| xakh | hey | 02:20 |
|---|---|---|
| xakh | anyone in here good with gmenu2x? | 02:20 |
| wolfspraul | I think zear? but he's not in the channel it seems | 02:21 |
| xakh | damn. | 02:21 |
| xakh | never on when Zear is. | 02:21 |
| Hela | Enter text here...HI there | 04:32 |
| Hela | I just want to ask a question regarding my HP cmputer\ | 04:33 |
| Hela | anybody there? | 04:34 |
| Hela | when I switch on my computer there is some failure: Non system disk ot disk error | 04:35 |
| Hela | what shall I do? | 04:35 |
| Hela | it has no operation system | 04:35 |
| Hela | I want to install it... | 04:35 |
| nebajoth | root@ben:~ # apt-get install nano | 09:45 |
| nebajoth | Bus errorackage lists... 0% | 09:45 |
| nebajoth | :| | 09:45 |
| nebajoth | that's not even a real error msg. | 09:45 |
| nebajoth | that's two real error msgs fused into an unholy chimera. | 09:45 |
| kristianpaul | tuxbrain_away: ping | 13:27 |
| qi-commits | Maarten ter Huurne: jz4740-i2s: Fixed indentation. http://qi-hw.com/p/qi-kernel/ac9c0fc | 17:01 |
| qi-commits | Maarten ter Huurne: jz4740-i2s: Declare that both the JZ4740 AIC and its internal codec are capable of 48 kHz output. http://qi-hw.com/p/qi-kernel/43d2cfc | 17:01 |
| qi-commits | Maarten ter Huurne: jz4740-i2s: Corrected DMA width constants. This driver relied on the wrong encoding in arch/mips/include/asm/mach-jz4740/dma.h, which were fixed recently. http://qi-hw.com/p/qi-kernel/64c7b5b | 17:01 |
| qi-commits | Maarten ter Huurne: jz4740_dma: Fixed source/destination width encoding. http://qi-hw.com/p/qi-kernel/3e18ee3 | 17:01 |
| qi-commits | Yauhen Kharuzhy: jz4740_udc: Fix recursive spinlocks (partially fixes: #853) http://qi-hw.com/p/qi-kernel/7e391cd | 17:01 |
| qi-commits | Maarten ter Huurne: jz4740_dma: Only set no-descriptor flag when enabling the channel. Otherwise, there can be data loss using the transfer (seen with SLCD). http://qi-hw.com/p/qi-kernel/cd0f502 | 17:01 |
| larsc | mth: could you have a look and see if anything is missing | 17:01 |
| mth | flushing the dcache, or do you have an alternative commit that addresses that issue? | 17:03 |
| larsc | no. but it's not really neccessary. unless you want to use the bounce buffer | 17:04 |
| mth | there are other drivers using that call, afaik | 17:04 |
| mth | at least XFS, although probably no-one is going to use that on a mobile device | 17:05 |
| mth | but maybe more (either now or in the future) | 17:05 |
| mth | by the way, is there a plan to integrate the qi-kernel patches into the mainline kernel at some point? | 17:06 |
| larsc | yes | 17:06 |
| larsc | soon(tm) | 17:06 |
| larsc | i wanted to send them for review after the merge window | 17:06 |
| mth | in that case, maybe the i2c driver from OpenInkpot would be good to include as well | 17:07 |
| mth | it's a bit early for the SLCD driver, but that might be a candidate in the future | 17:08 |
| mth | speaking of the SLCD, some of the commits on that apply to the code that I copied from your LCD driver | 17:08 |
| mth | for example part of 558d011e3bbf77ae683d | 17:09 |
| mth | about the green offset in 15 and 16 bpp formats | 17:09 |
| mth | the board headers are not really needed anymore, I think, for example in 5afb3e8c011764410854 I removed board-a320.h | 17:10 |
| mth | default keyboards: I don't know if 28b9083b245ab4a3b1be is the right approach, but it would make sense not to select the AT keyboard by default on non-x86 systems | 17:14 |
| mth | that's all | 17:16 |
| mth | so you got all the commits that could be cherry picked, the other commits I mentioned are changes that could only be merged manually | 17:17 |
| larsc | good | 17:18 |
| mth | about the i2c driver: it does not give the same results as the GPIO I2C driver on Dingoo, but I don't know whether that is because of a driver problem or strange hardware | 17:18 |
| mth | for example the list of devices found with GPIO I2C is smaller, but far more likely to be true | 17:19 |
| mth | but accessing the Chrontel TV-out encoder works with either driver | 17:19 |
| larsc | hm | 17:26 |
| xakh | hey bitches | 18:27 |
| xakh | what's everybody doin? | 18:27 |
| xakh | hey guys | 21:38 |
| xakh | anyone wanna help me put PRBoom on my Gmenu2X home menu? | 21:39 |
| qi-commits | Xiangfu Liu: code style cleanup http://qi-hw.com/p/xburst-tools/ad2afb0 | 23:27 |
| xakh | xiangfu: with a new code commit, does that mean I have to reflash again? :( | 23:44 |
| xiangfu | xakh: no. when there is office release image come out. you can reflash again :-) | 23:45 |
| --- Mon May 24 2010 | 00:00 | |
Generated by irclog2html.py 2.9.2 by Marius Gedminas - find it at mg.pov.lt!