] Niels: remove unused funktion triggerAction() from layers http://qi-hw.com/p/nanomap/8d77601 | 23:46 |
qi-bot | [commit] Niels: add not (yet) working downloader for routing data http://qi-hw.com/p/nanomap/f86e246 | 23:46 |
qi-bot | [commit] Niels: show file name instead of generic Point of Interest title in layer menu http://qi-hw.com/p/nanomap/6bdf7c5 | 23:46 |
qi-bot | [commit] Niels: replace combobox with listwidget to select the poi type http://qi-hw.com/p/nanomap/3110a49 | 23:46 |
qi-bot | [commit] Niels: beautify drawing of battery level a bit http://qi-hw.com/p/nanomap/a3d3597 | 23:46 |
qi-bot | [commit] Niels: draw poi name if it is near the middle of the screen http://qi-hw.com/p/nanomap/880bc8b | 23:46 |
qi-bot | [commit] kyak: snownews: enable wide ncurses support http://qi-hw.com/p/openwrt-packages/0a344e8 | 17:36 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: Revert "flite: include in upstream" http://qi-hw.com/p/openwrt-packages/345e073 | 17:55 |
qi-bot | [commit] Xiangfu Liu: flite: add depends alsa-lib by kyak http://qi-hw.com/p/openwrt-packages/0101325 | 17:58 |
qi-bot | [commit] Lars-Peter Clausen: RTC: Add support for the JZ4760 SoC to the rtc-jz4740 driver http://qi-hw.com/p/qi-kernel/afcc6b4 | 15:53 |
---|---|---|
qi-bot | [commit] Lars-Peter Clausen: JZ47XX: Fix JZ4760 access to vmalloc'ed memory http://qi-hw.com/p/qi-kernel/0183861 | 15:53 |
qi-bot | [commit] Lars-Peter Clausen: JZ47XX: Add GPIO ports for JZ4760 and some JZ4760 pin defintions http://qi-hw.com/p/qi-kernel/ae4e7f0 | 15:53 |
qi-bot | [commit] Lars-Peter Clausen: JZ47XX: Add PWM support for JZ4760 http://qi-hw.com/p/qi-kernel/f399709 | 15:53 |
qi-bot | [commit] Lars-Peter Clausen: MIPS: JZ47XX: Further generalize clock support http://qi-hw.com/p/qi-kernel/c1e9dbc | 15:53 |
qi-bot | [commit] Lars-Peter Clausen: FBDEV: JZ4740: Add basic jz4760 support http://qi-hw.com/p/qi-kernel/2f1f65e | 15:53 |
qi-bot | [commit] Lars-Peter Clausen: MMC: Make the JZ4740 driver availabe on JZ4760 http://qi-hw.com/p/qi-kernel/305091d | 15:53 |
qi-bot | [commit] Lars-Peter Clausen: MIPS: JZ4760: Add more platform device defintions http://qi-hw.com/p/qi-kernel/f7ff3ac | 15:53 |
qi-bot | [commit] Lars-Peter Clausen: MIPS: JZ4740: Fix NR_IRQS http://qi-hw.com/p/qi-kernel/ec99009 | 15:53 |
qi-bot | [commit] Lars-Peter Clausen: MIPS: JZ4760: Fix NR_IRQS http://qi-hw.com/p/qi-kernel/22e8c09 | 15:53 |
qi-bot | [commit] Lars-Peter Clausen: MIPS: JZ4760: lepus: Register more peripherals http://qi-hw.com/p/qi-kernel/d85e1af | 15:53 |
qi-bot | [commit] Lars-Peter Clausen: MIPS: JZ4750: xz0032: Fix gpio-charger platform data http://qi-hw.com/p/qi-kernel/b3f02bb | 15:53 |
qi-bot | [commit] Lars-Peter Clausen: MMC: JZ4740: Drop clock_id field from platform data http://qi-hw.com/p/qi-kernel/f61158c | 15:53 |
qi-bot | [commit] Lars-Peter Clausen: MIPS: JZ4740: Fix pwm http://qi-hw.com/p/qi-kernel/6b01526 | 15:53 |
qi-bot | [commit] Werner Almesberger: BOOKSHELF.ingenic: partially resurrected for it's merely in the twilight http://qi-hw.com/p/wernermisc/3d61f78 | 15:58 |
qi-bot | [commit] kyak: config.full_system: restore options as of openwrt-xburst http://qi-hw.com/p/openwrt-packages/bdc44cb | 07:46 |
---|
qi-bot | [commit] kyak: qstardict: fix build with 0.9.32 http://qi-hw.com/p/openwrt-packages/90818e8 | 11:40 |
---|---|---|
qi-bot | [commit] Werner Almesberger: BOOKSHELF.ingenic: removed for Ingenic prefer to leave developers in the dark http://qi-hw.com/p/wernermisc/88e0f82 | 14:35 |
qi-bot | [commit] Werner Almesberger: atben/atusb: added -pcb to PCB fab archives; added "upload" target http://qi-hw.com/p/ben-wpan/fffa6e9 | 00:36 |
---|---|---|
qi-bot | [commit] Werner Almesberger: atben.brd: specified which components to place (for SMT fab) http://qi-hw.com/p/ben-wpan/57e59c0 | 00:36 |
qi-bot | [commit] Werner Almesberger: atben, atusb: added polarity markers http://qi-hw.com/p/ben-wpan/970695c | 00:36 |
qi-bot | [commit] Werner Almesberger: atusb.brd: specified which components to place (for SMT fab) http://qi-hw.com/p/ben-wpan/c06ed9e | 00:36 |
qi-bot | [commit] Werner Almesberger: atusb.brd (B1): moved component reference which overlapped with circle http://qi-hw.com/p/ben-wpan/34d236c | 00:36 |
qi-bot | [commit] Werner Almesberger: atben.brd (B1): moved component reference which overlapped with circle http://qi-hw.com/p/ben-wpan/0e93120 | 00:36 |
qi-bot | [commit] Werner Almesberger: atben: use mlztx to copy the version number to the silk screen http://qi-hw.com/p/ben-wpan/bdfed80 | 00:36 |
qi-bot | [commit] Werner Almesberger: atben: set origin for fab files to lower left corner of board http://qi-hw.com/p/ben-wpan/073675a | 00:36 |
qi-bot | [commit] Werner Almesberger: atusb: use cptx to copy the version number to the silk screen http://qi-hw.com/p/ben-wpan/695f6c2 | 00:36 |
qi-bot | [commit] Werner Almesberger: atben: set origin for fab files to lower left corner of board http://qi-hw.com/p/ben-wpan/6b3a049 | 00:36 |
qi-bot | [commit] Werner Almesberger: atben/README-PCB, atusb/README-PCB: various minor clarifications http://qi-hw.com/p/ben-wpan/eac6e3c | 00:36 |
qi-bot | [commit] Werner Almesberger: atben.brd: changed version from 110219 to 110314 http://qi-hw.com/p/ben-wpan/44bd936 | 00:47 |
qi-bot | [commit] Werner Almesberger: atusb.brd: changed version from 110314 to 110314 http://qi-hw.com/p/ben-wpan/1cb69d1 | 00:47 |
qi-bot | [commit] Werner Almesberger: gerber/gmerge: new utility to merge multiple KiCAD Gerbers into one http://qi-hw.com/p/eda-tools/5187819 | 04:13 |
qi-bot | [commit] kyak: package libmpc http://qi-hw.com/p/openwrt-packages/bf897ad | 10:11 |
qi-bot | [commit] Xiangfu Liu: [new packages] jdkdrum Command Line Drum Synth Program For Linux http://qi-hw.com/p/openwrt-packages/06fa0f3 | 06:22 |
---|---|---|
qi-bot | [commit] Werner Almesberger: mlztx/mlztx: new utility to copy text in KiCAD board files to multiple layers http://qi-hw.com/p/eda-tools/f8f8a75 | 06:26 |
qi-bot | [commit] Xiangfu Liu: add compile rtems makefile http://qi-hw.com/p/m1s/f8456a4 | 07:00 |
qi-bot | [commit] Xiangfu Liu: update compile flickernoise, add more depends http://qi-hw.com/p/m1s/48c1faa | 07:00 |
qi-bot | [commit] Xiangfu Liu: add README http://qi-hw.com/p/m1s/6d1cf65 | 07:15 |
qi-bot | [commit] Xiangfu Liu: add prepare, split configure rtems and compile rtems http://qi-hw.com/p/m1s/c992a0b | 07:16 |
qi-bot | [commit] Xiangfu Liu: add README http://qi-hw.com/p/m1s/0f674d3 | 07:16 |
qi-bot | [commit] Xiangfu Liu: [new package] smalltalk free implementation of the Smalltalk-80 language http://qi-hw.com/p/openwrt-packages/65a509c | 14:16 |
qi-bot | [commit] Xiangfu Liu: fix typo http://qi-hw.com/p/m1s/4cbc8fd | 14:22 |
qi-bot | [commit] Werner Almesberger: kicad-patches: command-line selection of aux origin; support aux in DXF, too http://qi-hw.com/p/eda-tools/984a6de | 15:19 |
qi-bot | [commit] Werner Almesberger: mlztx/cptx: new utility for KiCAD board files to copy content across text fields http://qi-hw.com/p/eda-tools/e6f05a0 | 16:21 |
qi-bot | [commit] kyak: mpfr: update to 3.0.0 http://qi-hw.com/p/openwrt-packages/ea53255 | 19:32 |
qi-bot | [commit] Werner Almesberger: kicad-patches/exclude-pcb-edge.patch:: added option -e / --exclude-pcb-edge http://qi-hw.com/p/eda-tools/46dbda6 | 00:56 |
---|---|---|
qi-bot | [commit] Werner Almesberger: atben/Makefile: generate proper Gerbers (without edge) http://qi-hw.com/p/ben-wpan/e0d8271 | 01:00 |
qi-bot | [commit] Werner Almesberger: atben/README-PCB: mention that the back solder mask is empty http://qi-hw.com/p/ben-wpan/20717b2 | 01:00 |
qi-bot | [commit] Werner Almesberger: atben/Makefile: cleanup and a small bug fix http://qi-hw.com/p/ben-wpan/6bbe3bf | 02:52 |
qi-bot | [commit] Werner Almesberger: atusb: added fab file generation, like in atben http://qi-hw.com/p/ben-wpan/cdf3825 | 02:52 |
qi-bot | [commit] Xiangfu Liu: mupdf compile fine now. remove useless fonts and cmaps, not test yet http://qi-hw.com/p/UNNAMED PROJECT/acd1023 | 03:55 |
qi-bot | [commit] Xiangfu Liu: a simple work version http://qi-hw.com/p/m1s/239193d | 06:03 |
qi-bot | [commit] Wolfgang Spraul: merged Werner's patch, fixed eeschema background color bug http://qi-hw.com/p/eda-tools/a074fa1 | 07:29 |
qi-bot | [commit] Werner Almesberger: atben/Makefile (gen): corrected use of --plot (for style - not really used) http://qi-hw.com/p/ben-wpan/7ef1c09 | 07:47 |
qi-bot | [commit] kyak: catch up with alsa-lib from openwrt feeds, fix versionsort http://qi-hw.com/p/openwrt-packages/67a7082 | 18:37 |
qi-bot | [commit] Werner Almesberger: atben/Makefile: added generation of some fab files (in progress) http://qi-hw.com/p/ben-wpan/74ed5d8 | 08:28 |
---|---|---|
qi-bot | [commit] Werner Almesberger: atben/README-PCB: added manufacturing specification/instructions (in progress) http://qi-hw.com/p/ben-wpan/021ccde | 08:28 |
qi-bot | [commit] Werner Almesberger: atusb/fw/Makefile: clean up handing of boot loader base address http://qi-hw.com/p/ben-wpan/edfb8a9 | 08:28 |
qi-bot | [commit] Werner Almesberger: atusb/fw/Makefile (prog): corrected boot loader size in hfuse http://qi-hw.com/p/ben-wpan/e29046d | 08:28 |
qi-bot | [commit] Werner Almesberger: atusb/fw/Makefile: added auxiliary Flash programming target (for development) http://qi-hw.com/p/ben-wpan/f87bdce | 08:28 |
qi-bot | [commit] Werner Almesberger: atusb/fw/flash.c: implemented flash_can_write and flash_read (were stubs) http://qi-hw.com/p/ben-wpan/553c981 | 08:28 |
qi-bot | [commit] Werner Almesberger: atusb/fw/flash.c: simplified logic of flash_write and corrected several small bugs http://qi-hw.com/p/ben-wpan/2978afe | 08:28 |
qi-bot | [commit] Werner Almesberger: atusb/fw: introduced function flash_end_write to properly finish flashing http://qi-hw.com/p/ben-wpan/c265151 | 08:28 |
qi-bot | [commit] Werner Almesberger: atusb/fw/usb/atu2.c (handle_ep): cancel RX/TX if we receive a SETUP http://qi-hw.com/p/ben-wpan/e5571a2 | 08:28 |
qi-bot | [commit] Werner Almesberger: atusb/fw: implemented USB bus reset (to host) and polling of reset from host http://qi-hw.com/p/ben-wpan/d233c04 | 08:28 |
qi-bot | [commit] Xiangfu Liu: [avrdude] auto-download patches by werner, not re-generate them again http://qi-hw.com/p/openwrt-packages/9532a35 | 06:48 |
---|---|---|
qi-bot | [commit] kyak: add nanonote-base/data/-files to config_full http://qi-hw.com/p/openwrt-packages/b3fb1dc | 08:00 |
qi-bot | [commit] Xiangfu Liu: disable CONFIG_ALL, add Tile and gottet http://qi-hw.com/p/openwrt-xburst/4202dc5 | 07:00 |
---|---|---|
qi-bot | [commit] kyak: config.full_system: add supertux, terminus-font http://qi-hw.com/p/openwrt-xburst/e5d5c44 | 07:00 |
qi-bot | [commit] kyak: config.full_system: build gcc-mips, make, binutils as modules. Remove http://qi-hw.com/p/openwrt-xburst/2561764 | 07:00 |
qi-bot | [commit] kyak: config.full_system: remove "=m" packages http://qi-hw.com/p/openwrt-xburst/72266f2 | 07:00 |
qi-bot | [commit] kyak: don't include ghostscript and fbgs into rootfs, build as modules http://qi-hw.com/p/openwrt-xburst/98e2046 | 07:00 |
qi-bot | [commit] David Kühling: config.full_system: fix name of gnuplot package (was renamed a long time ago) http://qi-hw.com/p/openwrt-xburst/86be5ac | 07:00 |
qi-bot | [commit] Xiangfu Liu: add zgv, MPlayer, brainless http://qi-hw.com/p/openwrt-xburst/d1b141a | 07:00 |
qi-bot | [commit] Xiangfu Liu: remove custum banner, focus on 100% upstream, http://qi-hw.com/p/openwrt-xburst/cfa528f | 07:00 |
qi-bot | [commit] kyak: config.full_system: add setterm http://qi-hw.com/p/openwrt-xburst/fe70e9c | 07:00 |
qi-bot | [commit] kyak: config.full_system: include GNU tar http://qi-hw.com/p/openwrt-xburst/a821111 | 07:00 |
qi-bot | [commit] Lars-Peter Clausen: [package] ks7010: Remove debug printks http://qi-hw.com/p/openwrt-xburst/da9332b | 07:00 |
qi-bot | [commit] Lars-Peter Clausen: [xburst] jz_mmc: Drop warning about spares irqs. http://qi-hw.com/p/openwrt-xburst/669ebc7 | 07:00 |
qi-bot | [commit] Lars-Peter Clausen: [xburst] Improve mounttime. http://qi-hw.com/p/openwrt-xburst/03298f1 | 07:00 |
qi-bot | [commit] kyak: have sound modules built in kernel http://qi-hw.com/p/openwrt-xburst/b7e305d | 07:00 |
qi-bot | [commit] Xiangfu Liu: reflash_ben.sh, new option b k r, reboot device after reflash http://qi-hw.com/p/openwrt-xburst/b0b471f | 07:00 |
qi-bot | [commit] kyak: add sound options to default config, so that it won't popup http://qi-hw.com/p/openwrt-xburst/9c1f8ec | 07:00 |
qi-bot | [commit] Xiangfu Liu: config.full_system: add openssh-sftp-server http://qi-hw.com/p/openwrt-xburst/53228b5 | 07:00 |
qi-bot | [commit] Xiangfu Liu: update opkg.conf, don't using /tmp keep packages information http://qi-hw.com/p/openwrt-xburst/5144826 | 07:00 |
qi-bot | [commit] kyak: config.full_system: busybox enhancements http://qi-hw.com/p/openwrt-xburst/7b32b8b | 07:00 |
qi-bot | [commit] kyak: config.full_system: more busybox options http://qi-hw.com/p/openwrt-xburst/b4dc884 | 07:00 |
qi-bot | [commit] Xiangfu Liu: move data/ folder from openwrt-xburst http://qi-hw.com/p/openwrt-packages/b36c84b | 10:09 |
qi-bot | [commit] Xiangfu Liu: new package: nanonote-data-files http://qi-hw.com/p/openwrt-packages/47618a2 | 10:09 |
qi-bot | [commit] Xiangfu Liu: move those files to openwrt-package.git http://qi-hw.com/p/openwrt-xburst/3b6e325 | 10:11 |
qi-bot | [commit] Werner Almesberger: avrdude/patches/nanonote.patch: oops, clock math was old, slightly broken version http://qi-hw.com/p/ben-blinkenlights/ea5b8af | 00:27 |
---|---|---|
qi-bot | [commit] Werner Almesberger: avrdude/patches/: added skipping of untouched bytes in write/verify http://qi-hw.com/p/ben-blinkenlights/d7874e3 | 04:55 |
qi-bot | [commit] Werner Almesberger: atusb/fw/usb/: corrected type of user-provided descriptor http://qi-hw.com/p/ben-wpan/0293911 | 05:05 |
qi-bot | [commit] Werner Almesberger: atusb/fw/: moved USB IDs from descr.c to board.h http://qi-hw.com/p/ben-wpan/79b5daf | 05:05 |
qi-bot | [commit] Werner Almesberger: usb/fw/atusb.c (main): removed 100 ms LED flash http://qi-hw.com/p/ben-wpan/0676bef | 05:05 |
qi-bot | [commit] Werner Almesberger: usb/: added DFU implementation from f386base/fw/boot/ (unported) http://qi-hw.com/p/ben-wpan/fb2204a | 05:05 |
qi-bot | [commit] Werner Almesberger: atusb/fw/usb/: adapted DFU engine to current stack and abstracted Flash ops http://qi-hw.com/p/ben-wpan/f91738c | 05:05 |
qi-bot | [commit] Werner Almesberger: atusb/fw/: flash a boot loader instead of the application (in progress) http://qi-hw.com/p/ben-wpan/e8bed1f | 05:05 |
qi-bot | [commit] Werner Almesberger: atusb/fw/Makefile (clean): also remove the boot loader http://qi-hw.com/p/ben-wpan/341b348 | 05:05 |
qi-bot | [commit] Werner Almesberger: atusb/fw/README: avr-libc 1.17.1 has been released http://qi-hw.com/p/ben-wpan/6ac82fc | 05:05 |
qi-bot | [commit] Werner Almesberger: atusb/fw/Makefile: put -mmcu into CFLAGS so that DEPEND uses it, too http://qi-hw.com/p/ben-wpan/1dcc833 | 05:05 |
qi-bot | [commit] Werner Almesberger: atusb/fw/flash.c: added basic writing support (untested) http://qi-hw.com/p/ben-wpan/b8fc1a7 | 05:05 |
qi-bot | [commit] Werner Almesberger: atusb/fw/Makefile: lock fuse refuses 0xef; set it to 0x2f to pass verification http://qi-hw.com/p/ben-wpan/b5fd6e3 | 06:15 |
qi-bot | [commit] Werner Almesberger: avrdude/: fixed confusing typo in avrdude.conf, added tuxbrain's nanonote_ICSP http://qi-hw.com/p/ben-blinkenlights/6ef2b39 | 20:36 |
qi-bot | [commit] kyak: xburst-tools buffered output patch http://qi-hw.com/p/xburst-tools/a3a38ca | 03:12 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: disable CONFIG_ALL, add Tile and gottet http://qi-hw.com/p/openwrt-xburst/4c23f2d | 06:15 |
qi-bot | [commit] kyak: config.full_system: add supertux, terminus-font http://qi-hw.com/p/openwrt-xburst/4c6dfc5 | 06:15 |
qi-bot | [commit] kyak: config.full_system: build gcc-mips, make, binutils as modules. Remove http://qi-hw.com/p/openwrt-xburst/3916e5f | 06:15 |
qi-bot | [commit] kyak: config.full_system: remove "=m" packages http://qi-hw.com/p/openwrt-xburst/f2bfc5a | 06:15 |
qi-bot | [commit] kyak: don't include ghostscript and fbgs into rootfs, build as modules http://qi-hw.com/p/openwrt-xburst/38ae85f | 06:15 |
qi-bot | [commit] David Kühling: config.full_system: fix name of gnuplot package (was renamed a long time ago) http://qi-hw.com/p/openwrt-xburst/c014532 | 06:15 |
qi-bot | [commit] Xiangfu Liu: add zgv, MPlayer, brainless http://qi-hw.com/p/openwrt-xburst/76010c7 | 06:15 |
qi-bot | [commit] Xiangfu Liu: remove custum banner, focus on 100% upstream, http://qi-hw.com/p/openwrt-xburst/09a0a62 | 06:15 |
qi-bot | [commit] kyak: config.full_system: add setterm http://qi-hw.com/p/openwrt-xburst/2cb0ceb | 06:15 |
qi-bot | [commit] kyak: config.full_system: include GNU tar http://qi-hw.com/p/openwrt-xburst/56c68f9 | 06:15 |
qi-bot | [commit] Lars-Peter Clausen: [package] ks7010: Remove debug printks http://qi-hw.com/p/openwrt-xburst/4cd6a3c | 06:15 |
qi-bot | [commit] Lars-Peter Clausen: [xburst] jz_mmc: Drop warning about spares irqs. http://qi-hw.com/p/openwrt-xburst/0f173bc | 06:15 |
qi-bot | [commit] Lars-Peter Clausen: [xburst] Improve mounttime. http://qi-hw.com/p/openwrt-xburst/1526555 | 06:15 |
qi-bot | [commit] kyak: have sound modules built in kernel http://qi-hw.com/p/openwrt-xburst/5db429d | 06:15 |
qi-bot | [commit] Xiangfu Liu: reflash_ben.sh, new option b k r, reboot device after reflash http://qi-hw.com/p/openwrt-xburst/40ce746 | 06:15 |
qi-bot | [commit] kyak: add sound options to default config, so that it won't popup http://qi-hw.com/p/openwrt-xburst/f3b0c9b | 06:15 |
qi-bot | [commit] Xiangfu Liu: config.full_system: add openssh-sftp-server http://qi-hw.com/p/openwrt-xburst/190d239 | 06:15 |
qi-bot | [commit] Xiangfu Liu: update opkg.conf, don't using /tmp keep packages information http://qi-hw.com/p/openwrt-xburst/ea1bf4f | 06:15 |
qi-bot | [commit] kyak: config.full_system: busybox enhancements http://qi-hw.com/p/openwrt-xburst/495b903 | 06:15 |
qi-bot | [commit] kyak: config.full_system: more busybox options http://qi-hw.com/p/openwrt-xburst/b2bc487 | 06:15 |
qi-bot | [commit] kyak: cxxtools: updated to 2.0, fix build issues http://qi-hw.com/p/openwrt-packages/cc7557c | 13:38 |
qi-bot | [commit] kyak: jbofihe: fix build http://qi-hw.com/p/openwrt-packages/c04a579 | 14:46 |
qi-bot | [commit] kyak: libgii: fix build http://qi-hw.com/p/openwrt-packages/dcc4ef7 | 15:02 |
qi-bot | [commit] kyak: tntnet: update to 2.0, fix build http://qi-hw.com/p/openwrt-packages/55b2647 | 16:44 |
qi-bot | [commit] Xiangfu Liu: add reset help http://qi-hw.com/p/xburst-tools/9b840cd | 03:14 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: remove duplicate code http://qi-hw.com/p/xburst-tools/7597779 | 03:14 |
qi-bot | [commit] Jo-Philipp Wich: The cxxtools static library is not built anymore after autoreconf, do not attempt to package it http://qi-hw.com/p/openwrt-packages/61c62b6 | 03:56 |
qi-bot | [commit] Jo-Philipp Wich: Rely on standard autoreconf facility, remove manual autoreconf all, define prereq on host guile http://qi-hw.com/p/openwrt-packages/b14002b | 03:56 |
qi-bot | [commit] Xiangfu Liu: [mtd.nn] using /bin/sh http://qi-hw.com/p/openwrt-packages/b914455 | 03:56 |
qi-bot | [commit] Werner Almesberger: usrp/sps/20110306: examine sidebands ("spikes") and try to reduce them http://qi-hw.com/p/ben-wpan/a60fb1e | 07:54 |
qi-bot | [commit] kyak: jfbterm: fix build http://qi-hw.com/p/openwrt-packages/97ed0cb | 12:41 |
qi-bot | [commit] Xiangfu Liu: config.full_system: add openssh-sftp-server http://qi-hw.com/p/openwrt-xburst/99830f7 | 15:01 |
qi-bot | [commit] Xiangfu Liu: update opkg.conf, don't using /tmp keep packages information http://qi-hw.com/p/openwrt-xburst/ca51346 | 15:01 |
qi-bot | [commit] kyak: gcc-mips: fix build http://qi-hw.com/p/openwrt-packages/a0b91c6 | 16:08 |
qi-bot | [commit] Werner Almesberger: BOOKSHELF.ingenic: Jz4720/Jz4740/Jz4760 manuals http://qi-hw.com/p/wernermisc/68e84b3 | 17:31 |
qi-bot | [commit] kyak: config.full_system: busybox enhancements http://qi-hw.com/p/openwrt-xburst/c3cafbf | 18:54 |
qi-bot | [commit] kyak: config.full_system: more busybox options http://qi-hw.com/p/openwrt-xburst/d6a32b5 | 19:18 |
qi-bot | [commit] Werner Almesberger: usb/cam/Makefile: added dependency in Makefile itself; local parameter update http://qi-hw.com/p/ben-blinkenlights/a05155e | 20:25 |
qi-bot | [commit] Werner Almesberger: uart/avrdude: renamed to ./avrdude (i.e., moved to the top-level) http://qi-hw.com/p/ben-blinkenlights/271a50f | 20:25 |
qi-bot | [commit] Werner Almesberger: uart/: great renaming to nxuart, including references in Makefile http://qi-hw.com/p/ben-blinkenlights/5b14b50 | 20:25 |
qi-bot | [commit] Werner Almesberger: nxuart/: changed title in nxuart.sch and nxuart.brd http://qi-hw.com/p/ben-blinkenlights/4fa0a34 | 20:25 |
qi-bot | [commit] Werner Almesberger: avrdude/patches: renamed "uart" to "nxuart" http://qi-hw.com/p/ben-blinkenlights/de826dd | 20:25 |
qi-bot | [commit] Werner Almesberger: nxuart/fw/: renamed "uart" to "nxuart" as well http://qi-hw.com/p/ben-blinkenlights/fc32459 | 20:25 |
qi-bot | [commit] Werner Almesberger: avrdude/patches/nanonote.patch: added clock output with -x clk=#MHz http://qi-hw.com/p/ben-blinkenlights/0c2b982 | 20:25 |
qi-bot | [commit] Werner Almesberger: nxuart/fw/Makefile (prog): supply an 8 MHz clock while programming http://qi-hw.com/p/ben-blinkenlights/a8c10a0 | 20:25 |
qi-bot | [commit] David Kühling: gforth: fix build problem introduced by new openwrt autoconf support http://qi-hw.com/p/openwrt-packages/51b2d6d | 20:59 |
qi-bot | [commit] David Kühling: libgii: remove libtool/host dependency http://qi-hw.com/p/openwrt-packages/a5e3b85 | 22:57 |
qi-bot | [commit] David Kühling: gnuplot-gfx: libtool and other fixes to make it compile again http://qi-hw.com/p/openwrt-packages/5751eb1 | 22:57 |
qi-bot | [commit] Xiangfu Liu: update package revision to 25513, xfce: using nls.mk http://qi-hw.com/p/openwrt-xburst/8dbb669 | 07:19 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: config.full_system disable some demo and examples http://qi-hw.com/p/openwrt-xburst/88c5d49 | 07:19 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst, add ubifs support http://qi-hw.com/p/openwrt-xburst/3b49a05 | 07:19 |
qi-bot | [commit] Lars-Peter Clausen: Restore sdio fix for the spectec wlan card http://qi-hw.com/p/openwrt-xburst/ce33cfd | 07:19 |
qi-bot | [commit] Xiangfu Liu: disable CONFIG_ALL, add Tile and gottet http://qi-hw.com/p/openwrt-xburst/1c65278 | 07:19 |
qi-bot | [commit] kyak: config.full_system: add supertux, terminus-font http://qi-hw.com/p/openwrt-xburst/7497bd3 | 07:19 |
qi-bot | [commit] kyak: config.full_system: build gcc-mips, make, binutils as modules. Remove http://qi-hw.com/p/openwrt-xburst/636ce1a | 07:19 |
qi-bot | [commit] kyak: config.full_system: remove "=m" packages http://qi-hw.com/p/openwrt-xburst/a6cf3ff | 07:19 |
qi-bot | [commit] kyak: don't include ghostscript and fbgs into rootfs, build as modules http://qi-hw.com/p/openwrt-xburst/d2893bf | 07:19 |
qi-bot | [commit] David Kühling: config.full_system: fix name of gnuplot package (was renamed a long time ago) http://qi-hw.com/p/openwrt-xburst/e206b99 | 07:19 |
qi-bot | [commit] Xiangfu Liu: add zgv, MPlayer, brainless http://qi-hw.com/p/openwrt-xburst/74e06ac | 07:19 |
qi-bot | [commit] Xiangfu Liu: remove custum banner, focus on 100% upstream, http://qi-hw.com/p/openwrt-xburst/4e15154 | 07:19 |
qi-bot | [commit] kyak: config.full_system: add setterm http://qi-hw.com/p/openwrt-xburst/c6edd1a | 07:19 |
qi-bot | [commit] kyak: config.full_system: include GNU tar http://qi-hw.com/p/openwrt-xburst/8d348cd | 07:19 |
qi-bot | [commit] Lars-Peter Clausen: [package] ks7010: Remove debug printks http://qi-hw.com/p/openwrt-xburst/390578e | 07:19 |
qi-bot | [commit] Lars-Peter Clausen: [xburst] jz_mmc: Drop warning about spares irqs. http://qi-hw.com/p/openwrt-xburst/4dd2799 | 07:19 |
qi-bot | [commit] Lars-Peter Clausen: [xburst] Improve mounttime. http://qi-hw.com/p/openwrt-xburst/169e661 | 07:19 |
qi-bot | [commit] kyak: have sound modules built in kernel http://qi-hw.com/p/openwrt-xburst/1a8f935 | 07:19 |
qi-bot | [commit] Xiangfu Liu: reflash_ben.sh, new option b k r, reboot device after reflash http://qi-hw.com/p/openwrt-xburst/bb07d26 | 07:19 |
qi-bot | [commit] kyak: add sound options to default config, so that it won't popup http://qi-hw.com/p/openwrt-xburst/9af7e98 | 07:19 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: Reorganizing some dump util location http://qi-hw.com/p/ben-gps-sdr/10126aa | 15:23 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: New bit2bloatbyte util, so now data can be off-line processed as 16bi tI/Q http://qi-hw.com/p/ben-gps-sdr/ac28678 | 15:23 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: .gitignore tune and more repo cleanup http://qi-hw.com/p/ben-gps-sdr/594ab63 | 15:34 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: Some comments and explanations about bit2bloat tool added to notes http://qi-hw.com/p/ben-gps-sdr/857135a | 15:34 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: Added comments for easy code reading http://qi-hw.com/p/ben-gps-sdr/21c8dd4 | 15:34 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: Reorganizing some dump util location http://qi-hw.com/p/ben-gps-sdr/10126aa | 15:37 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: New bit2bloatbyte util, so now data can be off-line processed as 16bi tI/Q http://qi-hw.com/p/ben-gps-sdr/ac28678 | 15:37 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: .gitignore tune and more repo cleanup http://qi-hw.com/p/ben-gps-sdr/594ab63 | 15:37 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: Some comments and explanations about bit2bloat tool added to notes http://qi-hw.com/p/ben-gps-sdr/857135a | 15:37 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: Added comments for easy code reading http://qi-hw.com/p/ben-gps-sdr/21c8dd4 | 15:37 |
qi-bot | [commit] Werner Almesberger: usrp/sps/: use PATH instead of hard-coding relative paths in invocations http://qi-hw.com/p/ben-wpan/cb3e80f | 20:43 |
qi-bot | [commit] Werner Almesberger: usrp/sps/Makefile: moved to 20110303 and adapted PATH http://qi-hw.com/p/ben-wpan/9100fdf | 20:43 |
qi-bot | [commit] Werner Almesberger: usrp/fft.c: added Hamming, make dump easier to interpret http://qi-hw.com/p/ben-wpan/fff1e1e | 00:59 |
---|---|---|
qi-bot | [commit] Werner Almesberger: usrp/fft.c: made window function user-selectable, added hann, blackman, rect http://qi-hw.com/p/ben-wpan/95a9e12 | 00:59 |
qi-bot | [commit] Werner Almesberger: usrp/fft.c: added support for averaging of FFT results before dumping http://qi-hw.com/p/ben-wpan/c98b916 | 00:59 |
qi-bot | [commit] Werner Almesberger: usrp/fft.c (do_fft): don't output the sample number when dumping http://qi-hw.com/p/ben-wpan/b90e3e2 | 00:59 |
qi-bot | [commit] Werner Almesberger: tools/Makefile.common: offer LDLIBS_$(TARGET) twice (hack - needs more study) http://qi-hw.com/p/ben-wpan/9552b9f | 00:59 |
qi-bot | [commit] Werner Almesberger: tools/atrf-txrx (DEFAULT_TRIM, usage, main): changed default trim from 0 to 8 http://qi-hw.com/p/ben-wpan/da89623 | 00:59 |
qi-bot | [commit] Werner Almesberger: usrp/sps/: spectrum scan utilities (work in progress) http://qi-hw.com/p/ben-wpan/fd27bdc | 00:59 |
qi-bot | [commit] Werner Almesberger: usrp/sps: further improved scripts, added Makefile http://qi-hw.com/p/ben-wpan/7258e10 | 00:59 |
qi-bot | [commit] Werner Almesberger: atusb/fw/Makefile: abstract host so that one can use HOST=ben instead of jlime http://qi-hw.com/p/ben-wpan/2f85fa9 | 00:59 |
qi-bot | [commit] Werner Almesberger: atusb/fw/atusb.c (main): enabled blinking the LED for the prototypes http://qi-hw.com/p/ben-wpan/4759ea6 | 00:59 |
qi-bot | [commit] David Kühling: mplayer: enable vidix driver subsystem; try to dynamically load jz47xx_vid.so http://qi-hw.com/p/openwrt-packages/9450286 | 12:36 |
qi-bot | [commit] David Kühling: mplayer: fix silly crash bug with -vo cvidix (when jz47xx_drv.so present). http://qi-hw.com/p/openwrt-packages/81b4266 | 14:06 |
qi-bot | [commit] kyak: add sound options to default config, so that it won't popup http://qi-hw.com/p/openwrt-xburst/04a194b | 15:38 |
qi-bot | [commit] Xiangfu Liu: avrdue: compile fine now http://qi-hw.com/p/openwrt-packages/61c7a8e | 02:35 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: avrdude: apply qi_lb60-patches when build for nanonote http://qi-hw.com/p/openwrt-packages/bd34549 | 02:35 |
qi-bot | [commit] Xiangfu Liu: kbd: install more keymaps http://qi-hw.com/p/openwrt-packages/a1df6bb | 03:26 |
qi-bot | [commit] Lars-Peter Clausen: allow variable timer irq and timer id http://qi-hw.com/p/qi-kernel/d8312a1 | 12:21 |
qi-bot | [commit] Peter Zotov: MIPS: JZ47xx: Fix a few naming issues. http://qi-hw.com/p/qi-kernel/fad288a | 12:21 |
qi-bot | [commit] Peter Zotov: MIPS: JZ47xx: Moved jz4740 headers to a subdirectory of mach-jz47xx/. http://qi-hw.com/p/qi-kernel/ac7a6e4 | 12:21 |
qi-bot | [commit] Lars-Peter Clausen: Split time.c into timer-cevt.c and timer-csrc.c http://qi-hw.com/p/qi-kernel/87c1d85 | 12:21 |
qi-bot | [commit] Lars-Peter Clausen: Generalize gpio support http://qi-hw.com/p/qi-kernel/1a111cf | 12:21 |
qi-bot | [commit] Lars-Peter Clausen: Move 2nd level IRQ defintions to sub-arch specific files. http://qi-hw.com/p/qi-kernel/b57516e | 12:24 |
qi-bot | [commit] Lars-Peter Clausen: Don't make any assumptions about which timers are used as sytem timers http://qi-hw.com/p/qi-kernel/d9ee7e9 | 17:34 |
qi-bot | [commit] Lars-Peter Clausen: GPIO: Replace leftover JZ47XX_IRQ_GPIO(0) with jz_gpio_irq_base http://qi-hw.com/p/qi-kernel/1bbb2ee | 17:34 |
qi-bot | [commit] Lars-Peter Clausen: Add support for more then one irq bank and move initialization into sub-archs. http://qi-hw.com/p/qi-kernel/7437e22 | 17:34 |
qi-bot | [commit] Lars-Peter Clausen: Add very basic jz4760 support http://qi-hw.com/p/qi-kernel/1768b00 | 17:34 |
qi-bot | [commit] Peter Zotov: MIPS: Add basic JZ4750 support. http://qi-hw.com/p/qi-kernel/b9dc8f8 | 19:35 |
qi-bot | [commit] Peter Zotov: MIPS: JZ4750: Add workarounds for CP0 STATUS. http://qi-hw.com/p/qi-kernel/2308d11 | 19:35 |
qi-bot | [commit] kyak: gmenu2x: update to latest git http://qi-hw.com/p/openwrt-packages/5b28efc | 21:23 |
qi-bot | [commit] Lars-Peter Clausen: Use common base address file for all sub-archs http://qi-hw.com/p/qi-kernel/6ab3c06 | 23:21 |
qi-bot | [commit] Lars-Peter Clausen: Add OST support http://qi-hw.com/p/qi-kernel/2c4cbdb | 23:21 |
qi-bot | [commit] Lars-Peter Clausen: Use common base address file for all sub-archs http://qi-hw.com/p/qi-kernel/6871d07 | 23:37 |
qi-bot | [commit] Lars-Peter Clausen: Add OST support http://qi-hw.com/p/qi-kernel/184d491 | 23:37 |
qi-bot | [commit] Werner Almesberger: sal/: primitive USRP2-based spectrum analyzer http://qi-hw.com/p/wernermisc/e6f62bc | 00:08 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: update usbboot version http://qi-hw.com/p/xburst-tools/86d8824 | 07:23 |
qi-bot | [commit] Xiangfu Liu: update changelog, INSTALL http://qi-hw.com/p/xburst-tools/8170afb | 07:23 |
qi-bot | [commit] Xiangfu Liu: update debian changelog http://qi-hw.com/p/xburst-tools/51b7b51 | 07:23 |
qi-bot | [commit] Xiangfu Liu: new package: avrdude, for programming Atmel AVR Microcontrollers http://qi-hw.com/p/openwrt-packages/27512b3 | 09:09 |
qi-bot | [commit] Xiangfu Liu: avrdude add patch for nanonote from werner http://qi-hw.com/p/openwrt-packages/c5dd13f | 09:46 |
qi-bot | [commit] Xiangfu Liu: nanonote-files: add kernel-6x11-font http://qi-hw.com/p/openwrt-packages/5fee023 | 00:55 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: cleanup code style, cleanup command process function http://qi-hw.com/p/xburst-tools/702b54a | 02:45 |
qi-bot | [commit] Xiangfu Liu: increate cmd buf size, some code style cleanup http://qi-hw.com/p/xburst-tools/f685003 | 02:45 |
qi-bot | [commit] Xiangfu Liu: add JZ4760 EVB Lepus config file http://qi-hw.com/p/xburst-tools/aa59c6a | 02:45 |
qi-bot | [commit] Xiangfu Liu: add new command: reset, then we can reboot device after reflash http://qi-hw.com/p/xburst-tools/ff3182d | 02:45 |
qi-bot | [commit] Xiangfu Liu: update Changelog http://qi-hw.com/p/xburst-tools/b3ebec3 | 02:53 |
qi-bot | [commit] Xiangfu Liu: reflash_ben.sh, new option b k r, reboot device after reflash http://qi-hw.com/p/openwrt-xburst/a8f5b61 | 03:49 |
qi-bot | [commit] David Kühling: plplot: minor cleanup (suggestions from kyak) http://qi-hw.com/p/openwrt-packages/29868ea | 23:04 |
---|
qi-bot | [commit] Werner Almesberger: atusb-pgm: changed LED color; cleanup of silk screen http://qi-hw.com/p/ben-wpan/22f7eee | 05:33 |
---|---|---|
qi-bot | [commit] kyak: kexecboot: initial port http://qi-hw.com/p/openwrt-packages/cf28aa3 | 11:23 |
qi-bot | [commit] Xiangfu Liu: new package curveship: Interactive fiction + interactive narrating http://qi-hw.com/p/openwrt-packages/5c15906 | 13:57 |
qi-bot | [commit] David Kühling: gforth: patch from jow to adapt to build-system changes http://qi-hw.com/p/openwrt-packages/8591705 | 22:33 |
qi-bot | [commit] David Kühling: emacs: patch by jow to adapt to build-system changes http://qi-hw.com/p/openwrt-packages/d1d5fe4 | 22:33 |
qi-bot | [commit] David Kühling: octave: patch by jow to adapt to build-system changes http://qi-hw.com/p/openwrt-packages/bd72697 | 22:33 |
qi-bot | [commit] David Kühling: plplot: patch by jow to adapt to build-system changes http://qi-hw.com/p/openwrt-packages/5e9064e | 22:33 |
qi-bot | [commit] David Kühling: libggi: patch by jow to adapt to build-system changes http://qi-hw.com/p/openwrt-packages/3c62d2b | 22:33 |
qi-bot | [commit] Werner Almesberger: uart/avrdude/README: updated build instructions and added OpenWRT http://qi-hw.com/p/ben-blinkenlights/3d3bf15 | 12:12 |
---|---|---|
qi-bot | [commit] kyak: override alsa-lib (untie the kmod-sound-core dependency) http://qi-hw.com/p/openwrt-packages/89c3ff8 | 15:00 |
qi-bot | [commit] kyak: have sound modules built in kernel http://qi-hw.com/p/openwrt-xburst/f747f0d | 15:00 |
qi-bot | [commit] Lars-Peter Clausen: [package] ks7010: Remove debug printks http://qi-hw.com/p/openwrt-xburst/e231a31 | 09:46 |
---|---|---|
qi-bot | [commit] Lars-Peter Clausen: [xburst] jz_mmc: Drop warning about spares irqs. http://qi-hw.com/p/openwrt-xburst/e86a9a0 | 09:46 |
qi-bot | [commit] David Kühling: emacs: force it to not use gpm and libasound http://qi-hw.com/p/openwrt-packages/b091aa6 | 12:35 |
qi-bot | [commit] David Kühling: emacs: fix load-history problem by disabling gpm-mouse-mode by default http://qi-hw.com/p/openwrt-packages/bf91beb | 12:35 |
qi-bot | [commit] David Kühling: emacs: another patch necessary to disable gpm-mouse-mode http://qi-hw.com/p/openwrt-packages/e162113 | 12:41 |
qi-bot | [commit] kyak: libnsfb and tic-tac-toe: fix missing dependencies http://qi-hw.com/p/openwrt-packages/861d3a2 | 16:00 |
qi-bot | [commit] Lars-Peter Clausen: [xburst] Improve mounttime. http://qi-hw.com/p/openwrt-xburst/630a786 | 17:45 |
qi-bot | [commit] kyak: generate fontconfig cache from uci-defaults http://qi-hw.com/p/openwrt-packages/bb20bc3 | 21:20 |
qi-bot | [commit] kyak: moc: various changes http://qi-hw.com/p/openwrt-packages/51e26e3 | 06:02 |
---|---|---|
qi-bot | [commit] kyak: moc: rearrange dependencies http://qi-hw.com/p/openwrt-packages/2dc7838 | 07:53 |
qi-bot | [commit] kyak: moc depends on libsamplerate http://qi-hw.com/p/openwrt-packages/17dd26b | 10:58 |
qi-bot | [commit] kyak: mpg123 and libmpg123 initial port http://qi-hw.com/p/openwrt-packages/bdfc6c1 | 13:22 |
qi-bot | [commit] kyak: gmu: build support for mp3 (if BUILD_PATENTED is set) http://qi-hw.com/p/openwrt-packages/8f5504b | 13:22 |
qi-bot | [commit] kyak: config.full_system: include GNU tar http://qi-hw.com/p/openwrt-xburst/7c6146a | 16:48 |
qi-bot | [commit] kyak: w3m: build-in image support (not without ugly hacks) http://qi-hw.com/p/openwrt-packages/2b645dd | 19:44 |
qi-bot | [commit] kyak: abook: works fine at 53x20 minimum http://qi-hw.com/p/openwrt-packages/463c20c | 20:30 |
qi-bot | [commit] kyak: kinyin: resize open/save dialog to 320x240 http://qi-hw.com/p/openwrt-packages/e50bd7f | 21:42 |
qi-bot | [commit] Xiangfu Liu: new package: Easy Tic-Tac-Toe game http://qi-hw.com/p/openwrt-packages/a0b6f78 | 09:03 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: new package: Easy Tic-Tac-Toe game http://qi-hw.com/p/openwrt-packages/7af1552 | 09:05 |
qi-bot | [commit] Xiangfu Liu: byobu, fix touch path http://qi-hw.com/p/gmenu2x/0807b1b | 01:56 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: mv pyclock to applications section http://qi-hw.com/p/gmenu2x/f5820b6 | 01:56 |
qi-bot | [commit] Xiangfu Liu: new icon: qstardict http://qi-hw.com/p/gmenu2x/ffa28ac | 02:43 |
qi-bot | [commit] Xiangfu Liu: stardict dictionary, add English <-> Spanish http://qi-hw.com/p/openwrt-packages/217bb4e | 03:09 |
qi-bot | [commit] Xiangfu Liu: gmenu2x, update, new icons added in gmenu2x http://qi-hw.com/p/openwrt-packages/eff293a | 05:54 |
qi-bot | [commit] kyak: add icon for qstardict http://qi-hw.com/p/gmenu2x/8cc1b02 | 09:24 |
qi-bot | [commit] kyak: config.full_system: add setterm http://qi-hw.com/p/openwrt-xburst/a0cb487 | 09:24 |
qi-bot | [commit] kyak: add tclsh icon http://qi-hw.com/p/gmenu2x/bbda0d9 | 09:40 |
qi-bot | [commit] kyak: gcc-mips: don't install libs already installed by system http://qi-hw.com/p/openwrt-packages/de15212 | 09:44 |
qi-bot | [commit] kyak: kinyin: don't show mouse and adapt to Ben's screen http://qi-hw.com/p/openwrt-packages/9e435a2 | 12:28 |
qi-bot | [commit] kyak: gcc-mips: don't install libs already installed by system http://qi-hw.com/p/openwrt-packages/af2c616 | 12:34 |
qi-bot | [commit] kyak: wqy: install a symlink so that qt sees that font http://qi-hw.com/p/openwrt-packages/7e4225e | 17:49 |
qi-bot | [commit] Werner Almesberger: Updates CAM processes of various sub-projects http://qi-hw.com/p/ben-wpan/125055b | 02:44 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: add zgv, MPlayer, brainless http://qi-hw.com/p/openwrt-xburst/f521ceb | 03:23 |
qi-bot | [commit] Werner Almesberger: atusb-sil/: moved C8051F326-related material out of atusb/ http://qi-hw.com/p/ben-wpan/2642b9e | 03:27 |
qi-bot | [commit] Werner Almesberger: moved atusb/fw3/ to atusb/fw/ http://qi-hw.com/p/ben-wpan/78cfc8f | 03:27 |
qi-bot | [commit] Werner Almesberger: atusb/fw/Makefile (CFLAGS): simplify -I../fw/include to -Iinclude http://qi-hw.com/p/ben-wpan/313fb7c | 03:27 |
qi-bot | [commit] Xiangfu Liu: create pango.modules when system first boot http://qi-hw.com/p/openwrt-packages/a7d0746 | 03:28 |
qi-bot | [commit] Xiangfu Liu: update nanonote-files version http://qi-hw.com/p/openwrt-packages/78ccf86 | 03:31 |
qi-bot | [commit] Xiangfu Liu: touch utmp for byobu, add -b ~/ ~/ to mc params http://qi-hw.com/p/gmenu2x/3ab2a4f | 04:17 |
qi-bot | [commit] Xiangfu Liu: remove custum banner, focus on 100% upstream, http://qi-hw.com/p/openwrt-xburst/0031274 | 04:42 |
qi-bot | [commit] kyak: freedroid: add icon http://qi-hw.com/p/gmenu2x/b218991 | 17:38 |
qi-bot | [commit] kyak: update apps to profit from the latest changes in qt4 http://qi-hw.com/p/openwrt-packages/598a81d | 17:38 |
qi-bot | [commit] kyak: kinyin: it builds now http://qi-hw.com/p/openwrt-packages/6ae0610 | 17:38 |
qi-bot | [commit] kyak: w3m: add PKG_RELEASE http://qi-hw.com/p/openwrt-packages/c19e786 | 17:38 |
qi-bot | [commit] Xiangfu Liu: add -q to freedroid http://qi-hw.com/p/gmenu2x/8190004 | 16:13 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: add hnb icon, add snownews icon http://qi-hw.com/p/gmenu2x/30cd9fd | 16:13 |
qi-bot | [commit] Xiangfu Liu: screen, add icon http://qi-hw.com/p/gmenu2x/e9c58f5 | 16:21 |
qi-bot | [commit] Xiangfu Liu: byobu, add /var/run/utmp http://qi-hw.com/p/openwrt-packages/a25d555 | 16:24 |
qi-bot | [commit] Xiangfu Liu: gmenu2x, update http://qi-hw.com/p/openwrt-packages/4ba1f50 | 16:37 |
qi-bot | [commit] Xiangfu Liu: Revert "byobu, add /var/run/utmp" http://qi-hw.com/p/openwrt-packages/d7b53ed | 16:44 |
qi-bot | [commit] David Kühling: gnuplot: explicitely disable all unneeded features to fix build problems http://qi-hw.com/p/openwrt-packages/520487b | 21:18 |
qi-bot | [commit] David Kühling: config.full_system: fix name of gnuplot package (was renamed a long time ago) http://qi-hw.com/p/openwrt-xburst/c25b5fb | 21:19 |
qi-bot | [commit] David Kühling: gmenu2x: make console the foreground console before launching applications http://qi-hw.com/p/gmenu2x/5300921 | 22:56 |
qi-bot | [commit] kyak: MPlayer: add missing dependencies http://qi-hw.com/p/openwrt-packages/8598739 | 09:55 |
---|---|---|
qi-bot | [commit] Werner Almesberger: atben.brd: increased board size by 0.1 mm on each side and relaxed layout http://qi-hw.com/p/ben-wpan/640195e | 16:33 |
qi-bot | [commit] Werner Almesberger: atben: reduced ridiculously long AVDD trace and cleaned up the area http://qi-hw.com/p/ben-wpan/771926f | 16:33 |
qi-bot | [commit] Werner Almesberger: atben: more layout cleanup; improved CLKM test point http://qi-hw.com/p/ben-wpan/3c51458 | 16:33 |
qi-bot | [commit] Werner Almesberger: atben: further crystal and RF ground cleanup http://qi-hw.com/p/ben-wpan/1a790af | 16:33 |
qi-bot | [commit] Werner Almesberger: atben.brd: small cosmetic layout corrections http://qi-hw.com/p/ben-wpan/21f62a7 | 16:33 |
qi-bot | [commit] Werner Almesberger: atben/Makefile: added targets for generating and reviewing Gerbers http://qi-hw.com/p/ben-wpan/208f972 | 16:33 |
qi-bot | [commit] Werner Almesberger: atben.brd: cleanup for visualization http://qi-hw.com/p/ben-wpan/394bf3a | 16:33 |
qi-bot | [commit] kyak: w3m: fix build with config.full_system http://qi-hw.com/p/openwrt-packages/880c971 | 06:32 |
---|---|---|
qi-bot | [commit] kyak: NanoMap: update to the latest git http://qi-hw.com/p/openwrt-packages/f3588d8 | 07:42 |
qi-bot | [commit] kyak: NanoMap: install monav libs http://qi-hw.com/p/openwrt-packages/193f1d3 | 08:41 |
qi-bot | [commit] Werner Almesberger: atben.brd: layout cleanup; removed de facto contacts between ground zones http://qi-hw.com/p/ben-wpan/f7f8eb2 | 12:56 |
qi-bot | [commit] Werner Almesberger: atusb/fw3/README: build instructions for firmware and prerequisites http://qi-hw.com/p/ben-wpan/c3ac7d9 | 12:56 |
qi-bot | [commit] kyak: don't include ghostscript and fbgs into rootfs, build as modules http://qi-hw.com/p/openwrt-xburst/8200c93 | 09:35 |
---|
qi-bot | [commit] Xiangfu Liu: disable CONFIG_ALL, add Tile and gottet http://qi-hw.com/p/openwrt-xburst/5a344fe | 03:16 |
---|---|---|
qi-bot | [commit] kyak: supertux: fix some levels using salcon.mod instead of SALCON.MOD http://qi-hw.com/p/openwrt-packages/9cf9d67 | 06:20 |
qi-bot | [commit] kyak: config.full_system: add supertux, terminus-font http://qi-hw.com/p/openwrt-xburst/846efe8 | 06:27 |
qi-bot | [commit] kyak: config.full_system: build gcc-mips, make, binutils as modules. Remove http://qi-hw.com/p/openwrt-xburst/d18c108 | 06:27 |
qi-bot | [commit] kyak: config.full_system: remove "=m" packages http://qi-hw.com/p/openwrt-xburst/40a69aa | 06:49 |
qi-bot | [commit] Werner Almesberger: atusb.brd: moved some component refernces to improve visual appearance http://qi-hw.com/p/ben-wpan/81818ca | 02:34 |
---|---|---|
qi-bot | [commit] Werner Almesberger: bom: added the ATmega32U2 http://qi-hw.com/p/ben-wpan/68b2627 | 02:50 |
qi-bot | [commit] Werner Almesberger: nanonote.patch: cleanup and properly power down on exit (also turns off LED) http://qi-hw.com/p/ben-blinkenlights/0c56f05 | 03:39 |
qi-bot | [commit] Werner Almesberger: cameo: allow comma between parameters of "drill" (makes use in scripts easier) http://qi-hw.com/p/cae-tools/0826d5b | 05:09 |
qi-bot | [commit] Werner Almesberger: cameo/templates/mkmk-simple: template for milling simple boards http://qi-hw.com/p/cae-tools/b0eb017 | 05:09 |
qi-bot | [commit] Werner Almesberger: mkmk-simple: oops, should be executable http://qi-hw.com/p/cae-tools/4ae218c | 05:13 |
qi-bot | [commit] Werner Almesberger: ubb/cam/Makefile: use mkmk-simple http://qi-hw.com/p/ben-blinkenlights/daa6331 | 07:23 |
qi-bot | [commit] Xiangfu Liu: add recently new package icons http://qi-hw.com/p/gmenu2x/bb826e0 | 08:16 |
qi-bot | [commit] Xiangfu Liu: update-F4-loading-kernel-from-ubifs_rootfs-bin-uImag http://qi-hw.com/p/openwrt-packages/a0ee309 | 08:17 |
qi-bot | [commit] Xiangfu Liu: gmenu2x, offrss, nethack small fix, update http://qi-hw.com/p/openwrt-packages/0ec093b | 08:17 |
qi-bot | [commit] kyak: backgammon won't fail miserably on small terminals http://qi-hw.com/p/openwrt-packages/7495f45 | 10:46 |
qi-bot | [commit] Xiangfu Liu: work around for gforth http://qi-hw.com/p/openwrt-packages/504dfdc | 15:10 |
qi-bot | [commit] Xiangfu Liu: increase the data partition size to 1480MB http://qi-hw.com/p/openwrt-packages/ebafec9 | 15:10 |
qi-bot | [commit] David Kühling: gforth: add missing libffi dependency http://qi-hw.com/p/openwrt-packages/cee4a8d | 21:44 |
qi-bot | [commit] David Kühling: plplot: disable detection of pango for now, since that can break compilation http://qi-hw.com/p/openwrt-packages/9ab42d3 | 21:44 |
qi-bot | [commit] David Kühling: gforth: bump version number (this version already distributed via release?) http://qi-hw.com/p/openwrt-packages/5f81a8d | 21:44 |
qi-bot | [commit] David Kühling: use gforth.png icon for gforth http://qi-hw.com/p/gmenu2x/bd8ee72 | 22:06 |
qi-bot | [commit] David Kühling: add launcher for Octave http://qi-hw.com/p/gmenu2x/f1c4bd8 | 22:06 |
qi-bot | [commit] David Kühling: add octave icon http://qi-hw.com/p/gmenu2x/58eae74 | 22:15 |
qi-bot | [commit] Werner Almesberger: atusb-pgm/cam/Makefile: use mkmk-simple http://qi-hw.com/p/ben-wpan/1106196 | 22:20 |
qi-bot | [commit] Werner Almesberger: atben: rotated the CPU for much tighter layout; removed C9 http://qi-hw.com/p/ben-wpan/c75274f | 22:20 |
qi-bot | [commit] Lars-Peter Clausen: Restore sdio fix for the spectec wlan card http://qi-hw.com/p/openwrt-xburst/fdcac17 | 01:33 |
---|---|---|
qi-bot | [commit] Werner Almesberger: atusb/fw3/an/: USB debugging scripts http://qi-hw.com/p/ben-wpan/f4d299d | 02:02 |
qi-bot | [commit] Werner Almesberger: atusb/fw3/: adaptation of the f32xbase USB stack http://qi-hw.com/p/ben-wpan/da6677b | 02:49 |
qi-bot | [commit] Werner Almesberger: atusb: slightly adjusted some component values for easier sourcing http://qi-hw.com/p/ben-wpan/138a1be | 05:15 |
qi-bot | [commit] Werner Almesberger: atusb.brd: update and silk screen cleanup http://qi-hw.com/p/ben-wpan/fa99266 | 05:15 |
qi-bot | [commit] Adam Wang: High speed bug fixed by Yanjun Luo: http://qi-hw.com/p/m1/f24e496 | 09:22 |
qi-bot | [commit] kyak: supertux: don't install backup images http://qi-hw.com/p/openwrt-packages/d89a29e | 09:52 |
qi-bot | [commit] kyak: terminus-font: initial port http://qi-hw.com/p/openwrt-packages/a14421b | 11:46 |
qi-bot | [commit] kyak: gmenu2x: updated to the latest git http://qi-hw.com/p/openwrt-packages/717ed87 | 14:36 |
qi-bot | [commit] kyak: gmenu2x: add supertux launcher http://qi-hw.com/p/gmenu2x/6dc9b3f | 14:37 |
qi-bot | [commit] Werner Almesberger: atusb/fw3: renamed usb2/ to usb/ in move away from FreakUSB http://qi-hw.com/p/ben-wpan/57b908d | 15:06 |
qi-bot | [commit] Werner Almesberger: atusb/fw3/: tighten compiler warnings http://qi-hw.com/p/ben-wpan/23f84bc | 15:06 |
qi-bot | [commit] Werner Almesberger: atusb/fw3: added proper versioning http://qi-hw.com/p/ben-wpan/908e04c | 15:06 |
qi-bot | [commit] Werner Almesberger: atusb/fw3: split USB driver into chip-specifc and general part http://qi-hw.com/p/ben-wpan/983d330 | 15:06 |
qi-bot | [commit] Werner Almesberger: atusb/fw2: removed FreakUSB-based firmware http://qi-hw.com/p/ben-wpan/96f0f2c | 15:08 |
qi-bot | [commit] Werner Almesberger: atusb/fw3/: added copyright headers and title comments http://qi-hw.com/p/ben-wpan/f9f0d16 | 15:57 |
qi-bot | [commit] Werner Almesberger: fw3/: remove probably useless RF debug output code from board.c http://qi-hw.com/p/ben-wpan/10fb014 | 15:57 |
qi-bot | [commit] Werner Almesberger: atusb/fw2/usb/: clean up comments left over from C8051F326 http://qi-hw.com/p/ben-wpan/3bdc2da | 15:57 |
qi-bot | [commit] kyak: fbterm: install .fbtermrc (should fix long first start) http://qi-hw.com/p/openwrt-packages/f3d3e66 | 19:06 |
qi-bot | [commit] kyak: supertux: update some images http://qi-hw.com/p/openwrt-packages/9b8ade4 | 20:16 |
qi-bot | [commit] Xiangfu Liu: update package revision to 25513, xfce: using nls.mk http://qi-hw.com/p/openwrt-xburst/e2738c0 | 00:20 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: write default u-boot env to nand where first boot http://qi-hw.com/p/openwrt-packages/65c0e03 | 01:06 |
qi-bot | [commit] kyak: ben-cyrillic: remove small glitch in fonts http://qi-hw.com/p/openwrt-packages/e82c47b | 03:21 |
qi-bot | [commit] kyak: setfont2: remove small glitch in fonts http://qi-hw.com/p/setfont2/30bc035 | 03:22 |
qi-bot | [commit] kyak: setfont2: update to the latest git http://qi-hw.com/p/openwrt-packages/154d831 | 03:23 |
qi-bot | [commit] David Kühling: brainless: use faster gforth-fast interpreter; upstream fixes http://qi-hw.com/p/openwrt-packages/13c75d1 | 06:37 |
qi-bot | [commit] David Kühling: add icon for brainless (launched in utf-8 graphics mode in a jfbterm) http://qi-hw.com/p/gmenu2x/63f462c | 06:39 |
qi-bot | [commit] bartbes: nlove: Font display fix http://qi-hw.com/p/openwrt-packages/48effcf | 08:36 |
qi-bot | [commit] Werner Almesberger: cameo: new command "stats" to print path statistics http://qi-hw.com/p/cae-tools/dfc53c7 | 15:37 |
qi-bot | [commit] bartbes: Add nlove-run to nlove package http://qi-hw.com/p/openwrt-packages/90251ca | 16:31 |
qi-bot | [commit] bartbes: Fixed nlove makefile http://qi-hw.com/p/openwrt-packages/8dca631 | 16:35 |
qi-bot | [commit] bartbes: Fixed nlove-run so it won't keep redownloading http://qi-hw.com/p/openwrt-packages/e901f0f | 16:57 |
qi-bot | [commit] Xiangfu Liu: config.full_system disable some demo and examples http://qi-hw.com/p/openwrt-xburst/b0785fe | 17:07 |
qi-bot | [commit] Xiangfu Liu: uboot-xburst, add ubifs support http://qi-hw.com/p/openwrt-xburst/1c3f083 | 17:07 |
qi-bot | [commit] kyak: supertux: initial port http://qi-hw.com/p/openwrt-packages/8be5174 | 19:10 |
qi-bot | [commit] David Kühling: add shortcut for dunnet: emacs built in text adventure, run in batch mode http://qi-hw.com/p/gmenu2x/d43223c | 08:22 |
---|---|---|
qi-bot | [commit] David Kühling: add icon for sokoban game: an example included with gforth http://qi-hw.com/p/gmenu2x/b500059 | 08:40 |
qi-bot | [commit] Werner Almesberger: zprobe: improvised digital high-Z probe http://qi-hw.com/p/wernermisc/59901f5 | 09:16 |
qi-bot | [commit] Werner Almesberger: zprobe: swap D1 and R1, so that we don't try to route under the LED http://qi-hw.com/p/wernermisc/ae3c89c | 11:31 |
qi-bot | [commit] kyak: ben-cyrillic: add unicode box drawing characters http://qi-hw.com/p/openwrt-packages/8d08a77 | 14:51 |
qi-bot | [commit] kyak: add box drawing glyphs to setfont2 6x10 font and unicode mapping http://qi-hw.com/p/setfont2/c6bbb45 | 15:01 |
qi-bot | [commit] kyak: setfont2: update to the latest git, install unicode mapping file http://qi-hw.com/p/openwrt-packages/9a2b57d | 15:03 |
qi-bot | [commit] kyak: gmenu2x: load unicode mapping file at start http://qi-hw.com/p/gmenu2x/db48e73 | 15:07 |
qi-bot | [commit] kyak: gmenu2x: update to the latest git http://qi-hw.com/p/openwrt-packages/4e80022 | 15:08 |
qi-bot | [commit] David Kühling: new package: brainless: a chess playing program written completely in ANS Forth http://qi-hw.com/p/openwrt-packages/bb6e98b | 15:48 |
qi-bot | [commit] kyak: setfont2: adapt to generic Makefile from package http://qi-hw.com/p/openwrt-packages/1e5fb2b | 16:57 |
qi-bot | [commit] kyak: abook: use unicode line drawing characters http://qi-hw.com/p/openwrt-packages/5d1ca26 | 17:24 |
qi-bot | [commit] kyak: w3m: use wide ncurses http://qi-hw.com/p/openwrt-packages/728d37c | 02:48 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: gs, small fix http://qi-hw.com/p/openwrt-packages/484b030 | 04:07 |
qi-bot | [commit] Werner Almesberger: avrdude/atmega32u2.patch: experimental configuration for the ATmega32U2 http://qi-hw.com/p/ben-blinkenlights/36a4499 | 06:54 |
qi-bot | [commit] Werner Almesberger: fw2/Makefile: use the ATmega32U2 configuration (experimental) of avrdude http://qi-hw.com/p/ben-wpan/85612e5 | 07:55 |
qi-bot | [commit] Werner Almesberger: fw2/Makefile: cleaned up FreakUSB object file location http://qi-hw.com/p/ben-wpan/075c379 | 07:55 |
qi-bot | [commit] Werner Almesberger: fw2/Makefile: dependencies, verbosity control, cleanup http://qi-hw.com/p/ben-wpan/c1dc00e | 07:55 |
qi-bot | [commit] Xiangfu Liu: enable the toolchain option for Octave and libgfortran http://qi-hw.com/p/openwrt-xburst/43f221e | 09:26 |
qi-bot | [commit] Xiangfu Liu: config.full_system-add-more-php5-modules.patch http://qi-hw.com/p/openwrt-xburst/cd9b182 | 09:26 |
qi-bot | [commit] Xiangfu Liu: config.full_system: add package sqlite2-cli http://qi-hw.com/p/openwrt-xburst/dbea9b6 | 09:26 |
qi-bot | [commit] Xiangfu Liu: feeds.conf add @revision to feeds.conf http://qi-hw.com/p/openwrt-xburst/ee071c1 | 09:26 |
qi-bot | [commit] Xiangfu Liu: INSTALL_FGORTRAN needs those two options http://qi-hw.com/p/openwrt-xburst/8a5b79f | 09:26 |
qi-bot | [commit] Xiangfu Liu: config.full_system: add recently new packages http://qi-hw.com/p/openwrt-xburst/e40ef1a | 09:26 |
qi-bot | [commit] Xiangfu Liu: config.full_system remove sshfs, not working under dropbear ssh server http://qi-hw.com/p/openwrt-xburst/0cec8f0 | 09:26 |
qi-bot | [commit] Xiangfu Liu: add vm.overcommit_memory = 1 sysctl.conf http://qi-hw.com/p/openwrt-xburst/8b18d2a | 09:26 |
qi-bot | [commit] Xiangfu Liu: feeds.conf update packages revision to 25034 http://qi-hw.com/p/openwrt-xburst/70f277d | 09:26 |
qi-bot | [commit] Xiangfu Liu: config.full_system include plplot-demo http://qi-hw.com/p/openwrt-xburst/6d3ecce | 09:26 |
qi-bot | [commit] Xiangfu Liu: merge all_package and full_system to one http://qi-hw.com/p/openwrt-xburst/1ef5fe6 | 09:26 |
qi-bot | [commit] Xiangfu Liu: config.full_system, remove build uboot for avt2 n516 sakc http://qi-hw.com/p/openwrt-xburst/2eaad54 | 09:26 |
qi-bot | [commit] kyak: mplayer: use "tremor" as default audio codec http://qi-hw.com/p/openwrt-xburst/cda8e10 | 09:26 |
qi-bot | [commit] David Kühling: make libgfortran depend on @INSTALL_GFORTRAN toolchain option http://qi-hw.com/p/openwrt-xburst/4b35abc | 09:26 |
qi-bot | [commit] kyak: enable CONFIG_BUILD_NLS and full versions of iconv/gettext http://qi-hw.com/p/openwrt-xburst/de4d564 | 09:26 |
qi-bot | [commit] Xiangfu Liu: config.debug/minimal enable rootfs tar.gz http://qi-hw.com/p/openwrt-xburst/37a83b2 | 09:26 |
qi-bot | [commit] Xiangfu Liu: move those files to nanonote-files package http://qi-hw.com/p/openwrt-xburst/66b79a7 | 09:26 |
qi-bot | [commit] Xiangfu Liu: config.full_system add nanonote script files package http://qi-hw.com/p/openwrt-xburst/dfafcd2 | 09:26 |
qi-bot | [commit] Xiangfu Liu: u-boot add-more-boot-option http://qi-hw.com/p/openwrt-xburst/7def992 | 09:26 |
qi-bot | [commit] Xiangfu Liu: update feeds.conf revision for recently NLS update http://qi-hw.com/p/openwrt-xburst/950b960 | 09:26 |
qi-bot | [commit] kyak: gmenu2x: update to the latest revision http://qi-hw.com/p/openwrt-packages/fdae3a6 | 14:02 |
qi-bot | [commit] Xiangfu Liu: update feeds.conf revision for recently NLS update http://qi-hw.com/p/openwrt-xburst/40c0a98 | 04:01 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: nanonote script file mtd.nn update help message and data partition size http://qi-hw.com/p/openwrt-packages/c631197 | 05:25 |
qi-bot | [commit] Werner Almesberger: atusb/fw2: support device -> host side of the ATUSB EP0 protocol http://qi-hw.com/p/ben-wpan/ec21e4b | 05:54 |
qi-bot | [commit] Werner Almesberger: atusb/cam/mkmk: updated board parameters for latest run http://qi-hw.com/p/ben-wpan/dadc683 | 05:54 |
qi-bot | [commit] Werner Almesberger: atusb/fw2/ep0.c: make commands needed for sending work http://qi-hw.com/p/ben-wpan/6969e7d | 05:54 |
qi-bot | [commit] Werner Almesberger: atusb/fw2/: move board-specific items to board-specific file http://qi-hw.com/p/ben-wpan/4f0af39 | 05:54 |
qi-bot | [commit] Werner Almesberger: atusb/fw2/: assigned hardware revision code point; some cleanup http://qi-hw.com/p/ben-wpan/dcfa689 | 05:54 |
qi-bot | [commit] Werner Almesberger: atusb/fw2: added proper support for interrupt polling http://qi-hw.com/p/ben-wpan/3e9f961 | 05:54 |
qi-bot | [commit] Werner Almesberger: atusb/fw2: autonomously restore the clock output settings after an RF reset http://qi-hw.com/p/ben-wpan/e8b6804 | 22:20 |
qi-bot | [commit] Werner Almesberger: atusb.brd: small layout improvements, mainly for solderability http://qi-hw.com/p/ben-wpan/6968441 | 22:20 |
qi-bot | [commit] Werner Almesberger: atusb.brd: draw in bottom edge by 5 mil to prevent touching the connector http://qi-hw.com/p/ben-wpan/509542a | 22:20 |
qi-bot | [commit] Werner Almesberger: atusb/fw2: further abstract board functions http://qi-hw.com/p/ben-wpan/f8fbb02 | 22:20 |
qi-bot | [commit] Werner Almesberger: tools/lib: cache chip ID in the descriptor http://qi-hw.com/p/ben-wpan/e73ca5f | 22:20 |
qi-bot | [commit] Werner Almesberger: tools: give the driver control over CLKM (for ATmega32U2 boards) http://qi-hw.com/p/ben-wpan/b0c15b7 | 22:20 |
qi-bot | [commit] Werner Almesberger: tools/lib/Makefile (clean): didn't remove Ben-specific object files http://qi-hw.com/p/ben-wpan/19926ae | 22:20 |
qi-bot | [commit] Werner Almesberger: atrf-id.c (show_usb_info): pretty-print the MCU type for ATUSB boards http://qi-hw.com/p/ben-wpan/1d6fbcb | 22:20 |
qi-bot | [commit] kyak: qstardict: needs setting QMAKE_CXX explicitely http://qi-hw.com/p/openwrt-packages/70f6198 | 03:41 |
---|---|---|
qi-bot | [commit] kyak: links: update version, enable openssl, enable svgalib (working!) http://qi-hw.com/p/openwrt-packages/d799c0a | 04:00 |
qi-bot | [commit] kyak: links: forcedly disable mouse for svgalib http://qi-hw.com/p/openwrt-packages/5030cca | 06:05 |
qi-bot | [commit] kyak: links2: add gmenu2x icon http://qi-hw.com/p/gmenu2x/b891feb | 12:57 |
qi-bot | [commit] David Kühling: svgalib: fix mode detection (used to detect non-existent 24-bit modes) http://qi-hw.com/p/openwrt-packages/bc95471 | 16:30 |
qi-bot | [commit] David Kühling: add icon for zgv http://qi-hw.com/p/gmenu2x/d5cef5b | 16:52 |
qi-bot | [commit] David Kühling: add icon for gnuplot http://qi-hw.com/p/gmenu2x/766824f | 17:08 |
qi-bot | [commit] Werner Almesberger: nanonote.patch: decrease extra delay from 100 to 20 us (sufficient and faster) http://qi-hw.com/p/ben-blinkenlights/0d6dddf | 19:21 |
qi-bot | [commit] Werner Almesberger: atusb/fw2: firmware for the AVR-based atusb (in progress) http://qi-hw.com/p/ben-wpan/259400f | 21:19 |
---|---|---|
qi-bot | [commit] Werner Almesberger: atusb/fw2: moved board-specific functions (SPI, RF reset) out of main() http://qi-hw.com/p/ben-wpan/1c004ee | 21:19 |
qi-bot | [commit] Werner Almesberger: fw2/usb/patches/correct-array-size.patch: correct memset in ctrl_get_status http://qi-hw.com/p/ben-wpan/06f6174 | 21:19 |
qi-bot | [commit] Xiangfu Liu: config.full_system add nanonote script files package http://qi-hw.com/p/openwrt-xburst/eeb3803 | 00:58 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: add more boot option default value to fw_setenv_default http://qi-hw.com/p/openwrt-packages/c9080ab | 02:02 |
qi-bot | [commit] Xiangfu Liu: u-boot add-more-boot-option http://qi-hw.com/p/openwrt-xburst/e8eeb9d | 02:02 |
qi-bot | [commit] Werner Almesberger: ubb: cleaned up board for "production readiness" http://qi-hw.com/p/ben-blinkenlights/7fba9a2 | 05:22 |
qi-bot | [commit] Werner Almesberger: atben: straightened traces inside 8:10 card slot to reduce risk of shorts http://qi-hw.com/p/ben-wpan/bb2894f | 05:46 |
qi-bot | [commit] Xiangfu Liu: using 'strip' instead of 'sstrip' http://qi-hw.com/p/openwrt-xburst/708d901 | 15:20 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: config.full_system, add math stuff and some new pakcages http://qi-hw.com/p/openwrt-xburst/b0ccf2b | 15:20 |
qi-bot | [commit] kyak: put qi openwrt-packages git on top in feed.conf http://qi-hw.com/p/openwrt-xburst/60dec5b | 15:20 |
qi-bot | [commit] David Kühling: use ccache also for C++ compilation http://qi-hw.com/p/openwrt-xburst/a63d39d | 15:20 |
qi-bot | [commit] Xiangfu Liu: enable the toolchain option for Octave and libgfortran http://qi-hw.com/p/openwrt-xburst/8e334fb | 15:20 |
qi-bot | [commit] Xiangfu Liu: config.full_system-add-more-php5-modules.patch http://qi-hw.com/p/openwrt-xburst/752f820 | 15:20 |
qi-bot | [commit] Xiangfu Liu: config.full_system: add package sqlite2-cli http://qi-hw.com/p/openwrt-xburst/ebf59b7 | 15:20 |
qi-bot | [commit] Xiangfu Liu: feeds.conf add @revision to feeds.conf http://qi-hw.com/p/openwrt-xburst/b458f29 | 15:20 |
qi-bot | [commit] Xiangfu Liu: INSTALL_FGORTRAN needs those two options http://qi-hw.com/p/openwrt-xburst/351a2b5 | 15:20 |
qi-bot | [commit] Xiangfu Liu: config.full_system: add recently new packages http://qi-hw.com/p/openwrt-xburst/3adb62d | 15:20 |
qi-bot | [commit] Xiangfu Liu: config.full_system remove sshfs, not working under dropbear ssh server http://qi-hw.com/p/openwrt-xburst/376949e | 15:20 |
qi-bot | [commit] Xiangfu Liu: add vm.overcommit_memory = 1 sysctl.conf http://qi-hw.com/p/openwrt-xburst/775a29c | 15:20 |
qi-bot | [commit] Xiangfu Liu: feeds.conf update packages revision to 25034 http://qi-hw.com/p/openwrt-xburst/5844648 | 15:20 |
qi-bot | [commit] Xiangfu Liu: config.full_system include plplot-demo http://qi-hw.com/p/openwrt-xburst/a9fb79e | 15:20 |
qi-bot | [commit] Xiangfu Liu: merge all_package and full_system to one http://qi-hw.com/p/openwrt-xburst/ed2bf81 | 15:20 |
qi-bot | [commit] Xiangfu Liu: config.full_system, remove build uboot for avt2 n516 sakc http://qi-hw.com/p/openwrt-xburst/3d49b3f | 15:20 |
qi-bot | [commit] kyak: mplayer: use "tremor" as default audio codec http://qi-hw.com/p/openwrt-xburst/94bbe32 | 15:20 |
qi-bot | [commit] David Kühling: make libgfortran depend on @INSTALL_GFORTRAN toolchain option http://qi-hw.com/p/openwrt-xburst/deda4c0 | 15:20 |
qi-bot | [commit] kyak: Merge branch 'master' of projects.qi-hardware.com:openwrt-xburst http://qi-hw.com/p/openwrt-xburst/65de171 | 15:20 |
qi-bot | [commit] kyak: enable CONFIG_BUILD_NLS and full versions of iconv/gettext http://qi-hw.com/p/openwrt-xburst/02431e8 | 15:20 |
qi-bot | [commit] kyak: libsdl-*: use ICONV notation http://qi-hw.com/p/openwrt-packages/4abe594 | 15:22 |
qi-bot | [commit] kyak: sdcv: use ICONV notation http://qi-hw.com/p/openwrt-packages/5fb08d2 | 15:22 |
qi-bot | [commit] kyak: qstardict: use ICONV notation http://qi-hw.com/p/openwrt-packages/9213cf1 | 15:22 |
qi-bot | [commit] kyak: mplayer: use ICONV notation http://qi-hw.com/p/openwrt-packages/e027bf3 | 15:22 |
qi-bot | [commit] kyak: qball: use ICONV notation http://qi-hw.com/p/openwrt-packages/24d2f33 | 15:22 |
qi-bot | [commit] kyak: gnome-mime-data: use ICONV notation http://qi-hw.com/p/openwrt-packages/a8cf59d | 15:22 |
qi-bot | [commit] kyak: moc: use ICONV notation http://qi-hw.com/p/openwrt-packages/a3dc295 | 15:22 |
qi-bot | [commit] kyak: scummvm: use ICONV notation http://qi-hw.com/p/openwrt-packages/cecaa7d | 15:22 |
qi-bot | [commit] kyak: zhcon: use ICONV notation http://qi-hw.com/p/openwrt-packages/f0c9c3b | 15:22 |
qi-bot | [commit] kyak: gnuplot-gfx: use ICONV notation http://qi-hw.com/p/openwrt-packages/b1ccf98 | 15:22 |
qi-bot | [commit] kyak: tntnet: use ICONV notation http://qi-hw.com/p/openwrt-packages/4c177d9 | 15:22 |
qi-bot | [commit] kyak: libgnome-vfs: use ICONV notation http://qi-hw.com/p/openwrt-packages/ace4d8d | 15:22 |
qi-bot | [commit] kyak: mcabber: use ICONV notation http://qi-hw.com/p/openwrt-packages/5bc9228 | 15:22 |
qi-bot | [commit] kyak: ncmpc: use ICONV notation http://qi-hw.com/p/openwrt-packages/4d84a5e | 15:22 |
qi-bot | [commit] kyak: odt2txt: use ICONV notation http://qi-hw.com/p/openwrt-packages/dc7e1be | 15:22 |
qi-bot | [commit] kyak: offrss: use ICONV notation http://qi-hw.com/p/openwrt-packages/3cda7c2 | 15:22 |
qi-bot | [commit] kyak: plucker: use ICONV notation http://qi-hw.com/p/openwrt-packages/daa3743 | 15:22 |
qi-bot | [commit] kyak: snownews: use ICONV notation http://qi-hw.com/p/openwrt-packages/c88e1ca | 15:22 |
qi-bot | [commit] kyak: stardict: use ICONV notation http://qi-hw.com/p/openwrt-packages/80909bc | 15:22 |
qi-bot | [commit] kyak: vido: use ICONV notation http://qi-hw.com/p/openwrt-packages/dac30c3 | 15:22 |
qi-bot | [commit] Werner Almesberger: uart.sch: KiCad resents 0.1", changed to 0.1 in http://qi-hw.com/p/ben-blinkenlights/0e203be | 15:44 |
qi-bot | [commit] Werner Almesberger: fpd2pdf: added option -P to select full-page drawings http://qi-hw.com/p/eda-tools/e7a2cdc | 18:06 |
qi-bot | [commit] Xiangfu Liu: config.debug/minimal enable rootfs tar.gz http://qi-hw.com/p/openwrt-xburst/f1eabcf | 22:29 |
qi-bot | [commit] Xiangfu Liu: nanonote-example-files, install to data, prepare for add script-files http://qi-hw.com/p/openwrt-packages/a08dac6 | 22:37 |
qi-bot | [commit] Xiangfu Liu: stardict-dic-en-cn fix typo http://qi-hw.com/p/openwrt-packages/5c39758 | 22:37 |
qi-bot | [commit] Xiangfu Liu: add nanonote script files http://qi-hw.com/p/openwrt-packages/eea1ff0 | 22:37 |
qi-bot | [commit] Xiangfu Liu: rename nanonote-example files http://qi-hw.com/p/openwrt-packages/868eb3b | 22:37 |
qi-bot | [commit] Xiangfu Liu: move those files to nanonote-files package http://qi-hw.com/p/openwrt-xburst/547f886 | 22:59 |
qi-bot | [commit] Xiangfu Liu: nanonote-files move from openwrt-xburst http://qi-hw.com/p/openwrt-packages/cdabb55 | 22:59 |
qi-bot | [commit] Werner Almesberger: atusb-pgm: leave CLK unused (reserved for boards needing an external clock) http://qi-hw.com/p/ben-wpan/ecd9f4a | 15:59 |
---|---|---|
qi-bot | [commit] Werner Almesberger: uart/avrdude: moved avrdude.conf.in change for UART to separate patch http://qi-hw.com/p/ben-blinkenlights/9024942 | 16:00 |
qi-bot | [commit] Werner Almesberger: uart/avrdude: added patch for pin assignment of the ATUSB-pgm adapter http://qi-hw.com/p/ben-blinkenlights/1557630 | 16:00 |
qi-bot | [commit] Werner Almesberger: uart/avrdude: various corrections http://qi-hw.com/p/ben-blinkenlights/9778f3f | 16:00 |
qi-bot | [commit] Werner Almesberger: nanonote-atusb.patch (avrdude.conf.in): reassign pins for latest atusb-pgm http://qi-hw.com/p/ben-blinkenlights/375208a | 16:00 |
qi-bot | [commit] David Kühling: Add gfortran compiler support to the toolchain http://qi-hw.com/p/openwrt-xburst/f5119f5 | 22:20 |
qi-bot | [commit] Xiangfu Liu: configu.full_system: remove IB and Toolchain http://qi-hw.com/p/openwrt-xburst/06bb87e | 22:20 |
qi-bot | [commit] Xiangfu Liu: using 'strip' instead of 'sstrip' http://qi-hw.com/p/openwrt-xburst/f8ecc70 | 22:20 |
qi-bot | [commit] Xiangfu Liu: config.full_system, add math stuff and some new pakcages http://qi-hw.com/p/openwrt-xburst/68cfe91 | 22:20 |
qi-bot | [commit] kyak: put qi openwrt-packages git on top in feed.conf http://qi-hw.com/p/openwrt-xburst/02b1b64 | 22:20 |
qi-bot | [commit] David Kühling: use ccache also for C++ compilation http://qi-hw.com/p/openwrt-xburst/f1339eb | 22:20 |
qi-bot | [commit] Xiangfu Liu: enable the toolchain option for Octave and libgfortran http://qi-hw.com/p/openwrt-xburst/bcd0047 | 22:20 |
qi-bot | [commit] Xiangfu Liu: config.full_system-add-more-php5-modules.patch http://qi-hw.com/p/openwrt-xburst/6517281 | 22:20 |
qi-bot | [commit] Xiangfu Liu: config.full_system: add package sqlite2-cli http://qi-hw.com/p/openwrt-xburst/551af8f | 22:20 |
qi-bot | [commit] Xiangfu Liu: feeds.conf add @revision to feeds.conf http://qi-hw.com/p/openwrt-xburst/986c01f | 22:20 |
qi-bot | [commit] Xiangfu Liu: INSTALL_FGORTRAN needs those two options http://qi-hw.com/p/openwrt-xburst/869ccb4 | 22:20 |
qi-bot | [commit] Xiangfu Liu: config.full_system: add recently new packages http://qi-hw.com/p/openwrt-xburst/6eb967d | 22:20 |
qi-bot | [commit] Xiangfu Liu: config.full_system remove sshfs, not working under dropbear ssh server http://qi-hw.com/p/openwrt-xburst/54d5915 | 22:20 |
qi-bot | [commit] Xiangfu Liu: add vm.overcommit_memory = 1 sysctl.conf http://qi-hw.com/p/openwrt-xburst/b6ebc53 | 22:20 |
qi-bot | [commit] Xiangfu Liu: feeds.conf update packages revision to 25034 http://qi-hw.com/p/openwrt-xburst/ff0488b | 22:20 |
qi-bot | [commit] Xiangfu Liu: config.full_system include plplot-demo http://qi-hw.com/p/openwrt-xburst/d48d842 | 22:20 |
qi-bot | [commit] Xiangfu Liu: merge all_package and full_system to one http://qi-hw.com/p/openwrt-xburst/81f66cd | 22:20 |
qi-bot | [commit] Xiangfu Liu: config.full_system, remove build uboot for avt2 n516 sakc http://qi-hw.com/p/openwrt-xburst/195062a | 22:20 |
qi-bot | [commit] kyak: mplayer: use "tremor" as default audio codec http://qi-hw.com/p/openwrt-xburst/fd199b2 | 22:20 |
qi-bot | [commit] David Kühling: make libgfortran depend on @INSTALL_GFORTRAN toolchain option http://qi-hw.com/p/openwrt-xburst/7acbfd1 | 22:20 |
qi-bot | [commit] Werner Almesberger: ubb: universal breakout board in 8:10 card format http://qi-hw.com/p/ben-blinkenlights/8172464 | 00:06 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ubb/cam: CAM process for cutting the PCB, now with parametrized "mkmk" http://qi-hw.com/p/ben-blinkenlights/5b7cc3e | 00:06 |
qi-bot | [commit] Werner Almesberger: atmega8u2.lib (PB2): end list of pin names with a slash if wrapped http://qi-hw.com/p/ben-wpan/b323100 | 01:49 |
qi-bot | [commit] Werner Almesberger: atusb-pgm: programming adapter that connects to the Universal Breakout Board http://qi-hw.com/p/ben-wpan/4521837 | 01:49 |
qi-bot | [commit] Werner Almesberger: modules/pads.fpd: added 80 mil / 2 mm circular pad "PAD_80x80" http://qi-hw.com/p/kicad-libs/cf1240d | 11:56 |
qi-bot | [commit] Werner Almesberger: atusb-pgm: changed pogo pad footprint from 60 mil diameter to 80 mil (PAD_80x80) http://qi-hw.com/p/ben-wpan/0e11d58 | 11:56 |
qi-bot | [commit] David Kühling: zgv: fix thumbnail-less file-browser true-color support ('v' key) http://qi-hw.com/p/openwrt-packages/3f26604 | 16:26 |
qi-bot | [commit] kyak: qball: make Enter key work and change fonts http://qi-hw.com/p/openwrt-packages/9da19d4 | 09:42 |
---|
qi-bot | [commit] kyak: backgammon: set 4x8 to avoid segfault http://qi-hw.com/p/openwrt-packages/2975657 | 12:57 |
---|---|---|
qi-bot | [commit] bartbes: Backgammon launcher now uses backgammon.sh http://qi-hw.com/p/gmenu2x/c619594 | 13:11 |
qi-bot | [commit] Werner Almesberger: uart/cam/: the usual CAM process for cutting the PCB http://qi-hw.com/p/ben-blinkenlights/f67f7a9 | 19:57 |
qi-bot | [commit] Werner Almesberger: uart/avrdude/: patch and build instructions for avrdude http://qi-hw.com/p/ben-blinkenlights/1826cc2 | 19:57 |
qi-bot | [commit] Werner Almesberger: uart/fw/: dummy firmware with build and programming process http://qi-hw.com/p/ben-blinkenlights/979be29 | 20:48 |
qi-bot | [commit] Joachim Steiger: more exact button assembly instructions http://qi-hw.com/p/m1/caf3271 | 21:40 |
qi-bot | [commit] Werner Almesberger: uart/Makefile: forgot to commit this one. oopsie. http://qi-hw.com/p/ben-blinkenlights/0ec7bb4 | 21:46 |
qi-bot | [commit] Werner Almesberger: uart: added more values to schematics, added files for BOM processing http://qi-hw.com/p/ben-blinkenlights/5d7c78e | 21:46 |
qi-bot | [commit] Wolfgang Spraul: improved label http://qi-hw.com/p/m1/60127c6 | 01:00 |
---|---|---|
qi-bot | [commit] Werner Almesberger: atusb/cam/mkmk: updated for latest board parameters http://qi-hw.com/p/ben-wpan/e6b0ee5 | 03:04 |
qi-bot | [commit] Werner Almesberger: atben.sch: corrected typo "sLP_TR" http://qi-hw.com/p/ben-wpan/14b0082 | 03:04 |
qi-bot | [commit] Werner Almesberger: Added ATmega8U2/16U2/32U2 schematics symbol. http://qi-hw.com/p/ben-wpan/5b9263b | 03:04 |
qi-bot | [commit] Werner Almesberger: atusb: replaced the C8051F326 with an ATmega32U2 (still needs cleanup) http://qi-hw.com/p/ben-wpan/6aa4e30 | 03:04 |
qi-bot | [commit] Werner Almesberger: atben/cam/mkmk: updated for latest board parameters http://qi-hw.com/p/ben-wpan/ded90ef | 03:04 |
qi-bot | [commit] Werner Almesberger: atusb: cleaned up USB schematics http://qi-hw.com/p/ben-wpan/318f29c | 03:04 |
qi-bot | [commit] Werner Almesberger: atusb: new layout for the ATmega32U2 http://qi-hw.com/p/ben-wpan/d8dfb50 | 03:04 |
qi-bot | [commit] Werner Almesberger: usb.sch: corrected symbol name http://qi-hw.com/p/ben-wpan/ebaffb5 | 03:10 |
qi-bot | [commit] Werner Almesberger: atusb.brd: ground zone adjustments; corrected date code location http://qi-hw.com/p/ben-wpan/8e842ba | 10:08 |
qi-bot | [commit] Werner Almesberger: usb.sch: cleanup and track layout http://qi-hw.com/p/ben-wpan/847b354 | 10:08 |
qi-bot | [commit] Werner Almesberger: qfn.fpd: added draft for Atmel VQFN28 (ATmega48) http://qi-hw.com/p/ben-wpan/5a9ec34 | 17:02 |
qi-bot | [commit] Werner Almesberger: Added simple UART 8:10 card. http://qi-hw.com/p/ben-blinkenlights/e7ec5c8 | 17:11 |
qi-bot | [commit] Werner Almesberger: cameo: allow for rounding errors KiCad produces with a metric grid http://qi-hw.com/p/cae-tools/6947b3a | 17:40 |
qi-bot | [commit] Werner Almesberger: uart: the AVR requires nSS for slave mode http://qi-hw.com/p/ben-blinkenlights/d3ab4ab | 19:39 |
qi-bot | [commit] David Kühling: make libgfortran depend on @INSTALL_GFORTRAN toolchain option http://qi-hw.com/p/openwrt-xburst/deda4c0 | 07:55 |
---|---|---|
qi-bot | [commit] David Kühling: plplot: fix svgalib driver display bug w/ plenv() resetting current color http://qi-hw.com/p/openwrt-packages/be5eeea | 13:25 |
qi-bot | [commit] David Kühling: plplot: fix detection of target octave headers, libs and install directories http://qi-hw.com/p/openwrt-packages/3613fcb | 06:52 |
---|---|---|
qi-bot | [commit] David Kühling: plplot: fix various target Tcl detection issues. http://qi-hw.com/p/openwrt-packages/f5d48e7 | 07:10 |
qi-bot | [commit] David Kühling: svgalib: use faster non-paged drawing primitives http://qi-hw.com/p/openwrt-packages/9c4f171 | 08:23 |
qi-bot | [commit] David Kühling: svgalib: fix (?) gl_fillbox & friends when used in 32-bit video modes http://qi-hw.com/p/openwrt-packages/8b59d50 | 08:50 |
qi-bot | [commit] David Kühling: svgalib: do _not_ attempt to use linear video modes for now: buggy!? http://qi-hw.com/p/openwrt-packages/53a2848 | 09:00 |
qi-bot | [commit] David Kühling: zgv: more fixes for proper truecolor mode operation: img browser works now http://qi-hw.com/p/openwrt-packages/3266da3 | 09:00 |
qi-bot | [commit] David Kühling: zgv: pre-configure a more modern color-scheme http://qi-hw.com/p/openwrt-packages/f324527 | 13:16 |
qi-bot | [commit] Xiangfu Liu: move all nanonote openwrt package file to this repo http://qi-hw.com/p/gmenu2x/fbcbd87 | 02:32 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: add some sections http://qi-hw.com/p/gmenu2x/1d8fe2c | 02:53 |
qi-bot | [commit] Xiangfu Liu: gmenu2x move all file to it's repo, keep here as small as possible http://qi-hw.com/p/openwrt-packages/fcb5476 | 03:20 |
qi-bot | [commit] Wolfgang Spraul: removed Made on Earth http://qi-hw.com/p/m1/0d44fa9 | 03:45 |
qi-bot | [commit] Wolfgang Spraul: first product label draft http://qi-hw.com/p/m1/5cff85a | 03:15 |
---|
qi-bot | [commit] Xiangfu Liu: emacs, remove manully strip binary file http://qi-hw.com/p/openwrt-packages/9e6dd9d | 00:41 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: config.full_system, remove build uboot for avt2 n516 sakc http://qi-hw.com/p/openwrt-xburst/3d49b3f | 02:55 |
qi-bot | [commit] kyak: mplayer: explicitely disable X11 features http://qi-hw.com/p/openwrt-packages/6b0e5bb | 04:21 |
qi-bot | [commit] kyak: mplayer: use "tremor" as default audio codec http://qi-hw.com/p/openwrt-xburst/94bbe32 | 05:04 |
qi-bot | [commit] kyak: gottet: fixed size 320x240 http://qi-hw.com/p/openwrt-packages/22e511a | 12:34 |
qi-bot | [commit] Werner Almesberger: atusb/cam/mkmk: move project name to central NAME variable http://qi-hw.com/p/ben-wpan/50bd38c | 03:38 |
---|
qi-bot | [commit] Xiangfu Liu: feeds.conf update packages revision to 25034 http://qi-hw.com/p/openwrt-xburst/5844648 | 04:44 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: config.full_system include plplot-demo http://qi-hw.com/p/openwrt-xburst/a9fb79e | 04:44 |
qi-bot | [commit] kyak: gottet: use maximum Ben's screen height for board http://qi-hw.com/p/openwrt-packages/677918c | 05:12 |
qi-bot | [commit] kyak: qball, gottet, Tile: added gmenu2x items http://qi-hw.com/p/openwrt-packages/479a593 | 05:31 |
qi-bot | [commit] David Kühling: new port: zgv: a simple/leightweight image viewer + browser that uses svgalib http://qi-hw.com/p/openwrt-packages/7fb69c0 | 07:13 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: Unrouted address pins, fixed http://qi-hw.com/p/ben-gps-sdr/b5bb2d3 | 09:35 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: fix reg content for simulation porpuses http://qi-hw.com/p/ben-gps-sdr/757a2f3 | 09:35 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: Simulation enabled in Makefile http://qi-hw.com/p/ben-gps-sdr/a0baeac | 09:35 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: Code fixes for the dual-ported ram setup http://qi-hw.com/p/ben-gps-sdr/33f0c2e | 09:35 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: FPGA Memory sized fixed to max allowed http://qi-hw.com/p/ben-gps-sdr/c856cd1 | 09:35 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: code snipets added to/as notes http://qi-hw.com/p/ben-gps-sdr/c9d0f17 | 09:35 |
qi-bot | [commit] Werner Almesberger: atben.brd: rearranged component references and values for printing/display http://qi-hw.com/p/ben-wpan/84278c8 | 09:44 |
qi-bot | [commit] Werner Almesberger: atusb.brd: some more cleanup after checking the gerbers http://qi-hw.com/p/ben-wpan/b0a5a0c | 09:44 |
qi-bot | [commit] Werner Almesberger: atben, atusb: set solder mask and solder paste clearances to NXP's values http://qi-hw.com/p/ben-wpan/daaac58 | 09:44 |
qi-bot | [commit] Xiangfu Liu: merge all_package and full_system to one http://qi-hw.com/p/openwrt-xburst/ed2bf81 | 12:21 |
qi-bot | [commit] David Kühling: zgv: fix crash from attempt to start browser in 8-bit videomode http://qi-hw.com/p/openwrt-packages/0e75785 | 13:04 |
qi-bot | [commit] Werner Almesberger: 0805-6.fpd: changed from package-based definition to follow Johanson's design http://qi-hw.com/p/ben-wpan/1c573d2 | 13:25 |
qi-bot | [commit] Werner Almesberger: atben.brd: updated balun footprint, some small touch-ups http://qi-hw.com/p/ben-wpan/e9be007 | 13:25 |
qi-bot | [commit] Werner Almesberger: atusb.brd: updated balun footprint http://qi-hw.com/p/ben-wpan/dda673e | 13:25 |
qi-bot | [commit] David Kühling: zgv: basic truecolor support for the thumbnail browser http://qi-hw.com/p/openwrt-packages/0e5906d | 14:09 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: iverilog simulation file missing http://qi-hw.com/p/ben-gps-sdr/162723b | 16:25 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: .gitignore created and initialized http://qi-hw.com/p/ben-gps-sdr/bf88df0 | 17:10 |
qi-bot | [commit] David Kühling: plplot: fix package generation errors (created copies of libs instead of links) http://qi-hw.com/p/openwrt-packages/e75033d | 05:29 |
---|---|---|
qi-bot | [commit] kyak: gottet:Tetris clone written in Qt, adapted for Ben http://qi-hw.com/p/openwrt-packages/325a43c | 06:39 |
qi-bot | [commit] David Kühling: plplot: fix plplot package to include _all_ libraries that ship with plplot http://qi-hw.com/p/openwrt-packages/c32c234 | 06:56 |
qi-bot | [commit] David Kühling: plplot: mark plplot-python as broken and explain why that is so. http://qi-hw.com/p/openwrt-packages/31e8e5b | 07:28 |
qi-bot | [commit] Werner Almesberger: stdpass.fpd: enlarged 0402 and 0603 footprint http://qi-hw.com/p/kicad-libs/e297690 | 09:48 |
qi-bot | [commit] Werner Almesberger: stdpass.fpd: set outline clearance (courtyard) to 0.15/0.25 mm of IPC-7351B http://qi-hw.com/p/kicad-libs/7c62277 | 09:48 |
qi-bot | [commit] Werner Almesberger: qfn.fpd: added measurements and improved design of the central pad http://qi-hw.com/p/ben-wpan/8703fc1 | 23:16 |
qi-bot | [commit] Werner Almesberger: atben: updated for 0402 resizing http://qi-hw.com/p/ben-wpan/e4f38d2 | 23:16 |
qi-bot | [commit] Werner Almesberger: atben.sch: rearranged spacing in schematics to make more room at the feed line http://qi-hw.com/p/ben-wpan/77a3029 | 23:16 |
qi-bot | [commit] Werner Almesberger: atben: introduced optional antenna matching capacitor http://qi-hw.com/p/ben-wpan/8b62741 | 23:16 |
qi-bot | [commit] Werner Almesberger: atusb: replaced old chip components with updated ones http://qi-hw.com/p/ben-wpan/836c89e | 23:16 |
qi-bot | [commit] Werner Almesberger: atusb: introduced optional antenna matching capacitor http://qi-hw.com/p/ben-wpan/30aff81 | 23:16 |
qi-bot | [commit] Werner Almesberger: atusb.brd: rearranged component references and values for printing/display http://qi-hw.com/p/ben-wpan/1d2fdb3 | 23:16 |
qi-bot | [commit] Werner Almesberger: BOOKSHELF: added the ATmega32U2 http://qi-hw.com/p/ben-wpan/2dab099 | 23:16 |
qi-bot | [commit] Werner Almesberger: qfn.fpd: corrected center pads, and general cleanup http://qi-hw.com/p/ben-wpan/3a59aef | 23:16 |
qi-bot | [commit] Werner Almesberger: atben: set AT86F231 footprint to QFN32-VHHD-6 http://qi-hw.com/p/ben-wpan/059d282 | 23:16 |
qi-bot | [commit] Werner Almesberger: atben.brd: added external ground traces to VSS pins adjacent to RF http://qi-hw.com/p/ben-wpan/ea05b19 | 23:52 |
qi-bot | [commit] Werner Almesberger: atben.sch, atben.brd: bumped version to 20110123 http://qi-hw.com/p/ben-wpan/7142959 | 23:52 |
qi-bot | [commit] Werner Almesberger: atusb: updated C8051F326 and AT86RF321 footprints http://qi-hw.com/p/ben-wpan/1f959d9 | 23:52 |
qi-bot | [commit] Werner Almesberger: atusb.brd: added title, origin, and license on silk screen layer http://qi-hw.com/p/ben-wpan/1b5abff | 23:52 |
qi-bot | [commit] Werner Almesberger: atusb.sch, atrf.sch, usb.sch, atusb.brd: bumped version to 20110123 http://qi-hw.com/p/ben-wpan/bcc8ea7 | 23:52 |
qi-bot | [commit] Werner Almesberger: atben.brd, atusb.brd: added design name (ATBEN, ATUSB) to silk screen text http://qi-hw.com/p/ben-wpan/83b903d | 23:52 |
qi-bot | [commit] Xiangfu Liu: config.full_system remove sshfs, not working under dropbear ssh server http://qi-hw.com/p/openwrt-xburst/376949e | 04:38 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: add vm.overcommit_memory = 1 sysctl.conf http://qi-hw.com/p/openwrt-xburst/775a29c | 04:38 |
qi-bot | [commit] Xiangfu Liu: emacs, strip binary after build http://qi-hw.com/p/openwrt-packages/04bb8f8 | 04:40 |
qi-bot | [commit] Xiangfu Liu: mv lus-plplot to Examples folder http://qi-hw.com/p/openwrt-packages/15513ea | 10:05 |
qi-bot | [commit] Adam Wang: Matching part number& datasheet of P1 & P2 for jtag/serial cable pod run1: http://qi-hw.com/p/m1/60f6298 | 02:59 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: nlove, offrss: fix typo and depends http://qi-hw.com/p/openwrt-packages/1fca17c | 07:40 |
qi-bot | [commit] Xiangfu Liu: fix typo http://qi-hw.com/p/openwrt-packages/35f03d9 | 07:51 |
qi-bot | [commit] Xiangfu Liu: offrss, fix description and add -liconv http://qi-hw.com/p/openwrt-packages/404b3fd | 09:41 |
qi-bot | [commit] Werner Almesberger: atrf-txrc.c (usage, main): changed -P to -E to free -P for other use http://qi-hw.com/p/ben-wpan/fc226b2 | 19:09 |
qi-bot | [commit] Werner Almesberger: atrf-txrx: new option -P to select ping mode http://qi-hw.com/p/ben-wpan/f16224f | 19:09 |
qi-bot | [commit] Werner Almesberger: atrf-txrx: new option -r to select data rate http://qi-hw.com/p/ben-wpan/705864d | 19:09 |
qi-bot | [commit] Xiangfu Liu: bc, add -l, use the predefined math routines by default http://qi-hw.com/p/openwrt-packages/216706c | 07:35 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: update the qi-hardware sources mirror address http://qi-hw.com/p/openwrt-xburst/bf27ef7 | 08:13 |
qi-bot | [commit] Xiangfu Liu: bash-files: update the package url http://qi-hw.com/p/openwrt-xburst/e3999a9 | 08:13 |
qi-bot | [commit] Xiangfu Liu: add 127.0.0.1 BenNanoNote to hosts file http://qi-hw.com/p/openwrt-xburst/14981ac | 08:13 |
qi-bot | [commit] David Kühling: fix DNS timeout problem when applications resolve the FQDN http://qi-hw.com/p/openwrt-xburst/5299335 | 08:13 |
qi-bot | [commit] David Kühling: undo hosts file fix. Xiangfu was quicker and did it better :) http://qi-hw.com/p/openwrt-xburst/a7c8d1f | 08:13 |
qi-bot | [commit] David Kühling: Adapt config.full_system to new emacs package name. Add emacs japanese http://qi-hw.com/p/openwrt-xburst/5337fe8 | 08:13 |
qi-bot | [commit] Xiangfu Liu: update package to known-good revisions, thanks David Kuehling http://qi-hw.com/p/openwrt-xburst/c6eda58 | 08:13 |
qi-bot | [commit] Xiangfu Liu: config.all_packages: remove mp3, mp4, rootfs, u-boot http://qi-hw.com/p/openwrt-xburst/698f0ec | 08:13 |
qi-bot | [commit] David Kühling: Add gfortran compiler support to the toolchain http://qi-hw.com/p/openwrt-xburst/57daa05 | 08:13 |
qi-bot | [commit] Xiangfu Liu: configu.full_system: remove IB and Toolchain http://qi-hw.com/p/openwrt-xburst/1ea482b | 08:13 |
qi-bot | [commit] Xiangfu Liu: using 'strip' instead of 'sstrip' http://qi-hw.com/p/openwrt-xburst/672539f | 08:13 |
qi-bot | [commit] Xiangfu Liu: config.full_system, add math stuff and some new pakcages http://qi-hw.com/p/openwrt-xburst/0a3ed89 | 08:13 |
qi-bot | [commit] kyak: put qi openwrt-packages git on top in feed.conf http://qi-hw.com/p/openwrt-xburst/c137e6a | 08:13 |
qi-bot | [commit] David Kühling: use ccache also for C++ compilation http://qi-hw.com/p/openwrt-xburst/1ce0cb7 | 08:13 |
qi-bot | [commit] Xiangfu Liu: enable the toolchain option for Octave and libgfortran http://qi-hw.com/p/openwrt-xburst/536fd95 | 08:13 |
qi-bot | [commit] Xiangfu Liu: config.full_system-add-more-php5-modules.patch http://qi-hw.com/p/openwrt-xburst/6e2a0c1 | 08:13 |
qi-bot | [commit] Xiangfu Liu: config.full_system: add package sqlite2-cli http://qi-hw.com/p/openwrt-xburst/7872756 | 08:13 |
qi-bot | [commit] Xiangfu Liu: feeds.conf add @revision to feeds.conf http://qi-hw.com/p/openwrt-xburst/da282ed | 08:13 |
qi-bot | [commit] Xiangfu Liu: INSTALL_FGORTRAN needs those two options http://qi-hw.com/p/openwrt-xburst/52c8c73 | 08:13 |
qi-bot | [commit] Xiangfu Liu: config.full_system: add recently new packages http://qi-hw.com/p/openwrt-xburst/07b9ae1 | 08:13 |
qi-bot | [commit] Xiangfu Liu: update the qi-hardware sources mirror address http://qi-hw.com/p/openwrt-xburst/efd9373 | 09:20 |
qi-bot | [commit] Xiangfu Liu: bash-files: update the package url http://qi-hw.com/p/openwrt-xburst/b4d7537 | 09:20 |
qi-bot | [commit] Xiangfu Liu: add 127.0.0.1 BenNanoNote to hosts file http://qi-hw.com/p/openwrt-xburst/aaaef18 | 09:20 |
qi-bot | [commit] David Kühling: fix DNS timeout problem when applications resolve the FQDN http://qi-hw.com/p/openwrt-xburst/2a870e5 | 09:20 |
qi-bot | [commit] David Kühling: undo hosts file fix. Xiangfu was quicker and did it better :) http://qi-hw.com/p/openwrt-xburst/38a5421 | 09:20 |
qi-bot | [commit] David Kühling: Adapt config.full_system to new emacs package name. Add emacs japanese http://qi-hw.com/p/openwrt-xburst/d0e0372 | 09:20 |
qi-bot | [commit] Xiangfu Liu: update package to known-good revisions, thanks David Kuehling http://qi-hw.com/p/openwrt-xburst/ef77ca6 | 09:20 |
qi-bot | [commit] Xiangfu Liu: config.all_packages: remove mp3, mp4, rootfs, u-boot http://qi-hw.com/p/openwrt-xburst/5bbdc66 | 09:20 |
qi-bot | [commit] David Kühling: Add gfortran compiler support to the toolchain http://qi-hw.com/p/openwrt-xburst/fae2ee8 | 09:20 |
qi-bot | [commit] Xiangfu Liu: configu.full_system: remove IB and Toolchain http://qi-hw.com/p/openwrt-xburst/94ddef2 | 09:20 |
qi-bot | [commit] Xiangfu Liu: using 'strip' instead of 'sstrip' http://qi-hw.com/p/openwrt-xburst/708d901 | 09:20 |
qi-bot | [commit] Xiangfu Liu: config.full_system, add math stuff and some new pakcages http://qi-hw.com/p/openwrt-xburst/b0ccf2b | 09:20 |
qi-bot | [commit] kyak: put qi openwrt-packages git on top in feed.conf http://qi-hw.com/p/openwrt-xburst/60dec5b | 09:20 |
qi-bot | [commit] David Kühling: use ccache also for C++ compilation http://qi-hw.com/p/openwrt-xburst/a63d39d | 09:20 |
qi-bot | [commit] Xiangfu Liu: enable the toolchain option for Octave and libgfortran http://qi-hw.com/p/openwrt-xburst/8e334fb | 09:20 |
qi-bot | [commit] Xiangfu Liu: config.full_system-add-more-php5-modules.patch http://qi-hw.com/p/openwrt-xburst/752f820 | 09:20 |
qi-bot | [commit] Xiangfu Liu: config.full_system: add package sqlite2-cli http://qi-hw.com/p/openwrt-xburst/ebf59b7 | 09:20 |
qi-bot | [commit] Xiangfu Liu: feeds.conf add @revision to feeds.conf http://qi-hw.com/p/openwrt-xburst/b458f29 | 09:20 |
qi-bot | [commit] Xiangfu Liu: INSTALL_FGORTRAN needs those two options http://qi-hw.com/p/openwrt-xburst/351a2b5 | 09:20 |
qi-bot | [commit] Xiangfu Liu: config.full_system: add recently new packages http://qi-hw.com/p/openwrt-xburst/3adb62d | 09:20 |
qi-bot | [commit] Werner Almesberger: lib/Makefile.common: changed "clean:" to "clean::" to allow for additions http://qi-hw.com/p/f32xbase/ab915dd | 15:55 |
qi-bot | [commit] Werner Almesberger: atrf-txrx: cleaned up the usage output http://qi-hw.com/p/ben-wpan/5407180 | 16:39 |
qi-bot | [commit] Werner Almesberger: atrf-txrx: added ability to record received frames in pcap format http://qi-hw.com/p/ben-wpan/f9aee54 | 16:39 |
qi-bot | [commit] Werner Almesberger: atrf-txrx: added BER test pattern transmit mode http://qi-hw.com/p/ben-wpan/999ce53 | 16:39 |
qi-bot | [commit] Werner Almesberger: atrf-txrx: define the pcap file magic number (0xa1b2c3d4) in pcap.h http://qi-hw.com/p/ben-wpan/ea81e70 | 16:39 |
qi-bot | [commit] Werner Almesberger: atrf-txrx: renamed BER (bit error rate) test to PER (packet ...) test http://qi-hw.com/p/ben-wpan/96e8fc6 | 16:39 |
qi-bot | [commit] Werner Almesberger: misctxrx.c (wait_for_interrupt): let "ignore" control printing more tightly http://qi-hw.com/p/ben-wpan/1fb05c2 | 16:39 |
qi-bot | [commit] Werner Almesberger: tools/atrf-txrx/perdump: new utility to analyze a PER dump http://qi-hw.com/p/ben-wpan/6002759 | 16:39 |
qi-bot | [commit] Werner Almesberger: perdump: print relative receive timestamp http://qi-hw.com/p/ben-wpan/6282c33 | 17:38 |
qi-bot | [commit] Xiangfu Liu: libsdl-gfx, add -liconv to CONFIGURE_VARS http://qi-hw.com/p/openwrt-packages/0308bbc | 02:25 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: config.full_system: add recently new packages http://qi-hw.com/p/openwrt-xburst/5c00c1f | 02:58 |
qi-bot | [commit] Xiangfu Liu: add some lua-plplot-examples http://qi-hw.com/p/openwrt-packages/d3bb3a9 | 03:22 |
qi-bot | [commit] Werner Almesberger: c2brn.brd: updated all footprints to update pad types http://qi-hw.com/p/f32xbase/4b8bcf9 | 14:06 |
qi-bot | [commit] Werner Almesberger: cntr.brd: updated PAD_120x60 to update pad type http://qi-hw.com/p/ben-wpan/c95761d | 14:07 |
qi-bot | [commit] Werner Almesberger: bbl.brd: updated 8:10-CARD to update pad type http://qi-hw.com/p/ben-blinkenlights/623c323 | 14:09 |
qi-bot | [commit] Xiangfu Liu: imgv, add rpath-link to CFLAGS http://qi-hw.com/p/openwrt-packages/cbd9e39 | 22:35 |
qi-bot | [commit] Xiangfu Liu: gmenu2x, update icons, thanks to Yi http://qi-hw.com/p/openwrt-packages/bd28a3a | 22:35 |
qi-bot | [commit] Xiangfu Liu: libgii, fix X_CFLAGS using HOST/usr/include folder http://qi-hw.com/p/openwrt-packages/b65a87c | 22:35 |
qi-bot | [commit] Xiangfu Liu: INSTALL_FGORTRAN needs those two options http://qi-hw.com/p/openwrt-xburst/9ddfc59 | 01:05 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: pmars: fix compile error, remove static CC ... in Makefile http://qi-hw.com/p/openwrt-packages/3259de0 | 01:32 |
qi-bot | [commit] Xiangfu Liu: mandoc, remove BROKEN, compile just fine http://qi-hw.com/p/openwrt-packages/deb6c2e | 01:32 |
qi-bot | [commit] Xiangfu Liu: robots: remove BROKEN, install to /usr/bin/ http://qi-hw.com/p/openwrt-packages/57b658a | 01:32 |
qi-bot | [commit] Xiangfu Liu: bwbasic, fix compile error, remove BROKEN http://qi-hw.com/p/openwrt-packages/1a1d25d | 01:32 |
qi-bot | [commit] Xiangfu Liu: libsdl-image, add -liconv to CONFIGURE_VARS http://qi-hw.com/p/openwrt-packages/3d0c2c5 | 08:54 |
qi-bot | [commit] Werner Almesberger: introduced 8_10-card.fpd as politically correct alias of usd-card.fpd http://qi-hw.com/p/kicad-libs/85fb77c | 10:22 |
qi-bot | [commit] Werner Almesberger: atusd.brd: rearranged component references and values for printing/display http://qi-hw.com/p/ben-wpan/6ac9168 | 10:28 |
qi-bot | [commit] Werner Almesberger: great atusd -> atben renaming: changed the directory name http://qi-hw.com/p/ben-wpan/3392647 | 10:28 |
qi-bot | [commit] Werner Almesberger: great atusd -> atben renaming: renamed design files and some references http://qi-hw.com/p/ben-wpan/319bd83 | 10:28 |
qi-bot | [commit] Werner Almesberger: removed atben/tools/ (functionality has moved to atrf-id long ago) http://qi-hw.com/p/ben-wpan/0dc344a | 10:28 |
qi-bot | [commit] Werner Almesberger: great atusd -> atben renaming: updated references in atben/cam/ http://qi-hw.com/p/ben-wpan/fb07d57 | 10:28 |
qi-bot | [commit] Werner Almesberger: great atusd -> atben renaming: changed "uSD" in project title to "8:10 card" http://qi-hw.com/p/ben-wpan/f7a8bbd | 10:28 |
qi-bot | [commit] Werner Almesberger: great atusd -> atben renaming: renamed tools/atusd.c and Makefile reference http://qi-hw.com/p/ben-wpan/32de4b6 | 10:28 |
qi-bot | [commit] Werner Almesberger: great atusd -> atben renaming: changed remaining references in tools/ http://qi-hw.com/p/ben-wpan/1cd079e | 10:28 |
qi-bot | [commit] Werner Almesberger: great atusd -> atben renaming: use 8_10-card.fpd instead of usd-card.fpd http://qi-hw.com/p/ben-wpan/5281f2c | 10:28 |
qi-bot | [commit] Werner Almesberger: great atusd -> atben renaming: update references in bom/ as well http://qi-hw.com/p/ben-wpan/98b4387 | 10:28 |
qi-bot | [commit] Werner Almesberger: use 8_10-card.fpd instead of usd-card.fpd http://qi-hw.com/p/ben-blinkenlights/9037090 | 10:47 |
qi-bot | [commit] Werner Almesberger: README: changed "uSD" to "8:10 card" http://qi-hw.com/p/ben-blinkenlights/d783951 | 10:47 |
qi-bot | [commit] Werner Almesberger: introduced 8_10-card.lib as politically correct alternative to usd-card.lib http://qi-hw.com/p/kicad-libs/b205efc | 15:39 |
qi-bot | [commit] Werner Almesberger: use 8_10-card.fpd instead of usd-card.fpd http://qi-hw.com/p/f32xbase/32946a5 | 15:45 |
qi-bot | [commit] Werner Almesberger: use 8_10-card.lib instead of usd-card.lib http://qi-hw.com/p/f32xbase/b6cfb82 | 15:45 |
qi-bot | [commit] Werner Almesberger: c2ben.sch: finally, rename the title as well http://qi-hw.com/p/f32xbase/d915463 | 15:45 |
qi-bot | [commit] Werner Almesberger: c2-ben.c: title comment still claimed the driver was for GTA01/02 http://qi-hw.com/p/f32xbase/a3a31f4 | 15:45 |
qi-bot | [commit] Werner Almesberger: now that all users of usd-card have been changed to 8_10-card, remove it http://qi-hw.com/p/kicad-libs/20a669c | 15:49 |
qi-bot | [commit] Werner Almesberger: 8_10-card.fpd: set pad type to "bare", so the we don't get solder paste on them http://qi-hw.com/p/kicad-libs/1a5a92e | 20:16 |
qi-bot | [commit] Werner Almesberger: pads.fpd: set pad type to "bare", so the we don't get solder paste on it http://qi-hw.com/p/kicad-libs/4dfabf5 | 20:21 |
qi-bot | [commit] Werner Almesberger: meander.fpd: use new pad type "trace" without solder paste and mask opening http://qi-hw.com/p/ben-wpan/c6532c7 | 20:42 |
qi-bot | [commit] Werner Almesberger: atben.brd: updated 8_10-card, to update pad type http://qi-hw.com/p/ben-wpan/d644642 | 20:42 |
qi-bot | [commit] Werner Almesberger: atben/atben.brd, atusb/atusb.brd: updated PAD_60x60 to update pad type http://qi-hw.com/p/ben-wpan/2c96bcb | 20:42 |
qi-bot | [commit] Werner Almesberger: atben/README: manufacturing notes http://qi-hw.com/p/ben-wpan/38fe798 | 20:42 |
qi-bot | [commit] Werner Almesberger: atusb/Makefile: replaced board name by $(NAME) or pattern http://qi-hw.com/p/ben-wpan/7d91ee6 | 20:42 |
qi-bot | [commit] Werner Almesberger: atusb.brd: removed unused Adhesive Front layer http://qi-hw.com/p/ben-wpan/af4ce1f | 20:42 |
qi-bot | [commit] Werner Almesberger: atben/Makefile (clean), atusb/Makefile (clean): remove Gerbers http://qi-hw.com/p/ben-wpan/478f600 | 20:42 |
qi-bot | [commit] Xiangfu Liu: new package: pyclock, python digital clock http://qi-hw.com/p/openwrt-packages/1e33f13 | 21:41 |
qi-bot | [commit] Xiangfu Liu: enable the toolchain option for Octave and libgfortran http://qi-hw.com/p/openwrt-xburst/68914e0 | 21:10 |
---|---|---|
qi-bot | [commit] Werner Almesberger: dirtly made the atrf tools run with the new atusd board http://qi-hw.com/p/ben-wpan/ebe6671 | 22:14 |
qi-bot | [commit] Werner Almesberger: atusd.brd: moved SLP_TR via a bit further from the chip http://qi-hw.com/p/ben-wpan/bf3189f | 22:14 |
qi-bot | [commit] Werner Almesberger: atusd.brd: re-layout to slightly reduce size, and added more text http://qi-hw.com/p/ben-wpan/62994da | 22:14 |
qi-bot | [commit] Xiangfu Liu: config.full_system-add-more-php5-modules.patch http://qi-hw.com/p/openwrt-xburst/15de829 | 22:25 |
qi-bot | [commit] Xiangfu Liu: config.full_system: add package sqlite2-cli http://qi-hw.com/p/openwrt-xburst/caf02b8 | 22:25 |
qi-bot | [commit] Xiangfu Liu: feeds.conf add @revision to feeds.conf http://qi-hw.com/p/openwrt-xburst/b2cc659 | 22:29 |
qi-bot | [commit] Xiangfu Liu: add the MAINTAINER to package http://qi-hw.com/p/openwrt-packages/40912c6 | 22:41 |
qi-bot | [commit] Joachim Steiger: v1.3 http://qi-hw.com/p/m1/43ec4d2 | 01:26 |
---|---|---|
qi-bot | [commit] Wolfgang Spraul: removed absolute path http://qi-hw.com/p/m1/8afc8d5 | 05:32 |
qi-bot | [commit] Wolfgang Spraul: convert dxf into svg instead of png http://qi-hw.com/p/m1/98f4ce1 | 07:45 |
qi-bot | [commit] David Kühling: added swig: Simplified Wrapper and Interface Generator (for host toolchain) http://qi-hw.com/p/openwrt-packages/a6e6dff | 10:28 |
qi-bot | [commit] David Kühling: plplot: make lua bindings work http://qi-hw.com/p/openwrt-packages/0f9e96c | 10:37 |
qi-bot | [commit] Werner Almesberger: atusd: use crystal instead of trying to obtain an external clock from the Ben http://qi-hw.com/p/ben-wpan/c0941db | 15:37 |
qi-bot | [commit] Werner Almesberger: atusd: added missing connection for SLP_TR http://qi-hw.com/p/ben-wpan/507bcaf | 15:37 |
qi-bot | [commit] kyak: Tile: count moves http://qi-hw.com/p/openwrt-packages/cccd60c | 16:16 |
qi-bot | [commit] kyak: qball: updated to 1.2, dropped merged patch http://qi-hw.com/p/openwrt-packages/c1fb2a3 | 16:46 |
qi-bot | [commit] kyak: qball: really drop the patch :) http://qi-hw.com/p/openwrt-packages/e78146d | 16:48 |
qi-bot | [commit] kyak: Tile: the 15 Puzzle game written in Qt4 http://qi-hw.com/p/openwrt-packages/bd53759 | 08:32 |
---|---|---|
qi-bot | [commit] kyak: Tile: check if the puzzle is solved http://qi-hw.com/p/openwrt-packages/ca4ebe4 | 11:26 |
qi-bot | [commit] kyak: Tile: small fix. http://qi-hw.com/p/openwrt-packages/e5d0837 | 14:24 |
qi-bot | [commit] Bas Wijnen: lists and bugfixes http://qi-hw.com/p/iris/f4cac9b | 20:11 |
qi-bot | [commit] Joachim Steiger: added cc icons, added copying, added shielding sheet, lots of details http://qi-hw.com/p/m1/985061d | 20:46 |
qi-bot | [commit] Joachim Steiger: really commit http://qi-hw.com/p/m1/febca89 | 20:46 |
qi-bot | [commit] Andres Calderon: kccomp.py has been fixed http://qi-hw.com/p/xue/61118e4 | 20:48 |
qi-bot | [commit] Joachim Steiger: v1.1 http://qi-hw.com/p/m1/d07923e | 23:50 |
qi-bot | [commit] Joachim Steiger: v1.2 http://qi-hw.com/p/m1/dabbae9 | 23:50 |
qi-bot | [commit] Xiangfu Liu: new package: offrss and some depends pakcages http://qi-hw.com/p/openwrt-packages/1c605fe | 01:53 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: new package: timidity, MIDI files player http://qi-hw.com/p/openwrt-packages/49ec918 | 01:56 |
qi-bot | [commit] Xiangfu Liu: fixed section display not correct in ben nanonote http://qi-hw.com/p/gmenu2x/91d3fea | 04:22 |
qi-bot | [commit] Xiangfu Liu: gmenu2x: update http://qi-hw.com/p/openwrt-packages/f07d355 | 04:33 |
qi-bot | [commit] Xiangfu Liu: gmenu2x: add a new theme http://qi-hw.com/p/openwrt-packages/9186e37 | 11:20 |
qi-bot | [commit] Wolfgang Spraul: added cad/Makefile to automate svg2pdf and dxf2png http://qi-hw.com/p/m1/72c2bda | 17:04 |
qi-bot | [commit] Wolfgang Spraul: added snippet about new metal sheet http://qi-hw.com/p/m1/26e2d32 | 09:24 |
---|---|---|
qi-bot | [commit] Joachim Steiger: added missing background image http://qi-hw.com/p/m1/5228a87 | 12:01 |
qi-bot | [commit] Joachim Steiger: Merge branch 'master' of git@projects.qi-hardware.com:m1 http://qi-hw.com/p/m1/a0552c4 | 12:01 |
qi-bot | [commit] Joachim Steiger: added more parts and material properties http://qi-hw.com/p/m1/9228004 | 12:16 |
qi-bot | [commit] Wolfgang Spraul: added some sourcing notes for case parts http://qi-hw.com/p/m1/d61c132 | 14:51 |
qi-bot | [commit] Werner Almesberger: atrf-txrx: new option -C to control CLKM output http://qi-hw.com/p/ben-wpan/cb7afe1 | 18:15 |
qi-bot | [commit] Werner Almesberger: atrf-txrx.c (enter_test_mode_231): disable CLKM in AT86RF231 test mode http://qi-hw.com/p/ben-wpan/e90c596 | 18:15 |
qi-bot | [commit] kyak: fbterm now builds against both tiny and gnu iconv http://qi-hw.com/p/openwrt-packages/8de229d | 09:04 |
---|---|---|
qi-bot | [commit] kyak: gcc-mips: copy missing files manually http://qi-hw.com/p/openwrt-packages/5282f81 | 10:31 |
qi-bot | [commit] Werner Almesberger: f32x/: renamed OpenWRT target from "ben" to "ben_openwrt" and added "ben_jlime" http://qi-hw.com/p/f32xbase/9019985 | 10:43 |
qi-bot | [commit] Werner Almesberger: tools/atrf-txrx/atrf-txrx.c (enter_test_mode_231): clean up and exit on error http://qi-hw.com/p/ben-wpan/110d5ab | 10:43 |
qi-bot | [commit] Xiangfu Liu: flite: include in upstream http://qi-hw.com/p/openwrt-packages/fe66b54 | 10:51 |
qi-bot | [commit] Xiangfu Liu: gmenu2x: add mediatomb icon http://qi-hw.com/p/openwrt-packages/75a5e5e | 10:51 |
qi-bot | [commit] Xiangfu Liu: hnb: add default .hnbrc, thanks to mark adrian bell http://qi-hw.com/p/openwrt-packages/8421020 | 10:51 |
qi-bot | [commit] Xiangfu Liu: dialog: remove it since it included by upstream feeds packages http://qi-hw.com/p/openwrt-packages/c269f76 | 11:53 |
qi-bot | [commit] Werner Almesberger: tools/lib/misctxrx.c (wait_for_interrupt): restore signal also after timeout http://qi-hw.com/p/ben-wpan/6ff235e | 11:54 |
qi-bot | [commit] Joachim Steiger: removed old files http://qi-hw.com/p/m1/17ab0e1 | 12:45 |
qi-bot | [commit] Joachim Steiger: added 27c3 release of case http://qi-hw.com/p/m1/3b3095f | 12:47 |
qi-bot | [commit] David Kühling: gnuplot-gfx: reworked truecolor fixes to upstream-submittable http://qi-hw.com/p/openwrt-packages/52ae1d7 | 06:09 |
---|---|---|
qi-bot | [commit] David Kühling: gnuplot-gfx: update to latest upstream version 4.4.2 http://qi-hw.com/p/openwrt-packages/c20e4cd | 06:09 |
qi-bot | [commit] David Kühling: use ccache also for C++ compilation http://qi-hw.com/p/openwrt-xburst/fba4b71 | 06:31 |
qi-bot | [commit] David Kühling: gnuplot-gfx: cleanup patches for 4.4.2 version http://qi-hw.com/p/openwrt-packages/2343639 | 08:47 |
qi-bot | [commit] David Kühling: plplot: adapt font size scaling to smaller nanonote display http://qi-hw.com/p/openwrt-packages/a05abc9 | 08:47 |
qi-bot | [commit] Werner Almesberger: atusd/Makefile: added targets "front", "back", "clean" http://qi-hw.com/p/ben-wpan/88b742b | 17:40 |
qi-bot | [commit] Werner Almesberger: atusb/Makefile: removed claim that zones have to be filled in the .brd file http://qi-hw.com/p/ben-wpan/766b575 | 17:40 |
qi-bot | [commit] Werner Almesberger: atusd/Makefile: replaced board name by $(NAME) or pattern http://qi-hw.com/p/ben-wpan/cb2a30a | 17:40 |
qi-bot | [commit] Werner Almesberger: atusd/Makefile: remove long-obsolete dependency on dtc123je.mod http://qi-hw.com/p/ben-wpan/ff6703f | 17:40 |
qi-bot | [commit] Werner Almesberger: atrf-rssi.c: unmask IRQ_PLL_LOCK, for 231 compatibility http://qi-hw.com/p/ben-wpan/4d2395e | 17:40 |
qi-bot | [commit] Werner Almesberger: tools/: renamed OpenWRT target from "ben" to "ben_openwrt" and added "ben_jlime" http://qi-hw.com/p/ben-wpan/45e55fe | 17:40 |
qi-bot | [commit] Werner Almesberger: atusd/cam/mkmk: updated for making the 20110104 prototypes http://qi-hw.com/p/ben-wpan/e8d7150 | 17:40 |
qi-bot | [commit] Werner Almesberger: atrf-txrx: updated for AT86RF231 interrupt handling http://qi-hw.com/p/ben-wpan/0c7146c | 17:40 |
qi-bot | [commit] Werner Almesberger: tools/lib/misctxrx.c: decode AMI and CCA_ED_DONE interrupts (231 only) http://qi-hw.com/p/ben-wpan/1befc69 | 17:40 |
qi-bot | [commit] Werner Almesberger: atrf-txrx: small 231 continuous transmission mode cleanup (doesn't work yet) http://qi-hw.com/p/ben-wpan/9b498ae | 18:40 |
qi-bot | [commit] Werner Almesberger: atusd: removed resistor of futility http://qi-hw.com/p/ben-wpan/8d48773 | 18:40 |
qi-bot | [commit] David Kühling: plplot: package svgalib driver and demo programs http://qi-hw.com/p/openwrt-packages/55a6dd5 | 06:03 |
---|---|---|
qi-bot | [commit] David Kühling: gnuplot-gfx: fixed VGA color palette (grey lines need to be brighter) http://qi-hw.com/p/openwrt-packages/72e12d0 | 06:39 |
qi-bot | [commit] kyak: mplayer builds smartly depending on PATENTED flag http://qi-hw.com/p/openwrt-packages/adf4c0e | 08:18 |
qi-bot | [commit] David Kühling: octave: put liboctave into /usr/lib; fix (most) timestamp warnings http://qi-hw.com/p/openwrt-packages/e7a8a44 | 10:50 |
qi-bot | [commit] David Kühling: plplot: make svgalib based video mode work somewhat. http://qi-hw.com/p/openwrt-packages/e188763 | 10:50 |
qi-bot | [commit] David Kühling: plplot: fix/reimplement color setting in linuxvga driver http://qi-hw.com/p/openwrt-packages/9f87552 | 10:50 |
qi-bot | [commit] David Kühling: octave: use plplot as plotting driver, if available http://qi-hw.com/p/openwrt-packages/cf3da20 | 10:50 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: cleanup http://qi-hw.com/p/ben-gps-sdr/b48d9a9 | 19:09 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: 2k buffer for now http://qi-hw.com/p/ben-gps-sdr/a7c1c93 | 19:09 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: Comand line basic support, FPGA map is now wider http://qi-hw.com/p/ben-gps-sdr/a4cacdf | 19:09 |
qi-bot | [commit] kyak: qstardict: fixed missing dependencies http://qi-hw.com/p/openwrt-packages/0f82e42 | 03:27 |
---|---|---|
qi-bot | [commit] kyak: put qi openwrt-packages git on top in feed.conf http://qi-hw.com/p/openwrt-xburst/46b0442 | 03:57 |
qi-bot | [commit] kyak: Merge branch 'master' of projects.qi-hardware.com:openwrt-xburst http://qi-hw.com/p/openwrt-xburst/ba54599 | 03:57 |
qi-bot | [commit] kyak: use full versions of libiconv, gettext; fix glib2 http://qi-hw.com/p/openwrt-packages/f981e83 | 04:02 |
qi-bot | [commit] Werner Almesberger: atusb/fw/include/at86rf230.h: started updates for AT86RF231 http://qi-hw.com/p/ben-wpan/337e5d2 | 13:02 |
qi-bot | [commit] Werner Almesberger: atusb/fw/include/at86rf230.h: make one section per register, not one per field http://qi-hw.com/p/ben-wpan/bd5b008 | 13:02 |
qi-bot | [commit] Werner Almesberger: atusb/fw/include/at86rf230.h: added remaining AT86RF231 values http://qi-hw.com/p/ben-wpan/4387d84 | 13:02 |
qi-bot | [commit] Werner Almesberger: atusd/cam/Makefile: updated for cameo-based process (forgot to commit this) http://qi-hw.com/p/ben-wpan/4ef7a82 | 13:02 |
qi-bot | [commit] Werner Almesberger: libatrf: new function atrf_identify to identify the chip http://qi-hw.com/p/ben-wpan/a9321ce | 13:02 |
qi-bot | [commit] Werner Almesberger: atrf-txrx: set CRC and transmit power depending on chip (AT86RF230/231) http://qi-hw.com/p/ben-wpan/02e394a | 13:02 |
qi-bot | [commit] Werner Almesberger: atusb/fw/include/at86rf230.h: many corrections, some additions http://qi-hw.com/p/ben-wpan/f67a79b | 13:02 |
qi-bot | [commit] Werner Almesberger: atusb/fw/include/at86rf230.h: make 231-centric http://qi-hw.com/p/ben-wpan/309a5ed | 13:02 |
qi-bot | [commit] Werner Almesberger: atrf-txrx: added support for AT86RF231 continuous transmission mode http://qi-hw.com/p/ben-wpan/b2d90cd | 13:02 |
qi-bot | [commit] kyak: ash --login as login shell in fbterm (in gmenu2x) http://qi-hw.com/p/openwrt-packages/e7e18ea | 18:41 |
qi-bot | [commit] kyak: small optimization when starting ben-ash-rus http://qi-hw.com/p/openwrt-packages/a1c1ed3 | 18:41 |
qi-bot | [commit] Xiangfu Liu: gmu: update to 0.7.2, it's need lib speedx http://qi-hw.com/p/openwrt-packages/7fbb60a | 00:51 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: new package: flite, a small, fast run-time synthesis engine http://qi-hw.com/p/openwrt-packages/cd33c1c | 02:56 |
qi-bot | [commit] Xiangfu Liu: ikog.py: using UNPACK_CMD instead of download everytime compile http://qi-hw.com/p/openwrt-packages/f93258c | 03:50 |
qi-bot | [commit] Xiangfu Liu: new package: offlineimap, Read/sync your IMAP mailboxes [Python] http://qi-hw.com/p/openwrt-packages/3fb4302 | 05:03 |
qi-bot | [commit] David Kühling: Port of SVGAlib; patched to only use the linux frame buffer http://qi-hw.com/p/openwrt-packages/ac7a991 | 08:43 |
qi-bot | [commit] Xiangfu Liu: gmu: fix DEPENDS http://qi-hw.com/p/openwrt-packages/437e156 | 10:10 |
qi-bot | [commit] David Kühling: gnuplot-gfx: a graphical gnuplot that uses truecolor libvga graphics http://qi-hw.com/p/openwrt-packages/7336686 | 11:18 |
qi-bot | [commit] Xiangfu Liu: config.full_system, add math stuff and some new pakcages http://qi-hw.com/p/openwrt-xburst/ca0b6e7 | 23:14 |
qi-bot | [commit] Xiangfu Liu: configu.full_system: remove IB and Toolchain http://qi-hw.com/p/openwrt-xburst/e26ce43 | 03:31 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: using 'strip' instead of 'sstrip' http://qi-hw.com/p/openwrt-xburst/257e48a | 03:31 |
qi-bot | [commit] Xiangfu Liu: new pakcage: mediatomb, open source UPnP MediaServer http://qi-hw.com/p/openwrt-packages/47496a7 | 06:07 |
qi-bot | [commit] David Kühling: gnuplot: fix ggi terminal video mode detection http://qi-hw.com/p/openwrt-packages/21acf8e | 07:32 |
qi-bot | [commit] David Kühling: gnuplot: Build and package help files for internal documentation system http://qi-hw.com/p/openwrt-packages/59ad4ea | 07:32 |
qi-bot | [commit] David Kühling: gnuplot-ggi: build without mouse support so we can leave plots via keypress http://qi-hw.com/p/openwrt-packages/8a1f0d4 | 07:46 |
qi-bot | [commit] Xiangfu Liu: using STDOUT_FILENO, remove tcsetpgrp http://qi-hw.com/p/gmenu2x/bfe772b | 09:12 |
qi-bot | [commit] Xiangfu Liu: tunec: remove @BROKEN, fftw3 fixed in upstream r24169 http://qi-hw.com/p/openwrt-packages/48e266a | 09:27 |
qi-bot | [commit] Xiangfu Liu: gmenu2x: update http://qi-hw.com/p/openwrt-packages/134dbbb | 09:27 |
qi-bot | [commit] Lars-Peter Clausen: Add gpio chager driver http://qi-hw.com/p/qi-kernel/77c61e9 | 19:59 |
qi-bot | [commit] Lars-Peter Clausen: MIPS: JZ4740: qi_lb60: Add gpio-charger device http://qi-hw.com/p/qi-kernel/49b2a95 | 19:59 |
qi-bot | [commit] Lars-Peter Clausen: Add n516 board support http://qi-hw.com/p/qi-kernel/d022d3f | 19:59 |
qi-bot | [commit] Lars-Peter Clausen: Add n526 board support http://qi-hw.com/p/qi-kernel/a8cc3ae | 19:59 |
qi-bot | [commit] Lars-Peter Clausen: Add N516 sound SoC board driver http://qi-hw.com/p/qi-kernel/8ed0276 | 19:59 |
qi-bot | [commit] Lars-Peter Clausen: Add N526 sound SoC board driver http://qi-hw.com/p/qi-kernel/04bfa7b | 19:59 |
qi-bot | [commit] Lars-Peter Clausen: i2c: Add i2c driver for JZ47XX SoCs http://qi-hw.com/p/qi-kernel/8f1beb3 | 19:59 |
qi-bot | [commit] Lars-Peter Clausen: MIPS: JZ4740: Fix i2c driver name. http://qi-hw.com/p/qi-kernel/302b0ba | 19:59 |
qi-bot | [commit] Lars-Peter Clausen: MIPS: JZ4740: Add id800wt board http://qi-hw.com/p/qi-kernel/02f99c3 | 19:59 |
qi-bot | [commit] Lars-Peter Clausen: MFD: jz4740-adc: Add support for the touchscreen part of the adc unit http://qi-hw.com/p/qi-kernel/db0d9c6 | 19:59 |
qi-bot | [commit] Lars-Peter Clausen: input: Add touchscreen driver for the JZ4740 SoC http://qi-hw.com/p/qi-kernel/dc7f0a5 | 19:59 |
qi-bot | [commit] Lars-Peter Clausen: Add defconfig http://qi-hw.com/p/qi-kernel/a7f059a | 19:59 |
qi-bot | [commit] Lars-Peter Clausen: Framebuffer notifier: Call notifier callbacks prior to blanking the screen http://qi-hw.com/p/qi-kernel/a7ce781 | 19:59 |
qi-bot | [commit] Lars-Peter Clausen: qi_lb60: Don't use 3-wire spi mode for the display for now http://qi-hw.com/p/qi-kernel/d39fdfb | 20:00 |
qi-bot | [commit] Lars-Peter Clausen: POWER: jz4740-battery: Protect against concurrent battery readings http://qi-hw.com/p/qi-kernel/bb050fc | 20:00 |
qi-bot | [commit] Lars-Peter Clausen: POWER: jz4740-battery: Check if platform_data is supplied http://qi-hw.com/p/qi-kernel/c69da02 | 20:00 |
qi-bot | [commit] Lars-Peter Clausen: MTD: NAND: jz4740: Make 'struct platform_driver jz_nand_driver' static http://qi-hw.com/p/qi-kernel/bbc3974 | 20:00 |
qi-bot | [commit] Lars-Peter Clausen: MTD: NAND: jz4740: Remove custom {read,write}_page handlers http://qi-hw.com/p/qi-kernel/1c39092 | 20:00 |
qi-bot | [commit] Lars-Peter Clausen: MIPS: JZ4740: Set nand ecc offsets for the qi_lb60 board http://qi-hw.com/p/qi-kernel/1bba17a | 20:00 |
qi-bot | [commit] Lars-Peter Clausen: mfd: Convert jz4740-adc to new irq_ methods http://qi-hw.com/p/qi-kernel/b77ba0c | 20:00 |
qi-bot | [commit] Werner Almesberger: cameo: array steps can now be specifed as item size plus border http://qi-hw.com/p/cae-tools/ee3a3e6 | 21:15 |
qi-bot | [commit] Werner Almesberger: cameo/path.c (path_connect): corrected logic when merging B->A http://qi-hw.com/p/cae-tools/4b717ca | 21:15 |
qi-bot | [commit] Werner Almesberger: atusd.brd: removed short edge segment left under larger segment http://qi-hw.com/p/ben-wpan/e2c5d42 | 21:15 |
qi-bot | [commit] Werner Almesberger: atusd/cam: updated to use cameo http://qi-hw.com/p/ben-wpan/6ccb252 | 21:15 |
qi-bot | [commit] Werner Almesberger: bom/Makefile: invoke eeschema to generate the BOM, some cleanup http://qi-hw.com/p/ben-wpan/6698174 | 01:23 |
---|---|---|
qi-bot | [commit] Werner Almesberger: BOM update for atusb http://qi-hw.com/p/ben-wpan/ed20053 | 01:23 |
qi-bot | [commit] Werner Almesberger: usrp/plscan: comment out yrange (the experiments now cover all sorts of ranges) http://qi-hw.com/p/ben-wpan/9c2f37b | 01:23 |
qi-bot | [commit] Werner Almesberger: atusb/cam/mkmk: update for on-going work; showcase use of "rotate" http://qi-hw.com/p/ben-wpan/155dfba | 01:23 |
qi-bot | [commit] Werner Almesberger: Added the AT86RF231 to the bookshelf and the BOM resources http://qi-hw.com/p/ben-wpan/66f5fff | 01:23 |
qi-bot | [commit] Werner Almesberger: Added AT86RF231 schematics symbol http://qi-hw.com/p/ben-wpan/56b93a1 | 01:23 |
qi-bot | [commit] Werner Almesberger: atusb: switched from the AT86RF230 to the AT86RF231, added missing RF ground http://qi-hw.com/p/ben-wpan/9f8a77e | 01:23 |
qi-bot | [commit] Werner Almesberger: atusd: switched schematics from the AT86RF230 to the AT86RF231 http://qi-hw.com/p/ben-wpan/6ee7611 | 01:23 |
qi-bot | [commit] Werner Almesberger: atusb/atrf.sch: defined footprint of B1 (0805-6) http://qi-hw.com/p/ben-wpan/b44e731 | 01:23 |
qi-bot | [commit] Werner Almesberger: atusd: switched to Johanson 2450FB15L0001 balun http://qi-hw.com/p/ben-wpan/3ea0199 | 01:23 |
qi-bot | [commit] Werner Almesberger: atusd.sch (C1, C2, C9): added "/RF" to make BOOM select UHI Q type http://qi-hw.com/p/ben-wpan/7d75642 | 01:23 |
qi-bot | [commit] Werner Almesberger: atusd.brd: updated U1, added C9, and rearranged things for XTAL1/2 swap http://qi-hw.com/p/ben-wpan/47236cb | 01:23 |
qi-bot | [commit] Werner Almesberger: atusd.brd: use 110% antenna; better follow 8:10 card shape http://qi-hw.com/p/ben-wpan/7b10db1 | 01:23 |
qi-bot | [commit] Werner Almesberger: atusd.brd: removed layer alignment targets (they confuse cameo) http://qi-hw.com/p/ben-wpan/d833b50 | 01:23 |
qi-bot | [commit] bartbes: nlove merged in changes from love 0.7.0 http://qi-hw.com/p/openwrt-packages/54e3ee0 | 07:48 |
qi-bot | [commit] Wolfgang Spraul: added kicad-patches/TODO http://qi-hw.com/p/eda-tools/ca29362 | 11:21 |
qi-bot | [commit] David Kühling: plplot: many fixes, separate packages for qt,tcl,octave,c++ interfaces http://qi-hw.com/p/openwrt-packages/fa537a3 | 12:32 |
qi-bot | [commit] David Kühling: libgii: initial commit http://qi-hw.com/p/openwrt-packages/0c9d588 | 15:00 |
qi-bot | [commit] David Kühling: libggi port http://qi-hw.com/p/openwrt-packages/a7636d8 | 15:00 |
qi-bot | [commit] David Kühling: libgii: include all the drivers in ipk package and staging dir http://qi-hw.com/p/openwrt-packages/a862cbe | 15:00 |
qi-bot | [commit] David Kühling: libggi: package demo/test programs http://qi-hw.com/p/openwrt-packages/415b1dd | 15:00 |
qi-bot | [commit] Werner Almesberger: usd-card.fpd: added distance of contacts base line from card edge http://qi-hw.com/p/kicad-libs/3d88299 | 15:28 |
qi-bot | [commit] Werner Almesberger: atusd.brd: increased via density in RF areas http://qi-hw.com/p/ben-wpan/475baa1 | 15:28 |
qi-bot | [commit] David Kühling: gnuplot-ggi: A version of gnuplot that draws to the framebuffer via libggi http://qi-hw.com/p/openwrt-packages/fba3cca | 15:57 |
qi-bot | [commit] Wolfgang Spraul: fixed path in Makefile http://qi-hw.com/p/m1/05e9a31 | 03:04 |
---|---|---|
qi-bot | [commit] David Kühling: octave: install Octave development libs&scripts to staging_dir http://qi-hw.com/p/openwrt-packages/244c849 | 16:11 |
qi-bot | [commit] David Kühling: Port of plplot: a plotting library supporting most scripting languages http://qi-hw.com/p/openwrt-packages/0a1980c | 16:11 |
qi-bot | [commit] Werner Almesberger: bbl.c (main): open /dev/mem with O_SYNC to disable caching http://qi-hw.com/p/ben-blinkenlights/76c0616 | 16:35 |
qi-bot | [commit] Werner Almesberger: f32x: open /dev/mem with O_SYNC to disable caching http://qi-hw.com/p/f32xbase/6dbd844 | 16:35 |
qi-bot | [commit] Werner Almesberger: libbb/libbbd.c (main): open /dev/mem with O_SYNC to disable caching http://qi-hw.com/p/wernermisc/4a04cdc | 16:54 |
qi-bot | [commit] Werner Almesberger: atusb/cam: it's obsolete now - removed http://qi-hw.com/p/ben-wpan/2ac2420 | 16:55 |
qi-bot | [commit] Werner Almesberger: atusb/cam2: renamed to atusb/cam http://qi-hw.com/p/ben-wpan/59ae88d | 16:55 |
qi-bot | [commit] Werner Almesberger: atusb/usb.sch: typo in VR1 footprint, should be 0402 instead of 0403 http://qi-hw.com/p/ben-wpan/04d3cec | 16:55 |
qi-bot | [commit] Werner Almesberger: atusb/usb.sch: typo: the LED is called LTST-C190KRKT, not LTST-C190KTKR http://qi-hw.com/p/ben-wpan/882558b | 16:55 |
qi-bot | [commit] Werner Almesberger: atusb/usb.sch: specified capacitance of TVSs (33 pF) and explained why http://qi-hw.com/p/ben-wpan/08eec5b | 16:55 |
qi-bot | [commit] Werner Almesberger: atusb/atrf.sch: changed C3, C8, C9 to "22pF/RF", to make BOOM select UHI Q type http://qi-hw.com/p/ben-wpan/9851e3c | 16:55 |
qi-bot | [commit] Werner Almesberger: tools/lib/atusd.c (atusd_open): open /dev/mem with O_SYNC to disable caching http://qi-hw.com/p/ben-wpan/f26d735 | 16:55 |
qi-bot | [commit] David Kühling: add workaround for org-mode problem (todo: need a cleaner fix...) http://qi-hw.com/p/openwrt-packages/297b631 | 07:58 |
---|---|---|
qi-bot | [commit] David Kühling: New OpenWrt package for GNU Octave. Experimental/probably still broken. http://qi-hw.com/p/openwrt-packages/9aaeb46 | 09:23 |
qi-bot | [commit] David Kühling: Add gfortran compiler support to the toolchain http://qi-hw.com/p/openwrt-xburst/6efd70c | 10:25 |
qi-bot | [commit] David Kühling: octave: add dependency to fortran runtime lib http://qi-hw.com/p/openwrt-packages/e013ed5 | 10:54 |
qi-bot | [commit] David Kühling: octave: fix pager flags to work with busybox'es less http://qi-hw.com/p/openwrt-packages/5d05b1a | 10:54 |
qi-bot | [commit] Wolfgang Spraul: updated gitsch2ps to new eeschema --plot syntax http://qi-hw.com/p/eda-tools/0f4e2be | 12:59 |
qi-bot | [commit] Wolfgang Spraul: fixed stdout/stderr and exit code, removed old eeschema --plot http://qi-hw.com/p/eda-tools/7f9de6f | 12:59 |
qi-bot | [commit] David Kühling: octave: fix various shared library rpath problems http://qi-hw.com/p/openwrt-packages/880bca2 | 14:16 |
qi-bot | [commit] Werner Almesberger: atusb.brd: increased RF ground zone http://qi-hw.com/p/ben-wpan/fd76be6 | 16:05 |
qi-bot | [commit] Werner Almesberger: Removed drl2gp - it's been merged into cameo. http://qi-hw.com/p/cae-tools/45ee739 | 23:41 |
qi-bot | [commit] Werner Almesberger: cameo: added "rotate" command http://qi-hw.com/p/cae-tools/6f30bab | 23:41 |
qi-bot | [commit] Andres Calderon: power jack has been added http://qi-hw.com/p/xue/eea70b2 | 10:38 |
---|---|---|
qi-bot | [commit] Wolfgang Spraul: add more eeschema cmdline options --erc --netlist --plotx --list-sheets http://qi-hw.com/p/eda-tools/c11feca | 14:41 |
qi-bot | [commit] Wolfgang Spraul: broke scripted.patch into scripted-new.patch and scripted.patch for easier maintenance http://qi-hw.com/p/eda-tools/9b476d4 | 15:48 |
qi-bot | [commit] Wolfgang Spraul: more patch restructuring for easier maintenance and upstream http://qi-hw.com/p/eda-tools/b29edbb | 15:54 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: Missing data and sync inputs http://qi-hw.com/p/ben-gps-sdr/a64fd8c | 20:38 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: ring buffer implemted (test in progress) http://qi-hw.com/p/ben-gps-sdr/01a6397 | 20:38 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: some basics utils to dump raw data to a file (work in progress) http://qi-hw.com/p/ben-gps-sdr/2f5e6fe | 20:38 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: remove code that not belong to this core http://qi-hw.com/p/ben-gps-sdr/b48dfe9 | 21:31 |
qi-bot | [commit] Werner Almesberger: atusb/cam2/mkmk: double backslash to put into generated makefile http://qi-hw.com/p/ben-wpan/6f95629 | 00:10 |
---|---|---|
qi-bot | [commit] Werner Almesberger: atusb.brd: more layout cleanup to improve solderability http://qi-hw.com/p/ben-wpan/cec090f | 00:10 |
qi-bot | [commit] Werner Almesberger: atusb.brd: reduced XTAL front ground to shorted "tongue" between pads 24 and 25 http://qi-hw.com/p/ben-wpan/f33b86b | 00:10 |
qi-bot | [commit] Werner Almesberger: atusb/fw/atusb/Makefile: pass board version to cpp (when determining USB ID) http://qi-hw.com/p/ben-wpan/6a7b2de | 00:10 |
qi-bot | [commit] Werner Almesberger: atusb.brd: moved via and bumped version number http://qi-hw.com/p/ben-wpan/478bfb5 | 00:10 |
qi-bot | [commit] Andres Calderon: PJ-CUI-TH.mod footprint added http://qi-hw.com/p/xue/2381267 | 23:05 |
qi-bot | [commit] Werner Almesberger: atusb.brd: increased zone clearance from 8 mil to 10 mil, for solderability http://qi-hw.com/p/ben-wpan/ed591cf | 01:35 |
---|---|---|
qi-bot | [commit] Werner Almesberger: atusb.brd: added via from nRST/C2CK, to allow for addition of pull-up http://qi-hw.com/p/ben-wpan/7514fa8 | 01:35 |
qi-bot | [commit] Xiangfu Liu: gmenu2x: add --login to ash and bash http://qi-hw.com/p/openwrt-packages/0529b7d | 05:39 |
qi-bot | [commit] Andres Calderon: bq24070 added to BOOKSHELF http://qi-hw.com/p/xue/064b398 | 13:41 |
qi-bot | [commit] Andres Calderon: partial psu placement http://qi-hw.com/p/xue/b181d9d | 13:41 |
qi-bot | [commit] Wolfgang Spraul: added pcbnew --fill-all-zones, stricter option semantics http://qi-hw.com/p/eda-tools/dd9db75 | 05:42 |
---|---|---|
qi-bot | [commit] Werner Almesberger: kicad-patches: completed and extended build instructions http://qi-hw.com/p/eda-tools/d280eab | 10:50 |
qi-bot | [commit] Werner Almesberger: atusb/Makefile: move common plot command parts to variable $(PLOT_BRD) http://qi-hw.com/p/ben-wpan/aae86ca | 11:06 |
qi-bot | [commit] Werner Almesberger: atusb/Makefile: add --fill-all-zones to PLOT_BRD, to make sure zones are filled http://qi-hw.com/p/ben-wpan/228eb20 | 11:06 |
qi-bot | [commit] Andres Calderon: BQ2407[0,1] component has been added http://qi-hw.com/p/xue/f66a31c | 11:25 |
qi-bot | [commit] Andres Calderon: schematic battery charger draft http://qi-hw.com/p/xue/d81ffca | 12:04 |
qi-bot | [commit] Andres Calderon: PVQFN-N20 footprint component added http://qi-hw.com/p/xue/9a49522 | 18:02 |
qi-bot | [commit] Andres Calderon: IC charger inserted in the PCB http://qi-hw.com/p/xue/6cf11e5 | 18:16 |
qi-bot | [commit] Xiangfu Liu: gmenu2x files: add emacs icon http://qi-hw.com/p/openwrt-packages/c0002c5 | 01:47 |
---|---|---|
qi-bot | [commit] Werner Almesberger: Patches to enhance KiCad, mainly for non-interactive use http://qi-hw.com/p/eda-tools/d2da52b | 21:05 |
qi-bot | [commit] Werner Almesberger: atusb.brd: saving with the zones filled, to avoid surprises http://qi-hw.com/p/ben-wpan/5dde617 | 22:30 |
qi-bot | [commit] Werner Almesberger: atusb/Makefile: targets "front" and "back" to print layers for toner transfer http://qi-hw.com/p/ben-wpan/fe60705 | 22:30 |
qi-bot | [commit] Werner Almesberger: atusb/cam2/: streamlined CAM data processing, added generation of prerequisites http://qi-hw.com/p/ben-wpan/a0b064b | 22:30 |
qi-bot | [commit] Werner Almesberger: atusb: added "clean" targets to main and CAM makefile http://qi-hw.com/p/ben-wpan/3385afc | 22:30 |
qi-bot | [commit] David Kühling: Fix problems with missing tty for launched applications http://qi-hw.com/p/gmenu2x/dd0709e | 11:58 |
---|---|---|
qi-bot | [commit] Andres Calderon: some footprints has been assigned http://qi-hw.com/p/xue/ff84a19 | 19:08 |
qi-bot | [commit] Andres Calderon: mdc rule added to modules makefile http://qi-hw.com/p/xue/8f5c2e3 | 19:08 |
qi-bot | [commit] Andres Calderon: new psu components in the pcb... placement pendent http://qi-hw.com/p/xue/e1d2dfa | 19:16 |
qi-bot | [commit] Andres Calderon: cleanup http://qi-hw.com/p/xue/3ca941d | 19:17 |
qi-bot | [commit] Wolfgang Spraul: added more spartan-6 documents to BOOKSHELF http://qi-hw.com/p/xue/394274a | 10:52 |
---|---|---|
qi-bot | [commit] Andres Calderon: some PSU passive components values has been selected http://qi-hw.com/p/xue/a77e91e | 13:04 |
qi-bot | [commit] Xiangfu Liu: nanonote-example-files: add track info to music file http://qi-hw.com/p/openwrt-packages/83b8728 | 23:20 |
qi-bot | [commit] Xiangfu Liu: update debian/changelog http://qi-hw.com/p/xburst-tools/2319c77 | 01:04 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: update ChangeLog http://qi-hw.com/p/xburst-tools/0fc6972 | 01:04 |
qi-bot | [commit] Adam Wang: ignore $savepcb.000 and $savepcb.brd http://qi-hw.com/p/mmone-jtag-serial-cable/b6624a1 | 02:34 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: Copy data to memory if sync register is set to high (work in progress) http://qi-hw.com/p/ben-gps-sdr/1685166 | 22:44 |
qi-bot | [commit] Xiangfu Liu: cleanup code style http://qi-hw.com/p/xburst-tools/24aa5a2 | 05:24 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: xburst_stage2: don't skip bad block when nand erase http://qi-hw.com/p/xburst-tools/6b3f14b | 06:12 |
qi-bot | [commit] Xiangfu Liu: xburst_stage2: don't skip bad block when nand erase http://qi-hw.com/p/xburst-tools/0e92eb8 | 06:41 |
qi-bot | [commit] Xiangfu Liu: update version to 201012 http://qi-hw.com/p/xburst-tools/8ad5b58 | 08:34 |
qi-bot | [commit] Andres Calderon: 5V Boost for the USB Host has been selected http://qi-hw.com/p/xue/360398e | 08:45 |
qi-bot | [commit] Andres Calderon: fped footprints added http://qi-hw.com/p/xue/e823630 | 12:47 |
qi-bot | [commit] Andres Calderon: minor fix http://qi-hw.com/p/xue/786284f | 16:13 |
qi-bot | [commit] Andres Calderon: cleanup http://qi-hw.com/p/xue/6a075dd | 16:13 |
qi-bot | [commit] Werner Almesberger: f10/: seasonal fun project - distribute current to ten ignitors (2 x 22 R) http://qi-hw.com/p/wernermisc/3427d69 | 16:17 |
qi-bot | [commit] Andres Calderon: xue-rnc.cmp file has been restored http://qi-hw.com/p/xue/695a7ab | 17:42 |
qi-bot | [commit] Andres Calderon: new PSU draft design http://qi-hw.com/p/xue/851da63 | 21:50 |
qi-bot | [commit] Adam Wang: ignore usb_jtagFront.pos and usb_jtagBack.pos http://qi-hw.com/p/mmone-jtag-serial-cable/3f40a57 | 03:01 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: config.all_packages: remove mp3, mp4, rootfs, u-boot http://qi-hw.com/p/openwrt-xburst/cc29d05 | 08:45 |
qi-bot | [commit] Andres Calderon: Xue's PSU DC-DC ICs components has been selected http://qi-hw.com/p/xue/87d4d7e | 20:45 |
qi-bot | [commit] Andres Calderon: Xue's PSU DC-DC ICs components has been selected http://qi-hw.com/p/xue/39cdcec | 20:48 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: Cleaning up no needed code, and adding new place for tmp stuff http://qi-hw.com/p/ben-gps-sdr/1ab9cf3 | 22:57 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: Acquisition now works, 8 bits data 1 HIGH LSB bit for sync http://qi-hw.com/p/ben-gps-sdr/bb1b7be | 23:16 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: Acquisition module spi to parallel synced out http://qi-hw.com/p/ben-gps-sdr/795a67a | 23:16 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: Read only ram interface for SIE Xbust <-> FPGA Bus http://qi-hw.com/p/ben-gps-sdr/53f04de | 23:16 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: SiGE to SIE Data acquisition module, Work in progress http://qi-hw.com/p/ben-gps-sdr/d7a5e36 | 23:47 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: Small fix (duplicate wires and regs) detected on synthesis http://qi-hw.com/p/ben-gps-sdr/dacd086 | 23:54 |
qi-bot | [commit] Xiangfu Liu: mv byobu, nanoterm to terminal sectionadd ctronome, emacs, netsurf http://qi-hw.com/p/openwrt-packages/34b0b0c | 03:27 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: rename terminal to terminals http://qi-hw.com/p/openwrt-packages/ae795f0 | 03:27 |
qi-bot | [commit] Xiangfu Liu: gnuchess: change the install dir to /usr/bin http://qi-hw.com/p/openwrt-packages/1e030c2 | 03:27 |
qi-bot | [commit] Xiangfu Liu: NanoMap: display userage when start http://qi-hw.com/p/openwrt-packages/79a63f3 | 03:27 |
qi-bot | [commit] Xiangfu Liu: gmenu2x: add ikog, remove primes. http://qi-hw.com/p/openwrt-packages/c9e5d61 | 03:59 |
qi-bot | [commit] Andres Calderon: removed AVR and unavailable PSU components http://qi-hw.com/p/xue/4df5db0 | 17:02 |
qi-bot | [commit] Andres Calderon: cleanup http://qi-hw.com/p/xue/b0c94d8 | 17:25 |
qi-bot | [commit] Xiangfu Liu: update package to known-good revisions, thanks David Kuehling http://qi-hw.com/p/openwrt-xburst/692c1e4 | 23:23 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: update package to known-good revisions, thanks David Kuehling http://qi-hw.com/p/openwrt-xburst/971a8a2 | 23:31 |
qi-bot | [commit] Adam Wang: Updated BOOKSHELF http://qi-hw.com/p/mmone-jtag-serial-cable/f63c971 | 00:17 |
---|---|---|
qi-bot | [commit] David Kühling: make Emacs' dired work http://qi-hw.com/p/openwrt-packages/73f3a07 | 05:11 |
qi-bot | [commit] David Kühling: Disable Emacs build/startup hacks, rename package emacs-bin to emacs. http://qi-hw.com/p/openwrt-packages/5b037ba | 05:11 |
qi-bot | [commit] David Kühling: Fix Emacs bug resetting all environment variables on startup. http://qi-hw.com/p/openwrt-packages/f206348 | 05:11 |
qi-bot | [commit] David Kühling: renamed loadup patch (now using quilt); minor startup time improvement. http://qi-hw.com/p/openwrt-packages/617083b | 05:11 |
qi-bot | [commit] David Kühling: OpenWrt does not allow us to install to target '/var' directory. skip it. http://qi-hw.com/p/openwrt-packages/0bbedb6 | 05:11 |
qi-bot | [commit] David Kühling: comment http://qi-hw.com/p/openwrt-packages/d9d8ede | 05:11 |
qi-bot | [commit] David Kühling: delate renamed patch http://qi-hw.com/p/openwrt-packages/8836971 | 05:11 |
qi-bot | [commit] David Kühling: Adapt config.full_system to new emacs package name. Add emacs japanese http://qi-hw.com/p/openwrt-xburst/edd7c39 | 06:00 |
qi-bot | [commit] David Kühling: fix dependency after emacs-bin package was renamed http://qi-hw.com/p/openwrt-packages/04e813c | 06:00 |
qi-bot | [commit] Wolfgang Spraul: moved 3 folders in kicad/ one level up http://qi-hw.com/p/xue/54b07e5 | 06:35 |
qi-bot | [commit] Wolfgang Spraul: moved camera and camera_psu schematics pages to new daughterboard project http://qi-hw.com/p/xue/db5dd90 | 08:11 |
qi-bot | [commit] Wolfgang Spraul: added footprint_review target http://qi-hw.com/p/xue/a0e0473 | 08:41 |
qi-bot | [commit] Wolfgang Spraul: better target name http://qi-hw.com/p/xue/6fc7066 | 08:41 |
qi-bot | [commit] Wolfgang Spraul: minor .gitignore improvement, removed risky wildcard from clean target http://qi-hw.com/p/xue/fe25eaf | 08:46 |
qi-bot | [commit] Wolfgang Spraul: removed camera and camera_psu schematics pages http://qi-hw.com/p/xue/a7a2fab | 09:08 |
qi-bot | [commit] Werner Almesberger: atusb: firmware update for the 2010-12-16 board series http://qi-hw.com/p/ben-wpan/ad2c72f | 19:19 |
qi-bot | [commit] Werner Almesberger: atusb.brd: avoid track leaving pad 16 of U2 laterally, for better solderability http://qi-hw.com/p/ben-wpan/9fa026e | 19:19 |
qi-bot | [commit] Werner Almesberger: usb.sch: explain how the the ID pin works http://qi-hw.com/p/ben-wpan/3cb3827 | 19:19 |
qi-bot | [commit] Werner Almesberger: atusb.brd: several small solderability improvements http://qi-hw.com/p/ben-wpan/429e054 | 19:19 |
qi-bot | [commit] Werner Almesberger: atusb: more small layout improvements http://qi-hw.com/p/ben-wpan/63e1704 | 19:19 |
qi-bot | [commit] Werner Almesberger: atusb/cam2/mkmk: compensate deflection when cutting the board outline http://qi-hw.com/p/ben-wpan/8f2dbf7 | 19:19 |
qi-bot | [commit] Werner Almesberger: atusb/fw/common/config.h: corrected BOARD_xxx names in #if defined() http://qi-hw.com/p/ben-wpan/d5f7820 | 19:19 |
qi-bot | [commit] Werner Almesberger: bin/qippl: log into www-data@downloads.qi-hardware.com or scp files http://qi-hw.com/p/wernermisc/4952157 | 19:26 |
qi-bot | [commit] Adam Wang: new file .gitignore http://qi-hw.com/p/mmone-jtag-serial-cable/d398143 | 20:34 |
qi-bot | [commit] Adam Wang: delete /bom/*.ord & /bom/*.par http://qi-hw.com/p/mmone-jtag-serial-cable/46bf92f | 20:43 |
qi-bot | [commit] Wolfgang Spraul: testing schhist heuristics p1: expantion.sch renamed to epansion.sch http://qi-hw.com/p/xue/38a326e | 00:19 |
---|---|---|
qi-bot | [commit] Wolfgang Spraul: USB.sch -> usb.sch http://qi-hw.com/p/xue/e819459 | 00:44 |
qi-bot | [commit] Wolfgang Spraul: NV_MEMORIES.sch -> flash.sch http://qi-hw.com/p/xue/ccaece9 | 00:44 |
qi-bot | [commit] Wolfgang Spraul: PSU.sch -> psu.sch http://qi-hw.com/p/xue/68f0425 | 00:44 |
qi-bot | [commit] Wolfgang Spraul: DRAM.sch -> sdram.sch http://qi-hw.com/p/xue/eb9b37b | 00:44 |
qi-bot | [commit] Wolfgang Spraul: eth_phy.sch -> ether.sch http://qi-hw.com/p/xue/1bae64c | 00:59 |
qi-bot | [commit] Wolfgang Spraul: sensor.sch -> camera.sch http://qi-hw.com/p/xue/1e72d66 | 00:59 |
qi-bot | [commit] Wolfgang Spraul: sensor_psu.sch -> camera_psu.sch http://qi-hw.com/p/xue/2e024d4 | 00:59 |
qi-bot | [commit] Wolfgang Spraul: DBG_PRG.sch -> dbg_prg.sch http://qi-hw.com/p/xue/9804276 | 00:59 |
qi-bot | [commit] Wolfgang Spraul: FPGA_0_2_PROG.sch -> fpga1.sch http://qi-hw.com/p/xue/655edaf | 00:59 |
qi-bot | [commit] Wolfgang Spraul: FPGA_1_3.sch -> fpga2.sch http://qi-hw.com/p/xue/4e0ed9a | 00:59 |
qi-bot | [commit] Wolfgang Spraul: removed 4 generated and temporary/local files http://qi-hw.com/p/xue/82891cc | 01:12 |
qi-bot | [commit] Wolfgang Spraul: renamed 'DDR Banks' string to sdram http://qi-hw.com/p/xue/44837ea | 01:12 |
qi-bot | [commit] Wolfgang Spraul: fixed FPGA GIOS -> expansion string http://qi-hw.com/p/xue/a1bc1f4 | 02:35 |
qi-bot | [commit] Wolfgang Spraul: fixed Image Sensor -> camera string http://qi-hw.com/p/xue/431332d | 02:35 |
qi-bot | [commit] Wolfgang Spraul: fixed Snesor PSU -> camera_psu string http://qi-hw.com/p/xue/cc12688 | 02:35 |
qi-bot | [commit] Wolfgang Spraul: fixed fpga1 string http://qi-hw.com/p/xue/26d165e | 02:35 |
qi-bot | [commit] Wolfgang Spraul: fixed fpga2 string http://qi-hw.com/p/xue/cfa9305 | 02:35 |
qi-bot | [commit] Wolfgang Spraul: fixed dbg_prg string http://qi-hw.com/p/xue/c6dbc8e | 02:35 |
qi-bot | [commit] Wolfgang Spraul: fixed psu string http://qi-hw.com/p/xue/965f69e | 02:35 |
qi-bot | [commit] Wolfgang Spraul: fixed flash string http://qi-hw.com/p/xue/077c29d | 02:35 |
qi-bot | [commit] Wolfgang Spraul: renaming schematics pages http://qi-hw.com/p/xue/5dd9abe | 03:07 |
qi-bot | [commit] Werner Almesberger: bin/purge: revert KiCad .pro files in which only the timestamp changed http://qi-hw.com/p/wernermisc/9a3f873 | 03:35 |
qi-bot | [commit] Wolfgang Spraul: deleted backup, cache and generated files from repository http://qi-hw.com/p/xue/933c558 | 03:37 |
qi-bot | [commit] Wolfgang Spraul: removed backup files and generated netlist http://qi-hw.com/p/xue/90179e0 | 05:12 |
qi-bot | [commit] Wolfgang Spraul: removed two cache files http://qi-hw.com/p/xue/493444a | 05:12 |
qi-bot | [commit] Wolfgang Spraul: added simple Makefile http://qi-hw.com/p/xue/8a5aeea | 05:12 |
qi-bot | [commit] Wolfgang Spraul: reordered schematics pages http://qi-hw.com/p/xue/67098a2 | 05:27 |
qi-bot | [commit] Wolfgang Spraul: rescued two components from cache library http://qi-hw.com/p/xue/547954e | 07:25 |
qi-bot | [commit] Wolfgang Spraul: added brd target http://qi-hw.com/p/xue/6e6644b | 07:44 |
qi-bot | [commit] Wolfgang Spraul: minor file cleanup (permissions, name, local files) http://qi-hw.com/p/xue/12e7b3e | 08:53 |
qi-bot | [commit] Xiangfu Liu: add 127.0.0.1 BenNanoNote to hosts file http://qi-hw.com/p/openwrt-xburst/170c1c4 | 09:57 |
qi-bot | [commit] David Kühling: fix DNS timeout problem when applications resolve the FQDN http://qi-hw.com/p/openwrt-xburst/13c25db | 10:18 |
qi-bot | [commit] David Kühling: Merge branch 'master' of projects.qi-hardware.com:openwrt-xburst http://qi-hw.com/p/openwrt-xburst/5f96353 | 10:18 |
qi-bot | [commit] Xiangfu Liu: new pakcage: http://qi-hw.com/p/openwrt-packages/2d8f0d6 | 11:24 |
qi-bot | [commit] David Kühling: undo hosts file fix. Xiangfu was quicker and did it better :) http://qi-hw.com/p/openwrt-xburst/2792c8b | 14:42 |
qi-bot | [commit] Wolfgang Spraul: unzipped 2 files http://qi-hw.com/p/xue/29e7ced | 20:39 |
qi-bot | [commit] Wolfgang Spraul: removed xue-bom.ods which only had a few web links for memory chips http://qi-hw.com/p/xue/c0089b7 | 20:45 |
qi-bot | [commit] Wolfgang Spraul: renamed kicad/library to kicad/components for consistency http://qi-hw.com/p/xue/99067ec | 20:47 |
qi-bot | [commit] Andres Calderon: kicad modules makefile has been added http://qi-hw.com/p/xue/c49a037 | 21:12 |
qi-bot | [commit] Andres Calderon: Merge branch 'master' of projects.qi-hardware.com:xue http://qi-hw.com/p/xue/be6e03b | 21:12 |
qi-bot | [commit] Wolfgang Spraul: deleted empty .dcm files http://qi-hw.com/p/xue/a3b6d36 | 21:50 |
qi-bot | [commit] Wolfgang Spraul: added 33pF 0402 capacitor to BOOKSHELF http://qi-hw.com/p/mmone-jtag-serial-cable/34eaee8 | 03:17 |
---|---|---|
qi-bot | [commit] Adam Wang: add R15 and P1 for other source http://qi-hw.com/p/mmone-jtag-serial-cable/2380579 | 04:37 |
qi-bot | [commit] Werner Almesberger: modules/usd-card.fpd: added measurement of total length http://qi-hw.com/p/kicad-libs/c4f0592 | 05:55 |
qi-bot | [commit] Adam Wang: Add alias names for some parts http://qi-hw.com/p/mmone-jtag-serial-cable/d222b3f | 08:01 |
qi-bot | [commit] Wolfgang Spraul: removed two generated png files, leaving svg originals http://qi-hw.com/p/xue/fb852f7 | 23:46 |
qi-bot | [commit] Werner Almesberger: cameo/ops.c (tool_comp_paths): inside/outside logic was reversed for outer path http://qi-hw.com/p/cae-tools/ed6bbff | 00:39 |
---|---|---|
qi-bot | [commit] Werner Almesberger: atusb/cam2/mkmk: new-style CAM script http://qi-hw.com/p/ben-wpan/000d270 | 00:40 |
qi-bot | [commit] Werner Almesberger: cngt: added support for setting default positions from toolpath file http://qi-hw.com/p/cae-tools/ffaded7 | 02:50 |
qi-bot | [commit] Werner Almesberger: mkmk: further improvements and updates http://qi-hw.com/p/ben-wpan/1bef41f | 03:20 |
qi-bot | [commit] Werner Almesberger: atusb.brd: removed stray pad http://qi-hw.com/p/ben-wpan/d7719af | 03:20 |
qi-bot | [commit] Werner Almesberger: cameo: added optimization of movements between tool paths http://qi-hw.com/p/cae-tools/57b4e27 | 14:38 |
qi-bot | [commit] Werner Almesberger: atusb: updated and improved CAM script http://qi-hw.com/p/ben-wpan/ba310a8 | 14:38 |
qi-bot | [commit] Xiangfu Liu: bash-files: update the package url http://qi-hw.com/p/openwrt-xburst/6f74fce | 20:19 |
qi-bot | [commit] Werner Almesberger: cameo: migrated Excellon reader from drl2gp http://qi-hw.com/p/cae-tools/848eb2a | 04:38 |
---|---|---|
qi-bot | [commit] Werner Almesberger: cameo: adding support for dril/mill substitutions (in progress) http://qi-hw.com/p/cae-tools/b1652fc | 04:38 |
qi-bot | [commit] Werner Almesberger: cameo: completed support for dril/mill conversions http://qi-hw.com/p/cae-tools/7a64e42 | 04:38 |
qi-bot | [commit] Werner Almesberger: cameo: added command "append", improved file output error checking http://qi-hw.com/p/cae-tools/b8f6545 | 04:38 |
qi-bot | [commit] Werner Almesberger: cameo: "array" did not affect subsequently loaded files http://qi-hw.com/p/cae-tools/b76d17f | 04:38 |
qi-bot | [commit] Werner Almesberger: cameo: apply translation after loading a file only to the new file http://qi-hw.com/p/cae-tools/7cb25c5 | 04:38 |
qi-bot | [commit] David Kühling: tune Emacs' RAM usage (down to approx 10MB now). Hide menu bar, http://qi-hw.com/p/openwrt-packages/ccd5818 | 18:46 |
qi-bot | [commit] David Kühling: updated Emacs loadup.el http://qi-hw.com/p/openwrt-packages/5c645d1 | 18:49 |
qi-bot | [commit] Werner Almesberger: cameo/gerber.c (gerber_read): store coordinates as floats after conversion http://qi-hw.com/p/cae-tools/9959224 | 20:43 |
qi-bot | [commit] Werner Almesberger: cngt: tool change utility for MDX15/20 (in progress) http://qi-hw.com/p/cae-tools/154be2b | 20:43 |
qi-bot | [commit] Werner Almesberger: cngt: some small fixes http://qi-hw.com/p/cae-tools/62152e2 | 20:43 |
qi-bot | [commit] Wolfgang Spraul: added ft2232h/c datasheets to BOOKSHELF http://qi-hw.com/p/xue/5642fde | 00:04 |
---|---|---|
qi-bot | [commit] Wolfgang Spraul: better PDF links in BOOKSHELF http://qi-hw.com/p/xue/d5e48e6 | 02:16 |
qi-bot | [commit] David Kühling: added emacs startup file for configuring stuff specific to the openwrt package http://qi-hw.com/p/openwrt-packages/f00fc23 | 03:08 |
qi-bot | [commit] David Kühling: pull out japanese input dictionary into a separate package. it's too large to http://qi-hw.com/p/openwrt-packages/a670379 | 03:08 |
qi-bot | [commit] David Kühling: typo http://qi-hw.com/p/openwrt-packages/31a24f8 | 03:09 |
qi-bot | [commit] David Kühling: another type http://qi-hw.com/p/openwrt-packages/7235d39 | 03:11 |
qi-bot | [commit] Wolfgang Spraul: removed lpddr datasheet copy, linked from BOOKSHELF http://qi-hw.com/p/xue/3cdb0ec | 03:23 |
qi-bot | [commit] Xiangfu Liu: config.all_packages: add all packages config file base on minial http://qi-hw.com/p/openwrt-xburst/ab11437 | 03:45 |
qi-bot | [commit] kyak: QBall: a QT-base breakout game http://qi-hw.com/p/openwrt-packages/e5016ec | 13:26 |
qi-bot | [commit] David Kühling: more complete _host_ installation of Emacs so we can run ja-dic-cnv etc., http://qi-hw.com/p/openwrt-packages/4a33228 | 16:07 |
qi-bot | [commit] David Kühling: an alternative, smaller, japanese input dictionary for Emacs http://qi-hw.com/p/openwrt-packages/f32d4c4 | 16:07 |
qi-bot | [commit] David Kühling: fix installation directory, package depenencies http://qi-hw.com/p/openwrt-packages/cfb4a67 | 16:29 |
qi-bot | [commit] David Kühling: Fix dependencies http://qi-hw.com/p/openwrt-packages/b7c65f3 | 16:29 |
qi-bot | [commit] Xiangfu Liu: update the qi-hardware sources mirror address http://qi-hw.com/p/openwrt-xburst/addbbd7 | 21:09 |
qi-bot | [commit] Werner Almesberger: cameo: added KiCad Gerber input and path merging http://qi-hw.com/p/cae-tools/8999b30 | 22:47 |
qi-bot | [commit] Werner Almesberger: cameo: adding toolpath adaptation language (in progress) http://qi-hw.com/p/cae-tools/f80a01a | 22:47 |
qi-bot | [commit] Werner Almesberger: cameo: changed dog_bone from global variable to argument http://qi-hw.com/p/cae-tools/1f63ef6 | 22:47 |
qi-bot | [commit] Werner Almesberger: cameo/lang.y (align): completed alignment function http://qi-hw.com/p/cae-tools/c8b62c2 | 22:47 |
qi-bot | [commit] Werner Almesberger: cameo: moved tool compensation from cameo.c to ops.c http://qi-hw.com/p/cae-tools/2bf4559 | 22:47 |
qi-bot | [commit] Werner Almesberger: cameo: call tool compensation from script http://qi-hw.com/p/cae-tools/86c27db | 22:47 |
qi-bot | [commit] Werner Almesberger: cameo: added invocation with an optional script http://qi-hw.com/p/cae-tools/fe50add | 22:47 |
qi-bot | [commit] Werner Almesberger: cameo: various scanner and parser fixes http://qi-hw.com/p/cae-tools/ddcf519 | 22:47 |
qi-bot | [commit] Werner Almesberger: cameo: documented X/Y translation commands, some small improvements http://qi-hw.com/p/cae-tools/f36f704 | 22:47 |
qi-bot | [commit] Werner Almesberger: cameo: split numbers into dimensions and "bare" numbers http://qi-hw.com/p/cae-tools/68d5eff | 22:47 |
qi-bot | [commit] Werner Almesberger: cameo: cleaned up and documented the tool compensation http://qi-hw.com/p/cae-tools/3ae3d6c | 22:47 |
qi-bot | [commit] Werner Almesberger: cameo: fixed processing of omitted file names, documented file name usage http://qi-hw.com/p/cae-tools/26dc02e | 22:47 |
qi-bot | [commit] Xiangfu Liu: sdcv: add --utf8-output paramer http://qi-hw.com/p/openwrt-packages/397ad4e | 02:44 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: config.full_system: add emacs http://qi-hw.com/p/openwrt-xburst/1790d45 | 08:19 |
qi-bot | [commit] Werner Almesberger: dsv: added DSV_PDFVIEWER as a means to set a PDF viewer different from xpdf http://qi-hw.com/p/eda-tools/fb1c75c | 09:55 |
qi-bot | [commit] Werner Almesberger: dsv: print usage on "dsv setup" without file name http://qi-hw.com/p/eda-tools/ff29948 | 09:55 |
qi-bot | [commit] Wolfgang Spraul: removed STEP-DOWN-CONVERTER alias http://qi-hw.com/p/xue/94d892a | 10:02 |
qi-bot | [commit] Wolfgang Spraul: better U4 link http://qi-hw.com/p/xue/12b020f | 23:23 |
qi-bot | [commit] Wolfgang Spraul: cleaned dsv nicks http://qi-hw.com/p/xue/1d56cbb | 23:50 |
qi-bot | [commit] Xiangfu Liu: gmenu2x: clear the screen when start http://qi-hw.com/p/openwrt-packages/0ea4bc4 | 00:41 |
---|---|---|
qi-bot | [commit] David Kühling: fix lisp load path. split into multiple packages for quicker update/testing, http://qi-hw.com/p/openwrt-packages/90232b5 | 08:12 |
qi-bot | [commit] David Kühling: add missing libstdc++ dependency http://qi-hw.com/p/openwrt-packages/d4328e1 | 08:12 |
qi-bot | [commit] David Kühling: fix generation of emacs-el package http://qi-hw.com/p/openwrt-packages/fb953f2 | 09:01 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: Sync signal to mcu is taken from SiGE as result removed non needed code and fixed identation http://qi-hw.com/p/ben-gps-sdr/f7203fa | 09:07 |
---|---|---|
qi-bot | [commit] Cristian Paul Peñaranda Rojas: Updated simulation, reset trigger removed http://qi-hw.com/p/ben-gps-sdr/f0ae342 | 09:07 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: Pin asigment is completed http://qi-hw.com/p/ben-gps-sdr/c379297 | 09:07 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: Added README with basic description and spected behavior http://qi-hw.com/p/ben-gps-sdr/31ad2b4 | 09:12 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: Updated makefile to be more friendly and removed non required features http://qi-hw.com/p/ben-gps-sdr/4e57bf8 | 09:21 |
qi-bot | [commit] David Kühling: First shot at an Emacs package. Experimental! http://qi-hw.com/p/openwrt-packages/bea9c01 | 18:35 |
qi-bot | [commit] Xiangfu Liu: setfont2: remove autostart by it's package http://qi-hw.com/p/openwrt-packages/5adb5f3 | 00:41 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: files: disable atd, telnet, led in nanonote http://qi-hw.com/p/openwrt-xburst/20637c4 | 01:44 |
qi-bot | [commit] werner: The box coordinates were not properly initialized in gui_draw_pad_text http://qi-hw.com/p/fped/177fe9c | 02:51 |
qi-bot | [commit] werner: - test/tsort: "Aborted" doesn't get reported on all platforms, so we just http://qi-hw.com/p/fped/0bfba12 | 02:51 |
qi-bot | [commit] werner: The box coordinates were not properly initialized in gui_draw_pad_text http://qi-hw.com/p/fped/177fe9c | 02:55 |
qi-bot | [commit] werner: - test/tsort: "Aborted" doesn't get reported on all platforms, so we just http://qi-hw.com/p/fped/0bfba12 | 02:55 |
qi-bot | [commit] Xiangfu Liu: add debian package stuff http://qi-hw.com/p/fped/680e64d | 02:55 |
qi-bot | [commit] Xiangfu Liu: clean up the Build-Depends. http://qi-hw.com/p/fped/28af3a5 | 02:55 |
qi-bot | [commit] Xiangfu Liu: use the new version rules. http://qi-hw.com/p/fped/911f66a | 02:55 |
qi-bot | [commit] Xiangfu Liu: add debian/fped.manpages for install manpage http://qi-hw.com/p/fped/d75afd9 | 02:55 |
qi-bot | [commit] Xiangfu Liu: update to svn rev 5982, enable dh_auto_test http://qi-hw.com/p/fped/6ebf43a | 02:55 |
qi-bot | [commit] Xiangfu Liu: use usual name for orig tarball top-level directory http://qi-hw.com/p/fped/9d2da9f | 02:55 |
qi-bot | [commit] Xiangfu Liu: update take svn rev: 5983 http://qi-hw.com/p/fped/e1a04fa | 02:55 |
qi-bot | [commit] Xiangfu Liu: remove the Build-Depends ttf-liberation http://qi-hw.com/p/fped/d1ec140 | 02:55 |
qi-bot | [commit] Xiangfu Liu: update to svn rev 5986 http://qi-hw.com/p/fped/badfbe0 | 02:55 |
qi-bot | [commit] Xiangfu Liu: override dh_auto_clean, use make spotless instread http://qi-hw.com/p/fped/df1b45e | 02:55 |
qi-bot | [commit] Xiangfu Liu: add ghostscript to Build-Depends http://qi-hw.com/p/fped/edf47c5 | 02:55 |
qi-bot | [commit] Xiangfu Liu: update the homepage to help webpage http://qi-hw.com/p/fped/8821d96 | 02:55 |
qi-bot | [commit] Xiangfu Liu: update to r5997 http://qi-hw.com/p/fped/8b80410 | 02:55 |
qi-bot | [commit] Xiangfu Liu: mathomatic: add DEPENDS libncurses http://qi-hw.com/p/openwrt-packages/6b6a194 | 09:39 |
qi-bot | [commit] Werner Almesberger: drl2gp.c: added parsing of INCH/METRIC in header http://qi-hw.com/p/cae-tools/a865854 | 01:13 |
---|---|---|
qi-bot | [commit] Werner Almesberger: drl2gp.c: detect and report errors when writing to standard output http://qi-hw.com/p/cae-tools/b75611a | 01:13 |
qi-bot | [commit] Werner Almesberger: drl2gp.c: implemented drill file filtering, some code restructuring http://qi-hw.com/p/cae-tools/6f040f6 | 01:13 |
qi-bot | [commit] Werner Almesberger: drl2gp.c: implemented drill file filtering, some code restructuring http://qi-hw.com/p/cae-tools/6000257 | 01:50 |
qi-bot | [commit] Werner Almesberger: drl2gp: added README and a copy of the GPLv2 http://qi-hw.com/p/cae-tools/c411262 | 01:50 |
qi-bot | [commit] Werner Almesberger: Merge branch 'master' of projects.qi-hardware.com:cae-tools http://qi-hw.com/p/cae-tools/f6cf2e1 | 01:50 |
qi-bot | [commit] Xiangfu Liu: gmenu2x: add sdcv icon http://qi-hw.com/p/openwrt-packages/ba2629d | 04:36 |
qi-bot | [commit] Xiangfu Liu: Revert "disable fbterm and lynx, since they do not compile... latter one should be easy to fix (missing iconv.h)" http://qi-hw.com/p/openwrt-xburst/6862ea4 | 04:40 |
qi-bot | [commit] Xiangfu Liu: config.full_system add wtime http://qi-hw.com/p/openwrt-xburst/5a9fb2d | 04:40 |
qi-bot | [commit] kyak: qstardict: disable mouse, fit Setting dialogue to 320x240 http://qi-hw.com/p/openwrt-packages/5d704f5 | 13:37 |
qi-bot | [commit] Werner Almesberger: drl2gp: drilling and circle milling work, various fixes (more to come) http://qi-hw.com/p/cae-tools/49a42cb | 03:57 |
---|---|---|
qi-bot | [commit] Werner Almesberger: drl2gp.c: added milling of slots (more to come) http://qi-hw.com/p/cae-tools/32f36cc | 03:57 |
qi-bot | [commit] kyak: qstardict: initial port http://qi-hw.com/p/openwrt-packages/fa4bfac | 09:11 |
qi-bot | [commit] Xiangfu Liu: remove freedroid http://qi-hw.com/p/openwrt-packages/4ad9ef5 | 10:39 |
qi-bot | [commit] Xiangfu Liu: remove BROKEN,add --without-mp3 by default http://qi-hw.com/p/openwrt-packages/760fbb1 | 10:39 |
qi-bot | [commit] Xiangfu Liu: add moc qstardict to config.full_system http://qi-hw.com/p/openwrt-xburst/e9fe7d7 | 10:39 |
qi-bot | [commit] kyak: qstardict: adjust main window to look nicer http://qi-hw.com/p/openwrt-packages/c97f249 | 14:09 |
qi-bot | [commit] Jiri Brozovsky: Small command line time tracker - openwrt port, patched for better help message. http://qi-hw.com/p/openwrt-packages/d02893d | 14:51 |
qi-bot | [commit] Xiangfu Liu: remove the pixelformat=RGB24, make some program display not correct http://qi-hw.com/p/openwrt-xburst/340a6c5 | 01:23 |
---|---|---|
qi-bot | [commit] Werner Almesberger: cameo/gnuplot.c (gnuplot_do_write): only write r_tool hint if non-zero http://qi-hw.com/p/cae-tools/d31bd95 | 19:15 |
qi-bot | [commit] Werner Almesberger: drl2gp: convert KiCad drill file (Excellon) to gnuplot (in progress) http://qi-hw.com/p/cae-tools/1ab2622 | 19:15 |
qi-bot | [commit] Andres Calderon: Has been moved the labels that overlap. http://qi-hw.com/p/xue/fb92de3 | 07:06 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: mv all gmenu2x stuff to it's package http://qi-hw.com/p/openwrt-xburst/32e4611 | 08:29 |
qi-bot | [commit] Xiangfu Liu: move gmenu2x from openwrt-xburst.git to it's package http://qi-hw.com/p/openwrt-packages/e517e97 | 08:29 |
qi-bot | [commit] Xiangfu Liu: remove temp file http://qi-hw.com/p/openwrt-packages/ce1b4fa | 08:35 |
qi-bot | [commit] Xiangfu Liu: add icon for snownews http://qi-hw.com/p/openwrt-packages/af56909 | 08:35 |
qi-bot | [commit] Xiangfu Liu: add nanonote-example-files pakcage to config.full_system http://qi-hw.com/p/openwrt-xburst/225b32c | 10:36 |
qi-bot | [commit] kyak: stardict: add missing dependencies http://qi-hw.com/p/openwrt-packages/6c23e13 | 12:15 |
qi-bot | [commit] Werner Almesberger: ecn/ecn0007.txt: Revised via spacing (for the antenna) http://qi-hw.com/p/ben-wpan/fbd3e53 | 16:59 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: Code now uses a shift register, and sync once to sync signal http://qi-hw.com/p/ben-gps-sdr/0324a53 | 20:51 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: SPI like (4bit I/Q) to Nibble (4Bit) module http://qi-hw.com/p/ben-gps-sdr/9c1cbfe | 14:59 |
---|---|---|
qi-bot | [commit] Cristian Paul Peñaranda Rojas: added simulation clkd,data and sync http://qi-hw.com/p/ben-gps-sdr/31b9fc9 | 19:19 |
qi-bot | [commit] Juan64Bits: First functional example, ADC an Framebuffer Test http://qi-hw.com/p/nn-usb-fpga/8d95564 | 15:14 |
---|
qi-bot | [commit] kyak: config.debug: the minimal .config with debugging capabilities http://qi-hw.com/p/openwrt-xburst/1c5d309 | 03:32 |
---|---|---|
qi-bot | [commit] Cristian Paul Peñaranda Rojas: created notes folder http://qi-hw.com/p/ben-gps-sdr/1c2e0de | 19:22 |
qi-bot | [commit] Cristian Paul Peñaranda Rojas: missing simple(stupid) code to initialize and read adc buffer http://qi-hw.com/p/ben-gps-sdr/351e1d5 | 19:35 |
qi-bot | [commit] Xiangfu Liu: new package: moc, a console audio player http://qi-hw.com/p/openwrt-packages/d072c91 | 00:50 |
---|---|---|
qi-bot | [commit] kyak: delete accidental config.full_system.rej http://qi-hw.com/p/openwrt-xburst/bba48ac | 02:01 |
qi-bot | [commit] Werner Almesberger: usrp/fscan: results are now quite stable, so 20 instead of 100 runs are enough http://qi-hw.com/p/ben-wpan/60d78fd | 10:25 |
qi-bot | [commit] Werner Almesberger: usrp: adjust outlier rejection and signal range for improved antennas http://qi-hw.com/p/ben-wpan/c2b489d | 10:25 |
qi-bot | [commit] Werner Almesberger: atusb: rearrange I/Os for new layout http://qi-hw.com/p/ben-wpan/36ea2be | 10:25 |
qi-bot | [commit] Werner Almesberger: atusb.brd: new layout (in progress) http://qi-hw.com/p/ben-wpan/ecaab60 | 10:25 |
qi-bot | [commit] Werner Almesberger: atusb.brd: more layout work (on-going) http://qi-hw.com/p/ben-wpan/20c0517 | 19:05 |
qi-bot | [commit] Werner Almesberger: atusb: added bottom ground zones (on-going) http://qi-hw.com/p/ben-wpan/8a3a428 | 19:05 |
qi-bot | [commit] Werner Almesberger: atusb/atusb.brd: added ground zones on front layer as well http://qi-hw.com/p/ben-wpan/c7d485a | 19:05 |
qi-bot | [commit] Werner Almesberger: atusb: move traces to coincide with thermal relief http://qi-hw.com/p/ben-wpan/a641eb7 | 21:31 |
qi-bot | [commit] Werner Almesberger: atusb: bumped version number to 20101202 http://qi-hw.com/p/ben-wpan/fb26941 | 21:31 |
qi-bot | [commit] Werner Almesberger: atusb/cam: updated CAM process for new board http://qi-hw.com/p/ben-wpan/876e12b | 21:31 |
qi-bot | [commit] Werner Almesberger: atusb: add automatic board revision detection; clean up feed line http://qi-hw.com/p/ben-wpan/b8877e0 | 22:06 |
qi-bot | [commit] Xiangfu Liu: add -Vall to alsamixer, for display MIC stuff http://qi-hw.com/p/openwrt-xburst/df2cf67 | 22:36 |
qi-bot | [commit] Xiangfu Liu: update the homepage to help webpage http://qi-hw.com/p/fped/5a5bc8c | 00:28 |
---|---|---|
qi-bot | [commit] kyak: reflash_ben.sh: add progress bar http://qi-hw.com/p/openwrt-xburst/5cb8088 | 02:33 |
qi-bot | [commit] Xiangfu Liu: move ks7010 firmware to it's package http://qi-hw.com/p/openwrt-xburst/0403a6a | 05:26 |
qi-bot | [commit] Xiangfu Liu: move those example file to a new package: nanonote-example-files http://qi-hw.com/p/openwrt-xburst/4e3b2db | 05:51 |
qi-bot | [commit] Xiangfu Liu: new package, nanonote example files package http://qi-hw.com/p/openwrt-packages/ca85c07 | 06:00 |
qi-bot | [commit] Mirko Vogt: disable fbterm and lynx, since they do not compile... latter one should be easy to fix (missing iconv.h) http://qi-hw.com/p/openwrt-xburst/d170cb7 | 06:38 |
qi-bot | [commit] carlos: Adding PS2, capacitive keyboard examples http://qi-hw.com/p/nn-usb-fpga/62d0edf | 08:40 |
qi-bot | [commit] Werner Almesberger: atusb: use 0402 as the preferred component size and replace bad TVS http://qi-hw.com/p/ben-wpan/23c3726 | 09:10 |
qi-bot | [commit] Werner Almesberger: usrp/README: change threshold to avoid making section reference look like a typo http://qi-hw.com/p/ben-wpan/fea4ee5 | 09:10 |
qi-bot | [commit] Werner Almesberger: usrp: try to bring back sanity to pre- and post-processing of FFT data http://qi-hw.com/p/ben-wpan/40d1234 | 09:10 |
qi-bot | [commit] Werner Almesberger: ants/cam: update for latest workpiece http://qi-hw.com/p/ben-wpan/04972bb | 09:10 |
qi-bot | [commit] Werner Almesberger: usrp: update filtering and display for uncorrupted measurement setup http://qi-hw.com/p/ben-wpan/b3c0b4b | 09:10 |
qi-bot | [commit] Werner Almesberger: usrp/doall: usage and allow passing of arguments to evscan as well http://qi-hw.com/p/ben-wpan/e52b92f | 09:10 |
qi-bot | [commit] Werner Almesberger: usrp/range: more useful diagnostic output and harden against underflows http://qi-hw.com/p/ben-wpan/8ea1715 | 09:10 |
qi-bot | [commit] Werner Almesberger: atusb: updated footprint assignment http://qi-hw.com/p/ben-wpan/9ad0609 | 09:10 |
qi-bot | [commit] Werner Almesberger: atusb/cam: modernize, and change setup for current workpiece http://qi-hw.com/p/ben-wpan/e137bc4 | 09:10 |
qi-bot | [commit] Werner Almesberger: atusb: remove two unnecessary test points http://qi-hw.com/p/ben-wpan/521dab8 | 11:33 |
qi-bot | [commit] Xiangfu Liu: automatic create /dev/rtc http://qi-hw.com/p/openwrt-xburst/f104603 | 21:02 |
qi-bot | [commit] Werner Almesberger: atusb: remove test points from MCU-RF interconnect http://qi-hw.com/p/ben-wpan/6b639b2 | 03:40 |
---|---|---|
qi-bot | [commit] Werner Almesberger: atusb: shrink C2 pads to test point size http://qi-hw.com/p/ben-wpan/ee6c945 | 03:40 |
qi-bot | [commit] Werner Almesberger: atusb: switch from mini-USB receptacle to full-size USB plug http://qi-hw.com/p/ben-wpan/0463d30 | 03:40 |
qi-bot | [commit] Werner Almesberger: atusb: use Johanson 2450FB15L0001 instead of discrete balun circuit http://qi-hw.com/p/ben-wpan/370cf83 | 03:40 |
qi-bot | [commit] Werner Almesberger: atusb: since we always drive TST, we don't need the pull-down http://qi-hw.com/p/ben-wpan/11202dd | 03:40 |
qi-bot | [commit] Xiangfu Liu: NanoMap: move sample maps from openwrt-xburst.git:/data to package. http://qi-hw.com/p/openwrt-packages/ebb0be2 | 03:42 |
qi-bot | [commit] Xiangfu Liu: nightsky: cp example-nightsky.yml to root/ http://qi-hw.com/p/openwrt-packages/ba83e78 | 03:42 |
qi-bot | [commit] Xiangfu Liu: move sample NanoMap maps to it's package http://qi-hw.com/p/openwrt-xburst/cfda538 | 03:43 |
qi-bot | [commit] Xiangfu Liu: move .nightsky.yml to it's package http://qi-hw.com/p/openwrt-xburst/791004c | 03:43 |
qi-bot | [commit] Xiangfu Liu: add new packages recently added in openwrt-package.git http://qi-hw.com/p/openwrt-xburst/3c34e10 | 04:57 |
qi-bot | [commit] Xiangfu Liu: config.full_system, group up it a little http://qi-hw.com/p/openwrt-xburst/36f8156 | 04:57 |
qi-bot | [commit] Xiangfu Liu: add new package gmenu2x icons: aewan, byobu, mc, powertop, snownews, tunec http://qi-hw.com/p/openwrt-xburst/f0ef443 | 05:36 |
qi-bot | [commit] Xiangfu Liu: remove VERSION, add more configure to directfbrc http://qi-hw.com/p/openwrt-xburst/f5fd251 | 05:40 |
qi-bot | [commit] Andres Calderon: Some progress in the BOOKSHELF file http://qi-hw.com/p/xue/42d9608 | 12:20 |
qi-bot | [commit] kyak: nightsky: fix postinstall http://qi-hw.com/p/openwrt-packages/d2cd55b | 13:53 |
qi-bot | [commit] Werner Almesberger: dsv: remove unnecessary double quotes in assignments http://qi-hw.com/p/eda-tools/3b3c4bf | 17:41 |
qi-bot | [commit] Werner Almesberger: dsv: make "dsv setup" accept spaces in names and aliases http://qi-hw.com/p/eda-tools/92cb580 | 17:41 |
qi-bot | [commit] Werner Almesberger: dsv (search): quote file name, so that we can also look up names with spaces http://qi-hw.com/p/eda-tools/e928d82 | 17:41 |
qi-bot | [commit] Werner Almesberger: dsv: in names, convert / to %2F and % to %25 http://qi-hw.com/p/eda-tools/be26998 | 17:41 |
qi-bot | [commit] Werner Almesberger: dsv (setup): make sure file ends with a newline, so that we can "read" it http://qi-hw.com/p/eda-tools/f207be6 | 17:41 |
qi-bot | [commit] Werner Almesberger: dsv (list): use "ls -b" to avoid confusing "column" with 8 bit characters http://qi-hw.com/p/eda-tools/4f65593 | 17:41 |
qi-bot | [commit] Xiangfu Liu: cleanup output message, output the flash process http://qi-hw.com/p/xburst-tools/4960824 | 07:01 |
---|
qi-bot | [commit] Xiangfu Liu: remove msmtp-queue, Applied in r24176 upstream http://qi-hw.com/p/openwrt-packages/ce7e2ed | 21:43 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: new package, aewan, Ascii Art Editor http://qi-hw.com/p/openwrt-packages/e357b2c | 22:55 |
qi-bot | [commit] Werner Almesberger: vialtray/tray.pl: y size is 93 mm, not 90; adjust y offset accordingly http://qi-hw.com/p/wernermisc/2c4e3eb | 23:05 |
qi-bot | [commit] Werner Almesberger: fix glitch in fft.c and add scripts to display data sets without temp file http://qi-hw.com/p/ben-wpan/eafb2a2 | 23:16 |
qi-bot | [commit] Werner Almesberger: ants: added 105% and 115% antennas http://qi-hw.com/p/ben-wpan/fa08ac3 | 23:52 |
qi-bot | [commit] Werner Almesberger: vialtray: make a tray for vials containing 0402/0603 components (in progress) http://qi-hw.com/p/wernermisc/1d72af7 | 20:55 |
---|---|---|
qi-bot | [commit] Werner Almesberger: libbb: library for bit-banging the Ben's uSD port (in progress) http://qi-hw.com/p/wernermisc/458702c | 20:55 |
qi-bot | [commit] Werner Almesberger: vialtray: ready for first test run (on-going) http://qi-hw.com/p/wernermisc/649e00b | 20:55 |
qi-bot | [commit] Werner Almesberger: vialtray: more parameter adjustments http://qi-hw.com/p/wernermisc/1d24b2e | 23:30 |
qi-bot | [commit] Werner Almesberger: usrp: support DCT in addition to complex FFT http://qi-hw.com/p/ben-wpan/83d2162 | 10:26 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ants: 80% antenna and adaptation of CAM script for various antenna sizes http://qi-hw.com/p/ben-wpan/404a0ee | 10:26 |
qi-bot | [commit] Xiangfu Liu: add fw_setenv_default for set all u-boot variable to default http://qi-hw.com/p/openwrt-xburst/49f1bbf | 00:40 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: files: remove display banner in /etc/profile http://qi-hw.com/p/openwrt-xburst/011732f | 05:12 |
qi-bot | [commit] Xiangfu Liu: new package, tunec, A command line guitar tuner for linux http://qi-hw.com/p/openwrt-packages/1404776 | 06:44 |
qi-bot | [commit] Xiangfu Liu: change the way of check wget error, which is more common http://qi-hw.com/p/openwrt-xburst/d3e685d | 09:03 |
qi-bot | [commit] kyak: hide warning messages on gmenu2x start http://qi-hw.com/p/openwrt-xburst/ade739d | 13:14 |
qi-bot | [commit] kyak: Revert "hide warning messages on gmenu2x start" http://qi-hw.com/p/openwrt-xburst/f0ca65e | 13:15 |
qi-bot | [commit] Xiangfu Liu: fix the wrong log.txt path, when using -l option http://qi-hw.com/p/openwrt-xburst/8e4e309 | 03:01 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: remove check root permissions http://qi-hw.com/p/xburst-tools/eb283a6 | 21:37 |
qi-bot | [commit] Xiangfu Liu: add qc icon in gmenu2x http://qi-hw.com/p/openwrt-xburst/9d51ca6 | 21:29 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: config.full_system: add netsurf, add Internet group http://qi-hw.com/p/openwrt-xburst/73829d1 | 23:31 |
qi-bot | [commit] Xiangfu Liu: config.full_system: add wget, nfs-utils, netcat http://qi-hw.com/p/openwrt-xburst/de462b9 | 02:45 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: [new package] ctronome, programmable console metronome software http://qi-hw.com/p/openwrt-packages/663b894 | 03:21 |
qi-bot | [commit] Werner Almesberger: qpkg: improve "qpkg ... list" http://qi-hw.com/p/wernermisc/b0c29c4 | 06:24 |
qi-bot | [commit] Werner Almesberger: qpkg: sort package version list such that highest comes first http://qi-hw.com/p/wernermisc/c05e6d5 | 06:24 |
qi-bot | [commit] Werner Almesberger: qpkg: regression test for version preference http://qi-hw.com/p/wernermisc/b181db5 | 06:24 |
qi-bot | [commit] Werner Almesberger: qpkg: adding handling of conflicts (in progress) http://qi-hw.com/p/wernermisc/be31904 | 06:24 |
qi-bot | [commit] Werner Almesberger: qpkg: detect conflicts with installed packages http://qi-hw.com/p/wernermisc/c44510a | 06:24 |
qi-bot | [commit] Werner Almesberger: qpkg: also consider conflicts introduced by package about to be added http://qi-hw.com/p/wernermisc/b89bcdf | 06:24 |
qi-bot | [commit] Werner Almesberger: qpkg: test for the QPKG_ADDING leakage bug http://qi-hw.com/p/wernermisc/8d453d7 | 21:00 |
qi-bot | [commit] Werner Almesberger: qpkg: move "struct pkg" and its allocation from gobble.c and qpkg.h to pkg.[hc] http://qi-hw.com/p/wernermisc/bbf9c42 | 21:00 |
qi-bot | [commit] Werner Almesberger: qpkg: added parsing and recording of Provides data http://qi-hw.com/p/wernermisc/9d208dd | 21:00 |
qi-bot | [commit] Werner Almesberger: qpkg/TODO: some open policy questions (cyclic dependencies and use of Provides) http://qi-hw.com/p/wernermisc/c95d064 | 21:00 |
qi-bot | [commit] Werner Almesberger: qpkg: light cleanup of prereq.c:resolve and change forgotten in last commit http://qi-hw.com/p/wernermisc/068264e | 21:00 |
qi-bot | [commit] Werner Almesberger: qpkg/test/bug-adding: found another manifestation of the same problem http://qi-hw.com/p/wernermisc/ab5df0a | 21:00 |
qi-bot | [commit] Werner Almesberger: qpkg: added some field names and relational operators from Ubuntu http://qi-hw.com/p/wernermisc/6a3e471 | 21:00 |
qi-bot | [commit] Xiangfu Liu: gmenu2x update, use the open.png as the default wallpaper http://qi-hw.com/p/openwrt-packages/728bd4d | 21:36 |
qi-bot | [commit] Xiangfu Liu: triggersad: update the download URL. http://qi-hw.com/p/openwrt-packages/d0c6f14 | 21:37 |
qi-bot | [commit] Werner Almesberger: qpkg: added README and COPYING.GPLv2 http://qi-hw.com/p/wernermisc/78006c5 | 02:37 |
---|---|---|
qi-bot | [commit] Werner Almesberger: qpkg: Makefile cleanup and added OpenWRT target http://qi-hw.com/p/wernermisc/9481934 | 02:37 |
qi-bot | [commit] Werner Almesberger: qpkg/TODO: cleanup and added new task for consideration http://qi-hw.com/p/wernermisc/07a4422 | 02:37 |
qi-bot | [commit] Werner Almesberger: qpkg: added copyright headers and changed name to emphasize speediness http://qi-hw.com/p/wernermisc/3d1ef02 | 02:37 |
qi-bot | [commit] Werner Almesberger: qpkg: turn pkg->installed into pkg->flags, allowing for future expansion http://qi-hw.com/p/wernermisc/a63823e | 02:37 |
qi-bot | [commit] Werner Almesberger: qpkg: towards "struct id" without jrb reference - change iteration and lookup http://qi-hw.com/p/wernermisc/7058115 | 02:37 |
qi-bot | [commit] Werner Almesberger: qpkg: towards "struct id" without jrb reference - change ID creation http://qi-hw.com/p/wernermisc/44e4434 | 02:37 |
qi-bot | [commit] Werner Almesberger: qpkg: give ID2S macro a more "offical" status http://qi-hw.com/p/wernermisc/dd0ee66 | 02:37 |
qi-bot | [commit] Werner Almesberger: qpkg: record Architecture: tag http://qi-hw.com/p/wernermisc/f14c041 | 02:37 |
qi-bot | [commit] Werner Almesberger: qpkg: perform sanity checks after parsing a package entry http://qi-hw.com/p/wernermisc/83c7164 | 02:37 |
qi-bot | [commit] Werner Almesberger: qpkg: added regression test harness and a few tests http://qi-hw.com/p/wernermisc/2c953a5 | 02:37 |
qi-bot | [commit] Xiangfu Liu: gmenu2x : disable log message http://qi-hw.com/p/openwrt-packages/65934ce | 09:01 |
qi-bot | [commit] Xiangfu Liu: remove /usr/bin/ben-ash, since we setfont2 in /usr/bin/gmenu2x http://qi-hw.com/p/openwrt-xburst/c8f893a | 09:58 |
qi-bot | [commit] Werner Almesberger: qpkg/qpkg.c: tighten detection of inconsistent use of Filename: http://qi-hw.com/p/wernermisc/8922383 | 19:21 |
qi-bot | [commit] Werner Almesberger: qpkg: rearrange things in prereq.c to free the stack paradigm for other uses http://qi-hw.com/p/wernermisc/d0a1a9e | 19:21 |
qi-bot | [commit] Werner Almesberger: qpkg/prereq.c (prereq): removed confused false error avoidance http://qi-hw.com/p/wernermisc/5a0444f | 19:21 |
qi-bot | [commit] Werner Almesberger: qpkg/prereq.c (resolve): cleaned up the debugging output mechanism http://qi-hw.com/p/wernermisc/9272f50 | 19:21 |
qi-bot | [commit] Werner Almesberger: qpkg: store dependencies and conflicts in file order http://qi-hw.com/p/wernermisc/6c66fa6 | 19:21 |
qi-bot | [commit] Werner Almesberger: qpkg: change prerequisite resolution order to be fully depth-first http://qi-hw.com/p/wernermisc/0229051 | 19:21 |
qi-bot | [commit] Werner Almesberger: qpkg: added detection of cyclic dependencies http://qi-hw.com/p/wernermisc/0bc4b60 | 19:21 |
qi-bot | [commit] Werner Almesberger: qpkg/prereq.c (print_debug, resolve): moved debug output to separate function http://qi-hw.com/p/wernermisc/e1404bb | 19:21 |
qi-bot | [commit] Werner Almesberger: qpkg: option -d to enable debugging at run time, and some cleanup http://qi-hw.com/p/wernermisc/a0c0e85 | 19:21 |
qi-bot | [commit] Werner Almesberger: qpkg: moved comp_versions from prereq.c to id.c http://qi-hw.com/p/wernermisc/dd8bb6e | 19:21 |
qi-bot | [commit] Yauhen Kharuzhy: Add libmpdclient package http://qi-hw.com/p/openwrt-packages/5e68f89 | 21:01 |
qi-bot | [commit] Yauhen Kharuzhy: Fix ncmpc compilation http://qi-hw.com/p/openwrt-packages/70138e9 | 21:01 |
qi-bot | [commit] Xiangfu Liu: add msmtp-queue package. when it goto upstream, we will delete it http://qi-hw.com/p/openwrt-packages/f9cc7d5 | 21:59 |
qi-bot | [commit] Xiangfu Liu: set the default wallpaper to open.png http://qi-hw.com/p/gmenu2x/6773ad7 | 22:43 |
qi-bot | [commit] Xiangfu Liu: cleanup reflash_ben.sh, try to download root.ubi.bz2 first http://qi-hw.com/p/openwrt-xburst/121c7ed | 04:31 |
---|---|---|
qi-bot | [commit] kyak: set "Local" VERSION on manual build http://qi-hw.com/p/openwrt-xburst/5ea3a68 | 04:51 |
qi-bot | [commit] kyak: netsurf - at least shows up. http://qi-hw.com/p/openwrt-packages/22c747e | 06:46 |
qi-bot | [commit] kyak: netsurf: enable freetype http://qi-hw.com/p/openwrt-packages/47eda0b | 07:28 |
qi-bot | [commit] kyak: default config for netsurf http://qi-hw.com/p/openwrt-xburst/4eb4568 | 09:45 |
qi-bot | [commit] kyak: Prepare kernel for keymouse http://qi-hw.com/p/openwrt-xburst/1bcab34 | 09:46 |
qi-bot | [commit] kyak: enable keymouse http://qi-hw.com/p/openwrt-packages/a1a68fc | 09:59 |
qi-bot | [commit] kyak: typo fix http://qi-hw.com/p/openwrt-packages/97542ba | 10:00 |
qi-bot | [commit] kyak: netsurf: add the "close" button to toolbar http://qi-hw.com/p/openwrt-xburst/0438954 | 10:28 |
qi-bot | [commit] Xiangfu Liu: add setfont2 ... to /usr/bin/gmenu2x http://qi-hw.com/p/openwrt-xburst/3bf4717 | 10:34 |
qi-bot | [commit] Xiangfu Liu: reflash_ben.sh: update some info. use bzip2 -d instead of tar xf http://qi-hw.com/p/openwrt-xburst/478bfd6 | 10:34 |
qi-bot | [commit] Xiangfu Liu: Revert "remove <triggerhappy> since it went upstream" http://qi-hw.com/p/openwrt-packages/9c9b62d | 11:05 |
qi-bot | [commit] Xiangfu Liu: don't use HOST input.h, thanks kyak http://qi-hw.com/p/openwrt-packages/43d6002 | 11:05 |
qi-bot | [commit] Xiangfu Liu: triggerhappy: rename it to triggersad, update download URL http://qi-hw.com/p/openwrt-packages/9417998 | 11:05 |
qi-bot | [commit] kyak: replace triggerhappy with triggersad until it's not fixed upstream http://qi-hw.com/p/openwrt-xburst/2caf08f | 11:44 |
qi-bot | [commit] kyak: rename utils/triggersad -> triggersad http://qi-hw.com/p/openwrt-packages/f455a54 | 11:45 |
qi-bot | [commit] kyak: netsurf: update to latest svn (catch focu on startup) http://qi-hw.com/p/openwrt-packages/b09980a | 15:57 |
qi-bot | [commit] Juan64Bits: Adding bases to the code generator. Code text edit, fixing input/output ID control, etc. http://qi-hw.com/p/nn-usb-fpga/2efe106 | 16:21 |
qi-bot | [commit] Xiangfu Liu: add mutt icon to gmenu2x apps list http://qi-hw.com/p/openwrt-xburst/47423bc | 01:37 |
---|---|---|
qi-bot | [commit] kyak: space in tune2fs config.full_system (thanks aisa) http://qi-hw.com/p/openwrt-xburst/dfb90ea | 01:41 |
qi-bot | [commit] kyak: Merge branch 'master' of projects.qi-hardware.com:openwrt-xburst http://qi-hw.com/p/openwrt-xburst/d78e273 | 01:41 |
qi-bot | [commit] kyak: call setfont2 before tetris http://qi-hw.com/p/openwrt-xburst/5698883 | 13:16 |
qi-bot | [commit] David Kühling: minor fix: do not create temporary files in package-directory during build. http://qi-hw.com/p/openwrt-packages/25cc3ef | 15:29 |
qi-bot | [commit] kyak: fix Home/End keys in vim http://qi-hw.com/p/openwrt-xburst/3866039 | 17:04 |
qi-bot | [commit] Werner Almesberger: qpkg/TODO: list of to do items http://qi-hw.com/p/wernermisc/908f6c9 | 19:11 |
qi-bot | [commit] Werner Almesberger: qpkg: added James S. Plank's red-black trees http://qi-hw.com/p/wernermisc/2787a45 | 19:11 |
qi-bot | [commit] Werner Almesberger: qpkg: added simple regression test for red-black trees http://qi-hw.com/p/wernermisc/b4ff969 | 19:11 |
qi-bot | [commit] Werner Almesberger: qpkg: removed non-generic jrb access functions http://qi-hw.com/p/wernermisc/769d315 | 19:11 |
qi-bot | [commit] Werner Almesberger: qpkg: remove Jval http://qi-hw.com/p/wernermisc/7f05c9e | 19:11 |
qi-bot | [commit] Werner Almesberger: qpkg: (jrb) remove _gen suffix, since we removed the non-generic variants http://qi-hw.com/p/wernermisc/cc92c67 | 19:11 |
qi-bot | [commit] Werner Almesberger: qpkg/jrb.h: general code cleanup http://qi-hw.com/p/wernermisc/dec07f3 | 19:11 |
qi-bot | [commit] Werner Almesberger: qpkg/jrb.c: major whitespace readjustment (converted from GNU to K&R style) http://qi-hw.com/p/wernermisc/009f56c | 19:11 |
qi-bot | [commit] Werner Almesberger: qpkg/jrb.c (mk_new_ext): converted from macro to function http://qi-hw.com/p/wernermisc/5a422a4 | 19:11 |
qi-bot | [commit] Werner Almesberger: qpkg: simplify jrb_delete_node and more whitespace cleanup http://qi-hw.com/p/wernermisc/a463773 | 19:11 |
qi-bot | [commit] Werner Almesberger: qpkg/jrb.[ch]: remove trailing spaces http://qi-hw.com/p/wernermisc/7e641d2 | 19:11 |
qi-bot | [commit] Werner Almesberger: qpkg: mention in jrb-related files that they've been heavily edited http://qi-hw.com/p/wernermisc/c060b88 | 19:11 |
qi-bot | [commit] Werner Almesberger: qpkg/jrb.c: reordered recolor and single_rotate and removed prototypes http://qi-hw.com/p/wernermisc/da7a6fe | 19:11 |
qi-bot | [commit] Werner Almesberger: qpkg: renamed "struct jrb_node" to "struct jrb" replaced JRB with "struct jrb *" http://qi-hw.com/p/wernermisc/47abebe | 19:11 |
qi-bot | [commit] Werner Almesberger: qpkg: use -Wmissing-prototypes http://qi-hw.com/p/wernermisc/a8ed4dc | 19:11 |
qi-bot | [commit] Werner Almesberger: qpkg: converted dumb binary trees to red-black trees (in progress) http://qi-hw.com/p/wernermisc/e1814ce | 20:25 |
qi-bot | [commit] Werner Almesberger: qpkg/gobble.c (gobble_buf): initialize pkg->conflicts and pkg->depends http://qi-hw.com/p/wernermisc/af27092 | 20:25 |
qi-bot | [commit] Werner Almesberger: qpkg: converted ID comparison from "struct id *" to "void *" http://qi-hw.com/p/wernermisc/a9f12d5 | 20:25 |
qi-bot | [commit] Werner Almesberger: qpkg/Makefile (jlime): new target to build for the Ben under Jlime http://qi-hw.com/p/wernermisc/0cc1dfc | 20:25 |
qi-bot | [commit] Werner Almesberger: qpkg: use "val" field of jrb nodes instead of keeping one in "struct id" http://qi-hw.com/p/wernermisc/64c70e7 | 20:25 |
qi-bot | [commit] Werner Almesberger: qpkg: optimize duplicate lookup when inserting a new name http://qi-hw.com/p/wernermisc/03c5e4f | 20:25 |
qi-bot | [commit] Werner Almesberger: qpkg/gobble.c (EXPECT): added variant that just skips over expected text http://qi-hw.com/p/wernermisc/ed0281f | 20:35 |
qi-bot | [commit] Werner Almesberger: qpkg/jrb.c: removed unnecessary inclusion of ctype.h and string.h http://qi-hw.com/p/wernermisc/798209f | 20:35 |
qi-bot | [commit] Xiangfu Liu: update gmenu2x http://qi-hw.com/p/openwrt-packages/0a2704c | 03:04 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: add libparserutils http://qi-hw.com/p/openwrt-packages/2b8e304 | 10:57 |
qi-bot | [commit] Xiangfu Liu: add netsurf, direct fb web browser http://qi-hw.com/p/openwrt-packages/22bdc35 | 10:57 |
qi-bot | [commit] Xiangfu Liu: add libhubbub, an HTML5 compliant parsing library http://qi-hw.com/p/openwrt-packages/5ab2226 | 10:57 |
qi-bot | [commit] Xiangfu Liu: add libcss, a CSS parser and selection engine, written in C http://qi-hw.com/p/openwrt-packages/1d2f2bc | 10:57 |
qi-bot | [commit] Xiangfu Liu: mark libcss libhubbub libparserutils netsurf as BROKEN, not finish yet http://qi-hw.com/p/openwrt-packages/1f8d6bd | 10:57 |
qi-bot | [commit] Xiangfu Liu: fix libhubbub, libparserutils compile and install http://qi-hw.com/p/openwrt-packages/59dacaa | 22:53 |
qi-bot | [commit] Xiangfu Liu: add libwapcaplet, a string internment library http://qi-hw.com/p/openwrt-packages/da7e7d1 | 22:53 |
qi-bot | [commit] Xiangfu Liu: fix libcss compile and install http://qi-hw.com/p/openwrt-packages/72bfce5 | 22:53 |
qi-bot | [commit] Xiangfu Liu: [config.full_system] add dosfslabel, resize2fs, sysfsutils, tune2fs http://qi-hw.com/p/openwrt-xburst/5b3819d | 00:57 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: [nethack] [new package] single player dungeon exploration game http://qi-hw.com/p/openwrt-packages/182a82a | 01:15 |
qi-bot | [commit] Xiangfu Liu: add more apps entry in gmenu2x, abook, bc, nightsky, sc, vim http://qi-hw.com/p/openwrt-xburst/08534bd | 02:53 |
qi-bot | [commit] Xiangfu Liu: read the /etc/profile before run gmenu2x http://qi-hw.com/p/gmenu2x/6e5fa8c | 03:11 |
qi-bot | [commit] Xiangfu Liu: [gmenu2x] update, read /etc/profile before run gmenu2x http://qi-hw.com/p/openwrt-packages/dca4939 | 03:12 |
qi-bot | [commit] Xiangfu Liu: update the brightness file path to NanoNote http://qi-hw.com/p/gmenu2x/be9c6b9 | 04:30 |
qi-bot | [commit] Stefan Tomanek: add triggerhappy hotkey daemon http://qi-hw.com/p/openwrt-packages/4dcfd38 | 04:32 |
qi-bot | [commit] Xiangfu Liu: set default backlight to 25% http://qi-hw.com/p/gmenu2x/a4b8aa4 | 04:50 |
qi-bot | [commit] kyak: removed ncurses completely; have ncursesw build http://qi-hw.com/p/openwrt-packages/057dd6a | 05:00 |
qi-bot | [commit] kyak: Merge branch 'master' of projects.qi-hardware.com:openwrt-packages http://qi-hw.com/p/openwrt-packages/dc9a534 | 05:00 |
qi-bot | [commit] Niels: add layer that displays points of interest from a .osm file http://qi-hw.com/p/nanomap/2d6e62a | 05:35 |
qi-bot | [commit] Niels: add monav plugins from http://code.google.com/p/monav/ and use them to calculate routes http://qi-hw.com/p/nanomap/e18428c | 05:35 |
qi-bot | [commit] Niels: draw start and end markers only when they are set http://qi-hw.com/p/nanomap/fd81fcf | 05:35 |
qi-bot | [commit] Niels: emit a signal if the gps device got a fix http://qi-hw.com/p/nanomap/0dd2f33 | 05:35 |
qi-bot | [commit] Niels: draw different symbol if gps device got no fix http://qi-hw.com/p/nanomap/889c3fb | 05:35 |
qi-bot | [commit] Niels: use monav plugin to do address look ups http://qi-hw.com/p/nanomap/a8c6360 | 05:35 |
qi-bot | [commit] Niels: move route marker only if routing information is available for that point http://qi-hw.com/p/nanomap/6c6fabb | 05:35 |
qi-bot | [commit] Niels: do not crash if plugins could not be loaded http://qi-hw.com/p/nanomap/8a33464 | 05:35 |
qi-bot | [commit] Niels: do not crash if no city is selected http://qi-hw.com/p/nanomap/223efe7 | 05:35 |
qi-bot | [commit] Niels: a little start at getting routing directions http://qi-hw.com/p/nanomap/5e06ce0 | 05:35 |
qi-bot | [commit] Niels: draw icons of the points of interest loaded from a .osm file http://qi-hw.com/p/nanomap/bdecafa | 05:35 |
qi-bot | [commit] kyak: added qt4-demos and qt4-examples to full_system http://qi-hw.com/p/openwrt-xburst/dc0a850 | 06:27 |
qi-bot | [commit] kyak: updated gmenu2x to latest git. http://qi-hw.com/p/openwrt-packages/15da1f0 | 06:41 |
qi-bot | [commit] Xiangfu Liu: [gmenu2x] update http://qi-hw.com/p/openwrt-packages/c68f12b | 06:41 |
qi-bot | [commit] Xiangfu Liu: [gmenu2x] update to 20101115 http://qi-hw.com/p/openwrt-packages/812dd90 | 06:41 |
qi-bot | [commit] Xiangfu Liu: [gmenu2x] update, read /etc/profile before run gmenu2x http://qi-hw.com/p/openwrt-packages/1ba8cb6 | 06:41 |
qi-bot | [commit] Mirko Vogt: remove <triggerhappy> since it went upstream http://qi-hw.com/p/openwrt-packages/18ed9b5 | 07:22 |
qi-bot | [commit] Niels: first try to fix building with OpenWRT toolchain that does not include QtCore and QtGui in the include path http://qi-hw.com/p/nanomap/da88ec2 | 08:14 |
qi-bot | [commit] Niels: second try http://qi-hw.com/p/nanomap/88239a2 | 08:22 |
qi-bot | [commit] Xiangfu Liu: add wallpapers from community contributions http://qi-hw.com/p/gmenu2x/7d1a699 | 09:35 |
qi-bot | [commit] Xiangfu Liu: [config.full_system] add nanoterm http://qi-hw.com/p/openwrt-xburst/5a89e81 | 09:55 |
qi-bot | [commit] Xiangfu Liu: remove fn-handle and cmdpad, add triggerhappy http://qi-hw.com/p/openwrt-xburst/63e598b | 10:24 |
qi-bot | [commit] Xiangfu Liu: remove fn-handle http://qi-hw.com/p/openwrt-packages/1cf24a1 | 10:28 |
qi-bot | [commit] Xiangfu Liu: add poweroff.conf for triggerhappy http://qi-hw.com/p/openwrt-xburst/5d74e23 | 10:38 |
qi-bot | [commit] Xiangfu Liu: add Berlin as the NanoMap example maps http://qi-hw.com/p/openwrt-xburst/d5c1bde | 11:10 |
qi-bot | [commit] Xiangfu Liu: add nightsky icon png file http://qi-hw.com/p/openwrt-xburst/7b42d08 | 11:24 |
qi-bot | [commit] Werner Almesberger: usrp/: new tools to run, evaluate, and plot a full frequency scan http://qi-hw.com/p/ben-wpan/3684c07 | 11:52 |
qi-bot | [commit] Werner Almesberger: usrp/README: clarified distance between antennas and fixed typos in examples http://qi-hw.com/p/ben-wpan/b7ad7f2 | 11:52 |
qi-bot | [commit] Werner Almesberger: usrp/fscan: fail if the directory name begins with a dash http://qi-hw.com/p/ben-wpan/e31144f | 11:52 |
qi-bot | [commit] Werner Almesberger: usrp/plscan: instead of `echo ... sed ...`, just use ${n%%.*} http://qi-hw.com/p/ben-wpan/45d5946 | 11:52 |
qi-bot | [commit] Werner Almesberger: usrp/README: described how to perform and evaluate a measurement run http://qi-hw.com/p/ben-wpan/66f6ad6 | 11:52 |
qi-bot | [commit] Werner Almesberger: usrp/plscan: truncate title at the last dot, not the first http://qi-hw.com/p/ben-wpan/59beaba | 12:14 |
qi-bot | [commit] kyak: build abook against ncursesw http://qi-hw.com/p/openwrt-packages/ed2d09c | 14:13 |
qi-bot | [commit] kyak: use more sane 'linux' TERM http://qi-hw.com/p/openwrt-xburst/70c8ce3 | 14:18 |
qi-bot | [commit] kyak: updated Qt keymap http://qi-hw.com/p/openwrt-xburst/5818297 | 14:18 |
qi-bot | [commit] kyak: call setfont2 before starting abook http://qi-hw.com/p/openwrt-xburst/21f6b06 | 14:18 |
qi-bot | [commit] Andres Calderon: BOOKSHELF has been added http://qi-hw.com/p/xue/91c1a69 | 17:21 |
qi-bot | [commit] kyak: asign a working dir for ash-rus http://qi-hw.com/p/openwrt-packages/7265f7c | 03:48 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: [config.full_system] add fsck http://qi-hw.com/p/openwrt-xburst/9b66248 | 08:38 |
qi-bot | [commit] kyak: /etc/banner: fixed noeol; /etc/VERSION was missing http://qi-hw.com/p/openwrt-xburst/646fb82 | 12:08 |
qi-bot | [commit] kyak: added keymap for Qt apps http://qi-hw.com/p/openwrt-xburst/abf3fa4 | 13:31 |
qi-bot | [commit] Werner Almesberger: usrp/fft: one more analysis tool for antenna measurements http://qi-hw.com/p/ben-wpan/489acc4 | 19:19 |
qi-bot | [commit] Werner Almesberger: usrp/range: obtain avg/min/max from a series of values and eliminate outliers http://qi-hw.com/p/ben-wpan/c4d906b | 19:19 |
qi-bot | [commit] Werner Almesberger: usrp/README: description of the preparation for antenna measurements. http://qi-hw.com/p/ben-wpan/cc5090b | 19:19 |
qi-bot | [commit] Mirko Vogt: [ncurses] mark ncurses as broken, since it interferes with http://qi-hw.com/p/openwrt-packages/336e098 | 19:46 |
qi-bot | [commit] Mirko Vogt: add precompiled fontcaches http://qi-hw.com/p/openwrt-xburst/a061664 | 20:46 |
qi-bot | [commit] Xiangfu Liu: [config.full_system] group up it a little http://qi-hw.com/p/openwrt-xburst/3d875b9 | 00:47 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: add nanonote input.conf.nanonote http://qi-hw.com/p/gmenu2x/42ae826 | 04:20 |
qi-bot | [commit] Xiangfu Liu: [gmenu2x] update, update version to 2 http://qi-hw.com/p/openwrt-packages/4cc6ae9 | 04:21 |
qi-bot | [commit] Xiangfu Liu: [gmenu2x] update to 20101115 http://qi-hw.com/p/openwrt-packages/c8743e0 | 04:42 |
qi-bot | [commit] Xiangfu Liu: remove the ntfs package http://qi-hw.com/p/openwrt-xburst/94dd1a9 | 04:44 |
qi-bot | [commit] Xiangfu Liu: remove the useless PKG_INSTALL http://qi-hw.com/p/openwrt-packages/7070616 | 12:19 |
qi-bot | [commit] Jiri Brozovsky: Updated to current version. http://qi-hw.com/p/openwrt-packages/2828400 | 14:26 |
qi-bot | [commit] Jiri Brozovsky: Updated to current version. Now can create PDF tiles with "mandoc -Tpdf" http://qi-hw.com/p/openwrt-packages/c27b445 | 14:26 |
qi-bot | [commit] Xiangfu Liu: [nanoterm] [new package] a terminal for NanoNote http://qi-hw.com/p/openwrt-packages/9124119 | 04:43 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: [stardict] add cache files for dictionary, for speed up when startup http://qi-hw.com/p/openwrt-packages/f179ae2 | 04:57 |
qi-bot | [commit] kyak: added HISTFILE env variable in /etc/profile http://qi-hw.com/p/openwrt-xburst/b07cc5d | 05:30 |
qi-bot | [commit] kyak: Disable syslogd and klogd http://qi-hw.com/p/openwrt-xburst/dcc7d75 | 05:44 |
qi-bot | [commit] kyak: don't need ldd() function if actual ldd is installed http://qi-hw.com/p/openwrt-xburst/c7d6c10 | 05:55 |
qi-bot | [commit] Xiangfu Liu: add [ash] and fix the [bash] entry in gmenu2x http://qi-hw.com/p/openwrt-xburst/b157df2 | 06:07 |
qi-bot | [commit] kyak: added tcl to full_system http://qi-hw.com/p/openwrt-xburst/e5ad3bc | 09:57 |
qi-bot | [commit] kyak: added some config files and enabled busybox stty http://qi-hw.com/p/openwrt-xburst/37dc344 | 09:57 |
qi-bot | [commit] kyak: make sure uClibc won't attempt to get pregenerated locales. http://qi-hw.com/p/openwrt-xburst/36a96a2 | 10:04 |
qi-bot | [commit] Xiangfu Liu: add wallpaper by JaneAndreas, set it default http://qi-hw.com/p/gmenu2x/2c27de3 | 10:06 |
qi-bot | [commit] kyak: 'N' to UCLIBC_HAS_GLIBC_DIGIT_GROUPING http://qi-hw.com/p/openwrt-xburst/8915de3 | 10:40 |
qi-bot | [commit] kyak: some changes to gmenu2x icons http://qi-hw.com/p/openwrt-xburst/ad732f6 | 13:46 |
qi-bot | [commit] kyak: ben-cyrillic: add gmenu2x item (ash-rus) http://qi-hw.com/p/openwrt-packages/e000a19 | 13:54 |
qi-bot | [commit] kyak: make tetris of bsd-games more fittable to screen http://qi-hw.com/p/openwrt-packages/000fba5 | 14:19 |
qi-bot | [commit] Mirko Vogt: remove version string from /etc/banner - include it from /etc/VERSION instead to avoid unneeded redundancy http://qi-hw.com/p/openwrt-xburst/8ae840f | 21:08 |
qi-bot | [commit] Mirko Vogt: Export NanoNote specific global settings affecting QT4 applications. http://qi-hw.com/p/openwrt-xburst/3c816c4 | 21:08 |
qi-bot | [commit] Mirko Vogt: remove version string from /etc/banner - include it from /etc/VERSION instead to avoid unneeded redundancy http://qi-hw.com/p/openwrt-xburst/ced8773 | 21:09 |
qi-bot | [commit] Mirko Vogt: Export NanoNote specific global settings affecting QT4 applications. http://qi-hw.com/p/openwrt-xburst/6815dd8 | 21:09 |
qi-bot | [commit] Xiangfu Liu: add terminal section http://qi-hw.com/p/openwrt-xburst/bcfe91e | 21:37 |
qi-bot | [commit] Xiangfu Liu: keep cleanup the /etc/banner http://qi-hw.com/p/openwrt-xburst/fa1e85f | 21:37 |
qi-bot | [commit] Xiangfu Liu: [gmenu2x] update http://qi-hw.com/p/openwrt-packages/7307bb1 | 21:37 |
qi-bot | [commit] Wolfgang Spraul: merged xbboot.README into config.xbboot http://qi-hw.com/p/openwrt-xburst/3f32dab | 23:16 |
qi-bot | [commit] Wolfgang Spraul: Merge branch 'master' of projects.qi-hardware.com:openwrt-xburst http://qi-hw.com/p/openwrt-xburst/07b6dba | 23:16 |
qi-bot | [commit] kyak: ben-cyrillic: add the required LC_ALL env variable http://qi-hw.com/p/openwrt-packages/5de66bd | 02:46 |
---|---|---|
qi-bot | [commit] Ayla: Added the input.conf file for the Dingoo A320/A330. http://qi-hw.com/p/gmenu2x/e3dffeb | 04:35 |
qi-bot | [commit] Ayla: Merge branch 'master' of projects.qi-hardware.com:gmenu2x http://qi-hw.com/p/gmenu2x/aebd031 | 04:35 |
qi-bot | [commit] Xiangfu Liu: add export SDL_NOMOUSE=1 to script file http://qi-hw.com/p/gmenu2x/aac04da | 04:58 |
qi-bot | [commit] Xiangfu Liu: add ks7010 firmware http://qi-hw.com/p/openwrt-xburst/2e9ef26 | 06:49 |
qi-bot | [commit] Xiangfu Liu: add gmenu2x to inittab, remove init.d/start http://qi-hw.com/p/openwrt-xburst/fce1850 | 06:49 |
qi-bot | [commit] Xiangfu Liu: add a lot of apps entry in gmenu2x http://qi-hw.com/p/openwrt-xburst/ad70ede | 06:49 |
qi-bot | [commit] kyak: lynx: enable SSL and UTF-8 support http://qi-hw.com/p/openwrt-packages/47d1009 | 06:54 |
qi-bot | [commit] Xiangfu Liu: [uboot-xburst] remove debug code http://qi-hw.com/p/openwrt-xburst/ce4de75 | 08:55 |
qi-bot | [commit] kyak: updated gmenu2x to latest git. http://qi-hw.com/p/openwrt-packages/afd6822 | 16:37 |
qi-bot | [commit] Werner Almesberger: The eda-tools welcome the arrival of fpd2pdf http://qi-hw.com/p/eda-tools/4ae9a09 | 16:52 |
qi-bot | [commit] Werner Almesberger: scripts/fpd2pdf (usage): don't call the input files .pdf - they're .fpd ! http://qi-hw.com/p/ben-wpan/bb54864 | 16:52 |
qi-bot | [commit] Werner Almesberger: scripts/fpd2pdf: moved over to eda-tools http://qi-hw.com/p/ben-wpan/6f8665e | 16:52 |
qi-bot | [commit] jow: [backfire] merge r22279 and r22282 (#6011) http://qi-hw.com/p/openwrt-xburst/49bab2b | 02:58 |
---|---|---|
qi-bot | [commit] nbd: ath9k: merge compile error fix from r23912 http://qi-hw.com/p/openwrt-xburst/9fc27c6 | 02:58 |
qi-bot | [commit] hauke: kernel: update from kernel 2.6.32.16 to kernel 2.6.32.25 and refresh patches http://qi-hw.com/p/openwrt-xburst/766ef77 | 02:58 |
qi-bot | [commit] jow: [backfire] merge r23952 http://qi-hw.com/p/openwrt-xburst/6771f8e | 02:58 |
qi-bot | [commit] jow: [backfire] merge r23959-r23961 http://qi-hw.com/p/openwrt-xburst/cee2a41 | 02:58 |
qi-bot | [commit] mirko: [backfire] backport commit 22668 : http://qi-hw.com/p/openwrt-xburst/1b3cadd | 02:58 |
qi-bot | [commit] Xiangfu Liu: this patch add uboot-xburst package http://qi-hw.com/p/openwrt-xburst/b51c58b | 02:58 |
qi-bot | [commit] Xiangfu Liu: some cleanup about xburst target http://qi-hw.com/p/openwrt-xburst/8ab2721 | 02:58 |
qi-bot | [commit] Xiangfu Liu: add ks7010 drivers http://qi-hw.com/p/openwrt-xburst/bc937d1 | 02:58 |
qi-bot | [commit] Xiangfu Liu: copy data folder from history branch http://qi-hw.com/p/openwrt-xburst/704f204 | 02:58 |
qi-bot | [commit] kyak: gitignore vim temporary files (*~) http://qi-hw.com/p/openwrt-xburst/c84c7d2 | 02:58 |
qi-bot | [commit] Xiangfu Liu: add Nanonoe special feeds.conf under data folder http://qi-hw.com/p/openwrt-xburst/c2a3c9b | 02:58 |
qi-bot | [commit] Xiangfu Liu: [config.full_system] add package byobu http://qi-hw.com/p/openwrt-xburst/6d9d9c8 | 02:58 |
qi-bot | [commit] Xiangfu Liu: cleanup the build file http://qi-hw.com/p/openwrt-xburst/0350d27 | 02:58 |
qi-bot | [commit] Mirko Vogt: add <http://downloads.qi-hardware.com/sources> as mirror for source http://qi-hw.com/p/openwrt-xburst/a50d3c5 | 02:58 |
qi-bot | [commit] Xiangfu Liu: adjust the rootfs partiton size to 512MB http://qi-hw.com/p/openwrt-xburst/33490c5 | 02:58 |
qi-bot | [commit] Mirko Vogt: deselect gnuplot since it does not compile (in our tree) http://qi-hw.com/p/openwrt-xburst/c239145 | 02:58 |
qi-bot | [commit] kyak: NAND DATA Partition offset and reflash_ben.sh fixed according to 512 http://qi-hw.com/p/openwrt-xburst/362da1c | 02:58 |
qi-bot | [commit] Xiangfu Liu: [config.full_system] add gcc-mips, fixed in openwrt package: 8dbf61c, tested in build hosts http://qi-hw.com/p/openwrt-xburst/32f2e8b | 02:58 |
qi-bot | [commit] Xiangfu Liu: [linux] support increase/decrease in screen brightness http://qi-hw.com/p/openwrt-xburst/eb8096a | 02:58 |
qi-bot | [commit] Xiangfu Liu: [stardict] add Oxford Englihs -> Chinese dictionary http://qi-hw.com/p/openwrt-packages/a508a75 | 04:21 |
qi-bot | [commit] Xiangfu Liu: this patch add uboot-xburst package http://qi-hw.com/p/openwrt-xburst/293a2a0 | 14:20 |
qi-bot | [commit] Xiangfu Liu: some cleanup about xburst target http://qi-hw.com/p/openwrt-xburst/f187a48 | 14:20 |
qi-bot | [commit] Xiangfu Liu: add ks7010 drivers http://qi-hw.com/p/openwrt-xburst/137de86 | 14:20 |
qi-bot | [commit] Xiangfu Liu: copy data folder from history branch http://qi-hw.com/p/openwrt-xburst/842fa6f | 14:20 |
qi-bot | [commit] kyak: gitignore vim temporary files (*~) http://qi-hw.com/p/openwrt-xburst/7e7437d | 14:20 |
qi-bot | [commit] Xiangfu Liu: add Nanonoe special feeds.conf under data folder http://qi-hw.com/p/openwrt-xburst/f1d5d37 | 14:20 |
qi-bot | [commit] Xiangfu Liu: [config.full_system] add package byobu http://qi-hw.com/p/openwrt-xburst/74016b1 | 14:20 |
qi-bot | [commit] Xiangfu Liu: cleanup the build file http://qi-hw.com/p/openwrt-xburst/ef4105f | 14:20 |
qi-bot | [commit] Mirko Vogt: add <http://downloads.qi-hardware.com/sources> as mirror for source http://qi-hw.com/p/openwrt-xburst/f88bb01 | 14:20 |
qi-bot | [commit] Xiangfu Liu: adjust the rootfs partiton size to 512MB http://qi-hw.com/p/openwrt-xburst/f1c4962 | 14:20 |
qi-bot | [commit] Mirko Vogt: deselect gnuplot since it does not compile (in our tree) http://qi-hw.com/p/openwrt-xburst/589ead1 | 14:20 |
qi-bot | [commit] kyak: NAND DATA Partition offset and reflash_ben.sh fixed according to 512 http://qi-hw.com/p/openwrt-xburst/14ac577 | 14:20 |
qi-bot | [commit] Xiangfu Liu: [config.full_system] add gcc-mips, fixed in openwrt package: 8dbf61c, tested in build hosts http://qi-hw.com/p/openwrt-xburst/1c3892a | 14:20 |
qi-bot | [commit] Xiangfu Liu: [linux] support increase/decrease in screen brightness http://qi-hw.com/p/openwrt-xburst/edfd9f4 | 14:20 |
qi-bot | [commit] kyak: Merge branch 'master' of projects.qi-hardware.com:openwrt-xburst http://qi-hw.com/p/openwrt-xburst/099ec97 | 14:20 |
qi-bot | [commit] kyak: added w3m to config.full_system http://qi-hw.com/p/openwrt-xburst/b404fd5 | 14:20 |
qi-bot | [commit] kyak: enable locale support in uClibc http://qi-hw.com/p/openwrt-xburst/1b577b7 | 15:08 |
qi-bot | [commit] kyak: fbterm iconv patch not needed since uClibc has locale support http://qi-hw.com/p/openwrt-packages/2d7e398 | 15:10 |
qi-bot | [commit] kyak: Merge branch 'master' of projects.qi-hardware.com:openwrt-packages http://qi-hw.com/p/openwrt-packages/334203a | 15:10 |
qi-bot | [commit] kyak: add libncursesw package http://qi-hw.com/p/openwrt-packages/c9435fb | 15:12 |
qi-bot | [commit] kyak: add libncursesw to config.full_system http://qi-hw.com/p/openwrt-xburst/9f6250e | 15:14 |
qi-bot | [commit] Andres Calderon: labels overlaped to pads has been fixed http://qi-hw.com/p/xue/5b6c73e | 18:48 |
qi-bot | [commit] Werner Almesberger: usrp/: move first "step" runs to directory usrp/step/ http://qi-hw.com/p/ben-wpan/d78dd4e | 19:01 |
qi-bot | [commit] Werner Almesberger: usrp/d: cleanup and allow number of samples to be set on command line http://qi-hw.com/p/ben-wpan/38e5b8a | 19:01 |
qi-bot | [commit] Werner Almesberger: usrp/p: cleanup and more command-line control http://qi-hw.com/p/ben-wpan/417ef7b | 19:01 |
qi-bot | [commit] Werner Almesberger: usrp/plot: enable grid and accept center sensitivity from the command line http://qi-hw.com/p/ben-wpan/044c152 | 19:01 |
qi-bot | [commit] Werner Almesberger: usrp/: gave tools slightly more self-explaining names http://qi-hw.com/p/ben-wpan/e76af7d | 19:01 |
qi-bot | [commit] Werner Almesberger: atspi-rssid: for color and geometry, use #defines instead of literals http://qi-hw.com/p/ben-wpan/256da91 | 00:48 |
---|---|---|
qi-bot | [commit] Werner Almesberger: atusb/: connect TST to P0_7 (rework of existing boards) http://qi-hw.com/p/ben-wpan/c45f1bb | 00:48 |
qi-bot | [commit] Werner Almesberger: atusd firmware now supports setting the TST pin. http://qi-hw.com/p/ben-wpan/2337557 | 00:48 |
qi-bot | [commit] Werner Almesberger: libatspi: new function atspi_test_mode to enter test mode http://qi-hw.com/p/ben-wpan/5d63a00 | 00:48 |
qi-bot | [commit] Werner Almesberger: atspi-txrx: option -T <delta_MHz> to emit a constant wave http://qi-hw.com/p/ben-wpan/d4fe027 | 00:48 |
qi-bot | [commit] Werner Almesberger: atspi-txrx: new option -f to set the channel by frequency http://qi-hw.com/p/ben-wpan/1e78135 | 00:48 |
qi-bot | [commit] Werner Almesberger: The Great ATSPI Renaming, part 1: rename atusb firmware files from atspi to atusb http://qi-hw.com/p/ben-wpan/7e71f98 | 08:39 |
qi-bot | [commit] Werner Almesberger: The Great ATSPI Renaming, part 2: rename ATSPI_* identifiers to ATUSB_* http://qi-hw.com/p/ben-wpan/96b6a50 | 08:39 |
qi-bot | [commit] Werner Almesberger: The Great ATSPI Renaming, part 3: rename libatspi.a to libatrf.a http://qi-hw.com/p/ben-wpan/84b61f3 | 08:39 |
qi-bot | [commit] Werner Almesberger: The Great ATSPI Renaming, part 4: rename include/atspi.h to include/atrf.h http://qi-hw.com/p/ben-wpan/cf23ac6 | 08:39 |
qi-bot | [commit] Werner Almesberger: The Great ATSPI Renaming, part 5: rename "struct atspi_driver" to "atrf_driver" http://qi-hw.com/p/ben-wpan/688df97 | 08:39 |
qi-bot | [commit] Werner Almesberger: The Great ATSPI Renaming, part 6: change atrf API from atspi_* to atrf_* http://qi-hw.com/p/ben-wpan/bcd3691 | 08:39 |
qi-bot | [commit] Werner Almesberger: The Great ATSPI Renaming, part 7: rename tools/atspi-* to tools/atrf-* http://qi-hw.com/p/ben-wpan/2873174 | 08:39 |
qi-bot | [commit] Werner Almesberger: The Great ATSPI Renaming, part 8: rename the tools from atspi-* to atrf-* http://qi-hw.com/p/ben-wpan/6ee5142 | 08:39 |
qi-bot | [commit] Werner Almesberger: The Great ATSPI Renaming, part 9: update comments as well http://qi-hw.com/p/ben-wpan/a8a898e | 08:39 |
qi-bot | [commit] Werner Almesberger: lib/atusb.c: fix typo in function name http://qi-hw.com/p/ben-wpan/8093112 | 08:39 |
qi-bot | [commit] Werner Almesberger: atusb.sch: mention that the TST connection is a rework and not in the layout http://qi-hw.com/p/ben-wpan/4d7cb12 | 08:39 |
qi-bot | [commit] Werner Almesberger: The Great ATSPI Renaming, part 10: more title comment fixes http://qi-hw.com/p/ben-wpan/d1953cd | 08:58 |
qi-bot | [commit] Werner Almesberger: The Great ATSPI Renaming, part 11: TODO update and fix script using a tool http://qi-hw.com/p/ben-wpan/7f9488e | 08:58 |
qi-bot | [commit] Werner Almesberger: Various items in CNTR referred to ATSPI/atspi http://qi-hw.com/p/ben-wpan/b2049e7 | 08:58 |
qi-bot | [commit] Juan64Bits: Revisions, Changing M12 holder. http://qi-hw.com/p/xue/d9912a8 | 14:24 |
qi-bot | [commit] Werner Almesberger: atrf-txrx can now run a shell command while emitting a test wave http://qi-hw.com/p/ben-wpan/22288a2 | 21:42 |
qi-bot | [commit] Werner Almesberger: fw/atusb/atusb.c: make the LED flash 1/4 the previous time in test mode http://qi-hw.com/p/ben-wpan/000c087 | 21:42 |
qi-bot | [commit] kyak: abook: now suitable for Ben term size http://qi-hw.com/p/openwrt-packages/f995e57 | 07:32 |
---|---|---|
qi-bot | [commit] Juan64Bits: Updating prototype of SIE code generator. http://qi-hw.com/p/nn-usb-fpga/9d57891 | 14:21 |
qi-bot | [commit] Xiangfu Liu: [linux] support increase/decrease in screen brightness http://qi-hw.com/p/openwrt-xburst/edfd9f4 | 11:50 |
---|---|---|
qi-bot | [commit] kyak: abook: wrapper to change font size prior to start http://qi-hw.com/p/openwrt-packages/6a969be | 12:53 |
qi-bot | [commit] kyak: forgot the wrapper file for abook... http://qi-hw.com/p/openwrt-packages/8e47e36 | 12:55 |
qi-bot | [commit] kyak: abook: use ASCII for drawing boxes http://qi-hw.com/p/openwrt-packages/41b5356 | 14:30 |
qi-bot | [commit] Xiangfu Liu: [config.full_system] add gcc-mips, fixed in openwrt package: 8dbf61c, tested in build hosts http://qi-hw.com/p/openwrt-xburst/1c3892a | 01:13 |
---|---|---|
qi-bot | [commit] Andres Calderon: clean up http://qi-hw.com/p/xue/921c388 | 11:23 |
qi-bot | [commit] Werner Almesberger: Use getopt in atspi-rssi.c http://qi-hw.com/p/ben-wpan/a7a94b8 | 19:06 |
qi-bot | [commit] Werner Almesberger: Added graphical display of RSSI scan results. http://qi-hw.com/p/ben-wpan/0463bbe | 19:06 |
qi-bot | [commit] Werner Almesberger: atspi-rssi/gui.c (gui): exit on keystroke or quit request http://qi-hw.com/p/ben-wpan/e3bae73 | 19:06 |
qi-bot | [commit] Sergey Kvachonok: Make CROSS_COMPILE configure script variable. http://qi-hw.com/p/xburst-tools/6c1baa5 | 20:07 |
qi-bot | [commit] Sergey Kvachonok: Add firmware clean target to automake clean-local. http://qi-hw.com/p/xburst-tools/99b7ed9 | 20:07 |
qi-bot | [commit] Sergey Kvachonok: Add configure cross-compiler check. http://qi-hw.com/p/xburst-tools/6d3e07f | 20:07 |
qi-bot | [commit] Sergey Kvachonok: Minor configure.ac syntax cleanup. http://qi-hw.com/p/xburst-tools/51ec298 | 20:07 |
qi-bot | [commit] Werner Almesberger: Improved chip identification, added C8051F34x support, some cleanup. http://qi-hw.com/p/f32xbase/88fa3ad | 00:55 |
---|---|---|
qi-bot | [commit] kristianpaul: ADC non serious stuff suposed to help on GPS signaling debugging http://qi-hw.com/p/ben-gps-sdr/5a7bacf | 11:29 |
qi-bot | [commit] kristianpaul: Simple gate just for testing cpld http://qi-hw.com/p/ben-gps-sdr/3ef4cef | 11:32 |
qi-bot | [commit] Xiangfu Liu: [gcc-mips] fix compile error in 64bit system. http://qi-hw.com/p/openwrt-packages/30e2a2a | 12:01 |
qi-bot | [commit] Xiangfu Liu: Revert "mark as broken since it does not compile" http://qi-hw.com/p/openwrt-packages/8dbf61c | 12:01 |
qi-bot | [commit] bartbes: Update nlove to new repo version, with working sound http://qi-hw.com/p/openwrt-packages/13054fb | 12:15 |
qi-bot | [commit] Juan64Bits: Some routing and revision. http://qi-hw.com/p/xue/8c6ea43 | 12:38 |
qi-bot | [commit] Werner Almesberger: KiCad dislikes dots in file names: renamed u.fl-receptacle to u-fl-receptacle http://qi-hw.com/p/ben-wpan/7c2542e | 00:25 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ants/: Passive board for antenna testing. http://qi-hw.com/p/ben-wpan/424ddce | 00:25 |
qi-bot | [commit] Werner Almesberger: CAM process for the antenna test boards. http://qi-hw.com/p/ben-wpan/3f28b92 | 00:25 |
qi-bot | [commit] Werner Almesberger: ants/ants.brd: add exclusion zone around ground pad on top layer http://qi-hw.com/p/ben-wpan/e58985d | 00:25 |
qi-bot | [commit] Werner Almesberger: modules/usb_a_plug_smt.fpd: enlarge signal pads by 0.2 mm http://qi-hw.com/p/ben-wpan/f8ff8bb | 02:02 |
qi-bot | [commit] Werner Almesberger: cntr/: version 3 with simplified input circuit. http://qi-hw.com/p/ben-wpan/b7eb4b9 | 02:02 |
qi-bot | [commit] Werner Almesberger: Updated cntr.sch for BOM processing. Fixed omission in atrf.sub http://qi-hw.com/p/ben-wpan/f2ab3cf | 02:13 |
qi-bot | [commit] kyak: NAND DATA Partition offset and reflash_ben.sh fixed according to 512 http://qi-hw.com/p/openwrt-xburst/14ac577 | 03:54 |
qi-bot | [commit] bartbes: Updated nlove Makefile to point to newer revision http://qi-hw.com/p/openwrt-packages/7e2ca97 | 12:53 |
qi-bot | [commit] Werner Almesberger: ants.brd: add guide lines for placement of bottom adhesive http://qi-hw.com/p/ben-wpan/53f2fc7 | 16:15 |
qi-bot | [commit] Werner Almesberger: ants.brd: added ground fill exclusion zone under connector (again ?) http://qi-hw.com/p/ben-wpan/10b4b51 | 16:15 |
qi-bot | [commit] Werner Almesberger: Firmware support for CNTR version 3. http://qi-hw.com/p/ben-wpan/190e8f0 | 16:15 |
qi-bot | [commit] Werner Almesberger: Minor CNTR layout cleanup. http://qi-hw.com/p/ben-wpan/4c90530 | 16:15 |
qi-bot | [commit] Xiangfu Liu: adjust the rootfs partiton size to 512MB http://qi-hw.com/p/openwrt-xburst/f1c4962 | 00:02 |
---|---|---|
qi-bot | [commit] Mirko Vogt: mark as broken since it does not compile http://qi-hw.com/p/openwrt-packages/f4bd1f2 | 12:06 |
qi-bot | [commit] Mirko Vogt: deselect gnuplot since it does not compile (in our tree) http://qi-hw.com/p/openwrt-xburst/589ead1 | 12:08 |
qi-bot | [commit] Werner Almesberger: Print a frequency estimate after each burst. http://qi-hw.com/p/ben-wpan/9361f14 | 14:03 |
qi-bot | [commit] Werner Almesberger: cntr/cntr.c: option -v (report data corruption) was never implemented, oops. http://qi-hw.com/p/ben-wpan/a8d7434 | 14:03 |
qi-bot | [commit] Werner Almesberger: More detailed examination of the input circuit problem. http://qi-hw.com/p/ben-wpan/6d4ea61 | 14:03 |
qi-bot | [commit] Werner Almesberger: Add DFU to BOOKSHELF. Add MMC driver unloading instructions to f32x/README http://qi-hw.com/p/f32xbase/19e87df | 21:03 |
qi-bot | [commit] Werner Almesberger: Added footprint for U.FL (micro coax) receptacle. http://qi-hw.com/p/ben-wpan/e6c8818 | 21:24 |
qi-bot | [commit] Werner Almesberger: cntr/fw/include/cntr/usb-ids.h was never checked in. Oops ! http://qi-hw.com/p/ben-wpan/c28ab2c | 21:42 |
---|---|---|
qi-bot | [commit] Werner Almesberger: CAM setup update. Local relevance only. http://qi-hw.com/p/ben-wpan/0fc2960 | 21:42 |
qi-bot | [commit] Werner Almesberger: Support design version 2 in the boot loader. http://qi-hw.com/p/ben-wpan/188bdb8 | 21:42 |
qi-bot | [commit] Werner Almesberger: cntr/README update: name clarification and bugs list. http://qi-hw.com/p/ben-wpan/c91658e | 21:42 |
qi-bot | [commit] Werner Almesberger: include/cntr/crc32.c was lost in the great involuntary purge. Add a dummy. http://qi-hw.com/p/ben-wpan/f5388ca | 21:42 |
qi-bot | [commit] Werner Almesberger: Adapted firmware for V2 hardware. http://qi-hw.com/p/ben-wpan/4e568b0 | 21:42 |
qi-bot | [commit] Werner Almesberger: Document that the input circuit does not reach the design frequency (3 MHz) yet. http://qi-hw.com/p/ben-wpan/8cb17bb | 21:42 |
qi-bot | [commit] Werner Almesberger: Added burst counter mode to cntr tool, plus assorted small improvements. http://qi-hw.com/p/ben-wpan/df1706f | 21:42 |
qi-bot | [commit] Werner Almesberger: cntr/README: cntr -r always returns an error, so we cannot use it with && http://qi-hw.com/p/ben-wpan/43f0bce | 21:42 |
qi-bot | [commit] Juan64Bits: Adding M[0] M[1] configuration and fpga crystal http://qi-hw.com/p/xue/ca69a54 | 22:14 |
qi-bot | [commit] Mirko Vogt: add <http://downloads.qi-hardware.com/sources> as mirror for source http://qi-hw.com/p/openwrt-xburst/f88bb01 | 23:26 |
qi-bot | [commit] Juan64Bits: Revisions http://qi-hw.com/p/xue/4376de3 | 00:20 |
---|
qi-bot | [commit] Xiangfu Liu: [gcal] update to 3.6, thanks to Otmar Struwe http://qi-hw.com/p/openwrt-packages/23a5694 | 02:59 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: [byobu] new package,a multi-panel screens tools http://qi-hw.com/p/openwrt-packages/a859251 | 04:19 |
qi-bot | [commit] Xiangfu Liu: [byobu] new package,a multi-panel screens tools http://qi-hw.com/p/openwrt-packages/733b57d | 04:36 |
qi-bot | [commit] Xiangfu Liu: [config.full_system] add package byobu http://qi-hw.com/p/openwrt-xburst/74016b1 | 04:41 |
qi-bot | [commit] Xiangfu Liu: cleanup the build file http://qi-hw.com/p/openwrt-xburst/ef4105f | 05:23 |
qi-bot | [commit] Werner Almesberger: Moved usd-card.lib over from f32xbase http://qi-hw.com/p/kicad-libs/cf2f4d6 | 10:06 |
qi-bot | [commit] Werner Almesberger: Moved c2ben/components/usd-card.lib to kicad-libs project http://qi-hw.com/p/f32xbase/2951f96 | 10:06 |
qi-bot | [commit] Werner Almesberger: Added top-level Makefile, for convenience. http://qi-hw.com/p/kicad-libs/7e3bcd0 | 11:19 |
qi-bot | [commit] Werner Almesberger: ext/: added uSD extender board (draft) http://qi-hw.com/p/ben-blinkenlights/49c76e0 | 11:19 |
qi-bot | [commit] Xiangfu Liu: [config.full_system] add nupdf http://qi-hw.com/p/openwrt-xburst/0defcc5 | 08:16 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: [nupdf] fix the static path bug. thanks Werner http://qi-hw.com/p/openwrt-packages/d7b3e28 | 10:00 |
qi-bot | [commit] Xiangfu Liu: remove the /etc/VERSION file. this file always generate by build scripts http://qi-hw.com/p/openwrt-xburst/f610bc6 | 10:23 |
qi-bot | [commit] Xiangfu Liu: copy data folder from history branch http://qi-hw.com/p/openwrt-xburst/842fa6f | 10:48 |
qi-bot | [commit] kyak: gitignore vim temporary files (*~) http://qi-hw.com/p/openwrt-xburst/7e7437d | 10:48 |
qi-bot | [commit] Xiangfu Liu: add Nanonoe special feeds.conf under data folder http://qi-hw.com/p/openwrt-xburst/f1d5d37 | 10:48 |
qi-bot | [commit] Juan64Bits: Revition... http://qi-hw.com/p/xue/2db4e52 | 18:51 |
qi-bot | [commit] Juan64Bits: Revition... http://qi-hw.com/p/xue/a42266b | 18:52 |
qi-bot | [commit] Werner Almesberger: Introducing cameo, a toolbox of CAM operations. http://qi-hw.com/p/cae-tools/0bc7806 | 19:35 |
qi-bot | [commit] Werner Almesberger: cameo: detect and adjust handedness http://qi-hw.com/p/cae-tools/54d8549 | 19:35 |
qi-bot | [commit] Werner Almesberger: Corrected math for offsets to work also for angles different from 90 degrees. http://qi-hw.com/p/cae-tools/5c9e7d5 | 19:35 |
qi-bot | [commit] Werner Almesberger: Enable more compiler warnings. Some cleanup. http://qi-hw.com/p/cae-tools/d465acb | 19:35 |
qi-bot | [commit] Werner Almesberger: Accept multiple paths and distinguish between inner paths and the outer path. http://qi-hw.com/p/cae-tools/17afa3e | 19:35 |
qi-bot | [commit] Werner Almesberger: Added override (in gnuplot file) for inside/outside path detection. http://qi-hw.com/p/cae-tools/d77b4c8 | 19:35 |
qi-bot | [commit] Werner Almesberger: Dogbone notches are now optional and can be set in the gnuplot file. http://qi-hw.com/p/cae-tools/b47ef75 | 19:35 |
qi-bot | [commit] Werner Almesberger: cameo/path.c (path_add_point): ignore duplicate points http://qi-hw.com/p/cae-tools/ffc908a | 19:35 |
qi-bot | [commit] Werner Almesberger: Make toolpath cameo-friendly and use cameo for tool size compensation. http://qi-hw.com/p/ben-wpan/9103ae0 | 19:35 |
qi-bot | [commit] kyak: 8 bit support in readline-aware programs http://qi-hw.com/p/openwrt-xburst/df5f767 | 08:00 |
---|---|---|
qi-bot | [commit] kyak: gmenu2x: catch up with the latest git version, input.conf has changed. http://qi-hw.com/p/openwrt-packages/44b60e7 | 09:57 |
qi-bot | [commit] Xiangfu Liu: [keymouse] new package http://qi-hw.com/p/openwrt-packages/9f1726e | 11:01 |
qi-bot | [commit] Erwin Lopez: Added .bit with hbridge pins and with testing pins http://qi-hw.com/p/sie-ceimtun/551a96e | 13:26 |
qi-bot | [commit] Erwin Lopez: Pins corrected again http://qi-hw.com/p/sie-ceimtun/0345656 | 15:15 |
qi-bot | [commit] Erwin Lopez: Yet another .bit fix http://qi-hw.com/p/sie-ceimtun/4618f64 | 21:59 |
qi-bot | [commit] Werner Almesberger: cntr/cam/: added PCB-cutting process http://qi-hw.com/p/ben-wpan/1702234 | 23:02 |
qi-bot | [commit] bartbes: Updated to new version of nlove (and now uses hg repo) http://qi-hw.com/p/openwrt-packages/c6552a1 | 06:38 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: Revert "Replace OpenWrt banner with a custom NanoNote banner." http://qi-hw.com/p/openwrt-xburst/7000e6e | 10:09 |
qi-bot | [commit] Xiangfu Liu: move the NanoNote banner to data/ folder http://qi-hw.com/p/openwrt-xburst/70a8137 | 10:09 |
qi-bot | [commit] Xiangfu Liu: move NanoNote special files to data/ folder http://qi-hw.com/p/openwrt-xburst/d5e9dcd | 10:17 |
qi-bot | [commit] Xiangfu Liu: move NanoNote special files(build, reflash_ben.sh) to data/ folder http://qi-hw.com/p/openwrt-xburst/cae1615 | 10:26 |
qi-bot | [commit] kyak: ben-cyrillic: updated some glyphs, added pre-png file http://qi-hw.com/p/openwrt-packages/0be554f | 15:20 |
qi-bot | [commit] Werner Almesberger: boom/Makefile: new target "db" to build or update the database http://qi-hw.com/p/eda-tools/6ba3a56 | 18:29 |
qi-bot | [commit] Werner Almesberger: manu/Makefile: run a recursive make on all subdirectories http://qi-hw.com/p/eda-tools/a6c65c7 | 18:29 |
qi-bot | [commit] Erwin Lopez: Uploaded the first Beta to test in the development group http://qi-hw.com/p/sie-ceimtun/8f2a9cc | 19:36 |
qi-bot | [commit] Erwin Lopez: Changed src in Beta with example to all 4 PWM at 100% http://qi-hw.com/p/sie-ceimtun/cc225fc | 23:28 |
qi-bot | [commit] Wolfgang Spraul: removed R16 /250V indicator until we are more clear http://qi-hw.com/p/mmone-jtag-serial-cable/42f1909 | 07:39 |
---|
qi-bot | [commit] Xiangfu Liu: autologin to system, thanks to Juan http://qi-hw.com/p/openwrt-xburst/93f45c1 | 03:06 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: autologin to system at tty1, thanks to Juan http://qi-hw.com/p/openwrt-xburst/6883819 | 03:33 |
qi-bot | [commit] Wolfgang Spraul: partial boom update http://qi-hw.com/p/mmone-jtag-serial-cable/a8f8e8a | 03:39 |
qi-bot | [commit] Xiangfu Liu: [uboot-xburst] move lcd init more early http://qi-hw.com/p/openwrt-xburst/a510aa3 | 23:54 |
qi-bot | [commit] Xiangfu Liu: [uboot-xburst] cleanup the lcm init http://qi-hw.com/p/openwrt-xburst/3b8d551 | 06:03 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: fix the gpm94b0 init in zImage http://qi-hw.com/p/openwrt-xburst/d8efb94 | 07:23 |
qi-bot | [commit] Juan64Bits: Adding RFM22b Example. http://qi-hw.com/p/nn-usb-fpga/b0be121 | 10:18 |
qi-bot | [commit] Juan64Bits: Adding RFM22b Example. http://qi-hw.com/p/nn-usb-fpga/d302857 | 10:49 |
qi-bot | [commit] Yanjun Luo: Change R16 to 1206 footprint, and support 300V. http://qi-hw.com/p/mmone-jtag-serial-cable/0fed69d | 11:11 |
qi-bot | [commit] Xiangfu Liu: [config.full_system] add gnuplot http://qi-hw.com/p/openwrt-xburst/9869df5 | 21:56 |
qi-bot | [commit] Yanjun Luo: Update usb_jtag.lst http://qi-hw.com/p/mmone-jtag-serial-cable/f9a1159 | 11:47 |
---|---|---|
qi-bot | [commit] Yanjun Luo: Merge branch 'master' of projects.qi-hardware.com:mmone-jtag-serial-cable http://qi-hw.com/p/mmone-jtag-serial-cable/c3c13a6 | 11:47 |
qi-bot | [commit] Yanjun Luo: Remove C2/C4/R3/R4, high speed works now. http://qi-hw.com/p/mmone-jtag-serial-cable/87b791d | 11:47 |
qi-bot | [commit] Lars-Peter Clausen: Framebuffer notifier: Call notifier callbacks prior to blanking the screen http://qi-hw.com/p/qi-kernel/b50a70e | 14:17 |
qi-bot | [commit] Lars-Peter Clausen: POWER: jz4740-battery: Protect against concurrent battery readings http://qi-hw.com/p/qi-kernel/ace61dc | 14:17 |
qi-bot | [commit] Werner Almesberger: Cleaned up component values in cntr schematics. http://qi-hw.com/p/ben-wpan/021bb00 | 00:01 |
---|---|---|
qi-bot | [commit] Werner Almesberger: Assorted termination simulation cleanup. http://qi-hw.com/p/ben-wpan/2e742d9 | 00:01 |
qi-bot | [commit] Werner Almesberger: bom/Makefile generalization http://qi-hw.com/p/ben-wpan/6e0abca | 00:01 |
qi-bot | [commit] Werner Almesberger: Added BOM data for "cntr" sub-project. http://qi-hw.com/p/ben-wpan/69ddbf6 | 00:01 |
qi-bot | [commit] Werner Almesberger: Take "pads" and "stdpass" modules from kicad-libs and remove local copy. http://qi-hw.com/p/ben-wpan/a2e91cf | 00:01 |
qi-bot | [commit] Werner Almesberger: Revert TVS size reduction. We're not ready for it yet. http://qi-hw.com/p/ben-wpan/57874cf | 00:01 |
qi-bot | [commit] Werner Almesberger: Great renaming: atrf/wpan-atrf* becomes atusb/atusb* http://qi-hw.com/p/ben-wpan/b493f09 | 00:01 |
qi-bot | [commit] Werner Almesberger: Cleanup of values in atusb/*.sch http://qi-hw.com/p/ben-wpan/9d6906d | 00:01 |
qi-bot | [commit] Werner Almesberger: atusb/atrf.sch (X1): don't explicitly say that the tolerance is a maximum http://qi-hw.com/p/ben-wpan/a0f0781 | 00:01 |
qi-bot | [commit] Werner Almesberger: Added BOM data for "atusb" sub-project. http://qi-hw.com/p/ben-wpan/01a9f2c | 00:01 |
qi-bot | [commit] kyak: gitignore vim temporary files (*~) http://qi-hw.com/p/openwrt-xburst/51502be | 03:23 |
qi-bot | [commit] Werner Almesberger: modules/Makefile (MODULES): belatedly remove "pads" and "stdpass". Oops. http://qi-hw.com/p/ben-wpan/e3c8507 | 07:45 |
qi-bot | [commit] Werner Almesberger: Added Molex 0480371000 USB A plug (SMT) http://qi-hw.com/p/ben-wpan/f73f0a9 | 07:45 |
qi-bot | [commit] Werner Almesberger: SOT-323 footprint for MMST3904 NPN transistor (use NPN standard symbol) http://qi-hw.com/p/ben-wpan/7dd3d1a | 07:45 |
qi-bot | [commit] Werner Almesberger: Major redesign of "cntr" circuit. http://qi-hw.com/p/ben-wpan/e9147b0 | 07:45 |
qi-bot | [commit] Werner Almesberger: Cleaned up board outline and ground routing. http://qi-hw.com/p/ben-wpan/2ad54bf | 17:49 |
qi-bot | [commit] Werner Almesberger: Use "standard" 2:1 pad to hole ratio for USB connector shield. http://qi-hw.com/p/ben-wpan/8cd7acd | 17:49 |
qi-bot | [commit] Werner Almesberger: Corrected MMCX connector fields. http://qi-hw.com/p/ben-wpan/fca53a3 | 17:49 |
qi-bot | [commit] Werner Almesberger: Added cntr's MMCX jack, USB A jack, and NPN transistor to BOM. http://qi-hw.com/p/ben-wpan/86b1163 | 17:49 |
qi-bot | [commit] Wolfgang Spraul: changed C16 from 480pF to more common 470pF http://qi-hw.com/p/mmone-jtag-serial-cable/f6f8f5c | 07:09 |
---|---|---|
qi-bot | [commit] David Kühling: package building fix: do not run postinst image update on host http://qi-hw.com/p/openwrt-packages/89d817b | 07:55 |
qi-bot | [commit] David Kühling: revert some package debugging stuff that accidentally got committed http://qi-hw.com/p/openwrt-packages/7b20736 | 08:03 |
qi-bot | [commit] Wolfgang Spraul: added BOOKSHELF http://qi-hw.com/p/mmone-jtag-serial-cable/f073fa8 | 09:41 |
qi-bot | [commit] Wolfgang Spraul: BOOKSHELF update http://qi-hw.com/p/mmone-jtag-serial-cable/28edd25 | 09:41 |
qi-bot | [commit] Lars-Peter Clausen: defconfig update http://qi-hw.com/p/qi-kernel/43947c3 | 10:53 |
qi-bot | [commit] Lars-Peter Clausen: Revert "dma sg" http://qi-hw.com/p/qi-kernel/5627252 | 10:53 |
qi-bot | [commit] Werner Almesberger: Added (partially incorrect, see INFO) footprint of F MMCX board edge connector http://qi-hw.com/p/ben-wpan/6668a6d | 12:09 |
qi-bot | [commit] Werner Almesberger: cntr/term/term.sch: simulation of impedance-matched termination circuit http://qi-hw.com/p/ben-wpan/4176541 | 12:09 |
qi-bot | [commit] Werner Almesberger: boom/manu/Makefile.common: rm -f is enough, no need for -rf http://qi-hw.com/p/eda-tools/fa21900 | 12:11 |
qi-bot | [commit] Axel Lin: mfd: Fix jz4740_adc_set_enabled http://qi-hw.com/p/qi-kernel/fa4e9d6 | 13:00 |
qi-bot | [commit] Axel Lin: jz4740-battery: Add missing kfree(jz_battery) in jz_battery_remove() http://qi-hw.com/p/qi-kernel/6816d66 | 13:00 |
qi-bot | [commit] Wolfgang Spraul: added some TODO items http://qi-hw.com/p/mmone-jtag-serial-cable/659de36 | 21:25 |
qi-bot | [commit] Werner Almesberger: Added modules/INFO and AUTHORS. http://qi-hw.com/p/kicad-libs/6bb7d7b | 22:43 |
qi-bot | [commit] Xiangfu Liu: [uboot-xbust] fixed the [src] overflow when http://qi-hw.com/p/openwrt-xburst/d0d0131 | 23:35 |
qi-bot | [commit] Wolfgang Spraul: changed to cheaper 18pF crystal (was 12pF before), clarified X1 fields, changed C1/C3 to 33pF to match the crystal http://qi-hw.com/p/mmone-jtag-serial-cable/7f56822 | 01:39 |
---|---|---|
qi-bot | [commit] Werner Almesberger: More rm -rf to rm -f changes. http://qi-hw.com/p/ben-wpan/850e9fc | 07:41 |
qi-bot | [commit] Wolfgang Spraul: added very first boom support files http://qi-hw.com/p/mmone-jtag-serial-cable/a05bb84 | 08:11 |
qi-bot | [commit] kristianpaul: Some blink tests http://qi-hw.com/p/ben-gps-sdr/6888e6f | 22:01 |
qi-bot | [commit] kristianpaul: updated readme and added map info http://qi-hw.com/p/ben-gps-sdr/b259972 | 22:03 |
qi-bot | [commit] Wolfgang Spraul: tried to standardize components values in schematics http://qi-hw.com/p/mmone-jtag-serial-cable/39ebc84 | 02:10 |
---|---|---|
qi-bot | [commit] Wolfgang Spraul: cleaner resistor values http://qi-hw.com/p/mmone-jtag-serial-cable/3ce7c30 | 02:32 |
qi-bot | [commit] kyak: qijoe is now known as joe-full http://qi-hw.com/p/openwrt-xburst/f2065c4 | 02:54 |
qi-bot | [commit] Xiangfu Liu: cleanup scripts/build a little. make it save un-commit stuff by git stash http://qi-hw.com/p/openwrt-xburst/1ceee39 | 03:12 |
qi-bot | [commit] Werner Almesberger: Include gpio-s3c24xx.h in gpio-s3c24xx.c http://qi-hw.com/p/f32xbase/df9fb5c | 03:42 |
qi-bot | [commit] Werner Almesberger: c2usb/cam/pcb.pl: fix bogus tool parameters http://qi-hw.com/p/f32xbase/b1d1fcc | 03:42 |
qi-bot | [commit] Werner Almesberger: Small board adjustments, mainly to improve room for isolation. http://qi-hw.com/p/f32xbase/8325a06 | 03:42 |
qi-bot | [commit] kyak: removed myself from Makefile header http://qi-hw.com/p/openwrt-packages/05e38ea | 05:35 |
qi-bot | [commit] kyak: nupdf: initial port http://qi-hw.com/p/openwrt-packages/8bcbadf | 12:18 |
qi-bot | [commit] Werner Almesberger: Cleaned up command-line parsing. Added option -n to disable target power. http://qi-hw.com/p/f32xbase/e614d15 | 13:51 |
qi-bot | [commit] Werner Almesberger: Changed default target to "ben" and added Ben upload. http://qi-hw.com/p/f32xbase/13aa36b | 13:51 |
qi-bot | [commit] kyak: Red arrow+BackSpace now indeed works as Delete http://qi-hw.com/p/openwrt-xburst/2f3b198 | 16:14 |
qi-bot | [commit] kyak: ben-cyrillic: keymap changed for altgr+bksp to act as Delete http://qi-hw.com/p/openwrt-packages/4464376 | 16:21 |
qi-bot | [commit] Xiangfu Liu: override dh_auto_clean, use make spotless instread http://qi-hw.com/p/fped/19ffb4d | 00:31 |
---|---|---|
qi-bot | [commit] Werner Almesberger: c2ben/c2ben.brd: changed track width from 8 to 10 mil http://qi-hw.com/p/f32xbase/66a929a | 02:11 |
qi-bot | [commit] Werner Almesberger: boom/boom-config.in: complain if invoked without argument (reported by Wolfgang http://qi-hw.com/p/eda-tools/8bf21d8 | 02:21 |
qi-bot | [commit] Werner Almesberger: boom/dist/dk/Makefile: changed rm -rf to rm -f (reported by Wolfgang Spraul) http://qi-hw.com/p/eda-tools/ce1d269 | 06:43 |
qi-bot | [commit] Werner Almesberger: Prepare abstraction of C2 communication. http://qi-hw.com/p/f32xbase/ab35c6b | 09:06 |
qi-bot | [commit] Werner Almesberger: Support different targets. (Openmoko GTA01/02 with Dbgv3, soon c2ben.) http://qi-hw.com/p/f32xbase/de75051 | 09:06 |
qi-bot | [commit] Werner Almesberger: Switched from four-spaces to one-tab indentation. http://qi-hw.com/p/f32xbase/3bbf318 | 09:06 |
qi-bot | [commit] Xiangfu Liu: add ghostscript to Build-Depends http://qi-hw.com/p/fped/708230f | 10:23 |
qi-bot | [commit] Juan64Bits: Routing VCCO2 source. http://qi-hw.com/p/xue/a7d01af | 16:27 |
qi-bot | [commit] Lars-Peter Clausen: Add jz4740 udc driver http://qi-hw.com/p/qi-kernel/e575683 | 17:52 |
qi-bot | [commit] Lars-Peter Clausen: Add ili8960 lcd driver http://qi-hw.com/p/qi-kernel/a74358d | 17:52 |
qi-bot | [commit] Lars-Peter Clausen: li http://qi-hw.com/p/qi-kernel/f8359db | 17:52 |
qi-bot | [commit] Lars-Peter Clausen: Add gpio chager driver http://qi-hw.com/p/qi-kernel/016d98c | 17:52 |
qi-bot | [commit] Lars-Peter Clausen: MIPS: JZ4740: qi_lb60: Add gpio-charger device http://qi-hw.com/p/qi-kernel/22f28f7 | 17:52 |
qi-bot | [commit] Lars-Peter Clausen: Add n516 board support http://qi-hw.com/p/qi-kernel/3c4c223 | 17:52 |
qi-bot | [commit] Lars-Peter Clausen: n516 http://qi-hw.com/p/qi-kernel/0632d29 | 17:52 |
qi-bot | [commit] Lars-Peter Clausen: Add n526 board support http://qi-hw.com/p/qi-kernel/f40825a | 17:52 |
qi-bot | [commit] Lars-Peter Clausen: n526 http://qi-hw.com/p/qi-kernel/08db3d4 | 17:52 |
qi-bot | [commit] Lars-Peter Clausen: Add N516 sound SoC board driver http://qi-hw.com/p/qi-kernel/ccfcd16 | 17:52 |
qi-bot | [commit] Lars-Peter Clausen: Add N526 sound SoC board driver http://qi-hw.com/p/qi-kernel/a70e08a | 17:52 |
qi-bot | [commit] Lars-Peter Clausen: i2c: Add i2c driver for JZ47XX SoCs http://qi-hw.com/p/qi-kernel/4057d1c | 17:52 |
qi-bot | [commit] Lars-Peter Clausen: MIPS: JZ4740: Fix i2c driver name. http://qi-hw.com/p/qi-kernel/f5721fa | 17:52 |
qi-bot | [commit] Lars-Peter Clausen: MIPS: JZ4740: Add id800wt board http://qi-hw.com/p/qi-kernel/79efed5 | 17:52 |
qi-bot | [commit] Lars-Peter Clausen: MFD: jz4740-adc: Add support for the touchscreen part of the adc unit http://qi-hw.com/p/qi-kernel/be85350 | 17:52 |
qi-bot | [commit] Lars-Peter Clausen: input: Add touchscreen driver for the JZ4740 SoC http://qi-hw.com/p/qi-kernel/734fd6c | 17:52 |
qi-bot | [commit] Lars-Peter Clausen: qi_lb60: Don't use 3-wire spi mode for the display for now http://qi-hw.com/p/qi-kernel/998c2af | 17:52 |
qi-bot | [commit] Lars-Peter Clausen: qi_lb60: Fix gpio for the 6th row of the keyboard matrix http://qi-hw.com/p/qi-kernel/5dd1253 | 17:52 |
qi-bot | [commit] Lars-Peter Clausen: dma sg http://qi-hw.com/p/qi-kernel/be6724d | 17:52 |
qi-bot | [commit] Lars-Peter Clausen: Add defconfig http://qi-hw.com/p/qi-kernel/cbf420a | 17:52 |
qi-bot | [commit] xiangfu: mark ncmpc as BROKEN, http://qi-hw.com/p/openwrt-packages/f859257 | 17:57 |
qi-bot | [commit] Xiangfu Liu: remove ncmpc since it mark as BROKEN http://qi-hw.com/p/openwrt-xburst/dd29d39 | 18:00 |
qi-bot | [commit] Werner Almesberger: Renamed gpio.* to gpio-s3c24xx.* http://qi-hw.com/p/f32xbase/3c9abdc | 19:18 |
qi-bot | [commit] Werner Almesberger: Moved C2 bitbang functions from c2-om.c to (#included) c2-bitbang.c http://qi-hw.com/p/f32xbase/6a4da0e | 19:18 |
qi-bot | [commit] Werner Almesberger: Labeled the control signals with the Ben's GPIOs http://qi-hw.com/p/f32xbase/4f74357 | 19:18 |
qi-bot | [commit] Werner Almesberger: Don't call gpio_init in c2_init, so that we can do additional setup work before http://qi-hw.com/p/f32xbase/80a0152 | 19:18 |
qi-bot | [commit] Werner Almesberger: f32x: added support for the c2ben adapter http://qi-hw.com/p/f32xbase/bb600da | 19:18 |
qi-bot | [commit] Juan64Bits: First commit for sie code generator project. http://qi-hw.com/p/nn-usb-fpga/32a206d | 21:32 |
qi-bot | [commit] xiangfu: add SDL_ttf freetype to LIBS http://qi-hw.com/p/imgv/933f92b | 01:23 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: - [imgv] update to commit 933f92b http://qi-hw.com/p/openwrt-packages/f6c0b2a | 01:30 |
qi-bot | [commit] Xiangfu Liu: add new packages from openwrt-package.git http://qi-hw.com/p/openwrt-xburst/d60b51c | 03:53 |
qi-bot | [commit] Xiangfu Liu: [ncmpc] update to 0.18, update the download and home URL http://qi-hw.com/p/openwrt-packages/8b84036 | 03:54 |
qi-bot | [commit] Xiangfu Liu: [joe-full] renmae qijoe to joe-full http://qi-hw.com/p/openwrt-packages/25d68f8 | 03:54 |
qi-bot | [commit] Werner Almesberger: Added licensing information and a bit more documentation to schhist. http://qi-hw.com/p/eda-tools/853ede9 | 07:23 |
qi-bot | [commit] Werner Almesberger: Added README and licensing information to boom. http://qi-hw.com/p/eda-tools/d2b53ac | 07:23 |
qi-bot | [commit] Werner Almesberger: dsv/dsv: added copyright notice. http://qi-hw.com/p/eda-tools/5e4b41a | 07:23 |
qi-bot | [commit] Werner Almesberger: Added README with an overview of the sub-projects. http://qi-hw.com/p/eda-tools/b195195 | 07:26 |
qi-bot | [commit] Werner Almesberger: Added README with an overview of the sub-projects. http://qi-hw.com/p/eda-tools/ba891c8 | 07:26 |
qi-bot | [commit] Wolfgang Spraul: moved some components and modules to the right place http://qi-hw.com/p/mmone-jtag-serial-cable/fb677cc | 08:45 |
qi-bot | [commit] Xiangfu Liu: - build ben-cyrillic as package http://qi-hw.com/p/openwrt-xburst/5fd7144 | 08:48 |
qi-bot | [commit] Wolfgang Spraul: Removed system .dcm files that had no original content. http://qi-hw.com/p/mmone-jtag-serial-cable/d70f2ba | 10:08 |
qi-bot | [commit] Wolfgang Spraul: trying to remove some system symbols, see whether schhist shows me any diff... http://qi-hw.com/p/mmone-jtag-serial-cable/7290c89 | 10:08 |
qi-bot | [commit] Wolfgang Spraul: removed unneeded interface library http://qi-hw.com/p/mmone-jtag-serial-cable/2f3d6d4 | 10:26 |
qi-bot | [commit] Wolfgang Spraul: partial cleanup of device.lib http://qi-hw.com/p/mmone-jtag-serial-cable/5f2947c | 10:26 |
qi-bot | [commit] Wolfgang Spraul: switched to system device lib http://qi-hw.com/p/mmone-jtag-serial-cable/2367e8c | 10:41 |
qi-bot | [commit] Wolfgang Spraul: switched to system conn library http://qi-hw.com/p/mmone-jtag-serial-cable/2b005fd | 10:41 |
qi-bot | [commit] Werner Almesberger: Renamed hw/ to c2usb/, to make room for other hardware. http://qi-hw.com/p/f32xbase/8eaef6b | 10:54 |
qi-bot | [commit] Werner Almesberger: c2usb/c2usb.sch: mark design as suspended, due to FT232 being unfit for project http://qi-hw.com/p/f32xbase/07e9667 | 10:54 |
qi-bot | [commit] Wolfgang Spraul: renamed CRYSTAL symbol away from system library, deleted old netlist http://qi-hw.com/p/mmone-jtag-serial-cable/bbf48da | 10:55 |
qi-bot | [commit] Wolfgang Spraul: found 93C46 in usb_jtag-cache.lib, put it in a proper place http://qi-hw.com/p/mmone-jtag-serial-cable/916f7fd | 11:25 |
qi-bot | [commit] Werner Almesberger: Moved pads.fpd (from f32xbase/c2usb and ben-wpan) here. http://qi-hw.com/p/kicad-libs/a97325c | 12:57 |
qi-bot | [commit] Werner Almesberger: Removed local copy of pads.fpd from c2usb http://qi-hw.com/p/f32xbase/7829d4d | 19:17 |
qi-bot | [commit] Werner Almesberger: c2ben/: initial commit of passive C2 adapter board for the Ben's uSD slot. http://qi-hw.com/p/f32xbase/c1935d5 | 19:17 |
qi-bot | [commit] werner: fix wrong bold content in manual page fped.1 http://qi-hw.com/p/fped/dd255ef | 23:22 |
qi-bot | [commit] Xiangfu Liu: Merge branch 'master' into debian http://qi-hw.com/p/fped/8b991b4 | 23:22 |
qi-bot | [commit] Xiangfu Liu: update take svn rev: 5983 http://qi-hw.com/p/fped/aa53ed7 | 23:22 |
qi-bot | [commit] Xiangfu Liu: remove the Build-Depends ttf-liberation http://qi-hw.com/p/fped/900b101 | 23:22 |
qi-bot | [commit] werner: fped/Makefile: added LDFLAGS (currently empty) http://qi-hw.com/p/fped/feae08f | 23:22 |
qi-bot | [commit] Xiangfu Liu: Merge branch 'master' into debian http://qi-hw.com/p/fped/5fe30c6 | 23:22 |
qi-bot | [commit] Xiangfu Liu: update to svn rev 5986 http://qi-hw.com/p/fped/c66a648 | 23:22 |
qi-bot | [commit] werner: fix wrong bold content in manual page fped.1 http://qi-hw.com/p/fped/dd255ef | 23:22 |
qi-bot | [commit] werner: fped/Makefile: added LDFLAGS (currently empty) http://qi-hw.com/p/fped/feae08f | 23:22 |
qi-bot | [commit] Wolfgang Spraul: Starting cleanup, first remove plotted schematics. http://qi-hw.com/p/mmone-jtag-serial-cable/edb1b9e | 01:33 |
---|---|---|
qi-bot | [commit] kyak: Disable RNDIS for now, it's broken (give Windows users a chance to use CDC/ECM http://qi-hw.com/p/openwrt-xburst/3683618 | 02:52 |
qi-bot | [commit] kyak: ubi-utils is replaced by mtd-utils http://qi-hw.com/p/openwrt-xburst/0e77c74 | 03:14 |
qi-bot | [commit] Xiangfu Liu: some improvements to imgv http://qi-hw.com/p/imgv/16ccc7f | 22:14 |
qi-bot | [commit] Xiangfu Liu: [imgv] update to 0.3.0 http://qi-hw.com/p/openwrt-packages/37c649f | 22:17 |
qi-bot | [commit] Xiangfu Liu: [uboot-xburst] small cleanup about __gpio_jtag_to_uart0() http://qi-hw.com/p/openwrt-xburst/d1f331b | 03:08 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: move mmc files to drivers/mmc/ http://qi-hw.com/p/openwrt-xburst/d2f389b | 04:18 |
qi-bot | [commit] Xiangfu Liu: remove useless functions in jz_mmc.c: http://qi-hw.com/p/openwrt-xburst/ee76fb4 | 10:58 |
qi-bot | [commit] kyak: fbida: a few applications for viewing and editing images; ghostscript as http://qi-hw.com/p/openwrt-packages/277888f | 12:41 |
qi-bot | [commit] kyak: a little help text from man fbgs http://qi-hw.com/p/openwrt-packages/ee8e1ef | 13:00 |
qi-bot | [commit] kyak: fbida: don't segfault on "h" http://qi-hw.com/p/openwrt-packages/2a7fda5 | 14:24 |
qi-bot | [commit] Werner Almesberger: Avoid leading zeroes in resistance and capacitance values (except 0R) http://qi-hw.com/p/eda-tools/2744057 | 16:31 |
qi-bot | [commit] Werner Almesberger: boom/dist/dk/dk-catq.pl: allow out-of-stock parts http://qi-hw.com/p/eda-tools/b66b71f | 00:07 |
---|---|---|
qi-bot | [commit] Werner Almesberger: manu/Makefile were highly redundant. Moved their content to a common Makefile. http://qi-hw.com/p/eda-tools/ac7ebdd | 00:07 |
qi-bot | [commit] Werner Almesberger: Oops, murata-grm.catq wasn't committed http://qi-hw.com/p/eda-tools/afda18a | 02:12 |
qi-bot | [commit] Werner Almesberger: Makefile (CHR): generate from list of manufacturer names http://qi-hw.com/p/eda-tools/db2ecbf | 02:12 |
qi-bot | [commit] Werner Almesberger: Added TDK C series of ceramic SMT capacitors. http://qi-hw.com/p/eda-tools/fd67bc9 | 02:12 |
qi-bot | [commit] Erwin Lopez: initial import http://qi-hw.com/p/sie-ceimtun/0a65a50 | 02:51 |
qi-bot | [commit] kyak: fnkeys is now correctly daemonized at start http://qi-hw.com/p/openwrt-packages/1a6e2dc | 06:08 |
qi-bot | [commit] Xiangfu Liu: update config.xbboot comments http://qi-hw.com/p/openwrt-xburst/d52f296 | 07:10 |
qi-bot | [commit] Xiangfu Liu: make gmen2x run in background http://qi-hw.com/p/openwrt-xburst/6cdcc40 | 07:10 |
qi-bot | [commit] Xiangfu Liu: update the gmenu2x.sh, add shell script head http://qi-hw.com/p/gmenu2x/9986a1f | 08:47 |
qi-bot | [commit] Xiangfu Liu: use start-stop-daemon to start gmenu2x, thanks to kyak http://qi-hw.com/p/openwrt-xburst/4c5ae5d | 08:49 |
qi-bot | [commit] Xiangfu Liu: use start-stop-daemon to start gmenu2x, thanks to kyak http://qi-hw.com/p/openwrt-xburst/ad57f36 | 08:55 |
qi-bot | [commit] Andres Calderon: header25x2_smd_2mm footprint added http://qi-hw.com/p/xue/44ffe78 | 09:27 |
qi-bot | [commit] Andres Calderon: 1. GPIO connector changed from 2.54mm to 2.0mm pitch http://qi-hw.com/p/xue/609a4fc | 11:35 |
qi-bot | [commit] Andres Calderon: Routing from the FTDI chip to the AVR Tiny http://qi-hw.com/p/xue/5e9b8d3 | 12:31 |
qi-bot | [commit] Andres Calderon: AVR to FTDI conections has been routed http://qi-hw.com/p/xue/c3daabb | 13:01 |
qi-bot | [commit] Juan64Bits: Routing FTDI http://qi-hw.com/p/xue/afff77e | 17:08 |
qi-bot | [commit] Werner Almesberger: Added sanity check for characteristics and corrected omissions/errors found. http://qi-hw.com/p/eda-tools/bf2e9f2 | 17:29 |
qi-bot | [commit] Werner Almesberger: Added AVX general-purpose ceramic SMT capacitors, "no series" http://qi-hw.com/p/eda-tools/d816e82 | 17:29 |
qi-bot | [commit] Werner Almesberger: dist/dk/Makefile (count): new target to count the number of parts we have http://qi-hw.com/p/eda-tools/1f52cc9 | 17:29 |
qi-bot | [commit] Werner Almesberger: Added Johanson general-purpose ceramic SMT capacitors. http://qi-hw.com/p/eda-tools/f0df994 | 17:29 |
qi-bot | [commit] Werner Almesberger: Added Johanson RF capacitors. http://qi-hw.com/p/eda-tools/94de4f9 | 17:29 |
qi-bot | [commit] Werner Almesberger: test.sub now better catches typos and supports more capacitor parameters. http://qi-hw.com/p/eda-tools/d31ede8 | 17:29 |
qi-bot | [commit] Werner Almesberger: boom/mbq2lst: recognize #END comment (as end of file, like in the BOOM parser) http://qi-hw.com/p/eda-tools/b552026 | 17:29 |
qi-bot | [commit] Werner Almesberger: Added more detailed part counting. http://qi-hw.com/p/eda-tools/36048db | 17:29 |
qi-bot | [commit] Werner Almesberger: Introduce temperature coefficients for resistors. http://qi-hw.com/p/eda-tools/5c6ffda | 17:29 |
qi-bot | [commit] Werner Almesberger: Added Stackpole RNCP series of low TC resistors. http://qi-hw.com/p/eda-tools/03e1fde | 17:29 |
qi-bot | [commit] Werner Almesberger: Added Yageo RT series of precision chip resistors. http://qi-hw.com/p/eda-tools/ba9a79e | 17:29 |
qi-bot | [commit] Werner Almesberger: For consistency, renamed captol.inc to ctol.inc. Rs now use rtol.inc instead of http://qi-hw.com/p/eda-tools/6ce7ea1 | 17:29 |
qi-bot | [commit] Werner Almesberger: Separate the test from the boom/ top-level directory. http://qi-hw.com/p/eda-tools/61bfa83 | 19:49 |
qi-bot | [commit] Werner Almesberger: more http://qi-hw.com/p/eda-tools/281dda5 | 19:49 |
qi-bot | [commit] Werner Almesberger: Generate script boom-config that lists all the database paths, like pkg-config http://qi-hw.com/p/eda-tools/0a86c10 | 19:49 |
qi-bot | [commit] Werner Almesberger: It's now easy to get a list all the files, so we don't need dist/all.* anymore. http://qi-hw.com/p/eda-tools/41ae009 | 19:49 |
qi-bot | [commit] Werner Almesberger: Make boom-config complain about usage errors. http://qi-hw.com/p/eda-tools/9e9eb89 | 19:49 |
qi-bot | [commit] Werner Almesberger: eda-tools now has all the R and C we need here. Removed local database. http://qi-hw.com/p/ben-wpan/265ba07 | 19:49 |
qi-bot | [commit] Werner Almesberger: Use prettyord -t plus a tiny bit of shell to do what SHOW_PRETTY did. http://qi-hw.com/p/ben-wpan/2dec646 | 19:49 |
qi-bot | [commit] Werner Almesberger: Fixed typo in panasonic.gen affecting ERJ-P14 parts. http://qi-hw.com/p/eda-tools/71c15a5 | 07:21 |
---|---|---|
qi-bot | [commit] Werner Almesberger: stackpole.gen produced only garbage. Fixed it. http://qi-hw.com/p/eda-tools/d4d34d7 | 07:21 |
qi-bot | [commit] Werner Almesberger: boom/mbq2lst: utility to generate a KiCad-style BOM from a more human-friendly http://qi-hw.com/p/eda-tools/7190706 | 07:21 |
qi-bot | [commit] Werner Almesberger: Test query to exercise the big resistor database we now have. http://qi-hw.com/p/eda-tools/df88430 | 07:21 |
qi-bot | [commit] Werner Almesberger: Corrected build rule for .equ files in boom/dist/dk/ http://qi-hw.com/p/eda-tools/58bca0e | 11:12 |
qi-bot | [commit] Werner Almesberger: ds-catq.pl: allow selecting multiple values and added a test mode. http://qi-hw.com/p/eda-tools/331094e | 11:12 |
qi-bot | [commit] Werner Almesberger: Added Yageo RC series chip resistors. http://qi-hw.com/p/eda-tools/bf0de45 | 11:12 |
qi-bot | [commit] carlos: fixing xmode initial delay http://qi-hw.com/p/nn-usb-fpga/ee10724 | 12:35 |
qi-bot | [commit] Juan64Bits: Adding FTDI to JTAG/PROG schematic page. http://qi-hw.com/p/xue/d499f7d | 13:56 |
qi-bot | [commit] carlos: Removing MM lm32 board http://qi-hw.com/p/nn-usb-fpga/4900c79 | 21:03 |
qi-bot | [commit] Werner Almesberger: Added a warning that things under boom/ don't make much sense yet. http://qi-hw.com/p/eda-tools/f0519fc | 23:38 |
qi-bot | [commit] Werner Almesberger: Improve scalability by splitting the distributor cache. Additional cleanup and http://qi-hw.com/p/eda-tools/57fc0bd | 23:38 |
qi-bot | [commit] Werner Almesberger: Moved resistor tolerance decoding to lib/tol.inc http://qi-hw.com/p/eda-tools/20517e1 | 23:38 |
qi-bot | [commit] Werner Almesberger: boom/dist/dk/dk-catq.pl: category regexp was mis-designed and it had a typo. http://qi-hw.com/p/eda-tools/310e886 | 23:38 |
qi-bot | [commit] Werner Almesberger: Added Yageo CC series of ceramic SMT capacitors. http://qi-hw.com/p/eda-tools/0b24c43 | 23:38 |
qi-bot | [commit] Werner Almesberger: Removed knowledge about distributors from manufacturers and (partially) from http://qi-hw.com/p/eda-tools/83d4e70 | 23:38 |
qi-bot | [commit] Werner Almesberger: dk-catq.pl: allow selection of top category as well http://qi-hw.com/p/eda-tools/046ae85 | 23:38 |
qi-bot | [commit] Werner Almesberger: Yageo CC...R50 weren't recognized. http://qi-hw.com/p/eda-tools/9ddc70f | 23:38 |
qi-bot | [commit] Werner Almesberger: Added Murata GRM series of ceramic SMT capacitors. http://qi-hw.com/p/eda-tools/dff11db | 23:38 |
qi-bot | [commit] Carlos Camargo: Fixing cai9n loader for lm32 errors http://qi-hw.com/p/nn-usb-fpga/43de1a5 | 14:01 |
---|---|---|
qi-bot | [commit] Werner Almesberger: Catalog listing and enhanced versions of various BOOM items from ben-wpan/bom. http://qi-hw.com/p/eda-tools/c1574ce | 23:05 |
qi-bot | [commit] Bas Wijnen: use proper place for 2 GB ecc http://qi-hw.com/p/iris/7e8cc1d | 10:12 |
---|
qi-bot | [commit] Werner Almesberger: schhist/gitsch2ps: removed redundant quotes in assignments. http://qi-hw.com/p/eda-tools/a1d1182 | 03:50 |
---|---|---|
qi-bot | [commit] carlos: lm32 loader http://qi-hw.com/p/nn-usb-fpga/7b666c0 | 09:50 |
qi-bot | [commit] Ayla: The selector filters will now match also the files with an extension in uppercase. http://qi-hw.com/p/gmenu2x/5cd92b7 | 16:18 |
qi-bot | [commit] Ayla: When adding a new link, the default brightness is now -1. http://qi-hw.com/p/gmenu2x/69c702f | 16:18 |
qi-bot | [commit] Neil Stockbridge: There is now a tool for creating un-fuzzy fonts http://qi-hw.com/p/setfont2/ecd17dc | 17:35 |
qi-bot | [commit] Neil Stockbridge: There are now two example Pre fonts http://qi-hw.com/p/setfont2/267d166 | 17:41 |
qi-bot | [commit] Werner Almesberger: Removed relative date in commit entries. http://qi-hw.com/p/eda-tools/e7f8445 | 04:52 |
---|---|---|
qi-bot | [commit] carlos: Adding bootloader for lm32 http://qi-hw.com/p/nn-usb-fpga/9b75552 | 10:06 |
qi-bot | [commit] César Pedraza: .. http://qi-hw.com/p/nn-usb-fpga/c48feff | 11:11 |
qi-bot | [commit] César Pedraza: fixed logic for Evalfit peripheral http://qi-hw.com/p/nn-usb-fpga/5fbd9db | 11:22 |
qi-bot | [commit] César Pedraza: logic fixed http://qi-hw.com/p/nn-usb-fpga/ece832a | 11:24 |
qi-bot | [commit] werner: Updated regression tests for output change in r5974 and improved handling of http://qi-hw.com/p/fped/0251833 | 12:05 |
qi-bot | [commit] werner: Makefile (spotless): added target to remove "fped" (suggested by Xiangfu Liu) http://qi-hw.com/p/fped/a119e25 | 12:05 |
qi-bot | [commit] werner: make the SVN_VERSION, SVN_STATUS run only once. http://qi-hw.com/p/fped/478bf03 | 12:05 |
qi-bot | [commit] werner: add the manual page manual/fped.1 http://qi-hw.com/p/fped/4d175e5 | 12:05 |
qi-bot | [commit] werner: add DESTDIR to Makefile. http://qi-hw.com/p/fped/585ea55 | 12:05 |
qi-bot | [commit] werner: Updated regression tests for output change in r5974 and improved handling of http://qi-hw.com/p/fped/0251833 | 12:05 |
qi-bot | [commit] werner: Makefile (spotless): added target to remove "fped" (suggested by Xiangfu Liu) http://qi-hw.com/p/fped/a119e25 | 12:05 |
qi-bot | [commit] werner: make the SVN_VERSION, SVN_STATUS run only once. http://qi-hw.com/p/fped/478bf03 | 12:05 |
qi-bot | [commit] werner: add the manual page manual/fped.1 http://qi-hw.com/p/fped/4d175e5 | 12:05 |
qi-bot | [commit] werner: add DESTDIR to Makefile. http://qi-hw.com/p/fped/585ea55 | 12:05 |
qi-bot | [commit] Xiangfu Liu: add debian package stuff http://qi-hw.com/p/fped/2e53275 | 12:05 |
qi-bot | [commit] Xiangfu Liu: clean up the Build-Depends. http://qi-hw.com/p/fped/2904478 | 12:05 |
qi-bot | [commit] Xiangfu Liu: use the new version rules. http://qi-hw.com/p/fped/ba53ced | 12:05 |
qi-bot | [commit] Xiangfu Liu: add debian/fped.manpages for install manpage http://qi-hw.com/p/fped/937213b | 12:05 |
qi-bot | [commit] afc: fix http://qi-hw.com/p/xue/4abc118 | 12:15 |
qi-bot | [commit] Xiangfu Liu: add debian/fped.manpages for install manpage http://qi-hw.com/p/fped/bf4e0b9 | 12:17 |
qi-bot | [commit] Xiangfu Liu: update to svn rev 5982, enable dh_auto_test http://qi-hw.com/p/fped/23dc370 | 12:17 |
qi-bot | [commit] Xiangfu Liu: use usual name for orig tarball top-level directory http://qi-hw.com/p/fped/131fa60 | 12:33 |
qi-bot | [commit] Bas Wijnen: allow u-boot usbboot to be used as well http://qi-hw.com/p/iris/90186ce | 12:55 |
qi-bot | [commit] Bas Wijnen: allow using 2GB nand and ignore 'valid'-bits http://qi-hw.com/p/iris/8d5e290 | 13:30 |
qi-bot | [commit] Juan64Bits: Routing some FPGA free GPIOs http://qi-hw.com/p/xue/0411d60 | 23:07 |
qi-bot | [commit] Niels: let the user select a subdirectory to mass download tiles into. Use this for tiles you want to delete after usage. Just delete the subdirectory in $HOME/Maps. http://qi-hw.com/p/nanomap/c4d718f | 08:52 |
---|---|---|
qi-bot | [commit] Niels: show download progress only during the download http://qi-hw.com/p/nanomap/4c4a960 | 08:52 |
qi-bot | [commit] Niels: fix layout of download widget http://qi-hw.com/p/nanomap/1d81db0 | 08:52 |
qi-bot | [commit] kyak: gcc: strip debug, install cleanly, both static and share linking works http://qi-hw.com/p/openwrt-packages/3e4e587 | 12:20 |
qi-bot | [commit] Bas Wijnen: Add unbricking method http://qi-hw.com/p/iris/9aff93c | 04:46 |
---|---|---|
qi-bot | [commit] Andres Calderon: GPIO connector initial placement http://qi-hw.com/p/xue/dfaed9a | 10:29 |
qi-bot | [commit] Andres Calderon: 40 pins connector added http://qi-hw.com/p/xue/eaf3abb | 10:29 |
qi-bot | [commit] kyak: gcc: don't strip shared libraries (now shared build works, too) http://qi-hw.com/p/openwrt-packages/b7e9047 | 11:37 |
qi-bot | [commit] Bas Wijnen: remove obsolete dependencies http://qi-hw.com/p/iris/b756006 | 14:26 |
qi-bot | [commit] Bas Wijnen: small fixes http://qi-hw.com/p/iris/6022307 | 16:49 |
qi-bot | [commit] Andres Calderon: - root page has been resized http://qi-hw.com/p/xue/e40b97f | 19:27 |
qi-bot | [commit] Alan Post: silence error when package has no patches directory. http://qi-hw.com/p/openwrt-xburst/d340b5b | 00:18 |
---|---|---|
qi-bot | [commit] Alan Post: check in package lojban-wordlists http://qi-hw.com/p/openwrt-packages/7253552 | 00:18 |
qi-bot | [commit] Alan Post: jbofihe: The Lojban Parser http://qi-hw.com/p/openwrt-packages/8834e02 | 00:18 |
qi-bot | [commit] Alan Post: Add package description for makfa. http://qi-hw.com/p/openwrt-packages/8c2ff78 | 00:18 |
qi-bot | [commit] Alan Post: Move makfa from education to Languages/Lojban. http://qi-hw.com/p/openwrt-packages/9ef3793 | 00:18 |
qi-bot | [commit] Alan Post: Record myself as the maintainer of makfa. http://qi-hw.com/p/openwrt-packages/a3c7562 | 00:18 |
qi-bot | [commit] Alan Post: makfa package python cleanup http://qi-hw.com/p/openwrt-packages/0847b73 | 00:18 |
qi-bot | [commit] Alan Post: Fix license statement to conform to gplv3 and properly credit author. http://qi-hw.com/p/openwrt-packages/db7d691 | 01:10 |
qi-bot | [commit] kyak: gcc: initial port http://qi-hw.com/p/openwrt-packages/285555c | 03:39 |
qi-bot | [commit] kyak: Merge branch 'master' of projects.qi-hardware.com:openwrt-packages http://qi-hw.com/p/openwrt-packages/568ac7b | 03:39 |
qi-bot | [commit] Alan Post: separate conditions rather than ignoring error, thx @werner http://qi-hw.com/p/openwrt-xburst/b48d96a | 12:42 |
qi-bot | [commit] Alan Post: Add my e-mail address to the copyright header. http://qi-hw.com/p/openwrt-packages/4877e69 | 12:49 |
qi-bot | [commit] Juan64Bits: Connecting some FPGA's free GPIO http://qi-hw.com/p/xue/874a01d | 17:11 |
qi-bot | [commit] carlos: Removing battery circuit http://qi-hw.com/p/nn-usb-fpga/9da569a | 18:52 |
qi-bot | [commit] Werner Almesberger: Increased clearance from 9 mil to 9.7 mil. http://qi-hw.com/p/f32xbase/ad0015d | 02:56 |
---|---|---|
qi-bot | [commit] Werner Almesberger: Make the board a bit bigger for more relaxed spacing of traces and components. http://qi-hw.com/p/f32xbase/c7a53e8 | 02:56 |
qi-bot | [commit] Werner Almesberger: R1/R2 were very close to U1 - move them away. Some small cleanup. http://qi-hw.com/p/f32xbase/807616f | 02:56 |
qi-bot | [commit] Werner Almesberger: hw/cam/: toolpath generation for cutting the PCB. http://qi-hw.com/p/f32xbase/c9f4c9b | 02:56 |
qi-bot | [commit] Werner Almesberger: Customize the FT232 EEPROM with the Qi Hardware ID and other parameters. http://qi-hw.com/p/f32xbase/9777d88 | 02:56 |
qi-bot | [commit] Werner Almesberger: Added BOOKSELF and dsv setup procedure. http://qi-hw.com/p/f32xbase/3fd1720 | 02:56 |
qi-bot | [commit] Werner Almesberger: fw/c2usb.conf: USB product ID assignment is now official http://qi-hw.com/p/f32xbase/77d6848 | 08:29 |
qi-bot | [commit] Juan64Bits: Routing image sensor. http://qi-hw.com/p/xue/ad23f9e | 12:43 |
qi-bot | [commit] Juan64Bits: Cleaning. http://qi-hw.com/p/xue/cc01f3c | 12:47 |
qi-bot | [commit] Xiangfu Liu: add the manual page manual/fped.1 http://qi-hw.com/p/fped/f8ed574 | 21:19 |
qi-bot | [commit] Xiangfu Liu: add debian/fped.manpages for install manpage http://qi-hw.com/p/fped/31b5a9d | 21:19 |
qi-bot | [commit] Xiangfu Liu: add DESTDIR to Makefile. http://qi-hw.com/p/fped/d50bb0b | 21:19 |
qi-bot | [commit] Bas Wijnen: mass storage sort of working, but not nice http://qi-hw.com/p/iris/5f9fd7c | 03:52 |
---|---|---|
qi-bot | [commit] carlos: Fixing some errors on SAKC Examples http://qi-hw.com/p/nn-usb-fpga/568f218 | 12:54 |
qi-bot | [commit] Werner Almesberger: Option -D to keep temporary work trees for analysis/debugging. http://qi-hw.com/p/eda-tools/f68e5a5 | 02:39 |
---|---|---|
qi-bot | [commit] Werner Almesberger: Allow setting of _schhist2web, to allow for parallel runs. http://qi-hw.com/p/eda-tools/479fff1 | 03:02 |
qi-bot | [commit] Werner Almesberger: Make schhist try harder to do seamless in-place updates. http://qi-hw.com/p/eda-tools/9816847 | 07:07 |
qi-bot | [commit] Xiangfu Liu: clean up the Build-Depends. http://qi-hw.com/p/fped/a6136d0 | 12:58 |
qi-bot | [commit] Xiangfu Liu: use the new version rules. http://qi-hw.com/p/fped/22104c3 | 12:58 |
qi-bot | [commit] Xiangfu Liu: add the manual page manual/fped.1 http://qi-hw.com/p/fped/9525b6b | 12:58 |
qi-bot | [commit] Xiangfu Liu: add debian/fped.manpages for install manpage http://qi-hw.com/p/fped/21e7a43 | 12:58 |
qi-bot | [commit] Xiangfu Liu: add DESTDIR to Makefile. http://qi-hw.com/p/fped/af26e0b | 12:58 |
qi-bot | [commit] Xiangfu Liu: make the SVN_VERSION, SVN_STATUS run only once. http://qi-hw.com/p/fped/4e4b3a8 | 04:17 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: clean up the Build-Depends. http://qi-hw.com/p/fped/ba96a93 | 04:17 |
qi-bot | [commit] Xiangfu Liu: use the new version rules. http://qi-hw.com/p/fped/a3b3ed4 | 04:17 |
qi-bot | [commit] Xiangfu Liu: clean up the Build-Depends. http://qi-hw.com/p/fped/eebb79f | 04:38 |
qi-bot | [commit] Xiangfu Liu: use the new version rules. http://qi-hw.com/p/fped/2d8b6c2 | 04:38 |
qi-bot | [commit] carlos: Change ADC from Texas to Microchip MCP3008. http://qi-hw.com/p/nn-usb-fpga/70a1465 | 07:55 |
qi-bot | [commit] carlos: Adding SPI serial flash component x25x64mb.lib http://qi-hw.com/p/nn-usb-fpga/8808163 | 07:58 |
qi-bot | [commit] carlos: fixing DRC errors http://qi-hw.com/p/nn-usb-fpga/46e28e9 | 10:56 |
qi-bot | [commit] Juan64Bits: Placing image sensor and sources http://qi-hw.com/p/xue/1deb259 | 11:53 |
qi-bot | [commit] Juan64Bits: Cleaning absolute paths. http://qi-hw.com/p/xue/080b43d | 14:32 |
qi-bot | [commit] Werner Almesberger: Added mmone-jtag-serial-cable. http://qi-hw.com/p/eda-tools/8be9fe1 | 02:08 |
---|---|---|
qi-bot | [commit] Werner Almesberger: gitsch2ps now by default removes cache.lib (option -c keeps it) http://qi-hw.com/p/eda-tools/7b1d3fd | 02:08 |
qi-bot | [commit] Werner Almesberger: Environment variable SCHHIST_ADDLIBS to force libraries to be present. http://qi-hw.com/p/eda-tools/4d28daf | 02:08 |
qi-bot | [commit] Xiangfu Liu: add 'rm -f fped' to make clean http://qi-hw.com/p/fped/9e2ee45 | 11:19 |
qi-bot | [commit] Xiangfu Liu: add debian package stuff http://qi-hw.com/p/fped/731491f | 11:19 |
qi-bot | [commit] Xiangfu Liu: add ITP bug number to 'debian/changelog' http://qi-hw.com/p/fped/b0062ee | 11:34 |
qi-bot | [commit] carlos: Adding serial flash to FPGA http://qi-hw.com/p/nn-usb-fpga/d9b9e52 | 12:45 |
qi-bot | [commit] Werner Almesberger: Firmware-free C2 programmer, with USB interface. http://qi-hw.com/p/f32xbase/88f3dcc | 02:10 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ben-pcb-domes is done at 1 mm and 500 um. http://qi-hw.com/p/ben-scans/77fdf5a | 02:39 |
qi-bot | [commit] Alan Post: Remove BROKEN tag: wordgrinder is working with latest image. http://qi-hw.com/p/openwrt-packages/59d9e88 | 18:10 |
qi-bot | [commit] Juan José Díaz Vecchio: Libraries location fixed, added 2 screw holes http://qi-hw.com/p/sie-ceimtun/1b9f206 | 19:35 |
qi-bot | [commit] Werner Almesberger: schhist/Makefile: added sie-v2 http://qi-hw.com/p/eda-tools/2cfc6ef | 20:59 |
qi-bot | [commit] Werner Almesberger: Moved dsv over from ben-wpan (now in eda-tools/dsv/dsv) http://qi-hw.com/p/eda-tools/c247df9 | 20:59 |
qi-bot | [commit] Werner Almesberger: Moved dsv to eda-tools. http://qi-hw.com/p/ben-wpan/b1f1b48 | 21:00 |
qi-bot | [commit] Werner Almesberger: Merge branch 'master' of projects.qi-hardware.com:ben-wpan http://qi-hw.com/p/ben-wpan/bcbd6d8 | 21:00 |
qi-bot | [commit] Alan Post: Replace OpenWrt banner with a custom NanoNote banner. http://qi-hw.com/p/openwrt-xburst/af01e04 | 21:39 |
qi-bot | [commit] Werner Almesberger: Corrected the renumbering warning in sanitize-profile. http://qi-hw.com/p/eda-tools/4c81717 | 22:43 |
qi-bot | [commit] Werner Almesberger: Added AVT2 to the Makefile and the demo index. http://qi-hw.com/p/eda-tools/781c92d | 22:43 |
qi-bot | [commit] Werner Almesberger: Make schhist more forgiving if profile or top-level sheet is missing. http://qi-hw.com/p/eda-tools/02bb696 | 23:32 |
qi-bot | [commit] Werner Almesberger: ben-pcb-comp2: 1 mm and 100 um scans are done. Reusing old ben-pcb-comp-500um. http://qi-hw.com/p/ben-scans/d0d1c5c | 05:40 |
---|---|---|
qi-bot | [commit] carlos: Connecting FPGA GPIOs to U6 (max3223) allowing RS232 serial communication http://qi-hw.com/p/nn-usb-fpga/3727395 | 12:11 |
qi-bot | [commit] carlos: Merging J6 and J7 in J67 4x2 connector. http://qi-hw.com/p/nn-usb-fpga/b99e542 | 13:08 |
qi-bot | [commit] kristianpaul: Added filled case version http://qi-hw.com/p/ben-wpan/76322b9 | 23:13 |
qi-bot | [commit] Werner Almesberger: Fixed use of argument of -c. http://qi-hw.com/p/eda-tools/b94f1b2 | 05:00 |
---|---|---|
qi-bot | [commit] Werner Almesberger: New script sanitize-schem to remove subsheets for which no file can be found. http://qi-hw.com/p/eda-tools/75a4ea8 | 07:26 |
qi-bot | [commit] Werner Almesberger: sanitize-profile accidently ignored LibDir, causing many incorrect "corrections" http://qi-hw.com/p/eda-tools/d4405e4 | 07:26 |
qi-bot | [commit] Niels: add menu to show/hide layers http://qi-hw.com/p/nanomap/8daff26 | 09:03 |
qi-bot | [commit] Carlos Camargo: Adding evolvable hardware example http://qi-hw.com/p/nn-usb-fpga/1f2712e | 10:06 |
qi-bot | [commit] Werner Almesberger: solidify/README: some documentation http://qi-hw.com/p/cae-tools/c8b0a51 | 13:00 |
---|---|---|
qi-bot | [commit] Werner Almesberger: Added the license (GPLv2+) http://qi-hw.com/p/cae-tools/7ea7db8 | 13:00 |
qi-bot | [commit] Werner Almesberger: Added "new" along with its paraphernalia. http://qi-hw.com/p/ben-scans/26beb8a | 05:48 |
---|---|---|
qi-bot | [commit] Werner Almesberger: grr http://qi-hw.com/p/ben-scans/dbc7360 | 05:48 |
qi-bot | [commit] Werner Almesberger: Solidified the bottom shell. http://qi-hw.com/p/ben-scans/03e6a54 | 05:48 |
qi-bot | [commit] Werner Almesberger: Corrected aspect ratio, added lateral views, and improved Makefile. http://qi-hw.com/p/ben-scans/43b3694 | 05:48 |
qi-bot | [commit] Werner Almesberger: Added expose events for auxiliary projections. http://qi-hw.com/p/cae-tools/abb945e | 22:17 |
qi-bot | [commit] Werner Almesberger: Move draw_circle from util.c to gui_util.c http://qi-hw.com/p/cae-tools/fd7b722 | 22:17 |
qi-bot | [commit] Werner Almesberger: Changed the style of projection displays from lines to filled surfaces, to http://qi-hw.com/p/cae-tools/46704e6 | 22:17 |
qi-bot | [commit] Werner Almesberger: Scale z axis in projection displays to obtain 1:1 aspect ratio. http://qi-hw.com/p/cae-tools/761002e | 22:17 |
qi-bot | [commit] Werner Almesberger: Added a thin black border above and below the projections. http://qi-hw.com/p/cae-tools/f2963b9 | 22:17 |
qi-bot | [commit] Werner Almesberger: Increased some borders/gaps for better visual appearance. http://qi-hw.com/p/cae-tools/5fd9b33 | 22:17 |
qi-bot | [commit] Werner Almesberger: The bottom face can now be shifted and rotated as well. http://qi-hw.com/p/cae-tools/733332d | 22:17 |
qi-bot | [commit] Werner Almesberger: solidify/template.pov: corrected aspect ratio (1.42 instead of 1.33) http://qi-hw.com/p/cae-tools/5595c74 | 22:17 |
qi-bot | [commit] Xiangfu Liu: use the original bz2 file as the orig.tar.bz2, do not repackage it, http://qi-hw.com/p/xburst-tools/afa0c1b | 22:54 |
qi-bot | [commit] kristianpaul: New case design blue collored ~4 mm high http://qi-hw.com/p/ben-wpan/be87d64 | 23:05 |
qi-bot | [commit] Werner Almesberger: Cleaned up POV-Ray file handling. New use: solidify -p project http://qi-hw.com/p/cae-tools/12f5aa2 | 01:52 |
---|---|---|
qi-bot | [commit] Werner Almesberger: Cleaned up z0 plane input/output. Note: need to change fx in all .sfy files ! http://qi-hw.com/p/cae-tools/1638123 | 01:52 |
qi-bot | [commit] Werner Almesberger: Correct z0 for z vs. xy scale differences. Now things work as planned ! http://qi-hw.com/p/cae-tools/6acca4e | 01:52 |
qi-bot | [commit] Werner Almesberger: Re-aligned all projects after fixing the inclination in solidify. http://qi-hw.com/p/ben-scans/c00799f | 01:52 |
qi-bot | [commit] Werner Almesberger: Makefile and helper scripts for running solidify and POV-Ray. http://qi-hw.com/p/ben-scans/6e287cd | 01:52 |
qi-bot | [commit] Werner Almesberger: Show an exploded view of all parts scanned so far in one image. http://qi-hw.com/p/ben-scans/3b6325d | 02:59 |
qi-bot | [commit] kyak: w3m actually depends on ncurses http://qi-hw.com/p/openwrt-packages/ad4b048 | 09:13 |
qi-bot | [commit] Werner Almesberger: ben-bottom-outside2-100um is done. http://qi-hw.com/p/ben-scans/252da04 | 11:13 |
qi-bot | [commit] Xiangfu Liu: make the changelog maintainer name same as control file. http://qi-hw.com/p/xburst-tools/29778e8 | 22:24 |
qi-bot | [commit] Xiangfu Liu: remove empty folder, we copy uboot to bin/xburst http://qi-hw.com/p/openwrt-xburst/a08dad4 | 03:53 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: remove empty folder, we copy uboot to bin/xburst http://qi-hw.com/p/openwrt-xburst/7f4d509 | 03:55 |
qi-bot | [commit] Xiangfu Liu: mtd-utils goto upstream, don't need ubi-utils anymore http://qi-hw.com/p/openwrt-packages/398002e | 04:11 |
qi-bot | [commit] Werner Almesberger: Adjust button size when switching between views. http://qi-hw.com/p/cae-tools/2997c6b | 08:40 |
qi-bot | [commit] kyak: MPlayer: added mp3 support via libmad; see README http://qi-hw.com/p/openwrt-packages/a4873ed | 09:54 |
qi-bot | [commit] kyak: Merge branch 'master' of projects.qi-hardware.com:openwrt-packages http://qi-hw.com/p/openwrt-packages/bf179f8 | 09:54 |
qi-bot | [commit] kyak: MPlayer is too good not to depend on @BUILD_PATENTED http://qi-hw.com/p/openwrt-packages/cebe754 | 10:00 |
qi-bot | [commit] Werner Almesberger: Added auxiliary projections to help mis-levelling with more confidence. http://qi-hw.com/p/cae-tools/a3f17c5 | 12:18 |
qi-bot | [commit] Werner Almesberger: solidify/batcvr.sfy: found a better inclination for the top face http://qi-hw.com/p/cae-tools/f635ac9 | 12:18 |
qi-bot | [commit] Werner Almesberger: Rendering improvements. http://downloads.qi-hardware.com/people/werner/tmp/main.png http://qi-hw.com/p/cae-tools/32a4d4a | 12:18 |
qi-bot | [commit] kyak: MPlayer: enable OSD support http://qi-hw.com/p/openwrt-packages/2d9742e | 15:05 |
qi-bot | [commit] kyak: MPlayer: enable volume control via Ben volume keys http://qi-hw.com/p/openwrt-packages/7c7d365 | 15:23 |
qi-bot | [commit] Werner Almesberger: Experimental alignments for solidify. http://qi-hw.com/p/ben-scans/4226d0b | 21:09 |
qi-bot | [commit] Werner Almesberger: Correct direction of x inclination of z0. http://qi-hw.com/p/cae-tools/5170410 | 21:09 |
qi-bot | [commit] Werner Almesberger: Make new/run/pov/disp are now configurable when invoking make. http://qi-hw.com/p/cae-tools/ffb0d99 | 21:09 |
qi-bot | [commit] Werner Almesberger: Moved batcvr.sfy over to ben-scans. Removing it here. http://qi-hw.com/p/cae-tools/1c183e0 | 21:09 |
qi-bot | [commit] Xiangfu Liu: update the distribution to [unstable] http://qi-hw.com/p/xburst-tools/f1bc77a | 23:13 |
qi-bot | [commit] Juan José Díaz Vecchio: Realease Candidate 2, completely new PCB http://qi-hw.com/p/sie-ceimtun/ae70b4b | 00:35 |
---|---|---|
qi-bot | [commit] Werner Almesberger: Sanitize POV-Ray output (in progress) http://qi-hw.com/p/ben-scans/286a6bd | 03:17 |
qi-bot | [commit] Werner Almesberger: Fix our trigonometry: the z0 inclination is expressed as a tangent, not a sine. http://qi-hw.com/p/ben-scans/98b6050 | 03:17 |
qi-bot | [commit] Werner Almesberger: All there is in solid.c is about POV-Ray, so rename it to povray.c http://qi-hw.com/p/ben-scans/49ea351 | 03:17 |
qi-bot | [commit] Werner Almesberger: ben-lcdframe-front-100um is done. http://qi-hw.com/p/ben-scans/f37441a | 03:17 |
qi-bot | [commit] Werner Almesberger: In POV-Ray output, move faces to more correct Z locations. http://qi-hw.com/p/ben-scans/f0a8bcd | 03:47 |
qi-bot | [commit] Werner Almesberger: Moved solidify to a new and more suitable project: cae-tools. http://qi-hw.com/p/ben-scans/bec6988 | 03:54 |
qi-bot | [commit] Xiangfu Liu: add Qi Hardware Inc, Ingenic Semiconductor, to copyright http://qi-hw.com/p/xburst-tools/ba64178 | 04:03 |
qi-bot | [commit] Xiangfu Liu: change the version number to 201007. http://qi-hw.com/p/xburst-tools/5f83781 | 04:03 |
qi-bot | [commit] Xiangfu Liu: for misunderstand the debian rules. I create a [debian] branch for debian package http://qi-hw.com/p/xburst-tools/7b710f3 | 04:21 |
qi-bot | [commit] Werner Almesberger: Added project sie-ceimtun. Plus some cleanup. http://qi-hw.com/p/eda-tools/31fe9c6 | 04:30 |
qi-bot | [commit] Xiangfu Liu: update all debian package base on verison numver 201007 http://qi-hw.com/p/xburst-tools/fe61707 | 04:53 |
qi-bot | [commit] Xiangfu Liu: update all debian package base on verison numver 201007 http://qi-hw.com/p/xburst-tools/5e6ede1 | 05:05 |
qi-bot | [commit] Werner Almesberger: ben-bottom-outside2 is done at 1 mm and 500 um resolution. http://qi-hw.com/p/ben-scans/b45e536 | 09:43 |
qi-bot | [commit] Xiangfu Liu: this fix the `uscan --report-status` error http://qi-hw.com/p/xburst-tools/70466ee | 10:43 |
qi-bot | [commit] kristianpaul: Added first alpha design files for atusd case http://qi-hw.com/p/ben-wpan/6af7641 | 14:06 |
qi-bot | [commit] Werner Almesberger: Small improvements to spectrum walk script. http://qi-hw.com/p/ben-wpan/fe7d55d | 14:17 |
qi-bot | [commit] kyak: w3m now builds http://qi-hw.com/p/openwrt-packages/582924b | 14:18 |
qi-bot | [commit] kristianpaul: Added 6mm tall case http://qi-hw.com/p/ben-wpan/5810f2b | 14:30 |
qi-bot | [commit] kristianpaul: Merge branch 'master' of projects.qi-hardware.com:ben-wpan http://qi-hw.com/p/ben-wpan/9b99628 | 14:30 |
qi-bot | [commit] Juan64Bits: Fixing label problems, connecting image sensor. http://qi-hw.com/p/xue/71f9ab7 | 14:35 |
qi-bot | [commit] Juan64Bits: Cleaning http://qi-hw.com/p/xue/66053d7 | 14:37 |
qi-bot | [commit] kristianpaul: Updated instruccions about how to get the gerber in Heekscad also niw Case is now full green http://qi-hw.com/p/ben-wpan/058c417 | 14:51 |
qi-bot | [commit] kyak: MPlayer initial port. All available video outputs: sdl, directfb, fbdev http://qi-hw.com/p/openwrt-packages/32de098 | 17:49 |
qi-bot | [commit] Juan José Díaz Vecchio: Ceimtun logo added, gerber parameters fixed http://qi-hw.com/p/sie-ceimtun/508b491 | 19:27 |
qi-bot | [commit] Juan64Bits: Connecting image sensor. http://qi-hw.com/p/xue/04ce5f7 | 20:10 |
qi-bot | [commit] Xiangfu Liu: add new packages from qipackage http://qi-hw.com/p/openwrt-xburst/f0e56a3 | 01:33 |
---|---|---|
qi-bot | [commit] Werner Almesberger: Use two faces and show how they overlap (in progress) http://qi-hw.com/p/ben-scans/525e155 | 05:39 |
qi-bot | [commit] Werner Almesberger: The top face can now be shifted. http://qi-hw.com/p/ben-scans/d49f349 | 05:39 |
qi-bot | [commit] Werner Almesberger: When leveling, the center circle is now shown when the pointer approaches it. http://qi-hw.com/p/ben-scans/edb12b6 | 05:39 |
qi-bot | [commit] Werner Almesberger: Overlapping now has an OSD, too. http://qi-hw.com/p/ben-scans/85855ec | 05:39 |
qi-bot | [commit] Werner Almesberger: Various coordinate transform corrections in overlap.c http://qi-hw.com/p/ben-scans/f3e7c1e | 05:39 |
qi-bot | [commit] Werner Almesberger: Infrastructure for generating POV-Ray output (not useful yet) http://qi-hw.com/p/ben-scans/37e840f | 05:39 |
qi-bot | [commit] Xiangfu Liu: change the INITRAMFS to LZMA compression http://qi-hw.com/p/openwrt-xburst/49182fa | 09:07 |
qi-bot | [commit] Carlos Camargo: Adding sram_gpio_QT example http://qi-hw.com/p/nn-usb-fpga/83f727f | 11:29 |
qi-bot | [commit] Carlos Camargo: Adding qmake.conf sample file http://qi-hw.com/p/nn-usb-fpga/5459532 | 11:57 |
qi-bot | [commit] Werner Almesberger: Instead of performing the tranformations stepwise for each point, pre-calculate http://qi-hw.com/p/ben-scans/898970b | 17:29 |
qi-bot | [commit] Werner Almesberger: More corrections to handling of the "user" matrix. Made controls more intuitive. http://qi-hw.com/p/ben-scans/7c24783 | 17:29 |
qi-bot | [commit] Werner Almesberger: solidify/main.pov: don't use weird "x is up" perspective http://qi-hw.com/p/ben-scans/0186959 | 17:29 |
qi-bot | [commit] Werner Almesberger: Increase dynamic range of rotation and follow "far from center = faster" http://qi-hw.com/p/ben-scans/2764155 | 17:29 |
qi-bot | [commit] Werner Almesberger: Some simple optimizations increase drawing speed in overlap by 33%. http://qi-hw.com/p/ben-scans/d4a5575 | 17:29 |
qi-bot | [commit] Werner Almesberger: Bottom face was flipped in overlap. http://qi-hw.com/p/ben-scans/9c614db | 17:29 |
qi-bot | [commit] Werner Almesberger: Like rotations, shifts can now be accelerated by changing the mouse position. http://qi-hw.com/p/ben-scans/a7105ad | 17:29 |
qi-bot | [commit] kyak: mupdf: added libjpeg dependency as noted by Xiangu http://qi-hw.com/p/openwrt-packages/0e186f0 | 17:56 |
qi-bot | [commit] kyak: stupid workaround to make links compile http://qi-hw.com/p/openwrt-packages/7e5961a | 17:59 |
qi-bot | [commit] Werner Almesberger: The #endif at end of header file must have a comment saying /* !name */ http://qi-hw.com/p/ben-scans/0c49406 | 20:36 |
qi-bot | [commit] Werner Almesberger: Step sizes are now auto-determined, allowing use of files of any resolution. http://qi-hw.com/p/ben-scans/2cc9a9e | 20:36 |
qi-bot | [commit] Werner Almesberger: solidify now stores the context of sessions in project description files. http://qi-hw.com/p/ben-scans/f6ed3bf | 20:36 |
qi-bot | [commit] Werner Almesberger: Use the project name to disambiguate names in POV-Ray output. http://qi-hw.com/p/ben-scans/01d8e41 | 20:36 |
qi-bot | [commit] Werner Almesberger: solidify: fast interactive face to solid converter http://qi-hw.com/p/ben-scans/5f84394 | 06:24 |
---|---|---|
qi-bot | [commit] Werner Almesberger: solidify: set the initial height to the median; uncompress .bz2 on the fly. http://qi-hw.com/p/ben-scans/ecf993e | 06:24 |
qi-bot | [commit] Werner Almesberger: Control inclination of the z0 plane. (Needs more work.) http://qi-hw.com/p/ben-scans/6ac06aa | 06:24 |
qi-bot | [commit] Werner Almesberger: Files can now be specified as HTTP/HTTPS URLs. http://qi-hw.com/p/ben-scans/b5a2d5d | 06:24 |
qi-bot | [commit] Werner Almesberger: ben-lcdframe-back-100um is done. http://qi-hw.com/p/ben-scans/ca1e348 | 07:31 |
qi-bot | [commit] Werner Almesberger: ben-lcdframe-front is done at 1 mm and 500 um X/Y resolution. http://qi-hw.com/p/ben-scans/77a2b2d | 12:51 |
qi-bot | [commit] Werner Almesberger: Added red and green band to blue band as further visual clues. http://qi-hw.com/p/ben-scans/06b1b08 | 22:48 |
qi-bot | [commit] Werner Almesberger: Makefile cleanup and instrumentation (verbosity, dependencies, etc.) http://qi-hw.com/p/ben-scans/8eed5e3 | 22:48 |
qi-bot | [commit] Werner Almesberger: Added copyright headers all over the place. (GPLv2+) http://qi-hw.com/p/ben-scans/598df91 | 22:48 |
qi-bot | [commit] Werner Almesberger: Added interactive 2D transformation (working towards overlapping) http://qi-hw.com/p/ben-scans/cef7cd5 | 22:48 |
qi-bot | [commit] Werner Almesberger: Minor level.c cleanup. http://qi-hw.com/p/ben-scans/fbbbd29 | 22:48 |
qi-bot | [commit] Werner Almesberger: The GUI can now switch among operations. http://qi-hw.com/p/ben-scans/b8bba1d | 22:48 |
qi-bot | [commit] Werner Almesberger: Introduce a solid data type and use it, mainly in overlap() http://qi-hw.com/p/ben-scans/1fa23c5 | 22:48 |
qi-bot | [commit] Werner Almesberger: schhist2web: users can now specify how names are ordered. http://qi-hw.com/p/eda-tools/4780b8b | 09:18 |
---|---|---|
qi-bot | [commit] Werner Almesberger: Demo histories on http://downloads.qi-hardware.com/people/werner/schhist/ http://qi-hw.com/p/eda-tools/bd26493 | 11:07 |
qi-bot | [commit] Werner Almesberger: Added the Johanson 2450FB15L0001 balun as a less expensive alternative to the http://qi-hw.com/p/ben-wpan/e89fc6a | 11:36 |
qi-bot | [commit] Werner Almesberger: ben-baseframe-bottom-100um is done. http://qi-hw.com/p/ben-scans/2cf011d | 03:10 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ben-lcdframe-back-1mm is done. http://qi-hw.com/p/ben-scans/6186a72 | 05:25 |
qi-bot | [commit] kyak: Support two-byte characters in console http://qi-hw.com/p/openwrt-xburst/343b7ed | 07:49 |
qi-bot | [commit] kyak: Added input (typing) and output (viewing) support for cyrillic in http://qi-hw.com/p/openwrt-packages/a8aff41 | 08:16 |
qi-bot | [commit] Werner Almesberger: ben-lcdframe-back-500um is done. http://qi-hw.com/p/ben-scans/d5001c6 | 12:26 |
qi-bot | [commit] Carlos Camargo: Adding file-system http://qi-hw.com/p/nn-usb-fpga/9116375 | 18:08 |
qi-bot | [commit] Werner Almesberger: Put scans on index page in top-down order and added placeholders for still http://qi-hw.com/p/ben-scans/3b14f67 | 00:31 |
---|
qi-bot | [commit] Werner Almesberger: ben-baseframe-bottom-500um is done. http://qi-hw.com/p/ben-scans/1fd036e | 08:57 |
---|
qi-bot | [commit] Werner Almesberger: ben-baseframe-top-100um is done. http://qi-hw.com/p/ben-scans/16fab72 | 09:01 |
---|---|---|
qi-bot | [commit] Ayla: Adding a new file, debug.h, containing useful macros to output information: http://qi-hw.com/p/gmenu2x/7d0c0e9 | 10:24 |
qi-bot | [commit] Ayla: Replaced every message output by calls to the log macros. http://qi-hw.com/p/gmenu2x/7c93647 | 10:24 |
qi-bot | [commit] Ayla: Added some signal handlers, so that gmenu2x will exit correctly if a TERM signal occurs or after a segfault. http://qi-hw.com/p/gmenu2x/c6c3dfe | 10:24 |
qi-bot | [commit] Ayla: Rewrote the whole input system. http://qi-hw.com/p/gmenu2x/563cb34 | 10:24 |
qi-bot | [commit] Ayla: Rewrote the input.conf file so that it will match the previous changes. http://qi-hw.com/p/gmenu2x/ddb5171 | 10:24 |
qi-bot | [commit] Werner Almesberger: ben-baseframe-bottom-1mm is done. http://qi-hw.com/p/ben-scans/b9747fb | 10:51 |
qi-bot | [commit] David Kühling: Major overhaul and cleanup. Support for .ubi image file installations. http://qi-hw.com/p/openwrt-packages/4bfce3b | 14:55 |
qi-bot | [commit] Ayla: When a foo.dge file is loaded, the image file foo.png will be automatically assigned. http://qi-hw.com/p/gmenu2x/0846877 | 15:34 |
qi-bot | [commit] David Kühling: corrected md5sum for new gforth snapshot http://qi-hw.com/p/openwrt-packages/c6a3cb1 | 16:19 |
qi-bot | [commit] Ayla: User can now increase/decrease by 10 the values of clock, brightness etc. http://qi-hw.com/p/gmenu2x/ffdc8de | 18:52 |
qi-bot | [commit] Werner Almesberger: Scan main page is now http://downloads.qi-hardware.com/people/werner/ben-scans/ http://qi-hw.com/p/ben-scans/c7468bd | 17:47 |
---|
qi-bot | [commit] Werner Almesberger: usrp/: a set of utilities for testing board performance with an USRP2 http://qi-hw.com/p/ben-wpan/e445fe1 | 00:08 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: decide use 2007-1 as the debian package's 'upstream source tarball' http://qi-hw.com/p/xburst-tools/0dd4f1e | 12:14 |
qi-bot | [commit] Xiangfu Liu: update VERSION typo http://qi-hw.com/p/xburst-tools/2684c72 | 12:28 |
qi-bot | [commit] Werner Almesberger: Measurement results and a script to view them. http://qi-hw.com/p/ben-wpan/dce0a19 | 13:49 |
qi-bot | [commit] Werner Almesberger: ben-dispshell-inside, 500 um and 100 um are done. http://qi-hw.com/p/ben-scans/d6cbffc | 13:50 |
qi-bot | [commit] Werner Almesberger: ben-baseframe-top: 1 mm and 500 um scans. http://qi-hw.com/p/ben-scans/750e720 | 18:21 |
qi-bot | [commit] Alan Post: update the wordgrinder-0.3.3 patch. http://qi-hw.com/p/openwrt-packages/77694b3 | 11:35 |
---|
qi-bot | [commit] Xiangfu Liu: update upstream_versin. since we use git http://qi-hw.com/p/xburst-tools/3fa922f | 05:43 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: add how to create source tarball to INSTALL http://qi-hw.com/p/xburst-tools/9e192ed | 05:43 |
qi-bot | [commit] Alan Post: pyexpat is only used when updating, move import inside class. http://qi-hw.com/p/openwrt-packages/a816442 | 12:56 |
qi-bot | [commit] Werner Almesberger: Added more resistor choices to BOM processor. http://qi-hw.com/p/ben-wpan/6b5d239 | 19:39 |
qi-bot | [commit] Werner Almesberger: atusd/ERRATA: started errata section for 100912. Nothing major so far. http://qi-hw.com/p/ben-wpan/b390b28 | 19:39 |
qi-bot | [commit] Werner Almesberger: atspi-txrx can now send repeatedly, cleans up on ^C, prints the power level. http://qi-hw.com/p/ben-wpan/c99ba2c | 19:39 |
qi-bot | [commit] Xiangfu Liu: add gforth to config.full_system http://qi-hw.com/p/openwrt-xburst/d4cb34a | 22:07 |
qi-bot | [commit] Xiangfu Liu: Revert "add gforth to config.full_system" http://qi-hw.com/p/openwrt-xburst/c0dd85e | 22:07 |
qi-bot | [commit] Alan Post: move makfa.dump from /var/lib/makfa to /usr/share/makfa http://qi-hw.com/p/openwrt-packages/b3f79e4 | 23:05 |
qi-bot | [commit] Alan Post: makfa: only import ElementTree if we're going to use it. http://qi-hw.com/p/openwrt-packages/4082f67 | 23:05 |
qi-bot | [commit] Alan Post: makfa: only import ElementTree if we're going to use it. http://qi-hw.com/p/openwrt-packages/2f685c0 | 23:05 |
qi-bot | [commit] Xiangfu Liu: update build script file. checkout to tracking_backfire branch http://qi-hw.com/p/openwrt-xburst/6883363 | 01:07 |
---|---|---|
qi-bot | [commit] Wolfgang Spraul: shorter config.xbboot, uses make oldconfig http://qi-hw.com/p/openwrt-xburst/1d326c6 | 01:32 |
qi-bot | [commit] kyak: mupdf, jbig2dec and openjpeg as prerequisites of nupdf. http://qi-hw.com/p/openwrt-packages/bbe0237 | 01:49 |
qi-bot | [commit] kyak: fbterm and jfbterm are now sharing unifont.pcf.gz http://qi-hw.com/p/openwrt-packages/383b527 | 02:39 |
qi-bot | [commit] Wolfgang Spraul: shortened config.full_system by using make oldconfig http://qi-hw.com/p/openwrt-xburst/f697e21 | 05:50 |
qi-bot | [commit] kyak: removed busybox "kbd" features; use "kbd" for this http://qi-hw.com/p/openwrt-xburst/c5ee642 | 09:32 |
qi-bot | [commit] kyak: test.. http://qi-hw.com/p/openwrt-xburst/17f7378 | 09:32 |
qi-bot | [commit] kyak: Revert "test.." http://qi-hw.com/p/openwrt-xburst/9066680 | 09:54 |
qi-bot | [commit] Jiri Brozovsky: First attempt port of PicoC interpreter. Should work. http://qi-hw.com/p/openwrt-packages/8f050f9 | 15:47 |
qi-bot | [commit] David Kühling: use new upstream snapshot that fixes various problems reported on http://qi-hw.com/p/openwrt-packages/bb5e738 | 18:45 |
qi-bot | [commit] Xiangfu Liu: use [yes "" | make oldconfig] http://qi-hw.com/p/openwrt-xburst/e72eac6 | 21:45 |
qi-bot | [commit] Xiangfu Liu: add gforth to config.full_system http://qi-hw.com/p/openwrt-xburst/d4cb34a | 23:09 |
qi-bot | [commit] jow: [package] base-files: add an experimental "-c" flag which tries to preserve *all* changed files in /overlay/etc minus some system files http://qi-hw.com/p/openwrt-xburst/feaf88f | 01:03 |
---|---|---|
qi-bot | [commit] jow: [imagebuilder] http://qi-hw.com/p/openwrt-xburst/67f09fa | 01:03 |
qi-bot | [commit] jow: [imagebuilder] fix arch detection pattern to cope with underscores in board name, e.g. "adm5120_mips" http://qi-hw.com/p/openwrt-xburst/cbcb7e2 | 01:03 |
qi-bot | [commit] jow: [package] util-linux-ng: make build depend on libncurses, cfdisk is compiled unconditionally and will fail with missing input files if ncurses was not detected during configure http://qi-hw.com/p/openwrt-xburst/ba59625 | 01:03 |
qi-bot | [commit] mb: iproute2: Fix compilation http://qi-hw.com/p/openwrt-xburst/9d4993c | 01:03 |
qi-bot | [commit] jow: [package] uhttpd: break tight loop when receiving eof during header reading (#7904) http://qi-hw.com/p/openwrt-xburst/8c59fdd | 01:03 |
qi-bot | [commit] jow: [include] pass opkg offline root as command line arg, solves caching issues when switching between multiple subtargets, thanks Ralph Hempel for reporting http://qi-hw.com/p/openwrt-xburst/5e3ed67 | 01:03 |
qi-bot | [commit] mb: iproute2: Once the make calls were fixed up, parallel compile seems to work well. http://qi-hw.com/p/openwrt-xburst/177f4b1 | 01:03 |
qi-bot | [commit] jow: [imagebuilder] fix a small typo in sed pattern http://qi-hw.com/p/openwrt-xburst/12bb9fe | 01:03 |
qi-bot | [commit] mb: Allow receiving input events even if the X-server grabbed the device. http://qi-hw.com/p/openwrt-xburst/4aff853 | 01:03 |
qi-bot | [commit] mb: Refresh patch http://qi-hw.com/p/openwrt-xburst/2617211 | 01:03 |
qi-bot | [commit] florian: [package] fix acx-mac80211 build failure with latest compat-wireless http://qi-hw.com/p/openwrt-xburst/eba6ff5 | 01:03 |
qi-bot | [commit] florian: [package] update acx-mac80211 to 20100830 http://qi-hw.com/p/openwrt-xburst/60b11dc | 01:03 |
qi-bot | [commit] mb: omap24xx: Add pointercal file http://qi-hw.com/p/openwrt-xburst/1d74d1e | 01:03 |
qi-bot | [commit] mb: omap24xx: Add default network config http://qi-hw.com/p/openwrt-xburst/53687e5 | 01:03 |
qi-bot | [commit] florian: [package] nvvram: no checksum error recording on WRT54G3GV2(-VF) http://qi-hw.com/p/openwrt-xburst/edc292c | 01:03 |
qi-bot | [commit] florian: [buildroot] ccache TARGET_CXX http://qi-hw.com/p/openwrt-xburst/691fd24 | 01:03 |
qi-bot | [commit] jow: [package] 6in4: don't use abbreviated notation for 0.0.0.0/0, iproute apparently does not like it anymore http://qi-hw.com/p/openwrt-xburst/7b3bd12 | 01:03 |
qi-bot | [commit] jow: [package] firewall: http://qi-hw.com/p/openwrt-xburst/c653713 | 01:03 |
qi-bot | [commit] mb: Fix kernel crypto modules for >= 2.6.36 http://qi-hw.com/p/openwrt-xburst/8eeeaa5 | 01:03 |
qi-bot | [commit] kyak: kbd: added kbd console maps http://qi-hw.com/p/openwrt-packages/b754438 | 05:01 |
qi-bot | [commit] kyak: kbd unicode cyrillic map for Ben http://qi-hw.com/p/openwrt-packages/d7307ad | 10:50 |
qi-bot | [commit] Werner Almesberger: Added antenna tuning "tail" suggested by Joerg. Made board slimmer. http://qi-hw.com/p/ben-wpan/b3374dd | 11:45 |
qi-bot | [commit] Werner Almesberger: Moved cam/ to atrf/cam/ http://qi-hw.com/p/ben-wpan/f8ae351 | 11:45 |
qi-bot | [commit] Werner Almesberger: atusd/cam/pcb.pl: updated for new board shape http://qi-hw.com/p/ben-wpan/843a0bc | 11:45 |
qi-bot | [commit] kyak: fbterm depends on fontconfig http://qi-hw.com/p/openwrt-packages/a863278 | 12:54 |
qi-bot | [commit] Werner Almesberger: BOM work in progress. Completed generation of capacitor characteristics. http://qi-hw.com/p/ben-wpan/c0052fa | 16:05 |
qi-bot | [commit] Werner Almesberger: Rename bom/yageo-cap.* to bom/yageo.* to keep things simple. http://qi-hw.com/p/ben-wpan/66e5aa5 | 16:05 |
qi-bot | [commit] Werner Almesberger: Adjusted parsing of component values. Now all capacitors get properly selected. http://qi-hw.com/p/ben-wpan/636011c | 16:05 |
qi-bot | [commit] Werner Almesberger: Moved all capacitor tolerance and _E12_P translations to shared includes. http://qi-hw.com/p/ben-wpan/f2824f1 | 16:05 |
qi-bot | [commit] Werner Almesberger: Added generation of Yageo RC0402 resistors. We can now produce the full BOM. http://qi-hw.com/p/ben-wpan/499df0e | 16:05 |
qi-bot | [commit] Carlos Camargo: aaa http://qi-hw.com/p/nn-usb-fpga/0975cd7 | 20:59 |
qi-bot | [commit] Xiangfu Liu: this u-boot patch fix the c_size. it should 22bit. http://qi-hw.com/p/openwrt-xburst/67f5520 | 02:29 |
---|---|---|
qi-bot | [commit] Niels: don't perform action if a modifier is pressed http://qi-hw.com/p/nanomap/bf6b566 | 03:45 |
qi-bot | [commit] Niels: move handling of application parameters to main.cpp http://qi-hw.com/p/nanomap/4e98efe | 03:45 |
qi-bot | [commit] Niels: add option to skip existing tiles while downloading; based on patch by Mikhail Peselnik http://qi-hw.com/p/nanomap/bfd639f | 03:45 |
qi-bot | [commit] kyak: NanoMap: "skip downloaded tiles" is upstream. http://qi-hw.com/p/openwrt-packages/74176f0 | 04:46 |
qi-bot | [commit] kyak: NanoMap updated to Commit bfd639fd99e6e77cb58b9649a7ddb1c03068ef2d http://qi-hw.com/p/openwrt-packages/0a3c8a2 | 04:54 |
qi-bot | [commit] Wolfgang Spraul: added config.miminal http://qi-hw.com/p/openwrt-xburst/e19e456 | 10:18 |
qi-bot | [commit] Xiangfu Liu: config.full_system: add at, file, gsm-utils, i2c-tools, jpeg-tools http://qi-hw.com/p/openwrt-xburst/ea5d4e5 | 11:18 |
qi-bot | [commit] Werner Almesberger: Updated to do list. http://qi-hw.com/p/ben-wpan/d14e55b | 14:27 |
qi-bot | [commit] Werner Almesberger: atusd/tests/psd*: first transmit power spectral density measurement http://qi-hw.com/p/ben-wpan/4c81175 | 14:27 |
qi-bot | [commit] Werner Almesberger: Removed DTC123JE transistor files. (Was used only in 20100903 design.) http://qi-hw.com/p/ben-wpan/876a5ca | 23:31 |
qi-bot | [commit] Werner Almesberger: Applied clock voltage divider fix and corrected too closely spaced via. http://qi-hw.com/p/ben-wpan/f17613b | 23:31 |
qi-bot | [commit] Werner Almesberger: Added Digi-Key catalog data for automated BOM processing. http://qi-hw.com/p/ben-wpan/6fc656f | 23:31 |
qi-bot | [commit] Werner Almesberger: bom/: automatic BOM generation (work in progress) http://qi-hw.com/p/ben-wpan/1a5d9f5 | 23:31 |
qi-bot | [commit] Werner Almesberger: Corrected small footprint errors. Made 0R "inductor" a resistor. http://qi-hw.com/p/ben-wpan/5d28e1b | 23:31 |
qi-bot | [commit] kyak: sdcv depends on glib2 http://qi-hw.com/p/openwrt-packages/a0edda2 | 02:06 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: make copy zImage automatic, update config.xbboot.README http://qi-hw.com/p/openwrt-xburst/dc6bf6b | 10:36 |
qi-bot | [commit] Xiangfu Liu: [frotz] remove use sytem /tmp dir http://qi-hw.com/p/openwrt-packages/502d2f0 | 11:41 |
qi-bot | [commit] Alan Post: Create package for makfa, the Lojban dictionary. http://qi-hw.com/p/openwrt-packages/f4fa2d5 | 21:54 |
qi-bot | [commit] Werner Almesberger: atusd/atusd.brd: bumped the version to 100908 http://qi-hw.com/p/ben-wpan/284b557 | 08:25 |
---|---|---|
qi-bot | [commit] Werner Almesberger: Updated atusd driver for new hardware. Make use of the interrupt line. http://qi-hw.com/p/ben-wpan/18eec55 | 08:25 |
qi-bot | [commit] Werner Almesberger: New atusd errata and a few small CAM updates. http://qi-hw.com/p/ben-wpan/93f0f40 | 08:25 |
qi-bot | [commit] Werner Almesberger: Improved clock stability by using a capacitative divider and found more minor http://qi-hw.com/p/ben-wpan/6e726d1 | 11:44 |
qi-bot | [commit] Bas Wijnen: mass storage nand almost working http://qi-hw.com/p/iris/87acc47 | 15:50 |
qi-bot | [commit] Werner Almesberger: Cleaned up interrupt handling in atspi-txrx. Report ED. Shut down at end. http://qi-hw.com/p/ben-wpan/9162689 | 16:57 |
qi-bot | [commit] Werner Almesberger: tools/Makefile.common: added quiet compilation http://qi-hw.com/p/ben-wpan/be62416 | 16:57 |
qi-bot | [commit] Werner Almesberger: Make wait_for_interrupt available to all atspi tools. http://qi-hw.com/p/ben-wpan/2a245e1 | 16:57 |
qi-bot | [commit] Werner Almesberger: atspi-rssi cleanup: wait for interrupt, exit cleanly. http://qi-hw.com/p/ben-wpan/4df6d2c | 16:57 |
qi-bot | [commit] Juan64Bits: Kicad labels problem. http://qi-hw.com/p/xue/1cd37e7 | 18:58 |
qi-bot | [commit] Werner Almesberger: Added interrupt polling support for atusb. http://qi-hw.com/p/ben-wpan/b6a80ba | 19:42 |
qi-bot | [commit] Werner Almesberger: Performance comparison of atusb vs. atusd. http://qi-hw.com/p/ben-wpan/0a0a50d | 19:42 |
qi-bot | [commit] Werner Almesberger: Oops. The atusb boards are of course 20100813. 20100902 was the first http://qi-hw.com/p/ben-wpan/b32827d | 19:46 |
qi-bot | [commit] Werner Almesberger: Moved the ECNs from atrf/ecn to the top-level. http://qi-hw.com/p/ben-wpan/d3bc274 | 23:11 |
qi-bot | [commit] Werner Almesberger: New ECN about clock circuit of atusd boards. Measured (absence of) effect of http://qi-hw.com/p/ben-wpan/df071c3 | 23:11 |
qi-bot | [commit] Xiangfu Liu: update gmenu2x version to the last commit http://qi-hw.com/p/openwrt-packages/ec1da6d | 10:11 |
---|---|---|
qi-bot | [commit] Bas Wijnen: trying to simplify things, not working yet http://qi-hw.com/p/iris/3a38ea2 | 12:10 |
qi-bot | [commit] Jiri Brozovsky: First port to OpenWRT: patchet terminal limits. Makred as BROKEN until http://qi-hw.com/p/openwrt-packages/6c8e93b | 14:02 |
qi-bot | [commit] Werner Almesberger: Found out that we can't share MISO and MOSI after all. Redesigned the atusd http://qi-hw.com/p/ben-wpan/3533e04 | 17:04 |
qi-bot | [commit] Xiangfu Liu: add nanomap icon http://qi-hw.com/p/openwrt-xburst/1f4c018 | 22:38 |
qi-bot | [commit] kyak: NanoMap: Add a checkbox to skip downloading already downloaded tiles http://qi-hw.com/p/openwrt-packages/cec8000 | 02:05 |
---|---|---|
qi-bot | [commit] kyak: NanoMap depends on dejavu-fonts-ttf http://qi-hw.com/p/openwrt-packages/f7a7fa5 | 15:14 |
qi-bot | [commit] Werner Almesberger: - tools/lib/atusd.c (atusd_cycle): we never turned power back on ? http://qi-hw.com/p/ben-wpan/406517b | 16:07 |
qi-bot | [commit] Werner Almesberger: Fix board initialization in uSD driver. atspi-id now works. http://qi-hw.com/p/ben-wpan/b25cbd8 | 16:07 |
qi-bot | [commit] Werner Almesberger: Moved schhist2web and friends over to project eda-tools. http://qi-hw.com/p/ben-wpan/002941d | 16:07 |
qi-bot | [commit] Xiangfu Liu: disselect the exo package. http://qi-hw.com/p/openwrt-xburst/12f1f25 | 22:37 |
qi-bot | [commit] Xiangfu Liu: to make gpgme work at least the path to the gpg binary has to be set... http://qi-hw.com/p/openwrt-packages/e6125bb | 22:54 |
qi-bot | [commit] Xiangfu Liu: add some sample music file. http://qi-hw.com/p/openwrt-xburst/e39e43e | 02:28 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: update config to use uClibc 0.9.30.1, change VERSION to 2010-09-06 http://qi-hw.com/p/openwrt-xburst/0b9c16f | 02:28 |
qi-bot | [commit] Xiangfu Liu: [poke] remove BROKEN, update to r5975 http://qi-hw.com/p/openwrt-packages/807277d | 05:17 |
qi-bot | [commit] Xiangfu Liu: rename the config to config.full_system http://qi-hw.com/p/openwrt-xburst/49ac818 | 08:26 |
qi-bot | [commit] Xiangfu Liu: select ImageBuilder, Toolchain, SDK http://qi-hw.com/p/openwrt-xburst/4c4035c | 10:10 |
qi-bot | [commit] Xiangfu Liu: enable the IPV6 option http://qi-hw.com/p/openwrt-xburst/1566c3b | 10:10 |
qi-bot | [commit] Xiangfu Liu: include [sox] and [poke] http://qi-hw.com/p/openwrt-xburst/19ee485 | 10:10 |
qi-bot | [commit] Xiangfu Liu: switch uClibc 0.9.30 to 0.9.32 http://qi-hw.com/p/openwrt-xburst/2af4183 | 10:10 |
qi-bot | [commit] Xiangfu Liu: include qt4-* package http://qi-hw.com/p/openwrt-xburst/b9f0c00 | 10:10 |
qi-bot | [commit] bartbes: New version of nlove (0.0.2) http://qi-hw.com/p/openwrt-packages/ef090fa | 12:47 |
qi-bot | [commit] kyak: stardict actually depends on gtk2 http://qi-hw.com/p/openwrt-packages/dbd4afd | 15:36 |
qi-bot | [commit] kyak: Merge branch 'master' of projects.qi-hardware.com:openwrt-packages http://qi-hw.com/p/openwrt-packages/4ee7a75 | 15:36 |
qi-bot | [commit] Carlos Camargo: Adding LUA tutorials: lua_calls_C1 - lua_calls_C5 http://qi-hw.com/p/nn-usb-fpga/7d9b7b8 | 21:27 |
qi-bot | [commit] Carlos Camargo: Removing jz_test_gpio.c file from lua examples. http://qi-hw.com/p/nn-usb-fpga/5a6f0b5 | 21:51 |
qi-bot | [commit] Carlos Camargo: Enabling Set port and pin in blinker example http://qi-hw.com/p/nn-usb-fpga/91fdaa2 | 21:51 |
qi-bot | [commit] Carlos Camargo: Some changes to lua's blink demo http://qi-hw.com/p/nn-usb-fpga/d01e4f4 | 22:27 |
qi-bot | [commit] Juan64Bits: Routing attiny. http://qi-hw.com/p/xue/1e22c59 | 22:28 |
qi-bot | [commit] Xiangfu Liu: [snownews] update Makefile EXTRA_CFLAGS http://qi-hw.com/p/openwrt-packages/9c8ef96 | 08:48 |
---|---|---|
qi-bot | [commit] bartbes: Added nlove package http://qi-hw.com/p/openwrt-packages/1b84af0 | 09:05 |
qi-bot | [commit] Xiangfu Liu: add some wallpapers http://qi-hw.com/p/gmenu2x/09e31c1 | 09:33 |
qi-bot | [commit] Xiangfu Liu: add config.2010-09-05 http://qi-hw.com/p/openwrt-xburst/b0f0f8c | 09:40 |
qi-bot | [commit] kyak: centerim's configure now looking for libopenssl in the right place http://qi-hw.com/p/openwrt-packages/2c5709d | 10:28 |
qi-bot | [commit] Xiangfu Liu: add some wallpapers, http://qi-hw.com/p/gmenu2x/b41d0a1 | 11:01 |
qi-bot | [commit] Xiangfu Liu: add the Picture URL file README, http://qi-hw.com/p/gmenu2x/0775638 | 11:01 |
qi-bot | [commit] Xiangfu Liu: [gmenu2x] update to 077563 http://qi-hw.com/p/openwrt-packages/4864c15 | 11:02 |
qi-bot | [commit] Yanjun Luo: The first version send to factory. http://qi-hw.com/p/mmone-jtag-serial-cable/82c93b6 | 12:24 |
qi-bot | [commit] bartbes: Added lua dependency to nlove http://qi-hw.com/p/openwrt-packages/11291fd | 13:09 |
qi-bot | [commit] bartbes: Merge branch 'master' of projects.qi-hardware.com:openwrt-packages http://qi-hw.com/p/openwrt-packages/7b6b74c | 13:09 |
qi-bot | [commit] Werner Almesberger: Next part of board bringup: reset and power cycling. http://qi-hw.com/p/ben-wpan/a18d596 | 13:10 |
qi-bot | [commit] Maarten ter Huurne: Replace/remove SOC_JZ4740 from Kconfigs. http://qi-hw.com/p/qi-kernel/9bd95f3 | 14:57 |
qi-bot | [commit] Werner Almesberger: Board bringup: talk to the chip and read IDs. http://qi-hw.com/p/ben-wpan/9ad96bd | 16:10 |
qi-bot | [commit] Werner Almesberger: Moved tools/ out of atrf, in preparation of merge with atusd. http://qi-hw.com/p/ben-wpan/36e73c4 | 19:52 |
qi-bot | [commit] Werner Almesberger: Made the libatspi API driver-agnostic. http://qi-hw.com/p/ben-wpan/e2b2df2 | 19:52 |
qi-bot | [commit] Werner Almesberger: Merged uSD driver into unified tool build, completed conversion of tools. http://qi-hw.com/p/ben-wpan/f20d685 | 19:52 |
qi-bot | [commit] Werner Almesberger: Further cleanup to make the tools build for the "ben" target. http://qi-hw.com/p/ben-wpan/bb65155 | 19:52 |
qi-bot | [commit] Xiangfu Liu: [new package] poke, Read or write any CPU register http://qi-hw.com/p/openwrt-packages/ff38e98 | 23:38 |
qi-bot | [commit] florian: [kernel] add missing CONFIG_PCMCIA_XIRCOM spotted by buildbot http://qi-hw.com/p/openwrt-xburst/c162408 | 01:27 |
---|---|---|
qi-bot | [commit] acoul: ixp4xx: revert kernel support for 2.6.33 & 2.6.35 http://qi-hw.com/p/openwrt-xburst/103e240 | 01:27 |
qi-bot | [commit] acoul: ixp4xx: add kernel 2.6.33 preliminary support http://qi-hw.com/p/openwrt-xburst/7761517 | 01:27 |
qi-bot | [commit] acoul: ixp4xx: add Titan Wireless TW-266-2 support http://qi-hw.com/p/openwrt-xburst/76f501d | 01:27 |
qi-bot | [commit] acoul: ixp4xx: fix MAC parsing and switch (unmanaged) functionality for wrt300nv2 (thank you Ernesto Elbe) http://qi-hw.com/p/openwrt-xburst/75c6116 | 01:27 |
qi-bot | [commit] acoul: ixp4xx: add Mikael Petterssons patch works http://qi-hw.com/p/openwrt-xburst/12c3f05 | 01:27 |
qi-bot | [commit] acoul: ixp4xx: add kernel 2.6.35 preliminary support http://qi-hw.com/p/openwrt-xburst/5803cbb | 01:27 |
qi-bot | [commit] acoul: mpc83xx: add kernel 2.6.35 preliminary support http://qi-hw.com/p/openwrt-xburst/fb2c10f | 01:27 |
qi-bot | [commit] acoul: ixp4xx: remove 2.6.35 unedded patches http://qi-hw.com/p/openwrt-xburst/042aac4 | 01:27 |
qi-bot | [commit] hcg: Use modules for wifi and usb http://qi-hw.com/p/openwrt-xburst/b5b97a4 | 01:27 |
qi-bot | [commit] hcg: Add script support for Marvell 88W8686 mac80211. http://qi-hw.com/p/openwrt-xburst/d04b55e | 01:27 |
qi-bot | [commit] jow: [package] ppp: interpret "demand" option as timeout in seconds (#7517) http://qi-hw.com/p/openwrt-xburst/2d6dd9f | 01:27 |
qi-bot | [commit] juhosg: ar71xx: don't use vlan 0 for devices with rtl8366s switch http://qi-hw.com/p/openwrt-xburst/326a959 | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: prevent modifications of VLAN 0 http://qi-hw.com/p/openwrt-xburst/b710df9 | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: fix register offset and size of MIB counters http://qi-hw.com/p/openwrt-xburst/d927216 | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: don't show link parameters if the link is down http://qi-hw.com/p/openwrt-xburst/062819b | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: change format string for debugfs error messages http://qi-hw.com/p/openwrt-xburst/36c0080 | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: introduce rtl8366_smi_ops http://qi-hw.com/p/openwrt-xburst/d2c03b9 | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: move mii bus handling to the rtl8366_smi code http://qi-hw.com/p/openwrt-xburst/5e66606 | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: use struct rtl8366_smi for phy_reg_{read,write} calls http://qi-hw.com/p/openwrt-xburst/5e0f4e5 | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: rename vlanmc and vlan4k related structures an functions http://qi-hw.com/p/openwrt-xburst/70e2bfc | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: add common vlan_mc structure http://qi-hw.com/p/openwrt-xburst/53bb5d1 | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: add common vlan_4k structure http://qi-hw.com/p/openwrt-xburst/22e4a85 | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: use struct rtl8366_smi instead of struct rtl8366{s,rb} http://qi-hw.com/p/openwrt-xburst/d911423 | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: cleanup MIB counter printing http://qi-hw.com/p/openwrt-xburst/22a6beb | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366s: get some MIB counters from another offset http://qi-hw.com/p/openwrt-xburst/f816719 | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: introduce rtl8366_smi_rmwr function http://qi-hw.com/p/openwrt-xburst/0b58bc0 | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: add hw_init to initialize registers after reset http://qi-hw.com/p/openwrt-xburst/693c0bd | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: update vlan handling code of rtl8366rb http://qi-hw.com/p/openwrt-xburst/605e142 | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: update vlan handling code for rtl8366s http://qi-hw.com/p/openwrt-xburst/a5193c8 | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: rename vlan debugfs file to vlan_mc, and clean up it's format http://qi-hw.com/p/openwrt-xburst/dd5918a | 01:27 |
qi-bot | [commit] nbd: mac80211: update to wireless-testing 2010-06-15 http://qi-hw.com/p/openwrt-xburst/922f7b0 | 01:27 |
qi-bot | [commit] nbd: remove brcm47xx symlinks to brcm-2.4 (unfortunately svn does not allow a proper type changing commit) http://qi-hw.com/p/openwrt-xburst/c791c2b | 01:27 |
qi-bot | [commit] nbd: add back the base-files/image code from brcm-2.4 to brcm47xx http://qi-hw.com/p/openwrt-xburst/08944ed5 | 01:27 |
qi-bot | [commit] nbd: remove the brcm-2.4 target, it will no longer be supported in future releases. please use brcm47xx with broadcom-wl instead http://qi-hw.com/p/openwrt-xburst/1fe4998 | 01:27 |
qi-bot | [commit] nbd: remove the old broadcom wl driver for linux 2.4 http://qi-hw.com/p/openwrt-xburst/4b7db99 | 01:27 |
qi-bot | [commit] nbd: remove generic linux 2.4 support http://qi-hw.com/p/openwrt-xburst/eb81d2d | 01:27 |
qi-bot | [commit] nbd: remove a few packages which only work with linux 2.4 http://qi-hw.com/p/openwrt-xburst/93e7bbf | 01:27 |
qi-bot | [commit] nbd: remove linux 2.4 kernel versions http://qi-hw.com/p/openwrt-xburst/3e52dbd | 01:27 |
qi-bot | [commit] nbd: remove linux 2.4 specific build system code http://qi-hw.com/p/openwrt-xburst/7ec88f8 | 01:27 |
qi-bot | [commit] nbd: rename target/linux/generic-2.6 to generic http://qi-hw.com/p/openwrt-xburst/c5552ad | 01:27 |
qi-bot | [commit] nbd: remove broadcom-57xx (only used on linux 2.4) http://qi-hw.com/p/openwrt-xburst/75bd418 | 01:27 |
qi-bot | [commit] nbd: remove linux 2.4 support from several packages http://qi-hw.com/p/openwrt-xburst/fef8176 | 01:27 |
qi-bot | [commit] nbd: remove gcc 3.4.6 http://qi-hw.com/p/openwrt-xburst/74c8c79 | 01:27 |
qi-bot | [commit] nbd: remove obsolete kernel dependencies and version checks http://qi-hw.com/p/openwrt-xburst/5b8b96e | 01:27 |
qi-bot | [commit] nbd: remove support for building kernel headers with old kernels http://qi-hw.com/p/openwrt-xburst/45d7da3 | 01:27 |
qi-bot | [commit] florian: [scripts] make flashing scripts executable http://qi-hw.com/p/openwrt-xburst/3c361ea | 01:27 |
qi-bot | [commit] florian: [au1000] reinstate 2.6.30 support until 2.6.32 is fixed http://qi-hw.com/p/openwrt-xburst/8cc6d2b | 01:27 |
qi-bot | [commit] nbd: set the default target to brcm47xx, now that brcm-2.4 is gone http://qi-hw.com/p/openwrt-xburst/b4e1fa1 | 01:27 |
qi-bot | [commit] cshore: busybox: Fixed remote logging bug in which starting syslog before the network (and hence the remote host being available) results in failure to do any remote logging http://qi-hw.com/p/openwrt-xburst/03dd7f3 | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366rb: fix MIB counter reset http://qi-hw.com/p/openwrt-xburst/dfa85e2 | 01:27 |
qi-bot | [commit] juhosg: rt2x00: cleanup patches http://qi-hw.com/p/openwrt-xburst/3b42893 | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: use RTL8366{S,RB} prefixes for all defines http://qi-hw.com/p/openwrt-xburst/e05b25a | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: add VLAN handling functions to rtl8366_smi_ops http://qi-hw.com/p/openwrt-xburst/a81c90d | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: add cpu_port, num_ports and num_vlan_mc to struct rtl8366_smi http://qi-hw.com/p/openwrt-xburst/7a3a11a | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: move common VLAN handling functions to rtl8366_smi.c http://qi-hw.com/p/openwrt-xburst/30a7cdf | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: move buf to struct rtl8366_smi http://qi-hw.com/p/openwrt-xburst/d59f0a0 | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: move common debugfs code to rtl8366_smi.c http://qi-hw.com/p/openwrt-xburst/18ab2ef | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: use common rtl8366_mib_counter structure http://qi-hw.com/p/openwrt-xburst/41d0260 | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: standardize read_debugfs_mibs functions http://qi-hw.com/p/openwrt-xburst/aaf0b37 | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: add common read_debugfs_mibs function http://qi-hw.com/p/openwrt-xburst/d357a4c | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: minor cleanup http://qi-hw.com/p/openwrt-xburst/302f3c0 | 01:27 |
qi-bot | [commit] markus: fixed trx version to handling http://qi-hw.com/p/openwrt-xburst/ea4702f | 01:27 |
qi-bot | [commit] cshore: block-mount: Fixed mount deadlocks due to buggy use of locks in /lib/functions/block.sh http://qi-hw.com/p/openwrt-xburst/e874a71 | 01:27 |
qi-bot | [commit] nbd: mac80211: update to wireless-testing 2010-06-28 http://qi-hw.com/p/openwrt-xburst/d1e3d41 | 01:27 |
qi-bot | [commit] nbd: ath9k: fix TSF across hardware resets on AR913x http://qi-hw.com/p/openwrt-xburst/997e6d9 | 01:27 |
qi-bot | [commit] acoul: mac80211: fix compile issues on 2.6.35 http://qi-hw.com/p/openwrt-xburst/19776eb | 01:27 |
qi-bot | [commit] claudio: [at91] Add board definition previously forgotten http://qi-hw.com/p/openwrt-xburst/91107b9 | 01:27 |
qi-bot | [commit] acoul: mac80211: fix r21990 http://qi-hw.com/p/openwrt-xburst/324d3e9 | 01:27 |
qi-bot | [commit] claudio: [kernel] Don't force pci support on .34 and .35 http://qi-hw.com/p/openwrt-xburst/c70ebb4 | 01:27 |
qi-bot | [commit] acoul: fix commit r21993 http://qi-hw.com/p/openwrt-xburst/47e09d3 | 01:27 |
qi-bot | [commit] acoul: fix commit r21994 (thanks juhosg) http://qi-hw.com/p/openwrt-xburst/b6ff7d4 | 01:27 |
qi-bot | [commit] acoul: package/iptables: fix compile failure on gentoo build system (thanks nbd) http://qi-hw.com/p/openwrt-xburst/7ebf9e7 | 01:27 |
qi-bot | [commit] jow: [package] broadcom-wl: align wpa encryption value and cipher override format with hostapd.sh http://qi-hw.com/p/openwrt-xburst/5794fe5 | 01:27 |
qi-bot | [commit] jow: [package] hostapd: allow *ccmp+tkip and *aes+tkip as well for cipher override http://qi-hw.com/p/openwrt-xburst/b49acf1 | 01:27 |
qi-bot | [commit] nbd: ath9k: add initval updates - should increase stability and performance on AR91xx and AR92xx http://qi-hw.com/p/openwrt-xburst/4b1a63c | 01:27 |
qi-bot | [commit] jow: [package] hostapd: enforce CCMP WPA cipher if hwmode is 11ng or 11na http://qi-hw.com/p/openwrt-xburst/60a32ce | 01:27 |
qi-bot | [commit] cshore: block-extroot, block-mount: Fixed multiple bugs which prevented e2fsck from being executed on the external root filesystem before mounting it as root. Added /etc/e2fsck.conf which indicates that the clock is broken (since most OpenWRT devices don't have a battery backed RTC) so that e2fsck will not exit with fatal error when the rdat has not yet been run (i.e. before network). http://qi-hw.com/p/openwrt-xburst/7bc978b | 01:27 |
qi-bot | [commit] jow: [package] base-files: add "mtu" option for route sections, allows setting per-route mtu values http://qi-hw.com/p/openwrt-xburst/0218c10 | 01:27 |
qi-bot | [commit] jow: [ar71xx] fix dir-825-b1 default network config after r21905 http://qi-hw.com/p/openwrt-xburst/51c76d8 | 01:27 |
qi-bot | [commit] jow: [package] broadcom-wl: http://qi-hw.com/p/openwrt-xburst/db7c7e9 | 01:27 |
qi-bot | [commit] jow: [package] broadcom-wl: update to v5.10.56.27.1, initial brcm63xx (MIPS BE) support http://qi-hw.com/p/openwrt-xburst/fe1160e | 01:27 |
qi-bot | [commit] jow: [brcm63xx] add a wifi profile for proprietary wl http://qi-hw.com/p/openwrt-xburst/5ec8fc4 | 01:27 |
qi-bot | [commit] florian: [au1000] revert upstream commit that broke PCI until we have a better fix http://qi-hw.com/p/openwrt-xburst/134e9e7 | 01:27 |
qi-bot | [commit] markus: preset stable and try* flags for TRX2 headers http://qi-hw.com/p/openwrt-xburst/0df7081 | 01:27 |
qi-bot | [commit] markus: renamed wrt54g3gv2-vf images http://qi-hw.com/p/openwrt-xburst/0cfd641 | 01:27 |
qi-bot | [commit] juhosg: firmware-utils/mktplinkfw: add support for the TL-WA901ND http://qi-hw.com/p/openwrt-xburst/e5e2a4f | 01:27 |
qi-bot | [commit] juhosg: ar71xx: fix leds-rb750 build failure on 2.6.34 http://qi-hw.com/p/openwrt-xburst/17cb46c | 01:27 |
qi-bot | [commit] markus: fix GPIO pin for G3GV2-VF http://qi-hw.com/p/openwrt-xburst/c9722e5 | 01:27 |
qi-bot | [commit] markus: brcm47xx: added dual image support to flashmap driver http://qi-hw.com/p/openwrt-xburst/4fd65ea | 01:27 |
qi-bot | [commit] florian: [au1000] fix PCI, thanks br1, put back 2.6.32.14 support by default http://qi-hw.com/p/openwrt-xburst/382532e | 01:27 |
qi-bot | [commit] nbd: ath9k: properly sanitize calibrated noise floor values on all hardware http://qi-hw.com/p/openwrt-xburst/98525c0 | 01:27 |
qi-bot | [commit] nbd: ath9k: add a missing null pointer check and some further cleanup http://qi-hw.com/p/openwrt-xburst/9b83933 | 01:27 |
qi-bot | [commit] nbd: ath9k: clean up some code duplication related to noise floor handling http://qi-hw.com/p/openwrt-xburst/c500f2e | 01:27 |
qi-bot | [commit] nbd: ath9k: fix false positives in the baseband hang check by repeating the test a few times before pronouncing the hardware dead and resetting it http://qi-hw.com/p/openwrt-xburst/7d97750 | 01:27 |
qi-bot | [commit] florian: [au1000] fix line wrapped patch http://qi-hw.com/p/openwrt-xburst/cd6d6cb | 01:27 |
qi-bot | [commit] florian: [au1000] add 2.6.34 support http://qi-hw.com/p/openwrt-xburst/c7a0965 | 01:27 |
qi-bot | [commit] florian: [kernel] refresh 2.6.34 patches http://qi-hw.com/p/openwrt-xburst/e9d9a84 | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: enable VLAN ingress filtering http://qi-hw.com/p/openwrt-xburst/e11397b | 01:27 |
qi-bot | [commit] nbd: ath9k: fix a crash with WEP in ad-hoc mode http://qi-hw.com/p/openwrt-xburst/6493866 | 01:27 |
qi-bot | [commit] nbd: ath9k: fix a potential buffer leak http://qi-hw.com/p/openwrt-xburst/3077966 | 01:27 |
qi-bot | [commit] nbd: add missing dependencies for hostapd-utils and wpa-cli (#7421) http://qi-hw.com/p/openwrt-xburst/3e4cfbc | 01:27 |
qi-bot | [commit] nbd: ag71xx: fix a memory corruption bug that happens if you flood the interface with packets while it's being brought down http://qi-hw.com/p/openwrt-xburst/950d12e | 01:27 |
qi-bot | [commit] nbd: ag71xx: reset the hardware during open(), this improves recovery from tx timeouts on ar724x considerably http://qi-hw.com/p/openwrt-xburst/d856215 | 01:27 |
qi-bot | [commit] nbd: mini_fo: add error pointer checks after dentry lookups to fix various crash bugs (fixes #7277, #7207, #7259) http://qi-hw.com/p/openwrt-xburst/14cab98 | 01:27 |
qi-bot | [commit] nbd: add mini_fo fix to 2.6.30 as well http://qi-hw.com/p/openwrt-xburst/5e77153 | 01:27 |
qi-bot | [commit] jow: [package] comgt: add usb hotplug handler to bring up 3g ifaces on boot or when the dongle is attached http://qi-hw.com/p/openwrt-xburst/b11b5fb | 01:27 |
qi-bot | [commit] acoul: package/busybox: fix sed issue with gcc-4.5.0 (closes #7566) http://qi-hw.com/p/openwrt-xburst/35ba8b6 | 01:27 |
qi-bot | [commit] nbd: ar71xx: only reinit the ethernet MAC at .open() on ar724x for now, until we've figured out what part of it causes the issue described in #7563 http://qi-hw.com/p/openwrt-xburst/f381433 | 01:27 |
qi-bot | [commit] nbd: mac80211: fix interface teardown for kernels >= 2.6.33 http://qi-hw.com/p/openwrt-xburst/3cb4900 | 01:27 |
qi-bot | [commit] nbd: repair the damage that was done to the packet socket type filter patch when it was forward ported to 2.6.33 http://qi-hw.com/p/openwrt-xburst/9b8cc43 | 01:27 |
qi-bot | [commit] hauke: kernel: add missing config option found by buildbot http://qi-hw.com/p/openwrt-xburst/e47303d | 01:27 |
qi-bot | [commit] hcg: [omap35xx] Add kmod-usb-hid http://qi-hw.com/p/openwrt-xburst/e22bf04 | 01:27 |
qi-bot | [commit] hcg: crda: remove superfluous dependency http://qi-hw.com/p/openwrt-xburst/8c4271d | 01:27 |
qi-bot | [commit] nbd: mac80211: update to wireless-testing 2010-07-06, add another patch to finally fix the annoying buffer leak in ath9k http://qi-hw.com/p/openwrt-xburst/9f4c286 | 01:27 |
qi-bot | [commit] hcg: gumstix: add luci http://qi-hw.com/p/openwrt-xburst/8fe0e73 | 01:27 |
qi-bot | [commit] hcg: add --trust-server-cert to svn checkout of feeds http://qi-hw.com/p/openwrt-xburst/742744a | 01:27 |
qi-bot | [commit] hcg: Added --non-interactive flag to svn package downloads http://qi-hw.com/p/openwrt-xburst/1a5f926 | 01:27 |
qi-bot | [commit] hcg: Revert r22094 and r22095 http://qi-hw.com/p/openwrt-xburst/be6c9f2 | 01:27 |
qi-bot | [commit] nbd: hostapd: update to 2010-07-05 http://qi-hw.com/p/openwrt-xburst/fdc17c5 | 01:27 |
qi-bot | [commit] nbd: hostapd: enable WPS for the full version of hostapd/wpa_supplicant/wpad http://qi-hw.com/p/openwrt-xburst/49a3b6a | 01:27 |
qi-bot | [commit] nbd: wifi: fix duplicate ht capabilities in the hostapd config file by clearing the list at config load time http://qi-hw.com/p/openwrt-xburst/098781b | 01:27 |
qi-bot | [commit] nbd: hostapd: add preliminary wps script support (push-button only, does not handle multi-bss yet) http://qi-hw.com/p/openwrt-xburst/115b6d5 | 01:27 |
qi-bot | [commit] nbd: hostapd: make rfkill support optional http://qi-hw.com/p/openwrt-xburst/221490f | 01:27 |
qi-bot | [commit] jow: [package] 6in4: automatically determine wan interface in hotplug events http://qi-hw.com/p/openwrt-xburst/7742ebe | 01:27 |
qi-bot | [commit] claudio: [at91] add some missing symbols http://qi-hw.com/p/openwrt-xburst/7692658 | 01:27 |
qi-bot | [commit] claudio: [etrax] fix a bug inside usb driver, thanks to Jesper Nilsson http://qi-hw.com/p/openwrt-xburst/ea1ef33 | 01:27 |
qi-bot | [commit] nbd: Get rid of the b44 'BUG! Timeout waiting for bit 80000000 of register 428 to clear.' spam. http://qi-hw.com/p/openwrt-xburst/59da09e | 01:27 |
qi-bot | [commit] nbd: broadcom-diag: detect more variants of SimpleTech SimpleShare http://qi-hw.com/p/openwrt-xburst/9aaa8ff | 01:27 |
qi-bot | [commit] nbd: brcm47xx: fix a small copy&paste error in the b44 fix for 2.6.34 and 2.6.35 http://qi-hw.com/p/openwrt-xburst/f231b38 | 01:27 |
qi-bot | [commit] hauke: kernel: update to kernel 2.6.34.1 http://qi-hw.com/p/openwrt-xburst/30feff8 | 01:27 |
qi-bot | [commit] hauke: brcm47xx: use kernel 2.6.34.1 as default kernel http://qi-hw.com/p/openwrt-xburst/af2bb2e | 01:27 |
qi-bot | [commit] nbd: ath9k: add another batch of stability updates and misc fixes http://qi-hw.com/p/openwrt-xburst/b03d47c | 01:27 |
qi-bot | [commit] claudio: [at91] fix typo in Makefile tgz -> targz http://qi-hw.com/p/openwrt-xburst/f845016 | 01:27 |
qi-bot | [commit] nbd: ath9k: improve reliability of the noise floor calibration http://qi-hw.com/p/openwrt-xburst/e62c809 | 01:27 |
qi-bot | [commit] claudio: [at91] add defautl config for eth0 http://qi-hw.com/p/openwrt-xburst/b9ca13b | 01:27 |
qi-bot | [commit] claudio: [etrax] enable usb support by default. http://qi-hw.com/p/openwrt-xburst/453df53 | 01:27 |
qi-bot | [commit] claudio: [kernel] kmod-usb-core is buildin on etrax target http://qi-hw.com/p/openwrt-xburst/b40bc28 | 01:27 |
qi-bot | [commit] nbd: ath9k: remove support for hardware which was never sold. reduces binary size by ~30k http://qi-hw.com/p/openwrt-xburst/3a46cb8 | 01:27 |
qi-bot | [commit] hauke: kernel: add missing dma_dev member to struct ssb_device to make b43/b43legacy compile with current mac80211 version http://qi-hw.com/p/openwrt-xburst/a04d4f8 | 01:27 |
qi-bot | [commit] hauke: kernel: Add missing kernel config options http://qi-hw.com/p/openwrt-xburst/023534e | 01:27 |
qi-bot | [commit] hauke: kernel: fix build problems with recent kernel versions http://qi-hw.com/p/openwrt-xburst/0fac63b | 01:27 |
qi-bot | [commit] hauke: broadcom-wl: fix compiling with kernel 2.6.35 http://qi-hw.com/p/openwrt-xburst/f9840c8 | 01:27 |
qi-bot | [commit] hauke: kernel: modules names changed with kernel 2.6.35 http://qi-hw.com/p/openwrt-xburst/24a6afd | 01:27 |
qi-bot | [commit] claudio: [kernel] pwm: use coherent naming to avoid conflicts http://qi-hw.com/p/openwrt-xburst/5c39ae2 | 01:27 |
qi-bot | [commit] claudio: [kernel] Add package for gpio-pwm http://qi-hw.com/p/openwrt-xburst/4747359 | 01:27 |
qi-bot | [commit] claudio: [kernel] Add package for gpio rotary encoder http://qi-hw.com/p/openwrt-xburst/d63165a | 01:27 |
qi-bot | [commit] claudio: massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950 http://qi-hw.com/p/openwrt-xburst/ae57d88 | 01:27 |
qi-bot | [commit] nico: partially revert [22145], keep LINUX_KMOD_SUFFIX, needed to build external modules in ./packages http://qi-hw.com/p/openwrt-xburst/86bb57e | 01:27 |
qi-bot | [commit] cshore: [package]: block-mount: Enable swap before doing fsck so that large filesystem checks have swap as well as memory (as they take large memory for large partitions). Closes #7599. http://qi-hw.com/p/openwrt-xburst/52993b9 | 01:27 |
qi-bot | [commit] cshore: [package]: block-mount: Fixed two bugs in fstab.init. /etc/fstab was used where /tmp/fstab should have been, and locking was insufficiently careful and was such that it could result in deadlock when hotplug was in use. http://qi-hw.com/p/openwrt-xburst/36d52e8 | 01:27 |
qi-bot | [commit] cshore: [package] block-mount: Attempt swapon a after mounting as well as before. This ensures that swap on a filesystem is enabled. http://qi-hw.com/p/openwrt-xburst/c98e83d | 01:27 |
qi-bot | [commit] nbd: mac80211: improve reliability of the keymiss handling fix, add another aggregation leak fix http://qi-hw.com/p/openwrt-xburst/372c8c5 | 01:27 |
qi-bot | [commit] jow: [kernel] export SSB fallback SPROM - required for wl.ko http://qi-hw.com/p/openwrt-xburst/be1d1d9 | 01:27 |
qi-bot | [commit] juhosg: tools/firmware-utils: enhance mktplinkfw utility http://qi-hw.com/p/openwrt-xburst/c439025 | 01:27 |
qi-bot | [commit] juhosg: ramips: sync kernel config http://qi-hw.com/p/openwrt-xburst/76ca646 | 01:27 |
qi-bot | [commit] juhosg: ramips: protect GPIO register access with a spinlock http://qi-hw.com/p/openwrt-xburst/675367f | 01:27 |
qi-bot | [commit] juhosg: ramips: Fix bridging in ramips ethernet driver http://qi-hw.com/p/openwrt-xburst/fa4dd3d | 01:27 |
qi-bot | [commit] jow: [package] broadcom-wl: http://qi-hw.com/p/openwrt-xburst/c2f4d2e | 01:27 |
qi-bot | [commit] jow: [brcm63xx] add required exports for wl.ko http://qi-hw.com/p/openwrt-xburst/fab9e74 | 01:27 |
qi-bot | [commit] jow: [package] broadcom-wl: fix md5sums http://qi-hw.com/p/openwrt-xburst/e5dbd62 | 01:27 |
qi-bot | [commit] nbd: enable ipv6 support for packages by default http://qi-hw.com/p/openwrt-xburst/0859bbd | 01:27 |
qi-bot | [commit] cshore: [brcm47xx]: target (base-files): Fixed failsafe mode by adding back insmod diag http://qi-hw.com/p/openwrt-xburst/8ec9d56 | 01:27 |
qi-bot | [commit] juhosg: ar71xx: in-flash macs and eeprom for mach-eap7660d http://qi-hw.com/p/openwrt-xburst/e14f929 | 01:27 |
qi-bot | [commit] juhosg: ath5k: in-flash macs and eeprom for mach-eap7660d http://qi-hw.com/p/openwrt-xburst/b518ed3 | 01:27 |
qi-bot | [commit] juhosg: generic: move ath5k_platform.h from ar71xx to generic files http://qi-hw.com/p/openwrt-xburst/e528e02 | 01:27 |
qi-bot | [commit] juhosg: madwifi: in-flash macs for mach-eap7660d http://qi-hw.com/p/openwrt-xburst/f6814dd | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: use SWITCH_TYPE_NOVAL for reset_mib attributes http://qi-hw.com/p/openwrt-xburst/c267853 | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: get rid of private vlan_{mc,4k} structs http://qi-hw.com/p/openwrt-xburst/320e8ef | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: move switch device to the rtl8366_smi struct http://qi-hw.com/p/openwrt-xburst/e2d4331 | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: get rid of private rtl8366{s,rb} structs http://qi-hw.com/p/openwrt-xburst/a8fb744 | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: introduce rtl8366_smi_alloc http://qi-hw.com/p/openwrt-xburst/ec78357 | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: add setup to rtl8366_smi_ops struct http://qi-hw.com/p/openwrt-xburst/e920aac | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: add common rtl8366_sw_{get,set}_port_pvid functions http://qi-hw.com/p/openwrt-xburst/6938bc0 | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: make rtl8366_{g,s}et_pvid static http://qi-hw.com/p/openwrt-xburst/b956ede | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: generealize rtl8366{s,rb}_sw_get_port_mib functions http://qi-hw.com/p/openwrt-xburst/a072aff | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: add common rtl8366_sw_get_port_mib function http://qi-hw.com/p/openwrt-xburst/5476411 | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: add is_vlan_valid function to smi_ops http://qi-hw.com/p/openwrt-xburst/fc85856 | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: use smi->num_ports and smi->ops->get_vlan_4k http://qi-hw.com/p/openwrt-xburst/4bcb729 | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: add common rtl8366_sw_get_vlan_info http://qi-hw.com/p/openwrt-xburst/dac77d2 | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: add common rtl8366_sw_{get,set}_vlan_ports functions http://qi-hw.com/p/openwrt-xburst/8007d48 | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: make rtl8366_set_vlan static http://qi-hw.com/p/openwrt-xburst/12e4b34 | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: add debugfs file to show PVIDs http://qi-hw.com/p/openwrt-xburst/6002af8 | 01:27 |
qi-bot | [commit] juhosg: ramips: add mdio_cfg configuration for the ethernet driver http://qi-hw.com/p/openwrt-xburst/12e2f4a | 01:27 |
qi-bot | [commit] juhosg: ramips: add generic ethernet device for the RT288x http://qi-hw.com/p/openwrt-xburst/4c2865e | 01:27 |
qi-bot | [commit] juhosg: ramips: register ethernet device on the RT-N15 http://qi-hw.com/p/openwrt-xburst/7b74a28 | 01:27 |
qi-bot | [commit] juhosg: ramips: enable ethernet driver for rt288x http://qi-hw.com/p/openwrt-xburst/6236135 | 01:27 |
qi-bot | [commit] jow: [package] firewall: http://qi-hw.com/p/openwrt-xburst/e3060b6 | 01:27 |
qi-bot | [commit] jow: [package] firewall: fix another notrack related bug http://qi-hw.com/p/openwrt-xburst/30853c8 | 01:27 |
qi-bot | [commit] jow: [package] dnsmasq: add and enable DNS rebind protections http://qi-hw.com/p/openwrt-xburst/70f06b0 | 01:27 |
qi-bot | [commit] jow: [package] firewall: allow redirecting only destination port (#7197) http://qi-hw.com/p/openwrt-xburst/5fbf6ca | 01:27 |
qi-bot | [commit] jow: [package] iptables: package hashlimit module (#6696) http://qi-hw.com/p/openwrt-xburst/3ba9b8e | 01:27 |
qi-bot | [commit] hcg: Add a profile including Jamvm for Gumstix http://qi-hw.com/p/openwrt-xburst/48f8166 | 01:27 |
qi-bot | [commit] acoul: generic: update 2.6.35 patches to 2.6.35-rc5 http://qi-hw.com/p/openwrt-xburst/5d1772a | 01:27 |
qi-bot | [commit] acoul: ixp4xx: update 2.6.35 patches to 2.6.35-rc5 http://qi-hw.com/p/openwrt-xburst/997b901 | 01:27 |
qi-bot | [commit] nbd: ep80579-drivers: the build system for this package is broken beyond repair. work around this by only using the kbuild make invocations and ignoring the other crap http://qi-hw.com/p/openwrt-xburst/79debaf | 01:27 |
qi-bot | [commit] acoul: package/kernel: update r22229 http://qi-hw.com/p/openwrt-xburst/4428e3a | 01:27 |
qi-bot | [commit] acoul: finalize r22241 fixes http://qi-hw.com/p/openwrt-xburst/7fe3810 | 01:27 |
qi-bot | [commit] hauke: kernel: the interface fsync changed a little http://qi-hw.com/p/openwrt-xburst/124bd99 | 01:27 |
qi-bot | [commit] hauke: kernel: fix kernel panic when traffic goes over the network. http://qi-hw.com/p/openwrt-xburst/c5e0e0a | 01:27 |
qi-bot | [commit] acoul: ixp4xx: fix lzma/jffs2 config options http://qi-hw.com/p/openwrt-xburst/d29bb5a | 01:27 |
qi-bot | [commit] acoul: ixp4xx: sync 2.6.33 patches against 2.6.33.6 http://qi-hw.com/p/openwrt-xburst/7a53271 | 01:27 |
qi-bot | [commit] acoul: ixp4xx: use default lzma kernel compression http://qi-hw.com/p/openwrt-xburst/3b233bb | 01:27 |
qi-bot | [commit] nico: dnsmasq: initscript: fix bool options handling, bump release number http://qi-hw.com/p/openwrt-xburst/6da348e | 01:27 |
qi-bot | [commit] hauke: kernel: refresh patches http://qi-hw.com/p/openwrt-xburst/e2e6a5b | 01:27 |
qi-bot | [commit] acoul: ixp4xx: update 2.6.35 config options http://qi-hw.com/p/openwrt-xburst/1d13ecc | 01:27 |
qi-bot | [commit] florian: [kernel] refresh 2.6.32 patches http://qi-hw.com/p/openwrt-xburst/7ed5276 | 01:27 |
qi-bot | [commit] florian: [rdc] refresh 2.6.32 patches http://qi-hw.com/p/openwrt-xburst/b123f2e | 01:27 |
qi-bot | [commit] florian: [rdc] fix bifferboard flash map, thanks bifferos (#7622) http://qi-hw.com/p/openwrt-xburst/35b2614 | 01:27 |
qi-bot | [commit] florian: [rdc] use bootloader baudrate settings, thanks bifferos (#7619) http://qi-hw.com/p/openwrt-xburst/1818c21 | 01:27 |
qi-bot | [commit] hauke: brcm47xx: activate swap again and run make oldconfig http://qi-hw.com/p/openwrt-xburst/8a674c3 | 01:27 |
qi-bot | [commit] florian: [brcm63xx] fix alice gate2 internet:green led (#6743) http://qi-hw.com/p/openwrt-xburst/741d3e3 | 01:27 |
qi-bot | [commit] florian: [rdc] remove 2.6.30 support http://qi-hw.com/p/openwrt-xburst/349bd35 | 01:27 |
qi-bot | [commit] florian: [adm5120] add support for generic eb214a, thanks cezary (#7027) http://qi-hw.com/p/openwrt-xburst/af139e0 | 01:27 |
qi-bot | [commit] cshore: [package] base-files & telnet: Fixed telnet starting even with root password when shadow passwords in use. http://qi-hw.com/p/openwrt-xburst/b1acaee | 01:27 |
qi-bot | [commit] jow: [package] base-files, busybox: fix 22279, simplify code and get rid of awk http://qi-hw.com/p/openwrt-xburst/825dbb3 | 01:27 |
qi-bot | [commit] acoul: package/kernel: modularize ixp4xx_eth driver & marvel 88E6060 phy support http://qi-hw.com/p/openwrt-xburst/c03ed13 | 01:27 |
qi-bot | [commit] acoul: ixp4xx: backport r21893 wrt300nv2 mac fix to 2.6.32 http://qi-hw.com/p/openwrt-xburst/3351cab | 01:27 |
qi-bot | [commit] hauke: iw: update to version 0.9.20 http://qi-hw.com/p/openwrt-xburst/b36eeab | 01:27 |
qi-bot | [commit] hauke: e2fsprogs: update to version 1.41.12 http://qi-hw.com/p/openwrt-xburst/53d6ece | 01:27 |
qi-bot | [commit] kaloz: remove unneeded patches http://qi-hw.com/p/openwrt-xburst/ac576eb | 01:27 |
qi-bot | [commit] kaloz: fixup some boardnames http://qi-hw.com/p/openwrt-xburst/03c684c | 01:27 |
qi-bot | [commit] kaloz: update kernel versions http://qi-hw.com/p/openwrt-xburst/4f9721d | 01:27 |
qi-bot | [commit] kaloz: we don't care about the md5sums for -rc kernels http://qi-hw.com/p/openwrt-xburst/2edc328 | 01:27 |
qi-bot | [commit] hcg: [gumstix] replace dropbear with openssh http://qi-hw.com/p/openwrt-xburst/63b003d | 01:27 |
qi-bot | [commit] hcg: [gumstix] Remove profile no longer required http://qi-hw.com/p/openwrt-xburst/c844d7d | 01:27 |
qi-bot | [commit] kaloz: rename the mx2 target to imx21 http://qi-hw.com/p/openwrt-xburst/6626848 | 01:27 |
qi-bot | [commit] hauke: brcm47xx: remove kernel 2.6.33 http://qi-hw.com/p/openwrt-xburst/03685da | 01:27 |
qi-bot | [commit] hauke: brcm47xx: prepare brcm47xx patches for sending to mainline. http://qi-hw.com/p/openwrt-xburst/9fe2a2d | 01:27 |
qi-bot | [commit] claudio: [kernel] pwm: export the generic pwm api as module http://qi-hw.com/p/openwrt-xburst/dba3373 | 01:27 |
qi-bot | [commit] hauke: brcm47xx: write boardflags correct into sprom http://qi-hw.com/p/openwrt-xburst/a7a1dcb | 01:27 |
qi-bot | [commit] jow: [package] nvram: handle nvram at varying offsets within the eraseblock (fixes Edimax PS-1208mfg with FLSH at offset 0) http://qi-hw.com/p/openwrt-xburst/98b06e8 | 01:27 |
qi-bot | [commit] nbd: mac80211: update to wireless-testing 2010-07-16 http://qi-hw.com/p/openwrt-xburst/6d574c2 | 01:27 |
qi-bot | [commit] nbd: mac80211: fix aggregation on WDS AP interfaces http://qi-hw.com/p/openwrt-xburst/d0f1d58 | 01:27 |
qi-bot | [commit] nbd: ar71xx: set default values for the fifo cfg registers on AR724x http://qi-hw.com/p/openwrt-xburst/e70bddd | 01:27 |
qi-bot | [commit] nbd: move the crda dependency to the kmod-cfg80211 package, get rid of crda's dependency on mac80211. this fixes circular dependency issues http://qi-hw.com/p/openwrt-xburst/0e2c7a5 | 01:27 |
qi-bot | [commit] nbd: kernel: add the new 'crashlog' feature, which tries to store kernel oops/panic logs in a fixed location in RAM to recover them after the reboot and make them available to user space using debugfs http://qi-hw.com/p/openwrt-xburst/5b42ce6 | 01:27 |
qi-bot | [commit] kaloz: the storm target is gone for a long time now http://qi-hw.com/p/openwrt-xburst/cd9b9a8 | 01:27 |
qi-bot | [commit] kaloz: upgrade the config.* scripts http://qi-hw.com/p/openwrt-xburst/e9b1c99 | 01:27 |
qi-bot | [commit] hauke: brcm47xx: fix for boardflags by xMff http://qi-hw.com/p/openwrt-xburst/0474d29 | 01:27 |
qi-bot | [commit] nbd: gcc: split up the build process into three distinct stages (minimal, initial, final), to clean up the dependency handling nastiness and to improve support for rebuilding parts of the toolchain http://qi-hw.com/p/openwrt-xburst/344914c | 01:27 |
qi-bot | [commit] florian: [package] remove whitespaces in kmod-switch sources http://qi-hw.com/p/openwrt-xburst/47cfa18 | 01:27 |
qi-bot | [commit] florian: [package] fix kmod-crypto-hw-padlock dependency against kmod-crypto-aes (#7643) http://qi-hw.com/p/openwrt-xburst/9b743eb | 01:27 |
qi-bot | [commit] kaloz: add support for the Gateworks Laguna family (Cavium Networks Econa CNS3xxx) http://qi-hw.com/p/openwrt-xburst/642064a | 01:27 |
qi-bot | [commit] nbd: kernel: add some missing debugging related config symbols http://qi-hw.com/p/openwrt-xburst/ec2064c | 01:27 |
qi-bot | [commit] nbd: add a config option for enabling kernel debugging symbols http://qi-hw.com/p/openwrt-xburst/12a6034 | 01:27 |
qi-bot | [commit] nbd: disable crash logging for uml, it cannot possibly work there anyway http://qi-hw.com/p/openwrt-xburst/b80f2ac | 01:27 |
qi-bot | [commit] nbd: add a build system option for collecting all kernel debug information (including modules) in a tarball http://qi-hw.com/p/openwrt-xburst/7b7e470 | 01:27 |
qi-bot | [commit] nbd: squashfs4: backport an upstream change to fix the file mode check to allow setuid/setgid binaries (thx, ermo) - fixes #7653 http://qi-hw.com/p/openwrt-xburst/f2f28c8 | 01:27 |
qi-bot | [commit] nbd: scripts/env: fix initialization of files/ when creating a new environment (patch from #7603) http://qi-hw.com/p/openwrt-xburst/361bd76 | 01:27 |
qi-bot | [commit] jow: [package] opkg: strip trailing whitespaces from entries in conffiles control files, fixes conffile md5 calculation against ipkg-build generated archives http://qi-hw.com/p/openwrt-xburst/47de166 | 01:27 |
qi-bot | [commit] jow: [package] opkg: fix host compilation on Darwin (libopkg_test failed to link) http://qi-hw.com/p/openwrt-xburst/2a8750a | 01:27 |
qi-bot | [commit] jow: [tools] mkimage: fix compilation on FreeBSD http://qi-hw.com/p/openwrt-xburst/ff696e3 | 01:27 |
qi-bot | [commit] jow: [tools] yaffs2: fix compilation on FreeBSD http://qi-hw.com/p/openwrt-xburst/674ab4a | 01:27 |
qi-bot | [commit] jow: [tools] squashfs4: fix compilation on FreeBSD http://qi-hw.com/p/openwrt-xburst/e645dfd | 01:27 |
qi-bot | [commit] jow: [package] busybox: fix compilation on FreeBSD http://qi-hw.com/p/openwrt-xburst/69c0983 | 01:27 |
qi-bot | [commit] claudio: Add package rotary-gpio-custom http://qi-hw.com/p/openwrt-xburst/b016e98 | 01:27 |
qi-bot | [commit] claudio: Add package pwm-gpio-custom http://qi-hw.com/p/openwrt-xburst/ffa085b | 01:27 |
qi-bot | [commit] claudio: [at91] Add support for u-boot http://qi-hw.com/p/openwrt-xburst/8d879e2 | 01:27 |
qi-bot | [commit] claudio: [at91] general cleanup http://qi-hw.com/p/openwrt-xburst/c849302 | 01:27 |
qi-bot | [commit] nbd: ar71xx: add support for the tp-link tl-wa901nd devices (patch by Pieter "Fate" Hollants, from #7528, without the ethernet fifo cfg values) http://qi-hw.com/p/openwrt-xburst/858ebac | 01:27 |
qi-bot | [commit] jow: [package] mac80211: fix handling of frag and rts options, thanks stintel! http://qi-hw.com/p/openwrt-xburst/ca8826c | 01:27 |
qi-bot | [commit] hauke: ubsec_ssb: fix build of ubsec_ssb with new ssb patches http://qi-hw.com/p/openwrt-xburst/89854bc | 01:27 |
qi-bot | [commit] hauke: mac80211: fix build of ipw2100 driver http://qi-hw.com/p/openwrt-xburst/d84fd0e | 01:27 |
qi-bot | [commit] nbd: load e1000 earlier to fix the order of the ethernet ports on Axiomtek NA-200 http://qi-hw.com/p/openwrt-xburst/b024d6e | 01:27 |
qi-bot | [commit] nbd: ath9k: fix another buffer leak in the aggregation code http://qi-hw.com/p/openwrt-xburst/cbab8bf | 01:27 |
qi-bot | [commit] nbd: ath9k: fix invalid noisefloor measurement values in ht20 mode http://qi-hw.com/p/openwrt-xburst/9dbbc94 | 01:27 |
qi-bot | [commit] nbd: ath9k: simplify noise floor calibration chainmask calculation http://qi-hw.com/p/openwrt-xburst/5d3c635 | 01:27 |
qi-bot | [commit] jow: [atheros] renaming of the IP175C switch driver brioke switch detection on the Dir-300 and others, fix it http://qi-hw.com/p/openwrt-xburst/8c71102 | 01:27 |
qi-bot | [commit] acoul: package/compcache: fix a dependency issue http://qi-hw.com/p/openwrt-xburst/f77190f | 01:27 |
qi-bot | [commit] jow: [package] uhttpd: http://qi-hw.com/p/openwrt-xburst/e417063 | 01:27 |
qi-bot | [commit] acoul: package/compcache: revert r22365 http://qi-hw.com/p/openwrt-xburst/3a2279a | 01:27 |
qi-bot | [commit] acoul: package/compcache: initialize swap driver and introduce a delay before mounting http://qi-hw.com/p/openwrt-xburst/c4c1131 | 01:27 |
qi-bot | [commit] nbd: ar71xx: fix sysupgrade on the ubnt nanostation m http://qi-hw.com/p/openwrt-xburst/e0673d1 | 01:27 |
qi-bot | [commit] jow: [buildsystem] use host opkg for installing packages in buildroot and ImageBuilder http://qi-hw.com/p/openwrt-xburst/ebd96b6 | 01:27 |
qi-bot | [commit] acoul: ixp4xx: add kernel 2.6.34 preliminary support http://qi-hw.com/p/openwrt-xburst/ad7b8d0 | 01:27 |
qi-bot | [commit] acoul: generic/config-2.6.32: switch from gzip to lzma jffs2 compression http://qi-hw.com/p/openwrt-xburst/3164199 | 01:27 |
qi-bot | [commit] jow: [package] base-files: unconditionally unlock the rootfs_data partition (#7437) http://qi-hw.com/p/openwrt-xburst/b8e09b9 | 01:27 |
qi-bot | [commit] acoul: package/base-files: add support for devtmpfs (thank you rauchwolke at gmx.net) http://qi-hw.com/p/openwrt-xburst/cb108e4 | 01:27 |
qi-bot | [commit] jow: [package] base-files: localize variable in do_move_devtmpfs(), remove extra temporary variable and shorten conditional http://qi-hw.com/p/openwrt-xburst/6a91be9 | 01:27 |
qi-bot | [commit] florian: [package] e2fsprogs: parallel build fix http://qi-hw.com/p/openwrt-xburst/cf8a125 | 01:27 |
qi-bot | [commit] florian: [package] linux-atm: parallel build fix http://qi-hw.com/p/openwrt-xburst/e06a066 | 01:27 |
qi-bot | [commit] hauke: brcm47xx: fill the whole sprom with data http://qi-hw.com/p/openwrt-xburst/507c163 | 01:27 |
qi-bot | [commit] jow: [brcm63xx] fix a typo in 040-bcm963xx_flashmap.patch http://qi-hw.com/p/openwrt-xburst/00dc5ed | 01:27 |
qi-bot | [commit] hauke: brcm47xx: add missing part from r22385 http://qi-hw.com/p/openwrt-xburst/1d687ec | 01:27 |
qi-bot | [commit] hauke: brcm47xx: now hopfully realy commit the right things from r22385 http://qi-hw.com/p/openwrt-xburst/d3a030c | 01:27 |
qi-bot | [commit] jow: [brcm63xx] reorder profiles http://qi-hw.com/p/openwrt-xburst/511da18 | 01:27 |
qi-bot | [commit] cshore: [package] dropbear: Add RootLogin parameter to control whether ssh logins as root are allowed. http://qi-hw.com/p/openwrt-xburst/2cba4ad | 01:27 |
qi-bot | [commit] cshore: [package] dropbear: Explicity list default RootPasswordAuth value in default config file so that users know to turn off RootPasswordAuth as well as PasswordAuth to prevent password logins as root. http://qi-hw.com/p/openwrt-xburst/dbf1301 | 01:27 |
qi-bot | [commit] markus: fix CRC32 calculation for sysupgrade http://qi-hw.com/p/openwrt-xburst/3c05ba2 | 01:27 |
qi-bot | [commit] acoul: tools/quilt: fix openSUSE/patch-2.6.1.81 issue (closes #7635) http://qi-hw.com/p/openwrt-xburst/f80d70e | 01:27 |
qi-bot | [commit] hauke: firmware-utils: The option -F was not detected. http://qi-hw.com/p/openwrt-xburst/9505c5d | 01:27 |
qi-bot | [commit] nbd: ar71xx: remove the fifo cfg overrides for the ap91 ethernet code - these values have been wrong on every single device i've tested, falling back to the atheros values seems to be the right thing to do http://qi-hw.com/p/openwrt-xburst/a0d848e | 01:27 |
qi-bot | [commit] nbd: kmod-ipsec: fix a compile error with some configurations. since CONFIG_XFRM_IPCOMP is not selectable on its own (no prompt), always select CONFIG_INET_IPCOMP along with it, to make sure that it gets enabled http://qi-hw.com/p/openwrt-xburst/bffb902 | 01:27 |
qi-bot | [commit] nbd: mac80211: update to wireless-testing 2010-07-26 + pending patches - adds a change that might fix some calibration issues http://qi-hw.com/p/openwrt-xburst/f7ff2ae | 01:27 |
qi-bot | [commit] jow: [package] uhttpd: fix build dependencies (#7674) http://qi-hw.com/p/openwrt-xburst/8d60ad1 | 01:27 |
qi-bot | [commit] jow: [buildsystem] make base-files dependent on opkg host compile, fixes install errors when package/compile and package/install are invoked separately http://qi-hw.com/p/openwrt-xburst/b31d05c | 01:27 |
qi-bot | [commit] jow: [buildsystem] revert r22372 and r22405, dependency on host libtool causes problems http://qi-hw.com/p/openwrt-xburst/55da36a | 01:27 |
qi-bot | [commit] acoul: generic/patches-2.6.34: Make devtmpfs available on (embedded) configurations without SHMEM/TMPFS, http://qi-hw.com/p/openwrt-xburst/2122c93 | 01:27 |
qi-bot | [commit] nbd: ath9k: fix various calibration related bugs and clean up the code http://qi-hw.com/p/openwrt-xburst/53e5fdd | 01:27 |
qi-bot | [commit] acoul: package/compcache: clean unneeded swap initialization http://qi-hw.com/p/openwrt-xburst/c07292d | 01:27 |
qi-bot | [commit] acoul: atheros/patches-2.6.35: sync patches against 2.6.35-rc6 http://qi-hw.com/p/openwrt-xburst/eb213ae | 01:27 |
qi-bot | [commit] acoul: [atheros] enable mtu & mac config options http://qi-hw.com/p/openwrt-xburst/9e3ec40 | 01:27 |
qi-bot | [commit] acoul: target/linux: refresh kernel patches http://qi-hw.com/p/openwrt-xburst/5d02e8b | 01:27 |
qi-bot | [commit] mb: firmware-utils/trx: Endianness fixes http://qi-hw.com/p/openwrt-xburst/1fa0de6 | 01:27 |
qi-bot | [commit] acoul: [atheros] add missing bits & bytes from r22412 http://qi-hw.com/p/openwrt-xburst/8f75cb6 | 01:27 |
qi-bot | [commit] nbd: mac80211: minor fix for the offchannel status change notification http://qi-hw.com/p/openwrt-xburst/f13045f | 01:27 |
qi-bot | [commit] hauke: mostly revert commit r22396 http://qi-hw.com/p/openwrt-xburst/8eb932c | 01:27 |
qi-bot | [commit] nbd: mac80211: update to 2010-07-29, add pending patches to fix further issues with calibration http://qi-hw.com/p/openwrt-xburst/b00a170 | 01:27 |
qi-bot | [commit] jow: [kernel] fix a typo in config-2.6.34 and config-2.6.35, thanks frogonwheels http://qi-hw.com/p/openwrt-xburst/5b072cd | 01:27 |
qi-bot | [commit] acoul: package/mac80211: sync commit r22419 http://qi-hw.com/p/openwrt-xburst/bb5ab3b | 01:27 |
qi-bot | [commit] acoul: generic/patches-2.6.32: finalize jffs2/lzma support on 2.6.32.x http://qi-hw.com/p/openwrt-xburst/ee0a258 | 01:27 |
qi-bot | [commit] hauke: brcm47xx: some fixes http://qi-hw.com/p/openwrt-xburst/48bf9cc | 01:27 |
qi-bot | [commit] hauke: brcm47xx: some checkpatch fixes http://qi-hw.com/p/openwrt-xburst/503bfaa | 01:27 |
qi-bot | [commit] florian: [ramips] fix jffs2 64k and 128k images overwrite each other http://qi-hw.com/p/openwrt-xburst/cc84d9a | 01:27 |
qi-bot | [commit] florian: [package] package libipq as a shared library http://qi-hw.com/p/openwrt-xburst/ff993cd | 01:27 |
qi-bot | [commit] florian: [toolchain] bump default gcc-4.4 version for sibyte and octeon http://qi-hw.com/p/openwrt-xburst/90bc098 | 01:27 |
qi-bot | [commit] florian: [package] remove iptables libipq dependency, thanks jow http://qi-hw.com/p/openwrt-xburst/cfbe1dd | 01:27 |
qi-bot | [commit] jow: [package] firewall: add basic NAT reflection/NAT loopback support http://qi-hw.com/p/openwrt-xburst/da83ad5 | 01:27 |
qi-bot | [commit] jow: [package] firwall: fix nat reflection for zones covering multiple networks http://qi-hw.com/p/openwrt-xburst/4fbc2d5 | 01:27 |
qi-bot | [commit] florian: [buildroot] fix for GREP_OPTIONS http://qi-hw.com/p/openwrt-xburst/805beb6 | 01:27 |
qi-bot | [commit] florian: [package] add txqueuelen option, patch from Roberto Riggio http://qi-hw.com/p/openwrt-xburst/f2ce924 | 01:27 |
qi-bot | [commit] florian: [toolchain] add support for gcc-4.5.1 http://qi-hw.com/p/openwrt-xburst/5653439 | 01:27 |
qi-bot | [commit] florian: [kernel] refresh 2.6.34 patches http://qi-hw.com/p/openwrt-xburst/23b5e58 | 01:27 |
qi-bot | [commit] florian: [octeon] add 2.6.34 support http://qi-hw.com/p/openwrt-xburst/b0a16a2 | 01:27 |
qi-bot | [commit] nico: fix typo http://qi-hw.com/p/openwrt-xburst/9db606b | 01:27 |
qi-bot | [commit] nbd: ath9k: fix aggregation pause/restart handling under heavy load (thx to Lorenzo Bianconi) http://qi-hw.com/p/openwrt-xburst/5215987 | 01:27 |
qi-bot | [commit] acoul: package/compcache: use mainline modules for kernels >=2.6.33 (thank you nbd) http://qi-hw.com/p/openwrt-xburst/5ef70c6 | 01:27 |
qi-bot | [commit] nbd: ath9k: improve stuck beacon recovery and noise floor handling. significantly improves stability under strong interference in ap mode http://qi-hw.com/p/openwrt-xburst/8132fc9 | 01:27 |
qi-bot | [commit] nbd: ath9k: improve stuck beacon recovery by reading nf values from the hw when a calibration is pending (instead of waiting for the next cal interval) http://qi-hw.com/p/openwrt-xburst/4b368f4 | 01:27 |
qi-bot | [commit] markus: LED handling fixes for WRT54-G3Gv2 http://qi-hw.com/p/openwrt-xburst/5aabd84 | 01:27 |
qi-bot | [commit] lars: [xburst] Add 2.6.35 patches http://qi-hw.com/p/openwrt-xburst/e0e5bd8 | 01:27 |
qi-bot | [commit] cshore: [brcm63xx] patches-2.6.32/33: Reset button on Comtrend routers is GPIO 33 not GPIO 32 http://qi-hw.com/p/openwrt-xburst/45357a4 | 01:27 |
qi-bot | [commit] cshore: [brcm63xx] base-files: brcm63xx.sh: Added comtrend (96348GW-11) to routers with buttons and leds on preinit http://qi-hw.com/p/openwrt-xburst/b1544d6 | 01:27 |
qi-bot | [commit] cshore: [brcm63xx]: base-files: diag.sh: For power button as preinit status led, end with led left on, not off http://qi-hw.com/p/openwrt-xburst/53a9db6 | 01:27 |
qi-bot | [commit] jow: [package] base-files: r22444 caused interfaces to remain down if the macaddr option is used, fix it. Also localize the txqueuelen option variable http://qi-hw.com/p/openwrt-xburst/8eea743 | 01:27 |
qi-bot | [commit] jow: ip17xx: r21709 broke VLAN functionality on the IP175C switch, add back mdelay() to wait before reading back the phy state, fixes ethernet on the DIR-300 and possibly others http://qi-hw.com/p/openwrt-xburst/fe9e702 | 01:27 |
qi-bot | [commit] lars: [toolchain] Add lost handling of -fhonour-copts to 4.4.x+cs/910-mbsd_multi.patch http://qi-hw.com/p/openwrt-xburst/9fa6262 | 01:27 |
qi-bot | [commit] hauke: brcm47xx: ignore some parts of flash on some netgear devices. This http://qi-hw.com/p/openwrt-xburst/fa5411e | 01:27 |
qi-bot | [commit] nbd: swconfig: cleanup of kernel drivers and interface http://qi-hw.com/p/openwrt-xburst/f093fbf | 01:27 |
qi-bot | [commit] hcg: omap35xx: Add temporary fix for marvell wlan MAC address detection http://qi-hw.com/p/openwrt-xburst/a30ce2b | 01:27 |
qi-bot | [commit] hcg: gumstix: Change defconfig http://qi-hw.com/p/openwrt-xburst/6f5afda | 01:27 |
qi-bot | [commit] lars: [xburst] Fix mmc card detection http://qi-hw.com/p/openwrt-xburst/952d7bf | 01:27 |
qi-bot | [commit] acoul: package/iptables: upgrade to iptables version 1.4.9 http://qi-hw.com/p/openwrt-xburst/28ca232 | 01:27 |
qi-bot | [commit] lars: [xburst] Adjust codec driver module name for 2.6.35 http://qi-hw.com/p/openwrt-xburst/84d0fac | 01:27 |
qi-bot | [commit] lars: [xburst] Set -march=mips32 http://qi-hw.com/p/openwrt-xburst/e9a6496 | 01:27 |
qi-bot | [commit] lars: [xburst] Drop 2.6.32 patches http://qi-hw.com/p/openwrt-xburst/caec700 | 01:27 |
qi-bot | [commit] jow: [PATCH] Allow UCI interface names in /etc/config/dhcp http://qi-hw.com/p/openwrt-xburst/8b5fd97 | 01:27 |
qi-bot | [commit] jow: [package] dnsmasq: add -c or --cache-size option to dnsmasq via cachesize UCI option (#7625) http://qi-hw.com/p/openwrt-xburst/07f6449 | 01:27 |
qi-bot | [commit] nbd: ath9k: fix rx tsf parsing http://qi-hw.com/p/openwrt-xburst/1eb6639 | 01:27 |
qi-bot | [commit] jow: [package] pppd: only remove own default route on shutdown (#7694) http://qi-hw.com/p/openwrt-xburst/da8fbc6 | 01:27 |
qi-bot | [commit] jow: [package] ppp: whitespace cleanup in previous commit http://qi-hw.com/p/openwrt-xburst/f785faa | 01:27 |
qi-bot | [commit] jow: [tools] sed: fix compilation on FreeBSD/AMD64 http://qi-hw.com/p/openwrt-xburst/44615aa | 01:27 |
qi-bot | [commit] jow: [package] ipset: fix ipset for kernel 2.6.35 http://qi-hw.com/p/openwrt-xburst/a4c4f9c | 01:27 |
qi-bot | [commit] jow: [package] kernel: package L2TP v3 ("Pseudowire") modules, restrict them to 2.6.35 http://qi-hw.com/p/openwrt-xburst/675a902 | 01:27 |
qi-bot | [commit] jow: [kernel] add missing symbols for 2.6.35 http://qi-hw.com/p/openwrt-xburst/aa26873 | 01:27 |
qi-bot | [commit] jow: [kernel] fix order fail in previous commit http://qi-hw.com/p/openwrt-xburst/b45d7f9 | 01:27 |
qi-bot | [commit] jow: [kernel] add missing symbols for 2.6.34, explicitely enable bootmem - required by crashlog (#7695) http://qi-hw.com/p/openwrt-xburst/f1989e5 | 01:27 |
qi-bot | [commit] jow: [kernel] explicitely enable bootmem on 2.6.35 - required by crashlog (#7695) http://qi-hw.com/p/openwrt-xburst/b83ee2b | 01:27 |
qi-bot | [commit] jow: [package] kernel: fix missing symbol introduced by l2tp http://qi-hw.com/p/openwrt-xburst/95c9084 | 01:27 |
qi-bot | [commit] hcg: base_files: Remove . from end of localhost entry http://qi-hw.com/p/openwrt-xburst/e3efdd6 | 01:27 |
qi-bot | [commit] hcg: gumstix: Update wifi default settings http://qi-hw.com/p/openwrt-xburst/47e7657 | 01:27 |
qi-bot | [commit] mirko: nptl-supoprt should not autoselect EXTRA_WARNINGS as this results in extra CFLAGS which may not be supported by older compilers (as e.g. gcc-4.1 which e.g. the x86 target is currently using) http://qi-hw.com/p/openwrt-xburst/040075b | 01:27 |
qi-bot | [commit] mirko: [kernel] Add missing symbols to 2.6.35 config http://qi-hw.com/p/openwrt-xburst/4fc4dac | 01:27 |
qi-bot | [commit] mirko: [xburst] Add missing symbol to 2.6.35 config http://qi-hw.com/p/openwrt-xburst/14cf3c5 | 01:27 |
qi-bot | [commit] acoul: package/compcache: revert r22458 as there are some issues with the mainline code http://qi-hw.com/p/openwrt-xburst/661d697 | 01:27 |
qi-bot | [commit] blogic: [ifxmips] http://qi-hw.com/p/openwrt-xburst/0b10449 | 01:27 |
qi-bot | [commit] hauke: brcm47xx: Add new image generation and fix leds/reset button on WNR834B V2 http://qi-hw.com/p/openwrt-xburst/8681f22 | 01:27 |
qi-bot | [commit] jow: [include] support unpacking of .tar.xz archives, no prereq on xzcat for now http://qi-hw.com/p/openwrt-xburst/13321eb | 01:27 |
qi-bot | [commit] lars: Add kernel_nconfig make target http://qi-hw.com/p/openwrt-xburst/04e9a33 | 01:27 |
qi-bot | [commit] jow: [package] iptables: refresh patch http://qi-hw.com/p/openwrt-xburst/a1fc7ca | 01:27 |
qi-bot | [commit] hauke: brcm47xx: fix warning introduced in r22516. http://qi-hw.com/p/openwrt-xburst/8439b23 | 01:27 |
qi-bot | [commit] hauke: brcm47xx: do not generate image for wgr614_v8 as long as we did not get any positive reports with that device. http://qi-hw.com/p/openwrt-xburst/6196853 | 01:27 |
qi-bot | [commit] lars: [xburst] qi_lb60: Fix keyboard gpio pins http://qi-hw.com/p/openwrt-xburst/0324ed8 | 01:27 |
qi-bot | [commit] acinonyx: [package] hostapd: Add support for 'iapp_interface' option, thanks stsp (#7719) http://qi-hw.com/p/openwrt-xburst/38a075f | 01:27 |
qi-bot | [commit] acinonyx: [package] dnsmasq: Squelch a 'touch' error when no dhcp leases file is defined in config, thanks stsp (#7720) http://qi-hw.com/p/openwrt-xburst/d9deabc | 01:27 |
qi-bot | [commit] mb: Add omap24xx. http://qi-hw.com/p/openwrt-xburst/8b8f4c7 | 01:27 |
qi-bot | [commit] mb: omap24xx: Support booting userland from MMC card http://qi-hw.com/p/openwrt-xburst/c6c7d90 | 01:27 |
qi-bot | [commit] mb: kexec is also available on armel http://qi-hw.com/p/openwrt-xburst/02e66a9 | 01:27 |
qi-bot | [commit] mb: omap24xx: Add working inittab and watchdog init script http://qi-hw.com/p/openwrt-xburst/20b373a | 01:27 |
qi-bot | [commit] mb: mac80211: Add p54spi driver http://qi-hw.com/p/openwrt-xburst/0daceb0 | 01:27 |
qi-bot | [commit] lars: [package] uci: Install ucimap.h into the staging dir http://qi-hw.com/p/openwrt-xburst/d1d21c8 | 01:27 |
qi-bot | [commit] florian: [kernel] add missing 2.6.35 config symbols http://qi-hw.com/p/openwrt-xburst/e4a7c9b | 01:27 |
qi-bot | [commit] florian: [kernel] add 2.6.35 md5sum http://qi-hw.com/p/openwrt-xburst/f7e08b5 | 01:27 |
qi-bot | [commit] florian: [kernel] add missing 2.6.35 config symbols http://qi-hw.com/p/openwrt-xburst/a62e0a8 | 01:27 |
qi-bot | [commit] florian: [kernel] refresh 2.6.35 patches http://qi-hw.com/p/openwrt-xburst/aa0dbef | 01:27 |
qi-bot | [commit] florian: [kernel] crashlog depends on BOOTMEM http://qi-hw.com/p/openwrt-xburst/daa8b37 | 01:27 |
qi-bot | [commit] florian: [kernel] refresh 2.6.34 patches http://qi-hw.com/p/openwrt-xburst/893b6de | 01:27 |
qi-bot | [commit] florian: [kernel] add missing 2.6.34 symbols http://qi-hw.com/p/openwrt-xburst/501cad2 | 01:27 |
qi-bot | [commit] florian: [package] rename kmod-switch-ip175c package to kmod-switch-ip17xx http://qi-hw.com/p/openwrt-xburst/cc25639 | 01:27 |
qi-bot | [commit] nbd: rtl8366: re-enable learning by default, disabling it broke switching functionality. http://qi-hw.com/p/openwrt-xburst/1fc3901 | 01:27 |
qi-bot | [commit] agb: [tools] qemu: build qemu-img for packaging vmdk and vdi images http://qi-hw.com/p/openwrt-xburst/524f840 | 01:27 |
qi-bot | [commit] agb: [x86] image: use internal qemu-img for vmdk and vdi images http://qi-hw.com/p/openwrt-xburst/5ae3757 | 01:27 |
qi-bot | [commit] kaloz: [cns3xxx]: workaround serial hang with SMP enabled http://qi-hw.com/p/openwrt-xburst/6544569 | 01:27 |
qi-bot | [commit] mb: kexec-tools: Update to 2.0.2. http://qi-hw.com/p/openwrt-xburst/26aef4c | 01:27 |
qi-bot | [commit] jow: [generic] fix localversion detection for linux 2.6.35 http://qi-hw.com/p/openwrt-xburst/2d8264c | 01:27 |
qi-bot | [commit] nico: package/comgt: only set pincode if it's supplied (closes: #7334), bump release number http://qi-hw.com/p/openwrt-xburst/2497113 | 01:27 |
qi-bot | [commit] mb: omap24xx: Fix MMC multiplexer http://qi-hw.com/p/openwrt-xburst/7042250 | 01:27 |
qi-bot | [commit] mb: omap24xx: Update kernel config. This also fixes module loading. http://qi-hw.com/p/openwrt-xburst/c3dc10c | 01:27 |
qi-bot | [commit] florian: [au1000] add support for 2.6.35 http://qi-hw.com/p/openwrt-xburst/1830160 | 01:27 |
qi-bot | [commit] hcg: Remove shells from unavalable serial ports http://qi-hw.com/p/openwrt-xburst/26ed86a | 01:27 |
qi-bot | [commit] hcg: [gumstix] Remove sqlite from default config http://qi-hw.com/p/openwrt-xburst/23a7f03 | 01:27 |
qi-bot | [commit] hcg: [gumstix] enable gpio uesrspace interface via sysfs http://qi-hw.com/p/openwrt-xburst/5435a05 | 01:27 |
qi-bot | [commit] hcg: [kmod-bluetooth] Add HCI_UART_H4 support (required by Gumstix Overo) http://qi-hw.com/p/openwrt-xburst/1c1a3a7 | 01:27 |
qi-bot | [commit] hcg: [gumstix] Add stty to default config (required for gumstix bluetooth setup) http://qi-hw.com/p/openwrt-xburst/6f6d449 | 01:27 |
qi-bot | [commit] hcg: [gumstix] Switch of echo on ttyS1 (required for bluetooth to function correctly) http://qi-hw.com/p/openwrt-xburst/b2932eb | 01:27 |
qi-bot | [commit] lars: [kernel] Fix gpio_spi_old module for 2.6.35 http://qi-hw.com/p/openwrt-xburst/24f720d | 01:27 |
qi-bot | [commit] mb: Fix dl_cleanup.py http://qi-hw.com/p/openwrt-xburst/672b7ef | 01:27 |
qi-bot | [commit] florian: [tools] update wrt350nv2 builder to v2.3 (#7580) http://qi-hw.com/p/openwrt-xburst/2513849 | 01:27 |
qi-bot | [commit] florian: [orion] fix jffs2 128k image generation, patch from madddes (#7584) http://qi-hw.com/p/openwrt-xburst/5fc3e14 | 01:27 |
qi-bot | [commit] nico: package/iptables: update to 1.4.9.1 and cleanup: http://qi-hw.com/p/openwrt-xburst/0586ca8 | 01:27 |
qi-bot | [commit] florian: [orion] fix Freecom DT2 jffs2 rootfs generation issue (#7584) http://qi-hw.com/p/openwrt-xburst/486bf48 | 01:27 |
qi-bot | [commit] florian: [kernel] rename 014-samsung_flash patch to a better name, thanks maddes http://qi-hw.com/p/openwrt-xburst/9f39c01 | 01:27 |
qi-bot | [commit] jow: [package] uhttpd: add option to reject requests from RFC1918 IPs to public server IPs (DNS rebinding countermeasure) http://qi-hw.com/p/openwrt-xburst/fd370b6 | 01:27 |
qi-bot | [commit] acoul: package/mac80211: let build system enable led code through cflags (thank you nbd) http://qi-hw.com/p/openwrt-xburst/7425e48 | 01:27 |
qi-bot | [commit] nico: package/dnsmasq: add support for bogus-nxdomain (thanks to Mickey Knox), bump release number http://qi-hw.com/p/openwrt-xburst/b66f4d4 | 01:27 |
qi-bot | [commit] jow: [package] uhttpd: make init script less verbose http://qi-hw.com/p/openwrt-xburst/89c5fd5 | 01:27 |
qi-bot | [commit] nico: package/kernel: video: remove redundant AddDepends/video calls http://qi-hw.com/p/openwrt-xburst/48ed30f | 01:27 |
qi-bot | [commit] nico: package/kernel: video: add missing dependencies (closes: #6497, #7542) http://qi-hw.com/p/openwrt-xburst/8715e7d | 01:27 |
qi-bot | [commit] jow: [package] uhttpd: http://qi-hw.com/p/openwrt-xburst/01658f6 | 01:27 |
qi-bot | [commit] jow: [package] 6in4: fix local address detection on ppp links (#7728) http://qi-hw.com/p/openwrt-xburst/e7b3af1 | 01:27 |
qi-bot | [commit] jow: [package] uhttpd: fix segmentation fault triggered by invalid header line http://qi-hw.com/p/openwrt-xburst/a6757e4 | 01:27 |
qi-bot | [commit] acoul: package/mac80211: fix r22422, add missing bits & bytes http://qi-hw.com/p/openwrt-xburst/b034f62 | 01:27 |
qi-bot | [commit] lars: Add lxde feed to feeds.conf.default http://qi-hw.com/p/openwrt-xburst/b12ee20 | 01:27 |
qi-bot | [commit] jow: [kernel] ssb: give the PCI core more time to initialize, fixes PCI issues with Atheros cards on the Asus WL-500w and possibly others (#4710) http://qi-hw.com/p/openwrt-xburst/79af254 | 01:27 |
qi-bot | [commit] jow: [kernel] fixup 2.6.34 kernel headers to properly export XT_ALIGN() to userspace http://qi-hw.com/p/openwrt-xburst/547bbf9 | 01:27 |
qi-bot | [commit] mb: n810: Make sysfs backlight controls work http://qi-hw.com/p/openwrt-xburst/503f946 | 01:27 |
qi-bot | [commit] jow: [ar71xx] add uci-defaults script to migrate vlan 0 to vlan 1 after sysupgrade on devices using the RTL8366s switch http://qi-hw.com/p/openwrt-xburst/698224c | 01:27 |
qi-bot | [commit] jow: [package] base-files, uci: properly revert list state on config_load http://qi-hw.com/p/openwrt-xburst/e3198ce | 01:27 |
qi-bot | [commit] jow: [package] uhttpd: http://qi-hw.com/p/openwrt-xburst/2540dbb | 01:27 |
qi-bot | [commit] acoul: linux/ar71xx: add nanostation-m signature (thanks Antonio Anselmi) http://qi-hw.com/p/openwrt-xburst/9131e95 | 01:27 |
qi-bot | [commit] nico: package/kernel: enable raw HID device support in kmod-usb-hid (closes: #7310) http://qi-hw.com/p/openwrt-xburst/0f81e41 | 01:27 |
qi-bot | [commit] juhosg: generic: fix kernel version check for 2.6.35 http://qi-hw.com/p/openwrt-xburst/1aaea72 | 01:27 |
qi-bot | [commit] juhosg: generic: fix wrong number of erase sectors for xxxS33B SPI flashes http://qi-hw.com/p/openwrt-xburst/43aca5a | 01:27 |
qi-bot | [commit] juhosg: ar71xx: add eap7660d board to diag.sh and sysupgrade http://qi-hw.com/p/openwrt-xburst/4ebeeb5 | 01:27 |
qi-bot | [commit] juhosg: ixp4xx: include linux/slab.h in the latch LED driver http://qi-hw.com/p/openwrt-xburst/96de0c8 | 01:27 |
qi-bot | [commit] juhosg: ixp4xx: sync 2.6.32 kernel config http://qi-hw.com/p/openwrt-xburst/abeeac0 | 01:27 |
qi-bot | [commit] juhosg: ixp4xx: backport IXP4XX_GPIO_IRQ macro to 2.6.32 http://qi-hw.com/p/openwrt-xburst/5515601 | 01:27 |
qi-bot | [commit] juhosg: ixp4xx: add TW-266-2 support to 2.6.32 as well http://qi-hw.com/p/openwrt-xburst/0eb7476 | 01:27 |
qi-bot | [commit] juhosg: ixp4xx: refresh patches http://qi-hw.com/p/openwrt-xburst/b917bcd | 01:27 |
qi-bot | [commit] juhosg: ixp4xx: fix GPIOLIB support http://qi-hw.com/p/openwrt-xburst/9bdf47a | 01:27 |
qi-bot | [commit] juhosg: ixp4xx: use the right parameter for ixp4xx_phy_disconnect http://qi-hw.com/p/openwrt-xburst/55d80cb | 01:27 |
qi-bot | [commit] agb: [tools] quilt: needs autoconf http://qi-hw.com/p/openwrt-xburst/63c1b92 | 01:27 |
qi-bot | [commit] juhosg: ixp4xx: fix compiler warnings in tw5334-setup.c http://qi-hw.com/p/openwrt-xburst/7ebc0df | 01:27 |
qi-bot | [commit] juhosg: ixp4xx: fix compiler warnings in wrt300nv2-setup.c http://qi-hw.com/p/openwrt-xburst/c55e5c2 | 01:27 |
qi-bot | [commit] juhosg: generic: fix LED control on the RTL8366 switches http://qi-hw.com/p/openwrt-xburst/fbab069 | 01:27 |
qi-bot | [commit] juhosg: ramips: add support for Sparklan WCR-150GN board http://qi-hw.com/p/openwrt-xburst/ef0f04c | 01:27 |
qi-bot | [commit] acoul: package/busybox: update to busybox-1.7.1, include upstream patches http://qi-hw.com/p/openwrt-xburst/59736eb | 01:27 |
qi-bot | [commit] acoul: package/busybox: fix missing bit, refresh patches http://qi-hw.com/p/openwrt-xburst/cbcb84e | 01:27 |
qi-bot | [commit] acoul: brcm47xx/patches-2.6.35: Allow SSB EHCI/OHCI drivers to co-exist (thank you Steve Brown) http://qi-hw.com/p/openwrt-xburst/4913e9e | 01:27 |
qi-bot | [commit] juhosg: generic: update ARM mach-types http://qi-hw.com/p/openwrt-xburst/10f7c6b | 01:27 |
qi-bot | [commit] hauke: brcm47xx: do not read out cfe http://qi-hw.com/p/openwrt-xburst/1014b0e | 01:27 |
qi-bot | [commit] nico: package/busybox: add missing bits from 1.17.1 update (mostly config stuff), rename upstream patches so they're applied first http://qi-hw.com/p/openwrt-xburst/5287284 | 01:27 |
qi-bot | [commit] acoul: package/busybox: fix macosx cross compile, closes #7775 http://qi-hw.com/p/openwrt-xburst/bef3daa | 01:27 |
qi-bot | [commit] nico: package/grub: add a prereq check for 32 bits host development files when building on x86_64 (closes: #7753) http://qi-hw.com/p/openwrt-xburst/2a449c9 | 01:27 |
qi-bot | [commit] lars: Add build variants support to InstallDev http://qi-hw.com/p/openwrt-xburst/4c8a665 | 01:27 |
qi-bot | [commit] lars: [package] ncurses: Add libncursesw package http://qi-hw.com/p/openwrt-xburst/81a8da5 | 01:27 |
qi-bot | [commit] florian: [package]: update acx-mac80211 and change the git url. http://qi-hw.com/p/openwrt-xburst/570aca0 | 01:27 |
qi-bot | [commit] florian: [kernel] add missing symbol: CONFIG_UCB1400_CORE to 2.6.35 config http://qi-hw.com/p/openwrt-xburst/475f0ce | 01:27 |
qi-bot | [commit] nbd: ar71xx: add a new driver for the ar7240 switch using swconfig. http://qi-hw.com/p/openwrt-xburst/5cc1f4b | 01:27 |
qi-bot | [commit] florian: [ifxmips] refresh 310-cfi0002-swap.patch http://qi-hw.com/p/openwrt-xburst/aa4c97c | 01:27 |
qi-bot | [commit] florian: [kernel] add missing config options from #7733, thanks maddes http://qi-hw.com/p/openwrt-xburst/5e8e10a | 01:27 |
qi-bot | [commit] jow: [package] iptables: partly revert r22582, fixes ip6tables extension packaging http://qi-hw.com/p/openwrt-xburst/c65f903 | 01:27 |
qi-bot | [commit] nbd: ath9k: remove an unnecessary BUG_ON in the aggregation code and clean up block ack window tracking to use less memory http://qi-hw.com/p/openwrt-xburst/94f6a65 | 01:27 |
qi-bot | [commit] florian: [rdc] allow 1MB extra space for JFFS and other enhancements (#7706) http://qi-hw.com/p/openwrt-xburst/12671e1 | 01:27 |
qi-bot | [commit] jow: [package] uhttpd: http://qi-hw.com/p/openwrt-xburst/8618e98 | 01:27 |
qi-bot | [commit] nico: toolchain/gcc: remove remaining references to gcc-3.4.6 http://qi-hw.com/p/openwrt-xburst/7a57b60 | 01:27 |
qi-bot | [commit] mb: Support parallel build of certain packages http://qi-hw.com/p/openwrt-xburst/c7ee63d | 01:27 |
qi-bot | [commit] mb: Also support parallel build for host-packages http://qi-hw.com/p/openwrt-xburst/a1a475c | 01:27 |
qi-bot | [commit] juhosg: ar71xx: change mac address initialization http://qi-hw.com/p/openwrt-xburst/a393655 | 01:27 |
qi-bot | [commit] juhosg: ar71xx: don't override CONFIG_SWAP http://qi-hw.com/p/openwrt-xburst/59741b2 | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: add enable_vlan{,4k} to smi_ops http://qi-hw.com/p/openwrt-xburst/3b7b50f | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: add generic code to enable VLANs http://qi-hw.com/p/openwrt-xburst/356b45c | 01:27 |
qi-bot | [commit] juhosg: generic: rtl8366: allow use of VIDs 16-4095 if vlan4k is enabled http://qi-hw.com/p/openwrt-xburst/0c4c78b | 01:27 |
qi-bot | [commit] jow: [package] 6in4: bypass uci state when reading local IPv4 addr, specify TTL during tunnel creation (#7769) http://qi-hw.com/p/openwrt-xburst/28ddaa0 | 01:27 |
qi-bot | [commit] jow: [package] 6in4: fix typo in last commit http://qi-hw.com/p/openwrt-xburst/fb8dd8b | 01:27 |
qi-bot | [commit] mb: Add Tahvo USB support http://qi-hw.com/p/openwrt-xburst/29b3784 | 01:27 |
qi-bot | [commit] nbd: kernel: add a missing config symbol for ext4 http://qi-hw.com/p/openwrt-xburst/3b17663 | 01:27 |
qi-bot | [commit] nbd: kernel: backport ssb dma_dev changes to fix b43 build http://qi-hw.com/p/openwrt-xburst/e3fc173 | 01:27 |
qi-bot | [commit] nbd: kernel: backport ppoll to 2.6.31 to fix udev build http://qi-hw.com/p/openwrt-xburst/715bc92 | 01:27 |
qi-bot | [commit] nbd: speed up the build system by including include/shell.sh on shell commands only where necessary http://qi-hw.com/p/openwrt-xburst/37b9bb7 | 01:27 |
qi-bot | [commit] nbd: pwm-gpio-custom: fix compile on linux 2.6.31 http://qi-hw.com/p/openwrt-xburst/1baaeb8 | 01:27 |
qi-bot | [commit] nbd: speed up the ipkg build process some more by reordering commands http://qi-hw.com/p/openwrt-xburst/9766ebb | 01:27 |
qi-bot | [commit] nbd: toolchain: fix the sysroot mess by getting rid of $(TOOLCHAIN_DIR)/usr and moving it back to $(TOOLCHAIN_DIR), this change makes the toolchain relocatable again, which should fix the SDK http://qi-hw.com/p/openwrt-xburst/dc74adf | 01:27 |
qi-bot | [commit] nbd: kernel: speed up building kernel packages by getting rid of unnecessary CompareKernelPatchVer calls http://qi-hw.com/p/openwrt-xburst/67dac5c | 01:27 |
qi-bot | [commit] nbd: fix compile errors by forcing bash to be used as a shell in all submake processes http://qi-hw.com/p/openwrt-xburst/d6520c7 | 01:27 |
qi-bot | [commit] florian: [ar7] remove fixed phy support, enable most ar7 switch drivers. http://qi-hw.com/p/openwrt-xburst/9b3461e | 01:27 |
qi-bot | [commit] florian: [ar7] add swconfig to the default set of packages http://qi-hw.com/p/openwrt-xburst/a08da95 | 01:27 |
qi-bot | [commit] nbd: fix libtool fixup for libstdc++ http://qi-hw.com/p/openwrt-xburst/ea03f04 | 01:27 |
qi-bot | [commit] claudio: [at91] Include the usb-ohci module as default http://qi-hw.com/p/openwrt-xburst/a90c827 | 01:27 |
qi-bot | [commit] mb: Add an option to default the default build rule to parallel build. http://qi-hw.com/p/openwrt-xburst/9d3a35f | 01:27 |
qi-bot | [commit] mb: n810: Add retu/tahvo userspace interface debugging http://qi-hw.com/p/openwrt-xburst/7397e82 | 01:27 |
qi-bot | [commit] lars: [ifxmips] Danube: Fix irq ack http://qi-hw.com/p/openwrt-xburst/3c77df7 | 01:27 |
qi-bot | [commit] mb: mac80211: Fix incorrect ifdef placement in 800-nuke_led_code.patch http://qi-hw.com/p/openwrt-xburst/87adbb0 | 01:27 |
qi-bot | [commit] agb: [tools] qemu: fix build failure on some systems. Closes #7767 http://qi-hw.com/p/openwrt-xburst/6bb84a0 | 01:27 |
qi-bot | [commit] mb: Update to 2.6.35.3 http://qi-hw.com/p/openwrt-xburst/c86adc9 | 01:27 |
qi-bot | [commit] agb: [tools] qemu: add dependency on libuuid http://qi-hw.com/p/openwrt-xburst/1b1535d | 01:27 |
qi-bot | [commit] hauke: kernel: update kernel version to 2.6.34.5 http://qi-hw.com/p/openwrt-xburst/eac32f6 | 01:27 |
qi-bot | [commit] mb: n810: Add basic battery management driver http://qi-hw.com/p/openwrt-xburst/66c9183 | 01:27 |
qi-bot | [commit] lars: [package] Add uboot for marvell kirkwood based boards http://qi-hw.com/p/openwrt-xburst/180624e | 01:27 |
qi-bot | [commit] lars: [kirkwood] Add Seagate Dockstar support http://qi-hw.com/p/openwrt-xburst/9fa1198 | 01:27 |
qi-bot | [commit] florian: [kernel] update to 2.6.32.20 http://qi-hw.com/p/openwrt-xburst/66eeee5 | 01:27 |
qi-bot | [commit] florian: [kernel] update to 2.6.33.7 http://qi-hw.com/p/openwrt-xburst/fa7498e | 01:27 |
qi-bot | [commit] florian: [kernel] update to 2.6.34.5 http://qi-hw.com/p/openwrt-xburst/56572f7 | 01:27 |
qi-bot | [commit] florian: [ar7] refresh patches http://qi-hw.com/p/openwrt-xburst/72015e7 | 01:27 |
qi-bot | [commit] florian: [ar7] cleanup the cpmac phy mask, patch from Ben Witten http://qi-hw.com/p/openwrt-xburst/5a48572 | 01:27 |
qi-bot | [commit] florian: [ar7] make adm6996 switches work on tnetd7200 and tnetd7300 http://qi-hw.com/p/openwrt-xburst/78945f2 | 01:27 |
qi-bot | [commit] florian: [kernel] refresh 2.6.35 patches http://qi-hw.com/p/openwrt-xburst/91684ec | 01:27 |
qi-bot | [commit] florian: [au1000] refresh 2.6.35 patches http://qi-hw.com/p/openwrt-xburst/e8cc031 | 01:27 |
qi-bot | [commit] hauke: kernel: fix some mistakes in ssb patch refresh in r22766, r22767 and r22768. http://qi-hw.com/p/openwrt-xburst/dede4b7 | 01:27 |
qi-bot | [commit] lars: [xburst] Fix n5x6 sound drivers http://qi-hw.com/p/openwrt-xburst/0e4e5ab | 01:27 |
qi-bot | [commit] lars: [xburst] refresh config http://qi-hw.com/p/openwrt-xburst/535fd51 | 01:27 |
qi-bot | [commit] mb: tahvo-usb: Use platform device interface properly (don't crash) http://qi-hw.com/p/openwrt-xburst/8f42ed3 | 01:27 |
qi-bot | [commit] mb: n810: Fix USB board init http://qi-hw.com/p/openwrt-xburst/474e422 | 01:27 |
qi-bot | [commit] mb: Add usb gadget packages http://qi-hw.com/p/openwrt-xburst/26442af | 01:27 |
qi-bot | [commit] lars: [kirkwood] Update kernel to 2.6.35 http://qi-hw.com/p/openwrt-xburst/26d1611 | 01:27 |
qi-bot | [commit] lars: [kernel] Add missing symbols to 2.6.35 config http://qi-hw.com/p/openwrt-xburst/3e13028 | 01:27 |
qi-bot | [commit] florian: [malta] update qemu README wrt latest qemu http://qi-hw.com/p/openwrt-xburst/e2e469f | 01:27 |
qi-bot | [commit] florian: [malta] update to 2.6.35.3 http://qi-hw.com/p/openwrt-xburst/25d98b3 | 01:27 |
qi-bot | [commit] nbd: ath9k: fix spurious MIC failure detection, causing instability issues in AP mode http://qi-hw.com/p/openwrt-xburst/bfbae0b | 01:27 |
qi-bot | [commit] mb: p54: Fix powersave mode http://qi-hw.com/p/openwrt-xburst/f838007 | 01:27 |
qi-bot | [commit] mb: Add usb gadget feature flag http://qi-hw.com/p/openwrt-xburst/a86afac | 01:27 |
qi-bot | [commit] florian: [kernel] refresh 2.6.35 patches http://qi-hw.com/p/openwrt-xburst/5bf465d | 01:27 |
qi-bot | [commit] florian: [brcm63xx] add 2.6.35 support http://qi-hw.com/p/openwrt-xburst/e212aad | 01:27 |
qi-bot | [commit] florian: [cobalt] rename config-2.6.32 to config-default http://qi-hw.com/p/openwrt-xburst/d03abe0 | 01:27 |
qi-bot | [commit] florian: [cobalt] add support for 2.6.35 http://qi-hw.com/p/openwrt-xburst/8c95b46 | 01:27 |
qi-bot | [commit] juhosg: ar71xx: refresh patches http://qi-hw.com/p/openwrt-xburst/155c111 | 01:27 |
qi-bot | [commit] juhosg: generic: fix pm25lv SPI flash support http://qi-hw.com/p/openwrt-xburst/0f33c50 | 01:27 |
qi-bot | [commit] jow: [package] uhttpd: fix segfault triggered by Basic Auth checking http://qi-hw.com/p/openwrt-xburst/93019f8 | 01:27 |
qi-bot | [commit] jow: [package] ppp: populate gateway of default route with peer address (#6259) http://qi-hw.com/p/openwrt-xburst/ede4197 | 01:27 |
qi-bot | [commit] florian: [ar7] add compile fixes for ar7-atm http://qi-hw.com/p/openwrt-xburst/93eeadb | 01:27 |
qi-bot | [commit] florian: [ar7] add 2.6.35 support http://qi-hw.com/p/openwrt-xburst/4377f9b | 01:27 |
qi-bot | [commit] hcg: Update kernel to 2.6.34.5, add USB storage to profile http://qi-hw.com/p/openwrt-xburst/f344691 | 01:27 |
qi-bot | [commit] nbd: scripts/feeds: cache feed metadata instead of re-reading it on every get_feed() call http://qi-hw.com/p/openwrt-xburst/5e82366 | 01:27 |
qi-bot | [commit] nbd: scripts/feeds: switch to the right feed metadata when installing a package to fix dependency handling (patch by matthijs from #5891) http://qi-hw.com/p/openwrt-xburst/30d6c70 | 01:27 |
qi-bot | [commit] mb: Improve n810 profile http://qi-hw.com/p/openwrt-xburst/e13cab4 | 01:27 |
qi-bot | [commit] nbd: scripts/feeds: fix a bug in the metadata caching change http://qi-hw.com/p/openwrt-xburst/482da31 | 01:27 |
qi-bot | [commit] agb: [gemini] update wbd222 patch after r22662 http://qi-hw.com/p/openwrt-xburst/0451722 | 01:27 |
qi-bot | [commit] jow: [package] libreadline: install *.so symlinks as well (#4872) http://qi-hw.com/p/openwrt-xburst/9ea9f41 | 01:27 |
qi-bot | [commit] nbd: ath9k: add some extra checks to the mic failure fix http://qi-hw.com/p/openwrt-xburst/6dd2907 | 01:27 |
qi-bot | [commit] nbd: ath9k: fix a WARN_ON when aggregation start is issued more than once, should improve stability with 802.11n http://qi-hw.com/p/openwrt-xburst/6361f69 | 01:27 |
qi-bot | [commit] lars: [kirkwood] Cleanup image generation http://qi-hw.com/p/openwrt-xburst/b0edeb4 | 01:27 |
qi-bot | [commit] acoul: linux/generic: add kernel 2.6.36 preliminary support http://qi-hw.com/p/openwrt-xburst/e60c032 | 01:27 |
qi-bot | [commit] lars: [kernel] Update 2.6.35.x to 2.6.35.4 http://qi-hw.com/p/openwrt-xburst/0c97393 | 01:27 |
qi-bot | [commit] acoul: linux/generic: update 2.6.36 kernel patches http://qi-hw.com/p/openwrt-xburst/b27a178 | 01:27 |
qi-bot | [commit] acoul: package/madwifi: enable mtu & mac config options for > 2.6.29 kernels http://qi-hw.com/p/openwrt-xburst/b2948ef | 01:27 |
qi-bot | [commit] lars: [kirkwood] Align jffs2 to pagesize and fix mkfs2.jffs2 opts http://qi-hw.com/p/openwrt-xburst/fd9a760 | 01:27 |
qi-bot | [commit] lars: [kirkwood] Use kirkwood_nand_init instead of manually registering the nand driver http://qi-hw.com/p/openwrt-xburst/02a00e2 | 01:27 |
qi-bot | [commit] lars: [kirkwood] Add different profiles for Sheevaplug and Dockstar http://qi-hw.com/p/openwrt-xburst/2d624f2 | 01:27 |
qi-bot | [commit] lars: [uboot-kirkwood] Dockstar: Adjust rootfs size to that of the original fw http://qi-hw.com/p/openwrt-xburst/683db7a | 01:27 |
qi-bot | [commit] florian: [toolchain] gcj can only be built safely on gcc >= 4.3 http://qi-hw.com/p/openwrt-xburst/cf5ce25 | 01:27 |
qi-bot | [commit] acoul: linux/generic: update 2.6.36 kernel patches http://qi-hw.com/p/openwrt-xburst/2e6f3ef | 01:27 |
qi-bot | [commit] lars: [kirkwood] Build usb storage support into the kernel. http://qi-hw.com/p/openwrt-xburst/9104338 | 01:27 |
qi-bot | [commit] jow: [linux] enable SYSRQ for all targets, remove overrides from brcm63xx, octeon and omap35xx http://qi-hw.com/p/openwrt-xburst/366f063 | 01:27 |
qi-bot | [commit] jow: [package] firewall: http://qi-hw.com/p/openwrt-xburst/94c817e | 01:27 |
qi-bot | [commit] florian: [kernel] refresh 2.6.32 patches http://qi-hw.com/p/openwrt-xburst/680c4d4 | 01:27 |
qi-bot | [commit] florian: [ar7] refresh patches http://qi-hw.com/p/openwrt-xburst/1aeafdb | 01:27 |
qi-bot | [commit] florian: [ar7] rework multi_probe patch to be cleaner http://qi-hw.com/p/openwrt-xburst/c275201 | 01:27 |
qi-bot | [commit] florian: [rdc] refresh 2.6.32 patches http://qi-hw.com/p/openwrt-xburst/2ac9a1a | 01:27 |
qi-bot | [commit] florian: [rdc] backport upstream multicast fix (#7848) http://qi-hw.com/p/openwrt-xburst/decdb04 | 01:27 |
qi-bot | [commit] nbd: hostapd: backport a fix to check for STA STBC capabilities before setting them (fixes #7464) http://qi-hw.com/p/openwrt-xburst/3fe81b1 | 01:27 |
qi-bot | [commit] nbd: rtl8366_smi: when setting VLAN ports, always initialize the PVID to ensure that the VLAN MC entry gets allocated. Fixes problems with tagged-only ports (#7795) http://qi-hw.com/p/openwrt-xburst/a9266bc | 01:27 |
qi-bot | [commit] juhosg: generic: introduce broadcast_uevent function http://qi-hw.com/p/openwrt-xburst/c78a804 | 01:27 |
qi-bot | [commit] juhosg: package/button-hotplug: use brodcast_uevent http://qi-hw.com/p/openwrt-xburst/3d764d5 | 01:27 |
qi-bot | [commit] juhosg: package/broadcom-diag: use broadcast_uevent http://qi-hw.com/p/openwrt-xburst/4149596 | 01:27 |
qi-bot | [commit] juhosg: generic: fix erase operation on the pm25lv flash chip http://qi-hw.com/p/openwrt-xburst/2bbe78f | 01:27 |
qi-bot | [commit] juhosg: generic: bacport SPI bus locking API http://qi-hw.com/p/openwrt-xburst/c433567 | 01:27 |
qi-bot | [commit] juhosg: ar71xx: rewrite SPI drivers for the RB4xx boards http://qi-hw.com/p/openwrt-xburst/d1f3338 | 01:27 |
qi-bot | [commit] juhosg: ar71xx: refresh patches http://qi-hw.com/p/openwrt-xburst/0e41d92 | 01:27 |
qi-bot | [commit] nbd: mac80211: update to wireless-testing 2010-08-31 http://qi-hw.com/p/openwrt-xburst/2cedae1 | 01:27 |
qi-bot | [commit] nbd: mac80211: replace 800-nuke_led_code.patch with something smaller. http://qi-hw.com/p/openwrt-xburst/7fb8177 | 01:27 |
qi-bot | [commit] acoul: generic: move iptables/netfilter kernel options from generic/config to package/kernel/modules/netfilter.mk http://qi-hw.com/p/openwrt-xburst/ecb4139 | 01:27 |
qi-bot | [commit] nbd: fix a compile error when compiling with glibc (#7816) http://qi-hw.com/p/openwrt-xburst/c73c77e | 01:27 |
qi-bot | [commit] nbd: ath9k: add a patch for dumping the eeprom contents via debugfs http://qi-hw.com/p/openwrt-xburst/7a13c34 | 01:27 |
qi-bot | [commit] nbd: add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point http://qi-hw.com/p/openwrt-xburst/9dd40f1 | 01:27 |
qi-bot | [commit] nbd: mac80211: add missing config override for ath9k http://qi-hw.com/p/openwrt-xburst/04da730 | 01:27 |
qi-bot | [commit] nbd: mac80211: another override http://qi-hw.com/p/openwrt-xburst/1ba003a | 01:27 |
qi-bot | [commit] lars: [kirkwood] Set -mtune to marvell-f http://qi-hw.com/p/openwrt-xburst/d9f45a6 | 01:27 |
qi-bot | [commit] lars: [kirkwood] Add kernel package for the mv_cesa crypto module http://qi-hw.com/p/openwrt-xburst/8302309 | 01:27 |
qi-bot | [commit] acoul: linux/orion: fix iproute2 issue (partially closes ticket #7862) http://qi-hw.com/p/openwrt-xburst/263d7b8 | 01:27 |
qi-bot | [commit] acoul: package/iproute2: update iproute2 to version 2.6.35 http://qi-hw.com/p/openwrt-xburst/6ad2eae | 01:27 |
qi-bot | [commit] jow: [include] ignore vim .swp files when scanning for updates (#7867) http://qi-hw.com/p/openwrt-xburst/f6f48d6 | 01:27 |
qi-bot | [commit] juhosg: package/mtd: write remaining data after adding file to the jffs2 partition http://qi-hw.com/p/openwrt-xburst/b73df9f | 01:27 |
qi-bot | [commit] juhosg: ar71xx: add support for the Zcomax ZCN-1523H-2-8/5-16 boards http://qi-hw.com/p/openwrt-xburst/006386c | 01:27 |
qi-bot | [commit] juhosg: tools/firmware-utils: new tool for the Zcomax devices http://qi-hw.com/p/openwrt-xburst/af9f7ed | 01:27 |
qi-bot | [commit] juhosg: ar71xx: build firmware images for the Zcomax boards http://qi-hw.com/p/openwrt-xburst/217d24e | 01:27 |
qi-bot | [commit] Xiangfu Liu: [centerim] add libgnutls-extra to centerm DEPENDS http://qi-hw.com/p/openwrt-packages/7ec322e | 09:49 |
qi-bot | [commit] Werner Almesberger: Assorted small layout improvements. http://qi-hw.com/p/ben-wpan/fc0acf1 | 22:20 |
qi-bot | [commit] Werner Almesberger: First part of the board bringup: power and clock. http://qi-hw.com/p/ben-wpan/86e556c | 22:20 |
qi-bot | [commit] Juan64Bits: ERC report generated. http://qi-hw.com/p/xue/4402fb5 | 11:36 |
---|---|---|
qi-bot | [commit] Juan64Bits: Routing current sensors. http://qi-hw.com/p/xue/cb21a9a | 13:23 |
qi-bot | [commit] Werner Almesberger: Be more careful with "volatile". It still worked, but was not a good example. http://qi-hw.com/p/ben-blinkenlights/979a631 | 02:11 |
---|---|---|
qi-bot | [commit] Juan64Bits: PSU Modifying. http://qi-hw.com/p/xue/9161ab1 | 13:57 |
qi-bot | [commit] Werner Almesberger: Added components (transistor and balun) for the uSD variant. http://qi-hw.com/p/ben-wpan/7c1383d | 22:55 |
qi-bot | [commit] Werner Almesberger: atusd/: first try at a uSD-based board. Improved RF design. http://qi-hw.com/p/ben-wpan/dd999eb | 22:55 |
qi-bot | [commit] Werner Almesberger: atusd/cam/: CAM data for cutting the PCB. http://qi-hw.com/p/ben-wpan/eb6f066 | 22:55 |
qi-bot | [commit] Werner Almesberger: modules/usd-card.fpd: renamed "depth" to "push" and increased from 1.3 mm to http://qi-hw.com/p/kicad-libs/e6fd40b | 00:04 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: [xburst] add default command line for kernel http://qi-hw.com/p/openwrt-xburst/fb4e180 | 01:30 |
qi-bot | [commit] Werner Almesberger: modules/stdpass.fpd, originally from gta02-core http://qi-hw.com/p/kicad-libs/7ca5701 | 03:01 |
qi-bot | [commit] Xiangfu Liu: [xburst] build zImage, but not copy to bin/ http://qi-hw.com/p/openwrt-xburst/9f94731 | 03:13 |
qi-bot | [commit] Xiangfu Liu: [xburst] add config and README file for build xbboot image http://qi-hw.com/p/openwrt-xburst/1501b07 | 03:13 |
qi-bot | [commit] bartbes: Fixed segfault when CARD_ROOT didn't exist & added _CARD_ROOT http://qi-hw.com/p/gmenu2x/6381674 | 11:39 |
qi-bot | [commit] bartbes: More fixed for when CARD_ROOT doesn't exist http://qi-hw.com/p/gmenu2x/cf9628a | 16:12 |
qi-bot | [commit] bartbes: Automatically switches CARD_ROOT to / when CARD_ROOT doesn't exist http://qi-hw.com/p/gmenu2x/5c05348 | 16:52 |
qi-bot | [commit] bartbes: Updated gmenu2x makefile to use newest version http://qi-hw.com/p/openwrt-packages/6ce3263 | 17:17 |
qi-bot | [commit] Bas Wijnen: working on mass storage http://qi-hw.com/p/iris/61d76aa | 17:28 |
qi-bot | [commit] Werner Almesberger: modules/stdpass.fpd: added experimental -M variants for manual soldering that http://qi-hw.com/p/kicad-libs/476841d | 17:50 |
qi-bot | [commit] Werner Almesberger: Get stdpass from kicad-libs. Added bbl.cmp to make pcbnew happy. http://qi-hw.com/p/ben-blinkenlights/87f1ae7 | 18:08 |
qi-bot | [commit] Werner Almesberger: Cleaned up bbl.c and added comments. http://qi-hw.com/p/ben-blinkenlights/1f509de | 20:52 |
qi-bot | [commit] Juan José Díaz Vecchio: Aded 2 phototransistors; removed accelerometer, i2c http://qi-hw.com/p/sie-ceimtun/710236c | 23:13 |
qi-bot | [commit] Werner Almesberger: Fix two bugs left from the great reorganization. http://qi-hw.com/p/ben-wpan/80c6f3e | 00:47 |
---|---|---|
qi-bot | [commit] Werner Almesberger: Debugged and cleaned up schps2pdf. http://qi-hw.com/p/ben-wpan/541dd04 | 02:06 |
qi-bot | [commit] Werner Almesberger: ben-dispshell-outside-100um is done. http://qi-hw.com/p/ben-scans/1462d9d | 03:29 |
qi-bot | [commit] Werner Almesberger: ben-dispshell-inside-1mm is done. http://qi-hw.com/p/ben-scans/6564423 | 03:33 |
qi-bot | [commit] Andres Calderon: 2.5V current sensor added http://qi-hw.com/p/xue/136717f | 09:32 |
qi-bot | [commit] Carlos Camargo: Fixing some examples, adding scripts for compiling xilinx libs with ghdl http://qi-hw.com/p/nn-usb-fpga/acf516e | 10:42 |
qi-bot | [commit] Juan64Bits: Modifying USB H-D http://qi-hw.com/p/xue/d02e783 | 14:16 |
qi-bot | [commit] Werner Almesberger: Split gitsch2ppm into its constituents. http://qi-hw.com/p/ben-wpan/b3f2014 | 01:10 |
---|---|---|
qi-bot | [commit] Werner Almesberger: Merged the functionality of gitsch2ppm into schhist2web. http://qi-hw.com/p/ben-wpan/8005773 | 03:47 |
qi-bot | [commit] Werner Almesberger: Sheet names now link to the sheet's PDF. http://qi-hw.com/p/ben-wpan/337f13a | 03:47 |
qi-bot | [commit] Werner Almesberger: Generate a PDF with the all the current sheets. http://qi-hw.com/p/ben-wpan/ab89a00 | 03:47 |
qi-bot | [commit] Werner Almesberger: Commit entries now show date date, not the hash. http://qi-hw.com/p/ben-wpan/6bef1d9 | 03:47 |
qi-bot | [commit] Werner Almesberger: We now generate and link delta PDFs with the state(s) of the sheet. http://qi-hw.com/p/ben-wpan/66cf6a2 | 05:08 |
qi-bot | [commit] Andres Calderon: cleanup http://qi-hw.com/p/xue/3c47706 | 11:41 |
qi-bot | [commit] Andres Calderon: FPGA has been splited http://qi-hw.com/p/xue/107ffeb | 11:47 |
qi-bot | [commit] Juan64Bits: Making power source http://qi-hw.com/p/xue/01429d2 | 20:49 |
qi-bot | [commit] Werner Almesberger: Attempt at avoiding the false changes seen on Xue. Seems that alpha-blending http://qi-hw.com/p/ben-wpan/78f6cfb | 22:20 |
qi-bot | [commit] Werner Almesberger: Fixed some smaller bugs and slightly improved formatting of commit entries. http://qi-hw.com/p/ben-wpan/a0cdb1e | 22:20 |
qi-bot | [commit] Werner Almesberger: Files in the first commit didn't have an HTML wrapper with PDF link. http://qi-hw.com/p/ben-wpan/20184ed | 22:20 |
qi-bot | [commit] Werner Almesberger: Reduce the number of I/O redirections. http://qi-hw.com/p/ben-wpan/6260614 | 22:20 |
qi-bot | [commit] Werner Almesberger: Reorganized cache and output directory structure. Some code cleanup. http://qi-hw.com/p/ben-wpan/a3aac7e | 22:20 |
qi-bot | [commit] Werner Almesberger: fpd2pdf: ignore fped backup files (and option -a to still use them) http://qi-hw.com/p/ben-wpan/b3728b5 | 00:46 |
---|---|---|
qi-bot | [commit] Werner Almesberger: Minor code cleanup and robustness improvement. http://qi-hw.com/p/ben-wpan/3ca646c | 00:46 |
qi-bot | [commit] Werner Almesberger: Generate commit entry and show diffs also for the first commit. Plus cleanup. http://qi-hw.com/p/ben-wpan/56a9504 | 00:46 |
qi-bot | [commit] Neil Stockbridge: The help text in Nightsky is now more accurate http://qi-hw.com/p/openwrt-packages/ec36abc | 01:22 |
qi-bot | [commit] Werner Almesberger: Optimize cache usage by symlinking identical PPMs. http://qi-hw.com/p/ben-wpan/02e2bf5 | 02:44 |
qi-bot | [commit] Werner Almesberger: Despite trying to be careful with quoting, some spaces in file names still http://qi-hw.com/p/ben-wpan/cfbdd45 | 02:44 |
qi-bot | [commit] Werner Almesberger: ben-dispshell-outside: 1 mm and 500 um scans are done. http://qi-hw.com/p/ben-scans/aedcb76 | 10:02 |
qi-bot | [commit] Juan64Bits: Something routing http://qi-hw.com/p/xue/27b4eac | 17:58 |
qi-bot | [commit] Juan64Bits: Cleaning http://qi-hw.com/p/xue/867023b | 18:56 |
qi-bot | [commit] Werner Almesberger: scripts/: minor Makefile cleanup. http://qi-hw.com/p/ben-wpan/081aed3 | 22:22 |
qi-bot | [commit] Werner Almesberger: Schematics sheets are now scaled and shifted (may still need some tuning) http://qi-hw.com/p/ben-wpan/a1c5386 | 22:22 |
qi-bot | [commit] Werner Almesberger: Copied WPAN-ARTF design files over for WPAN-CCRF. http://qi-hw.com/p/ben-wpan/dce1c10 | 22:22 |
qi-bot | [commit] Werner Almesberger: Put main components for the CC2520-based design on the schematics. http://qi-hw.com/p/ben-wpan/e4b7574 | 22:22 |
qi-bot | [commit] Werner Almesberger: U-turn: The US restrict export of the CC2520. Atmel scores a design win. http://qi-hw.com/p/ben-wpan/7fbcfaa | 22:22 |
qi-bot | [commit] Werner Almesberger: Removed the CC2520 from AUTHORS as well. http://qi-hw.com/p/ben-wpan/a61e9da | 22:22 |
qi-bot | [commit] Andres Calderon: 5V out DC-DC added http://qi-hw.com/p/xue/d9b9c84 | 23:02 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: test-memory-card.sh: cleanup the output message, modify by Adam http://qi-hw.com/p/nn-usb-fpga/b6f32d5 | 23:42 |
qi-bot | [commit] Werner Almesberger: Tools for making a browseable graphical revision history of schematics. http://qi-hw.com/p/ben-wpan/c10d643 | 03:00 |
---|---|---|
qi-bot | [commit] Werner Almesberger: Fixed two small bugs in schhist2web. http://qi-hw.com/p/ben-wpan/1774ae2 | 03:55 |
qi-bot | [commit] Werner Almesberger: Allow markup to be synchronized with other (better resolution) pair of http://qi-hw.com/p/ben-wpan/0d53761 | 05:47 |
qi-bot | [commit] Werner Almesberger: ben-kbd-bottom-100um is not pretty but it's done. (Data files and Web index.) http://qi-hw.com/p/ben-scans/a939369 | 15:10 |
qi-bot | [commit] Werner Almesberger: schhist2web: use a cache by default and give the user control over it. http://qi-hw.com/p/ben-wpan/099b626 | 15:13 |
qi-bot | [commit] Werner Almesberger: schhist2web: better technical and visual quality of HTML output. http://qi-hw.com/p/ben-wpan/5761b6e | 15:13 |
qi-bot | [commit] Werner Almesberger: ppmdiff detects lack of changes more quickly. Improved cache robustness. http://qi-hw.com/p/ben-wpan/94dc35e | 15:13 |
qi-bot | [commit] Werner Almesberger: Only use commits that change anything we care about. Accelerates full build http://qi-hw.com/p/ben-wpan/43d512c | 15:13 |
qi-bot | [commit] Werner Almesberger: Run eeschema only once (not twice) per commit. 20% speed improvement. http://qi-hw.com/p/ben-wpan/a241265 | 15:13 |
qi-bot | [commit] Werner Almesberger: Add links to project page and commit. Put placeholder if sheet doesn't change. http://qi-hw.com/p/ben-wpan/627d7d7 | 15:13 |
qi-bot | [commit] Werner Almesberger: Allow schhist2web and friends to run from a directory outside the working tree. http://qi-hw.com/p/ben-wpan/d7d95ff | 20:41 |
qi-bot | [commit] Werner Almesberger: New script sanitize-profile to remove glitches from a KiCad profile. http://qi-hw.com/p/ben-wpan/2921bce | 20:41 |
qi-bot | [commit] Werner Almesberger: Work-around for "black block symbol" syndrome. http://qi-hw.com/p/ben-wpan/45935dc | 20:41 |
qi-bot | [commit] Werner Almesberger: Thumbnails of new and deleted sheets were grey, not green/red. http://qi-hw.com/p/ben-wpan/daa4501 | 20:41 |
qi-bot | [commit] Werner Almesberger: scripts/fpd2pdf: Print a set of Fped files into a PDF http://qi-hw.com/p/ben-wpan/9e91233 | 22:30 |
qi-bot | [commit] Andres Calderon: DC-DC 1.2 and 3.3 routed http://qi-hw.com/p/xue/0f191b6 | 00:03 |
---|---|---|
qi-bot | [commit] Werner Almesberger: ben-bottom-nobat-100um data files. http://qi-hw.com/p/ben-scans/cd3a3b9 | 00:23 |
qi-bot | [commit] Werner Almesberger: ben-bottom-inside2-* data files. http://qi-hw.com/p/ben-scans/827c705 | 00:23 |
qi-bot | [commit] Werner Almesberger: ben-kbd-bottom, 1mm and 500 um data. http://qi-hw.com/p/ben-scans/988d3f4 | 01:07 |
qi-bot | [commit] Werner Almesberger: Index page update for recent completions. http://qi-hw.com/p/ben-scans/42f6a99 | 01:13 |
qi-bot | [commit] Andres Calderon: usb device connector added http://qi-hw.com/p/xue/9118b6b | 01:43 |
qi-bot | [commit] Werner Almesberger: atrf/ecn/ecn0002.txt: added measurements after making boards use 12 pF and http://qi-hw.com/p/ben-wpan/fe8bdac | 14:50 |
qi-bot | [commit] Werner Almesberger: More RF research for the ECNs (balun and layout) http://qi-hw.com/p/ben-wpan/2406f67 | 14:50 |
qi-bot | [commit] Werner Almesberger: Disable CLKM in atspi-txrx, to reduce interferences. http://qi-hw.com/p/ben-wpan/078ec87 | 14:50 |
qi-bot | [commit] Neil Stockbridge: Nightsky now refers to a less broken upstream version and -rpath-link has moved to the OpenWRT Makefile http://qi-hw.com/p/openwrt-packages/5327b07 | 16:49 |
qi-bot | [commit] Andres Calderon: FAN4010 added http://qi-hw.com/p/xue/108e963 | 20:33 |
qi-bot | [commit] Andres Calderon: MLP6 footprint added http://qi-hw.com/p/xue/148559e | 21:26 |
qi-bot | [commit] Andres Calderon: FAN4010 initial placement http://qi-hw.com/p/xue/16558b0 | 21:26 |
qi-bot | [commit] Andres Calderon: fix http://qi-hw.com/p/xue/a06de4c | 22:11 |
qi-bot | [commit] Xiangfu Liu: move all reflash scripts to reflash/ folder http://qi-hw.com/p/nn-usb-fpga/80e8ce9 | 22:37 |
qi-bot | [commit] Xiangfu Liu: add nightsky http://qi-hw.com/p/openwrt-xburst/4f7ca2b | 23:30 |
qi-bot | [commit] Xiangfu Liu: add TestADC file http://qi-hw.com/p/nn-usb-fpga/b672b6c | 23:46 |
qi-bot | [commit] Andres Calderon: added copper pours http://qi-hw.com/p/xue/8dfb8bb | 00:31 |
---|---|---|
qi-bot | [commit] Werner Almesberger: Introduce PLATFORM_ENTER, replacing the old PLATFORM_SETUP for DFU mode http://qi-hw.com/p/f32xbase/5ce904b | 03:33 |
qi-bot | [commit] Werner Almesberger: Got "cntr" to show signs of life. It was the watchdog, as usual. http://qi-hw.com/p/ben-wpan/3584b5b | 03:37 |
qi-bot | [commit] Werner Almesberger: The parasitic capacitance of the three probe input pins and R1 formed a http://qi-hw.com/p/ben-wpan/81ab679 | 05:55 |
qi-bot | [commit] Werner Almesberger: Added user-space counter utility. http://qi-hw.com/p/ben-wpan/4d49921 | 05:55 |
qi-bot | [commit] Andres Calderon: 2 ddr decopling capacitor has been replaced http://qi-hw.com/p/xue/437a1bb | 08:33 |
qi-bot | [commit] Andres Calderon: mic2550.lib added http://qi-hw.com/p/xue/279ca24 | 09:05 |
qi-bot | [commit] Andres Calderon: 2.5V USB PHY connected http://qi-hw.com/p/xue/9e5231c | 09:36 |
qi-bot | [commit] Andres Calderon: 2.5V cooper pour extended http://qi-hw.com/p/xue/93e7def | 09:36 |
qi-bot | [commit] Juan64Bits: Routing DDR-2 http://qi-hw.com/p/xue/ac39b82 | 15:25 |
qi-bot | [commit] Werner Almesberger: lib/usb.c (open_usb): Stupid beginner's mistake: wrong operator precedence due http://qi-hw.com/p/f32xbase/79396b1 | 16:31 |
qi-bot | [commit] Werner Almesberger: Made communication with CNTR board more robust. Added documentation. http://qi-hw.com/p/ben-wpan/c7303e4 | 17:49 |
qi-bot | [commit] Werner Almesberger: Added title, author, and revision to all schematics and layouts. http://qi-hw.com/p/ben-wpan/c1b7b81 | 23:58 |
qi-bot | [commit] Werner Almesberger: Populated load capacitors of the crystal. Started organizing issues in ECNs. http://qi-hw.com/p/ben-wpan/5b73e8b | 23:58 |
qi-bot | [commit] Werner Almesberger: Picking time in the middle of the interval, not its edge, and reduce http://qi-hw.com/p/ben-wpan/85ab2c4 | 23:58 |
qi-bot | [commit] Andres Calderon: USB D routing started http://qi-hw.com/p/xue/bbf8fde | 00:11 |
---|---|---|
qi-bot | [commit] Werner Almesberger: Update IRQ_RF after reworking both boards. IRQ_RF was erroneously connected http://qi-hw.com/p/ben-wpan/738618a | 05:17 |
qi-bot | [commit] Werner Almesberger: Finished and tested TX/RX. (LQ doesn't work yet, the rest does.) http://qi-hw.com/p/ben-wpan/73043a5 | 05:17 |
qi-bot | [commit] Werner Almesberger: Setting the transmit power was broken. (And LQ works, by the way.) http://qi-hw.com/p/ben-wpan/2514804 | 06:20 |
qi-bot | [commit] Andres Calderon: USB A Phy has been routed http://qi-hw.com/p/xue/3eea348 | 11:17 |
qi-bot | [commit] Andres Calderon: minor routing progress http://qi-hw.com/p/xue/c3ab9ef | 11:17 |
qi-bot | [commit] Juan64Bits: Routing DDR-B http://qi-hw.com/p/xue/4edf66b | 12:44 |
qi-bot | [commit] Andres Calderon: USB Phy re-routed http://qi-hw.com/p/xue/2e8564b | 19:45 |
qi-bot | [commit] Andres Calderon: 2 new decoupling caps http://qi-hw.com/p/xue/7825f69 | 20:12 |
qi-bot | [commit] Werner Almesberger: f32xbase didn't build on ancient Gentoo due to missing include. http://qi-hw.com/p/f32xbase/bc37839 | 20:15 |
qi-bot | [commit] Werner Almesberger: Requests following a rejected SETUP requests failed too, which sometimes http://qi-hw.com/p/f32xbase/fd09655 | 20:15 |
qi-bot | [commit] Werner Almesberger: lib/usb.c (open_usb): libusb documentation claims that considerable http://qi-hw.com/p/f32xbase/a77a9a6 | 20:15 |
qi-bot | [commit] Werner Almesberger: Added list of to do items and known bugs. http://qi-hw.com/p/ben-wpan/c01a5e0 | 20:15 |
qi-bot | [commit] Werner Almesberger: Minor potential improvements of USB robustness. http://qi-hw.com/p/ben-wpan/8f744bb | 20:15 |
qi-bot | [commit] Werner Almesberger: Literature consistently calls the Link Quality Indication LQI, not LQ. So do http://qi-hw.com/p/ben-wpan/bb7b049 | 20:15 |
qi-bot | [commit] Juan64Bits: Kernel image uploading http://qi-hw.com/p/nn-usb-fpga/1ef32f4 | 23:03 |
qi-bot | [commit] Werner Almesberger: Renamed fw/boot/ to fw/atspi-boot/. Fixed build problem in fw/atspi-boot/. http://qi-hw.com/p/ben-wpan/d6b045c | 12:39 |
---|---|---|
qi-bot | [commit] Werner Almesberger: Moved fw/ and tools/ into atrf/ as well. http://qi-hw.com/p/ben-wpan/c2dd238 | 12:39 |
qi-bot | [commit] Werner Almesberger: Registers and register values are now CPU-specific. http://qi-hw.com/p/f32xbase/1c7150c | 13:27 |
qi-bot | [commit] Werner Almesberger: - fw/common/regs-f320.h: include mcs51/C8051F320.h, not mcs51/C8051F326.h http://qi-hw.com/p/f32xbase/0f1c0ea | 13:32 |
qi-bot | [commit] Werner Almesberger: Basic framework for CNTR firmware. http://qi-hw.com/p/ben-wpan/5109e0b | 13:34 |
qi-bot | [commit] Bas Wijnen: working boot loader http://qi-hw.com/p/iris/aef8331 | 17:56 |
qi-bot | [commit] Werner Almesberger: Added timer register values. http://qi-hw.com/p/f32xbase/d1b3966 | 18:56 |
qi-bot | [commit] Werner Almesberger: Completed the basic counter firmware. Now it just has to work ... http://qi-hw.com/p/ben-wpan/5514c33 | 18:56 |
qi-bot | [commit] Werner Almesberger: Minor comment cleanup. http://qi-hw.com/p/f32xbase/d254ca8 | 20:28 |
qi-bot | [commit] Werner Almesberger: atspi-trim: utility to set the crystal trimming capacitors. http://qi-hw.com/p/ben-wpan/b770051 | 20:49 |
qi-bot | [commit] Andres Calderon: USB A routing http://qi-hw.com/p/xue/cb3f03d | 22:52 |
qi-bot | [commit] Werner Almesberger: tools/atspi-rssi/: spectrum scan utility http://qi-hw.com/p/ben-wpan/723cfad | 05:51 |
---|---|---|
qi-bot | [commit] Werner Almesberger: atspi-reset: utility to reset transceiver or entire board. http://qi-hw.com/p/ben-wpan/419b596 | 05:51 |
qi-bot | [commit] Werner Almesberger: Added Makefile to build/install/etc. all the ATSPI utilities. http://qi-hw.com/p/ben-wpan/e514c0f | 05:51 |
qi-bot | [commit] Werner Almesberger: Additions to bookshelf: AT86RF230 programmer's guide and 2.4 GHz regulations. http://qi-hw.com/p/ben-wpan/d8c71a3 | 05:51 |
qi-bot | [commit] Andres Calderon: NAND flash routed http://qi-hw.com/p/xue/7500694 | 09:25 |
qi-bot | [commit] Andres Calderon: debug+prog connector added http://qi-hw.com/p/xue/980b853 | 14:36 |
qi-bot | [commit] Bas Wijnen: booting from nand works http://qi-hw.com/p/iris/04ed743 | 16:04 |
qi-bot | [commit] Juan64Bits: Routing DDR-1 http://qi-hw.com/p/xue/cb47952 | 16:40 |
qi-bot | [commit] Andres Calderon: cleanup http://qi-hw.com/p/xue/f168be6 | 16:42 |
qi-bot | [commit] Juan64Bits: Routing DDR-1 http://qi-hw.com/p/xue/a02ea13 | 18:25 |
qi-bot | [commit] neil: There is now a port of Nightsky - a very basic rendering of the stars in the sky http://qi-hw.com/p/openwrt-packages/0ba991d | 19:26 |
qi-bot | [commit] Neil Stockbridge: Merge branch 'master' of git@projects.qi-hardware.com:openwrt-packages http://qi-hw.com/p/openwrt-packages/df0635c | 19:26 |
qi-bot | [commit] Andres Calderon: MLF16 added http://qi-hw.com/p/xue/ce931a0 | 19:34 |
qi-bot | [commit] Andres Calderon: USB phy component has been changed http://qi-hw.com/p/xue/fca9926 | 20:07 |
qi-bot | [commit] Werner Almesberger: Moved hardware design files from top-level directory to atrf/ http://qi-hw.com/p/ben-wpan/2c29b5b | 20:45 |
qi-bot | [commit] Werner Almesberger: New circuit: an arbitrary-precision counter. http://qi-hw.com/p/ben-wpan/5553d3e | 20:45 |
qi-bot | [commit] Werner Almesberger: Forgot cntr/Makefile. Added ground fill. http://qi-hw.com/p/ben-wpan/51de2a5 | 20:45 |
qi-bot | [commit] Andres Calderon: second usb-host added http://qi-hw.com/p/xue/c3a2373 | 21:31 |
qi-bot | [commit] Werner Almesberger: cntr/cntr.brd: remove the ground fill. The board got a bit messy with it. http://qi-hw.com/p/ben-wpan/9c2deb8 | 23:53 |
qi-bot | [commit] Werner Almesberger: Added register definitons and simplified register naming. http://qi-hw.com/p/ben-wpan/1d777aa | 00:43 |
---|---|---|
qi-bot | [commit] Werner Almesberger: fw/atspi/atspi.c (reset_rf): added reset timing measurement http://qi-hw.com/p/ben-wpan/44f0c38 | 00:43 |
qi-bot | [commit] Werner Almesberger: Enter TRX_OFF to enable DVDD regulator. Plus minor cleanup. http://qi-hw.com/p/ben-wpan/7a534d2 | 00:43 |
qi-bot | [commit] Andres Calderon: ddr-vref improved placement http://qi-hw.com/p/xue/1ba7525 | 08:18 |
qi-bot | [commit] Andres Calderon: some eth-phy to s6 nets has been routed http://qi-hw.com/p/xue/4193109 | 10:03 |
qi-bot | [commit] Andres Calderon: some eth-phy to s6 nets has been routed http://qi-hw.com/p/xue/195bfb9 | 10:14 |
qi-bot | [commit] Andres Calderon: s6 to eth-phy connections has been completed http://qi-hw.com/p/xue/30b1282 | 17:39 |
qi-bot | [commit] Andres Calderon: nand routing just started http://qi-hw.com/p/xue/de965fa | 19:08 |
qi-bot | [commit] Werner Almesberger: A new try at config.h management: moved it to ../common, along with io.h http://qi-hw.com/p/ben-wpan/57f3427 | 00:51 |
---|---|---|
qi-bot | [commit] Werner Almesberger: Generate port, bit, and output mode definitions from io.h http://qi-hw.com/p/ben-wpan/f8cd15e | 00:51 |
qi-bot | [commit] Werner Almesberger: Turn the LED on while in the boot loader. http://qi-hw.com/p/ben-wpan/3c87d9f | 00:51 |
qi-bot | [commit] Werner Almesberger: Implemented AT86RF230 reset and access modes. (Completely untested.) http://qi-hw.com/p/ben-wpan/5447951 | 00:51 |
qi-bot | [commit] Werner Almesberger: Added library for items commonly shared among tools. http://qi-hw.com/p/f32xbase/7501137 | 13:26 |
qi-bot | [commit] Werner Almesberger: version.h is no longer generated and it thus only creates confusion if http://qi-hw.com/p/f32xbase/2a58505 | 13:26 |
qi-bot | [commit] Werner Almesberger: Put libraries at end of linker invocation to make it work with local http://qi-hw.com/p/f32xbase/fa7fb48 | 15:16 |
qi-bot | [commit] Werner Almesberger: - fw/atspi/Makefile (USB_ID): corrected and updated USB ID extraction http://qi-hw.com/p/ben-wpan/9a6b3fc | 15:27 |
qi-bot | [commit] Werner Almesberger: More config rearranging: USB IDs are now in include/atspi/usb-ids.h, which http://qi-hw.com/p/ben-wpan/537c675 | 15:27 |
qi-bot | [commit] Werner Almesberger: Simplified the presentation of build date information and added a http://qi-hw.com/p/ben-wpan/bb4b07f | 15:27 |
qi-bot | [commit] Werner Almesberger: Fix typo and make "make dfu" work again. http://qi-hw.com/p/ben-wpan/bf74a03 | 15:27 |
qi-bot | [commit] Werner Almesberger: Introduce library with ATSPI access functions (largely untested) http://qi-hw.com/p/ben-wpan/ac349b0 | 15:27 |
qi-bot | [commit] Juan64Bits: Routing http://qi-hw.com/p/xue/899d599 | 17:39 |
qi-bot | [commit] Andres Calderon: some eth-phy to s6 nets has been routed http://qi-hw.com/p/xue/033f361 | 19:11 |
qi-bot | [commit] Andres Calderon: some eth-phy to s6 nets has been routed http://qi-hw.com/p/xue/e0d4a59 | 20:10 |
qi-bot | [commit] Andres Calderon: some eth-phy to s6 nets has been routed http://qi-hw.com/p/xue/7c3c9a8 | 21:07 |
qi-bot | [commit] Andres Calderon: some eth-phy to s6 nets has been routed http://qi-hw.com/p/xue/a56645a | 21:10 |
qi-bot | [commit] Werner Almesberger: Active-high IRQ_RF was routed to active-low interrupt input http://qi-hw.com/p/ben-wpan/1d07933 | 22:20 |
qi-bot | [commit] Werner Almesberger: xxx_MODE were used as if they were port bits, not registers. http://qi-hw.com/p/ben-wpan/14c1b4c | 22:20 |
qi-bot | [commit] Werner Almesberger: We can now read the transceiver's registers. http://qi-hw.com/p/ben-wpan/4b20421 | 22:20 |
qi-bot | [commit] Werner Almesberger: Added boot loader for C8051F326 (using f326xbase) http://qi-hw.com/p/ben-wpan/00f2825 | 00:15 |
---|---|---|
qi-bot | [commit] Werner Almesberger: Boot loader Makefile cleanup. http://qi-hw.com/p/ben-wpan/2c8c609 | 00:15 |
qi-bot | [commit] Xiangfu Liu: [guile] add comment, this package needs guile installed in host pc http://qi-hw.com/p/openwrt-packages/386b737 | 03:16 |
qi-bot | [commit] Xiangfu Liu: add [kbd] and [console-fonts] to config http://qi-hw.com/p/openwrt-xburst/66055c9 | 04:18 |
qi-bot | [commit] Andres Calderon: eth-phy routing startted http://qi-hw.com/p/xue/f4bebe5 | 06:41 |
qi-bot | [commit] Werner Almesberger: fw/boot/boot.c (boot_loader): removed description of IDBG-specific power http://qi-hw.com/p/f32xbase/97d2ed1 | 08:04 |
qi-bot | [commit] Werner Almesberger: fw/atspi/: added application with basic EP0 protocol http://qi-hw.com/p/ben-wpan/ada1ee0 | 08:05 |
qi-bot | [commit] Xiangfu Liu: add test-memory-card.sh http://qi-hw.com/p/nn-usb-fpga/6214615 | 09:57 |
qi-bot | [commit] Andres Calderon: PSU ICs has been selected http://qi-hw.com/p/xue/f12b0a7 | 10:52 |
qi-bot | [commit] Yanjun Luo: Change everything to small footprint. http://qi-hw.com/p/mmone-jtag-serial-cable/e2701b3 | 11:46 |
qi-bot | [commit] kyak: gmu-0.7.1 md5sum updated http://qi-hw.com/p/openwrt-packages/6836a72 | 01:29 |
---|---|---|
qi-bot | [commit] Werner Almesberger: Brown paper bag time: the VDD net was connected to VBUS, not VDD/VIO. http://qi-hw.com/p/ben-wpan/524665f | 14:47 |
qi-bot | [commit] Werner Almesberger: Net name correction, layout update. http://qi-hw.com/p/ben-wpan/c9e61ee | 16:22 |
qi-bot | [commit] Juan64Bits: Somthing routing http://qi-hw.com/p/xue/048e8b4 | 21:16 |
qi-bot | [commit] Werner Almesberger: ben-dispbase-back-100um is done. Pushing data files ... http://qi-hw.com/p/ben-scans/7d7fb57 | 22:19 |
qi-bot | [commit] Werner Almesberger: Index page update for ben-dispbase-back-100um completion. http://qi-hw.com/p/ben-scans/32b3148 | 22:28 |
qi-bot | [commit] Andres Calderon: DFN10 footprint added http://qi-hw.com/p/xue/76c9526 | 22:37 |
qi-bot | [commit] Andres Calderon: 3.3v dc-dc added http://qi-hw.com/p/xue/e2867d7 | 23:10 |
qi-bot | [commit] Andres Calderon: DDR0 termaintor placement http://qi-hw.com/p/xue/5c25d1c | 00:31 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: add console fonts package http://qi-hw.com/p/openwrt-packages/be138dd | 06:12 |
qi-bot | [commit] Xiangfu Liu: update email address http://qi-hw.com/p/openwrt-packages/d918c83 | 06:12 |
qi-bot | [commit] Andres Calderon: ddr terminators placment http://qi-hw.com/p/xue/00a88f8 | 20:05 |
qi-bot | [commit] Andres Calderon: fpga decoupling cap. placement improved http://qi-hw.com/p/xue/7be9df3 | 20:37 |
qi-bot | [commit] Andres Calderon: fpga decoupling cap. placement improved http://qi-hw.com/p/xue/ef7e116 | 20:50 |
qi-bot | [commit] Lars-Peter Clausen: Add build variants support to InstallDev http://qi-hw.com/p/openwrt-xburst/ef19f3c | 05:56 |
---|---|---|
qi-bot | [commit] Lars-Peter Clausen: [package] ncurses: Add libncursesw package http://qi-hw.com/p/openwrt-xburst/4866c73 | 05:56 |
qi-bot | [commit] Xiangfu Liu: update copyright to 3.9.1 format http://qi-hw.com/p/xburst-tools/c08a8d0 | 06:03 |
qi-bot | [commit] Xiangfu Liu: update the changelog time stamp http://qi-hw.com/p/xburst-tools/0aebda3 | 06:03 |
qi-bot | [commit] Xiangfu Liu: remove the comments http://qi-hw.com/p/xburst-tools/a851a37 | 06:12 |
qi-bot | [commit] Juan64Bits: General issues corrected http://qi-hw.com/p/xue/9202afd | 12:57 |
qi-bot | [commit] Andres Calderon: attiny.lib added http://qi-hw.com/p/xue/263badf | 14:54 |
qi-bot | [commit] Andres Calderon: MLF20m1 footprint added http://qi-hw.com/p/xue/43db224 | 14:54 |
qi-bot | [commit] Andres Calderon: Merge branch 'master' of projects.qi-hardware.com:xue http://qi-hw.com/p/xue/91cfffd | 14:54 |
qi-bot | [commit] Juan64Bits: Series resistors (DDR) added http://qi-hw.com/p/xue/1602624 | 17:33 |
qi-bot | [commit] Juan64Bits: Library path fixed http://qi-hw.com/p/xue/6c2e360 | 17:50 |
qi-bot | [commit] Andres Calderon: terminal resistors placement http://qi-hw.com/p/xue/ba734f7 | 20:07 |
qi-bot | [commit] Andres Calderon: terminal resistors placement http://qi-hw.com/p/xue/f1c6506 | 20:37 |
qi-bot | [commit] Andres Calderon: ddr termination placement http://qi-hw.com/p/xue/2df63e4 | 21:56 |
qi-bot | [commit] Xiangfu Liu: [guile] add development files http://qi-hw.com/p/openwrt-packages/7e25991 | 22:00 |
qi-bot | [commit] Andres Calderon: PSU sheet added http://qi-hw.com/p/xue/a1ba8c9 | 22:10 |
qi-bot | [commit] Andres Calderon: MLF20m1 fixed http://qi-hw.com/p/xue/b05f6ed | 22:35 |
qi-bot | [commit] Andres Calderon: PSU controller added http://qi-hw.com/p/xue/8cf60ce | 22:50 |
qi-bot | [commit] Andres Calderon: DDR0 termaintor placement http://qi-hw.com/p/xue/cf1645b | 23:49 |
qi-bot | [commit] Jiri Brozovsky: Compilation problems should be fixed. http://qi-hw.com/p/openwrt-packages/34a4bbc | 05:48 |
---|---|---|
qi-bot | [commit] Mirko Vogt: add new gmu icon http://qi-hw.com/p/openwrt-xburst/cd8e663 | 07:26 |
qi-bot | [commit] Mirko Vogt: adjust config to 2 new packages in feed packages/ http://qi-hw.com/p/openwrt-xburst/11ee72f | 07:26 |
qi-bot | [commit] Mirko Vogt: [config] preselect bsd-games (tetris, backgammon, primes, worms) and calcurse http://qi-hw.com/p/openwrt-xburst/ddfccf5 | 07:26 |
qi-bot | [commit] Mirko Vogt: [config] adjust config to new feed versions (once again) http://qi-hw.com/p/openwrt-xburst/9c13c44 | 07:26 |
qi-bot | [commit] Mirko Vogt: [config] do not include packages <ntpdate> and <ntpclient> http://qi-hw.com/p/openwrt-xburst/df798b6 | 07:26 |
qi-bot | [commit] Mirko Vogt: [gmu] update 0.7.0 -> 0.7.1 http://qi-hw.com/p/openwrt-packages/4f0bbdf | 07:28 |
qi-bot | [commit] Mirko Vogt: Merge branch 'master' of projects.qi-hardware.com:openwrt-packages http://qi-hw.com/p/openwrt-packages/5340103 | 07:28 |
qi-bot | [commit] Mirko Vogt: [mandoc] (re)add mandoc, as compilation issues were fixed http://qi-hw.com/p/openwrt-xburst/37b39cd | 07:50 |
qi-bot | [commit] bartbes: Wordgrinder: Builds, marked broken until upstream accepts ncurses patch http://qi-hw.com/p/openwrt-packages/8479332 | 13:43 |
qi-bot | [commit] Andres Calderon: eth-phy placement http://qi-hw.com/p/xue/ef72b75 | 08:43 |
---|---|---|
qi-bot | [commit] Andres Calderon: fixed xil2kc.py error http://qi-hw.com/p/xue/a8ff17c | 09:14 |
qi-bot | [commit] Andres Calderon: fixed xc6slx45fgg484.lib error http://qi-hw.com/p/xue/bd8f8b9 | 09:16 |
qi-bot | [commit] Andres Calderon: fixed FPGA component bug http://qi-hw.com/p/xue/4110ee2 | 09:24 |
qi-bot | [commit] Andres Calderon: fix http://qi-hw.com/p/xue/170ed5a | 11:44 |
qi-bot | [commit] Mirko Vogt: [mandoc]: mark as broken, as it does not compile http://qi-hw.com/p/openwrt-packages/273bf80 | 20:17 |
qi-bot | [commit] Mirko Vogt: Merge branch 'master' of projects.qi-hardware.com:openwrt-packages http://qi-hw.com/p/openwrt-packages/272a628 | 20:17 |
qi-bot | [commit] Werner Almesberger: cam/: scripts for cutting the PCB (just the board - traces are etched) http://qi-hw.com/p/ben-wpan/2cb3f18 | 21:39 |
qi-bot | [commit] Werner Almesberger: Typo causing silent failure. $z would be Perl, but this is Python. http://qi-hw.com/p/ben-wpan/9bf969e | 22:59 |
qi-bot | [commit] Werner Almesberger: Typo causing silent failure: forgot the semicolon, so "doit" thought these http://qi-hw.com/p/ben-wpan/12ebe2c | 22:59 |
qi-bot | [commit] Xiangfu Liu: fix the tar parameter, rootfs name, some cleanup http://qi-hw.com/p/nn-usb-fpga/300b07c | 05:58 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: Merge branch 'master' of projects.qi-hardware.com:nn-usb-fpga http://qi-hw.com/p/nn-usb-fpga/a049e30 | 05:58 |
qi-bot | [commit] Xiangfu Liu: fixed LED D5 not work well http://qi-hw.com/p/nn-usb-fpga/677a5ab | 06:00 |
qi-bot | [commit] Werner Almesberger: More board cleanup. http://qi-hw.com/p/ben-wpan/a7c04ad | 07:00 |
qi-bot | [commit] florian: backport r22585 to backfire, thanks maddes http://qi-hw.com/p/openwrt-xburst/8bffa3e | 07:03 |
qi-bot | [commit] jow: [backfire] merge r22589 http://qi-hw.com/p/openwrt-xburst/952efd6 | 07:03 |
qi-bot | [commit] jow: [backfire] merge r22593 http://qi-hw.com/p/openwrt-xburst/06a4487 | 07:03 |
qi-bot | [commit] nico: [backfire] backport r22597 http://qi-hw.com/p/openwrt-xburst/6d2845a | 07:03 |
qi-bot | [commit] nico: [backfire] fix dependency issue introduced by r22598 (x86 has no kmod-input-core) http://qi-hw.com/p/openwrt-xburst/305ad84 | 07:03 |
qi-bot | [commit] nico: [backfire] merge r21807 http://qi-hw.com/p/openwrt-xburst/c2a19c9 | 07:03 |
qi-bot | [commit] nico: [backfire] target/x86: add missing kernel debug symbols, fix kconfig going interactive when kernel debugging is enabled (closes: #7711) http://qi-hw.com/p/openwrt-xburst/7379fe1 | 07:03 |
qi-bot | [commit] jow: [backfire] merge r22605 http://qi-hw.com/p/openwrt-xburst/4d2014b | 07:03 |
qi-bot | [commit] jow: [backfire] merge r22602 & r22607 http://qi-hw.com/p/openwrt-xburst/d323f5c | 07:03 |
qi-bot | [commit] jow: [backfire] merge r22614 http://qi-hw.com/p/openwrt-xburst/74a83bb | 07:03 |
qi-bot | [commit] Mir | 07:03 |
qi-bot | [commit] Andres Calderon: preliminary placement improved http://qi-hw.com/p/xue/da7ba80 | 07:17 |
qi-bot | [commit] Mirko Vogt: use feeds.conf.default if no feeds.conf file exists http://qi-hw.com/p/openwrt-xburst/64df31c | 07:35 |
qi-bot | [commit] Mirko Vogt: force using bash, because of bash/dash/whatever-sh incompabilities... http://qi-hw.com/p/openwrt-xburst/56538f6 | 07:35 |
qi-bot | [commit] Andres Calderon: usb added http://qi-hw.com/p/xue/35a1b35 | 10:28 |
qi-bot | [commit] Juan64Bits: FPGA decoupling capacitors http://qi-hw.com/p/xue/37912ec | 12:25 |
qi-bot | [commit] Andres Calderon: spi memory added http://qi-hw.com/p/xue/ef75347 | 16:43 |
qi-bot | [commit] Andres Calderon: VCC fixed http://qi-hw.com/p/xue/333097e | 18:34 |
qi-bot | [commit] Werner Almesberger: Move make_base from cw.py to new module shape.py, to allow sharing http://qi-hw.com/p/ben-counterweight/7da2d7c | 21:32 |
qi-bot | [commit] Werner Almesberger: Draw counterweight shape also on cover. http://qi-hw.com/p/ben-counterweight/64ae378 | 21:32 |
qi-bot | [commit] Werner Almesberger: Generate single sketch for cover sheet instead of one for each part. http://qi-hw.com/p/ben-counterweight/6bf49a1 | 21:32 |
qi-bot | [commit] Werner Almesberger: Print 16 covers on a page. http://qi-hw.com/p/ben-counterweight/c853a09 | 21:32 |
qi-bot | [commit] Andres Calderon: decoupling DDR cap. placement http://qi-hw.com/p/xue/8f8f332 | 23:10 |
qi-bot | [commit] Andres Calderon: decoupling nand flash added http://qi-hw.com/p/xue/e07bc34 | 23:10 |
qi-bot | [commit] Andres Calderon: decoupling nand flash added http://qi-hw.com/p/xue/2161dfc | 23:10 |
qi-bot | [commit] Andres Calderon: improved placement http://qi-hw.com/p/xue/fae8765 | 23:10 |
qi-bot | [commit] kyak: kbd: install dumpkeys; bsd-games: change tetris keymap, fix primes http://qi-hw.com/p/openwrt-packages/3883523 | 04:26 |
---|---|---|
qi-bot | [commit] kyak: centerim: added libcurl and libopenssl dependencies http://qi-hw.com/p/openwrt-packages/80eb3a0 | 04:44 |
qi-bot | [commit] Werner Almesberger: Added QFN28 and QFN32 footprints for MCU and TXRX. http://qi-hw.com/p/ben-wpan/87588be | 08:41 |
qi-bot | [commit] Werner Almesberger: Added COPYING (GPL 2/LGPL 2.1/CC-BY-SA 3.0) and AUTHORS. Put pointer http://qi-hw.com/p/ben-wpan/22af202 | 08:47 |
qi-bot | [commit] Andres Calderon: FB added to USB host http://qi-hw.com/p/xue/7a9ae94 | 09:12 |
qi-bot | [commit] Werner Almesberger: Added NX3225SA 16 MHz crystal (symbol and footprint) http://qi-hw.com/p/ben-wpan/05b0105 | 09:37 |
qi-bot | [commit] Werner Almesberger: KiCad module build and xtal-4 cleanup. http://qi-hw.com/p/ben-wpan/c0127b4 | 10:04 |
qi-bot | [commit] Werner Almesberger: Copied antenna symbol from gta02-core. Updated footprint, and added http://qi-hw.com/p/ben-wpan/73d2b7d | 10:04 |
qi-bot | [commit] Xiangfu Liu: mv reflash to reflash/ http://qi-hw.com/p/nn-usb-fpga/3424aa5 | 10:24 |
qi-bot | [commit] Xiangfu Liu: mv binary files to sie_rootfs_files/ http://qi-hw.com/p/nn-usb-fpga/de6f53a | 10:24 |
qi-bot | [commit] Xiangfu Liu: make create rootfs and reflash automatic a little http://qi-hw.com/p/nn-usb-fpga/18e79c4 | 10:24 |
qi-bot | [commit] Werner Almesberger: Made first draft of schematics. http://qi-hw.com/p/ben-wpan/0efc213 | 12:15 |
qi-bot | [commit] Werner Almesberger: Added modules for test points and solder pads. Some cleanup. http://qi-hw.com/p/ben-wpan/28e2c75 | 14:51 |
qi-bot | [commit] Werner Almesberger: Added default footprints to schematics. http://qi-hw.com/p/ben-wpan/91591ff | 14:51 |
qi-bot | [commit] Werner Almesberger: Updated the LED. http://qi-hw.com/p/ben-wpan/245d87e | 14:51 |
qi-bot | [commit] Andres Calderon: fixed placement http://qi-hw.com/p/xue/e678c0e | 17:13 |
qi-bot | [commit] Andres Calderon: fix http://qi-hw.com/p/xue/ada00cd | 18:18 |
qi-bot | [commit] Carlos Camargo: Adding ghdl simulation to plasma project http://qi-hw.com/p/nn-usb-fpga/1254422 | 20:53 |
qi-bot | [commit] Werner Almesberger: usb.sch cleanup. http://qi-hw.com/p/ben-wpan/090ea77 | 21:36 |
qi-bot | [commit] Werner Almesberger: First layout draft. (No GND areas, not quite following design rules.) http://qi-hw.com/p/ben-wpan/8e6fef1 | 21:36 |
qi-bot | [commit] Werner Almesberger: Added ground fill areas. http://qi-hw.com/p/ben-wpan/6b72015 | 22:22 |
qi-bot | [commit] Andres Calderon: fix http://qi-hw.com/p/xue/e1ce2a9 | 22:32 |
qi-bot | [commit] Mirko Vogt: call generic qmake function and add necessary TARGET_LDFLAGS for recursive library lookup http://qi-hw.com/p/openwrt-packages/e040576 | 13:06 |
---|
qi-bot | [commit] Panthera T. Altaica: Moved to Code::Blocks and GCC http://qi-hw.com/p/wakan-udtn/a725a27 | 01:31 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: cleanup the output message http://qi-hw.com/p/xburst-tools/b21d2e4 | 02:09 |
qi-bot | [commit] Bas Wijnen: start nand-boot; wrap startup http://qi-hw.com/p/iris/e4151e7 | 04:10 |
qi-bot | [commit] Xiangfu Liu: update the debian/changelog http://qi-hw.com/p/xburst-tools/c5fb137 | 04:45 |
qi-bot | [commit] Xiangfu Liu: add debian/watch file http://qi-hw.com/p/xburst-tools/ae00b64 | 04:45 |
qi-bot | [commit] Werner Almesberger: Oops, forgot to commit wpan-atrf.pro http://qi-hw.com/p/ben-wpan/42e8ecb | 06:00 |
qi-bot | [commit] Mirko Vogt: merge over changes from OpenWrt trunk: http://qi-hw.com/p/openwrt-xburst/ff7b2bf | 06:19 |
qi-bot | [commit] Carlos Camargo: making some manufacturer recommendations http://qi-hw.com/p/nn-usb-fpga/8390015 | 10:58 |
qi-bot | [commit] Mirko Vogt: use uClibc version 0.9.32pre by default http://qi-hw.com/p/openwrt-xburst/eab6c33 | 11:08 |
qi-bot | [commit] Mirko Vogt: adjust config to latest revision of openwrt-xburst and feeds listed in feeds.conf.default http://qi-hw.com/p/openwrt-xburst/faee63f | 11:08 |
qi-bot | [commit] Mirko Vogt: config: preselect qt4-packages which require nptl-support, since uClibc 0.9.32 with nptl support got merged over, preselect package <NanoMap> http://qi-hw.com/p/openwrt-xburst/73e7e7a | 11:08 |
qi-bot | [commit] Mirko Vogt: check for <CONFIG_UCLIBC_VERSION="0.9.32"> instead of <CONFIG_UCLIBC_VERSION_0_9_32=y>, as CONFIG_UCLIBC_VERSION_*-booleans are only exposed, when <DEVEL=y> http://qi-hw.com/p/openwrt-xburst/d770d66 | 11:08 |
qi-bot | [commit] Werner Almesberger: Added a data sheet viewer. It improves upon the design used in gta02-core by http://qi-hw.com/p/ben-wpan/6ec22bc | 11:27 |
qi-bot | [commit] nico: [backfire] merge r22561 http://qi-hw.com/p/openwrt-xburst/26d1b0b | 13:05 |
qi-bot | [commit] florian: remove rdc 2.6.32 support from backfire, not used http://qi-hw.com/p/openwrt-xburst/9a92ea2 | 13:05 |
qi-bot | [commit] florian: backport r22259 to backfire http://qi-hw.com/p/openwrt-xburst/431f807 | 13:05 |
qi-bot | [commit] florian: pupdate wrt350nv2-builder to v2.3 (#7580) http://qi-hw.com/p/openwrt-xburst/7bf1f51 | 13:05 |
qi-bot | [commit] florian: backport r22580 to backfire http://qi-hw.com/p/openwrt-xburst/f166e3e | 13:05 |
qi-bot | [commit] Mirko Vogt: Merge branch 'backfire' into xburst http://qi-hw.com/p/openwrt-xburst/62adc73 | 13:05 |
qi-bot | [commit] Mirko Vogt: adjust package/{openssl,mac80211} to openwrt-backfire http://qi-hw.com/p/openwrt-xburst/cf4c25d | 13:05 |
qi-bot | [commit] Andres Calderon: DDR de-coupling caps. added http://qi-hw.com/p/xue/cac88e3 | 18:39 |
qi-bot | [commit] Andres Calderon: SD connector attached to th S6 http://qi-hw.com/p/xue/57948cf | 19:10 |
qi-bot | [commit] Andres Calderon: only a test http://qi-hw.com/p/xue/ef20287 | 19:28 |
qi-bot | [commit] Andres Calderon: VCCs connected http://qi-hw.com/p/xue/a0ee3f9 | 19:52 |
qi-bot | [commit] Juan64Bits: Fixing USB connections http://qi-hw.com/p/xue/11bf380 | 22:25 |
qi-bot | [commit] Xiangfu Liu: [gmenu2x] this patch is out of date http://qi-hw.com/p/openwrt-packages/8e5d78d | 23:28 |
qi-bot | [commit] Werner Almesberger: Meandered inverted F PCB antenna from TI's AN043. http://qi-hw.com/p/ben-wpan/e754b05 | 00:18 |
---|---|---|
qi-bot | [commit] Mirko Vogt: gmenu2x: update to a recent version http://qi-hw.com/p/openwrt-packages/45fc372 | 08:08 |
qi-bot | [commit] jow: [backfire] merge r21492, r21556 and r21762 http://qi-hw.com/p/openwrt-xburst/cb8ef04 | 08:38 |
qi-bot | [commit] juhosg: backfire: swconfig: release switch in error path of swconfig_get_attr (backport of r21799) http://qi-hw.com/p/openwrt-xburst/87adaa5 | 08:38 |
qi-bot | [commit] juhosg: backfire: swconfig: fix lock imbalance in unregister_switch() (backport of r21780) http://qi-hw.com/p/openwrt-xburst/072e160 | 08:38 |
qi-bot | [commit] nbd: [backfire] backport the ssb dma device change from trunk http://qi-hw.com/p/openwrt-xburst/f210f1f | 08:38 |
qi-bot | [commit] nbd: [backfire] backport mac80211 updates from trunk http://qi-hw.com/p/openwrt-xburst/e775c43 | 08:38 |
qi-bot | [commit] jow: [backfire] merge r21820 and r21821 http://qi-hw.com/p/openwrt-xburst/b829756 | 08:38 |
qi-bot | [commit] jow: [backfire] merge r21823 http://qi-hw.com/p/openwrt-xburst/ba90215 | 08:38 |
qi-bot | [commit] jow: [backfire] merge r21833 http://qi-hw.com/p/openwrt-xburst/413e54e | 08:38 |
qi-bot | [commit] juhosg: backfire: [kernel] swconfig: Check vlan/port indexes for validity. (backport of r20811) http://qi-hw.com/p/openwrt-xburst/445022b | 08:38 |
qi-bot | [commit] juhosg: b | 08:38 |
qi-bot | [commit] Andres Calderon: pasive footprint added http://qi-hw.com/p/xue/675d06a | 08:49 |
qi-bot | [commit] Carlos Camargo: Adding bniaries for testing SIE http://qi-hw.com/p/nn-usb-fpga/33fba8a | 08:50 |
qi-bot | [commit] Carlos Camargo: Adding sgen to test programs under binaries directory http://qi-hw.com/p/nn-usb-fpga/a3fbdf8 | 08:57 |
qi-bot | [commit] Carlos Camargo: Adding a script for install basic test software http://qi-hw.com/p/nn-usb-fpga/885efd8 | 09:01 |
qi-bot | [commit] Carlos Camargo: Adding Flash scripts http://qi-hw.com/p/nn-usb-fpga/f91a910 | 09:07 |
qi-bot | [commit] Carlos Camargo: Adding usbtool configuration file http://qi-hw.com/p/nn-usb-fpga/933fa4c | 09:10 |
qi-bot | [commit] Werner Almesberger: Reuse some symbols and footprints from IDBG and gta02-core. http://qi-hw.com/p/ben-wpan/4aa4f44 | 14:51 |
qi-bot | [commit] Juan64Bits: Ethernet-phy and USB connected to FPGA http://qi-hw.com/p/xue/b22aa62 | 16:37 |
qi-bot | [commit] Andres Calderon: 66-tsop footprint added http://qi-hw.com/p/xue/095339f | 20:11 |
qi-bot | [commit] Juan64Bits: Adding librarys. http://qi-hw.com/p/xue/4c08652 | 20:15 |
qi-bot | [commit] Juan64Bits: Merge branch 'master' of projects.qi-hardware.com:xue http://qi-hw.com/p/xue/5b131af | 20:15 |
qi-bot | [commit] Werner Almesberger: Added AT86RF230 schematics symbol and some misc. stuff. http://qi-hw.com/p/ben-wpan/9eefe60 | 20:31 |
qi-bot | [commit] Andres Calderon: ddr component changed http://qi-hw.com/p/xue/7b759dd | 21:18 |
qi-bot | [commit] Andres Calderon: annotate http://qi-hw.com/p/xue/134f841 | 21:22 |
qi-bot | [commit] Andres Calderon: DRAM.sch2 deleted http://qi-hw.com/p/xue/0130eb3 | 21:22 |
qi-bot | [commit] Andres Calderon: ddr footprint changed http://qi-hw.com/p/xue/11ade0f | 22:30 |
qi-bot | [commit] Andres Calderon: annotate http://qi-hw.com/p/xue/171e409 | 22:56 |
qi-bot | [commit] Andres Calderon: early placement http://qi-hw.com/p/xue/a8fcbf0 | 23:25 |
qi-bot | [commit] Juan64Bits: Phy http://qi-hw.com/p/xue/5ce4404 | 13:16 |
---|---|---|
qi-bot | [commit] Juan64Bits: USB and MICROSD footprints added http://qi-hw.com/p/xue/0d12fb2 | 18:54 |
qi-bot | [commit] Werner Almesberger: Change wood size for 4th mold. Improved documentation. http://qi-hw.com/p/ben-counterweight/709838a | 20:28 |
qi-bot | [commit] kyak: initial port of kbd utilities (thanks to wryun) http://qi-hw.com/p/openwrt-packages/22ac691 | 22:02 |
qi-bot | [commit] David Kühling: Make Gforth's built-in assembler/disassembler work on non-mips architectures. http://qi-hw.com/p/openwrt-packages/f60cf47 | 22:02 |
qi-bot | [commit] bartbes: gmenu2x: Fixed file explorer/dialog http://qi-hw.com/p/openwrt-packages/51419fd | 22:02 |
qi-bot | [commit] bartbes: gmenu2x: Fixed dir up http://qi-hw.com/p/openwrt-packages/233fe22 | 22:02 |
qi-bot | [commit] David Kühling: switch to newer upstream snapshot with improved MIPS support. http://qi-hw.com/p/openwrt-packages/4fd3496 | 22:02 |
qi-bot | [commit] Xiangfu Liu: fix the problem with csqrt. http://qi-hw.com/p/openwrt-packages/a66f6ed | 22:02 |
qi-bot | [commit] Xiangfu Liu: Merge branch 'master' of projects.qi-hardware.com:openwrt-packages http://qi-hw.com/p/openwrt-packages/13b0dde | 22:02 |
qi-bot | [commit] Xiangfu Liu: fix the problem with csqrt. http://qi-hw.com/p/openwrt-packages/ea492be | 22:26 |
qi-bot | [commit] Andres Calderon: borrando basura http://qi-hw.com/p/xue/9fa83a7 | 22:31 |
qi-bot | [commit] Andres Calderon: cleanup http://qi-hw.com/p/xue/bd2d314 | 22:31 |
qi-bot | [commit] Andres Calderon: more fpga ddr lines has been connected http://qi-hw.com/p/xue/3678b1c | 23:53 |
qi-bot | [commit] David Kühling: switch to newer upstream snapshot with improved MIPS support. http://qi-hw.com/p/openwrt-packages/d50d5ae | 15:13 |
---|---|---|
qi-bot | [commit] Werner Almesberger: Added problem statement and described more details of the process. http://qi-hw.com/p/ben-counterweight/d497d67 | 17:42 |
qi-bot | [commit] Carlos Camargo: Fix some errors on silkscreen layer http://qi-hw.com/p/nn-usb-fpga/6c92e79 | 10:01 |
---|---|---|
qi-bot | [commit] Carlos Camargo: Adding SAKC logo http://qi-hw.com/p/nn-usb-fpga/f22d66d | 13:44 |
qi-bot | [commit] Werner Almesberger: Improved the mold for better yield. http://qi-hw.com/p/ben-counterweight/e910ea0 | 19:41 |
qi-bot | [commit] Xiangfu Liu: add fw_env.config for change kernel commandline http://qi-hw.com/p/openwrt-xburst/e67fd6e | 11:39 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: enable [setfont2] and [uboot-envtools] package in config http://qi-hw.com/p/openwrt-xburst/33d2680 | 12:09 |
qi-bot | [commit] Bas Wijnen: start wrapper; proper serial port baudrate http://qi-hw.com/p/iris/7659673 | 16:20 |
qi-bot | [commit] Xiangfu Liu: bootdelay 3 secs when press S http://qi-hw.com/p/openwrt-xburst/3482330 | 00:25 |
---|---|---|
qi-bot | [commit] Werner Almesberger: Work around the problem of not being able to just put index.html into Qi, and http://qi-hw.com/p/ben-scans/a339d67 | 21:26 |
qi-bot | [commit] Andres Calderon: ddr address and data has been conected to the FPGA http://qi-hw.com/p/xue/5197a47 | 21:50 |
qi-bot | [commit] Xiangfu Liu: update version numver. update debian/changelog http://qi-hw.com/p/xburst-tools/d795fb3 | 02:00 |
---|---|---|
qi-bot | [commit] Xiangfu Liu: fix typo of email address http://qi-hw.com/p/xburst-tools/8ce9d20 | 02:00 |
qi-bot | [commit] Xiangfu Liu: cleanup the debian/changelog, add new file ChangLog http://qi-hw.com/p/xburst-tools/1b9628a | 02:00 |
qi-bot | [commit] Xiangfu Liu: cleanup tmp folder when send INT TERM signal to get-orig-source.sh http://qi-hw.com/p/xburst-tools/e9cd9a3 | 02:00 |
qi-bot | [commit] Xiangfu Liu: [uboot-xburst] fix erase error when erasing redundant env nand http://qi-hw.com/p/openwrt-xburst/edf2ee3 | 03:57 |
qi-bot | [commit] bartbes: gmenu2x: Fixed file explorer/dialog http://qi-hw.com/p/openwrt-packages/d1208df | 08:13 |
qi-bot | [commit] bartbes: gmenu2x: Fixed dir up http://qi-hw.com/p/openwrt-packages/cfd20f8 | 09:32 |
qi-bot | [commit] bartbes: Changed the file browser to use / as root and added ability to see extensionless files (i.e. executables) http://qi-hw.com/p/gmenu2x/ba9af53 | 11:33 |
qi-bot | [commit] bartbes: Now only allows file browsing up to /, CARD_ROOT is /card/ http://qi-hw.com/p/gmenu2x/e9941dc | 11:49 |
qi-bot | [commit] Xiangfu Liu: create debian branch only for make debian package. http://qi-hw.com/p/xburst-tools/71ed21e | 11:54 |
qi-bot | [commit] Lars-Peter Clausen: Add gpio chager driver http://qi-hw.com/p/qi-kernel/97d812a | 12:16 |
qi-bot | [commit] Lars-Peter Clausen: MIPS: JZ4740: Add qi_lb60 board support http://qi-hw.com/p/qi-kernel/d88c52a | 12:16 |
qi-bot | [commit] Lars-Peter Clausen: Add n516 board support http://qi-hw.com/p/qi-kernel/41057ef | 12:16 |
qi-bot | [commit] Lars-Peter Clausen: Add n526 board support http://qi-hw.com/p/qi-kernel/2888489 | 12:16 |
qi-bot | [commit] Lars-Peter Clausen: ASoC: JZ4740: Add qi_lb60 board driver http://qi-hw.com/p/qi-kernel/c452865 | 12:16 |
qi-bot | [commit] Lars-Peter Clausen: Add N516 sound SoC board driver http://qi-hw.com/p/qi-kernel/3765c7b | 12:16 |
qi-bot | [commit] Lars-Peter Clausen: Add N526 sound SoC board driver http://qi-hw.com/p/qi-kernel/636d159 | 12:16 |
qi-bot | [commit] Maarten ter Huurne: MMC: jz4740: Fixed card change detection. http://qi-hw.com/p/qi-kernel/f1f0dbd | 12:16 |
qi-bot | [commit] Andres Calderon: micron ddr ibis model added http://qi-hw.com/p/xue/f386b01 | 18:32 |
qi-bot | [commit] Andres Calderon: micron_ddr_512Mb models added http://qi-hw.com/p/xue/5528435 | 18:32 |
qi-bot | [commit] Andres Calderon: micron_ddr_512Mb.lib fixed http://qi-hw.com/p/xue/a29352d | 21:38 |
qi-bot | [commit] Andres Calderon: 60fbga_ddr.fpd added http://qi-hw.com/p/xue/d6bbd2d | 21:38 |
qi-bot | [commit] Andres Calderon: 60fbga_ddr.mod added http://qi-hw.com/p/xue/1e01020 | 22:24 |
qi-bot | [commit] Andres Calderon: ddr mobile replaced by ddr http://qi-hw.com/p/xue/3e25e8d | 22:24 |
qi-bot | [commit] Xiangfu Liu: add asound.state to data/qi_lb60/etc http://qi-hw.com/p/openwrt-xburst/3244d5e | 03:29 |
---|---|---|
qi-bot | [commit] kyak: initial port of kbd utilities (thanks to wryun) http://qi-hw.com/p/openwrt-packages/bef3878 | 03:49 |
qi-bot | [commit] David Kühling: Make Gforth's built-in assembler/disassembler work on non-mips architectures. http://qi-hw.com/p/openwrt-packages/915bd10 | 12:27 |
qi-bot | [commit] kyak: backgammon of bsd-games http://qi-hw.com/p/openwrt-packages/48e547c | 04:31 |
---|---|---|
qi-bot | [commit] kyak: backgammon of bsd-games http://qi-hw.com/p/openwrt-packages/d696302 | 04:31 |
qi-bot | [commit] Neil Stockbridge: Merge branch 'master' of git@projects.qi-hardware.com:openwrt-packages http://qi-hw.com/p/openwrt-packages/ad78aa7 | 04:38 |
qi-bot | [commit] Neil Stockbridge: initial port of Freedroid http://qi-hw.com/p/openwrt-packages/88b28ae | 04:38 |
qi-bot | [commit] Xiangfu Liu: convert all icon to 32x32, add one termnial apps icon http://qi-hw.com/p/openwrt-xburst/a3542cd | 05:15 |
qi-bot | [commit] Xiangfu Liu: convert all icon to 32x32, add one terminal apps icon http://qi-hw.com/p/openwrt-xburst/448990f | 05:16 |
qi-bot | [commit] kyak: sound now works in freedroid, but only after enabling swap (takes quite http://qi-hw.com/p/openwrt-packages/1ad8df0 | 06:21 |
qi-bot | #qi-hardware-test [commit] Xiangfu Liu: [links] move to Web submenu http://qi-hw.com/p/openwrt-packages/5efb573 | 09:38 |
qi-bot | #qi-hardware-test [commit] Xiangfu Liu: [guile] fix compile error by John Moore http://qi-hw.com/p/openwrt-packages/5492fb2 | 09:38 |
qi-bot | [commit] Xiangfu Liu: [fbgrab] fix typo http://qi-hw.com/p/openwrt-packages/819508f | 11:16 |
qi-bot | [commit] David Kühling: a new joe package that includes all the emulation modes for Emacs, Pico etc. http://qi-hw.com/p/openwrt-packages/8cd0be9 | 11:24 |
qi-bot | [commit] David Kühling: Merge branch 'master' of projects.qi-hardware.com:openwrt-packages http://qi-hw.com/p/openwrt-packages/eef6ed8 | 11:24 |
qi-bot | [commit] Mirko Vogt: NanoMap: adjust Makefile to use the new and more generic way of handling projects using qmake, remove BROKEN flag http://qi-hw.com/p/openwrt-packages/b73cede | 12:01 |
qi-bot | [commit] Mirko Vogt: NanoMap: update to latest git revision http://qi-hw.com/p/openwrt-packages/9e13344 | 12:07 |
8036 matches in 4783 log files with 373437 lines (5.5 seconds).
Generated by irclogsearch.py 2.9.2 by Marius Gedminas - find it at mg.pov.lt!