arossDOTme | well it's bed time again. Any reply's will get read from the logs. | 00:26 |
---|---|---|
arossDOTme | I gave an incorrect amount of how much I copied. It was more like 25GB. | 02:26 |
xiangfu | wpwrak, a new version of fped uploaded to Debian: http://packages.debian.org/unstable/electronics/fped. Version: 0.1+201210-1 | 03:47 |
wpwrak | xiangfu: so you got through the bureaucracy ? congratulations ! :) | 07:34 |
lindi- | xiangfu: every month we have a free software meetup here in Helsinki. Yesterday was the third time that we spent browsing fpgatools source. There are quite a free FPGA fans here :) | 08:33 |
lindi- | xiangfu: do you know if Wolfgang is on IRC btw? | 08:34 |
wolfspra1l | I'm here, and luckily just now reading :-) | 08:34 |
lindi- | wolfspra1l: ok :) | 08:34 |
wolfspra1l | taking a break from wires :-) | 08:34 |
wolfspra1l | ckpin, clkindirect, clkfeedback... | 08:34 |
lindi- | people were wondering if it'd be possible to have a more declarative approach instead of all that C code but I guess it's hard to make abstractions when you are reverse engineering and don't know the complete picture in advance | 08:35 |
wolfspra1l | yes, I'm learning | 08:35 |
wolfspra1l | and sure, I would like to make the code shorter, first | 08:36 |
wolfspra1l | and once the structure becomes more clear, then bring in a little bison etc. | 08:36 |
wolfspra1l | what are you guys following, and most likely - what would you like to do with an fpga? | 08:39 |
xiangfu | wpwrak, (bureaucracy) not finish yet. there are "fpgatools-right" missing. :-) | 08:39 |
wolfspra1l | bbiab. in general, please always feel free to ping me in this channel when you have any questions | 08:41 |
xiangfu | lindi-, you are already chatting. :-) | 08:43 |
xiangfu | lindi-, is there any open-design from those free FPGA fans. you know like `azonenberg-devboards`. using KiCAD etc? (http://azonenberg-devboards.googlecode.com/) | 08:44 |
lindi- | xiangfu: no idea | 08:44 |
xiangfu | lindi-, ok. I am trying to look into more open-design boards(kicad, fpga chips) for learning. | 08:46 |
lindi- | xiangfu: I'm personally way too busy to look at those but I fortunately have time to organize a meeting every month :) | 08:47 |
qi-bot | [commit] Xiangfu: Fix compile warnings (master) http://qi-hw.com/p/xburst-tools/5ade9f1 | 09:40 |
qi-bot | [commit] Xiangfu: bump version (master) http://qi-hw.com/p/xburst-tools/bf5b9f6 | 09:40 |
qi-bot | The build was successful: http://fidelio.qi-hardware.com/~xiangfu/build-nanonote/openwrt-xburst.full_system-20121108-0830 | 15:36 |
qi-bot | [commit] Marcos Paulo de Souza: drivers/power/jz4740-battery.c: Use devm_kzalloc (jz-3.6) http://qi-hw.com/p/qi-kernel/6c33cc3 | 19:43 |
qi-bot | [commit] Marcos Paulo de Souza: drivers/power/jz4740-battery.c: Use devm_request_and_ioremap (jz-3.6) http://qi-hw.com/p/qi-kernel/969f08b | 19:43 |
kristianpaul | xiangfu: http://numato.com/kicad-more-complex-boards-our-experiment-with-spartan6-csg225 | 20:22 |
kristianpaul | i like this board, have a pic32 :) | 20:24 |
arossDOTme | Can I have a separate partition on my sd card for the OS? I want to try the new image by booting it of my sd card. Do I hope a second partition won't have negative affects on my sd card (see logs for my prev gpt partition table sd card problem.)? | 23:51 |
--- Sat Nov 10 2012 | 00:00 |
Generated by irclog2html.py 2.9.2 by Marius Gedminas - find it at mg.pov.lt!