#qi-hardware IRC log for Thursday, 2012-10-18

Syaoran_kunHello, after:mmc0: 07:36
Syaoran_kunnew SD card at address db2707:37
Syaoran_kunHow can I mount it?07:37
viricmount /dev/mmc*1 /mnt ? something like that07:39
Syaoran_kunYeah, I used to write something like mount /dev/mmcblk0p1 /mnt/card/ but doesn't work anymore.07:42
mththat should work; it would be worth checking "dmesg" why it wouldn't mount it07:46
Syaoran_kun[30.890000] mmc0: new SD card at address bd2707:54
Syaoran_kun[30.910000] mmcblk0: mmc0:bd27 SD02G 1.83 GiB07:54
Syaoran_kun[30.940000] mmcblk0:07:54
Syaoran_kunroot@BenNanoNote:/usr/bin# mount /dev/mmcblk0p1 /mnt/card/07:54
Syaoran_kunmount: mounting /dev/mmcblk0p1 on /mnt/card/ failed: No such file or directory07:54
Syaoran_kunI'm using the latest firmware.07:54
viricSyaoran_kun: fdisk -l /dev/mmcblk007:57
viricls -l /mnt/card07:58
Syaoran_kunLast line of "fdisk -l /dev/mmcblk0":08:03
Syaoran_kunPartition table entries aren't in disk order08:03
Syaoran_kunls: /mnt/card: No such file or directory08:03
mthit looks like the card is unpartitioned08:11
mthcan you mount /dev/mmcblk0 itself?08:12
Syaoran_kunYeah, it work using: mount /dev/mmcblk0 /mnt08:17
Syaoran_kunWell now, /dev/mmcblk0 /mnt/card as I did mkdir /mnt/card08:20
viricweird card08:29
virichow did you get a card without partitions?08:29
Syaoran_kunI don't know. Is a cheap Kingston SD.08:46
viricdidn't you touch the partitions or format  it?08:49
viricis all as comming from the shop?08:49
viricmaybe you formatted the whole block device, instead of the partition?08:51
viric(I took 'no' as an answer to my last question' :)08:51
Syaoran_kunhehe, I didn't touch the partitions or formated it.08:52
virichm ok08:53
viricthen that's the way it may be set to work.08:53
xiangfuSyaoran_kun, are you sure the memcard is working? have you to with other pc?08:57
xiangfuhave you try it with other pc/device?08:57
viricI have a sony e-reader, which is seen as a usb storage device, and it came unpartitioned too. I've never connected it to a windows, but I guess it's meant to work09:00
Syaoran_kunDon't worry, is now working fine. Thanks for the help.09:01
qi-botThe build was successful: http://fidelio.qi-hardware.com/~xiangfu/build-nanonote/openwrt-xburst.minimal-20121017-1551 23:53
--- Fri Oct 19 201200:00

Generated by irclog2html.py 2.9.2 by Marius Gedminas - find it at mg.pov.lt!