#qi-hardware IRC log for Sunday, 2012-05-20

qi-botThe build was successful: http://fidelio.qi-hardware.com/~xiangfu/build-nanonote/openwrt-xburst.full_system-20120518-1837 00:32
qi-bot[commit] Xiangfu: cgminer: add a simple monitor file for cron job (master) http://qi-hw.com/p/openwrt-packages/f12878f10:05
morandinn1hi all 13:21
morandinn1someone there ?13:21
kristianpaulhi13:23
kristianpaulmorning13:23
morandinn1hi kristianpaul :)13:23
morandinn1i would like if im in the good channel to talk about computers hardware or not 13:24
morandinn1before asking :))13:24
wolfspra1lplease ask13:24
morandinn1ok13:24
morandinn1i have a little problem with my Processor & graphical card 13:25
morandinn1and i would like know if there is a tip to make them work in 100% of capacity's13:25
morandinn1NVIDIA GeForce GTX 570 & i7 Processor13:25
kristianpaulhmm13:25
GNUtoo-desktop#hardware13:26
morandinn1ok thx kristianpaul13:26
kristianpaulinlcluded lna in the osmosdr board is an interesting plus13:36
kristianpaulnot couting better xtal13:36
wpwrakwolfspra1l: hmm, i've been thinking about your plans of a price adjustment for qi-hw things ... for the ben, that doesn't sound too nice since there would be no other change. but perhaps you could bundle it with a bag of UBBs and such ?14:10
wolfspra1lhe14:10
wolfspra1lgood idea14:10
wpwrakwould still have to find a nice way to prepare the cable. this sort of thing would probably be too expensive and bulky to add to the bundle: http://saberyhacer.com/wp-content/uploads/2011/01/pinza-pela-cable-150x100.jpg14:14
wpwrakbut perhaps a cutter and a bit of technique would do, too14:15
wpwrakthere are also cables that have their end(s) pre-cut (so that the isolation can be easily pulled off). that could be an option too, if you can find a source for that14:16
wpwrakthat would produce something that's pretty easy to put together14:16
wolfspra1lI'm not sure. I think the idea of adding something is nice, but I won't proceed with anything practical right now.14:28
wolfspra1lit's more important to keep the sw images clean, stable and updated14:28
wpwrakonly something impractical ? :)14:29
wolfspra1lonly talk, I like the idea14:29
Action: DocScrutinizer moos to the sun14:29
wpwrakah ;-)14:29
wolfspra1lneed to find out how many ubb's david still has14:29
wpwrakor just make your own. could be fun as a test run for entirely kicad-generated stuff :) (well, maybe it's even a bit too simple for that)14:30
wpwrakah wait, i think you already did that. mmone-jtag-serial was manufactured from the kicad design, right ?14:37
wolfspra1lhmm14:41
wolfspra1lyes I think so :-)14:41
DocScrutinizerwpwrak: you noticed Harald has fixed om.org?15:32
DocScrutinizer*finally*15:33
wpwrakyeah, i know. a good deed :)15:33
wpwrakhmm. making schhist readable ... what may work is 1) compress vertically by "folding" multiple commits into one line, with a button to unfold/expand. 2) compress horizontally by scaling to smaller thumbnails.23:35
wpwrakprobably needs rewriting schhist2web in a better language than shell, though. it's already stretching the limits a bit ...23:36
wpwrakwolfspraul: how about setting   SCHHIST_ORDER=m1:POWER:FPGA_Dec:BANK0:BANK1:BANK2:BANK3:EXPANSION_RESET:DRAM:NOR_FLASH:AUDIO:DVI-I:VIDEO_IN:MISC_CONTROL:ETHERNET:USB_A-B:USB_C-D:USB_E-F:MISC23:38
wpwrak? that would produce the same order as in m1r4.pdf23:38
--- Mon May 21 201200:00

Generated by irclog2html.py 2.9.2 by Marius Gedminas - find it at mg.pov.lt!