#qi-hardware IRC log for Thursday, 2012-08-23

DocScrutinizer05whatever the idea, it probably won't pan out01:59
DocScrutinizer05I finally have to insert an modified stuxnet into TimRiker's server bios, since there's no other proper way to restart the bot when it got stuck in freenode mess 8like services outage today)02:00
DocScrutinizer05;-D02:00
DocScrutinizer05the up- and downsides of a bot known to >150 channels02:02
DocScrutinizer05since 200202:02
qi-bot[commit] Werner Almesberger: cameo/: new command "flip" to flip paths on the X or Y axis (master) http://qi-hw.com/p/cae-tools/a030eff12:05
qi-botThe build was successful: http://fidelio.qi-hardware.com/~xiangfu/build-nanonote/openwrt-xburst.minimal-20120822-1032 12:51
kristianpaulevening22:10
kristianpaulwas wondering if anyone is using the navigation board from pulser as a IMU?22:11
wpwrakfirst try at making a 3D shape that's milled from both sides: http://downloads.qi-hardware.com/people/werner/tmp/pgm-case-1-top.jpg22:51
wpwrakand http://downloads.qi-hardware.com/people/werner/tmp/pgm-case-1-bot.jpg22:51
wpwrakthey're within about +/- 0.5 mm of each other. i calculated slack for up to 2 mm :) maybe i can improve the accuracy by adjusting the coordinates for the 2nd piece (there are two per workpiece)22:53
kristianpaulnot bad23:21
wpwrakwith two identical structures the flipping isn't to bad. i can just pick a feature (e.g., a side) in one, mark it, pick the corresponding feature on the other structure and mark it too, then flip and align the features such that 1 is where 2 was and vice versa23:32
wpwrakplus, i align the workpiece with the edge of the support plate23:33
wpwrakthat should work for a fair number of items23:33
--- Fri Aug 24 201200:00

Generated by irclog2html.py 2.9.2 by Marius Gedminas - find it at mg.pov.lt!