#qi-hardware IRC log for Sunday, 2011-06-12

qi-botThe build has FAILED, see log here: http://fidelio.qi-hardware.com/~xiangfu/compile-log/openwrt-xburst.full_system-06112011-0558/00:14
qi-bot[commit] Werner Almesberger: prod/atusb (TRX_OFF): C5 was "x" for no good reason - changed to "H" http://qi-hw.com/p/ben-wpan/fb80f5102:05
qi-bot[commit] Werner Almesberger: prod/atusb (TRX_OFF): walk all GPIOs. Also, use that MISO is Z if nSS = H http://qi-hw.com/p/ben-wpan/5f3cc7602:05
qi-bot[commit] Werner Almesberger: prod/atusb: P_ON test turned out to be unreliable - skip it for now http://qi-hw.com/p/ben-wpan/13f4a3502:05
qi-bot[commit] Werner Almesberger: prod/atben (gpio_ben): in TRX_OFF, use that MISO is Z if nSS = H http://qi-hw.com/p/ben-wpan/d135eb202:05
qi-bot[commit] Werner Almesberger: prod/doc/setup.hmac: changed boot.hex and atusb.bin to the ce16a16 versions http://qi-hw.com/p/ben-wpan/3e37af610:29
qi-bot[commit] Werner Almesberger: prod/: P_ON test for atusb can't work as intended ... because we're not in P_ON http://qi-hw.com/p/ben-wpan/39c372510:49
whooohi, I'm having a problem starting from a SD card, I get the error "VFS: Cannot open root device", but then it lists possible partitions to boot from, and mmcblk0p1 is there, what could the problem be?12:56
larscwrong filesystem13:11
whoooI double checked that, ext2, rootfstype is set to ext2 too13:15
whoooext2 is compiled into the kernel too13:17
larscare there any other messages?13:47
DocScrutinizeryay, silent here18:13
kristianpaulnot at all18:20
kristianpaulbut seems i should not do decimation.. 18:21
whooolarsc: well, not really, first that it can't open the root device, then a list of partitions that it should be able to use and then that it can't mount the root fs18:22
whitequarkDocScrutinizer: have you read my PM's?18:24
--- Mon Jun 13 201100:00

Generated by irclog2html.py 2.9.2 by Marius Gedminas - find it at mg.pov.lt!