#qi-hardware IRC log for Saturday, 2011-06-04

Fusinhi qioto's ;)09:16
Fusinhi luna09:33
Action: whitequark was looking at Linux Symposium keynote speakers and spotted a familiar name11:27
whitequarkI wonder what Werner was talking about11:27
wpwrakwhitequark: that would have been about Openmoko11:54
whitequarkwpwrak: "would have been"? so you didn't really talked there?12:13
wpwrakno no, i did12:30
wpwrakthat the plusquamperfect, not the irrealis ;-)12:31
wpwraks/that/that was/12:31
wpwrakdunno how you call the use of "would" there. it's basically a means of expressing a mild uncertainty, but in the context of the statement, not the underlying fact12:35
Aylahello12:50
wolfspraulhi12:51
AylaI completed my job on the install_locations branch of gmenu2x12:51
Aylacan somebody review/test it, to see if we can merge it back into the master branch?12:51
Aylait works good for opendingux, but it's not been tested on nanonote*12:54
wpwrakgrmbl. three atusb boards, one incompletely built and apparently with some "novelty" problem, one i know i had reworked to death but that seems to be even a little more dead not than the last time i tried, and finally the one i've been going all my development work on lately, which somehow lost the transceiver reset line yesterday. now, how to test the gpios with that collection of brokenness ? :-(13:03
wpwrakof course, all the older (incompatible) boards work perfectly. in murphy we trust ...13:03
whitequarkwpwrak: oh, the grammar. that never been my strong point :/13:35
wpwrakwhitequark: well, i'm not even sure about the grammar there. in the end it's all idiomatic :)13:40
qi-bot[commit] Werner Almesberger: libatrf: added SRAM access functions http://qi-hw.com/p/ben-wpan/472e18214:20
qi-bot[commit] Werner Almesberger: tools/lib/atben.c: added SRAM access to atben driver http://qi-hw.com/p/ben-wpan/6b447f814:20
qi-bot[commit] Werner Almesberger: atusb/fw/ep0.c: fixed ATUSB_SRAM_READ http://qi-hw.com/p/ben-wpan/b73343114:20
qi-bot[commit] Werner Almesberger: tools/lib/atusb.c: added SRAM access to atusb driver http://qi-hw.com/p/ben-wpan/4aff7af14:20
qi-bot[commit] Werner Almesberger: tools/lib/atusb.c: added SRAM access to atusb driver http://qi-hw.com/p/ben-wpan/565fadf14:20
qi-bot[commit] Werner Almesberger: atrf-gpio: new utility to directly access GPIOs (for now atben-only) http://qi-hw.com/p/ben-wpan/492475514:20
qi-bot[commit] Werner Almesberger: prod/atben: added GPIO test http://qi-hw.com/p/ben-wpan/59469a414:20
qi-bot[commit] Werner Almesberger: atusb/fw: new request ATUSB_GPIO for direct GPIO access http://qi-hw.com/p/ben-wpan/370cd3214:20
qi-bot[commit] Werner Almesberger: tools/atrf-gpio/atusb.c: ATUSB driver (using ATUSB_GPIO) http://qi-hw.com/p/ben-wpan/b0f3cb014:20
qi-bot[commit] Werner Almesberger: tools/atrf-gpio/atben.c: made error report easier to read http://qi-hw.com/p/ben-wpan/6bf03fe14:20
qi-bot[commit] Werner Almesberger: prod/doc/test.hmac: expanded GPIO scan section (in progress) http://qi-hw.com/p/ben-wpan/d1dd61114:20
wejphow do i select uclibc 0.9.32 in the openwrt toolchain? with 0.9.30 programs do not seem to work in the current firmware image17:56
wejpnobody around?20:06
wpwrakall the masters of the toolchain are probably out drinking ;-)20:09
wejphehe20:10
qi-botThe build was successfull, see images here: http://fidelio.qi-hardware.com/~xiangfu/compile-log/openwrt-xburst.full_system-06032011-2310/20:19
--- Sun Jun 5 201100:00

Generated by irclog2html.py 2.9.2 by Marius Gedminas - find it at mg.pov.lt!